1 /* 2 * Copyright (c) 2020, The OpenThread Authors. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. Neither the name of the copyright holder nor the 13 * names of its contributors may be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 17 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 20 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26 * POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 /** 30 * @file 31 * This file includes compile-time configuration constants for OpenThread. 32 */ 33 34 #ifndef OPENTHREAD_SPINEL_CONFIG_H_ 35 #define OPENTHREAD_SPINEL_CONFIG_H_ 36 37 /** 38 * Include project specific lib config file if defined. 39 */ 40 #ifdef OPENTHREAD_PROJECT_LIB_CONFIG_FILE 41 #include OPENTHREAD_PROJECT_LIB_CONFIG_FILE 42 #endif 43 44 /** 45 * @def OPENTHREAD_LIB_SPINEL_RX_FRAME_BUFFER_SIZE 46 * 47 * Specifies the rx frame buffer size used by `SpinelInterface` in RCP host (posix) code. This is applicable/used when 48 * `RadioSpinel` platform is used. 49 */ 50 #ifndef OPENTHREAD_LIB_SPINEL_RX_FRAME_BUFFER_SIZE 51 #define OPENTHREAD_LIB_SPINEL_RX_FRAME_BUFFER_SIZE 8192 52 #endif 53 54 /** 55 * @def OPENTHREAD_LIB_SPINEL_LOG_MAX_SIZE 56 * 57 * The maximum log string size (number of chars). 58 */ 59 #ifndef OPENTHREAD_LIB_SPINEL_LOG_MAX_SIZE 60 #define OPENTHREAD_LIB_SPINEL_LOG_MAX_SIZE 1024 61 #endif 62 63 /** 64 * @def OPENTHREAD_LIB_SPINEL_NCP_LOG_MAX_SIZE 65 * 66 * The maximum OpenThread log string size (number of chars) supported by NCP using Spinel `StreamWrite`. 67 */ 68 #ifndef OPENTHREAD_LIB_SPINEL_NCP_LOG_MAX_SIZE 69 #define OPENTHREAD_LIB_SPINEL_NCP_LOG_MAX_SIZE 150 70 #endif 71 72 /** 73 * @def OPENTHREAD_SPINEL_CONFIG_OPENTHREAD_MESSAGE_ENABLE 74 * 75 * Define 1 to enable feeding an OpenThread message to encoder/decoder. 76 */ 77 #ifndef OPENTHREAD_SPINEL_CONFIG_OPENTHREAD_MESSAGE_ENABLE 78 #define OPENTHREAD_SPINEL_CONFIG_OPENTHREAD_MESSAGE_ENABLE 0 79 #endif 80 81 /** 82 * @def OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT 83 * 84 * Defines the max count of RCP failures allowed to be recovered. 85 * 0 means to disable RCP failure recovering. 86 */ 87 #ifndef OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT 88 #define OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT 0 89 #endif 90 91 /** 92 * @def OPENTHREAD_SPINEL_CONFIG_MAX_SRC_MATCH_ENTRIES 93 * 94 * Defines size of the local source match table used by RadioSpinel 95 * when OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT is used. 96 */ 97 #ifndef OPENTHREAD_SPINEL_CONFIG_MAX_SRC_MATCH_ENTRIES 98 #define OPENTHREAD_SPINEL_CONFIG_MAX_SRC_MATCH_ENTRIES OPENTHREAD_CONFIG_MLE_MAX_CHILDREN 99 #endif 100 101 /** 102 * @def OPENTHREAD_SPINEL_CONFIG_ABORT_ON_UNEXPECTED_RCP_RESET_ENABLE 103 * 104 * Define 1 to abort the host when receiving unexpected reset from RCP. 105 */ 106 #ifndef OPENTHREAD_SPINEL_CONFIG_ABORT_ON_UNEXPECTED_RCP_RESET_ENABLE 107 #define OPENTHREAD_SPINEL_CONFIG_ABORT_ON_UNEXPECTED_RCP_RESET_ENABLE 0 108 #endif 109 110 /** 111 * @def OPENTHREAD_SPINEL_CONFIG_RCP_TIME_SYNC_INTERVAL 112 * 113 * This setting configures the interval (in units of microseconds) for host-rcp 114 * time sync. The host will recalculate the time offset between host and RCP 115 * every interval. 116 */ 117 #ifndef OPENTHREAD_SPINEL_CONFIG_RCP_TIME_SYNC_INTERVAL 118 #define OPENTHREAD_SPINEL_CONFIG_RCP_TIME_SYNC_INTERVAL (60 * 1000 * 1000) 119 #endif 120 121 /** 122 * @def OPENTHREAD_SPINEL_CONFIG_BROADCAST_IID 123 * 124 * Define broadcast IID for spinel frames dedicated to all hosts in multipan configuration. 125 */ 126 #ifndef OPENTHREAD_SPINEL_CONFIG_BROADCAST_IID 127 #define OPENTHREAD_SPINEL_CONFIG_BROADCAST_IID SPINEL_HEADER_IID_3 128 #endif 129 130 /** 131 * @def OPENTHREAD_SPINEL_CONFIG_VENDOR_HOOK_ENABLE 132 * 133 * Enables compilation of vendor specific code for Spinel 134 */ 135 #ifndef OPENTHREAD_SPINEL_CONFIG_VENDOR_HOOK_ENABLE 136 #define OPENTHREAD_SPINEL_CONFIG_VENDOR_HOOK_ENABLE 0 137 #endif 138 139 /** 140 * @def OPENTHREAD_SPINEL_CONFIG_COMPATIBILITY_ERROR_CALLBACK_ENABLE 141 * 142 * Enables compatibility error callback in Spinel 143 */ 144 #ifndef OPENTHREAD_SPINEL_CONFIG_COMPATIBILITY_ERROR_CALLBACK_ENABLE 145 #define OPENTHREAD_SPINEL_CONFIG_COMPATIBILITY_ERROR_CALLBACK_ENABLE 0 146 #endif 147 148 /** 149 * @def OPENTHREAD_SPINEL_CONFIG_VENDOR_HOOK_HEADER 150 * 151 * Header file defining class VendorRadioSpinel 152 */ 153 #ifndef OPENTHREAD_SPINEL_CONFIG_VENDOR_HOOK_HEADER 154 #define OPENTHREAD_SPINEL_CONFIG_VENDOR_HOOK_HEADER "lib/spinel/example_vendor_hook.hpp" 155 #endif 156 157 /** 158 * @def OPENTHREAD_SPINEL_CONFIG_RCP_TX_WAIT_TIME_SECS 159 * 160 * Defines the Tx wait duration in seconds. 161 */ 162 #ifndef OPENTHREAD_SPINEL_CONFIG_RCP_TX_WAIT_TIME_SECS 163 #define OPENTHREAD_SPINEL_CONFIG_RCP_TX_WAIT_TIME_SECS 5 164 #endif 165 166 #endif // OPENTHREAD_SPINEL_CONFIG_H_ 167
