1 /** 2 ****************************************************************************** 3 * @file stm32f1xx_hal_uart.h 4 * @author MCD Application Team 5 * @brief Header file of UART HAL module. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef __STM32F1xx_HAL_UART_H 21 #define __STM32F1xx_HAL_UART_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Includes ------------------------------------------------------------------*/ 28 #include "stm32f1xx_hal_def.h" 29 30 /** @addtogroup STM32F1xx_HAL_Driver 31 * @{ 32 */ 33 34 /** @addtogroup UART 35 * @{ 36 */ 37 38 /* Exported types ------------------------------------------------------------*/ 39 /** @defgroup UART_Exported_Types UART Exported Types 40 * @{ 41 */ 42 43 /** 44 * @brief UART Init Structure definition 45 */ 46 typedef struct 47 { 48 uint32_t BaudRate; /*!< This member configures the UART communication baud rate. 49 The baud rate is computed using the following formula: 50 - IntegerDivider = ((PCLKx) / (16 * (huart->Init.BaudRate))) 51 - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ 52 53 uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. 54 This parameter can be a value of @ref UART_Word_Length */ 55 56 uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. 57 This parameter can be a value of @ref UART_Stop_Bits */ 58 59 uint32_t Parity; /*!< Specifies the parity mode. 60 This parameter can be a value of @ref UART_Parity 61 @note When parity is enabled, the computed parity is inserted 62 at the MSB position of the transmitted data (9th bit when 63 the word length is set to 9 data bits; 8th bit when the 64 word length is set to 8 data bits). */ 65 66 uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. 67 This parameter can be a value of @ref UART_Mode */ 68 69 uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. 70 This parameter can be a value of @ref UART_Hardware_Flow_Control */ 71 72 uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). 73 This parameter can be a value of @ref UART_Over_Sampling. This feature is only available 74 on STM32F100xx family, so OverSampling parameter should always be set to 16. */ 75 } UART_InitTypeDef; 76 77 /** 78 * @brief HAL UART State structures definition 79 * @note HAL UART State value is a combination of 2 different substates: gState and RxState. 80 * - gState contains UART state information related to global Handle management 81 * and also information related to Tx operations. 82 * gState value coding follow below described bitmap : 83 * b7-b6 Error information 84 * 00 : No Error 85 * 01 : (Not Used) 86 * 10 : Timeout 87 * 11 : Error 88 * b5 Peripheral initialization status 89 * 0 : Reset (Peripheral not initialized) 90 * 1 : Init done (Peripheral initialized. HAL UART Init function already called) 91 * b4-b3 (not used) 92 * xx : Should be set to 00 93 * b2 Intrinsic process state 94 * 0 : Ready 95 * 1 : Busy (Peripheral busy with some configuration or internal operations) 96 * b1 (not used) 97 * x : Should be set to 0 98 * b0 Tx state 99 * 0 : Ready (no Tx operation ongoing) 100 * 1 : Busy (Tx operation ongoing) 101 * - RxState contains information related to Rx operations. 102 * RxState value coding follow below described bitmap : 103 * b7-b6 (not used) 104 * xx : Should be set to 00 105 * b5 Peripheral initialization status 106 * 0 : Reset (Peripheral not initialized) 107 * 1 : Init done (Peripheral initialized) 108 * b4-b2 (not used) 109 * xxx : Should be set to 000 110 * b1 Rx state 111 * 0 : Ready (no Rx operation ongoing) 112 * 1 : Busy (Rx operation ongoing) 113 * b0 (not used) 114 * x : Should be set to 0. 115 */ 116 typedef enum 117 { 118 HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized 119 Value is allowed for gState and RxState */ 120 HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use 121 Value is allowed for gState and RxState */ 122 HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing 123 Value is allowed for gState only */ 124 HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing 125 Value is allowed for gState only */ 126 HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing 127 Value is allowed for RxState only */ 128 HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing 129 Not to be used for neither gState nor RxState. 130 Value is result of combination (Or) between gState and RxState values */ 131 HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state 132 Value is allowed for gState only */ 133 HAL_UART_STATE_ERROR = 0xE0U /*!< Error 134 Value is allowed for gState only */ 135 } HAL_UART_StateTypeDef; 136 137 /** 138 * @brief HAL UART Reception type definition 139 * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. 140 * This parameter can be a value of @ref UART_Reception_Type_Values : 141 * HAL_UART_RECEPTION_STANDARD = 0x00U, 142 * HAL_UART_RECEPTION_TOIDLE = 0x01U, 143 */ 144 typedef uint32_t HAL_UART_RxTypeTypeDef; 145 146 /** 147 * @brief HAL UART Rx Event type definition 148 * @note HAL UART Rx Event type value aims to identify which type of Event has occurred 149 * leading to call of the RxEvent callback. 