| /Zephyr-latest/samples/sensor/i3g4250d/src/ |
| D | main.c | 17 struct sensor_value setting; in set_sampling_frequency() local
19 (void)sensor_value_from_double(&setting, sampling_frequency); in set_sampling_frequency()
22 SENSOR_CHAN_GYRO_XYZ, SENSOR_ATTR_SAMPLING_FREQUENCY, &setting); in set_sampling_frequency()
|
| /Zephyr-latest/doc/services/device_mgmt/smp_groups/ |
| D | smp_group_3.rst | 15 | ``0`` | Read/write setting |
17 | ``1`` | Delete setting |
28 Read/write setting command
31 Read/write setting command allows updating a setting entry on a device or
32 getting the current value of a setting from a device.
34 Read setting request
37 Read setting request header fields:
63 | "name" | string of the setting to retrieve |
68 Read setting response
71 Read setting response header fields:
[all …]
|
| /Zephyr-latest/subsys/stats/ |
| D | Kconfig | 17 setting is disabled, statistics are assigned generic names of the
18 form "s0", "s1", etc. Enabling this setting simplifies debugging,
27 setting is disabled, statistics are assigned generic names of the
28 form "s0", "s1", etc. Enabling this setting simplifies debugging,
|
| /Zephyr-latest/soc/ |
| D | Kconfig.v1 | 8 SoC name. The value of this setting must be defined by the selected
14 SoC series. The value of this setting must be defined by the selected
20 SoC family. The value of this setting must be defined by the selected
|
| D | Kconfig.v2 | 15 SoC name. The value of this setting must be defined by the selected
21 SoC series. The value of this setting must be defined by the selected
27 SoC family. The value of this setting must be defined by the selected
|
| /Zephyr-latest/drivers/clock_control/ |
| D | clock_control_nrf2_hsfll.c | 33 enum dvfs_frequency_setting setting; member
37 .setting = DVFS_FREQ_LOW,
41 .setting = DVFS_FREQ_MEDLOW,
45 .setting = DVFS_FREQ_HIGH,
89 required_setting = clock_options[to_activate_idx].setting; in hsfll_work_handler()
|
| /Zephyr-latest/subsys/net/lib/http/ |
| D | Kconfig | 54 This setting determines the number of http services that the server supports.
61 This setting determines the maximum number of HTTP/2 clients that the server can handle at once.
68 This setting determines the maximum number of HTTP/2 streams for each client.
75 This setting determines the buffer size for each client.
91 This setting determines the maximum length of the HTTP URL that the server can process.
98 This setting determines the maximum length of the HTTP Content-Length field.
105 This setting determines the maximum length of HTTP header field or value
115 This setting determines the maximum length of an HTTP/2 header frame
124 This setting enables the HTTP server to capture selected headers that have
133 This setting determines the size of the (per-client) buffer used to store
[all …]
|
| /Zephyr-latest/subsys/net/lib/lwm2m/ |
| D | Kconfig.ipso | 24 This setting establishes the total count of IPSO Temperature
53 This setting establishes the total count of IPSO Generic
93 This setting establishes the total count of IPSO Humidity
124 This setting establishes the total count of IPSO Pressure
149 setting to be controlled as a % between 0 and 100. An optional color
150 setting enables a string to be used to indicate the desired color.
157 This setting establishes the total count of IPSO Light Control
170 This setting establishes the total count of IPSO Accelerometer
199 This setting establishes the total count of IPSO Buzzer
227 This setting establishes the total count of IPSO Timer
[all …]
|
| /Zephyr-latest/drivers/modem/ |
| D | Kconfig.quectel-bg9x | 14 Choose this setting to enable quectel BG9x LTE-CatM1/NB-IoT modem
37 This setting is used to set the APN name for the network connection
45 This setting is used to set the User name for the network connection
53 This setting is used to set the Password for the network connection
|
| D | Kconfig.ublox-sara-r4 | 15 Choose this setting to enable u-blox SARA-R4 LTE-CatM1/NB-IoT modem
59 This setting is used in the AT+CGDCONT command to set the APN name
79 This setting is used in the AT+COPS command to set the MCC/MNO
96 Choose this setting to use a modem GPIO pin as network indication.
104 This setting is used to configure one of the modem's GPIO pins
|
| D | Kconfig.wncm14a2a | 12 Choose this setting to enable Wistron WNC-M14A2A LTE-M modem driver.
