1 /**
2 ******************************************************************************
3 * @file stm32c0xx_ll_i2c.c
4 * @author MCD Application Team
5 * @brief I2C LL module driver.
6 ******************************************************************************
7 * @attention
8 *
9 * Copyright (c) 2022 STMicroelectronics.
10 * All rights reserved.
11 *
12 * This software is licensed under terms that can be found in the LICENSE file
13 * in the root directory of this software component.
14 * If no LICENSE file comes with this software, it is provided AS-IS.
15 *
16 ******************************************************************************
17 */
18 #if defined(USE_FULL_LL_DRIVER)
19
20 /* Includes ------------------------------------------------------------------*/
21 #include "stm32c0xx_ll_i2c.h"
22 #include "stm32c0xx_ll_bus.h"
23 #ifdef USE_FULL_ASSERT
24 #include "stm32_assert.h"
25 #else
26 #define assert_param(expr) ((void)0U)
27 #endif /* USE_FULL_ASSERT */
28
29 /** @addtogroup STM32C0xx_LL_Driver
30 * @{
31 */
32
33 #if defined (I2C1)
34
35 /** @defgroup I2C_LL I2C
36 * @{
37 */
38
39 /* Private types -------------------------------------------------------------*/
40 /* Private variables ---------------------------------------------------------*/
41 /* Private constants ---------------------------------------------------------*/
42 /* Private macros ------------------------------------------------------------*/
43 /** @addtogroup I2C_LL_Private_Macros
44 * @{
45 */
46
47 #define IS_LL_I2C_PERIPHERAL_MODE(__VALUE__) (((__VALUE__) == LL_I2C_MODE_I2C) || \
48 ((__VALUE__) == LL_I2C_MODE_SMBUS_HOST) || \
49 ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE) || \
50 ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE_ARP))
51
52 #define IS_LL_I2C_ANALOG_FILTER(__VALUE__) (((__VALUE__) == LL_I2C_ANALOGFILTER_ENABLE) || \
53 ((__VALUE__) == LL_I2C_ANALOGFILTER_DISABLE))
54
55 #define IS_LL_I2C_DIGITAL_FILTER(__VALUE__) ((__VALUE__) <= 0x0000000FU)
56
57 #define IS_LL_I2C_OWN_ADDRESS1(__VALUE__) ((__VALUE__) <= 0x000003FFU)
58
59 #define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__) (((__VALUE__) == LL_I2C_ACK) || \
60 ((__VALUE__) == LL_I2C_NACK))
61
62 #define IS_LL_I2C_OWN_ADDRSIZE(__VALUE__) (((__VALUE__) == LL_I2C_OWNADDRESS1_7BIT) || \
63 ((__VALUE__) == LL_I2C_OWNADDRESS1_10BIT))
64 /**
65 * @}
66 */
67
68 /* Private function prototypes -----------------------------------------------*/
69
70 /* Exported functions --------------------------------------------------------*/
71 /** @addtogroup I2C_LL_Exported_Functions
72 * @{
73 */
74
75 /** @addtogroup I2C_LL_EF_Init
76 * @{
77 */
78
79 /**
80 * @brief De-initialize the I2C registers to their default reset values.
81 * @param I2Cx I2C Instance.
82 * @retval An ErrorStatus enumeration value:
83 * - SUCCESS: I2C registers are de-initialized
84 * - ERROR: I2C registers are not de-initialized
85 */
LL_I2C_DeInit(const I2C_TypeDef * I2Cx)86 ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx)
87 {
88 ErrorStatus status = SUCCESS;
89
90 /* Check the I2C Instance I2Cx */
91 assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
92
93 if (I2Cx == I2C1)
94 {
95 /* Force reset of I2C clock */
96 LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1);
97
98 /* Release reset of I2C clock */
99 LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1);
100 }
101 else
102 {
103 status = ERROR;
104 }
105
106 return status;
107 }
108
109 /**
110 * @brief Initialize the I2C registers according to the specified parameters in I2C_InitStruct.
111 * @param I2Cx I2C Instance.
112 * @param I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure.
