1 /* 2 * Copyright (c) 2022, The OpenThread Authors. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. Neither the name of the copyright holder nor the 13 * names of its contributors may be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 17 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 20 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26 * POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 /** 30 * @file 31 * This file includes definitions for the NAT64 translator. 32 * 33 */ 34 35 #ifndef NAT64_TRANSLATOR_HPP_ 36 #define NAT64_TRANSLATOR_HPP_ 37 38 #include "openthread-core-config.h" 39 40 #include "common/array.hpp" 41 #include "common/linked_list.hpp" 42 #include "common/locator.hpp" 43 #include "common/pool.hpp" 44 #include "common/timer.hpp" 45 #include "net/ip4_types.hpp" 46 #include "net/ip6.hpp" 47 48 namespace ot { 49 namespace Nat64 { 50 51 enum State : uint8_t 52 { 53 kStateDisabled = OT_NAT64_STATE_DISABLED, ///< The component is disabled. 54 kStateNotRunning = OT_NAT64_STATE_NOT_RUNNING, ///< The component is enabled, but is not running. 55 kStateIdle = OT_NAT64_STATE_IDLE, ///< NAT64 is enabled, but this BR is not an active NAT64 BR. 56 kStateActive = OT_NAT64_STATE_ACTIVE, ///< The component is running. 57 }; 58 59 /** 60 * Converts a `State` into a string. 61 * 62 * @param[in] aState A state. 63 * 64 * @returns A string representation of @p aState. 65 * 66 */ 67 const char *StateToString(State aState); 68 69 #if OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE 70 71 /** 72 * Implements the NAT64 translator. 73 * 74 */ 75 class Translator : public InstanceLocator, private NonCopyable 76 { 77 public: 78 static constexpr uint32_t kAddressMappingIdleTimeoutMsec = 79 OPENTHREAD_CONFIG_NAT64_IDLE_TIMEOUT_SECONDS * Time::kOneSecondInMsec; 80 static constexpr uint32_t kAddressMappingPoolSize = OPENTHREAD_CONFIG_NAT64_MAX_MAPPINGS; 81 82 typedef otNat64AddressMappingIterator AddressMappingIterator; ///< Address mapping Iterator. 83 84 /** 85 * The possible results of NAT64 translation. 86 * 87 */ 88 enum Result : uint8_t 89 { 90 kNotTranslated, ///< The message is not translated, it might be sending to an non-nat64 prefix (for outgoing 91 ///< datagrams), or it is already an IPv6 message (for incoming datagrams). 92 kForward, ///< Message is successfully translated, the caller should continue forwarding the translated 93 ///< datagram. 94 kDrop, ///< The caller should drop the datagram silently. 95 }; 96 97 /** 98 * Represents the counters for the protocols supported by NAT64. 99 * 100 */ 101 class ProtocolCounters : public otNat64ProtocolCounters, public Clearable<ProtocolCounters> 102 { 103 public: 104 /** 105 * Adds the packet to the counter for the given IPv6 protocol. 106 * 107 * @param[in] aProtocol The protocol of the packet. 108 * @param[in] aPacketSize The size of the packet. 109 * 110 */ 111 void Count6To4Packet(uint8_t aProtocol, uint64_t aPacketSize); 112 113 /** 114 * Adds the packet to the counter for the given IPv4 protocol. 115 * 116 * @param[in] aProtocol The protocol of the packet. 117 * @param[in] aPacketSize The size of the packet. 118 * 119 */ 120 void Count4To6Packet(uint8_t aProtocol, uint64_t aPacketSize); 121 }; 122 123 /** 124 * Represents the counters of dropped packets due to errors when handling NAT64 packets. 125 * 126 */ 127 class ErrorCounters : public otNat64ErrorCounters, public Clearable<otNat64ErrorCounters> 128 { 129 public: 130 enum Reason : uint8_t 131 { 132 kUnknown = OT_NAT64_DROP_REASON_UNKNOWN, 133 kIllegalPacket = OT_NAT64_DROP_REASON_ILLEGAL_PACKET, 134 kUnsupportedProto = OT_NAT64_DROP_REASON_UNSUPPORTED_PROTO, 135 kNoMapping = OT_NAT64_DROP_REASON_NO_MAPPING, 136 }; 137 138 /** 139 * Adds the counter for the given reason when translating an IPv4 datagram. 