1 /**
2 ******************************************************************************
3 * @file stm32l4xx_hal_tim.c
4 * @author MCD Application Team
5 * @brief TIM HAL module driver.
6 * This file provides firmware functions to manage the following
7 * functionalities of the Timer (TIM) peripheral:
8 * + TIM Time Base Initialization
9 * + TIM Time Base Start
10 * + TIM Time Base Start Interruption
11 * + TIM Time Base Start DMA
12 * + TIM Output Compare/PWM Initialization
13 * + TIM Output Compare/PWM Channel Configuration
14 * + TIM Output Compare/PWM Start
15 * + TIM Output Compare/PWM Start Interruption
16 * + TIM Output Compare/PWM Start DMA
17 * + TIM Input Capture Initialization
18 * + TIM Input Capture Channel Configuration
19 * + TIM Input Capture Start
20 * + TIM Input Capture Start Interruption
21 * + TIM Input Capture Start DMA
22 * + TIM One Pulse Initialization
23 * + TIM One Pulse Channel Configuration
24 * + TIM One Pulse Start
25 * + TIM Encoder Interface Initialization
26 * + TIM Encoder Interface Start
27 * + TIM Encoder Interface Start Interruption
28 * + TIM Encoder Interface Start DMA
29 * + Commutation Event configuration with Interruption and DMA
30 * + TIM OCRef clear configuration
31 * + TIM External Clock configuration
32 ******************************************************************************
33 * @attention
34 *
35 * Copyright (c) 2017 STMicroelectronics.
36 * All rights reserved.
37 *
38 * This software is licensed under terms that can be found in the LICENSE file
39 * in the root directory of this software component.
40 * If no LICENSE file comes with this software, it is provided AS-IS.
41 *
42 ******************************************************************************
43 @verbatim
44 ==============================================================================
45 ##### TIMER Generic features #####
46 ==============================================================================
47 [..] The Timer features include:
48 (#) 16-bit up, down, up/down auto-reload counter.
49 (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
50 counter clock frequency either by any factor between 1 and 65536.
51 (#) Up to 4 independent channels for:
52 (++) Input Capture
53 (++) Output Compare
54 (++) PWM generation (Edge and Center-aligned Mode)
55 (++) One-pulse mode output
56 (#) Synchronization circuit to control the timer with external signals and to interconnect
57 several timers together.
58 (#) Supports incremental encoder for positioning purposes
59
60 ##### How to use this driver #####
61 ==============================================================================
62 [..]
63 (#) Initialize the TIM low level resources by implementing the following functions
64 depending on the selected feature:
65 (++) Time Base : HAL_TIM_Base_MspInit()
66 (++) Input Capture : HAL_TIM_IC_MspInit()
67 (++) Output Compare : HAL_TIM_OC_MspInit()
68 (++) PWM generation : HAL_TIM_PWM_MspInit()
69 (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
70 (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
71
72 (#) Initialize the TIM low level resources :
73 (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
74 (##) TIM pins configuration
75 (+++) Enable the clock for the TIM GPIOs using the following function:
76 __HAL_RCC_GPIOx_CLK_ENABLE();
77 (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
78
79 (#) The external Clock can be configured, if needed (the default clock is the
80 internal clock from the APBx), using the following function:
81 HAL_TIM_ConfigClockSource, the clock configuration should be done before
82 any start function.
83
84 (#) Configure the TIM in the desired functioning mode using one of the
85 Initialization function of this driver:
86 (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
87 (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
88 Output Compare signal.
89 (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
90 PWM signal.
91 (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
92 external signal.
93 (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
94 in One Pulse Mode.
95 (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
96
97 (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
98 (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
99 (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
100 (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
101 (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
102 (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
103 (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
104
105 (#) The DMA Burst is managed with the two following functions:
106 HAL_TIM_DMABurst_WriteStart()
107 HAL_TIM_DMABurst_ReadStart()
108
109 *** Callback registration ***
110 =============================================
111
112 [..]
113 The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1
114 allows the user to configure dynamically the driver callbacks.
115
116 [..]
117 Use Function HAL_TIM_RegisterCallback() to register a callback.
118 HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle,
119 the Callback ID and a pointer to the user callback function.
120
121 [..]
122 Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default
123 weak function.
124 HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle,
125 and the Callback ID.
126
127 [..]
128 These functions allow to register/unregister following callbacks:
129 (+) Base_MspInitCallback : TIM Base Msp Init Callback.
130 (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback.
131 (+) IC_MspInitCallback : TIM IC Msp Init Callback.
132 (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback.
133 (+) OC_MspInitCallback : TIM OC Msp Init Callback.
134 (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback.
135 (+) PWM_MspInitCallback : TIM PWM Msp Init Callback.
136 (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback.
137 (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback.
138 (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback.
139 (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback.
140 (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback.
141 (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback.
142 (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback.
143 (+) PeriodElapsedCallback : TIM Period Elapsed Callback.
144 (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback.
145 (+) TriggerCallback : TIM Trigger Callback.
146 (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback.
147 (+) IC_CaptureCallback : TIM Input Capture Callback.
148 (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback.
149 (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback.
150 (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback.
151 (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback.
152 (+) ErrorCallback : TIM Error Callback.
153 (+) CommutationCallback : TIM Commutation Callback.
154 (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback.
155 (+) BreakCallback : TIM Break Callback.
156 (+) Break2Callback : TIM Break2 Callback.
157
158 [..]
159 By default, after the Init and when the state is HAL_TIM_STATE_RESET
160 all interrupt callbacks are set to the corresponding weak functions:
161 examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback().
162
163 [..]
164 Exception done for MspInit and MspDeInit functions that are reset to the legacy weak
165 functionalities in the Init / DeInit only when these callbacks are null
166 (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit
167 keep and use the user MspInit / MspDeInit callbacks(registered beforehand)
168
169 [..]
170 Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only.
171 Exception done MspInit / MspDeInit that can be registered / unregistered
172 in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state,
173 thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit.
174 In that case first register the MspInit/MspDeInit user callbacks
175 using HAL_TIM_RegisterCallback() before calling DeInit or Init function.
176
177 [..]
178 When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or
179 not defined, the callback registration feature is not available and all callbacks
180 are set to the corresponding weak functions.
181
182 @endverbatim
183 ******************************************************************************
184 */
185
186 /* Includes ------------------------------------------------------------------*/
187 #include "stm32l4xx_hal.h"
188
189 /** @addtogroup STM32L4xx_HAL_Driver
190 * @{
191 */
192
193 /** @defgroup TIM TIM
194 * @brief TIM HAL module driver
195 * @{
196 */
197
198 #ifdef HAL_TIM_MODULE_ENABLED
199
200 /* Private typedef -----------------------------------------------------------*/
201 /* Private define ------------------------------------------------------------*/
202 /* Private macros ------------------------------------------------------------*/
203 /* Private variables ---------------------------------------------------------*/
204 /* Private function prototypes -----------------------------------------------*/
205 /** @addtogroup TIM_Private_Functions
206 * @{
207 */
208 static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
209 static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
210 static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
211 static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
212 static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
213 static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
214 static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
215 uint32_t TIM_ICFilter);
216 static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
217 static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
218 uint32_t TIM_ICFilter);
219 static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
220 uint32_t TIM_ICFilter);
221 static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource);
222 static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
223 static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma);
224 static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
225 static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
226 static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma);
227 static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
228 const TIM_SlaveConfigTypeDef *sSlaveConfig);
229 /**
230 * @}
231 */
232 /* Exported functions --------------------------------------------------------*/
233
234 /** @defgroup TIM_Exported_Functions TIM Exported Functions
235 * @{
236 */
237
238 /** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions
239 * @brief Time Base functions
240 *
241 @verbatim
242 ==============================================================================
243 ##### Time Base functions #####
244 ==============================================================================
245 [..]
246 This section provides functions allowing to:
247 (+) Initialize and configure the TIM base.
248 (+) De-initialize the TIM base.
249 (+) Start the Time Base.
250 (+) Stop the Time Base.
251 (+) Start the Time Base and enable interrupt.
252 (+) Stop the Time Base and disable interrupt.
253 (+) Start the Time Base and enable DMA transfer.
254 (+) Stop the Time Base and disable DMA transfer.
255
256 @endverbatim
257 * @{
258 */
259 /**
260 * @brief Initializes the TIM Time base Unit according to the specified
261 * parameters in the TIM_HandleTypeDef and initialize the associated handle.
262 * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
263 * requires a timer reset to avoid unexpected direction
264 * due to DIR bit readonly in center aligned mode.
265 * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init()
266 * @param htim TIM Base handle
267 * @retval HAL status
268 */
HAL_TIM_Base_Init(TIM_HandleTypeDef * htim)269 HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
270 {
271 /* Check the TIM handle allocation */
272 if (htim == NULL)
273 {
274 return HAL_ERROR;
275 }
276
277 /* Check the parameters */
278 assert_param(IS_TIM_INSTANCE(htim->Instance));
279 assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
280 assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
281 assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
282 assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
283
284 if (htim->State == HAL_TIM_STATE_RESET)
285 {
286 /* Allocate lock resource and initialize it */
287 htim->Lock = HAL_UNLOCKED;
288
289 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
290 /* Reset interrupt callbacks to legacy weak callbacks */
291 TIM_ResetCallback(htim);
292
293 if (htim->Base_MspInitCallback == NULL)
294 {
295 htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
296 }
297 /* Init the low level hardware : GPIO, CLOCK, NVIC */
298 htim->Base_MspInitCallback(htim);
299 #else
300 /* Init the low level hardware : GPIO, CLOCK, NVIC */
301 HAL_TIM_Base_MspInit(htim);
302 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
303 }
304
305 /* Set the TIM state */
306 htim->State = HAL_TIM_STATE_BUSY;
307
308 /* Set the Time Base configuration */
309 TIM_Base_SetConfig(htim->Instance, &htim->Init);
310
311 /* Initialize the DMA burst operation state */
312 htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
313
314 /* Initialize the TIM channels state */
315 TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
316 TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
317
318 /* Initialize the TIM state*/
319 htim->State = HAL_TIM_STATE_READY;
320
321 return HAL_OK;
322 }
323
324 /**
325 * @brief DeInitializes the TIM Base peripheral
326 * @param htim TIM Base handle
327 * @retval HAL status
328 */
HAL_TIM_Base_DeInit(TIM_HandleTypeDef * htim)329 HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
330 {
331 /* Check the parameters */
332 assert_param(IS_TIM_INSTANCE(htim->Instance));
333
334 htim->State = HAL_TIM_STATE_BUSY;
335
336 /* Disable the TIM Peripheral Clock */
337 __HAL_TIM_DISABLE(htim);
338
339 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
340 if (htim->Base_MspDeInitCallback == NULL)
341 {
342 htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
343 }
344 /* DeInit the low level hardware */
345 htim->Base_MspDeInitCallback(htim);
346 #else
347 /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
348 HAL_TIM_Base_MspDeInit(htim);
349 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
350
351 /* Change the DMA burst operation state */
352 htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
353
354 /* Change the TIM channels state */
355 TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
356 TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
357
358 /* Change TIM state */
359 htim->State = HAL_TIM_STATE_RESET;
360
361 /* Release Lock */
362 __HAL_UNLOCK(htim);
363
364 return HAL_OK;
365 }
366
367 /**
368 * @brief Initializes the TIM Base MSP.
369 * @param htim TIM Base handle
370 * @retval None
371 */
HAL_TIM_Base_MspInit(TIM_HandleTypeDef * htim)372 __weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
373 {
374 /* Prevent unused argument(s) compilation warning */
375 UNUSED(htim);
376
377 /* NOTE : This function should not be modified, when the callback is needed,
378 the HAL_TIM_Base_MspInit could be implemented in the user file
379 */
380 }
381
382 /**
383 * @brief DeInitializes TIM Base MSP.
384 * @param htim TIM Base handle
385 * @retval None
386 */
HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef * htim)387 __weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
388 {
389 /* Prevent unused argument(s) compilation warning */
390 UNUSED(htim);
391
392 /* NOTE : This function should not be modified, when the callback is needed,
393 the HAL_TIM_Base_MspDeInit could be implemented in the user file
394 */
395 }
396
397
398 /**
399 * @brief Starts the TIM Base generation.
400 * @param htim TIM Base handle
401 * @retval HAL status
402 */
HAL_TIM_Base_Start(TIM_HandleTypeDef * htim)403 HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
404 {
405 uint32_t tmpsmcr;
406
407 /* Check the parameters */
408 assert_param(IS_TIM_INSTANCE(htim->Instance));
409
410 /* Check the TIM state */
411 if (htim->State != HAL_TIM_STATE_READY)
412 {
413 return HAL_ERROR;
414 }
415
416 /* Set the TIM state */
417 htim->State = HAL_TIM_STATE_BUSY;
418
419 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
420 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
421 {
422 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
423 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
424 {
425 __HAL_TIM_ENABLE(htim);
426 }
427 }
428 else
429 {
430 __HAL_TIM_ENABLE(htim);
431 }
432
433 /* Return function status */
434 return HAL_OK;
435 }
436
437 /**
438 * @brief Stops the TIM Base generation.
439 * @param htim TIM Base handle
440 * @retval HAL status
441 */
HAL_TIM_Base_Stop(TIM_HandleTypeDef * htim)442 HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
443 {
444 /* Check the parameters */
445 assert_param(IS_TIM_INSTANCE(htim->Instance));
446
447 /* Disable the Peripheral */
448 __HAL_TIM_DISABLE(htim);
449
450 /* Set the TIM state */
451 htim->State = HAL_TIM_STATE_READY;
452
453 /* Return function status */
454 return HAL_OK;
455 }
456
457 /**
458 * @brief Starts the TIM Base generation in interrupt mode.
459 * @param htim TIM Base handle
460 * @retval HAL status
461 */
HAL_TIM_Base_Start_IT(TIM_HandleTypeDef * htim)462 HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
463 {
464 uint32_t tmpsmcr;
465
466 /* Check the parameters */
467 assert_param(IS_TIM_INSTANCE(htim->Instance));
468
469 /* Check the TIM state */
470 if (htim->State != HAL_TIM_STATE_READY)
471 {
472 return HAL_ERROR;
473 }
474
475 /* Set the TIM state */
476 htim->State = HAL_TIM_STATE_BUSY;
477
478 /* Enable the TIM Update interrupt */
479 __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
480
481 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
482 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
483 {
484 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
485 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
486 {
487 __HAL_TIM_ENABLE(htim);
488 }
489 }
490 else
491 {
492 __HAL_TIM_ENABLE(htim);
493 }
494
495 /* Return function status */
496 return HAL_OK;
497 }
498
499 /**
500 * @brief Stops the TIM Base generation in interrupt mode.
501 * @param htim TIM Base handle
502 * @retval HAL status
503 */
HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef * htim)504 HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
505 {
506 /* Check the parameters */
507 assert_param(IS_TIM_INSTANCE(htim->Instance));
508
509 /* Disable the TIM Update interrupt */
510 __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
511
512 /* Disable the Peripheral */
513 __HAL_TIM_DISABLE(htim);
514
515 /* Set the TIM state */
516 htim->State = HAL_TIM_STATE_READY;
517
518 /* Return function status */
519 return HAL_OK;
520 }
521
522 /**
523 * @brief Starts the TIM Base generation in DMA mode.
524 * @param htim TIM Base handle
525 * @param pData The source Buffer address.
526 * @param Length The length of data to be transferred from memory to peripheral.
527 * @retval HAL status
528 */
HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef * htim,const uint32_t * pData,uint16_t Length)529 HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length)
530 {
531 uint32_t tmpsmcr;
532
533 /* Check the parameters */
534 assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
535
536 /* Set the TIM state */
537 if (htim->State == HAL_TIM_STATE_BUSY)
538 {
539 return HAL_BUSY;
540 }
541 else if (htim->State == HAL_TIM_STATE_READY)
542 {
543 if ((pData == NULL) || (Length == 0U))
544 {
545 return HAL_ERROR;
546 }
547 else
548 {
549 htim->State = HAL_TIM_STATE_BUSY;
550 }
551 }
552 else
553 {
554 return HAL_ERROR;
555 }
556
557 /* Set the DMA Period elapsed callbacks */
558 htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
559 htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt;
560
561 /* Set the DMA error callback */
562 htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
563
564 /* Enable the DMA channel */
565 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR,
566 Length) != HAL_OK)
567 {
568 /* Return error status */
569 return HAL_ERROR;
570 }
571
572 /* Enable the TIM Update DMA request */
573 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
574
575 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
576 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
577 {
578 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
579 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
580 {
581 __HAL_TIM_ENABLE(htim);
582 }
583 }
584 else
585 {
586 __HAL_TIM_ENABLE(htim);
587 }
588
589 /* Return function status */
590 return HAL_OK;
591 }
592
593 /**
594 * @brief Stops the TIM Base generation in DMA mode.
595 * @param htim TIM Base handle
596 * @retval HAL status
597 */
HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef * htim)598 HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
599 {
600 /* Check the parameters */
601 assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
602
603 /* Disable the TIM Update DMA request */
604 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
605
606 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]);
607
608 /* Disable the Peripheral */
609 __HAL_TIM_DISABLE(htim);
610
611 /* Set the TIM state */
612 htim->State = HAL_TIM_STATE_READY;
613
614 /* Return function status */
615 return HAL_OK;
616 }
617
618 /**
619 * @}
620 */
621
622 /** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions
623 * @brief TIM Output Compare functions
624 *
625 @verbatim
626 ==============================================================================
627 ##### TIM Output Compare functions #####
628 ==============================================================================
629 [..]
630 This section provides functions allowing to:
631 (+) Initialize and configure the TIM Output Compare.
632 (+) De-initialize the TIM Output Compare.
633 (+) Start the TIM Output Compare.
634 (+) Stop the TIM Output Compare.
635 (+) Start the TIM Output Compare and enable interrupt.
636 (+) Stop the TIM Output Compare and disable interrupt.
637 (+) Start the TIM Output Compare and enable DMA transfer.
638 (+) Stop the TIM Output Compare and disable DMA transfer.
639
640 @endverbatim
641 * @{
642 */
643 /**
644 * @brief Initializes the TIM Output Compare according to the specified
645 * parameters in the TIM_HandleTypeDef and initializes the associated handle.
646 * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
647 * requires a timer reset to avoid unexpected direction
648 * due to DIR bit readonly in center aligned mode.
649 * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init()
650 * @param htim TIM Output Compare handle
651 * @retval HAL status
652 */
HAL_TIM_OC_Init(TIM_HandleTypeDef * htim)653 HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim)
654 {
655 /* Check the TIM handle allocation */
656 if (htim == NULL)
657 {
658 return HAL_ERROR;
659 }
660
661 /* Check the parameters */
662 assert_param(IS_TIM_INSTANCE(htim->Instance));
663 assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
664 assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
665 assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
666 assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
667
668 if (htim->State == HAL_TIM_STATE_RESET)
669 {
670 /* Allocate lock resource and initialize it */
671 htim->Lock = HAL_UNLOCKED;
672
673 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
674 /* Reset interrupt callbacks to legacy weak callbacks */
675 TIM_ResetCallback(htim);
676
677 if (htim->OC_MspInitCallback == NULL)
678 {
679 htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
680 }
681 /* Init the low level hardware : GPIO, CLOCK, NVIC */
682 htim->OC_MspInitCallback(htim);
683 #else
684 /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
685 HAL_TIM_OC_MspInit(htim);
686 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
687 }
688
689 /* Set the TIM state */
690 htim->State = HAL_TIM_STATE_BUSY;
691
692 /* Init the base time for the Output Compare */
693 TIM_Base_SetConfig(htim->Instance, &htim->Init);
694
695 /* Initialize the DMA burst operation state */
696 htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
697
698 /* Initialize the TIM channels state */
699 TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
700 TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
701
702 /* Initialize the TIM state*/
703 htim->State = HAL_TIM_STATE_READY;
704
705 return HAL_OK;
706 }
707
708 /**
709 * @brief DeInitializes the TIM peripheral
710 * @param htim TIM Output Compare handle
711 * @retval HAL status
712 */
HAL_TIM_OC_DeInit(TIM_HandleTypeDef * htim)713 HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
714 {
715 /* Check the parameters */
716 assert_param(IS_TIM_INSTANCE(htim->Instance));
717
718 htim->State = HAL_TIM_STATE_BUSY;
719
720 /* Disable the TIM Peripheral Clock */
721 __HAL_TIM_DISABLE(htim);
722
723 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
724 if (htim->OC_MspDeInitCallback == NULL)
725 {
726 htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
727 }
728 /* DeInit the low level hardware */
729 htim->OC_MspDeInitCallback(htim);
730 #else
731 /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
732 HAL_TIM_OC_MspDeInit(htim);
733 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
734
735 /* Change the DMA burst operation state */
736 htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
737
738 /* Change the TIM channels state */
739 TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
740 TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
741
742 /* Change TIM state */
743 htim->State = HAL_TIM_STATE_RESET;
744
745 /* Release Lock */
746 __HAL_UNLOCK(htim);
747
748 return HAL_OK;
749 }
750
751 /**
752 * @brief Initializes the TIM Output Compare MSP.
753 * @param htim TIM Output Compare handle
754 * @retval None
755 */
HAL_TIM_OC_MspInit(TIM_HandleTypeDef * htim)756 __weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
757 {
758 /* Prevent unused argument(s) compilation warning */
759 UNUSED(htim);
760
761 /* NOTE : This function should not be modified, when the callback is needed,
762 the HAL_TIM_OC_MspInit could be implemented in the user file
763 */
764 }
765
766 /**
767 * @brief DeInitializes TIM Output Compare MSP.
768 * @param htim TIM Output Compare handle
769 * @retval None
770 */
HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef * htim)771 __weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
772 {
773 /* Prevent unused argument(s) compilation warning */
774 UNUSED(htim);
775
776 /* NOTE : This function should not be modified, when the callback is needed,
777 the HAL_TIM_OC_MspDeInit could be implemented in the user file
778 */
779 }
780
781 /**
782 * @brief Starts the TIM Output Compare signal generation.
783 * @param htim TIM Output Compare handle
784 * @param Channel TIM Channel to be enabled
785 * This parameter can be one of the following values:
786 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
787 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
788 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
789 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
790 * @arg TIM_CHANNEL_5: TIM Channel 5 selected
791 * @arg TIM_CHANNEL_6: TIM Channel 6 selected
792 * @retval HAL status
793 */
HAL_TIM_OC_Start(TIM_HandleTypeDef * htim,uint32_t Channel)794 HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
795 {
796 uint32_t tmpsmcr;
797
798 /* Check the parameters */
799 assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
800
801 /* Check the TIM channel state */
802 if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
803 {
804 return HAL_ERROR;
805 }
806
807 /* Set the TIM channel state */
808 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
809
810 /* Enable the Output compare channel */
811 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
812
813 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
814 {
815 /* Enable the main output */
816 __HAL_TIM_MOE_ENABLE(htim);
817 }
818
819 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
820 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
821 {
822 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
823 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
824 {
825 __HAL_TIM_ENABLE(htim);
826 }
827 }
828 else
829 {
830 __HAL_TIM_ENABLE(htim);
831 }
832
833 /* Return function status */
834 return HAL_OK;
835 }
836
837 /**
838 * @brief Stops the TIM Output Compare signal generation.
839 * @param htim TIM Output Compare handle
840 * @param Channel TIM Channel to be disabled
841 * This parameter can be one of the following values:
842 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
843 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
844 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
845 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
846 * @arg TIM_CHANNEL_5: TIM Channel 5 selected
847 * @arg TIM_CHANNEL_6: TIM Channel 6 selected
848 * @retval HAL status
849 */
HAL_TIM_OC_Stop(TIM_HandleTypeDef * htim,uint32_t Channel)850 HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
851 {
852 /* Check the parameters */
853 assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
854
855 /* Disable the Output compare channel */
856 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
857
858 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
859 {
860 /* Disable the Main Output */
861 __HAL_TIM_MOE_DISABLE(htim);
862 }
863
864 /* Disable the Peripheral */
865 __HAL_TIM_DISABLE(htim);
866
867 /* Set the TIM channel state */
868 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
869
870 /* Return function status */
871 return HAL_OK;
872 }
873
874 /**
875 * @brief Starts the TIM Output Compare signal generation in interrupt mode.
876 * @param htim TIM Output Compare handle
877 * @param Channel TIM Channel to be enabled
878 * This parameter can be one of the following values:
879 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
880 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
881 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
882 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
883 * @retval HAL status
884 */
HAL_TIM_OC_Start_IT(TIM_HandleTypeDef * htim,uint32_t Channel)885 HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
886 {
887 HAL_StatusTypeDef status = HAL_OK;
888 uint32_t tmpsmcr;
889
890 /* Check the parameters */
891 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
892
893 /* Check the TIM channel state */
894 if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
895 {
896 return HAL_ERROR;
897 }
898
899 /* Set the TIM channel state */
900 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
901
902 switch (Channel)
903 {
904 case TIM_CHANNEL_1:
905 {
906 /* Enable the TIM Capture/Compare 1 interrupt */
907 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
908 break;
909 }
910
911 case TIM_CHANNEL_2:
912 {
913 /* Enable the TIM Capture/Compare 2 interrupt */
914 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
915 break;
916 }
917
918 case TIM_CHANNEL_3:
919 {
920 /* Enable the TIM Capture/Compare 3 interrupt */
921 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
922 break;
923 }
924
925 case TIM_CHANNEL_4:
926 {
927 /* Enable the TIM Capture/Compare 4 interrupt */
928 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
929 break;
930 }
931
932 default:
933 status = HAL_ERROR;
934 break;
935 }
936
937 if (status == HAL_OK)
938 {
939 /* Enable the Output compare channel */
940 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
941
942 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
943 {
944 /* Enable the main output */
945 __HAL_TIM_MOE_ENABLE(htim);
946 }
947
948 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
949 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
950 {
951 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
952 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
953 {
954 __HAL_TIM_ENABLE(htim);
955 }
956 }
957 else
958 {
959 __HAL_TIM_ENABLE(htim);
960 }
961 }
962
963 /* Return function status */
964 return status;
965 }
966
967 /**
968 * @brief Stops the TIM Output Compare signal generation in interrupt mode.
969 * @param htim TIM Output Compare handle
970 * @param Channel TIM Channel to be disabled
971 * This parameter can be one of the following values:
972 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
973 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
974 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
975 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
976 * @retval HAL status
977 */
HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef * htim,uint32_t Channel)978 HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
979 {
980 HAL_StatusTypeDef status = HAL_OK;
981
982 /* Check the parameters */
983 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
984
985 switch (Channel)
986 {
987 case TIM_CHANNEL_1:
988 {
989 /* Disable the TIM Capture/Compare 1 interrupt */
990 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
991 break;
992 }
993
994 case TIM_CHANNEL_2:
995 {
996 /* Disable the TIM Capture/Compare 2 interrupt */
997 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
998 break;
999 }
1000
1001 case TIM_CHANNEL_3:
1002 {
1003 /* Disable the TIM Capture/Compare 3 interrupt */
1004 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
1005 break;
1006 }
1007
1008 case TIM_CHANNEL_4:
1009 {
1010 /* Disable the TIM Capture/Compare 4 interrupt */
1011 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
1012 break;
1013 }
1014
1015 default:
1016 status = HAL_ERROR;
1017 break;
1018 }
1019
1020 if (status == HAL_OK)
1021 {
1022 /* Disable the Output compare channel */
1023 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
1024
1025 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
1026 {
1027 /* Disable the Main Output */
1028 __HAL_TIM_MOE_DISABLE(htim);
1029 }
1030
1031 /* Disable the Peripheral */
1032 __HAL_TIM_DISABLE(htim);
1033
1034 /* Set the TIM channel state */
1035 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
1036 }
1037
1038 /* Return function status */
1039 return status;
1040 }
1041
1042 /**
1043 * @brief Starts the TIM Output Compare signal generation in DMA mode.
1044 * @param htim TIM Output Compare handle
1045 * @param Channel TIM Channel to be enabled
1046 * This parameter can be one of the following values:
1047 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
1048 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
1049 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
1050 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
1051 * @param pData The source Buffer address.