150 * This parameter can be a value of @ref UART_RxEvent_Type_Values : 151 * HAL_UART_RXEVENT_TC = 0x00U, 152 * HAL_UART_RXEVENT_HT = 0x01U, 153 * HAL_UART_RXEVENT_IDLE = 0x02U, 154 */ 155 typedef uint32_t HAL_UART_RxEventTypeTypeDef; 156 157 /** 158 * @brief UART handle Structure definition 159 */ 160 typedef struct __UART_HandleTypeDef 161 { 162 USART_TypeDef *Instance; /*!< UART registers base address */ 163 164 UART_InitTypeDef Init; /*!< UART communication parameters */ 165 166 const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ 167 168 uint16_t TxXferSize; /*!< UART Tx Transfer size */ 169 170 __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ 171 172 uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ 173 174 uint16_t RxXferSize; /*!< UART Rx Transfer size */ 175 176 __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ 177 178 __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ 179 180 __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ 181 182 DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ 183 184 DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ 185 186 HAL_LockTypeDef Lock; /*!< Locking object */ 187 188 __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management 189 and also related to Tx operations. 190 This parameter can be a value of @ref HAL_UART_StateTypeDef */ 191 192 __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. 193 This parameter can be a value of @ref HAL_UART_StateTypeDef */ 194 195 __IO uint32_t ErrorCode; /*!< UART Error code */ 196 197 #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) 198 void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ 199 void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ 200 void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ 201 void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ 202 void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ 203 void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ 204 void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ 205 void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ 206 void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ 207 void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ 208 209 void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ 210 void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ 211 #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ 212 213 } UART_HandleTypeDef; 214 215 #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) 216 /** 217 * @brief HAL UART Callback ID enumeration definition 218 */ 219 typedef enum 220 { 221 HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ 222 HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ 223 HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ 224 HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ 225 HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ 226 HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ 227 HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ 228 HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ 229 HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ 230 231 HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ 232 HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ 233 234 } HAL_UART_CallbackIDTypeDef; 235 236 /** 237 * @brief HAL UART Callback pointer definition 238 */ 239 typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ 240 typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ 241 242 #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ 243 244 /** 245 * @} 246 */ 247 248 /* Exported constants --------------------------------------------------------*/ 249 /** @defgroup UART_Exported_Constants UART Exported Constants 250 * @{ 251 */ 252 253 /** @defgroup UART_Error_Code UART Error Code 254 * @{ 255 */ 256 #define HAL_UART_ERROR_NONE 0x00000000U /*!< No error */ 257 #define HAL_UART_ERROR_PE 0x00000001U /*!< Parity error */ 258 #define HAL_UART_ERROR_NE 0x00000002U /*!< Noise error */ 259 #define HAL_UART_ERROR_FE 0x00000004U /*!< Frame error */ 260 #define HAL_UART_ERROR_ORE 0x00000008U /*!< Overrun error */ 261 #define HAL_UART_ERROR_DMA 0x00000010U /*!< DMA transfer error */ 262 #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) 263 #define HAL_UART_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */ 264 #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ 265 /** 266 * @} 267 */ 268 269 /** @defgroup UART_Word_Length UART Word Length 270 * @{ 271 */ 272 #define UART_WORDLENGTH_8B 0x00000000U 273 #define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) 274 /** 275 * @} 276 */ 277 278 /** @defgroup UART_Stop_Bits UART Number of Stop Bits 279 * @{ 280 */ 281 #define UART_STOPBITS_1 0x00000000U 282 #define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) 283 /** 284 * @} 285 */ 286 287 /** @defgroup UART_Parity UART Parity 288 * @{ 289 */ 290 #define UART_PARITY_NONE 0x00000000U 291 #define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) 292 #define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) 293 /** 294 * @} 295 */ 296 297 /** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control 298 * @{ 299 */ 300 #define UART_HWCONTROL_NONE 0x00000000U 301 #define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) 302 #define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) 303 #define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) 304 /** 305 * @} 306 */ 307 308 /** @defgroup UART_Mode UART Transfer Mode 309 * @{ 310 */ 311 #define UART_MODE_RX ((uint32_t)USART_CR1_RE) 312 #define UART_MODE_TX ((uint32_t)USART_CR1_TE) 313 #define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE | USART_CR1_RE)) 314 /** 315 * @} 316 */ 317 318 /** @defgroup UART_State UART State 319 * @{ 320 */ 321 #define UART_STATE_DISABLE 0x00000000U 322 #define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) 323 /** 324 * @} 325 */ 326 327 /** @defgroup UART_Over_Sampling UART Over Sampling 328 * @{ 329 */ 330 #define UART_OVERSAMPLING_16 0x00000000U 331 #if defined(USART_CR1_OVER8) 332 #define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) 333 #endif /* USART_CR1_OVER8 */ 334 /** 335 * @} 336 */ 337 338 /** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length 339 * @{ 340 */ 341 #define UART_LINBREAKDETECTLENGTH_10B 0x00000000U 342 #define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) 343 /** 344 * @} 345 */ 346 347 /** @defgroup UART_WakeUp_functions UART Wakeup Functions 348 * @{ 349 */ 350 #define UART_WAKEUPMETHOD_IDLELINE 0x00000000U 351 #define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE) 352 /** 353 * @} 354 */ 355 356 /** @defgroup UART_Flags UART FLags 357 * Elements values convention: 0xXXXX 358 * - 0xXXXX : Flag mask in the SR register 359 * @{ 360 */ 361 #define UART_FLAG_CTS ((uint32_t)USART_SR_CTS) 362 #define UART_FLAG_LBD ((uint32_t)USART_SR_LBD) 363 #define UART_FLAG_TXE ((uint32_t)USART_SR_TXE) 364 #define UART_FLAG_TC ((uint32_t)USART_SR_TC) 365 #define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE) 366 #define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE) 367 #define UART_FLAG_ORE ((uint32_t)USART_SR_ORE) 368 #define UART_FLAG_NE ((uint32_t)USART_SR_NE) 369 #define UART_FLAG_FE ((uint32_t)USART_SR_FE) 370 #define UART_FLAG_PE ((uint32_t)USART_SR_PE) 371 /** 372 * @} 373 */ 374 375 /** @defgroup UART_Interrupt_definition UART Interrupt Definitions 376 * Elements values convention: 0xY000XXXX 377 * - XXXX : Interrupt mask (16 bits) in the Y register 378 * - Y : Interrupt source register (2bits) 379 * - 0001: CR1 register 380 * - 0010: CR2 register 381 * - 0011: CR3 register 382 * @{ 383 */ 384 385 #define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE)) 386 #define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE)) 387 #define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE)) 388 #define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE)) 389 #define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE)) 390 391 #define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE)) 392 393 #define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE)) 394 #define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE)) 395 /** 396 * @} 397 */ 398 399 /** @defgroup UART_Reception_Type_Values UART Reception type values 400 * @{ 401 */ 402 #define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ 403 #define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ 404 /** 405 * @} 406 */ 407 408 /** @defgroup UART_RxEvent_Type_Values UART RxEvent type values 409 * @{ 410 */ 411 #define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ 412 #define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ 413 #define HAL_UART_RXEVENT_IDLE (0x00000002U) 414 /** 415 * @} 416 */ 417 418 /** 419 * @} 420 */ 421 422 /* Exported macro ------------------------------------------------------------*/ 423 /** @defgroup UART_Exported_Macros UART Exported Macros 424 * @{ 425 */ 426 427 /** @brief Reset UART handle gstate & RxState 428 * @param __HANDLE__ specifies the UART Handle. 429 * UART Handle selects the USARTx or UARTy peripheral 430 * (USART,UART availability and x,y values depending on device). 431 * @retval None 432 */ 433 #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) 434 #define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ 435 (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ 436 (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ 437 (__HANDLE__)->MspInitCallback = NULL; \ 438 (__HANDLE__)->MspDeInitCallback = NULL; \ 439 } while(0U) 440 #else 441 #define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ 442 (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ 443 (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ 444 } while(0U) 445 #endif /*USE_HAL_UART_REGISTER_CALLBACKS */ 446 447 /** @brief Flushes the UART DR register 448 * @param __HANDLE__ specifies the UART Handle. 449 * UART Handle selects the USARTx or UARTy peripheral 450 * (USART,UART availability and x,y values depending on device). 