1 /** 2 ****************************************************************************** 3 * @file stm32g0xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 * This file should be copied to the application folder and renamed 7 * to stm32g0xx_hal_conf.h. 8 ****************************************************************************** 9 * @attention 10 * 11 * Copyright (c) 2018 STMicroelectronics. 12 * All rights reserved. 13 * 14 * This software is licensed under terms that can be found in the LICENSE file 15 * in the root directory of this software component. 16 * If no LICENSE file comes with this software, it is provided AS-IS. 17 * 18 ****************************************************************************** 19 */ 20 21 /* Define to prevent recursive inclusion -------------------------------------*/ 22 #ifndef STM32G0xx_HAL_CONF_H 23 #define STM32G0xx_HAL_CONF_H 24 25 #ifdef __cplusplus 26 extern "C" { 27 #endif 28 29 /* Exported types ------------------------------------------------------------*/ 30 /* Exported constants --------------------------------------------------------*/ 31 32 /* ########################## Module Selection ############################## */ 33 /** 34 * @brief This is the list of modules to be used in the HAL driver 35 */ 36 #define HAL_MODULE_ENABLED 37 #define HAL_ADC_MODULE_ENABLED 38 #define HAL_CEC_MODULE_ENABLED 39 #define HAL_COMP_MODULE_ENABLED 40 #define HAL_CORTEX_MODULE_ENABLED 41 #define HAL_CRC_MODULE_ENABLED 42 #define HAL_CRYP_MODULE_ENABLED 43 #define HAL_DAC_MODULE_ENABLED 44 #define HAL_DMA_MODULE_ENABLED 45 #define HAL_EXTI_MODULE_ENABLED 46 #define HAL_FLASH_MODULE_ENABLED 47 #define HAL_FDCAN_MODULE_ENABLED 48 #define HAL_GPIO_MODULE_ENABLED 49 #define HAL_I2C_MODULE_ENABLED 50 #define HAL_I2S_MODULE_ENABLED 51 #define HAL_IRDA_MODULE_ENABLED 52 #define HAL_IWDG_MODULE_ENABLED 53 #define HAL_LPTIM_MODULE_ENABLED 54 #define HAL_HCD_MODULE_ENABLED 55 #define HAL_PCD_MODULE_ENABLED 56 #define HAL_PWR_MODULE_ENABLED 57 #define HAL_RCC_MODULE_ENABLED 58 #define HAL_RNG_MODULE_ENABLED 59 #define HAL_RTC_MODULE_ENABLED 60 #define HAL_SMARTCARD_MODULE_ENABLED 61 #define HAL_SMBUS_MODULE_ENABLED 62 #define HAL_SPI_MODULE_ENABLED 63 #define HAL_TIM_MODULE_ENABLED 64 #define HAL_UART_MODULE_ENABLED 65 #define HAL_USART_MODULE_ENABLED 66 #define HAL_WWDG_MODULE_ENABLED 67 68 /* ########################## Register Callbacks selection ############################## */ 69 /** 70 * @brief This is the list of modules where register callback can be used 71 */ 72 #define USE_HAL_ADC_REGISTER_CALLBACKS 0u 73 #define USE_HAL_CEC_REGISTER_CALLBACKS 0u 74 #define USE_HAL_COMP_REGISTER_CALLBACKS 0u 75 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0u 76 #define USE_HAL_DAC_REGISTER_CALLBACKS 0u 77 #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u 78 #define USE_HAL_I2C_REGISTER_CALLBACKS 0u 79 #define USE_HAL_I2S_REGISTER_CALLBACKS 0u 80 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0u 81 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u 82 #define USE_HAL_HCD_REGISTER_CALLBACKS 0u 83 #define USE_HAL_PCD_REGISTER_CALLBACKS 0u 84 #define USE_HAL_RNG_REGISTER_CALLBACKS 0u 85 #define USE_HAL_RTC_REGISTER_CALLBACKS 0u 86 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u 87 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u 88 #define USE_HAL_SPI_REGISTER_CALLBACKS 0u 89 #define USE_HAL_TIM_REGISTER_CALLBACKS 0u 90 #define USE_HAL_UART_REGISTER_CALLBACKS 0u 91 #define USE_HAL_USART_REGISTER_CALLBACKS 0u 92 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u 93 94 /* ########################## Oscillator Values adaptation ####################*/ 95 /** 96 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 97 * This value is used by the RCC HAL module to compute the system frequency 98 * (when HSE is used as system clock source, directly or through the PLL). 99 */ 100 #if !defined (HSE_VALUE) 101 #define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ 102 #endif /* HSE_VALUE */ 103 104 #if !defined (HSE_STARTUP_TIMEOUT) 105 #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ 106 #endif /* HSE_STARTUP_TIMEOUT */ 107 108 /** 109 * @brief Internal High Speed oscillator (HSI) value. 