1052 * @param Length The length of data to be transferred from memory to TIM peripheral
1053 * @retval HAL status
1054 */
HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef * htim,uint32_t Channel,const uint32_t * pData,uint16_t Length)1055 HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
1056 uint16_t Length)
1057 {
1058 HAL_StatusTypeDef status = HAL_OK;
1059 uint32_t tmpsmcr;
1060
1061 /* Check the parameters */
1062 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
1063
1064 /* Set the TIM channel state */
1065 if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
1066 {
1067 return HAL_BUSY;
1068 }
1069 else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
1070 {
1071 if ((pData == NULL) || (Length == 0U))
1072 {
1073 return HAL_ERROR;
1074 }
1075 else
1076 {
1077 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
1078 }
1079 }
1080 else
1081 {
1082 return HAL_ERROR;
1083 }
1084
1085 switch (Channel)
1086 {
1087 case TIM_CHANNEL_1:
1088 {
1089 /* Set the DMA compare callbacks */
1090 htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
1091 htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
1092
1093 /* Set the DMA error callback */
1094 htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
1095
1096 /* Enable the DMA channel */
1097 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
1098 Length) != HAL_OK)
1099 {
1100 /* Return error status */
1101 return HAL_ERROR;
1102 }
1103
1104 /* Enable the TIM Capture/Compare 1 DMA request */
1105 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
1106 break;
1107 }
1108
1109 case TIM_CHANNEL_2:
1110 {
1111 /* Set the DMA compare callbacks */
1112 htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
1113 htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
1114
1115 /* Set the DMA error callback */
1116 htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
1117
1118 /* Enable the DMA channel */
1119 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
1120 Length) != HAL_OK)
1121 {
1122 /* Return error status */
1123 return HAL_ERROR;
1124 }
1125
1126 /* Enable the TIM Capture/Compare 2 DMA request */
1127 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
1128 break;
1129 }
1130
1131 case TIM_CHANNEL_3:
1132 {
1133 /* Set the DMA compare callbacks */
1134 htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
1135 htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
1136
1137 /* Set the DMA error callback */
1138 htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
1139
1140 /* Enable the DMA channel */
1141 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
1142 Length) != HAL_OK)
1143 {
1144 /* Return error status */
1145 return HAL_ERROR;
1146 }
1147 /* Enable the TIM Capture/Compare 3 DMA request */
1148 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
1149 break;
1150 }
1151
1152 case TIM_CHANNEL_4:
1153 {
1154 /* Set the DMA compare callbacks */
1155 htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
1156 htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
1157
1158 /* Set the DMA error callback */
1159 htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
1160
1161 /* Enable the DMA channel */
1162 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4,
1163 Length) != HAL_OK)
1164 {
1165 /* Return error status */
1166 return HAL_ERROR;
1167 }
1168 /* Enable the TIM Capture/Compare 4 DMA request */
1169 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
1170 break;
1171 }
1172
1173 default:
1174 status = HAL_ERROR;
1175 break;
1176 }
1177
1178 if (status == HAL_OK)
1179 {
1180 /* Enable the Output compare channel */
1181 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
1182
1183 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
1184 {
1185 /* Enable the main output */
1186 __HAL_TIM_MOE_ENABLE(htim);
1187 }
1188
1189 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
1190 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
1191 {
1192 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
1193 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
1194 {
1195 __HAL_TIM_ENABLE(htim);
1196 }
1197 }
1198 else
1199 {
1200 __HAL_TIM_ENABLE(htim);
1201 }
1202 }
1203
1204 /* Return function status */
1205 return status;
1206 }
1207
1208 /**
1209 * @brief Stops the TIM Output Compare signal generation in DMA mode.
1210 * @param htim TIM Output Compare handle
1211 * @param Channel TIM Channel to be disabled
1212 * This parameter can be one of the following values:
1213 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
1214 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
1215 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
1216 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
1217 * @retval HAL status
1218 */
HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef * htim,uint32_t Channel)1219 HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
1220 {
1221 HAL_StatusTypeDef status = HAL_OK;
1222
1223 /* Check the parameters */
1224 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
1225
1226 switch (Channel)
1227 {
1228 case TIM_CHANNEL_1:
1229 {
1230 /* Disable the TIM Capture/Compare 1 DMA request */
1231 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
1232 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
1233 break;
1234 }
1235
1236 case TIM_CHANNEL_2:
1237 {
1238 /* Disable the TIM Capture/Compare 2 DMA request */
1239 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
1240 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
1241 break;
1242 }
1243
1244 case TIM_CHANNEL_3:
1245 {
1246 /* Disable the TIM Capture/Compare 3 DMA request */
1247 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
1248 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
1249 break;
1250 }
1251
1252 case TIM_CHANNEL_4:
1253 {
1254 /* Disable the TIM Capture/Compare 4 interrupt */
1255 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
1256 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
1257 break;
1258 }
1259
1260 default:
1261 status = HAL_ERROR;
1262 break;
1263 }
1264
1265 if (status == HAL_OK)
1266 {
1267 /* Disable the Output compare channel */
1268 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
1269
1270 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
1271 {
1272 /* Disable the Main Output */
1273 __HAL_TIM_MOE_DISABLE(htim);
1274 }
1275
1276 /* Disable the Peripheral */
1277 __HAL_TIM_DISABLE(htim);
1278
1279 /* Set the TIM channel state */
1280 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
1281 }
1282
1283 /* Return function status */
1284 return status;
1285 }
1286
1287 /**
1288 * @}
1289 */
1290
1291 /** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions
1292 * @brief TIM PWM functions
1293 *
1294 @verbatim
1295 ==============================================================================
1296 ##### TIM PWM functions #####
1297 ==============================================================================
1298 [..]
1299 This section provides functions allowing to:
1300 (+) Initialize and configure the TIM PWM.
1301 (+) De-initialize the TIM PWM.
1302 (+) Start the TIM PWM.
1303 (+) Stop the TIM PWM.
1304 (+) Start the TIM PWM and enable interrupt.
1305 (+) Stop the TIM PWM and disable interrupt.
1306 (+) Start the TIM PWM and enable DMA transfer.
1307 (+) Stop the TIM PWM and disable DMA transfer.
1308
1309 @endverbatim
1310 * @{
1311 */
1312 /**
1313 * @brief Initializes the TIM PWM Time Base according to the specified
1314 * parameters in the TIM_HandleTypeDef and initializes the associated handle.
1315 * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
1316 * requires a timer reset to avoid unexpected direction
1317 * due to DIR bit readonly in center aligned mode.
1318 * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init()
1319 * @param htim TIM PWM handle
1320 * @retval HAL status
1321 */
HAL_TIM_PWM_Init(TIM_HandleTypeDef * htim)1322 HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
1323 {
1324 /* Check the TIM handle allocation */
1325 if (htim == NULL)
1326 {
1327 return HAL_ERROR;
1328 }
1329
1330 /* Check the parameters */
1331 assert_param(IS_TIM_INSTANCE(htim->Instance));
1332 assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
1333 assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
1334 assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
1335 assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
1336
1337 if (htim->State == HAL_TIM_STATE_RESET)
1338 {
1339 /* Allocate lock resource and initialize it */
1340 htim->Lock = HAL_UNLOCKED;
1341
1342 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
1343 /* Reset interrupt callbacks to legacy weak callbacks */
1344 TIM_ResetCallback(htim);
1345
1346 if (htim->PWM_MspInitCallback == NULL)
1347 {
1348 htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
1349 }
1350 /* Init the low level hardware : GPIO, CLOCK, NVIC */
1351 htim->PWM_MspInitCallback(htim);
1352 #else
1353 /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
1354 HAL_TIM_PWM_MspInit(htim);
1355 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
1356 }
1357
1358 /* Set the TIM state */
1359 htim->State = HAL_TIM_STATE_BUSY;
1360
1361 /* Init the base time for the PWM */
1362 TIM_Base_SetConfig(htim->Instance, &htim->Init);
1363
1364 /* Initialize the DMA burst operation state */
1365 htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
1366
1367 /* Initialize the TIM channels state */
1368 TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
1369 TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
1370
1371 /* Initialize the TIM state*/
1372 htim->State = HAL_TIM_STATE_READY;
1373
1374 return HAL_OK;
1375 }
1376
1377 /**
1378 * @brief DeInitializes the TIM peripheral
1379 * @param htim TIM PWM handle
1380 * @retval HAL status
1381 */
HAL_TIM_PWM_DeInit(TIM_HandleTypeDef * htim)1382 HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
1383 {
1384 /* Check the parameters */
1385 assert_param(IS_TIM_INSTANCE(htim->Instance));
1386
1387 htim->State = HAL_TIM_STATE_BUSY;
1388
1389 /* Disable the TIM Peripheral Clock */
1390 __HAL_TIM_DISABLE(htim);
1391
1392 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
1393 if (htim->PWM_MspDeInitCallback == NULL)
1394 {
1395 htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
1396 }
1397 /* DeInit the low level hardware */
1398 htim->PWM_MspDeInitCallback(htim);
1399 #else
1400 /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
1401 HAL_TIM_PWM_MspDeInit(htim);
1402 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
1403
1404 /* Change the DMA burst operation state */
1405 htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
1406
1407 /* Change the TIM channels state */
1408 TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
1409 TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
1410
1411 /* Change TIM state */
1412 htim->State = HAL_TIM_STATE_RESET;
1413
1414 /* Release Lock */
1415 __HAL_UNLOCK(htim);
1416
1417 return HAL_OK;
1418 }
1419
1420 /**
1421 * @brief Initializes the TIM PWM MSP.
1422 * @param htim TIM PWM handle
1423 * @retval None
1424 */
HAL_TIM_PWM_MspInit(TIM_HandleTypeDef * htim)1425 __weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
1426 {
1427 /* Prevent unused argument(s) compilation warning */
1428 UNUSED(htim);
1429
1430 /* NOTE : This function should not be modified, when the callback is needed,
1431 the HAL_TIM_PWM_MspInit could be implemented in the user file
1432 */
1433 }
1434
1435 /**
1436 * @brief DeInitializes TIM PWM MSP.
1437 * @param htim TIM PWM handle
1438 * @retval None
1439 */
HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef * htim)1440 __weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
1441 {
1442 /* Prevent unused argument(s) compilation warning */
1443 UNUSED(htim);
1444
1445 /* NOTE : This function should not be modified, when the callback is needed,
1446 the HAL_TIM_PWM_MspDeInit could be implemented in the user file
1447 */
1448 }
1449
1450 /**
1451 * @brief Starts the PWM signal generation.
1452 * @param htim TIM handle
1453 * @param Channel TIM Channels to be enabled
1454 * This parameter can be one of the following values:
1455 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
1456 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
1457 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
1458 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
1459 * @arg TIM_CHANNEL_5: TIM Channel 5 selected
1460 * @arg TIM_CHANNEL_6: TIM Channel 6 selected
1461 * @retval HAL status
1462 */
HAL_TIM_PWM_Start(TIM_HandleTypeDef * htim,uint32_t Channel)1463 HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
1464 {
1465 uint32_t tmpsmcr;
1466
1467 /* Check the parameters */
1468 assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
1469
1470 /* Check the TIM channel state */
1471 if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
1472 {
1473 return HAL_ERROR;
1474 }
1475
1476 /* Set the TIM channel state */
1477 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
1478
1479 /* Enable the Capture compare channel */
1480 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
1481
1482 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
1483 {
1484 /* Enable the main output */
1485 __HAL_TIM_MOE_ENABLE(htim);
1486 }
1487
1488 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
1489 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
1490 {
1491 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
1492 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
1493 {
1494 __HAL_TIM_ENABLE(htim);
1495 }
1496 }
1497 else
1498 {
1499 __HAL_TIM_ENABLE(htim);
1500 }
1501
1502 /* Return function status */
1503 return HAL_OK;
1504 }
1505
1506 /**
1507 * @brief Stops the PWM signal generation.
1508 * @param htim TIM PWM handle
1509 * @param Channel TIM Channels to be disabled
1510 * This parameter can be one of the following values:
1511 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
1512 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
1513 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
1514 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
1515 * @arg TIM_CHANNEL_5: TIM Channel 5 selected
1516 * @arg TIM_CHANNEL_6: TIM Channel 6 selected
1517 * @retval HAL status
1518 */
HAL_TIM_PWM_Stop(TIM_HandleTypeDef * htim,uint32_t Channel)1519 HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
1520 {
1521 /* Check the parameters */
1522 assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
1523
1524 /* Disable the Capture compare channel */
1525 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
1526
1527 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
1528 {
1529 /* Disable the Main Output */
1530 __HAL_TIM_MOE_DISABLE(htim);
1531 }
1532
1533 /* Disable the Peripheral */
1534 __HAL_TIM_DISABLE(htim);
1535
1536 /* Set the TIM channel state */
1537 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
1538
1539 /* Return function status */
1540 return HAL_OK;
1541 }
1542
1543 /**
1544 * @brief Starts the PWM signal generation in interrupt mode.
1545 * @param htim TIM PWM handle
1546 * @param Channel TIM Channel to be enabled
1547 * This parameter can be one of the following values:
1548 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
1549 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
1550 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
1551 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
1552 * @retval HAL status
1553 */
HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef * htim,uint32_t Channel)1554 HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
1555 {
1556 HAL_StatusTypeDef status = HAL_OK;
1557 uint32_t tmpsmcr;
1558
1559 /* Check the parameters */
1560 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
1561
1562 /* Check the TIM channel state */
1563 if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
1564 {
1565 return HAL_ERROR;
1566 }
1567
1568 /* Set the TIM channel state */
1569 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
1570
1571 switch (Channel)
1572 {
1573 case TIM_CHANNEL_1:
1574 {
1575 /* Enable the TIM Capture/Compare 1 interrupt */
1576 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
1577 break;
1578 }
1579
1580 case TIM_CHANNEL_2:
1581 {
1582 /* Enable the TIM Capture/Compare 2 interrupt */
1583 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
1584 break;
1585 }
1586
1587 case TIM_CHANNEL_3:
1588 {
1589 /* Enable the TIM Capture/Compare 3 interrupt */
1590 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
1591 break;
1592 }
1593
1594 case TIM_CHANNEL_4:
1595 {
1596 /* Enable the TIM Capture/Compare 4 interrupt */
1597 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
1598 break;
1599 }
1600
1601 default:
1602 status = HAL_ERROR;
1603 break;
1604 }
1605
1606 if (status == HAL_OK)
1607 {
1608 /* Enable the Capture compare channel */
1609 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
1610
1611 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
1612 {
1613 /* Enable the main output */
1614 __HAL_TIM_MOE_ENABLE(htim);
1615 }
1616
1617 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
1618 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
1619 {
1620 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
1621 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
1622 {
1623 __HAL_TIM_ENABLE(htim);
1624 }
1625 }
1626 else
1627 {
1628 __HAL_TIM_ENABLE(htim);
1629 }
1630 }
1631
1632 /* Return function status */
1633 return status;
1634 }
1635
1636 /**
1637 * @brief Stops the PWM signal generation in interrupt mode.
1638 * @param htim TIM PWM handle
1639 * @param Channel TIM Channels to be disabled
1640 * This parameter can be one of the following values:
1641 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
1642 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
1643 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
1644 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
1645 * @retval HAL status
1646 */
HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef * htim,uint32_t Channel)1647 HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
1648 {
1649 HAL_StatusTypeDef status = HAL_OK;
1650
1651 /* Check the parameters */
1652 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
1653
1654 switch (Channel)
1655 {
1656 case TIM_CHANNEL_1:
1657 {
1658 /* Disable the TIM Capture/Compare 1 interrupt */
1659 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
1660 break;
1661 }
1662
1663 case TIM_CHANNEL_2:
1664 {
1665 /* Disable the TIM Capture/Compare 2 interrupt */
1666 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
1667 break;
1668 }
1669
1670 case TIM_CHANNEL_3:
1671 {
1672 /* Disable the TIM Capture/Compare 3 interrupt */
1673 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
1674 break;
1675 }
1676
1677 case TIM_CHANNEL_4:
1678 {
1679 /* Disable the TIM Capture/Compare 4 interrupt */
1680 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
1681 break;
1682 }
1683
1684 default:
1685 status = HAL_ERROR;
1686 break;
1687 }
1688
1689 if (status == HAL_OK)
1690 {
1691 /* Disable the Capture compare channel */
1692 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
1693
1694 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
1695 {
1696 /* Disable the Main Output */
1697 __HAL_TIM_MOE_DISABLE(htim);
1698 }
1699
1700 /* Disable the Peripheral */
1701 __HAL_TIM_DISABLE(htim);
1702
1703 /* Set the TIM channel state */
1704 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
1705 }
1706
1707 /* Return function status */
1708 return status;
1709 }
1710
1711 /**
1712 * @brief Starts the TIM PWM signal generation in DMA mode.
1713 * @param htim TIM PWM handle
1714 * @param Channel TIM Channels to be enabled
1715 * This parameter can be one of the following values:
1716 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
1717 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
1718 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
1719 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
1720 * @param pData The source Buffer address.
1721 * @param Length The length of data to be transferred from memory to TIM peripheral
1722 * @retval HAL status
1723 */
HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef * htim,uint32_t Channel,const uint32_t * pData,uint16_t Length)1724 HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
1725 uint16_t Length)
1726 {
1727 HAL_StatusTypeDef status = HAL_OK;
1728 uint32_t tmpsmcr;
1729
1730 /* Check the parameters */
1731 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
1732
1733 /* Set the TIM channel state */
1734 if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
1735 {
1736 return HAL_BUSY;
1737 }
1738 else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
1739 {
1740 if ((pData == NULL) || (Length == 0U))
1741 {
1742 return HAL_ERROR;
1743 }
1744 else
1745 {
1746 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
1747 }
1748 }
1749 else
1750 {
1751 return HAL_ERROR;
1752 }
1753
1754 switch (Channel)
1755 {
1756 case TIM_CHANNEL_1:
1757 {
1758 /* Set the DMA compare callbacks */
1759 htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
1760 htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
1761
1762 /* Set the DMA error callback */
1763 htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
1764
1765 /* Enable the DMA channel */
1766 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
1767 Length) != HAL_OK)
1768 {
1769 /* Return error status */
1770 return HAL_ERROR;
1771 }
1772
1773 /* Enable the TIM Capture/Compare 1 DMA request */
1774 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
1775 break;
1776 }
1777
1778 case TIM_CHANNEL_2:
1779 {
1780 /* Set the DMA compare callbacks */
1781 htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
1782 htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
1783
1784 /* Set the DMA error callback */
1785 htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
1786
1787 /* Enable the DMA channel */
1788 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
1789 Length) != HAL_OK)
1790 {
1791 /* Return error status */
1792 return HAL_ERROR;
1793 }
1794 /* Enable the TIM Capture/Compare 2 DMA request */
1795 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
1796 break;
1797 }
1798
1799 case TIM_CHANNEL_3:
1800 {
1801 /* Set the DMA compare callbacks */
1802 htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
1803 htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
1804
1805 /* Set the DMA error callback */
1806 htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
1807
1808 /* Enable the DMA channel */
1809 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
1810 Length) != HAL_OK)
1811 {
1812 /* Return error status */
1813 return HAL_ERROR;
1814 }
1815 /* Enable the TIM Output Capture/Compare 3 request */
1816 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
1817 break;
1818 }
1819
1820 case TIM_CHANNEL_4:
1821 {
1822 /* Set the DMA compare callbacks */
1823 htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
1824 htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
1825
1826 /* Set the DMA error callback */
1827 htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
1828
1829 /* Enable the DMA channel */
1830 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4,
1831 Length) != HAL_OK)
1832 {
1833 /* Return error status */
1834 return HAL_ERROR;
1835 }
1836 /* Enable the TIM Capture/Compare 4 DMA request */
1837 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
1838 break;
1839 }
1840
1841 default:
1842 status = HAL_ERROR;
1843 break;
1844 }
1845
1846 if (status == HAL_OK)
1847 {
1848 /* Enable the Capture compare channel */
1849 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
1850
1851 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
1852 {
1853 /* Enable the main output */
1854 __HAL_TIM_MOE_ENABLE(htim);
1855 }
1856
1857 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
1858 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
1859 {
1860 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
1861 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
1862 {
1863 __HAL_TIM_ENABLE(htim);
1864 }
1865 }
1866 else
1867 {
1868 __HAL_TIM_ENABLE(htim);
1869 }
1870 }
1871
1872 /* Return function status */
1873 return status;
1874 }
1875
1876 /**
1877 * @brief Stops the TIM PWM signal generation in DMA mode.
1878 * @param htim TIM PWM handle
1879 * @param Channel TIM Channels to be disabled
1880 * This parameter can be one of the following values:
1881 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
1882 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
1883 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
1884 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
1885 * @retval HAL status
1886 */
HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef * htim,uint32_t Channel)1887 HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
1888 {
1889 HAL_StatusTypeDef status = HAL_OK;
1890
1891 /* Check the parameters */
1892 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
1893
1894 switch (Channel)
1895 {
1896 case TIM_CHANNEL_1:
1897 {
1898 /* Disable the TIM Capture/Compare 1 DMA request */
1899 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
1900 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
1901 break;
1902 }
1903
1904 case TIM_CHANNEL_2:
1905 {
1906 /* Disable the TIM Capture/Compare 2 DMA request */
1907 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
1908 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
1909 break;
1910 }
1911
1912 case TIM_CHANNEL_3:
1913 {
1914 /* Disable the TIM Capture/Compare 3 DMA request */
1915 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
1916 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
1917 break;
1918 }
1919
1920 case TIM_CHANNEL_4:
1921 {
1922 /* Disable the TIM Capture/Compare 4 interrupt */
1923 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
1924 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
1925 break;
1926 }
1927
1928 default:
1929 status = HAL_ERROR;
1930 break;
1931 }
1932
1933 if (status == HAL_OK)
1934 {
1935 /* Disable the Capture compare channel */
1936 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
1937
1938 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
1939 {
1940 /* Disable the Main Output */
1941 __HAL_TIM_MOE_DISABLE(htim);
1942 }
1943
1944 /* Disable the Peripheral */
1945 __HAL_TIM_DISABLE(htim);
1946
1947 /* Set the TIM channel state */
1948 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
1949 }
1950
1951 /* Return function status */
1952 return status;
1953 }
1954
1955 /**
1956 * @}
1957 */
1958
1959 /** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions
1960 * @brief TIM Input Capture functions
1961 *
1962 @verbatim
1963 ==============================================================================
1964 ##### TIM Input Capture functions #####
1965 ==============================================================================
1966 [..]
1967 This section provides functions allowing to:
1968 (+) Initialize and configure the TIM Input Capture.
1969 (+) De-initialize the TIM Input Capture.
1970 (+) Start the TIM Input Capture.
1971 (+) Stop the TIM Input Capture.
1972 (+) Start the TIM Input Capture and enable interrupt.
1973 (+) Stop the TIM Input Capture and disable interrupt.
1974 (+) Start the TIM Input Capture and enable DMA transfer.
1975 (+) Stop the TIM Input Capture and disable DMA transfer.
1976
1977 @endverbatim
1978 * @{
1979 */
1980 /**
1981 * @brief Initializes the TIM Input Capture Time base according to the specified
1982 * parameters in the TIM_HandleTypeDef and initializes the associated handle.
1983 * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
1984 * requires a timer reset to avoid unexpected direction
1985 * due to DIR bit readonly in center aligned mode.
1986 * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init()
1987 * @param htim TIM Input Capture handle
1988 * @retval HAL status
1989 */
HAL_TIM_IC_Init(TIM_HandleTypeDef * htim)1990 HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
1991 {
1992 /* Check the TIM handle allocation */
1993 if (htim == NULL)
1994 {
1995 return HAL_ERROR;
1996 }
1997
1998 /* Check the parameters */
1999 assert_param(IS_TIM_INSTANCE(htim->Instance));
2000 assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
2001 assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
2002 assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
2003 assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
2004
2005 if (htim->State == HAL_TIM_STATE_RESET)
2006 {
2007 /* Allocate lock resource and initialize it */
2008 htim->Lock = HAL_UNLOCKED;
2009
2010 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
2011 /* Reset interrupt callbacks to legacy weak callbacks */
2012 TIM_ResetCallback(htim);
2013
2014 if (htim->IC_MspInitCallback == NULL)
2015 {
2016 htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
2017 }
2018 /* Init the low level hardware : GPIO, CLOCK, NVIC */
2019 htim->IC_MspInitCallback(htim);
2020 #else
2021 /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
2022 HAL_TIM_IC_MspInit(htim);
2023 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
2024 }
2025
2026 /* Set the TIM state */
2027 htim->State = HAL_TIM_STATE_BUSY;
2028
2029 /* Init the base time for the input capture */
2030 TIM_Base_SetConfig(htim->Instance, &htim->Init);
2031
2032 /* Initialize the DMA burst operation state */
2033 htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
2034
2035 /* Initialize the TIM channels state */
2036 TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
2037 TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
2038
2039 /* Initialize the TIM state*/
2040 htim->State = HAL_TIM_STATE_READY;
2041
2042 return HAL_OK;
2043 }
2044
2045 /**
2046 * @brief DeInitializes the TIM peripheral
2047 * @param htim TIM Input Capture handle
2048 * @retval HAL status
2049 */
HAL_TIM_IC_DeInit(TIM_HandleTypeDef * htim)2050 HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
2051 {
2052 /* Check the parameters */
2053 assert_param(IS_TIM_INSTANCE(htim->Instance));
2054
2055 htim->State = HAL_TIM_STATE_BUSY;
2056
2057 /* Disable the TIM Peripheral Clock */
2058 __HAL_TIM_DISABLE(htim);
2059
2060 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
2061 if (htim->IC_MspDeInitCallback == NULL)
2062 {
2063 htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
2064 }
2065 /* DeInit the low level hardware */
2066 htim->IC_MspDeInitCallback(htim);
2067 #else
2068 /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
2069 HAL_TIM_IC_MspDeInit(htim);
2070 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
2071
2072 /* Change the DMA burst operation state */
2073 htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
2074
2075 /* Change the TIM channels state */
2076 TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
2077 TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
2078
2079 /* Change TIM state */
2080 htim->State = HAL_TIM_STATE_RESET;
2081
2082 /* Release Lock */
2083 __HAL_UNLOCK(htim);
2084
2085 return HAL_OK;
2086 }
2087
2088 /**
2089 * @brief Initializes the TIM Input Capture MSP.
2090 * @param htim TIM Input Capture handle
2091 * @retval None
2092 */
HAL_TIM_IC_MspInit(TIM_HandleTypeDef * htim)2093 __weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
2094 {
2095 /* Prevent unused argument(s) compilation warning */
2096 UNUSED(htim);
2097
2098 /* NOTE : This function should not be modified, when the callback is needed,
2099 the HAL_TIM_IC_MspInit could be implemented in the user file
2100 */
2101 }
2102
2103 /**
2104 * @brief DeInitializes TIM Input Capture MSP.
2105 * @param htim TIM handle
2106 * @retval None
2107 */
HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef * htim)2108 __weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
2109 {
2110 /* Prevent unused argument(s) compilation warning */
2111 UNUSED(htim);
2112
2113 /* NOTE : This function should not be modified, when the callback is needed,
2114 the HAL_TIM_IC_MspDeInit could be implemented in the user file
2115 */
2116 }
2117
2118 /**
2119 * @brief Starts the TIM Input Capture measurement.
2120 * @param htim TIM Input Capture handle
2121 * @param Channel TIM Channels to be enabled
2122 * This parameter can be one of the following values:
2123 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
2124 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
2125 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
2126 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
2127 * @retval HAL status
2128 */
HAL_TIM_IC_Start(TIM_HandleTypeDef * htim,uint32_t Channel)2129 HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
2130 {
2131 uint32_t tmpsmcr;
2132 HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
2133 HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
2134
2135 /* Check the parameters */
2136 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
2137
2138 /* Check the TIM channel state */
2139 if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
2140 || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
2141 {
2142 return HAL_ERROR;
2143 }
2144
2145 /* Set the TIM channel state */
2146 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
2147 TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
2148
2149 /* Enable the Input Capture channel */
2150 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
2151
2152 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
2153 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
2154 {
2155 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
2156 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
2157 {
2158 __HAL_TIM_ENABLE(htim);
2159 }
2160 }
2161 else
2162 {
2163 __HAL_TIM_ENABLE(htim);
2164 }
2165
2166 /* Return function status */
2167 return HAL_OK;
2168 }
2169
2170 /**
2171 * @brief Stops the TIM Input Capture measurement.