451 */ 452 #define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) 453 454 /** @brief Checks whether the specified UART flag is set or not. 455 * @param __HANDLE__ specifies the UART Handle. 456 * UART Handle selects the USARTx or UARTy peripheral 457 * (USART,UART availability and x,y values depending on device). 458 * @param __FLAG__ specifies the flag to check. 459 * This parameter can be one of the following values: 460 * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) 461 * @arg UART_FLAG_LBD: LIN Break detection flag 462 * @arg UART_FLAG_TXE: Transmit data register empty flag 463 * @arg UART_FLAG_TC: Transmission Complete flag 464 * @arg UART_FLAG_RXNE: Receive data register not empty flag 465 * @arg UART_FLAG_IDLE: Idle Line detection flag 466 * @arg UART_FLAG_ORE: Overrun Error flag 467 * @arg UART_FLAG_NE: Noise Error flag 468 * @arg UART_FLAG_FE: Framing Error flag 469 * @arg UART_FLAG_PE: Parity Error flag 470 * @retval The new state of __FLAG__ (TRUE or FALSE). 471 */ 472 #define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) 473 474 /** @brief Clears the specified UART pending flag. 475 * @param __HANDLE__ specifies the UART Handle. 476 * UART Handle selects the USARTx or UARTy peripheral 477 * (USART,UART availability and x,y values depending on device). 478 * @param __FLAG__ specifies the flag to check. 479 * This parameter can be any combination of the following values: 480 * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). 481 * @arg UART_FLAG_LBD: LIN Break detection flag. 482 * @arg UART_FLAG_TC: Transmission Complete flag. 483 * @arg UART_FLAG_RXNE: Receive data register not empty flag. 484 * 485 * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun 486 * error) and IDLE (Idle line detected) flags are cleared by software 487 * sequence: a read operation to USART_SR register followed by a read 488 * operation to USART_DR register. 489 * @note RXNE flag can be also cleared by a read to the USART_DR register. 490 * @note TC flag can be also cleared by software sequence: a read operation to 491 * USART_SR register followed by a write operation to USART_DR register. 492 * @note TXE flag is cleared only by a write to the USART_DR register. 493 * 494 * @retval None 495 */ 496 #define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) 497 498 /** @brief Clears the UART PE pending flag. 499 * @param __HANDLE__ specifies the UART Handle. 500 * UART Handle selects the USARTx or UARTy peripheral 501 * (USART,UART availability and x,y values depending on device). 502 * @retval None 503 */ 504 #define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \ 505 do{ \ 506 __IO uint32_t tmpreg = 0x00U; \ 507 tmpreg = (__HANDLE__)->Instance->SR; \ 508 tmpreg = (__HANDLE__)->Instance->DR; \ 509 UNUSED(tmpreg); \ 510 } while(0U) 511 512 /** @brief Clears the UART FE pending flag. 513 * @param __HANDLE__ specifies the UART Handle. 514 * UART Handle selects the USARTx or UARTy peripheral 515 * (USART,UART availability and x,y values depending on device). 516 * @retval None 517 */ 518 #define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) 519 520 /** @brief Clears the UART NE pending flag. 521 * @param __HANDLE__ specifies the UART Handle. 522 * UART Handle selects the USARTx or UARTy peripheral 523 * (USART,UART availability and x,y values depending on device). 524 * @retval None 525 */ 526 #define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) 527 528 /** @brief Clears the UART ORE pending flag. 529 * @param __HANDLE__ specifies the UART Handle. 530 * UART Handle selects the USARTx or UARTy peripheral 531 * (USART,UART availability and x,y values depending on device). 532 * @retval None 533 */ 534 #define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) 535 536 /** @brief Clears the UART IDLE pending flag. 537 * @param __HANDLE__ specifies the UART Handle. 538 * UART Handle selects the USARTx or UARTy peripheral 539 * (USART,UART availability and x,y values depending on device). 540 * @retval None 541 */ 542 #define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) 543 544 /** @brief Enable the specified UART interrupt. 545 * @param __HANDLE__ specifies the UART Handle. 546 * UART Handle selects the USARTx or UARTy peripheral 547 * (USART,UART availability and x,y values depending on device). 548 * @param __INTERRUPT__ specifies the UART interrupt source to enable. 549 * This parameter can be one of the following values: 550 * @arg UART_IT_CTS: CTS change interrupt 551 * @arg UART_IT_LBD: LIN Break detection interrupt 552 * @arg UART_IT_TXE: Transmit Data Register empty interrupt 553 * @arg UART_IT_TC: Transmission complete interrupt 554 * @arg UART_IT_RXNE: Receive Data register not empty interrupt 555 * @arg UART_IT_IDLE: Idle line detection interrupt 556 * @arg UART_IT_PE: Parity Error interrupt 557 * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) 558 * @retval None 559 */ 560 #define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \ 561 (((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \ 562 ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK))) 563 564 /** @brief Disable the specified UART interrupt. 