35 This setting is used in the AT%PDNSET command to set the APN name
|
| /Zephyr-latest/subsys/lorawan/services/ |
| D | Kconfig | 50 Initial setting for clock synchronization periodicity in seconds.
55 Default setting: 24h.
98 This setting has significant influence on RAM usage.
117 This setting has significant influence on RAM usage. If the exact
138 This setting has significant influence on RAM usage. If the exact
156 This setting has significant influence on RAM usage.
167 for multicast session key exchange and setting up a class C session.
|
| /Zephyr-latest/drivers/dac/ |
| D | dac_dacx3608.c | 63 uint16_t mask, bool setting) in dacx3608_reg_update() argument
73 if (setting) { in dacx3608_reg_update()
92 bool setting = false; in dacx3608_channel_setup() local
117 BIT(channel_cfg->channel_id), setting); in dacx3608_channel_setup()
|
| /Zephyr-latest/subsys/bluetooth/audio/ |
| D | Kconfig.mcs | 158 bool "Support setting Track Position"
161 This option enables support for setting Track Position.
170 bool "Support setting Playback Speed"
173 This option enables support for setting Playback Speed.
188 bool "Support setting Playing Order"
191 This option enables support for setting Playing Order.
206 bool "Support setting Media Control Point"
209 This option enables support for setting Media Control Point.
|
| /Zephyr-latest/samples/net/virtual/ |
| D | Kconfig | 23 skip setting static value.
40 skip setting static value.
|
| /Zephyr-latest/doc/develop/sca/ |
| D | index.rst | 8 The build setting :makevar:`ZEPHYR_SCA_VARIANT` can be used to specify the SCA
23 possibility to add additional folders to the :makevar:`SCA_ROOT` setting.
50 :makevar:`SCA_TOOL` can be set as a regular CMake setting using
|
| /Zephyr-latest/arch/arm/core/cortex_m/ |
| D | relay_vector_table.ld | 20 /* When setting TBLOFF in VTOR we must align the offset to the number of
25 * setting in any Cortex-M implementation (might not be required in every
|
| /Zephyr-latest/drivers/ieee802154/ |
| D | Kconfig | 46 bool "Support setting Vendor Organizationally Unique Identifier"
48 This option enables setting custom vendor
96 bool "Support for selective TX channel setting"
98 Enable support for selectively setting TX channel for every timed transmission request.
|
| /Zephyr-latest/tests/drivers/rtc/rtc_api/ |
| D | Kconfig | 13 Set the RTC_ALARM_TIME_MASK_ bitmask to use when setting
|
| /Zephyr-latest/subsys/usb/device/class/ |
| D | Kconfig.template.composite_device_number | 1 # Kconfig template file for setting device count for
|
| /Zephyr-latest/subsys/usb/device_next/class/ |
| D | Kconfig.template.instances_count | 1 # Kconfig template file for setting instances count for various USB classes.
|
| /Zephyr-latest/doc/connectivity/networking/api/ |
| D | dns_resolve.rst | 21 The multicast DNS (mDNS) client resolver support can be enabled by setting
27 enabled by setting the :kconfig:option:`CONFIG_LLMNR_RESOLVER` Kconfig variable.
|
| /Zephyr-latest/cmake/modules/ |
| D | ccache.cmake | 4 # it by setting USE_CCACHE=0.
|
| /Zephyr-latest/tests/bsim/bluetooth/host/att/pipeline/dut/ |
| D | Kconfig | 4 # This file adds prompts to allow setting the symbols in a
|
| /Zephyr-latest/soc/espressif/esp32s2/ |
| D | Kconfig.mac | 20 When using the default (Espressif-assigned) base MAC address, either setting can be used.
21 When using a custom universal MAC address range, the correct setting will depend on the
|