2172 * @param htim TIM Input Capture handle
2173 * @param Channel TIM Channels to be disabled
2174 * This parameter can be one of the following values:
2175 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
2176 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
2177 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
2178 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
2179 * @retval HAL status
2180 */
HAL_TIM_IC_Stop(TIM_HandleTypeDef * htim,uint32_t Channel)2181 HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
2182 {
2183 /* Check the parameters */
2184 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
2185
2186 /* Disable the Input Capture channel */
2187 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
2188
2189 /* Disable the Peripheral */
2190 __HAL_TIM_DISABLE(htim);
2191
2192 /* Set the TIM channel state */
2193 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
2194 TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
2195
2196 /* Return function status */
2197 return HAL_OK;
2198 }
2199
2200 /**
2201 * @brief Starts the TIM Input Capture measurement in interrupt mode.
2202 * @param htim TIM Input Capture handle
2203 * @param Channel TIM Channels to be enabled
2204 * This parameter can be one of the following values:
2205 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
2206 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
2207 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
2208 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
2209 * @retval HAL status
2210 */
HAL_TIM_IC_Start_IT(TIM_HandleTypeDef * htim,uint32_t Channel)2211 HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
2212 {
2213 HAL_StatusTypeDef status = HAL_OK;
2214 uint32_t tmpsmcr;
2215
2216 HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
2217 HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
2218
2219 /* Check the parameters */
2220 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
2221
2222 /* Check the TIM channel state */
2223 if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
2224 || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
2225 {
2226 return HAL_ERROR;
2227 }
2228
2229 /* Set the TIM channel state */
2230 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
2231 TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
2232
2233 switch (Channel)
2234 {
2235 case TIM_CHANNEL_1:
2236 {
2237 /* Enable the TIM Capture/Compare 1 interrupt */
2238 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
2239 break;
2240 }
2241
2242 case TIM_CHANNEL_2:
2243 {
2244 /* Enable the TIM Capture/Compare 2 interrupt */
2245 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
2246 break;
2247 }
2248
2249 case TIM_CHANNEL_3:
2250 {
2251 /* Enable the TIM Capture/Compare 3 interrupt */
2252 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
2253 break;
2254 }
2255
2256 case TIM_CHANNEL_4:
2257 {
2258 /* Enable the TIM Capture/Compare 4 interrupt */
2259 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
2260 break;
2261 }
2262
2263 default:
2264 status = HAL_ERROR;
2265 break;
2266 }
2267
2268 if (status == HAL_OK)
2269 {
2270 /* Enable the Input Capture channel */
2271 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
2272
2273 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
2274 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
2275 {
2276 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
2277 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
2278 {
2279 __HAL_TIM_ENABLE(htim);
2280 }
2281 }
2282 else
2283 {
2284 __HAL_TIM_ENABLE(htim);
2285 }
2286 }
2287
2288 /* Return function status */
2289 return status;
2290 }
2291
2292 /**
2293 * @brief Stops the TIM Input Capture measurement in interrupt mode.
2294 * @param htim TIM Input Capture handle
2295 * @param Channel TIM Channels to be disabled
2296 * This parameter can be one of the following values:
2297 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
2298 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
2299 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
2300 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
2301 * @retval HAL status
2302 */
HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef * htim,uint32_t Channel)2303 HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
2304 {
2305 HAL_StatusTypeDef status = HAL_OK;
2306
2307 /* Check the parameters */
2308 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
2309
2310 switch (Channel)
2311 {
2312 case TIM_CHANNEL_1:
2313 {
2314 /* Disable the TIM Capture/Compare 1 interrupt */
2315 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
2316 break;
2317 }
2318
2319 case TIM_CHANNEL_2:
2320 {
2321 /* Disable the TIM Capture/Compare 2 interrupt */
2322 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
2323 break;
2324 }
2325
2326 case TIM_CHANNEL_3:
2327 {
2328 /* Disable the TIM Capture/Compare 3 interrupt */
2329 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
2330 break;
2331 }
2332
2333 case TIM_CHANNEL_4:
2334 {
2335 /* Disable the TIM Capture/Compare 4 interrupt */
2336 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
2337 break;
2338 }
2339
2340 default:
2341 status = HAL_ERROR;
2342 break;
2343 }
2344
2345 if (status == HAL_OK)
2346 {
2347 /* Disable the Input Capture channel */
2348 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
2349
2350 /* Disable the Peripheral */
2351 __HAL_TIM_DISABLE(htim);
2352
2353 /* Set the TIM channel state */
2354 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
2355 TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
2356 }
2357
2358 /* Return function status */
2359 return status;
2360 }
2361
2362 /**
2363 * @brief Starts the TIM Input Capture measurement in DMA mode.
2364 * @param htim TIM Input Capture handle
2365 * @param Channel TIM Channels to be enabled
2366 * This parameter can be one of the following values:
2367 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
2368 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
2369 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
2370 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
2371 * @param pData The destination Buffer address.
2372 * @param Length The length of data to be transferred from TIM peripheral to memory.
2373 * @retval HAL status
2374 */
HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef * htim,uint32_t Channel,uint32_t * pData,uint16_t Length)2375 HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
2376 {
2377 HAL_StatusTypeDef status = HAL_OK;
2378 uint32_t tmpsmcr;
2379
2380 HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
2381 HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
2382
2383 /* Check the parameters */
2384 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
2385 assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
2386
2387 /* Set the TIM channel state */
2388 if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY)
2389 || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY))
2390 {
2391 return HAL_BUSY;
2392 }
2393 else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY)
2394 && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY))
2395 {
2396 if ((pData == NULL) || (Length == 0U))
2397 {
2398 return HAL_ERROR;
2399 }
2400 else
2401 {
2402 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
2403 TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
2404 }
2405 }
2406 else
2407 {
2408 return HAL_ERROR;
2409 }
2410
2411 /* Enable the Input Capture channel */
2412 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
2413
2414 switch (Channel)
2415 {
2416 case TIM_CHANNEL_1:
2417 {
2418 /* Set the DMA capture callbacks */
2419 htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
2420 htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
2421
2422 /* Set the DMA error callback */
2423 htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
2424
2425 /* Enable the DMA channel */
2426 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData,
2427 Length) != HAL_OK)
2428 {
2429 /* Return error status */
2430 return HAL_ERROR;
2431 }
2432 /* Enable the TIM Capture/Compare 1 DMA request */
2433 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
2434 break;
2435 }
2436
2437 case TIM_CHANNEL_2:
2438 {
2439 /* Set the DMA capture callbacks */
2440 htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
2441 htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
2442
2443 /* Set the DMA error callback */
2444 htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
2445
2446 /* Enable the DMA channel */
2447 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData,
2448 Length) != HAL_OK)
2449 {
2450 /* Return error status */
2451 return HAL_ERROR;
2452 }
2453 /* Enable the TIM Capture/Compare 2 DMA request */
2454 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
2455 break;
2456 }
2457
2458 case TIM_CHANNEL_3:
2459 {
2460 /* Set the DMA capture callbacks */
2461 htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
2462 htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
2463
2464 /* Set the DMA error callback */
2465 htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
2466
2467 /* Enable the DMA channel */
2468 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData,
2469 Length) != HAL_OK)
2470 {
2471 /* Return error status */
2472 return HAL_ERROR;
2473 }
2474 /* Enable the TIM Capture/Compare 3 DMA request */
2475 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
2476 break;
2477 }
2478
2479 case TIM_CHANNEL_4:
2480 {
2481 /* Set the DMA capture callbacks */
2482 htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
2483 htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
2484
2485 /* Set the DMA error callback */
2486 htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
2487
2488 /* Enable the DMA channel */
2489 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData,
2490 Length) != HAL_OK)
2491 {
2492 /* Return error status */
2493 return HAL_ERROR;
2494 }
2495 /* Enable the TIM Capture/Compare 4 DMA request */
2496 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
2497 break;
2498 }
2499
2500 default:
2501 status = HAL_ERROR;
2502 break;
2503 }
2504
2505 /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
2506 if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
2507 {
2508 tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
2509 if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
2510 {
2511 __HAL_TIM_ENABLE(htim);
2512 }
2513 }
2514 else
2515 {
2516 __HAL_TIM_ENABLE(htim);
2517 }
2518
2519 /* Return function status */
2520 return status;
2521 }
2522
2523 /**
2524 * @brief Stops the TIM Input Capture measurement in DMA mode.
2525 * @param htim TIM Input Capture handle
2526 * @param Channel TIM Channels to be disabled
2527 * This parameter can be one of the following values:
2528 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
2529 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
2530 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
2531 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
2532 * @retval HAL status
2533 */
HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef * htim,uint32_t Channel)2534 HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
2535 {
2536 HAL_StatusTypeDef status = HAL_OK;
2537
2538 /* Check the parameters */
2539 assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
2540 assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
2541
2542 /* Disable the Input Capture channel */
2543 TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
2544
2545 switch (Channel)
2546 {
2547 case TIM_CHANNEL_1:
2548 {
2549 /* Disable the TIM Capture/Compare 1 DMA request */
2550 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
2551 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
2552 break;
2553 }
2554
2555 case TIM_CHANNEL_2:
2556 {
2557 /* Disable the TIM Capture/Compare 2 DMA request */
2558 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
2559 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
2560 break;
2561 }
2562
2563 case TIM_CHANNEL_3:
2564 {
2565 /* Disable the TIM Capture/Compare 3 DMA request */
2566 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
2567 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
2568 break;
2569 }
2570
2571 case TIM_CHANNEL_4:
2572 {
2573 /* Disable the TIM Capture/Compare 4 DMA request */
2574 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
2575 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
2576 break;
2577 }
2578
2579 default:
2580 status = HAL_ERROR;
2581 break;
2582 }
2583
2584 if (status == HAL_OK)
2585 {
2586 /* Disable the Peripheral */
2587 __HAL_TIM_DISABLE(htim);
2588
2589 /* Set the TIM channel state */
2590 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
2591 TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
2592 }
2593
2594 /* Return function status */
2595 return status;
2596 }
2597 /**
2598 * @}
2599 */
2600
2601 /** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions
2602 * @brief TIM One Pulse functions
2603 *
2604 @verbatim
2605 ==============================================================================
2606 ##### TIM One Pulse functions #####
2607 ==============================================================================
2608 [..]
2609 This section provides functions allowing to:
2610 (+) Initialize and configure the TIM One Pulse.
2611 (+) De-initialize the TIM One Pulse.
2612 (+) Start the TIM One Pulse.
2613 (+) Stop the TIM One Pulse.
2614 (+) Start the TIM One Pulse and enable interrupt.
2615 (+) Stop the TIM One Pulse and disable interrupt.
2616 (+) Start the TIM One Pulse and enable DMA transfer.
2617 (+) Stop the TIM One Pulse and disable DMA transfer.
2618
2619 @endverbatim
2620 * @{
2621 */
2622 /**
2623 * @brief Initializes the TIM One Pulse Time Base according to the specified
2624 * parameters in the TIM_HandleTypeDef and initializes the associated handle.
2625 * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
2626 * requires a timer reset to avoid unexpected direction
2627 * due to DIR bit readonly in center aligned mode.
2628 * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init()
2629 * @note When the timer instance is initialized in One Pulse mode, timer
2630 * channels 1 and channel 2 are reserved and cannot be used for other
2631 * purpose.
2632 * @param htim TIM One Pulse handle
2633 * @param OnePulseMode Select the One pulse mode.
2634 * This parameter can be one of the following values:
2635 * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
2636 * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
2637 * @retval HAL status
2638 */
HAL_TIM_OnePulse_Init(TIM_HandleTypeDef * htim,uint32_t OnePulseMode)2639 HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
2640 {
2641 /* Check the TIM handle allocation */
2642 if (htim == NULL)
2643 {
2644 return HAL_ERROR;
2645 }
2646
2647 /* Check the parameters */
2648 assert_param(IS_TIM_INSTANCE(htim->Instance));
2649 assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
2650 assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
2651 assert_param(IS_TIM_OPM_MODE(OnePulseMode));
2652 assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
2653 assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
2654
2655 if (htim->State == HAL_TIM_STATE_RESET)
2656 {
2657 /* Allocate lock resource and initialize it */
2658 htim->Lock = HAL_UNLOCKED;
2659
2660 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
2661 /* Reset interrupt callbacks to legacy weak callbacks */
2662 TIM_ResetCallback(htim);
2663
2664 if (htim->OnePulse_MspInitCallback == NULL)
2665 {
2666 htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
2667 }
2668 /* Init the low level hardware : GPIO, CLOCK, NVIC */
2669 htim->OnePulse_MspInitCallback(htim);
2670 #else
2671 /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
2672 HAL_TIM_OnePulse_MspInit(htim);
2673 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
2674 }
2675
2676 /* Set the TIM state */
2677 htim->State = HAL_TIM_STATE_BUSY;
2678
2679 /* Configure the Time base in the One Pulse Mode */
2680 TIM_Base_SetConfig(htim->Instance, &htim->Init);
2681
2682 /* Reset the OPM Bit */
2683 htim->Instance->CR1 &= ~TIM_CR1_OPM;
2684
2685 /* Configure the OPM Mode */
2686 htim->Instance->CR1 |= OnePulseMode;
2687
2688 /* Initialize the DMA burst operation state */
2689 htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
2690
2691 /* Initialize the TIM channels state */
2692 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
2693 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
2694 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
2695 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
2696
2697 /* Initialize the TIM state*/
2698 htim->State = HAL_TIM_STATE_READY;
2699
2700 return HAL_OK;
2701 }
2702
2703 /**
2704 * @brief DeInitializes the TIM One Pulse
2705 * @param htim TIM One Pulse handle
2706 * @retval HAL status
2707 */
HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef * htim)2708 HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
2709 {
2710 /* Check the parameters */
2711 assert_param(IS_TIM_INSTANCE(htim->Instance));
2712
2713 htim->State = HAL_TIM_STATE_BUSY;
2714
2715 /* Disable the TIM Peripheral Clock */
2716 __HAL_TIM_DISABLE(htim);
2717
2718 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
2719 if (htim->OnePulse_MspDeInitCallback == NULL)
2720 {
2721 htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
2722 }
2723 /* DeInit the low level hardware */
2724 htim->OnePulse_MspDeInitCallback(htim);
2725 #else
2726 /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
2727 HAL_TIM_OnePulse_MspDeInit(htim);
2728 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
2729
2730 /* Change the DMA burst operation state */
2731 htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
2732
2733 /* Set the TIM channel state */
2734 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
2735 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
2736 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
2737 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
2738
2739 /* Change TIM state */
2740 htim->State = HAL_TIM_STATE_RESET;
2741
2742 /* Release Lock */
2743 __HAL_UNLOCK(htim);
2744
2745 return HAL_OK;
2746 }
2747
2748 /**
2749 * @brief Initializes the TIM One Pulse MSP.
2750 * @param htim TIM One Pulse handle
2751 * @retval None
2752 */
HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef * htim)2753 __weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
2754 {
2755 /* Prevent unused argument(s) compilation warning */
2756 UNUSED(htim);
2757
2758 /* NOTE : This function should not be modified, when the callback is needed,
2759 the HAL_TIM_OnePulse_MspInit could be implemented in the user file
2760 */
2761 }
2762
2763 /**
2764 * @brief DeInitializes TIM One Pulse MSP.
2765 * @param htim TIM One Pulse handle
2766 * @retval None
2767 */
HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef * htim)2768 __weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
2769 {
2770 /* Prevent unused argument(s) compilation warning */
2771 UNUSED(htim);
2772
2773 /* NOTE : This function should not be modified, when the callback is needed,
2774 the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
2775 */
2776 }
2777
2778 /**
2779 * @brief Starts the TIM One Pulse signal generation.
2780 * @note Though OutputChannel parameter is deprecated and ignored by the function
2781 * it has been kept to avoid HAL_TIM API compatibility break.
2782 * @note The pulse output channel is determined when calling
2783 * @ref HAL_TIM_OnePulse_ConfigChannel().
2784 * @param htim TIM One Pulse handle
2785 * @param OutputChannel See note above
2786 * @retval HAL status
2787 */
HAL_TIM_OnePulse_Start(TIM_HandleTypeDef * htim,uint32_t OutputChannel)2788 HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
2789 {
2790 HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
2791 HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
2792 HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
2793 HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
2794
2795 /* Prevent unused argument(s) compilation warning */
2796 UNUSED(OutputChannel);
2797
2798 /* Check the TIM channels state */
2799 if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
2800 || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
2801 || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
2802 || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
2803 {
2804 return HAL_ERROR;
2805 }
2806
2807 /* Set the TIM channels state */
2808 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
2809 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
2810 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
2811 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
2812
2813 /* Enable the Capture compare and the Input Capture channels
2814 (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
2815 if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
2816 if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
2817 whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
2818
2819 No need to enable the counter, it's enabled automatically by hardware
2820 (the counter starts in response to a stimulus and generate a pulse */
2821
2822 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
2823 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
2824
2825 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
2826 {
2827 /* Enable the main output */
2828 __HAL_TIM_MOE_ENABLE(htim);
2829 }
2830
2831 /* Return function status */
2832 return HAL_OK;
2833 }
2834
2835 /**
2836 * @brief Stops the TIM One Pulse signal generation.
2837 * @note Though OutputChannel parameter is deprecated and ignored by the function
2838 * it has been kept to avoid HAL_TIM API compatibility break.
2839 * @note The pulse output channel is determined when calling
2840 * @ref HAL_TIM_OnePulse_ConfigChannel().
2841 * @param htim TIM One Pulse handle
2842 * @param OutputChannel See note above
2843 * @retval HAL status
2844 */
HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef * htim,uint32_t OutputChannel)2845 HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
2846 {
2847 /* Prevent unused argument(s) compilation warning */
2848 UNUSED(OutputChannel);
2849
2850 /* Disable the Capture compare and the Input Capture channels
2851 (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
2852 if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
2853 if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
2854 whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
2855
2856 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
2857 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
2858
2859 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
2860 {
2861 /* Disable the Main Output */
2862 __HAL_TIM_MOE_DISABLE(htim);
2863 }
2864
2865 /* Disable the Peripheral */
2866 __HAL_TIM_DISABLE(htim);
2867
2868 /* Set the TIM channels state */
2869 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
2870 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
2871 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
2872 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
2873
2874 /* Return function status */
2875 return HAL_OK;
2876 }
2877
2878 /**
2879 * @brief Starts the TIM One Pulse signal generation in interrupt mode.
2880 * @note Though OutputChannel parameter is deprecated and ignored by the function
2881 * it has been kept to avoid HAL_TIM API compatibility break.
2882 * @note The pulse output channel is determined when calling
2883 * @ref HAL_TIM_OnePulse_ConfigChannel().
2884 * @param htim TIM One Pulse handle
2885 * @param OutputChannel See note above
2886 * @retval HAL status
2887 */
HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef * htim,uint32_t OutputChannel)2888 HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
2889 {
2890 HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
2891 HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
2892 HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
2893 HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
2894
2895 /* Prevent unused argument(s) compilation warning */
2896 UNUSED(OutputChannel);
2897
2898 /* Check the TIM channels state */
2899 if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
2900 || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
2901 || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
2902 || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
2903 {
2904 return HAL_ERROR;
2905 }
2906
2907 /* Set the TIM channels state */
2908 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
2909 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
2910 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
2911 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
2912
2913 /* Enable the Capture compare and the Input Capture channels
2914 (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
2915 if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
2916 if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
2917 whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
2918
2919 No need to enable the counter, it's enabled automatically by hardware
2920 (the counter starts in response to a stimulus and generate a pulse */
2921
2922 /* Enable the TIM Capture/Compare 1 interrupt */
2923 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
2924
2925 /* Enable the TIM Capture/Compare 2 interrupt */
2926 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
2927
2928 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
2929 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
2930
2931 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
2932 {
2933 /* Enable the main output */
2934 __HAL_TIM_MOE_ENABLE(htim);
2935 }
2936
2937 /* Return function status */
2938 return HAL_OK;
2939 }
2940
2941 /**
2942 * @brief Stops the TIM One Pulse signal generation in interrupt mode.
2943 * @note Though OutputChannel parameter is deprecated and ignored by the function
2944 * it has been kept to avoid HAL_TIM API compatibility break.
2945 * @note The pulse output channel is determined when calling
2946 * @ref HAL_TIM_OnePulse_ConfigChannel().
2947 * @param htim TIM One Pulse handle
2948 * @param OutputChannel See note above
2949 * @retval HAL status
2950 */
HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef * htim,uint32_t OutputChannel)2951 HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
2952 {
2953 /* Prevent unused argument(s) compilation warning */
2954 UNUSED(OutputChannel);
2955
2956 /* Disable the TIM Capture/Compare 1 interrupt */
2957 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
2958
2959 /* Disable the TIM Capture/Compare 2 interrupt */
2960 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
2961
2962 /* Disable the Capture compare and the Input Capture channels
2963 (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
2964 if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
2965 if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
2966 whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
2967 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
2968 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
2969
2970 if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
2971 {
2972 /* Disable the Main Output */
2973 __HAL_TIM_MOE_DISABLE(htim);
2974 }
2975
2976 /* Disable the Peripheral */
2977 __HAL_TIM_DISABLE(htim);
2978
2979 /* Set the TIM channels state */
2980 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
2981 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
2982 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
2983 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
2984
2985 /* Return function status */
2986 return HAL_OK;
2987 }
2988
2989 /**
2990 * @}
2991 */
2992
2993 /** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions
2994 * @brief TIM Encoder functions
2995 *
2996 @verbatim
2997 ==============================================================================
2998 ##### TIM Encoder functions #####
2999 ==============================================================================
3000 [..]
3001 This section provides functions allowing to:
3002 (+) Initialize and configure the TIM Encoder.
3003 (+) De-initialize the TIM Encoder.
3004 (+) Start the TIM Encoder.
3005 (+) Stop the TIM Encoder.
3006 (+) Start the TIM Encoder and enable interrupt.
3007 (+) Stop the TIM Encoder and disable interrupt.
3008 (+) Start the TIM Encoder and enable DMA transfer.
3009 (+) Stop the TIM Encoder and disable DMA transfer.
3010
3011 @endverbatim
3012 * @{
3013 */
3014 /**
3015 * @brief Initializes the TIM Encoder Interface and initialize the associated handle.
3016 * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
3017 * requires a timer reset to avoid unexpected direction
3018 * due to DIR bit readonly in center aligned mode.
3019 * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init()
3020 * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together
3021 * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource
3022 * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa
3023 * @note When the timer instance is initialized in Encoder mode, timer
3024 * channels 1 and channel 2 are reserved and cannot be used for other
3025 * purpose.
3026 * @param htim TIM Encoder Interface handle
3027 * @param sConfig TIM Encoder Interface configuration structure
3028 * @retval HAL status
3029 */
HAL_TIM_Encoder_Init(TIM_HandleTypeDef * htim,const TIM_Encoder_InitTypeDef * sConfig)3030 HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig)
3031 {
3032 uint32_t tmpsmcr;
3033 uint32_t tmpccmr1;
3034 uint32_t tmpccer;
3035
3036 /* Check the TIM handle allocation */
3037 if (htim == NULL)
3038 {
3039 return HAL_ERROR;
3040 }
3041
3042 /* Check the parameters */
3043 assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
3044 assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
3045 assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
3046 assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
3047 assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
3048 assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
3049 assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
3050 assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity));
3051 assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity));
3052 assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
3053 assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
3054 assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
3055 assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
3056 assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
3057
3058 if (htim->State == HAL_TIM_STATE_RESET)
3059 {
3060 /* Allocate lock resource and initialize it */
3061 htim->Lock = HAL_UNLOCKED;
3062
3063 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3064 /* Reset interrupt callbacks to legacy weak callbacks */
3065 TIM_ResetCallback(htim);
3066
3067 if (htim->Encoder_MspInitCallback == NULL)
3068 {
3069 htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
3070 }
3071 /* Init the low level hardware : GPIO, CLOCK, NVIC */
3072 htim->Encoder_MspInitCallback(htim);
3073 #else
3074 /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
3075 HAL_TIM_Encoder_MspInit(htim);
3076 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3077 }
3078
3079 /* Set the TIM state */
3080 htim->State = HAL_TIM_STATE_BUSY;
3081
3082 /* Reset the SMS and ECE bits */
3083 htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE);
3084
3085 /* Configure the Time base in the Encoder Mode */
3086 TIM_Base_SetConfig(htim->Instance, &htim->Init);
3087
3088 /* Get the TIMx SMCR register value */
3089 tmpsmcr = htim->Instance->SMCR;
3090
3091 /* Get the TIMx CCMR1 register value */
3092 tmpccmr1 = htim->Instance->CCMR1;
3093
3094 /* Get the TIMx CCER register value */
3095 tmpccer = htim->Instance->CCER;
3096
3097 /* Set the encoder Mode */
3098 tmpsmcr |= sConfig->EncoderMode;
3099
3100 /* Select the Capture Compare 1 and the Capture Compare 2 as input */
3101 tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
3102 tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U));
3103
3104 /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
3105 tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
3106 tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
3107 tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U);
3108 tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U);
3109
3110 /* Set the TI1 and the TI2 Polarities */
3111 tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
3112 tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
3113 tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U);
3114
3115 /* Write to TIMx SMCR */
3116 htim->Instance->SMCR = tmpsmcr;
3117
3118 /* Write to TIMx CCMR1 */
3119 htim->Instance->CCMR1 = tmpccmr1;
3120
3121 /* Write to TIMx CCER */
3122 htim->Instance->CCER = tmpccer;
3123
3124 /* Initialize the DMA burst operation state */
3125 htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
3126
3127 /* Set the TIM channels state */
3128 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
3129 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
3130 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
3131 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
3132
3133 /* Initialize the TIM state*/
3134 htim->State = HAL_TIM_STATE_READY;
3135
3136 return HAL_OK;
3137 }
3138
3139
3140 /**
3141 * @brief DeInitializes the TIM Encoder interface
3142 * @param htim TIM Encoder Interface handle
3143 * @retval HAL status
3144 */
HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef * htim)3145 HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
3146 {
3147 /* Check the parameters */
3148 assert_param(IS_TIM_INSTANCE(htim->Instance));
3149
3150 htim->State = HAL_TIM_STATE_BUSY;
3151
3152 /* Disable the TIM Peripheral Clock */
3153 __HAL_TIM_DISABLE(htim);
3154
3155 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3156 if (htim->Encoder_MspDeInitCallback == NULL)
3157 {
3158 htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
3159 }
3160 /* DeInit the low level hardware */
3161 htim->Encoder_MspDeInitCallback(htim);
3162 #else
3163 /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
3164 HAL_TIM_Encoder_MspDeInit(htim);
3165 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3166
3167 /* Change the DMA burst operation state */
3168 htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
3169
3170 /* Set the TIM channels state */
3171 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
3172 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
3173 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
3174 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
3175
3176 /* Change TIM state */
3177 htim->State = HAL_TIM_STATE_RESET;
3178
3179 /* Release Lock */
3180 __HAL_UNLOCK(htim);
3181
3182 return HAL_OK;
3183 }
3184
3185 /**
3186 * @brief Initializes the TIM Encoder Interface MSP.
3187 * @param htim TIM Encoder Interface handle
3188 * @retval None
3189 */
HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef * htim)3190 __weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
3191 {
3192 /* Prevent unused argument(s) compilation warning */
3193 UNUSED(htim);
3194
3195 /* NOTE : This function should not be modified, when the callback is needed,
3196 the HAL_TIM_Encoder_MspInit could be implemented in the user file
3197 */
3198 }
3199
3200 /**
3201 * @brief DeInitializes TIM Encoder Interface MSP.