565 * @param __HANDLE__ specifies the UART Handle. 566 * UART Handle selects the USARTx or UARTy peripheral 567 * (USART,UART availability and x,y values depending on device). 568 * @param __INTERRUPT__ specifies the UART interrupt source to disable. 569 * This parameter can be one of the following values: 570 * @arg UART_IT_CTS: CTS change interrupt 571 * @arg UART_IT_LBD: LIN Break detection interrupt 572 * @arg UART_IT_TXE: Transmit Data Register empty interrupt 573 * @arg UART_IT_TC: Transmission complete interrupt 574 * @arg UART_IT_RXNE: Receive Data register not empty interrupt 575 * @arg UART_IT_IDLE: Idle line detection interrupt 576 * @arg UART_IT_PE: Parity Error interrupt 577 * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) 578 * @retval None 579 */ 580 #define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ 581 (((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ 582 ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK))) 583 584 /** @brief Checks whether the specified UART interrupt source is enabled or not. 585 * @param __HANDLE__ specifies the UART Handle. 586 * UART Handle selects the USARTx or UARTy peripheral 587 * (USART,UART availability and x,y values depending on device). 588 * @param __IT__ specifies the UART interrupt source to check. 589 * This parameter can be one of the following values: 590 * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) 591 * @arg UART_IT_LBD: LIN Break detection interrupt 592 * @arg UART_IT_TXE: Transmit Data Register empty interrupt 593 * @arg UART_IT_TC: Transmission complete interrupt 594 * @arg UART_IT_RXNE: Receive Data register not empty interrupt 595 * @arg UART_IT_IDLE: Idle line detection interrupt 596 * @arg UART_IT_ERR: Error interrupt 597 * @retval The new state of __IT__ (TRUE or FALSE). 598 */ 599 #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == UART_CR2_REG_INDEX)? \ 600 (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) 601 602 /** @brief Enable CTS flow control 603 * @note This macro allows to enable CTS hardware flow control for a given UART instance, 604 * without need to call HAL_UART_Init() function. 605 * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. 606 * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need 607 * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : 608 * - UART instance should have already been initialised (through call of HAL_UART_Init() ) 609 * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) 610 * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). 611 * @param __HANDLE__ specifies the UART Handle. 612 * The Handle Instance can be any USARTx (supporting the HW Flow control feature). 613 * It is used to select the USART peripheral (USART availability and x value depending on device). 614 * @retval None 615 */ 616 #define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ 617 do{ \ 618 ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ 619 (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ 620 } while(0U) 621 622 /** @brief Disable CTS flow control 623 * @note This macro allows to disable CTS hardware flow control for a given UART instance, 624 * without need to call HAL_UART_Init() function. 625 * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. 626 * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need 627 * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : 628 * - UART instance should have already been initialised (through call of HAL_UART_Init() ) 629 * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) 630 * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). 631 * @param __HANDLE__ specifies the UART Handle. 632 * The Handle Instance can be any USARTx (supporting the HW Flow control feature). 633 * It is used to select the USART peripheral (USART availability and x value depending on device). 634 * @retval None 635 */ 636 #define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ 637 do{ \ 638 ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ 639 (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ 640 } while(0U) 641 642 /** @brief Enable RTS flow control 643 * This macro allows to enable RTS hardware flow control for a given UART instance, 644 * without need to call HAL_UART_Init() function. 645 * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. 646 * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need 647 * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : 648 * - UART instance should have already been initialised (through call of HAL_UART_Init() ) 649 * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) 650 * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). 651 * @param __HANDLE__ specifies the UART Handle. 652 * The Handle Instance can be any USARTx (supporting the HW Flow control feature). 653 * It is used to select the USART peripheral (USART availability and x value depending on device). 