113 * @retval An ErrorStatus enumeration value:
114 * - SUCCESS: I2C registers are initialized
115 * - ERROR: Not applicable
116 */
LL_I2C_Init(I2C_TypeDef * I2Cx,const LL_I2C_InitTypeDef * I2C_InitStruct)117 ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct)
118 {
119 /* Check the I2C Instance I2Cx */
120 assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
121
122 /* Check the I2C parameters from I2C_InitStruct */
123 assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode));
124 assert_param(IS_LL_I2C_ANALOG_FILTER(I2C_InitStruct->AnalogFilter));
125 assert_param(IS_LL_I2C_DIGITAL_FILTER(I2C_InitStruct->DigitalFilter));
126 assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1));
127 assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge));
128 assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize));
129
130 /* Disable the selected I2Cx Peripheral */
131 LL_I2C_Disable(I2Cx);
132
133 /*---------------------------- I2Cx CR1 Configuration ------------------------
134 * Configure the analog and digital noise filters with parameters :
135 * - AnalogFilter: I2C_CR1_ANFOFF bit
136 * - DigitalFilter: I2C_CR1_DNF[3:0] bits
137 */
138 LL_I2C_ConfigFilters(I2Cx, I2C_InitStruct->AnalogFilter, I2C_InitStruct->DigitalFilter);
139
140 /*---------------------------- I2Cx TIMINGR Configuration --------------------
141 * Configure the SDA setup, hold time and the SCL high, low period with parameter :
142 * - Timing: I2C_TIMINGR_PRESC[3:0], I2C_TIMINGR_SCLDEL[3:0], I2C_TIMINGR_SDADEL[3:0],
143 * I2C_TIMINGR_SCLH[7:0] and I2C_TIMINGR_SCLL[7:0] bits
144 */
145 LL_I2C_SetTiming(I2Cx, I2C_InitStruct->Timing);
146
147 /* Enable the selected I2Cx Peripheral */
148 LL_I2C_Enable(I2Cx);
149
150 /*---------------------------- I2Cx OAR1 Configuration -----------------------
151 * Disable, Configure and Enable I2Cx device own address 1 with parameters :
152 * - OwnAddress1: I2C_OAR1_OA1[9:0] bits
153 * - OwnAddrSize: I2C_OAR1_OA1MODE bit
154 */
155 LL_I2C_DisableOwnAddress1(I2Cx);
156 LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize);
157
158 /* OwnAdress1 == 0 is reserved for General Call address */
159 if (I2C_InitStruct->OwnAddress1 != 0U)
160 {
161 LL_I2C_EnableOwnAddress1(I2Cx);
162 }
163
164 /*---------------------------- I2Cx MODE Configuration -----------------------
165 * Configure I2Cx peripheral mode with parameter :
166 * - PeripheralMode: I2C_CR1_SMBDEN and I2C_CR1_SMBHEN bits
167 */
168 LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode);
169
170 /*---------------------------- I2Cx CR2 Configuration ------------------------
171 * Configure the ACKnowledge or Non ACKnowledge condition
172 * after the address receive match code or next received byte with parameter :
173 * - TypeAcknowledge: I2C_CR2_NACK bit
174 */
175 LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge);
176
177 return SUCCESS;
178 }
179
180 /**
181 * @brief Set each @ref LL_I2C_InitTypeDef field to default value.
182 * @param I2C_InitStruct Pointer to a @ref LL_I2C_InitTypeDef structure.
183 * @retval None
184 */
LL_I2C_StructInit(LL_I2C_InitTypeDef * I2C_InitStruct)185 void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct)
186 {
187 /* Set I2C_InitStruct fields to default values */
188 I2C_InitStruct->PeripheralMode = LL_I2C_MODE_I2C;
189 I2C_InitStruct->Timing = 0U;
190 I2C_InitStruct->AnalogFilter = LL_I2C_ANALOGFILTER_ENABLE;
191 I2C_InitStruct->DigitalFilter = 0U;
192 I2C_InitStruct->OwnAddress1 = 0U;
193 I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK;
194 I2C_InitStruct->OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT;
195 }
196
197 /**
198 * @}
199 */
200
201 /**
202 * @}
203 */
204
205 /**
206 * @}
207 */
208
209 #endif /* I2C1 */
210
211 /**
212 * @}
213 */
214
215 #endif /* USE_FULL_LL_DRIVER */
216