140 * 141 * @param[in] aReason The reason of packet drop. 142 * 143 */ Count4To6(Reason aReason)144 void Count4To6(Reason aReason) { mCount4To6[aReason]++; } 145 146 /** 147 * Adds the counter for the given reason when translating an IPv6 datagram. 148 * 149 * @param[in] aReason The reason of packet drop. 150 * 151 */ Count6To4(Reason aReason)152 void Count6To4(Reason aReason) { mCount6To4[aReason]++; } 153 }; 154 155 /** 156 * Initializes the NAT64 translator. 157 * 158 */ 159 explicit Translator(Instance &aInstance); 160 161 /** 162 * Set the state of NAT64 translator. 163 * 164 * Note: Disabling the translator will invalidate all address mappings. 165 * 166 * @param[in] aEnabled A boolean to enable/disable NAT64 translator. 167 * 168 */ 169 void SetEnabled(bool aEnabled); 170 171 /** 172 * Gets the state of NAT64 translator. 173 * 174 * @retval kNat64StateDisabled The translator is disabled. 175 * @retval kNat64StateIdle The translator is not configured with a valid NAT64 prefix and a CIDR. 176 * @retval kNat64StateActive The translator is translating packets. 177 * 178 */ GetState(void) const179 State GetState(void) const { return mState; } 180 181 /** 182 * Translates an IPv4 datagram to an IPv6 datagram and sends it via Thread interface. 183 * 184 * The caller transfers ownership of @p aMessage when making this call. OpenThread will free @p aMessage when 185 * processing is complete, including when a value other than `kErrorNone` is returned. 186 * 187 * @param[in] aMessage A reference to the message. 188 * 189 * @retval kErrorNone Successfully processed the message. 190 * @retval kErrorDrop Message was well-formed but not fully processed due to datagram processing rules. 191 * @retval kErrorNoBufs Could not allocate necessary message buffers when processing the datagram. 192 * @retval kErrorNoRoute No route to host. 193 * @retval kErrorParse Encountered a malformed header when processing the message. 194 * 195 */ 196 Error SendMessage(Message &aMessage); 197 198 /** 199 * Allocate a new message buffer for sending an IPv4 message (which will be translated into an IPv6 datagram by 200 * NAT64 later). Message buffers allocated by this function will have 20 bytes (The differences between the size of 201 * IPv6 headers and the size of IPv4 headers) reserved. 202 * 203 * @param[in] aSettings The message settings. 204 * 205 * @returns A pointer to the message buffer or NULL if no message buffers are available or parameters are invalid. 206 * 207 */ 208 Message *NewIp4Message(const Message::Settings &aSettings); 209 210 /** 211 * Translates an IPv4 datagram to IPv6 datagram. Note the datagram and datagramLength might be adjusted. 212 * Note the message can have 20 bytes reserved before the message to avoid potential copy operations. If the message 213 * is already an IPv6 datagram, `Result::kNotTranslated` will be returned and @p aMessage won't be modified. 214 * 215 * @param[in,out] aMessage the message to be processed. 216 * 217 * @retval kNotTranslated The message is already an IPv6 datagram. @p aMessage is not updated. 218 * @retval kForward The caller should continue forwarding the datagram. 219 * @retval kDrop The caller should drop the datagram silently. 220 * 221 */ 222 Result TranslateToIp6(Message &message); 223 224 /** 225 * Translates an IPv6 datagram to IPv4 datagram. Note the datagram and datagramLength might be adjusted. 226 * If the message is not targeted to NAT64-mapped address, `Result::kNotTranslated` will be returned and @p aMessage 227 * won't be modified. 