110 * This value is used by the RCC HAL module to compute the system frequency 111 * (when HSI is used as system clock source, directly or through the PLL). 112 */ 113 #if !defined (HSI_VALUE) 114 #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ 115 #endif /* HSI_VALUE */ 116 117 #if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) 118 /** 119 * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. 120 * This internal oscillator is mainly dedicated to provide a high precision clock to 121 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 122 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 123 * which is subject to manufacturing process variations. 124 */ 125 #if !defined (HSI48_VALUE) 126 #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. 127 The real value my vary depending on manufacturing process variations.*/ 128 #endif /* HSI48_VALUE */ 129 #endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ 130 131 /** 132 * @brief Internal Low Speed oscillator (LSI) value. 133 */ 134 #if !defined (LSI_VALUE) 135 #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ 136 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 137 The real value may vary depending on the variations 138 in voltage and temperature.*/ 139 /** 140 * @brief External Low Speed oscillator (LSE) value. 141 * This value is used by the UART, RTC HAL module to compute the system frequency 142 */ 143 #if !defined (LSE_VALUE) 144 #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ 145 #endif /* LSE_VALUE */ 146 147 #if !defined (LSE_STARTUP_TIMEOUT) 148 #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ 149 #endif /* LSE_STARTUP_TIMEOUT */ 150 151 /** 152 * @brief External clock source for I2S1 peripheral 153 * This value is used by the RCC HAL module to compute the I2S1 clock source 154 * frequency. 155 */ 156 #if !defined (EXTERNAL_I2S1_CLOCK_VALUE) 157 #define EXTERNAL_I2S1_CLOCK_VALUE (48000UL) /*!< Value of the I2S1 External clock source in Hz*/ 158 #endif /* EXTERNAL_I2S1_CLOCK_VALUE */ 159 160 #if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) 161 /** 162 * @brief External clock source for I2S2 peripheral 163 * This value is used by the RCC HAL module to compute the I2S2 clock source 164 * frequency. 165 */ 166 #if !defined (EXTERNAL_I2S2_CLOCK_VALUE) 167 #define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/ 168 #endif /* EXTERNAL_I2S2_CLOCK_VALUE */ 169 #endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ 170 171 /* Tip: To avoid modifying this file each time you need to use different HSE, 172 === you can define the HSE value in your toolchain compiler preprocessor. */ 173 174 /* ########################### System Configuration ######################### */ 175 /** 176 * @brief This is the HAL system configuration section 177 */ 178 #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ 179 #define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority */ 180 #define USE_RTOS 0U 181 #define PREFETCH_ENABLE 1U 182 #define INSTRUCTION_CACHE_ENABLE 1U 183 184 /* ################## SPI peripheral configuration ########################## */ 185 186 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 187 * Activated: CRC code is present inside driver 188 * Deactivated: CRC code cleaned from driver 189 */ 190 191 #define USE_SPI_CRC 1U 192 193 /* ################## CRYP peripheral configuration ########################## */ 194 195 #define USE_HAL_CRYP_SUSPEND_RESUME 1U 196 197 198 /* ########################## Assert Selection ############################## */ 199 /** 200 * @brief Uncomment the line below to expanse the "assert_param" macro in the 201 * HAL drivers code 202 */ 203 /* #define USE_FULL_ASSERT 1U */ 204 205 /* Includes ------------------------------------------------------------------*/ 206 /** 207 * @brief Include modules header file 208 */ 209 210 #ifdef HAL_RCC_MODULE_ENABLED 211 #include "stm32g0xx_hal_rcc.h" 212 #endif /* HAL_RCC_MODULE_ENABLED */ 213 214 #ifdef HAL_GPIO_MODULE_ENABLED 215 #include "stm32g0xx_hal_gpio.h" 216 #endif /* HAL_GPIO_MODULE_ENABLED */ 217 218 #ifdef HAL_DMA_MODULE_ENABLED 219 #include "stm32g0xx_hal_dma.h" 220 #endif /* HAL_DMA_MODULE_ENABLED */ 221 222 #ifdef HAL_CORTEX_MODULE_ENABLED 223 #include "stm32g0xx_hal_cortex.h" 224 #endif /* HAL_CORTEX_MODULE_ENABLED */ 225 226 #ifdef HAL_ADC_MODULE_ENABLED 227 #include "stm32g0xx_hal_adc.h" 228 #include "stm32g0xx_hal_adc_ex.h" 229 #endif /* HAL_ADC_MODULE_ENABLED */ 230 231 #ifdef HAL_CEC_MODULE_ENABLED 232 #include "stm32g0xx_hal_cec.h" 233 #endif /* HAL_CEC_MODULE_ENABLED */ 234 235 #ifdef HAL_COMP_MODULE_ENABLED 236 #include "stm32g0xx_hal_comp.h" 237 #endif /* HAL_COMP_MODULE_ENABLED */ 238 239 #ifdef HAL_CRC_MODULE_ENABLED 240 #include "stm32g0xx_hal_crc.h" 241 #endif /* HAL_CRC_MODULE_ENABLED */ 242 243 #ifdef HAL_CRYP_MODULE_ENABLED 244 #include "stm32g0xx_hal_cryp.h" 245 #endif /* HAL_CRYP_MODULE_ENABLED */ 246 247 #ifdef HAL_DAC_MODULE_ENABLED 248 #include "stm32g0xx_hal_dac.h" 249 #endif /* HAL_DAC_MODULE_ENABLED */ 250 251 #ifdef HAL_EXTI_MODULE_ENABLED 252 #include "stm32g0xx_hal_exti.h" 253 #endif /* HAL_EXTI_MODULE_ENABLED */ 254 255 #ifdef HAL_FDCAN_MODULE_ENABLED 256 #include "stm32g0xx_hal_fdcan.h" 257 #endif /* HAL_FDCAN_MODULE_ENABLED */ 258 259 #ifdef HAL_FLASH_MODULE_ENABLED 260 #include "stm32g0xx_hal_flash.h" 261 #endif /* HAL_FLASH_MODULE_ENABLED */ 262 263 #ifdef HAL_I2C_MODULE_ENABLED 264 #include "stm32g0xx_hal_i2c.h" 265 #endif /* HAL_I2C_MODULE_ENABLED */ 266 267 #ifdef HAL_I2S_MODULE_ENABLED 268 #include "stm32g0xx_hal_i2s.h" 269 #endif /* HAL_I2S_MODULE_ENABLED */ 270 271 #ifdef HAL_IRDA_MODULE_ENABLED 272 #include "stm32g0xx_hal_irda.h" 273 #endif /* HAL_IRDA_MODULE_ENABLED */ 274 275 #ifdef HAL_IWDG_MODULE_ENABLED 276 #include "stm32g0xx_hal_iwdg.h" 277 #endif /* HAL_IWDG_MODULE_ENABLED */ 278 279 #ifdef HAL_LPTIM_MODULE_ENABLED 280 #include "stm32g0xx_hal_lptim.h" 281 #endif /* HAL_LPTIM_MODULE_ENABLED */ 282 283 #ifdef HAL_PCD_MODULE_ENABLED 284 #include "stm32g0xx_hal_pcd.h" 285 #endif /* HAL_PCD_MODULE_ENABLED */ 286 287 #ifdef HAL_HCD_MODULE_ENABLED 288 #include "stm32g0xx_hal_hcd.h" 289 #endif /* HAL_HCD_MODULE_ENABLED */ 290 291 #ifdef HAL_PWR_MODULE_ENABLED 292 #include "stm32g0xx_hal_pwr.h" 293 #endif /* HAL_PWR_MODULE_ENABLED */ 294 295 #ifdef HAL_RNG_MODULE_ENABLED 296 #include "stm32g0xx_hal_rng.h" 297 #endif /* HAL_RNG_MODULE_ENABLED */ 298 299 #ifdef HAL_RTC_MODULE_ENABLED 300 #include "stm32g0xx_hal_rtc.h" 301 #endif /* HAL_RTC_MODULE_ENABLED */ 302 303 #ifdef HAL_SMARTCARD_MODULE_ENABLED 304 #include "stm32g0xx_hal_smartcard.h" 305 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 306 307 #ifdef HAL_SMBUS_MODULE_ENABLED 308 #include "stm32g0xx_hal_smbus.h" 309 #endif /* HAL_SMBUS_MODULE_ENABLED */ 310 311 #ifdef HAL_SPI_MODULE_ENABLED 312 #include "stm32g0xx_hal_spi.h" 313 #endif /* HAL_SPI_MODULE_ENABLED */ 314 315 #ifdef HAL_TIM_MODULE_ENABLED 316 #include "stm32g0xx_hal_tim.h" 317 #endif /* HAL_TIM_MODULE_ENABLED */ 318 319 #ifdef HAL_UART_MODULE_ENABLED 320 #include "stm32g0xx_hal_uart.h" 321 #endif /* HAL_UART_MODULE_ENABLED */ 322 323 #ifdef HAL_USART_MODULE_ENABLED 324 #include "stm32g0xx_hal_usart.h" 325 #endif /* HAL_USART_MODULE_ENABLED */ 326 327 #ifdef HAL_WWDG_MODULE_ENABLED 328 #include "stm32g0xx_hal_wwdg.h" 329 #endif /* HAL_WWDG_MODULE_ENABLED */ 330 331 /* Exported macro ------------------------------------------------------------*/ 332 #ifdef USE_FULL_ASSERT 333 /** 334 * @brief The assert_param macro is used for functions parameters check. 335 * @param expr If expr is false, it calls assert_failed function 336 * which reports the name of the source file and the source 337 * line number of the call that failed. 338 * If expr is true, it returns no value. 339 * @retval None 340 */ 341 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 342 /* Exported functions ------------------------------------------------------- */ 343 void assert_failed(uint8_t *file, uint32_t line); 344 #else 345 #define assert_param(expr) ((void)0U) 346 #endif /* USE_FULL_ASSERT */ 347 348 #ifdef __cplusplus 349 } 350 #endif 351 352 #endif /* STM32G0xx_HAL_CONF_H */ 353 354 355