3202 * @param htim TIM Encoder Interface handle
3203 * @retval None
3204 */
HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef * htim)3205 __weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
3206 {
3207 /* Prevent unused argument(s) compilation warning */
3208 UNUSED(htim);
3209
3210 /* NOTE : This function should not be modified, when the callback is needed,
3211 the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
3212 */
3213 }
3214
3215 /**
3216 * @brief Starts the TIM Encoder Interface.
3217 * @param htim TIM Encoder Interface handle
3218 * @param Channel TIM Channels to be enabled
3219 * This parameter can be one of the following values:
3220 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
3221 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
3222 * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
3223 * @retval HAL status
3224 */
HAL_TIM_Encoder_Start(TIM_HandleTypeDef * htim,uint32_t Channel)3225 HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
3226 {
3227 HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
3228 HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
3229 HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
3230 HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
3231
3232 /* Check the parameters */
3233 assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
3234
3235 /* Set the TIM channel(s) state */
3236 if (Channel == TIM_CHANNEL_1)
3237 {
3238 if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
3239 || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
3240 {
3241 return HAL_ERROR;
3242 }
3243 else
3244 {
3245 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3246 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3247 }
3248 }
3249 else if (Channel == TIM_CHANNEL_2)
3250 {
3251 if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
3252 || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
3253 {
3254 return HAL_ERROR;
3255 }
3256 else
3257 {
3258 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3259 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3260 }
3261 }
3262 else
3263 {
3264 if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
3265 || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
3266 || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
3267 || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
3268 {
3269 return HAL_ERROR;
3270 }
3271 else
3272 {
3273 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3274 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3275 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3276 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3277 }
3278 }
3279
3280 /* Enable the encoder interface channels */
3281 switch (Channel)
3282 {
3283 case TIM_CHANNEL_1:
3284 {
3285 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
3286 break;
3287 }
3288
3289 case TIM_CHANNEL_2:
3290 {
3291 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
3292 break;
3293 }
3294
3295 default :
3296 {
3297 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
3298 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
3299 break;
3300 }
3301 }
3302 /* Enable the Peripheral */
3303 __HAL_TIM_ENABLE(htim);
3304
3305 /* Return function status */
3306 return HAL_OK;
3307 }
3308
3309 /**
3310 * @brief Stops the TIM Encoder Interface.
3311 * @param htim TIM Encoder Interface handle
3312 * @param Channel TIM Channels to be disabled
3313 * This parameter can be one of the following values:
3314 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
3315 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
3316 * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
3317 * @retval HAL status
3318 */
HAL_TIM_Encoder_Stop(TIM_HandleTypeDef * htim,uint32_t Channel)3319 HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
3320 {
3321 /* Check the parameters */
3322 assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
3323
3324 /* Disable the Input Capture channels 1 and 2
3325 (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
3326 switch (Channel)
3327 {
3328 case TIM_CHANNEL_1:
3329 {
3330 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
3331 break;
3332 }
3333
3334 case TIM_CHANNEL_2:
3335 {
3336 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
3337 break;
3338 }
3339
3340 default :
3341 {
3342 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
3343 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
3344 break;
3345 }
3346 }
3347
3348 /* Disable the Peripheral */
3349 __HAL_TIM_DISABLE(htim);
3350
3351 /* Set the TIM channel(s) state */
3352 if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2))
3353 {
3354 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
3355 TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
3356 }
3357 else
3358 {
3359 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
3360 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
3361 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
3362 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
3363 }
3364
3365 /* Return function status */
3366 return HAL_OK;
3367 }
3368
3369 /**
3370 * @brief Starts the TIM Encoder Interface in interrupt mode.
3371 * @param htim TIM Encoder Interface handle
3372 * @param Channel TIM Channels to be enabled
3373 * This parameter can be one of the following values:
3374 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
3375 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
3376 * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
3377 * @retval HAL status
3378 */
HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef * htim,uint32_t Channel)3379 HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
3380 {
3381 HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
3382 HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
3383 HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
3384 HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
3385
3386 /* Check the parameters */
3387 assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
3388
3389 /* Set the TIM channel(s) state */
3390 if (Channel == TIM_CHANNEL_1)
3391 {
3392 if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
3393 || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
3394 {
3395 return HAL_ERROR;
3396 }
3397 else
3398 {
3399 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3400 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3401 }
3402 }
3403 else if (Channel == TIM_CHANNEL_2)
3404 {
3405 if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
3406 || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
3407 {
3408 return HAL_ERROR;
3409 }
3410 else
3411 {
3412 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3413 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3414 }
3415 }
3416 else
3417 {
3418 if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
3419 || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
3420 || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
3421 || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
3422 {
3423 return HAL_ERROR;
3424 }
3425 else
3426 {
3427 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3428 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3429 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3430 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3431 }
3432 }
3433
3434 /* Enable the encoder interface channels */
3435 /* Enable the capture compare Interrupts 1 and/or 2 */
3436 switch (Channel)
3437 {
3438 case TIM_CHANNEL_1:
3439 {
3440 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
3441 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
3442 break;
3443 }
3444
3445 case TIM_CHANNEL_2:
3446 {
3447 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
3448 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
3449 break;
3450 }
3451
3452 default :
3453 {
3454 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
3455 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
3456 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
3457 __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
3458 break;
3459 }
3460 }
3461
3462 /* Enable the Peripheral */
3463 __HAL_TIM_ENABLE(htim);
3464
3465 /* Return function status */
3466 return HAL_OK;
3467 }
3468
3469 /**
3470 * @brief Stops the TIM Encoder Interface in interrupt mode.
3471 * @param htim TIM Encoder Interface handle
3472 * @param Channel TIM Channels to be disabled
3473 * This parameter can be one of the following values:
3474 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
3475 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
3476 * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
3477 * @retval HAL status
3478 */
HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef * htim,uint32_t Channel)3479 HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
3480 {
3481 /* Check the parameters */
3482 assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
3483
3484 /* Disable the Input Capture channels 1 and 2
3485 (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
3486 if (Channel == TIM_CHANNEL_1)
3487 {
3488 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
3489
3490 /* Disable the capture compare Interrupts 1 */
3491 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
3492 }
3493 else if (Channel == TIM_CHANNEL_2)
3494 {
3495 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
3496
3497 /* Disable the capture compare Interrupts 2 */
3498 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
3499 }
3500 else
3501 {
3502 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
3503 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
3504
3505 /* Disable the capture compare Interrupts 1 and 2 */
3506 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
3507 __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
3508 }
3509
3510 /* Disable the Peripheral */
3511 __HAL_TIM_DISABLE(htim);
3512
3513 /* Set the TIM channel(s) state */
3514 if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2))
3515 {
3516 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
3517 TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
3518 }
3519 else
3520 {
3521 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
3522 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
3523 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
3524 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
3525 }
3526
3527 /* Return function status */
3528 return HAL_OK;
3529 }
3530
3531 /**
3532 * @brief Starts the TIM Encoder Interface in DMA mode.
3533 * @param htim TIM Encoder Interface handle
3534 * @param Channel TIM Channels to be enabled
3535 * This parameter can be one of the following values:
3536 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
3537 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
3538 * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
3539 * @param pData1 The destination Buffer address for IC1.
3540 * @param pData2 The destination Buffer address for IC2.
3541 * @param Length The length of data to be transferred from TIM peripheral to memory.
3542 * @retval HAL status
3543 */
HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef * htim,uint32_t Channel,uint32_t * pData1,uint32_t * pData2,uint16_t Length)3544 HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1,
3545 uint32_t *pData2, uint16_t Length)
3546 {
3547 HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
3548 HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
3549 HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
3550 HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
3551
3552 /* Check the parameters */
3553 assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
3554
3555 /* Set the TIM channel(s) state */
3556 if (Channel == TIM_CHANNEL_1)
3557 {
3558 if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
3559 || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY))
3560 {
3561 return HAL_BUSY;
3562 }
3563 else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
3564 && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY))
3565 {
3566 if ((pData1 == NULL) || (Length == 0U))
3567 {
3568 return HAL_ERROR;
3569 }
3570 else
3571 {
3572 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3573 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3574 }
3575 }
3576 else
3577 {
3578 return HAL_ERROR;
3579 }
3580 }
3581 else if (Channel == TIM_CHANNEL_2)
3582 {
3583 if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)
3584 || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
3585 {
3586 return HAL_BUSY;
3587 }
3588 else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY)
3589 && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
3590 {
3591 if ((pData2 == NULL) || (Length == 0U))
3592 {
3593 return HAL_ERROR;
3594 }
3595 else
3596 {
3597 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3598 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3599 }
3600 }
3601 else
3602 {
3603 return HAL_ERROR;
3604 }
3605 }
3606 else
3607 {
3608 if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
3609 || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)
3610 || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
3611 || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
3612 {
3613 return HAL_BUSY;
3614 }
3615 else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
3616 && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY)
3617 && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
3618 && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
3619 {
3620 if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U))
3621 {
3622 return HAL_ERROR;
3623 }
3624 else
3625 {
3626 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3627 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3628 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
3629 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
3630 }
3631 }
3632 else
3633 {
3634 return HAL_ERROR;
3635 }
3636 }
3637
3638 switch (Channel)
3639 {
3640 case TIM_CHANNEL_1:
3641 {
3642 /* Set the DMA capture callbacks */
3643 htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
3644 htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
3645
3646 /* Set the DMA error callback */
3647 htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
3648
3649 /* Enable the DMA channel */
3650 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1,
3651 Length) != HAL_OK)
3652 {
3653 /* Return error status */
3654 return HAL_ERROR;
3655 }
3656 /* Enable the TIM Input Capture DMA request */
3657 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
3658
3659 /* Enable the Capture compare channel */
3660 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
3661
3662 /* Enable the Peripheral */
3663 __HAL_TIM_ENABLE(htim);
3664
3665 break;
3666 }
3667
3668 case TIM_CHANNEL_2:
3669 {
3670 /* Set the DMA capture callbacks */
3671 htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
3672 htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
3673
3674 /* Set the DMA error callback */
3675 htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
3676 /* Enable the DMA channel */
3677 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2,
3678 Length) != HAL_OK)
3679 {
3680 /* Return error status */
3681 return HAL_ERROR;
3682 }
3683 /* Enable the TIM Input Capture DMA request */
3684 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
3685
3686 /* Enable the Capture compare channel */
3687 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
3688
3689 /* Enable the Peripheral */
3690 __HAL_TIM_ENABLE(htim);
3691
3692 break;
3693 }
3694
3695 default:
3696 {
3697 /* Set the DMA capture callbacks */
3698 htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
3699 htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
3700
3701 /* Set the DMA error callback */
3702 htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
3703
3704 /* Enable the DMA channel */
3705 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1,
3706 Length) != HAL_OK)
3707 {
3708 /* Return error status */
3709 return HAL_ERROR;
3710 }
3711
3712 /* Set the DMA capture callbacks */
3713 htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
3714 htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
3715
3716 /* Set the DMA error callback */
3717 htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
3718
3719 /* Enable the DMA channel */
3720 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2,
3721 Length) != HAL_OK)
3722 {
3723 /* Return error status */
3724 return HAL_ERROR;
3725 }
3726
3727 /* Enable the TIM Input Capture DMA request */
3728 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
3729 /* Enable the TIM Input Capture DMA request */
3730 __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
3731
3732 /* Enable the Capture compare channel */
3733 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
3734 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
3735
3736 /* Enable the Peripheral */
3737 __HAL_TIM_ENABLE(htim);
3738
3739 break;
3740 }
3741 }
3742
3743 /* Return function status */
3744 return HAL_OK;
3745 }
3746
3747 /**
3748 * @brief Stops the TIM Encoder Interface in DMA mode.
3749 * @param htim TIM Encoder Interface handle
3750 * @param Channel TIM Channels to be enabled
3751 * This parameter can be one of the following values:
3752 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
3753 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
3754 * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
3755 * @retval HAL status
3756 */
HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef * htim,uint32_t Channel)3757 HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
3758 {
3759 /* Check the parameters */
3760 assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
3761
3762 /* Disable the Input Capture channels 1 and 2
3763 (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
3764 if (Channel == TIM_CHANNEL_1)
3765 {
3766 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
3767
3768 /* Disable the capture compare DMA Request 1 */
3769 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
3770 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
3771 }
3772 else if (Channel == TIM_CHANNEL_2)
3773 {
3774 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
3775
3776 /* Disable the capture compare DMA Request 2 */
3777 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
3778 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
3779 }
3780 else
3781 {
3782 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
3783 TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
3784
3785 /* Disable the capture compare DMA Request 1 and 2 */
3786 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
3787 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
3788 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
3789 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
3790 }
3791
3792 /* Disable the Peripheral */
3793 __HAL_TIM_DISABLE(htim);
3794
3795 /* Set the TIM channel(s) state */
3796 if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2))
3797 {
3798 TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
3799 TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
3800 }
3801 else
3802 {
3803 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
3804 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
3805 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
3806 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
3807 }
3808
3809 /* Return function status */
3810 return HAL_OK;
3811 }
3812
3813 /**
3814 * @}
3815 */
3816 /** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
3817 * @brief TIM IRQ handler management
3818 *
3819 @verbatim
3820 ==============================================================================
3821 ##### IRQ handler management #####
3822 ==============================================================================
3823 [..]
3824 This section provides Timer IRQ handler function.
3825
3826 @endverbatim
3827 * @{
3828 */
3829 /**
3830 * @brief This function handles TIM interrupts requests.
3831 * @param htim TIM handle
3832 * @retval None
3833 */
HAL_TIM_IRQHandler(TIM_HandleTypeDef * htim)3834 void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
3835 {
3836 uint32_t itsource = htim->Instance->DIER;
3837 uint32_t itflag = htim->Instance->SR;
3838
3839 /* Capture compare 1 event */
3840 if ((itflag & (TIM_FLAG_CC1)) == (TIM_FLAG_CC1))
3841 {
3842 if ((itsource & (TIM_IT_CC1)) == (TIM_IT_CC1))
3843 {
3844 {
3845 __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1);
3846 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
3847
3848 /* Input capture event */
3849 if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U)
3850 {
3851 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3852 htim->IC_CaptureCallback(htim);
3853 #else
3854 HAL_TIM_IC_CaptureCallback(htim);
3855 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3856 }
3857 /* Output compare event */
3858 else
3859 {
3860 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3861 htim->OC_DelayElapsedCallback(htim);
3862 htim->PWM_PulseFinishedCallback(htim);
3863 #else
3864 HAL_TIM_OC_DelayElapsedCallback(htim);
3865 HAL_TIM_PWM_PulseFinishedCallback(htim);
3866 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3867 }
3868 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
3869 }
3870 }
3871 }
3872 /* Capture compare 2 event */
3873 if ((itflag & (TIM_FLAG_CC2)) == (TIM_FLAG_CC2))
3874 {
3875 if ((itsource & (TIM_IT_CC2)) == (TIM_IT_CC2))
3876 {
3877 __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2);
3878 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
3879 /* Input capture event */
3880 if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U)
3881 {
3882 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3883 htim->IC_CaptureCallback(htim);
3884 #else
3885 HAL_TIM_IC_CaptureCallback(htim);
3886 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3887 }
3888 /* Output compare event */
3889 else
3890 {
3891 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3892 htim->OC_DelayElapsedCallback(htim);
3893 htim->PWM_PulseFinishedCallback(htim);
3894 #else
3895 HAL_TIM_OC_DelayElapsedCallback(htim);
3896 HAL_TIM_PWM_PulseFinishedCallback(htim);
3897 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3898 }
3899 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
3900 }
3901 }
3902 /* Capture compare 3 event */
3903 if ((itflag & (TIM_FLAG_CC3)) == (TIM_FLAG_CC3))
3904 {
3905 if ((itsource & (TIM_IT_CC3)) == (TIM_IT_CC3))
3906 {
3907 __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3);
3908 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
3909 /* Input capture event */
3910 if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U)
3911 {
3912 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3913 htim->IC_CaptureCallback(htim);
3914 #else
3915 HAL_TIM_IC_CaptureCallback(htim);
3916 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3917 }
3918 /* Output compare event */
3919 else
3920 {
3921 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3922 htim->OC_DelayElapsedCallback(htim);
3923 htim->PWM_PulseFinishedCallback(htim);
3924 #else
3925 HAL_TIM_OC_DelayElapsedCallback(htim);
3926 HAL_TIM_PWM_PulseFinishedCallback(htim);
3927 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3928 }
3929 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
3930 }
3931 }
3932 /* Capture compare 4 event */
3933 if ((itflag & (TIM_FLAG_CC4)) == (TIM_FLAG_CC4))
3934 {
3935 if ((itsource & (TIM_IT_CC4)) == (TIM_IT_CC4))
3936 {
3937 __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4);
3938 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
3939 /* Input capture event */
3940 if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U)
3941 {
3942 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3943 htim->IC_CaptureCallback(htim);
3944 #else
3945 HAL_TIM_IC_CaptureCallback(htim);
3946 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3947 }
3948 /* Output compare event */
3949 else
3950 {
3951 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3952 htim->OC_DelayElapsedCallback(htim);
3953 htim->PWM_PulseFinishedCallback(htim);
3954 #else
3955 HAL_TIM_OC_DelayElapsedCallback(htim);
3956 HAL_TIM_PWM_PulseFinishedCallback(htim);
3957 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3958 }
3959 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
3960 }
3961 }
3962 /* TIM Update event */
3963 if ((itflag & (TIM_FLAG_UPDATE)) == (TIM_FLAG_UPDATE))
3964 {
3965 if ((itsource & (TIM_IT_UPDATE)) == (TIM_IT_UPDATE))
3966 {
3967 __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE);
3968 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3969 htim->PeriodElapsedCallback(htim);
3970 #else
3971 HAL_TIM_PeriodElapsedCallback(htim);
3972 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3973 }
3974 }
3975 /* TIM Break input event */
3976 if (((itflag & (TIM_FLAG_BREAK)) == (TIM_FLAG_BREAK)) || \
3977 ((itflag & (TIM_FLAG_SYSTEM_BREAK)) == (TIM_FLAG_SYSTEM_BREAK)))
3978 {
3979 if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK))
3980 {
3981 __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK | TIM_FLAG_SYSTEM_BREAK);
3982 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3983 htim->BreakCallback(htim);
3984 #else
3985 HAL_TIMEx_BreakCallback(htim);
3986 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
3987 }
3988 }
3989 /* TIM Break2 input event */
3990 if ((itflag & (TIM_FLAG_BREAK2)) == (TIM_FLAG_BREAK2))
3991 {
3992 if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK))
3993 {
3994 __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2);
3995 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
3996 htim->Break2Callback(htim);
3997 #else
3998 HAL_TIMEx_Break2Callback(htim);
3999 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
4000 }
4001 }
4002 /* TIM Trigger detection event */
4003 if ((itflag & (TIM_FLAG_TRIGGER)) == (TIM_FLAG_TRIGGER))
4004 {
4005 if ((itsource & (TIM_IT_TRIGGER)) == (TIM_IT_TRIGGER))
4006 {
4007 __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER);
4008 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
4009 htim->TriggerCallback(htim);
4010 #else
4011 HAL_TIM_TriggerCallback(htim);
4012 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
4013 }
4014 }
4015 /* TIM commutation event */
4016 if ((itflag & (TIM_FLAG_COM)) == (TIM_FLAG_COM))
4017 {
4018 if ((itsource & (TIM_IT_COM)) == (TIM_IT_COM))
4019 {
4020 __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM);
4021 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
4022 htim->CommutationCallback(htim);
4023 #else
4024 HAL_TIMEx_CommutCallback(htim);
4025 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
4026 }
4027 }
4028 }
4029
4030 /**
4031 * @}
4032 */
4033
4034 /** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions
4035 * @brief TIM Peripheral Control functions
4036 *
4037 @verbatim
4038 ==============================================================================
4039 ##### Peripheral Control functions #####
4040 ==============================================================================
4041 [..]
4042 This section provides functions allowing to:
4043 (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
4044 (+) Configure External Clock source.
4045 (+) Configure Complementary channels, break features and dead time.
4046 (+) Configure Master and the Slave synchronization.
4047 (+) Configure the DMA Burst Mode.
4048
4049 @endverbatim
4050 * @{
4051 */
4052
4053 /**
4054 * @brief Initializes the TIM Output Compare Channels according to the specified
4055 * parameters in the TIM_OC_InitTypeDef.
4056 * @param htim TIM Output Compare handle
4057 * @param sConfig TIM Output Compare configuration structure
4058 * @param Channel TIM Channels to configure
4059 * This parameter can be one of the following values:
4060 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
4061 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
4062 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
4063 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
4064 * @arg TIM_CHANNEL_5: TIM Channel 5 selected
4065 * @arg TIM_CHANNEL_6: TIM Channel 6 selected
4066 * @retval HAL status
4067 */
HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef * htim,const TIM_OC_InitTypeDef * sConfig,uint32_t Channel)4068 HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim,
4069 const TIM_OC_InitTypeDef *sConfig,
4070 uint32_t Channel)
4071 {
4072 HAL_StatusTypeDef status = HAL_OK;
4073
4074 /* Check the parameters */
4075 assert_param(IS_TIM_CHANNELS(Channel));
4076 assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
4077 assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
4078
4079 /* Process Locked */
4080 __HAL_LOCK(htim);
4081
4082 switch (Channel)
4083 {
4084 case TIM_CHANNEL_1:
4085 {
4086 /* Check the parameters */
4087 assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
4088
4089 /* Configure the TIM Channel 1 in Output Compare */
4090 TIM_OC1_SetConfig(htim->Instance, sConfig);
4091 break;
4092 }
4093
4094 case TIM_CHANNEL_2:
4095 {
4096 /* Check the parameters */
4097 assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
4098
4099 /* Configure the TIM Channel 2 in Output Compare */
4100 TIM_OC2_SetConfig(htim->Instance, sConfig);
4101 break;
4102 }
4103
4104 case TIM_CHANNEL_3:
4105 {
4106 /* Check the parameters */
4107 assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
4108
4109 /* Configure the TIM Channel 3 in Output Compare */
4110 TIM_OC3_SetConfig(htim->Instance, sConfig);
4111 break;
4112 }
4113
4114 case TIM_CHANNEL_4:
4115 {
4116 /* Check the parameters */
4117 assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
4118
4119 /* Configure the TIM Channel 4 in Output Compare */
4120 TIM_OC4_SetConfig(htim->Instance, sConfig);
4121 break;
4122 }
4123
4124 case TIM_CHANNEL_5:
4125 {
4126 /* Check the parameters */
4127 assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
4128
4129 /* Configure the TIM Channel 5 in Output Compare */
4130 TIM_OC5_SetConfig(htim->Instance, sConfig);
4131 break;
4132 }
4133
4134 case TIM_CHANNEL_6:
4135 {
4136 /* Check the parameters */
4137 assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
4138
4139 /* Configure the TIM Channel 6 in Output Compare */
4140 TIM_OC6_SetConfig(htim->Instance, sConfig);
4141 break;
4142 }
4143
4144 default:
4145 status = HAL_ERROR;
4146 break;
4147 }
4148
4149 __HAL_UNLOCK(htim);
4150
4151 return status;
4152 }
4153
4154 /**
4155 * @brief Initializes the TIM Input Capture Channels according to the specified
4156 * parameters in the TIM_IC_InitTypeDef.
4157 * @param htim TIM IC handle
4158 * @param sConfig TIM Input Capture configuration structure
4159 * @param Channel TIM Channel to configure
4160 * This parameter can be one of the following values:
4161 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
4162 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
4163 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
4164 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
4165 * @retval HAL status
4166 */
HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef * htim,const TIM_IC_InitTypeDef * sConfig,uint32_t Channel)4167 HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel)
4168 {
4169 HAL_StatusTypeDef status = HAL_OK;
4170
4171 /* Check the parameters */
4172 assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
4173 assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
4174 assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
4175 assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
4176 assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
4177
4178 /* Process Locked */
4179 __HAL_LOCK(htim);
4180
4181 if (Channel == TIM_CHANNEL_1)
4182 {
4183 /* TI1 Configuration */
4184 TIM_TI1_SetConfig(htim->Instance,
4185 sConfig->ICPolarity,
4186 sConfig->ICSelection,
4187 sConfig->ICFilter);
4188
4189 /* Reset the IC1PSC Bits */
4190 htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
4191
4192 /* Set the IC1PSC value */
4193 htim->Instance->CCMR1 |= sConfig->ICPrescaler;
4194 }
4195 else if (Channel == TIM_CHANNEL_2)
4196 {
4197 /* TI2 Configuration */
4198 assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
4199
4200 TIM_TI2_SetConfig(htim->Instance,
4201 sConfig->ICPolarity,
4202 sConfig->ICSelection,
4203 sConfig->ICFilter);
4204
4205 /* Reset the IC2PSC Bits */
4206 htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
4207
4208 /* Set the IC2PSC value */
4209 htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U);
4210 }
4211 else if (Channel == TIM_CHANNEL_3)
4212 {
4213 /* TI3 Configuration */
4214 assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
4215
4216 TIM_TI3_SetConfig(htim->Instance,
4217 sConfig->ICPolarity,
4218 sConfig->ICSelection,
4219 sConfig->ICFilter);
4220
4221 /* Reset the IC3PSC Bits */
4222 htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
4223
4224 /* Set the IC3PSC value */
4225 htim->Instance->CCMR2 |= sConfig->ICPrescaler;
4226 }
4227 else if (Channel == TIM_CHANNEL_4)
4228 {
4229 /* TI4 Configuration */
4230 assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
4231
4232 TIM_TI4_SetConfig(htim->Instance,
4233 sConfig->ICPolarity,
4234 sConfig->ICSelection,
4235 sConfig->ICFilter);
4236
4237 /* Reset the IC4PSC Bits */
4238 htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
4239
4240 /* Set the IC4PSC value */
4241 htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U);
4242 }
4243 else
4244 {
4245 status = HAL_ERROR;
4246 }
4247
4248 __HAL_UNLOCK(htim);
4249
4250 return status;
4251 }
4252
4253 /**
4254 * @brief Initializes the TIM PWM channels according to the specified
4255 * parameters in the TIM_OC_InitTypeDef.