654 * @retval None 655 */ 656 #define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ 657 do{ \ 658 ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ 659 (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ 660 } while(0U) 661 662 /** @brief Disable RTS flow control 663 * This macro allows to disable RTS hardware flow control for a given UART instance, 664 * without need to call HAL_UART_Init() function. 665 * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. 666 * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need 667 * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : 668 * - UART instance should have already been initialised (through call of HAL_UART_Init() ) 669 * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) 670 * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). 671 * @param __HANDLE__ specifies the UART Handle. 672 * The Handle Instance can be any USARTx (supporting the HW Flow control feature). 673 * It is used to select the USART peripheral (USART availability and x value depending on device). 674 * @retval None 675 */ 676 #define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ 677 do{ \ 678 ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ 679 (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ 680 } while(0U) 681 #if defined(USART_CR3_ONEBIT) 682 683 /** @brief Macro to enable the UART's one bit sample method 684 * @param __HANDLE__ specifies the UART Handle. 685 * @retval None 686 */ 687 #define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) 688 689 /** @brief Macro to disable the UART's one bit sample method 690 * @param __HANDLE__ specifies the UART Handle. 691 * @retval None 692 */ 693 #define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ 694 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) 695 #endif /* UART_ONE_BIT_SAMPLE_Feature */ 696 697 /** @brief Enable UART 698 * @param __HANDLE__ specifies the UART Handle. 699 * @retval None 700 */ 701 #define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) 702 703 /** @brief Disable UART 704 * @param __HANDLE__ specifies the UART Handle. 705 * @retval None 706 */ 707 #define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) 708 /** 709 * @} 710 */ 711 712 /* Exported functions --------------------------------------------------------*/ 713 /** @addtogroup UART_Exported_Functions 714 * @{ 715 */ 716 717 /** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions 718 * @{ 719 */ 720 721 /* Initialization/de-initialization functions **********************************/ 722 HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); 723 HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); 724 HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); 725 HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); 726 HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); 727 void HAL_UART_MspInit(UART_HandleTypeDef *huart); 728 void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); 729 730 /* Callbacks Register/UnRegister functions ***********************************/ 731 #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) 732 HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, 733 pUART_CallbackTypeDef pCallback); 734 HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); 735 736 HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); 737 HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); 738 #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ 739 740 /** 741 * @} 742 */ 743 744 /** @addtogroup UART_Exported_Functions_Group2 IO operation functions 745 * @{ 746 */ 747 748 /* IO operation functions *******************************************************/ 749 HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); 750 HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); 751 HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); 752 HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 753 HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); 754 HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 755 HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); 756 HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); 757 HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); 758 759 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, 760 uint32_t Timeout); 761 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 762 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 763 764 HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart); 765 766 /* Transfer Abort functions */ 767 HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); 768 HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); 769 HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); 770 HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); 771 HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); 772 HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); 773 774 void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); 775 void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); 776 void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); 