228 * 229 * @param[in,out] aMessage the message to be processed. 230 * 231 * @retval kNotTranslated The datagram is not sending to the configured NAT64 prefix. 232 * @retval kForward The caller should continue forwarding the datagram. 233 * @retval kDrop The caller should drop the datagram silently. 234 * 235 */ 236 Result TranslateFromIp6(Message &aMessage); 237 238 /** 239 * Sets the CIDR used when setting the source address of the outgoing translated IPv4 datagrams. A valid CIDR must 240 * have a non-zero prefix length. 241 * 242 * @note The actual addresses pool is limited by the size of the mapping pool and the number of addresses available 243 * in the CIDR block. If the provided is a valid IPv4 CIDR for NAT64, and it is different from the one already 244 * configured, the NAT64 translator will be reset and all existing sessions will be expired. 245 * 246 * @param[in] aCidr the CIDR for the sources of the translated datagrams. 247 * 248 * @retval kErrorInvalidArgs The the given CIDR a valid CIDR for NAT64. 249 * @retval kErrorNone Successfully enabled/disabled the NAT64 translator. 250 * 251 */ 252 Error SetIp4Cidr(const Ip4::Cidr &aCidr); 253 254 /** 255 * Sets the prefix of NAT64-mapped addresses in the thread network. The address mapping table will not be cleared. 256 * Equals to `ClearNat64Prefix` when an empty prefix is provided. 257 * 258 * @param[in] aNat64Prefix The prefix of the NAT64-mapped addresses. 259 * 260 */ 261 void SetNat64Prefix(const Ip6::Prefix &aNat64Prefix); 262 263 /** 264 * Clear the prefix of NAT64-mapped addresses in the thread network. The address mapping table will not be cleared. 265 * The translator will return kNotTranslated for all IPv6 datagrams and kDrop for all IPv4 datagrams. 266 * 267 */ 268 void ClearNat64Prefix(void); 269 270 /** 271 * Initializes an `otNat64AddressMappingIterator`. 272 * 273 * An iterator MUST be initialized before it is used. 274 * 275 * An iterator can be initialized again to restart from the beginning of the mapping info. 276 * 277 * @param[out] aIterator An iterator to initialize. 278 * 279 */ 280 void InitAddressMappingIterator(AddressMappingIterator &aIterator); 281 282 /** 283 * Gets the next AddressMapping info (using an iterator). 284 * 285 * @param[in,out] aIterator The iterator. On success the iterator will be updated to point to next NAT64 286 * address mapping record. To get the first entry the iterator should be set to 287 * OT_NAT64_ADDRESS_MAPPING_ITERATOR_INIT. 288 * @param[out] aMapping An `otNat64AddressMapping` where information of next NAT64 address mapping record 289 * is placed (on success). 290 * 291 * @retval kErrorNone Successfully found the next NAT64 address mapping info (@p aMapping was successfully 292 * updated). 293 * @retval kErrorNotFound No subsequent NAT64 address mapping info was found. 294 * 295 */ 296 Error GetNextAddressMapping(AddressMappingIterator &aIterator, otNat64AddressMapping &aMapping); 297 298 /** 299 * Gets the NAT64 translator counters. 300 * 301 * The counters are initialized to zero when the OpenThread instance is initialized. 302 * 303 * @param[out] aCounters A `ProtocolCounters` where the counters of NAT64 translator will be placed. 304 * 305 */ GetCounters(ProtocolCounters & aCounters) const306 void GetCounters(ProtocolCounters &aCounters) const { aCounters = mCounters; } 307 308 /** 309 * Gets the NAT64 translator error counters. 310 * 311 * The counters are initialized to zero when the OpenThread instance is initialized. 312 * 313 * @param[out] aCounters An `ErrorCounters` where the counters of NAT64 translator will be placed. 