4256 * @param htim TIM PWM handle
4257 * @param sConfig TIM PWM configuration structure
4258 * @param Channel TIM Channels to be configured
4259 * This parameter can be one of the following values:
4260 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
4261 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
4262 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
4263 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
4264 * @arg TIM_CHANNEL_5: TIM Channel 5 selected
4265 * @arg TIM_CHANNEL_6: TIM Channel 6 selected
4266 * @retval HAL status
4267 */
HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef * htim,const TIM_OC_InitTypeDef * sConfig,uint32_t Channel)4268 HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim,
4269 const TIM_OC_InitTypeDef *sConfig,
4270 uint32_t Channel)
4271 {
4272 HAL_StatusTypeDef status = HAL_OK;
4273
4274 /* Check the parameters */
4275 assert_param(IS_TIM_CHANNELS(Channel));
4276 assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
4277 assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
4278 assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
4279
4280 /* Process Locked */
4281 __HAL_LOCK(htim);
4282
4283 switch (Channel)
4284 {
4285 case TIM_CHANNEL_1:
4286 {
4287 /* Check the parameters */
4288 assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
4289
4290 /* Configure the Channel 1 in PWM mode */
4291 TIM_OC1_SetConfig(htim->Instance, sConfig);
4292
4293 /* Set the Preload enable bit for channel1 */
4294 htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
4295
4296 /* Configure the Output Fast mode */
4297 htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
4298 htim->Instance->CCMR1 |= sConfig->OCFastMode;
4299 break;
4300 }
4301
4302 case TIM_CHANNEL_2:
4303 {
4304 /* Check the parameters */
4305 assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
4306
4307 /* Configure the Channel 2 in PWM mode */
4308 TIM_OC2_SetConfig(htim->Instance, sConfig);
4309
4310 /* Set the Preload enable bit for channel2 */
4311 htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
4312
4313 /* Configure the Output Fast mode */
4314 htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
4315 htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U;
4316 break;
4317 }
4318
4319 case TIM_CHANNEL_3:
4320 {
4321 /* Check the parameters */
4322 assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
4323
4324 /* Configure the Channel 3 in PWM mode */
4325 TIM_OC3_SetConfig(htim->Instance, sConfig);
4326
4327 /* Set the Preload enable bit for channel3 */
4328 htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
4329
4330 /* Configure the Output Fast mode */
4331 htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
4332 htim->Instance->CCMR2 |= sConfig->OCFastMode;
4333 break;
4334 }
4335
4336 case TIM_CHANNEL_4:
4337 {
4338 /* Check the parameters */
4339 assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
4340
4341 /* Configure the Channel 4 in PWM mode */
4342 TIM_OC4_SetConfig(htim->Instance, sConfig);
4343
4344 /* Set the Preload enable bit for channel4 */
4345 htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
4346
4347 /* Configure the Output Fast mode */
4348 htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
4349 htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U;
4350 break;
4351 }
4352
4353 case TIM_CHANNEL_5:
4354 {
4355 /* Check the parameters */
4356 assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
4357
4358 /* Configure the Channel 5 in PWM mode */
4359 TIM_OC5_SetConfig(htim->Instance, sConfig);
4360
4361 /* Set the Preload enable bit for channel5*/
4362 htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE;
4363
4364 /* Configure the Output Fast mode */
4365 htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE;
4366 htim->Instance->CCMR3 |= sConfig->OCFastMode;
4367 break;
4368 }
4369
4370 case TIM_CHANNEL_6:
4371 {
4372 /* Check the parameters */
4373 assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
4374
4375 /* Configure the Channel 6 in PWM mode */
4376 TIM_OC6_SetConfig(htim->Instance, sConfig);
4377
4378 /* Set the Preload enable bit for channel6 */
4379 htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE;
4380
4381 /* Configure the Output Fast mode */
4382 htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE;
4383 htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U;
4384 break;
4385 }
4386
4387 default:
4388 status = HAL_ERROR;
4389 break;
4390 }
4391
4392 __HAL_UNLOCK(htim);
4393
4394 return status;
4395 }
4396
4397 /**
4398 * @brief Initializes the TIM One Pulse Channels according to the specified
4399 * parameters in the TIM_OnePulse_InitTypeDef.
4400 * @param htim TIM One Pulse handle
4401 * @param sConfig TIM One Pulse configuration structure
4402 * @param OutputChannel TIM output channel to configure
4403 * This parameter can be one of the following values:
4404 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
4405 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
4406 * @param InputChannel TIM input Channel to configure
4407 * This parameter can be one of the following values:
4408 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
4409 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
4410 * @note To output a waveform with a minimum delay user can enable the fast
4411 * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx
4412 * output is forced in response to the edge detection on TIx input,
4413 * without taking in account the comparison.
4414 * @retval HAL status
4415 */
HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef * htim,TIM_OnePulse_InitTypeDef * sConfig,uint32_t OutputChannel,uint32_t InputChannel)4416 HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig,
4417 uint32_t OutputChannel, uint32_t InputChannel)
4418 {
4419 HAL_StatusTypeDef status = HAL_OK;
4420 TIM_OC_InitTypeDef temp1;
4421
4422 /* Check the parameters */
4423 assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
4424 assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
4425
4426 if (OutputChannel != InputChannel)
4427 {
4428 /* Process Locked */
4429 __HAL_LOCK(htim);
4430
4431 htim->State = HAL_TIM_STATE_BUSY;
4432
4433 /* Extract the Output compare configuration from sConfig structure */
4434 temp1.OCMode = sConfig->OCMode;
4435 temp1.Pulse = sConfig->Pulse;
4436 temp1.OCPolarity = sConfig->OCPolarity;
4437 temp1.OCNPolarity = sConfig->OCNPolarity;
4438 temp1.OCIdleState = sConfig->OCIdleState;
4439 temp1.OCNIdleState = sConfig->OCNIdleState;
4440
4441 switch (OutputChannel)
4442 {
4443 case TIM_CHANNEL_1:
4444 {
4445 assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
4446
4447 TIM_OC1_SetConfig(htim->Instance, &temp1);
4448 break;
4449 }
4450
4451 case TIM_CHANNEL_2:
4452 {
4453 assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
4454
4455 TIM_OC2_SetConfig(htim->Instance, &temp1);
4456 break;
4457 }
4458
4459 default:
4460 status = HAL_ERROR;
4461 break;
4462 }
4463
4464 if (status == HAL_OK)
4465 {
4466 switch (InputChannel)
4467 {
4468 case TIM_CHANNEL_1:
4469 {
4470 assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
4471
4472 TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
4473 sConfig->ICSelection, sConfig->ICFilter);
4474
4475 /* Reset the IC1PSC Bits */
4476 htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
4477
4478 /* Select the Trigger source */
4479 htim->Instance->SMCR &= ~TIM_SMCR_TS;
4480 htim->Instance->SMCR |= TIM_TS_TI1FP1;
4481
4482 /* Select the Slave Mode */
4483 htim->Instance->SMCR &= ~TIM_SMCR_SMS;
4484 htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
4485 break;
4486 }
4487
4488 case TIM_CHANNEL_2:
4489 {
4490 assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
4491
4492 TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
4493 sConfig->ICSelection, sConfig->ICFilter);
4494
4495 /* Reset the IC2PSC Bits */
4496 htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
4497
4498 /* Select the Trigger source */
4499 htim->Instance->SMCR &= ~TIM_SMCR_TS;
4500 htim->Instance->SMCR |= TIM_TS_TI2FP2;
4501
4502 /* Select the Slave Mode */
4503 htim->Instance->SMCR &= ~TIM_SMCR_SMS;
4504 htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
4505 break;
4506 }
4507
4508 default:
4509 status = HAL_ERROR;
4510 break;
4511 }
4512 }
4513
4514 htim->State = HAL_TIM_STATE_READY;
4515
4516 __HAL_UNLOCK(htim);
4517
4518 return status;
4519 }
4520 else
4521 {
4522 return HAL_ERROR;
4523 }
4524 }
4525
4526 /**
4527 * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
4528 * @param htim TIM handle
4529 * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write
4530 * This parameter can be one of the following values:
4531 * @arg TIM_DMABASE_CR1
4532 * @arg TIM_DMABASE_CR2
4533 * @arg TIM_DMABASE_SMCR
4534 * @arg TIM_DMABASE_DIER
4535 * @arg TIM_DMABASE_SR
4536 * @arg TIM_DMABASE_EGR
4537 * @arg TIM_DMABASE_CCMR1
4538 * @arg TIM_DMABASE_CCMR2
4539 * @arg TIM_DMABASE_CCER
4540 * @arg TIM_DMABASE_CNT
4541 * @arg TIM_DMABASE_PSC
4542 * @arg TIM_DMABASE_ARR
4543 * @arg TIM_DMABASE_RCR
4544 * @arg TIM_DMABASE_CCR1
4545 * @arg TIM_DMABASE_CCR2
4546 * @arg TIM_DMABASE_CCR3
4547 * @arg TIM_DMABASE_CCR4
4548 * @arg TIM_DMABASE_BDTR
4549 * @arg TIM_DMABASE_OR1
4550 * @arg TIM_DMABASE_CCMR3
4551 * @arg TIM_DMABASE_CCR5
4552 * @arg TIM_DMABASE_CCR6
4553 * @arg TIM_DMABASE_OR2
4554 * @arg TIM_DMABASE_OR3
4555 * @param BurstRequestSrc TIM DMA Request sources
4556 * This parameter can be one of the following values:
4557 * @arg TIM_DMA_UPDATE: TIM update Interrupt source
4558 * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
4559 * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
4560 * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
4561 * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
4562 * @arg TIM_DMA_COM: TIM Commutation DMA source
4563 * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
4564 * @param BurstBuffer The Buffer address.
4565 * @param BurstLength DMA Burst length. This parameter can be one value
4566 * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
4567 * @note This function should be used only when BurstLength is equal to DMA data transfer length.
4568 * @retval HAL status
4569 */
HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef * htim,uint32_t BurstBaseAddress,uint32_t BurstRequestSrc,const uint32_t * BurstBuffer,uint32_t BurstLength)4570 HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
4571 uint32_t BurstRequestSrc, const uint32_t *BurstBuffer,
4572 uint32_t BurstLength)
4573 {
4574 HAL_StatusTypeDef status;
4575
4576 status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength,
4577 ((BurstLength) >> 8U) + 1U);
4578
4579
4580
4581 return status;
4582 }
4583
4584 /**
4585 * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral
4586 * @param htim TIM handle
4587 * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write
4588 * This parameter can be one of the following values:
4589 * @arg TIM_DMABASE_CR1
4590 * @arg TIM_DMABASE_CR2
4591 * @arg TIM_DMABASE_SMCR
4592 * @arg TIM_DMABASE_DIER
4593 * @arg TIM_DMABASE_SR
4594 * @arg TIM_DMABASE_EGR
4595 * @arg TIM_DMABASE_CCMR1
4596 * @arg TIM_DMABASE_CCMR2
4597 * @arg TIM_DMABASE_CCER
4598 * @arg TIM_DMABASE_CNT
4599 * @arg TIM_DMABASE_PSC
4600 * @arg TIM_DMABASE_ARR
4601 * @arg TIM_DMABASE_RCR
4602 * @arg TIM_DMABASE_CCR1
4603 * @arg TIM_DMABASE_CCR2
4604 * @arg TIM_DMABASE_CCR3
4605 * @arg TIM_DMABASE_CCR4
4606 * @arg TIM_DMABASE_BDTR
4607 * @arg TIM_DMABASE_OR1
4608 * @arg TIM_DMABASE_CCMR3
4609 * @arg TIM_DMABASE_CCR5
4610 * @arg TIM_DMABASE_CCR6
4611 * @arg TIM_DMABASE_OR2
4612 * @arg TIM_DMABASE_OR3
4613 * @param BurstRequestSrc TIM DMA Request sources
4614 * This parameter can be one of the following values:
4615 * @arg TIM_DMA_UPDATE: TIM update Interrupt source
4616 * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
4617 * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
4618 * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
4619 * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
4620 * @arg TIM_DMA_COM: TIM Commutation DMA source
4621 * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
4622 * @param BurstBuffer The Buffer address.
4623 * @param BurstLength DMA Burst length. This parameter can be one value
4624 * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
4625 * @param DataLength Data length. This parameter can be one value
4626 * between 1 and 0xFFFF.
4627 * @retval HAL status
4628 */
HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef * htim,uint32_t BurstBaseAddress,uint32_t BurstRequestSrc,const uint32_t * BurstBuffer,uint32_t BurstLength,uint32_t DataLength)4629 HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
4630 uint32_t BurstRequestSrc, const uint32_t *BurstBuffer,
4631 uint32_t BurstLength, uint32_t DataLength)
4632 {
4633 HAL_StatusTypeDef status = HAL_OK;
4634
4635 /* Check the parameters */
4636 assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
4637 assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
4638 assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
4639 assert_param(IS_TIM_DMA_LENGTH(BurstLength));
4640 assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
4641
4642 if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY)
4643 {
4644 return HAL_BUSY;
4645 }
4646 else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY)
4647 {
4648 if ((BurstBuffer == NULL) && (BurstLength > 0U))
4649 {
4650 return HAL_ERROR;
4651 }
4652 else
4653 {
4654 htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY;
4655 }
4656 }
4657 else
4658 {
4659 /* nothing to do */
4660 }
4661
4662 switch (BurstRequestSrc)
4663 {
4664 case TIM_DMA_UPDATE:
4665 {
4666 /* Set the DMA Period elapsed callbacks */
4667 htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
4668 htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt;
4669
4670 /* Set the DMA error callback */
4671 htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
4672
4673 /* Enable the DMA channel */
4674 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer,
4675 (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
4676 {
4677 /* Return error status */
4678 return HAL_ERROR;
4679 }
4680 break;
4681 }
4682 case TIM_DMA_CC1:
4683 {
4684 /* Set the DMA compare callbacks */
4685 htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
4686 htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
4687
4688 /* Set the DMA error callback */
4689 htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
4690
4691 /* Enable the DMA channel */
4692 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer,
4693 (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
4694 {
4695 /* Return error status */
4696 return HAL_ERROR;
4697 }
4698 break;
4699 }
4700 case TIM_DMA_CC2:
4701 {
4702 /* Set the DMA compare callbacks */
4703 htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
4704 htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
4705
4706 /* Set the DMA error callback */
4707 htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
4708
4709 /* Enable the DMA channel */
4710 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer,
4711 (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
4712 {
4713 /* Return error status */
4714 return HAL_ERROR;
4715 }
4716 break;
4717 }
4718 case TIM_DMA_CC3:
4719 {
4720 /* Set the DMA compare callbacks */
4721 htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
4722 htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
4723
4724 /* Set the DMA error callback */
4725 htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
4726
4727 /* Enable the DMA channel */
4728 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer,
4729 (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
4730 {
4731 /* Return error status */
4732 return HAL_ERROR;
4733 }
4734 break;
4735 }
4736 case TIM_DMA_CC4:
4737 {
4738 /* Set the DMA compare callbacks */
4739 htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
4740 htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
4741
4742 /* Set the DMA error callback */
4743 htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
4744
4745 /* Enable the DMA channel */
4746 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer,
4747 (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
4748 {
4749 /* Return error status */
4750 return HAL_ERROR;
4751 }
4752 break;
4753 }
4754 case TIM_DMA_COM:
4755 {
4756 /* Set the DMA commutation callbacks */
4757 htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
4758 htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt;
4759
4760 /* Set the DMA error callback */
4761 htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
4762
4763 /* Enable the DMA channel */
4764 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer,
4765 (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
4766 {
4767 /* Return error status */
4768 return HAL_ERROR;
4769 }
4770 break;
4771 }
4772 case TIM_DMA_TRIGGER:
4773 {
4774 /* Set the DMA trigger callbacks */
4775 htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
4776 htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt;
4777
4778 /* Set the DMA error callback */
4779 htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
4780
4781 /* Enable the DMA channel */
4782 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer,
4783 (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
4784 {
4785 /* Return error status */
4786 return HAL_ERROR;
4787 }
4788 break;
4789 }
4790 default:
4791 status = HAL_ERROR;
4792 break;
4793 }
4794
4795 if (status == HAL_OK)
4796 {
4797 /* Configure the DMA Burst Mode */
4798 htim->Instance->DCR = (BurstBaseAddress | BurstLength);
4799 /* Enable the TIM DMA Request */
4800 __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
4801 }
4802
4803 /* Return function status */
4804 return status;
4805 }
4806
4807 /**
4808 * @brief Stops the TIM DMA Burst mode
4809 * @param htim TIM handle
4810 * @param BurstRequestSrc TIM DMA Request sources to disable
4811 * @retval HAL status
4812 */
HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef * htim,uint32_t BurstRequestSrc)4813 HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
4814 {
4815 HAL_StatusTypeDef status = HAL_OK;
4816
4817 /* Check the parameters */
4818 assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
4819
4820 /* Abort the DMA transfer (at least disable the DMA channel) */
4821 switch (BurstRequestSrc)
4822 {
4823 case TIM_DMA_UPDATE:
4824 {
4825 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]);
4826 break;
4827 }
4828 case TIM_DMA_CC1:
4829 {
4830 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
4831 break;
4832 }
4833 case TIM_DMA_CC2:
4834 {
4835 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
4836 break;
4837 }
4838 case TIM_DMA_CC3:
4839 {
4840 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
4841 break;
4842 }
4843 case TIM_DMA_CC4:
4844 {
4845 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
4846 break;
4847 }
4848 case TIM_DMA_COM:
4849 {
4850 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]);
4851 break;
4852 }
4853 case TIM_DMA_TRIGGER:
4854 {
4855 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]);
4856 break;
4857 }
4858 default:
4859 status = HAL_ERROR;
4860 break;
4861 }
4862
4863 if (status == HAL_OK)
4864 {
4865 /* Disable the TIM Update DMA request */
4866 __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
4867
4868 /* Change the DMA burst operation state */
4869 htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
4870 }
4871
4872 /* Return function status */
4873 return status;
4874 }
4875
4876 /**
4877 * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
4878 * @param htim TIM handle
4879 * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read
4880 * This parameter can be one of the following values:
4881 * @arg TIM_DMABASE_CR1
4882 * @arg TIM_DMABASE_CR2
4883 * @arg TIM_DMABASE_SMCR
4884 * @arg TIM_DMABASE_DIER
4885 * @arg TIM_DMABASE_SR
4886 * @arg TIM_DMABASE_EGR
4887 * @arg TIM_DMABASE_CCMR1
4888 * @arg TIM_DMABASE_CCMR2
4889 * @arg TIM_DMABASE_CCER
4890 * @arg TIM_DMABASE_CNT
4891 * @arg TIM_DMABASE_PSC
4892 * @arg TIM_DMABASE_ARR
4893 * @arg TIM_DMABASE_RCR
4894 * @arg TIM_DMABASE_CCR1
4895 * @arg TIM_DMABASE_CCR2
4896 * @arg TIM_DMABASE_CCR3
4897 * @arg TIM_DMABASE_CCR4
4898 * @arg TIM_DMABASE_BDTR
4899 * @arg TIM_DMABASE_OR1
4900 * @arg TIM_DMABASE_CCMR3
4901 * @arg TIM_DMABASE_CCR5
4902 * @arg TIM_DMABASE_CCR6
4903 * @arg TIM_DMABASE_OR2
4904 * @arg TIM_DMABASE_OR3
4905 * @param BurstRequestSrc TIM DMA Request sources
4906 * This parameter can be one of the following values:
4907 * @arg TIM_DMA_UPDATE: TIM update Interrupt source
4908 * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
4909 * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
4910 * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
4911 * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
4912 * @arg TIM_DMA_COM: TIM Commutation DMA source
4913 * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
4914 * @param BurstBuffer The Buffer address.
4915 * @param BurstLength DMA Burst length. This parameter can be one value
4916 * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
4917 * @note This function should be used only when BurstLength is equal to DMA data transfer length.
4918 * @retval HAL status
4919 */
HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef * htim,uint32_t BurstBaseAddress,uint32_t BurstRequestSrc,uint32_t * BurstBuffer,uint32_t BurstLength)4920 HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
4921 uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength)
4922 {
4923 HAL_StatusTypeDef status;
4924
4925 status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength,
4926 ((BurstLength) >> 8U) + 1U);
4927
4928
4929 return status;
4930 }
4931
4932 /**
4933 * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
4934 * @param htim TIM handle
4935 * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read
4936 * This parameter can be one of the following values:
4937 * @arg TIM_DMABASE_CR1
4938 * @arg TIM_DMABASE_CR2
4939 * @arg TIM_DMABASE_SMCR
4940 * @arg TIM_DMABASE_DIER
4941 * @arg TIM_DMABASE_SR
4942 * @arg TIM_DMABASE_EGR
4943 * @arg TIM_DMABASE_CCMR1
4944 * @arg TIM_DMABASE_CCMR2
4945 * @arg TIM_DMABASE_CCER
4946 * @arg TIM_DMABASE_CNT
4947 * @arg TIM_DMABASE_PSC
4948 * @arg TIM_DMABASE_ARR
4949 * @arg TIM_DMABASE_RCR
4950 * @arg TIM_DMABASE_CCR1
4951 * @arg TIM_DMABASE_CCR2
4952 * @arg TIM_DMABASE_CCR3
4953 * @arg TIM_DMABASE_CCR4
4954 * @arg TIM_DMABASE_BDTR
4955 * @arg TIM_DMABASE_OR1
4956 * @arg TIM_DMABASE_CCMR3
4957 * @arg TIM_DMABASE_CCR5
4958 * @arg TIM_DMABASE_CCR6
4959 * @arg TIM_DMABASE_OR2
4960 * @arg TIM_DMABASE_OR3
4961 * @param BurstRequestSrc TIM DMA Request sources
4962 * This parameter can be one of the following values:
4963 * @arg TIM_DMA_UPDATE: TIM update Interrupt source
4964 * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
4965 * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
4966 * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
4967 * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
4968 * @arg TIM_DMA_COM: TIM Commutation DMA source
4969 * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
4970 * @param BurstBuffer The Buffer address.
4971 * @param BurstLength DMA Burst length. This parameter can be one value
4972 * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
4973 * @param DataLength Data length. This parameter can be one value
4974 * between 1 and 0xFFFF.
4975 * @retval HAL status
4976 */
HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef * htim,uint32_t BurstBaseAddress,uint32_t BurstRequestSrc,uint32_t * BurstBuffer,uint32_t BurstLength,uint32_t DataLength)4977 HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
4978 uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
4979 uint32_t BurstLength, uint32_t DataLength)
4980 {
4981 HAL_StatusTypeDef status = HAL_OK;
4982
4983 /* Check the parameters */
4984 assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
4985 assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
4986 assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
4987 assert_param(IS_TIM_DMA_LENGTH(BurstLength));
4988 assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
4989
4990 if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY)
4991 {
4992 return HAL_BUSY;
4993 }
4994 else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY)
4995 {
4996 if ((BurstBuffer == NULL) && (BurstLength > 0U))
4997 {
4998 return HAL_ERROR;
4999 }
5000 else
5001 {
5002 htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY;
5003 }
5004 }
5005 else
5006 {
5007 /* nothing to do */
5008 }
5009 switch (BurstRequestSrc)
5010 {
5011 case TIM_DMA_UPDATE:
5012 {
5013 /* Set the DMA Period elapsed callbacks */
5014 htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
5015 htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt;
5016
5017 /* Set the DMA error callback */
5018 htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
5019
5020 /* Enable the DMA channel */
5021 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
5022 DataLength) != HAL_OK)
5023 {
5024 /* Return error status */
5025 return HAL_ERROR;
5026 }
5027 break;
5028 }
5029 case TIM_DMA_CC1:
5030 {
5031 /* Set the DMA capture callbacks */
5032 htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
5033 htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
5034
5035 /* Set the DMA error callback */
5036 htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
5037
5038 /* Enable the DMA channel */
5039 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
5040 DataLength) != HAL_OK)
5041 {
5042 /* Return error status */
5043 return HAL_ERROR;
5044 }
5045 break;
5046 }
5047 case TIM_DMA_CC2:
5048 {
5049 /* Set the DMA capture callbacks */
5050 htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
5051 htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
5052
5053 /* Set the DMA error callback */
5054 htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
5055
5056 /* Enable the DMA channel */
5057 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
5058 DataLength) != HAL_OK)
5059 {
5060 /* Return error status */
5061 return HAL_ERROR;
5062 }
5063 break;
5064 }
5065 case TIM_DMA_CC3:
5066 {
5067 /* Set the DMA capture callbacks */
5068 htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
5069 htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
5070
5071 /* Set the DMA error callback */
5072 htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
5073
5074 /* Enable the DMA channel */
5075 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
5076 DataLength) != HAL_OK)
5077 {
5078 /* Return error status */
5079 return HAL_ERROR;
5080 }
5081 break;
5082 }
5083 case TIM_DMA_CC4:
5084 {
5085 /* Set the DMA capture callbacks */
5086 htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
5087 htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
5088
5089 /* Set the DMA error callback */
5090 htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
5091
5092 /* Enable the DMA channel */
5093 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
5094 DataLength) != HAL_OK)
5095 {
5096 /* Return error status */
5097 return HAL_ERROR;
5098 }
5099 break;
5100 }
5101 case TIM_DMA_COM:
5102 {
5103 /* Set the DMA commutation callbacks */
5104 htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
5105 htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt;
5106
5107 /* Set the DMA error callback */
5108 htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
5109
5110 /* Enable the DMA channel */
5111 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
5112 DataLength) != HAL_OK)
5113 {
5114 /* Return error status */
5115 return HAL_ERROR;
5116 }
5117 break;
5118 }
5119 case TIM_DMA_TRIGGER:
5120 {
5121 /* Set the DMA trigger callbacks */
5122 htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
5123 htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt;
5124
5125 /* Set the DMA error callback */
5126 htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
5127
5128 /* Enable the DMA channel */
5129 if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
5130 DataLength) != HAL_OK)
5131 {
5132 /* Return error status */
5133 return HAL_ERROR;
5134 }
5135 break;
5136 }
5137 default:
5138 status = HAL_ERROR;
5139 break;
5140 }
5141
5142 if (status == HAL_OK)
5143 {
5144 /* Configure the DMA Burst Mode */
5145 htim->Instance->DCR = (BurstBaseAddress | BurstLength);
5146
5147 /* Enable the TIM DMA Request */
5148 __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
5149 }
5150
5151 /* Return function status */
5152 return status;
5153 }
5154
5155 /**
5156 * @brief Stop the DMA burst reading
5157 * @param htim TIM handle
5158 * @param BurstRequestSrc TIM DMA Request sources to disable.
5159 * @retval HAL status
5160 */
HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef * htim,uint32_t BurstRequestSrc)5161 HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
5162 {
5163 HAL_StatusTypeDef status = HAL_OK;
5164
5165 /* Check the parameters */
5166 assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
5167
5168 /* Abort the DMA transfer (at least disable the DMA channel) */
5169 switch (BurstRequestSrc)
5170 {
5171 case TIM_DMA_UPDATE:
5172 {
5173 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]);
5174 break;
5175 }
5176 case TIM_DMA_CC1:
5177 {
5178 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
5179 break;
5180 }
5181 case TIM_DMA_CC2:
5182 {
5183 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
5184 break;
5185 }
5186 case TIM_DMA_CC3:
5187 {
5188 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
5189 break;
5190 }
5191 case TIM_DMA_CC4:
5192 {
5193 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
5194 break;
5195 }
5196 case TIM_DMA_COM:
5197 {
5198 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]);
5199 break;
5200 }
5201 case TIM_DMA_TRIGGER:
5202 {
5203 (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]);
5204 break;
5205 }
5206 default:
5207 status = HAL_ERROR;
5208 break;
5209 }
5210
5211 if (status == HAL_OK)
5212 {
5213 /* Disable the TIM Update DMA request */
5214 __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
5215
5216 /* Change the DMA burst operation state */
5217 htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
5218 }
5219
5220 /* Return function status */
5221 return status;
5222 }
5223
5224 /**
5225 * @brief Generate a software event
5226 * @param htim TIM handle
5227 * @param EventSource specifies the event source.
5228 * This parameter can be one of the following values:
5229 * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
5230 * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
5231 * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
5232 * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
5233 * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
5234 * @arg TIM_EVENTSOURCE_COM: Timer COM event source
5235 * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
5236 * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
5237 * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source
5238 * @note Basic timers can only generate an update event.
5239 * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances.
5240 * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant
5241 * only for timer instances supporting break input(s).
5242 * @retval HAL status
5243 */
5244
HAL_TIM_GenerateEvent(TIM_HandleTypeDef * htim,uint32_t EventSource)5245 HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
5246 {
5247 /* Check the parameters */
5248 assert_param(IS_TIM_INSTANCE(htim->Instance));
5249 assert_param(IS_TIM_EVENT_SOURCE(EventSource));
5250
5251 /* Process Locked */
5252 __HAL_LOCK(htim);
5253
5254 /* Change the TIM state */
5255 htim->State = HAL_TIM_STATE_BUSY;
5256
5257 /* Set the event sources */
5258 htim->Instance->EGR = EventSource;
5259
5260 /* Change the TIM state */
5261 htim->State = HAL_TIM_STATE_READY;
5262
5263 __HAL_UNLOCK(htim);
5264
5265 /* Return function status */
5266 return HAL_OK;
5267 }
5268
5269 /**
5270 * @brief Configures the OCRef clear feature
5271 * @param htim TIM handle
5272 * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
5273 * contains the OCREF clear feature and parameters for the TIM peripheral.