777 void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); 778 void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); 779 void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); 780 void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); 781 void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); 782 void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); 783 784 void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); 785 786 /** 787 * @} 788 */ 789 790 /** @addtogroup UART_Exported_Functions_Group3 791 * @{ 792 */ 793 /* Peripheral Control functions ************************************************/ 794 HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); 795 HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); 796 HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart); 797 HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); 798 HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); 799 /** 800 * @} 801 */ 802 803 /** @addtogroup UART_Exported_Functions_Group4 804 * @{ 805 */ 806 /* Peripheral State functions **************************************************/ 807 HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); 808 uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); 809 /** 810 * @} 811 */ 812 813 /** 814 * @} 815 */ 816 /* Private types -------------------------------------------------------------*/ 817 /* Private variables ---------------------------------------------------------*/ 818 /* Private constants ---------------------------------------------------------*/ 819 /** @defgroup UART_Private_Constants UART Private Constants 820 * @{ 821 */ 822 /** @brief UART interruptions flag mask 823 * 824 */ 825 #define UART_IT_MASK 0x0000FFFFU 826 827 #define UART_CR1_REG_INDEX 1U 828 #define UART_CR2_REG_INDEX 2U 829 #define UART_CR3_REG_INDEX 3U 830 /** 831 * @} 832 */ 833 834 /* Private macros ------------------------------------------------------------*/ 835 /** @defgroup UART_Private_Macros UART Private Macros 836 * @{ 837 */ 838 #define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ 839 ((LENGTH) == UART_WORDLENGTH_9B)) 840 #define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B)) 841 #define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ 842 ((STOPBITS) == UART_STOPBITS_2)) 843 #define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ 844 ((PARITY) == UART_PARITY_EVEN) || \ 845 ((PARITY) == UART_PARITY_ODD)) 846 #define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ 847 (((CONTROL) == UART_HWCONTROL_NONE) || \ 848 ((CONTROL) == UART_HWCONTROL_RTS) || \ 849 ((CONTROL) == UART_HWCONTROL_CTS) || \ 850 ((CONTROL) == UART_HWCONTROL_RTS_CTS)) 851 #define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U)) 852 #define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ 853 ((STATE) == UART_STATE_ENABLE)) 854 #if defined(USART_CR1_OVER8) 855 #define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ 856 ((SAMPLING) == UART_OVERSAMPLING_8)) 857 #endif /* USART_CR1_OVER8 */ 858 #define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16)) 859 #define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ 860 ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) 861 #define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ 862 ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) 863 #define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 4500000U) 864 #define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU) 865 866 #define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_))) 867 #define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U) 868 #define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U)\ 869 + 50U) / 100U) 870 /* UART BRR = mantissa + overflow + fraction 871 = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */ 872 #define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \ 873 (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \ 874 (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU)) 875 876 #define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_))) 877 #define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U) 878 #define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U)\ 879 + 50U) / 100U) 880 /* UART BRR = mantissa + overflow + fraction 881 = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */ 882 #define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \ 883 ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \ 884 (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U)) 885 886 /** 887 * @} 888 */ 889 890 /* Private functions ---------------------------------------------------------*/ 891 /** @defgroup UART_Private_Functions UART Private Functions 892 * @{ 893 */ 894 895 HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 896 HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 897 898 /** 899 * @} 900 */ 901 902 /** 903 * @} 904 */ 905 906 /** 907 * @} 908 */ 909 910 #ifdef __cplusplus 911 } 912 #endif 913 914 #endif /* __STM32F1xx_HAL_UART_H */ 915 916