314 * 315 */ GetErrorCounters(ErrorCounters & aCounters) const316 void GetErrorCounters(ErrorCounters &aCounters) const { aCounters = mErrorCounters; } 317 318 /** 319 * Gets the configured CIDR in the NAT64 translator. 320 * 321 * @param[out] aCidr The `Ip4::Cidr` Where the configured CIDR will be placed. 322 * 323 * @retval kErrorNone @p aCidr is set to the configured CIDR. 324 * @retval kErrorNotFound The translator is not configured with an IPv4 CIDR. 325 * 326 */ 327 Error GetIp4Cidr(Ip4::Cidr &aCidr); 328 329 /** 330 * Gets the configured IPv6 prefix in the NAT64 translator. 331 * 332 * @param[out] aPrefix The `Ip6::Prefix` where the configured NAT64 prefix will be placed. 333 * 334 * @retval kErrorNone @p aPrefix is set to the configured prefix. 335 * @retval kErrorNotFound The translator is not configured with an IPv6 prefix. 336 * 337 */ 338 Error GetIp6Prefix(Ip6::Prefix &aPrefix); 339 340 private: 341 class AddressMapping : public LinkedListEntry<AddressMapping> 342 { 343 public: 344 friend class LinkedListEntry<AddressMapping>; 345 friend class LinkedList<AddressMapping>; 346 347 typedef String<Ip6::Address::kInfoStringSize + Ip4::Address::kAddressStringSize + 4> InfoString; 348 Touch(TimeMilli aNow)349 void Touch(TimeMilli aNow) { mExpiry = aNow + kAddressMappingIdleTimeoutMsec; } 350 InfoString ToString(void) const; 351 void CopyTo(otNat64AddressMapping &aMapping, TimeMilli aNow) const; 352 353 uint64_t mId; // The unique id for a mapping session. 354 355 Ip4::Address mIp4; 356 Ip6::Address mIp6; 357 TimeMilli mExpiry; // The timestamp when this mapping expires, in milliseconds. 358 359 ProtocolCounters mCounters; 360 361 private: Matches(const Ip4::Address & aIp4) const362 bool Matches(const Ip4::Address &aIp4) const { return mIp4 == aIp4; } Matches(const Ip6::Address & aIp6) const363 bool Matches(const Ip6::Address &aIp6) const { return mIp6 == aIp6; } Matches(const TimeMilli aNow) const364 bool Matches(const TimeMilli aNow) const { return mExpiry < aNow; } 365 366 AddressMapping *mNext; 367 }; 368 369 Error TranslateIcmp4(Message &aMessage); 370 Error TranslateIcmp6(Message &aMessage); 371 372 uint16_t ReleaseMappings(LinkedList<AddressMapping> &aMappings); 373 void ReleaseMapping(AddressMapping &aMapping); 374 uint16_t ReleaseExpiredMappings(void); 375 AddressMapping *AllocateMapping(const Ip6::Address &aIp6Addr); 376 AddressMapping *FindOrAllocateMapping(const Ip6::Address &aIp6Addr); 377 AddressMapping *FindMapping(const Ip4::Address &aIp4Addr); 378 379 void HandleMappingExpirerTimer(void); 380 381 using MappingTimer = TimerMilliIn<Translator, &Translator::HandleMappingExpirerTimer>; 382 383 void UpdateState(bool aAlwaysNotify = false); 384 385 bool mEnabled; 386 State mState; 387 388 uint64_t mNextMappingId; 389 390 Array<Ip4::Address, kAddressMappingPoolSize> mIp4AddressPool; 391 Pool<AddressMapping, kAddressMappingPoolSize> mAddressMappingPool; 392 LinkedList<AddressMapping> mActiveAddressMappings; 393 394 Ip6::Prefix mNat64Prefix; 395 Ip4::Cidr mIp4Cidr; 396 397 MappingTimer mMappingExpirerTimer; 398 399 ProtocolCounters mCounters; 400 ErrorCounters mErrorCounters; 401 }; 402 #endif // OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE 403 404 } // namespace Nat64 405 406 DefineMapEnum(otNat64State, Nat64::State); 407 #if OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE 408 DefineCoreType(otNat64ProtocolCounters, Nat64::Translator::ProtocolCounters); 409 DefineCoreType(otNat64ErrorCounters, Nat64::Translator::ErrorCounters); 410 #endif 411 412 } // namespace ot 413 414 #endif // NAT64_TRANSLATOR_HPP_ 415