5274 * @param Channel specifies the TIM Channel
5275 * This parameter can be one of the following values:
5276 * @arg TIM_CHANNEL_1: TIM Channel 1
5277 * @arg TIM_CHANNEL_2: TIM Channel 2
5278 * @arg TIM_CHANNEL_3: TIM Channel 3
5279 * @arg TIM_CHANNEL_4: TIM Channel 4
5280 * @arg TIM_CHANNEL_5: TIM Channel 5
5281 * @arg TIM_CHANNEL_6: TIM Channel 6
5282 * @retval HAL status
5283 */
HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef * htim,const TIM_ClearInputConfigTypeDef * sClearInputConfig,uint32_t Channel)5284 HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim,
5285 const TIM_ClearInputConfigTypeDef *sClearInputConfig,
5286 uint32_t Channel)
5287 {
5288 HAL_StatusTypeDef status = HAL_OK;
5289
5290 /* Check the parameters */
5291 assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
5292 assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
5293
5294 /* Process Locked */
5295 __HAL_LOCK(htim);
5296
5297 htim->State = HAL_TIM_STATE_BUSY;
5298
5299 switch (sClearInputConfig->ClearInputSource)
5300 {
5301 case TIM_CLEARINPUTSOURCE_NONE:
5302 {
5303 /* Clear the OCREF clear selection bit and the the ETR Bits */
5304 CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP));
5305 break;
5306 }
5307 case TIM_CLEARINPUTSOURCE_OCREFCLR:
5308 {
5309 /* Clear the OCREF clear selection bit */
5310 CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS);
5311 break;
5312 }
5313
5314 case TIM_CLEARINPUTSOURCE_ETR:
5315 {
5316 /* Check the parameters */
5317 assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
5318 assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
5319 assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
5320
5321 /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */
5322 if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1)
5323 {
5324 htim->State = HAL_TIM_STATE_READY;
5325 __HAL_UNLOCK(htim);
5326 return HAL_ERROR;
5327 }
5328
5329 TIM_ETR_SetConfig(htim->Instance,
5330 sClearInputConfig->ClearInputPrescaler,
5331 sClearInputConfig->ClearInputPolarity,
5332 sClearInputConfig->ClearInputFilter);
5333
5334 /* Set the OCREF clear selection bit */
5335 SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS);
5336 break;
5337 }
5338
5339 default:
5340 status = HAL_ERROR;
5341 break;
5342 }
5343
5344 if (status == HAL_OK)
5345 {
5346 switch (Channel)
5347 {
5348 case TIM_CHANNEL_1:
5349 {
5350 if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
5351 {
5352 /* Enable the OCREF clear feature for Channel 1 */
5353 SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE);
5354 }
5355 else
5356 {
5357 /* Disable the OCREF clear feature for Channel 1 */
5358 CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE);
5359 }
5360 break;
5361 }
5362 case TIM_CHANNEL_2:
5363 {
5364 if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
5365 {
5366 /* Enable the OCREF clear feature for Channel 2 */
5367 SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE);
5368 }
5369 else
5370 {
5371 /* Disable the OCREF clear feature for Channel 2 */
5372 CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE);
5373 }
5374 break;
5375 }
5376 case TIM_CHANNEL_3:
5377 {
5378 if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
5379 {
5380 /* Enable the OCREF clear feature for Channel 3 */
5381 SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE);
5382 }
5383 else
5384 {
5385 /* Disable the OCREF clear feature for Channel 3 */
5386 CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE);
5387 }
5388 break;
5389 }
5390 case TIM_CHANNEL_4:
5391 {
5392 if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
5393 {
5394 /* Enable the OCREF clear feature for Channel 4 */
5395 SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE);
5396 }
5397 else
5398 {
5399 /* Disable the OCREF clear feature for Channel 4 */
5400 CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE);
5401 }
5402 break;
5403 }
5404 case TIM_CHANNEL_5:
5405 {
5406 if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
5407 {
5408 /* Enable the OCREF clear feature for Channel 5 */
5409 SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE);
5410 }
5411 else
5412 {
5413 /* Disable the OCREF clear feature for Channel 5 */
5414 CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE);
5415 }
5416 break;
5417 }
5418 case TIM_CHANNEL_6:
5419 {
5420 if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
5421 {
5422 /* Enable the OCREF clear feature for Channel 6 */
5423 SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE);
5424 }
5425 else
5426 {
5427 /* Disable the OCREF clear feature for Channel 6 */
5428 CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE);
5429 }
5430 break;
5431 }
5432 default:
5433 break;
5434 }
5435 }
5436
5437 htim->State = HAL_TIM_STATE_READY;
5438
5439 __HAL_UNLOCK(htim);
5440
5441 return status;
5442 }
5443
5444 /**
5445 * @brief Configures the clock source to be used
5446 * @param htim TIM handle
5447 * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that
5448 * contains the clock source information for the TIM peripheral.
5449 * @retval HAL status
5450 */
HAL_TIM_ConfigClockSource(TIM_HandleTypeDef * htim,const TIM_ClockConfigTypeDef * sClockSourceConfig)5451 HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig)
5452 {
5453 HAL_StatusTypeDef status = HAL_OK;
5454 uint32_t tmpsmcr;
5455
5456 /* Process Locked */
5457 __HAL_LOCK(htim);
5458
5459 htim->State = HAL_TIM_STATE_BUSY;
5460
5461 /* Check the parameters */
5462 assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
5463
5464 /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
5465 tmpsmcr = htim->Instance->SMCR;
5466 tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
5467 tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
5468 htim->Instance->SMCR = tmpsmcr;
5469
5470 switch (sClockSourceConfig->ClockSource)
5471 {
5472 case TIM_CLOCKSOURCE_INTERNAL:
5473 {
5474 assert_param(IS_TIM_INSTANCE(htim->Instance));
5475 break;
5476 }
5477
5478 case TIM_CLOCKSOURCE_ETRMODE1:
5479 {
5480 /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/
5481 assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
5482
5483 /* Check ETR input conditioning related parameters */
5484 assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
5485 assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
5486 assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
5487
5488 /* Configure the ETR Clock source */
5489 TIM_ETR_SetConfig(htim->Instance,
5490 sClockSourceConfig->ClockPrescaler,
5491 sClockSourceConfig->ClockPolarity,
5492 sClockSourceConfig->ClockFilter);
5493
5494 /* Select the External clock mode1 and the ETRF trigger */
5495 tmpsmcr = htim->Instance->SMCR;
5496 tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
5497 /* Write to TIMx SMCR */
5498 htim->Instance->SMCR = tmpsmcr;
5499 break;
5500 }
5501
5502 case TIM_CLOCKSOURCE_ETRMODE2:
5503 {
5504 /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/
5505 assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance));
5506
5507 /* Check ETR input conditioning related parameters */
5508 assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
5509 assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
5510 assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
5511
5512 /* Configure the ETR Clock source */
5513 TIM_ETR_SetConfig(htim->Instance,
5514 sClockSourceConfig->ClockPrescaler,
5515 sClockSourceConfig->ClockPolarity,
5516 sClockSourceConfig->ClockFilter);
5517 /* Enable the External clock mode2 */
5518 htim->Instance->SMCR |= TIM_SMCR_ECE;
5519 break;
5520 }
5521
5522 case TIM_CLOCKSOURCE_TI1:
5523 {
5524 /* Check whether or not the timer instance supports external clock mode 1 */
5525 assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
5526
5527 /* Check TI1 input conditioning related parameters */
5528 assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
5529 assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
5530
5531 TIM_TI1_ConfigInputStage(htim->Instance,
5532 sClockSourceConfig->ClockPolarity,
5533 sClockSourceConfig->ClockFilter);
5534 TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
5535 break;
5536 }
5537
5538 case TIM_CLOCKSOURCE_TI2:
5539 {
5540 /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/
5541 assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
5542
5543 /* Check TI2 input conditioning related parameters */
5544 assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
5545 assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
5546
5547 TIM_TI2_ConfigInputStage(htim->Instance,
5548 sClockSourceConfig->ClockPolarity,
5549 sClockSourceConfig->ClockFilter);
5550 TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
5551 break;
5552 }
5553
5554 case TIM_CLOCKSOURCE_TI1ED:
5555 {
5556 /* Check whether or not the timer instance supports external clock mode 1 */
5557 assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
5558
5559 /* Check TI1 input conditioning related parameters */
5560 assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
5561 assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
5562
5563 TIM_TI1_ConfigInputStage(htim->Instance,
5564 sClockSourceConfig->ClockPolarity,
5565 sClockSourceConfig->ClockFilter);
5566 TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
5567 break;
5568 }
5569
5570 case TIM_CLOCKSOURCE_ITR0:
5571 case TIM_CLOCKSOURCE_ITR1:
5572 case TIM_CLOCKSOURCE_ITR2:
5573 case TIM_CLOCKSOURCE_ITR3:
5574 {
5575 /* Check whether or not the timer instance supports internal trigger input */
5576 assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
5577
5578 TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource);
5579 break;
5580 }
5581
5582 default:
5583 status = HAL_ERROR;
5584 break;
5585 }
5586 htim->State = HAL_TIM_STATE_READY;
5587
5588 __HAL_UNLOCK(htim);
5589
5590 return status;
5591 }
5592
5593 /**
5594 * @brief Selects the signal connected to the TI1 input: direct from CH1_input
5595 * or a XOR combination between CH1_input, CH2_input & CH3_input
5596 * @param htim TIM handle.
5597 * @param TI1_Selection Indicate whether or not channel 1 is connected to the
5598 * output of a XOR gate.
5599 * This parameter can be one of the following values:
5600 * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
5601 * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
5602 * pins are connected to the TI1 input (XOR combination)
5603 * @retval HAL status
5604 */
HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef * htim,uint32_t TI1_Selection)5605 HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
5606 {
5607 uint32_t tmpcr2;
5608
5609 /* Check the parameters */
5610 assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
5611 assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
5612
5613 /* Get the TIMx CR2 register value */
5614 tmpcr2 = htim->Instance->CR2;
5615
5616 /* Reset the TI1 selection */
5617 tmpcr2 &= ~TIM_CR2_TI1S;
5618
5619 /* Set the TI1 selection */
5620 tmpcr2 |= TI1_Selection;
5621
5622 /* Write to TIMxCR2 */
5623 htim->Instance->CR2 = tmpcr2;
5624
5625 return HAL_OK;
5626 }
5627
5628 /**
5629 * @brief Configures the TIM in Slave mode
5630 * @param htim TIM handle.
5631 * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
5632 * contains the selected trigger (internal trigger input, filtered
5633 * timer input or external trigger input) and the Slave mode
5634 * (Disable, Reset, Gated, Trigger, External clock mode 1).
5635 * @retval HAL status
5636 */
HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef * htim,const TIM_SlaveConfigTypeDef * sSlaveConfig)5637 HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig)
5638 {
5639 /* Check the parameters */
5640 assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
5641 assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
5642 assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
5643
5644 __HAL_LOCK(htim);
5645
5646 htim->State = HAL_TIM_STATE_BUSY;
5647
5648 if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
5649 {
5650 htim->State = HAL_TIM_STATE_READY;
5651 __HAL_UNLOCK(htim);
5652 return HAL_ERROR;
5653 }
5654
5655 /* Disable Trigger Interrupt */
5656 __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
5657
5658 /* Disable Trigger DMA request */
5659 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
5660
5661 htim->State = HAL_TIM_STATE_READY;
5662
5663 __HAL_UNLOCK(htim);
5664
5665 return HAL_OK;
5666 }
5667
5668 /**
5669 * @brief Configures the TIM in Slave mode in interrupt mode
5670 * @param htim TIM handle.
5671 * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
5672 * contains the selected trigger (internal trigger input, filtered
5673 * timer input or external trigger input) and the Slave mode
5674 * (Disable, Reset, Gated, Trigger, External clock mode 1).
5675 * @retval HAL status
5676 */
HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef * htim,const TIM_SlaveConfigTypeDef * sSlaveConfig)5677 HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim,
5678 const TIM_SlaveConfigTypeDef *sSlaveConfig)
5679 {
5680 /* Check the parameters */
5681 assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
5682 assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
5683 assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
5684
5685 __HAL_LOCK(htim);
5686
5687 htim->State = HAL_TIM_STATE_BUSY;
5688
5689 if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
5690 {
5691 htim->State = HAL_TIM_STATE_READY;
5692 __HAL_UNLOCK(htim);
5693 return HAL_ERROR;
5694 }
5695
5696 /* Enable Trigger Interrupt */
5697 __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
5698
5699 /* Disable Trigger DMA request */
5700 __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
5701
5702 htim->State = HAL_TIM_STATE_READY;
5703
5704 __HAL_UNLOCK(htim);
5705
5706 return HAL_OK;
5707 }
5708
5709 /**
5710 * @brief Read the captured value from Capture Compare unit
5711 * @param htim TIM handle.
5712 * @param Channel TIM Channels to be enabled
5713 * This parameter can be one of the following values:
5714 * @arg TIM_CHANNEL_1: TIM Channel 1 selected
5715 * @arg TIM_CHANNEL_2: TIM Channel 2 selected
5716 * @arg TIM_CHANNEL_3: TIM Channel 3 selected
5717 * @arg TIM_CHANNEL_4: TIM Channel 4 selected
5718 * @retval Captured value
5719 */
HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef * htim,uint32_t Channel)5720 uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel)
5721 {
5722 uint32_t tmpreg = 0U;
5723
5724 switch (Channel)
5725 {
5726 case TIM_CHANNEL_1:
5727 {
5728 /* Check the parameters */
5729 assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
5730
5731 /* Return the capture 1 value */
5732 tmpreg = htim->Instance->CCR1;
5733
5734 break;
5735 }
5736 case TIM_CHANNEL_2:
5737 {
5738 /* Check the parameters */
5739 assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
5740
5741 /* Return the capture 2 value */
5742 tmpreg = htim->Instance->CCR2;
5743
5744 break;
5745 }
5746
5747 case TIM_CHANNEL_3:
5748 {
5749 /* Check the parameters */
5750 assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
5751
5752 /* Return the capture 3 value */
5753 tmpreg = htim->Instance->CCR3;
5754
5755 break;
5756 }
5757
5758 case TIM_CHANNEL_4:
5759 {
5760 /* Check the parameters */
5761 assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
5762
5763 /* Return the capture 4 value */
5764 tmpreg = htim->Instance->CCR4;
5765
5766 break;
5767 }
5768
5769 default:
5770 break;
5771 }
5772
5773 return tmpreg;
5774 }
5775
5776 /**
5777 * @}
5778 */
5779
5780 /** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
5781 * @brief TIM Callbacks functions
5782 *
5783 @verbatim
5784 ==============================================================================
5785 ##### TIM Callbacks functions #####
5786 ==============================================================================
5787 [..]
5788 This section provides TIM callback functions:
5789 (+) TIM Period elapsed callback
5790 (+) TIM Output Compare callback
5791 (+) TIM Input capture callback
5792 (+) TIM Trigger callback
5793 (+) TIM Error callback
5794
5795 @endverbatim
5796 * @{
5797 */
5798
5799 /**
5800 * @brief Period elapsed callback in non-blocking mode
5801 * @param htim TIM handle
5802 * @retval None
5803 */
HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef * htim)5804 __weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
5805 {
5806 /* Prevent unused argument(s) compilation warning */
5807 UNUSED(htim);
5808
5809 /* NOTE : This function should not be modified, when the callback is needed,
5810 the HAL_TIM_PeriodElapsedCallback could be implemented in the user file
5811 */
5812 }
5813
5814 /**
5815 * @brief Period elapsed half complete callback in non-blocking mode
5816 * @param htim TIM handle
5817 * @retval None
5818 */
HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef * htim)5819 __weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim)
5820 {
5821 /* Prevent unused argument(s) compilation warning */
5822 UNUSED(htim);
5823
5824 /* NOTE : This function should not be modified, when the callback is needed,
5825 the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file
5826 */
5827 }
5828
5829 /**
5830 * @brief Output Compare callback in non-blocking mode
5831 * @param htim TIM OC handle
5832 * @retval None
5833 */
HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef * htim)5834 __weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
5835 {
5836 /* Prevent unused argument(s) compilation warning */
5837 UNUSED(htim);
5838
5839 /* NOTE : This function should not be modified, when the callback is needed,
5840 the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
5841 */
5842 }
5843
5844 /**
5845 * @brief Input Capture callback in non-blocking mode
5846 * @param htim TIM IC handle
5847 * @retval None
5848 */
HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef * htim)5849 __weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
5850 {
5851 /* Prevent unused argument(s) compilation warning */
5852 UNUSED(htim);
5853
5854 /* NOTE : This function should not be modified, when the callback is needed,
5855 the HAL_TIM_IC_CaptureCallback could be implemented in the user file
5856 */
5857 }
5858
5859 /**
5860 * @brief Input Capture half complete callback in non-blocking mode
5861 * @param htim TIM IC handle
5862 * @retval None
5863 */
HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef * htim)5864 __weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim)
5865 {
5866 /* Prevent unused argument(s) compilation warning */
5867 UNUSED(htim);
5868
5869 /* NOTE : This function should not be modified, when the callback is needed,
5870 the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file
5871 */
5872 }
5873
5874 /**
5875 * @brief PWM Pulse finished callback in non-blocking mode
5876 * @param htim TIM handle
5877 * @retval None
5878 */
HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef * htim)5879 __weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
5880 {
5881 /* Prevent unused argument(s) compilation warning */
5882 UNUSED(htim);
5883
5884 /* NOTE : This function should not be modified, when the callback is needed,
5885 the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
5886 */
5887 }
5888
5889 /**
5890 * @brief PWM Pulse finished half complete callback in non-blocking mode
5891 * @param htim TIM handle
5892 * @retval None
5893 */
HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef * htim)5894 __weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim)
5895 {
5896 /* Prevent unused argument(s) compilation warning */
5897 UNUSED(htim);
5898
5899 /* NOTE : This function should not be modified, when the callback is needed,
5900 the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file
5901 */
5902 }
5903
5904 /**
5905 * @brief Hall Trigger detection callback in non-blocking mode
5906 * @param htim TIM handle
5907 * @retval None
5908 */
HAL_TIM_TriggerCallback(TIM_HandleTypeDef * htim)5909 __weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
5910 {
5911 /* Prevent unused argument(s) compilation warning */
5912 UNUSED(htim);
5913
5914 /* NOTE : This function should not be modified, when the callback is needed,
5915 the HAL_TIM_TriggerCallback could be implemented in the user file
5916 */
5917 }
5918
5919 /**
5920 * @brief Hall Trigger detection half complete callback in non-blocking mode
5921 * @param htim TIM handle
5922 * @retval None
5923 */
HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef * htim)5924 __weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim)
5925 {
5926 /* Prevent unused argument(s) compilation warning */
5927 UNUSED(htim);
5928
5929 /* NOTE : This function should not be modified, when the callback is needed,
5930 the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file
5931 */
5932 }
5933
5934 /**
5935 * @brief Timer error callback in non-blocking mode
5936 * @param htim TIM handle
5937 * @retval None
5938 */
HAL_TIM_ErrorCallback(TIM_HandleTypeDef * htim)5939 __weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
5940 {
5941 /* Prevent unused argument(s) compilation warning */
5942 UNUSED(htim);
5943
5944 /* NOTE : This function should not be modified, when the callback is needed,
5945 the HAL_TIM_ErrorCallback could be implemented in the user file
5946 */
5947 }
5948
5949 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
5950 /**
5951 * @brief Register a User TIM callback to be used instead of the weak predefined callback
5952 * @param htim tim handle
5953 * @param CallbackID ID of the callback to be registered
5954 * This parameter can be one of the following values:
5955 * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
5956 * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
5957 * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
5958 * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
5959 * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
5960 * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
5961 * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
5962 * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
5963 * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
5964 * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
5965 * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
5966 * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
5967 * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
5968 * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
5969 * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
5970 * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID
5971 * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
5972 * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID
5973 * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
5974 * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID
5975 * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
5976 * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
5977 * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID
5978 * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
5979 * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
5980 * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID
5981 * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
5982 * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID
5983 * @param pCallback pointer to the callback function
5984 * @retval status
5985 */
HAL_TIM_RegisterCallback(TIM_HandleTypeDef * htim,HAL_TIM_CallbackIDTypeDef CallbackID,pTIM_CallbackTypeDef pCallback)5986 HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID,
5987 pTIM_CallbackTypeDef pCallback)
5988 {
5989 HAL_StatusTypeDef status = HAL_OK;
5990
5991 if (pCallback == NULL)
5992 {
5993 return HAL_ERROR;
5994 }
5995
5996 if (htim->State == HAL_TIM_STATE_READY)
5997 {
5998 switch (CallbackID)
5999 {
6000 case HAL_TIM_BASE_MSPINIT_CB_ID :
6001 htim->Base_MspInitCallback = pCallback;
6002 break;
6003
6004 case HAL_TIM_BASE_MSPDEINIT_CB_ID :
6005 htim->Base_MspDeInitCallback = pCallback;
6006 break;
6007
6008 case HAL_TIM_IC_MSPINIT_CB_ID :
6009 htim->IC_MspInitCallback = pCallback;
6010 break;
6011
6012 case HAL_TIM_IC_MSPDEINIT_CB_ID :
6013 htim->IC_MspDeInitCallback = pCallback;
6014 break;
6015
6016 case HAL_TIM_OC_MSPINIT_CB_ID :
6017 htim->OC_MspInitCallback = pCallback;
6018 break;
6019
6020 case HAL_TIM_OC_MSPDEINIT_CB_ID :
6021 htim->OC_MspDeInitCallback = pCallback;
6022 break;
6023
6024 case HAL_TIM_PWM_MSPINIT_CB_ID :
6025 htim->PWM_MspInitCallback = pCallback;
6026 break;
6027
6028 case HAL_TIM_PWM_MSPDEINIT_CB_ID :
6029 htim->PWM_MspDeInitCallback = pCallback;
6030 break;
6031
6032 case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
6033 htim->OnePulse_MspInitCallback = pCallback;
6034 break;
6035
6036 case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
6037 htim->OnePulse_MspDeInitCallback = pCallback;
6038 break;
6039
6040 case HAL_TIM_ENCODER_MSPINIT_CB_ID :
6041 htim->Encoder_MspInitCallback = pCallback;
6042 break;
6043
6044 case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
6045 htim->Encoder_MspDeInitCallback = pCallback;
6046 break;
6047
6048 case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
6049 htim->HallSensor_MspInitCallback = pCallback;
6050 break;
6051
6052 case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
6053 htim->HallSensor_MspDeInitCallback = pCallback;
6054 break;
6055
6056 case HAL_TIM_PERIOD_ELAPSED_CB_ID :
6057 htim->PeriodElapsedCallback = pCallback;
6058 break;
6059
6060 case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID :
6061 htim->PeriodElapsedHalfCpltCallback = pCallback;
6062 break;
6063
6064 case HAL_TIM_TRIGGER_CB_ID :
6065 htim->TriggerCallback = pCallback;
6066 break;
6067
6068 case HAL_TIM_TRIGGER_HALF_CB_ID :
6069 htim->TriggerHalfCpltCallback = pCallback;
6070 break;
6071
6072 case HAL_TIM_IC_CAPTURE_CB_ID :
6073 htim->IC_CaptureCallback = pCallback;
6074 break;
6075
6076 case HAL_TIM_IC_CAPTURE_HALF_CB_ID :
6077 htim->IC_CaptureHalfCpltCallback = pCallback;
6078 break;
6079
6080 case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
6081 htim->OC_DelayElapsedCallback = pCallback;
6082 break;
6083
6084 case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
6085 htim->PWM_PulseFinishedCallback = pCallback;
6086 break;
6087
6088 case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID :
6089 htim->PWM_PulseFinishedHalfCpltCallback = pCallback;
6090 break;
6091
6092 case HAL_TIM_ERROR_CB_ID :
6093 htim->ErrorCallback = pCallback;
6094 break;
6095
6096 case HAL_TIM_COMMUTATION_CB_ID :
6097 htim->CommutationCallback = pCallback;
6098 break;
6099
6100 case HAL_TIM_COMMUTATION_HALF_CB_ID :
6101 htim->CommutationHalfCpltCallback = pCallback;
6102 break;
6103
6104 case HAL_TIM_BREAK_CB_ID :
6105 htim->BreakCallback = pCallback;
6106 break;
6107
6108 case HAL_TIM_BREAK2_CB_ID :
6109 htim->Break2Callback = pCallback;
6110 break;
6111
6112 default :
6113 /* Return error status */
6114 status = HAL_ERROR;
6115 break;
6116 }
6117 }
6118 else if (htim->State == HAL_TIM_STATE_RESET)
6119 {
6120 switch (CallbackID)
6121 {
6122 case HAL_TIM_BASE_MSPINIT_CB_ID :
6123 htim->Base_MspInitCallback = pCallback;
6124 break;
6125
6126 case HAL_TIM_BASE_MSPDEINIT_CB_ID :
6127 htim->Base_MspDeInitCallback = pCallback;
6128 break;
6129
6130 case HAL_TIM_IC_MSPINIT_CB_ID :
6131 htim->IC_MspInitCallback = pCallback;
6132 break;
6133
6134 case HAL_TIM_IC_MSPDEINIT_CB_ID :
6135 htim->IC_MspDeInitCallback = pCallback;
6136 break;
6137
6138 case HAL_TIM_OC_MSPINIT_CB_ID :
6139 htim->OC_MspInitCallback = pCallback;
6140 break;
6141
6142 case HAL_TIM_OC_MSPDEINIT_CB_ID :
6143 htim->OC_MspDeInitCallback = pCallback;
6144 break;
6145
6146 case HAL_TIM_PWM_MSPINIT_CB_ID :
6147 htim->PWM_MspInitCallback = pCallback;
6148 break;
6149
6150 case HAL_TIM_PWM_MSPDEINIT_CB_ID :
6151 htim->PWM_MspDeInitCallback = pCallback;
6152 break;
6153
6154 case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
6155 htim->OnePulse_MspInitCallback = pCallback;
6156 break;
6157
6158 case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
6159 htim->OnePulse_MspDeInitCallback = pCallback;
6160 break;
6161
6162 case HAL_TIM_ENCODER_MSPINIT_CB_ID :
6163 htim->Encoder_MspInitCallback = pCallback;
6164 break;
6165
6166 case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
6167 htim->Encoder_MspDeInitCallback = pCallback;
6168 break;
6169
6170 case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
6171 htim->HallSensor_MspInitCallback = pCallback;
6172 break;
6173
6174 case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
6175 htim->HallSensor_MspDeInitCallback = pCallback;
6176 break;
6177
6178 default :
6179 /* Return error status */
6180 status = HAL_ERROR;
6181 break;
6182 }
6183 }
6184 else
6185 {
6186 /* Return error status */
6187 status = HAL_ERROR;
6188 }
6189
6190 return status;
6191 }
6192
6193 /**
6194 * @brief Unregister a TIM callback
6195 * TIM callback is redirected to the weak predefined callback
6196 * @param htim tim handle
6197 * @param CallbackID ID of the callback to be unregistered
6198 * This parameter can be one of the following values:
6199 * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
6200 * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
6201 * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
6202 * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
6203 * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
6204 * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
6205 * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
6206 * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
6207 * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
6208 * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
6209 * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
6210 * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
6211 * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
6212 * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
6213 * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
6214 * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID
6215 * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
6216 * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID
6217 * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
6218 * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID
6219 * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
6220 * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
6221 * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID
6222 * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
6223 * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
6224 * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID
6225 * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
6226 * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID
6227 * @retval status
6228 */
HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef * htim,HAL_TIM_CallbackIDTypeDef CallbackID)6229 HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID)
6230 {
6231 HAL_StatusTypeDef status = HAL_OK;
6232
6233 if (htim->State == HAL_TIM_STATE_READY)
6234 {
6235 switch (CallbackID)
6236 {
6237 case HAL_TIM_BASE_MSPINIT_CB_ID :
6238 /* Legacy weak Base MspInit Callback */
6239 htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
6240 break;
6241
6242 case HAL_TIM_BASE_MSPDEINIT_CB_ID :
6243 /* Legacy weak Base Msp DeInit Callback */
6244 htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
6245 break;
6246
6247 case HAL_TIM_IC_MSPINIT_CB_ID :
6248 /* Legacy weak IC Msp Init Callback */
6249 htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
6250 break;
6251
6252 case HAL_TIM_IC_MSPDEINIT_CB_ID :
6253 /* Legacy weak IC Msp DeInit Callback */
6254 htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
6255 break;
6256
6257 case HAL_TIM_OC_MSPINIT_CB_ID :
6258 /* Legacy weak OC Msp Init Callback */
6259 htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
6260 break;
6261
6262 case HAL_TIM_OC_MSPDEINIT_CB_ID :
6263 /* Legacy weak OC Msp DeInit Callback */
6264 htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
6265 break;
6266
6267 case HAL_TIM_PWM_MSPINIT_CB_ID :
6268 /* Legacy weak PWM Msp Init Callback */
6269 htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
6270 break;
6271
6272 case HAL_TIM_PWM_MSPDEINIT_CB_ID :
6273 /* Legacy weak PWM Msp DeInit Callback */
6274 htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
6275 break;
6276
6277 case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
6278 /* Legacy weak One Pulse Msp Init Callback */
6279 htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
6280 break;
6281
6282 case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
6283 /* Legacy weak One Pulse Msp DeInit Callback */
6284 htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
6285 break;
6286
6287 case HAL_TIM_ENCODER_MSPINIT_CB_ID :
6288 /* Legacy weak Encoder Msp Init Callback */
6289 htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
6290 break;
6291
6292 case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
6293 /* Legacy weak Encoder Msp DeInit Callback */
6294 htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
6295 break;
6296
6297 case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
6298 /* Legacy weak Hall Sensor Msp Init Callback */
6299 htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
6300 break;
6301
6302 case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
6303 /* Legacy weak Hall Sensor Msp DeInit Callback */
6304 htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
6305 break;
6306
6307 case HAL_TIM_PERIOD_ELAPSED_CB_ID :
6308 /* Legacy weak Period Elapsed Callback */
6309 htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback;
6310 break;
6311
6312 case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID :
6313 /* Legacy weak Period Elapsed half complete Callback */
6314 htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback;
6315 break;
6316
6317 case HAL_TIM_TRIGGER_CB_ID :
6318 /* Legacy weak Trigger Callback */
6319 htim->TriggerCallback = HAL_TIM_TriggerCallback;
6320 break;
6321
6322 case HAL_TIM_TRIGGER_HALF_CB_ID :
6323 /* Legacy weak Trigger half complete Callback */
6324 htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback;
6325 break;
6326
6327 case HAL_TIM_IC_CAPTURE_CB_ID :
6328 /* Legacy weak IC Capture Callback */
6329 htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback;
6330 break;
6331
6332 case HAL_TIM_IC_CAPTURE_HALF_CB_ID :
6333 /* Legacy weak IC Capture half complete Callback */
6334 htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback;
6335 break;
6336
6337 case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
6338 /* Legacy weak OC Delay Elapsed Callback */
6339 htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback;
6340 break;
6341
6342 case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
6343 /* Legacy weak PWM Pulse Finished Callback */
6344 htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback;
6345 break;
6346
6347 case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID :
6348 /* Legacy weak PWM Pulse Finished half complete Callback */
6349 htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback;
6350 break;
6351
6352 case HAL_TIM_ERROR_CB_ID :
6353 /* Legacy weak Error Callback */
6354 htim->ErrorCallback = HAL_TIM_ErrorCallback;
6355 break;
6356
6357 case HAL_TIM_COMMUTATION_CB_ID :
6358 /* Legacy weak Commutation Callback */
6359 htim->CommutationCallback = HAL_TIMEx_CommutCallback;
6360 break;
6361
6362 case HAL_TIM_COMMUTATION_HALF_CB_ID :
6363 /* Legacy weak Commutation half complete Callback */
6364 htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback;
6365 break;
6366
6367 case HAL_TIM_BREAK_CB_ID :
6368 /* Legacy weak Break Callback */
6369 htim->BreakCallback = HAL_TIMEx_BreakCallback;
6370 break;
6371
6372 case HAL_TIM_BREAK2_CB_ID :
6373 /* Legacy weak Break2 Callback */
6374 htim->Break2Callback = HAL_TIMEx_Break2Callback;
6375 break;
6376
6377 default :
6378 /* Return error status */
6379 status = HAL_ERROR;
6380 break;
6381 }
6382 }
6383 else if (htim->State == HAL_TIM_STATE_RESET)
6384 {
6385 switch (CallbackID)
6386 {
6387 case HAL_TIM_BASE_MSPINIT_CB_ID :
6388 /* Legacy weak Base MspInit Callback */
6389 htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
6390 break;
6391
6392 case HAL_TIM_BASE_MSPDEINIT_CB_ID :
6393 /* Legacy weak Base Msp DeInit Callback */
6394 htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
6395 break;
6396
6397 case HAL_TIM_IC_MSPINIT_CB_ID :
6398 /* Legacy weak IC Msp Init Callback */
6399 htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
6400 break;
6401
6402 case HAL_TIM_IC_MSPDEINIT_CB_ID :
6403 /* Legacy weak IC Msp DeInit Callback */
6404 htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
6405 break;
6406
6407 case HAL_TIM_OC_MSPINIT_CB_ID :
6408 /* Legacy weak OC Msp Init Callback */
6409 htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
6410 break;
6411
6412 case HAL_TIM_OC_MSPDEINIT_CB_ID :
6413 /* Legacy weak OC Msp DeInit Callback */
6414 htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
6415 break;
6416
6417 case HAL_TIM_PWM_MSPINIT_CB_ID :
6418 /* Legacy weak PWM Msp Init Callback */
6419 htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
6420 break;
6421
6422 case HAL_TIM_PWM_MSPDEINIT_CB_ID :
6423 /* Legacy weak PWM Msp DeInit Callback */
6424 htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
6425 break;
6426
6427 case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
6428 /* Legacy weak One Pulse Msp Init Callback */
6429 htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
6430 break;
6431
6432 case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
6433 /* Legacy weak One Pulse Msp DeInit Callback */
6434 htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
6435 break;
6436
6437 case HAL_TIM_ENCODER_MSPINIT_CB_ID :
6438 /* Legacy weak Encoder Msp Init Callback */
6439 htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
6440 break;
6441
6442 case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
6443 /* Legacy weak Encoder Msp DeInit Callback */
6444 htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
6445 break;
6446
6447 case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
6448 /* Legacy weak Hall Sensor Msp Init Callback */
6449 htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
6450 break;
6451
6452 case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
6453 /* Legacy weak Hall Sensor Msp DeInit Callback */
6454 htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
6455 break;
6456
6457 default :
6458 /* Return error status */
6459 status = HAL_ERROR;
6460 break;
6461 }
6462 }
6463 else
6464 {
6465 /* Return error status */
6466 status = HAL_ERROR;
6467 }
6468
6469 return status;
6470 }
6471 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6472
6473 /**
6474 * @}
6475 */
6476
6477 /** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions
6478 * @brief TIM Peripheral State functions
6479 *
6480 @verbatim
6481 ==============================================================================
6482 ##### Peripheral State functions #####
6483 ==============================================================================
6484 [..]
6485 This subsection permits to get in run-time the status of the peripheral
6486 and the data flow.
6487
6488 @endverbatim
6489 * @{
6490 */
6491
6492 /**
6493 * @brief Return the TIM Base handle state.
6494 * @param htim TIM Base handle
6495 * @retval HAL state
6496 */
HAL_TIM_Base_GetState(const TIM_HandleTypeDef * htim)6497 HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim)
6498 {
6499 return htim->State;
6500 }
6501
6502 /**
6503 * @brief Return the TIM OC handle state.
6504 * @param htim TIM Output Compare handle
6505 * @retval HAL state
6506 */
HAL_TIM_OC_GetState(const TIM_HandleTypeDef * htim)6507 HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim)
6508 {
6509 return htim->State;
6510 }
6511
6512 /**
6513 * @brief Return the TIM PWM handle state.
6514 * @param htim TIM handle
6515 * @retval HAL state
6516 */
HAL_TIM_PWM_GetState(const TIM_HandleTypeDef * htim)6517 HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim)
6518 {
6519 return htim->State;
6520 }
6521
6522 /**
6523 * @brief Return the TIM Input Capture handle state.
6524 * @param htim TIM IC handle
6525 * @retval HAL state
6526 */
HAL_TIM_IC_GetState(const TIM_HandleTypeDef * htim)6527 HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim)
6528 {
6529 return htim->State;
6530 }
6531
6532 /**
6533 * @brief Return the TIM One Pulse Mode handle state.
6534 * @param htim TIM OPM handle
6535 * @retval HAL state
6536 */
HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef * htim)6537 HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim)
6538 {
6539 return htim->State;
6540 }
6541
6542 /**
6543 * @brief Return the TIM Encoder Mode handle state.
6544 * @param htim TIM Encoder Interface handle
6545 * @retval HAL state
6546 */
HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef * htim)6547 HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim)
6548 {
6549 return htim->State;
6550 }
6551
6552 /**
6553 * @brief Return the TIM Encoder Mode handle state.
6554 * @param htim TIM handle
6555 * @retval Active channel
6556 */
HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef * htim)6557 HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim)
6558 {
6559 return htim->Channel;
6560 }
6561
6562 /**
6563 * @brief Return actual state of the TIM channel.
6564 * @param htim TIM handle
6565 * @param Channel TIM Channel
6566 * This parameter can be one of the following values:
6567 * @arg TIM_CHANNEL_1: TIM Channel 1
6568 * @arg TIM_CHANNEL_2: TIM Channel 2
6569 * @arg TIM_CHANNEL_3: TIM Channel 3
6570 * @arg TIM_CHANNEL_4: TIM Channel 4
6571 * @arg TIM_CHANNEL_5: TIM Channel 5
6572 * @arg TIM_CHANNEL_6: TIM Channel 6
6573 * @retval TIM Channel state
6574 */
HAL_TIM_GetChannelState(const TIM_HandleTypeDef * htim,uint32_t Channel)6575 HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel)
6576 {
6577 HAL_TIM_ChannelStateTypeDef channel_state;
6578
6579 /* Check the parameters */
6580 assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
6581
6582 channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
6583
6584 return channel_state;
6585 }
6586
6587 /**
6588 * @brief Return actual state of a DMA burst operation.
6589 * @param htim TIM handle
6590 * @retval DMA burst state
6591 */
HAL_TIM_DMABurstState(const TIM_HandleTypeDef * htim)6592 HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim)
6593 {
6594 /* Check the parameters */
6595 assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
6596
6597 return htim->DMABurstState;
6598 }
6599
6600 /**
6601 * @}
6602 */
6603
6604 /**
6605 * @}
6606 */
6607
6608 /** @defgroup TIM_Private_Functions TIM Private Functions
6609 * @{
6610 */
6611
6612 /**
6613 * @brief TIM DMA error callback
6614 * @param hdma pointer to DMA handle.
6615 * @retval None
6616 */
TIM_DMAError(DMA_HandleTypeDef * hdma)6617 void TIM_DMAError(DMA_HandleTypeDef *hdma)
6618 {
6619 TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
6620
6621 if (hdma == htim->hdma[TIM_DMA_ID_CC1])
6622 {
6623 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
6624 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
6625 }
6626 else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
6627 {
6628 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
6629 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
6630 }
6631 else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
6632 {
6633 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
6634 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
6635 }
6636 else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
6637 {
6638 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
6639 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
6640 }
6641 else
6642 {
6643 htim->State = HAL_TIM_STATE_READY;
6644 }
6645
6646 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
6647 htim->ErrorCallback(htim);
6648 #else
6649 HAL_TIM_ErrorCallback(htim);
6650 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6651
6652 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
6653 }
6654
6655 /**
6656 * @brief TIM DMA Delay Pulse complete callback.
6657 * @param hdma pointer to DMA handle.
6658 * @retval None
6659 */
TIM_DMADelayPulseCplt(DMA_HandleTypeDef * hdma)6660 static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
6661 {
6662 TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
6663
6664 if (hdma == htim->hdma[TIM_DMA_ID_CC1])
6665 {
6666 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
6667
6668 if (hdma->Init.Mode == DMA_NORMAL)
6669 {
6670 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
6671 }
6672 }
6673 else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
6674 {
6675 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
6676
6677 if (hdma->Init.Mode == DMA_NORMAL)
6678 {
6679 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
6680 }
6681 }
6682 else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
6683 {
6684 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
6685
6686 if (hdma->Init.Mode == DMA_NORMAL)
6687 {
6688 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
6689 }
6690 }
6691 else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
6692 {
6693 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
6694
6695 if (hdma->Init.Mode == DMA_NORMAL)
6696 {
6697 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
6698 }
6699 }
6700 else
6701 {
6702 /* nothing to do */
6703 }
6704
6705 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
6706 htim->PWM_PulseFinishedCallback(htim);
6707 #else
6708 HAL_TIM_PWM_PulseFinishedCallback(htim);
6709 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6710
6711 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
6712 }
6713
6714 /**
6715 * @brief TIM DMA Delay Pulse half complete callback.
6716 * @param hdma pointer to DMA handle.
6717 * @retval None
6718 */
TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef * hdma)6719 void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma)
6720 {
6721 TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
6722
6723 if (hdma == htim->hdma[TIM_DMA_ID_CC1])
6724 {
6725 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
6726 }
6727 else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
6728 {
6729 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
6730 }
6731 else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
6732 {
6733 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
6734 }
6735 else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
6736 {
6737 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
6738 }
6739 else
6740 {
6741 /* nothing to do */
6742 }
6743
6744 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
6745 htim->PWM_PulseFinishedHalfCpltCallback(htim);
6746 #else
6747 HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim);
6748 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6749
6750 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
6751 }
6752
6753 /**
6754 * @brief TIM DMA Capture complete callback.
6755 * @param hdma pointer to DMA handle.
6756 * @retval None
6757 */
TIM_DMACaptureCplt(DMA_HandleTypeDef * hdma)6758 void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
6759 {
6760 TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
6761
6762 if (hdma == htim->hdma[TIM_DMA_ID_CC1])
6763 {
6764 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
6765
6766 if (hdma->Init.Mode == DMA_NORMAL)
6767 {
6768 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
6769 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
6770 }
6771 }
6772 else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
6773 {
6774 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
6775
6776 if (hdma->Init.Mode == DMA_NORMAL)
6777 {
6778 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
6779 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
6780 }
6781 }
6782 else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
6783 {
6784 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
6785
6786 if (hdma->Init.Mode == DMA_NORMAL)
6787 {
6788 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
6789 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
6790 }
6791 }
6792 else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
6793 {
6794 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
6795
6796 if (hdma->Init.Mode == DMA_NORMAL)
6797 {
6798 TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
6799 TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
6800 }
6801 }
6802 else
6803 {
6804 /* nothing to do */
6805 }
6806
6807 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
6808 htim->IC_CaptureCallback(htim);
6809 #else
6810 HAL_TIM_IC_CaptureCallback(htim);
6811 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6812
6813 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
6814 }
6815
6816 /**
6817 * @brief TIM DMA Capture half complete callback.
6818 * @param hdma pointer to DMA handle.
6819 * @retval None
6820 */
TIM_DMACaptureHalfCplt(DMA_HandleTypeDef * hdma)6821 void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma)
6822 {
6823 TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
6824
6825 if (hdma == htim->hdma[TIM_DMA_ID_CC1])
6826 {
6827 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
6828 }
6829 else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
6830 {
6831 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
6832 }
6833 else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
6834 {
6835 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
6836 }
6837 else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
6838 {
6839 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
6840 }
6841 else
6842 {
6843 /* nothing to do */
6844 }
6845
6846 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
6847 htim->IC_CaptureHalfCpltCallback(htim);
6848 #else
6849 HAL_TIM_IC_CaptureHalfCpltCallback(htim);
6850 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6851
6852 htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
6853 }
6854
6855 /**
6856 * @brief TIM DMA Period Elapse complete callback.
6857 * @param hdma pointer to DMA handle.
6858 * @retval None
6859 */
TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef * hdma)6860 static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
6861 {
6862 TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
6863
6864 if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL)
6865 {
6866 htim->State = HAL_TIM_STATE_READY;
6867 }
6868
6869 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
6870 htim->PeriodElapsedCallback(htim);
6871 #else
6872 HAL_TIM_PeriodElapsedCallback(htim);
6873 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6874 }
6875
6876 /**
6877 * @brief TIM DMA Period Elapse half complete callback.
6878 * @param hdma pointer to DMA handle.
6879 * @retval None
6880 */
TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef * hdma)6881 static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma)
6882 {
6883 TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
6884
6885 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
6886 htim->PeriodElapsedHalfCpltCallback(htim);
6887 #else
6888 HAL_TIM_PeriodElapsedHalfCpltCallback(htim);
6889 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6890 }
6891
6892 /**
6893 * @brief TIM DMA Trigger callback.
6894 * @param hdma pointer to DMA handle.
6895 * @retval None
6896 */
TIM_DMATriggerCplt(DMA_HandleTypeDef * hdma)6897 static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
6898 {
6899 TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
6900
6901 if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL)
6902 {
6903 htim->State = HAL_TIM_STATE_READY;
6904 }
6905
6906 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
6907 htim->TriggerCallback(htim);
6908 #else
6909 HAL_TIM_TriggerCallback(htim);
6910 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6911 }
6912
6913 /**
6914 * @brief TIM DMA Trigger half complete callback.
6915 * @param hdma pointer to DMA handle.
6916 * @retval None
6917 */
TIM_DMATriggerHalfCplt(DMA_HandleTypeDef * hdma)6918 static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma)
6919 {
6920 TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
6921
6922 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
6923 htim->TriggerHalfCpltCallback(htim);
6924 #else
6925 HAL_TIM_TriggerHalfCpltCallback(htim);
6926 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
6927 }
6928
6929 /**
6930 * @brief Time Base configuration
6931 * @param TIMx TIM peripheral
6932 * @param Structure TIM Base configuration structure
6933 * @retval None
6934 */
TIM_Base_SetConfig(TIM_TypeDef * TIMx,const TIM_Base_InitTypeDef * Structure)6935 void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure)
6936 {
6937 uint32_t tmpcr1;
6938 tmpcr1 = TIMx->CR1;
6939
6940 /* Set TIM Time Base Unit parameters ---------------------------------------*/
6941 if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx))
6942 {
6943 /* Select the Counter Mode */
6944 tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
6945 tmpcr1 |= Structure->CounterMode;
6946 }
6947
6948 if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx))
6949 {
6950 /* Set the clock division */
6951 tmpcr1 &= ~TIM_CR1_CKD;
6952 tmpcr1 |= (uint32_t)Structure->ClockDivision;
6953 }
6954
6955 /* Set the auto-reload preload */
6956 MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload);
6957
6958 TIMx->CR1 = tmpcr1;
6959
6960 /* Set the Autoreload value */
6961 TIMx->ARR = (uint32_t)Structure->Period ;
6962
6963 /* Set the Prescaler value */
6964 TIMx->PSC = Structure->Prescaler;
6965
6966 if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx))
6967 {
6968 /* Set the Repetition Counter value */
6969 TIMx->RCR = Structure->RepetitionCounter;
6970 }
6971
6972 /* Generate an update event to reload the Prescaler
6973 and the repetition counter (only for advanced timer) value immediately */
6974 TIMx->EGR = TIM_EGR_UG;
6975
6976 /* Check if the update flag is set after the Update Generation, if so clear the UIF flag */
6977 if (HAL_IS_BIT_SET(TIMx->SR, TIM_FLAG_UPDATE))
6978 {
6979 /* Clear the update flag */
6980 CLEAR_BIT(TIMx->SR, TIM_FLAG_UPDATE);
6981 }
6982 }
6983
6984 /**
6985 * @brief Timer Output Compare 1 configuration
6986 * @param TIMx to select the TIM peripheral
6987 * @param OC_Config The output configuration structure
6988 * @retval None
6989 */
TIM_OC1_SetConfig(TIM_TypeDef * TIMx,const TIM_OC_InitTypeDef * OC_Config)6990 static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config)
6991 {
6992 uint32_t tmpccmrx;
6993 uint32_t tmpccer;
6994 uint32_t tmpcr2;
6995
6996 /* Get the TIMx CCER register value */
6997 tmpccer = TIMx->CCER;
6998
6999 /* Disable the Channel 1: Reset the CC1E Bit */
7000 TIMx->CCER &= ~TIM_CCER_CC1E;
7001
7002 /* Get the TIMx CR2 register value */
7003 tmpcr2 = TIMx->CR2;
7004
7005 /* Get the TIMx CCMR1 register value */
7006 tmpccmrx = TIMx->CCMR1;
7007
7008 /* Reset the Output Compare Mode Bits */
7009 tmpccmrx &= ~TIM_CCMR1_OC1M;
7010 tmpccmrx &= ~TIM_CCMR1_CC1S;
7011 /* Select the Output Compare Mode */
7012 tmpccmrx |= OC_Config->OCMode;
7013
7014 /* Reset the Output Polarity level */
7015 tmpccer &= ~TIM_CCER_CC1P;
7016 /* Set the Output Compare Polarity */
7017 tmpccer |= OC_Config->OCPolarity;
7018
7019 if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1))
7020 {
7021 /* Check parameters */
7022 assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
7023
7024 /* Reset the Output N Polarity level */
7025 tmpccer &= ~TIM_CCER_CC1NP;
7026 /* Set the Output N Polarity */
7027 tmpccer |= OC_Config->OCNPolarity;
7028 /* Reset the Output N State */
7029 tmpccer &= ~TIM_CCER_CC1NE;
7030 }
7031
7032 if (IS_TIM_BREAK_INSTANCE(TIMx))
7033 {
7034 /* Check parameters */
7035 assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
7036 assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
7037
7038 /* Reset the Output Compare and Output Compare N IDLE State */
7039 tmpcr2 &= ~TIM_CR2_OIS1;
7040 tmpcr2 &= ~TIM_CR2_OIS1N;
7041 /* Set the Output Idle state */
7042 tmpcr2 |= OC_Config->OCIdleState;
7043 /* Set the Output N Idle state */
7044 tmpcr2 |= OC_Config->OCNIdleState;
7045 }
7046
7047 /* Write to TIMx CR2 */
7048 TIMx->CR2 = tmpcr2;
7049
7050 /* Write to TIMx CCMR1 */
7051 TIMx->CCMR1 = tmpccmrx;
7052
7053 /* Set the Capture Compare Register value */
7054 TIMx->CCR1 = OC_Config->Pulse;
7055
7056 /* Write to TIMx CCER */
7057 TIMx->CCER = tmpccer;
7058 }
7059
7060 /**
7061 * @brief Timer Output Compare 2 configuration
7062 * @param TIMx to select the TIM peripheral
7063 * @param OC_Config The output configuration structure
7064 * @retval None
7065 */
TIM_OC2_SetConfig(TIM_TypeDef * TIMx,const TIM_OC_InitTypeDef * OC_Config)7066 void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config)
7067 {
7068 uint32_t tmpccmrx;
7069 uint32_t tmpccer;
7070 uint32_t tmpcr2;
7071
7072 /* Get the TIMx CCER register value */
7073 tmpccer = TIMx->CCER;
7074
7075 /* Disable the Channel 2: Reset the CC2E Bit */
7076 TIMx->CCER &= ~TIM_CCER_CC2E;
7077
7078 /* Get the TIMx CR2 register value */
7079 tmpcr2 = TIMx->CR2;
7080
7081 /* Get the TIMx CCMR1 register value */
7082 tmpccmrx = TIMx->CCMR1;
7083
7084 /* Reset the Output Compare mode and Capture/Compare selection Bits */
7085 tmpccmrx &= ~TIM_CCMR1_OC2M;
7086 tmpccmrx &= ~TIM_CCMR1_CC2S;
7087
7088 /* Select the Output Compare Mode */
7089 tmpccmrx |= (OC_Config->OCMode << 8U);
7090
7091 /* Reset the Output Polarity level */
7092 tmpccer &= ~TIM_CCER_CC2P;
7093 /* Set the Output Compare Polarity */
7094 tmpccer |= (OC_Config->OCPolarity << 4U);
7095
7096 if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2))
7097 {
7098 assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
7099
7100 /* Reset the Output N Polarity level */
7101 tmpccer &= ~TIM_CCER_CC2NP;
7102 /* Set the Output N Polarity */
7103 tmpccer |= (OC_Config->OCNPolarity << 4U);
7104 /* Reset the Output N State */
7105 tmpccer &= ~TIM_CCER_CC2NE;
7106 }
7107
7108 if (IS_TIM_BREAK_INSTANCE(TIMx))
7109 {
7110 /* Check parameters */
7111 assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
7112 assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
7113
7114 /* Reset the Output Compare and Output Compare N IDLE State */
7115 tmpcr2 &= ~TIM_CR2_OIS2;
7116 tmpcr2 &= ~TIM_CR2_OIS2N;
7117 /* Set the Output Idle state */
7118 tmpcr2 |= (OC_Config->OCIdleState << 2U);
7119 /* Set the Output N Idle state */
7120 tmpcr2 |= (OC_Config->OCNIdleState << 2U);
7121 }
7122
7123 /* Write to TIMx CR2 */
7124 TIMx->CR2 = tmpcr2;
7125
7126 /* Write to TIMx CCMR1 */
7127 TIMx->CCMR1 = tmpccmrx;
7128
7129 /* Set the Capture Compare Register value */
7130 TIMx->CCR2 = OC_Config->Pulse;
7131
7132 /* Write to TIMx CCER */
7133 TIMx->CCER = tmpccer;
7134 }
7135
7136 /**
7137 * @brief Timer Output Compare 3 configuration
7138 * @param TIMx to select the TIM peripheral
7139 * @param OC_Config The output configuration structure
7140 * @retval None
7141 */
TIM_OC3_SetConfig(TIM_TypeDef * TIMx,const TIM_OC_InitTypeDef * OC_Config)7142 static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config)
7143 {
7144 uint32_t tmpccmrx;
7145 uint32_t tmpccer;
7146 uint32_t tmpcr2;
7147
7148 /* Get the TIMx CCER register value */
7149 tmpccer = TIMx->CCER;
7150
7151 /* Disable the Channel 3: Reset the CC2E Bit */
7152 TIMx->CCER &= ~TIM_CCER_CC3E;
7153
7154 /* Get the TIMx CR2 register value */
7155 tmpcr2 = TIMx->CR2;
7156
7157 /* Get the TIMx CCMR2 register value */
7158 tmpccmrx = TIMx->CCMR2;
7159
7160 /* Reset the Output Compare mode and Capture/Compare selection Bits */
7161 tmpccmrx &= ~TIM_CCMR2_OC3M;
7162 tmpccmrx &= ~TIM_CCMR2_CC3S;
7163 /* Select the Output Compare Mode */
7164 tmpccmrx |= OC_Config->OCMode;
7165
7166 /* Reset the Output Polarity level */
7167 tmpccer &= ~TIM_CCER_CC3P;
7168 /* Set the Output Compare Polarity */
7169 tmpccer |= (OC_Config->OCPolarity << 8U);
7170
7171 if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3))
7172 {
7173 assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
7174
7175 /* Reset the Output N Polarity level */
7176 tmpccer &= ~TIM_CCER_CC3NP;
7177 /* Set the Output N Polarity */
7178 tmpccer |= (OC_Config->OCNPolarity << 8U);
7179 /* Reset the Output N State */
7180 tmpccer &= ~TIM_CCER_CC3NE;
7181 }
7182
7183 if (IS_TIM_BREAK_INSTANCE(TIMx))
7184 {
7185 /* Check parameters */
7186 assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
7187 assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
7188
7189 /* Reset the Output Compare and Output Compare N IDLE State */
7190 tmpcr2 &= ~TIM_CR2_OIS3;
7191 tmpcr2 &= ~TIM_CR2_OIS3N;
7192 /* Set the Output Idle state */
7193 tmpcr2 |= (OC_Config->OCIdleState << 4U);
7194 /* Set the Output N Idle state */
7195 tmpcr2 |= (OC_Config->OCNIdleState << 4U);
7196 }
7197
7198 /* Write to TIMx CR2 */
7199 TIMx->CR2 = tmpcr2;
7200
7201 /* Write to TIMx CCMR2 */
7202 TIMx->CCMR2 = tmpccmrx;
7203
7204 /* Set the Capture Compare Register value */
7205 TIMx->CCR3 = OC_Config->Pulse;
7206
7207 /* Write to TIMx CCER */
7208 TIMx->CCER = tmpccer;
7209 }
7210
7211 /**
7212 * @brief Timer Output Compare 4 configuration
7213 * @param TIMx to select the TIM peripheral
7214 * @param OC_Config The output configuration structure
7215 * @retval None
7216 */
TIM_OC4_SetConfig(TIM_TypeDef * TIMx,const TIM_OC_InitTypeDef * OC_Config)7217 static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config)
7218 {
7219 uint32_t tmpccmrx;
7220 uint32_t tmpccer;
7221 uint32_t tmpcr2;
7222
7223 /* Get the TIMx CCER register value */
7224 tmpccer = TIMx->CCER;
7225
7226 /* Disable the Channel 4: Reset the CC4E Bit */
7227 TIMx->CCER &= ~TIM_CCER_CC4E;
7228
7229 /* Get the TIMx CR2 register value */
7230 tmpcr2 = TIMx->CR2;
7231
7232 /* Get the TIMx CCMR2 register value */
7233 tmpccmrx = TIMx->CCMR2;
7234
7235 /* Reset the Output Compare mode and Capture/Compare selection Bits */
7236 tmpccmrx &= ~TIM_CCMR2_OC4M;
7237 tmpccmrx &= ~TIM_CCMR2_CC4S;
7238
7239 /* Select the Output Compare Mode */
7240 tmpccmrx |= (OC_Config->OCMode << 8U);
7241
7242 /* Reset the Output Polarity level */
7243 tmpccer &= ~TIM_CCER_CC4P;
7244 /* Set the Output Compare Polarity */
7245 tmpccer |= (OC_Config->OCPolarity << 12U);
7246
7247 if (IS_TIM_BREAK_INSTANCE(TIMx))
7248 {
7249 /* Check parameters */
7250 assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
7251
7252 /* Reset the Output Compare IDLE State */
7253 tmpcr2 &= ~TIM_CR2_OIS4;
7254
7255 /* Set the Output Idle state */
7256 tmpcr2 |= (OC_Config->OCIdleState << 6U);
7257 }
7258
7259 /* Write to TIMx CR2 */
7260 TIMx->CR2 = tmpcr2;
7261
7262 /* Write to TIMx CCMR2 */
7263 TIMx->CCMR2 = tmpccmrx;
7264
7265 /* Set the Capture Compare Register value */
7266 TIMx->CCR4 = OC_Config->Pulse;
7267
7268 /* Write to TIMx CCER */
7269 TIMx->CCER = tmpccer;
7270 }
7271
7272 /**
7273 * @brief Timer Output Compare 5 configuration
7274 * @param TIMx to select the TIM peripheral
7275 * @param OC_Config The output configuration structure
7276 * @retval None
7277 */
TIM_OC5_SetConfig(TIM_TypeDef * TIMx,const TIM_OC_InitTypeDef * OC_Config)7278 static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx,
7279 const TIM_OC_InitTypeDef *OC_Config)
7280 {
7281 uint32_t tmpccmrx;
7282 uint32_t tmpccer;
7283 uint32_t tmpcr2;
7284
7285 /* Get the TIMx CCER register value */
7286 tmpccer = TIMx->CCER;
7287
7288 /* Disable the output: Reset the CCxE Bit */
7289 TIMx->CCER &= ~TIM_CCER_CC5E;
7290
7291 /* Get the TIMx CR2 register value */
7292 tmpcr2 = TIMx->CR2;
7293 /* Get the TIMx CCMR1 register value */
7294 tmpccmrx = TIMx->CCMR3;
7295
7296 /* Reset the Output Compare Mode Bits */
7297 tmpccmrx &= ~(TIM_CCMR3_OC5M);
7298 /* Select the Output Compare Mode */
7299 tmpccmrx |= OC_Config->OCMode;
7300
7301 /* Reset the Output Polarity level */
7302 tmpccer &= ~TIM_CCER_CC5P;
7303 /* Set the Output Compare Polarity */
7304 tmpccer |= (OC_Config->OCPolarity << 16U);
7305
7306 if (IS_TIM_BREAK_INSTANCE(TIMx))
7307 {
7308 /* Reset the Output Compare IDLE State */
7309 tmpcr2 &= ~TIM_CR2_OIS5;
7310 /* Set the Output Idle state */
7311 tmpcr2 |= (OC_Config->OCIdleState << 8U);
7312 }
7313 /* Write to TIMx CR2 */
7314 TIMx->CR2 = tmpcr2;
7315
7316 /* Write to TIMx CCMR3 */
7317 TIMx->CCMR3 = tmpccmrx;
7318
7319 /* Set the Capture Compare Register value */
7320 TIMx->CCR5 = OC_Config->Pulse;
7321
7322 /* Write to TIMx CCER */
7323 TIMx->CCER = tmpccer;
7324 }
7325
7326 /**
7327 * @brief Timer Output Compare 6 configuration
7328 * @param TIMx to select the TIM peripheral
7329 * @param OC_Config The output configuration structure
7330 * @retval None
7331 */
TIM_OC6_SetConfig(TIM_TypeDef * TIMx,const TIM_OC_InitTypeDef * OC_Config)7332 static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx,
7333 const TIM_OC_InitTypeDef *OC_Config)
7334 {
7335 uint32_t tmpccmrx;
7336 uint32_t tmpccer;
7337 uint32_t tmpcr2;
7338
7339 /* Get the TIMx CCER register value */
7340 tmpccer = TIMx->CCER;
7341
7342 /* Disable the output: Reset the CCxE Bit */
7343 TIMx->CCER &= ~TIM_CCER_CC6E;
7344
7345 /* Get the TIMx CR2 register value */
7346 tmpcr2 = TIMx->CR2;
7347 /* Get the TIMx CCMR1 register value */
7348 tmpccmrx = TIMx->CCMR3;
7349
7350 /* Reset the Output Compare Mode Bits */
7351 tmpccmrx &= ~(TIM_CCMR3_OC6M);
7352 /* Select the Output Compare Mode */
7353 tmpccmrx |= (OC_Config->OCMode << 8U);
7354
7355 /* Reset the Output Polarity level */
7356 tmpccer &= (uint32_t)~TIM_CCER_CC6P;
7357 /* Set the Output Compare Polarity */
7358 tmpccer |= (OC_Config->OCPolarity << 20U);
7359
7360 if (IS_TIM_BREAK_INSTANCE(TIMx))
7361 {
7362 /* Reset the Output Compare IDLE State */
7363 tmpcr2 &= ~TIM_CR2_OIS6;
7364 /* Set the Output Idle state */
7365 tmpcr2 |= (OC_Config->OCIdleState << 10U);
7366 }
7367
7368 /* Write to TIMx CR2 */
7369 TIMx->CR2 = tmpcr2;
7370
7371 /* Write to TIMx CCMR3 */
7372 TIMx->CCMR3 = tmpccmrx;
7373
7374 /* Set the Capture Compare Register value */
7375 TIMx->CCR6 = OC_Config->Pulse;
7376
7377 /* Write to TIMx CCER */
7378 TIMx->CCER = tmpccer;
7379 }
7380
7381 /**
7382 * @brief Slave Timer configuration function
7383 * @param htim TIM handle
7384 * @param sSlaveConfig Slave timer configuration
7385 * @retval None
7386 */
TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef * htim,const TIM_SlaveConfigTypeDef * sSlaveConfig)7387 static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
7388 const TIM_SlaveConfigTypeDef *sSlaveConfig)
7389 {
7390 HAL_StatusTypeDef status = HAL_OK;
7391 uint32_t tmpsmcr;
7392 uint32_t tmpccmr1;
7393 uint32_t tmpccer;
7394
7395 /* Get the TIMx SMCR register value */
7396 tmpsmcr = htim->Instance->SMCR;
7397
7398 /* Reset the Trigger Selection Bits */
7399 tmpsmcr &= ~TIM_SMCR_TS;
7400 /* Set the Input Trigger source */
7401 tmpsmcr |= sSlaveConfig->InputTrigger;
7402
7403 /* Reset the slave mode Bits */
7404 tmpsmcr &= ~TIM_SMCR_SMS;
7405 /* Set the slave mode */
7406 tmpsmcr |= sSlaveConfig->SlaveMode;
7407
7408 /* Write to TIMx SMCR */
7409 htim->Instance->SMCR = tmpsmcr;
7410
7411 /* Configure the trigger prescaler, filter, and polarity */
7412 switch (sSlaveConfig->InputTrigger)
7413 {
7414 case TIM_TS_ETRF:
7415 {
7416 /* Check the parameters */
7417 assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
7418 assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
7419 assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
7420 assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
7421 /* Configure the ETR Trigger source */
7422 TIM_ETR_SetConfig(htim->Instance,
7423 sSlaveConfig->TriggerPrescaler,
7424 sSlaveConfig->TriggerPolarity,
7425 sSlaveConfig->TriggerFilter);
7426 break;
7427 }
7428
7429 case TIM_TS_TI1F_ED:
7430 {
7431 /* Check the parameters */
7432 assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
7433 assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
7434
7435 if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED)
7436 {
7437 return HAL_ERROR;
7438 }
7439
7440 /* Disable the Channel 1: Reset the CC1E Bit */
7441 tmpccer = htim->Instance->CCER;
7442 htim->Instance->CCER &= ~TIM_CCER_CC1E;
7443 tmpccmr1 = htim->Instance->CCMR1;
7444
7445 /* Set the filter */
7446 tmpccmr1 &= ~TIM_CCMR1_IC1F;
7447 tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U);
7448
7449 /* Write to TIMx CCMR1 and CCER registers */
7450 htim->Instance->CCMR1 = tmpccmr1;
7451 htim->Instance->CCER = tmpccer;
7452 break;
7453 }
7454
7455 case TIM_TS_TI1FP1:
7456 {
7457 /* Check the parameters */
7458 assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
7459 assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
7460 assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
7461
7462 /* Configure TI1 Filter and Polarity */
7463 TIM_TI1_ConfigInputStage(htim->Instance,
7464 sSlaveConfig->TriggerPolarity,
7465 sSlaveConfig->TriggerFilter);
7466 break;
7467 }
7468
7469 case TIM_TS_TI2FP2:
7470 {
7471 /* Check the parameters */
7472 assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
7473 assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
7474 assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
7475
7476 /* Configure TI2 Filter and Polarity */
7477 TIM_TI2_ConfigInputStage(htim->Instance,
7478 sSlaveConfig->TriggerPolarity,
7479 sSlaveConfig->TriggerFilter);
7480 break;
7481 }
7482
7483 case TIM_TS_ITR0:
7484 case TIM_TS_ITR1:
7485 case TIM_TS_ITR2:
7486 case TIM_TS_ITR3:
7487 {
7488 /* Check the parameter */
7489 assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
7490 break;
7491 }
7492
7493 default:
7494 status = HAL_ERROR;
7495 break;
7496 }
7497
7498 return status;
7499 }
7500
7501 /**
7502 * @brief Configure the TI1 as Input.
7503 * @param TIMx to select the TIM peripheral.
7504 * @param TIM_ICPolarity The Input Polarity.
7505 * This parameter can be one of the following values:
7506 * @arg TIM_ICPOLARITY_RISING
7507 * @arg TIM_ICPOLARITY_FALLING
7508 * @arg TIM_ICPOLARITY_BOTHEDGE
7509 * @param TIM_ICSelection specifies the input to be used.
7510 * This parameter can be one of the following values:
7511 * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1.
7512 * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2.
7513 * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC.
7514 * @param TIM_ICFilter Specifies the Input Capture Filter.
7515 * This parameter must be a value between 0x00 and 0x0F.
7516 * @retval None
7517 * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
7518 * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
7519 * protected against un-initialized filter and polarity values.
7520 */
TIM_TI1_SetConfig(TIM_TypeDef * TIMx,uint32_t TIM_ICPolarity,uint32_t TIM_ICSelection,uint32_t TIM_ICFilter)7521 void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
7522 uint32_t TIM_ICFilter)
7523 {
7524 uint32_t tmpccmr1;
7525 uint32_t tmpccer;
7526
7527 /* Disable the Channel 1: Reset the CC1E Bit */
7528 tmpccer = TIMx->CCER;
7529 TIMx->CCER &= ~TIM_CCER_CC1E;
7530 tmpccmr1 = TIMx->CCMR1;
7531
7532 /* Select the Input */
7533 if (IS_TIM_CC2_INSTANCE(TIMx) != RESET)
7534 {
7535 tmpccmr1 &= ~TIM_CCMR1_CC1S;
7536 tmpccmr1 |= TIM_ICSelection;
7537 }
7538 else
7539 {
7540 tmpccmr1 |= TIM_CCMR1_CC1S_0;
7541 }
7542
7543 /* Set the filter */
7544 tmpccmr1 &= ~TIM_CCMR1_IC1F;
7545 tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F);
7546
7547 /* Select the Polarity and set the CC1E Bit */
7548 tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
7549 tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
7550
7551 /* Write to TIMx CCMR1 and CCER registers */
7552 TIMx->CCMR1 = tmpccmr1;
7553 TIMx->CCER = tmpccer;
7554 }
7555
7556 /**
7557 * @brief Configure the Polarity and Filter for TI1.
7558 * @param TIMx to select the TIM peripheral.
7559 * @param TIM_ICPolarity The Input Polarity.
7560 * This parameter can be one of the following values:
7561 * @arg TIM_ICPOLARITY_RISING
7562 * @arg TIM_ICPOLARITY_FALLING
7563 * @arg TIM_ICPOLARITY_BOTHEDGE
7564 * @param TIM_ICFilter Specifies the Input Capture Filter.
7565 * This parameter must be a value between 0x00 and 0x0F.
7566 * @retval None
7567 */
TIM_TI1_ConfigInputStage(TIM_TypeDef * TIMx,uint32_t TIM_ICPolarity,uint32_t TIM_ICFilter)7568 static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
7569 {
7570 uint32_t tmpccmr1;
7571 uint32_t tmpccer;
7572
7573 /* Disable the Channel 1: Reset the CC1E Bit */
7574 tmpccer = TIMx->CCER;
7575 TIMx->CCER &= ~TIM_CCER_CC1E;
7576 tmpccmr1 = TIMx->CCMR1;
7577
7578 /* Set the filter */
7579 tmpccmr1 &= ~TIM_CCMR1_IC1F;
7580 tmpccmr1 |= (TIM_ICFilter << 4U);
7581
7582 /* Select the Polarity and set the CC1E Bit */
7583 tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
7584 tmpccer |= TIM_ICPolarity;
7585
7586 /* Write to TIMx CCMR1 and CCER registers */
7587 TIMx->CCMR1 = tmpccmr1;
7588 TIMx->CCER = tmpccer;
7589 }
7590
7591 /**
7592 * @brief Configure the TI2 as Input.
7593 * @param TIMx to select the TIM peripheral
7594 * @param TIM_ICPolarity The Input Polarity.
7595 * This parameter can be one of the following values:
7596 * @arg TIM_ICPOLARITY_RISING
7597 * @arg TIM_ICPOLARITY_FALLING
7598 * @arg TIM_ICPOLARITY_BOTHEDGE
7599 * @param TIM_ICSelection specifies the input to be used.
7600 * This parameter can be one of the following values:
7601 * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2.
7602 * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1.
7603 * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC.
7604 * @param TIM_ICFilter Specifies the Input Capture Filter.
7605 * This parameter must be a value between 0x00 and 0x0F.
7606 * @retval None
7607 * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
7608 * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
7609 * protected against un-initialized filter and polarity values.
7610 */
TIM_TI2_SetConfig(TIM_TypeDef * TIMx,uint32_t TIM_ICPolarity,uint32_t TIM_ICSelection,uint32_t TIM_ICFilter)7611 static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
7612 uint32_t TIM_ICFilter)
7613 {
7614 uint32_t tmpccmr1;
7615 uint32_t tmpccer;
7616
7617 /* Disable the Channel 2: Reset the CC2E Bit */
7618 tmpccer = TIMx->CCER;
7619 TIMx->CCER &= ~TIM_CCER_CC2E;
7620 tmpccmr1 = TIMx->CCMR1;
7621
7622 /* Select the Input */
7623 tmpccmr1 &= ~TIM_CCMR1_CC2S;
7624 tmpccmr1 |= (TIM_ICSelection << 8U);
7625
7626 /* Set the filter */
7627 tmpccmr1 &= ~TIM_CCMR1_IC2F;
7628 tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F);
7629
7630 /* Select the Polarity and set the CC2E Bit */
7631 tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
7632 tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
7633
7634 /* Write to TIMx CCMR1 and CCER registers */
7635 TIMx->CCMR1 = tmpccmr1 ;
7636 TIMx->CCER = tmpccer;
7637 }
7638
7639 /**
7640 * @brief Configure the Polarity and Filter for TI2.
7641 * @param TIMx to select the TIM peripheral.
7642 * @param TIM_ICPolarity The Input Polarity.
7643 * This parameter can be one of the following values:
7644 * @arg TIM_ICPOLARITY_RISING
7645 * @arg TIM_ICPOLARITY_FALLING
7646 * @arg TIM_ICPOLARITY_BOTHEDGE
7647 * @param TIM_ICFilter Specifies the Input Capture Filter.
7648 * This parameter must be a value between 0x00 and 0x0F.
7649 * @retval None
7650 */
TIM_TI2_ConfigInputStage(TIM_TypeDef * TIMx,uint32_t TIM_ICPolarity,uint32_t TIM_ICFilter)7651 static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
7652 {
7653 uint32_t tmpccmr1;
7654 uint32_t tmpccer;
7655
7656 /* Disable the Channel 2: Reset the CC2E Bit */
7657 tmpccer = TIMx->CCER;
7658 TIMx->CCER &= ~TIM_CCER_CC2E;
7659 tmpccmr1 = TIMx->CCMR1;
7660
7661 /* Set the filter */
7662 tmpccmr1 &= ~TIM_CCMR1_IC2F;
7663 tmpccmr1 |= (TIM_ICFilter << 12U);
7664
7665 /* Select the Polarity and set the CC2E Bit */
7666 tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
7667 tmpccer |= (TIM_ICPolarity << 4U);
7668
7669 /* Write to TIMx CCMR1 and CCER registers */
7670 TIMx->CCMR1 = tmpccmr1 ;
7671 TIMx->CCER = tmpccer;
7672 }
7673
7674 /**
7675 * @brief Configure the TI3 as Input.
7676 * @param TIMx to select the TIM peripheral
7677 * @param TIM_ICPolarity The Input Polarity.
7678 * This parameter can be one of the following values:
7679 * @arg TIM_ICPOLARITY_RISING
7680 * @arg TIM_ICPOLARITY_FALLING
7681 * @arg TIM_ICPOLARITY_BOTHEDGE
7682 * @param TIM_ICSelection specifies the input to be used.
7683 * This parameter can be one of the following values:
7684 * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3.
7685 * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4.
7686 * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC.
7687 * @param TIM_ICFilter Specifies the Input Capture Filter.
7688 * This parameter must be a value between 0x00 and 0x0F.
7689 * @retval None
7690 * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
7691 * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
7692 * protected against un-initialized filter and polarity values.
7693 */
TIM_TI3_SetConfig(TIM_TypeDef * TIMx,uint32_t TIM_ICPolarity,uint32_t TIM_ICSelection,uint32_t TIM_ICFilter)7694 static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
7695 uint32_t TIM_ICFilter)
7696 {
7697 uint32_t tmpccmr2;
7698 uint32_t tmpccer;
7699
7700 /* Disable the Channel 3: Reset the CC3E Bit */
7701 tmpccer = TIMx->CCER;
7702 TIMx->CCER &= ~TIM_CCER_CC3E;
7703 tmpccmr2 = TIMx->CCMR2;
7704
7705 /* Select the Input */
7706 tmpccmr2 &= ~TIM_CCMR2_CC3S;
7707 tmpccmr2 |= TIM_ICSelection;
7708
7709 /* Set the filter */
7710 tmpccmr2 &= ~TIM_CCMR2_IC3F;
7711 tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F);
7712
7713 /* Select the Polarity and set the CC3E Bit */
7714 tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
7715 tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
7716
7717 /* Write to TIMx CCMR2 and CCER registers */
7718 TIMx->CCMR2 = tmpccmr2;
7719 TIMx->CCER = tmpccer;
7720 }
7721
7722 /**
7723 * @brief Configure the TI4 as Input.
7724 * @param TIMx to select the TIM peripheral
7725 * @param TIM_ICPolarity The Input Polarity.
7726 * This parameter can be one of the following values:
7727 * @arg TIM_ICPOLARITY_RISING
7728 * @arg TIM_ICPOLARITY_FALLING
7729 * @arg TIM_ICPOLARITY_BOTHEDGE
7730 * @param TIM_ICSelection specifies the input to be used.
7731 * This parameter can be one of the following values:
7732 * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4.
7733 * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3.
7734 * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC.
7735 * @param TIM_ICFilter Specifies the Input Capture Filter.
7736 * This parameter must be a value between 0x00 and 0x0F.
7737 * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
7738 * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
7739 * protected against un-initialized filter and polarity values.
7740 * @retval None
7741 */
TIM_TI4_SetConfig(TIM_TypeDef * TIMx,uint32_t TIM_ICPolarity,uint32_t TIM_ICSelection,uint32_t TIM_ICFilter)7742 static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
7743 uint32_t TIM_ICFilter)
7744 {
7745 uint32_t tmpccmr2;
7746 uint32_t tmpccer;
7747
7748 /* Disable the Channel 4: Reset the CC4E Bit */
7749 tmpccer = TIMx->CCER;
7750 TIMx->CCER &= ~TIM_CCER_CC4E;
7751 tmpccmr2 = TIMx->CCMR2;
7752
7753 /* Select the Input */
7754 tmpccmr2 &= ~TIM_CCMR2_CC4S;
7755 tmpccmr2 |= (TIM_ICSelection << 8U);
7756
7757 /* Set the filter */
7758 tmpccmr2 &= ~TIM_CCMR2_IC4F;
7759 tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F);
7760
7761 /* Select the Polarity and set the CC4E Bit */
7762 tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
7763 tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
7764
7765 /* Write to TIMx CCMR2 and CCER registers */
7766 TIMx->CCMR2 = tmpccmr2;
7767 TIMx->CCER = tmpccer ;
7768 }
7769
7770 /**
7771 * @brief Selects the Input Trigger source
7772 * @param TIMx to select the TIM peripheral
7773 * @param InputTriggerSource The Input Trigger source.
7774 * This parameter can be one of the following values:
7775 * @arg TIM_TS_ITR0: Internal Trigger 0
7776 * @arg TIM_TS_ITR1: Internal Trigger 1
7777 * @arg TIM_TS_ITR2: Internal Trigger 2
7778 * @arg TIM_TS_ITR3: Internal Trigger 3
7779 * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
7780 * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
7781 * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
7782 * @arg TIM_TS_ETRF: External Trigger input
7783 * @retval None
7784 */
TIM_ITRx_SetConfig(TIM_TypeDef * TIMx,uint32_t InputTriggerSource)7785 static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource)
7786 {
7787 uint32_t tmpsmcr;
7788
7789 /* Get the TIMx SMCR register value */
7790 tmpsmcr = TIMx->SMCR;
7791 /* Reset the TS Bits */
7792 tmpsmcr &= ~TIM_SMCR_TS;
7793 /* Set the Input Trigger source and the slave mode*/
7794 tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1);
7795 /* Write to TIMx SMCR */
7796 TIMx->SMCR = tmpsmcr;
7797 }
7798 /**
7799 * @brief Configures the TIMx External Trigger (ETR).
7800 * @param TIMx to select the TIM peripheral
7801 * @param TIM_ExtTRGPrescaler The external Trigger Prescaler.
7802 * This parameter can be one of the following values:
7803 * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF.
7804 * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2.
7805 * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4.
7806 * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8.
7807 * @param TIM_ExtTRGPolarity The external Trigger Polarity.
7808 * This parameter can be one of the following values:
7809 * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active.
7810 * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active.
7811 * @param ExtTRGFilter External Trigger Filter.
7812 * This parameter must be a value between 0x00 and 0x0F
7813 * @retval None
7814 */
TIM_ETR_SetConfig(TIM_TypeDef * TIMx,uint32_t TIM_ExtTRGPrescaler,uint32_t TIM_ExtTRGPolarity,uint32_t ExtTRGFilter)7815 void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler,
7816 uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
7817 {
7818 uint32_t tmpsmcr;
7819
7820 tmpsmcr = TIMx->SMCR;
7821
7822 /* Reset the ETR Bits */
7823 tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
7824
7825 /* Set the Prescaler, the Filter value and the Polarity */
7826 tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U)));
7827
7828 /* Write to TIMx SMCR */
7829 TIMx->SMCR = tmpsmcr;
7830 }
7831
7832 /**
7833 * @brief Enables or disables the TIM Capture Compare Channel x.
7834 * @param TIMx to select the TIM peripheral
7835 * @param Channel specifies the TIM Channel
7836 * This parameter can be one of the following values:
7837 * @arg TIM_CHANNEL_1: TIM Channel 1
7838 * @arg TIM_CHANNEL_2: TIM Channel 2
7839 * @arg TIM_CHANNEL_3: TIM Channel 3
7840 * @arg TIM_CHANNEL_4: TIM Channel 4
7841 * @arg TIM_CHANNEL_5: TIM Channel 5 selected
7842 * @arg TIM_CHANNEL_6: TIM Channel 6 selected
7843 * @param ChannelState specifies the TIM Channel CCxE bit new state.
7844 * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE.
7845 * @retval None
7846 */
TIM_CCxChannelCmd(TIM_TypeDef * TIMx,uint32_t Channel,uint32_t ChannelState)7847 void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState)
7848 {
7849 uint32_t tmp;
7850
7851 /* Check the parameters */
7852 assert_param(IS_TIM_CC1_INSTANCE(TIMx));
7853 assert_param(IS_TIM_CHANNELS(Channel));
7854
7855 tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */
7856
7857 /* Reset the CCxE Bit */
7858 TIMx->CCER &= ~tmp;
7859
7860 /* Set or reset the CCxE Bit */
7861 TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */
7862 }
7863
7864 #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
7865 /**
7866 * @brief Reset interrupt callbacks to the legacy weak callbacks.
7867 * @param htim pointer to a TIM_HandleTypeDef structure that contains
7868 * the configuration information for TIM module.
7869 * @retval None
7870 */
TIM_ResetCallback(TIM_HandleTypeDef * htim)7871 void TIM_ResetCallback(TIM_HandleTypeDef *htim)
7872 {
7873 /* Reset the TIM callback to the legacy weak callbacks */
7874 htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback;
7875 htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback;
7876 htim->TriggerCallback = HAL_TIM_TriggerCallback;
7877 htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback;
7878 htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback;
7879 htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback;
7880 htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback;
7881 htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback;
7882 htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback;
7883 htim->ErrorCallback = HAL_TIM_ErrorCallback;
7884 htim->CommutationCallback = HAL_TIMEx_CommutCallback;
7885 htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback;
7886 htim->BreakCallback = HAL_TIMEx_BreakCallback;
7887 htim->Break2Callback = HAL_TIMEx_Break2Callback;
7888 }
7889 #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
7890
7891 /**
7892 * @}
7893 */
7894
7895 #endif /* HAL_TIM_MODULE_ENABLED */
7896 /**
7897 * @}
7898 */
7899
7900 /**
7901 * @}
7902 */
7903
