1 /**
2 ******************************************************************************
3 * @file stm32f4xx_hal.c
4 * @author MCD Application Team
5 * @brief HAL module driver.
6 * This is the common part of the HAL initialization
7 *
8 ******************************************************************************
9 * @attention
10 *
11 * Copyright (c) 2017 STMicroelectronics.
12 * All rights reserved.
13 *
14 * This software is licensed under terms that can be found in the LICENSE file
15 * in the root directory of this software component.
16 * If no LICENSE file comes with this software, it is provided AS-IS.
17 *
18 ******************************************************************************
19 @verbatim
20 ==============================================================================
21 ##### How to use this driver #####
22 ==============================================================================
23 [..]
24 The common HAL driver contains a set of generic and common APIs that can be
25 used by the PPP peripheral drivers and the user to start using the HAL.
26 [..]
27 The HAL contains two APIs' categories:
28 (+) Common HAL APIs
29 (+) Services HAL APIs
30
31 @endverbatim
32 ******************************************************************************
33 */
34
35 /* Includes ------------------------------------------------------------------*/
36 #include "stm32f4xx_hal.h"
37
38 /** @addtogroup STM32F4xx_HAL_Driver
39 * @{
40 */
41
42 /** @defgroup HAL HAL
43 * @brief HAL module driver.
44 * @{
45 */
46
47 /* Private typedef -----------------------------------------------------------*/
48 /* Private define ------------------------------------------------------------*/
49 /** @addtogroup HAL_Private_Constants
50 * @{
51 */
52 /**
53 * @brief STM32F4xx HAL Driver version number V1.8.3
54 */
55 #define __STM32F4xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */
56 #define __STM32F4xx_HAL_VERSION_SUB1 (0x08U) /*!< [23:16] sub1 version */
57 #define __STM32F4xx_HAL_VERSION_SUB2 (0x03U) /*!< [15:8] sub2 version */
58 #define __STM32F4xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */
59 #define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\
60 |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\
61 |(__STM32F4xx_HAL_VERSION_SUB2 << 8U )\
62 |(__STM32F4xx_HAL_VERSION_RC))
63
64 #define IDCODE_DEVID_MASK 0x00000FFFU
65
66 /* ------------ RCC registers bit address in the alias region ----------- */
67 #define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
68 /* --- MEMRMP Register ---*/
69 /* Alias word address of UFB_MODE bit */
70 #define MEMRMP_OFFSET SYSCFG_OFFSET
71 #define UFB_MODE_BIT_NUMBER SYSCFG_MEMRMP_UFB_MODE_Pos
72 #define UFB_MODE_BB (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (UFB_MODE_BIT_NUMBER * 4U))
73
74 /* --- CMPCR Register ---*/
75 /* Alias word address of CMP_PD bit */
76 #define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20U)
77 #define CMP_PD_BIT_NUMBER SYSCFG_CMPCR_CMP_PD_Pos
78 #define CMPCR_CMP_PD_BB (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32U) + (CMP_PD_BIT_NUMBER * 4U))
79
80 /* --- MCHDLYCR Register ---*/
81 /* Alias word address of BSCKSEL bit */
82 #define MCHDLYCR_OFFSET (SYSCFG_OFFSET + 0x30U)
83 #define BSCKSEL_BIT_NUMBER SYSCFG_MCHDLYCR_BSCKSEL_Pos
84 #define MCHDLYCR_BSCKSEL_BB (uint32_t)(PERIPH_BB_BASE + (MCHDLYCR_OFFSET * 32U) + (BSCKSEL_BIT_NUMBER * 4U))
85 /**
86 * @}
87 */
88
89 /* Private macro -------------------------------------------------------------*/
90 /* Private variables ---------------------------------------------------------*/
91 /** @addtogroup HAL_Private_Variables
92 * @{
93 */
94 __IO uint32_t uwTick;
95 uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
96 HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */
97 /**
98 * @}
99 */
100 /* Private function prototypes -----------------------------------------------*/
101 /* Private functions ---------------------------------------------------------*/
102
103 /** @defgroup HAL_Exported_Functions HAL Exported Functions
104 * @{
105 */
106
107 /** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
108 * @brief Initialization and de-initialization functions
109 *
110 @verbatim
111 ===============================================================================
112 ##### Initialization and Configuration functions #####
113 ===============================================================================
114 [..] This section provides functions allowing to:
115 (+) Initializes the Flash interface the NVIC allocation and initial clock
116 configuration. It initializes the systick also when timeout is needed
117 and the backup domain when enabled.
118 (+) De-Initializes common part of the HAL.
119 (+) Configure the time base source to have 1ms time base with a dedicated
120 Tick interrupt priority.
121 (++) SysTick timer is used by default as source of time base, but user
122 can eventually implement his proper time base source (a general purpose
123 timer for example or other time source), keeping in mind that Time base
124 duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
125 handled in milliseconds basis.
126 (++) Time base configuration function (HAL_InitTick ()) is called automatically
127 at the beginning of the program after reset by HAL_Init() or at any time
128 when clock is configured, by HAL_RCC_ClockConfig().
129 (++) Source of time base is configured to generate interrupts at regular
130 time intervals. Care must be taken if HAL_Delay() is called from a
131 peripheral ISR process, the Tick interrupt line must have higher priority
132 (numerically lower) than the peripheral interrupt. Otherwise the caller
133 ISR process will be blocked.
134 (++) functions affecting time base configurations are declared as __weak
135 to make override possible in case of other implementations in user file.
136 @endverbatim
137 * @{
138 */
139
140 /**
141 * @brief This function is used to initialize the HAL Library; it must be the first
142 * instruction to be executed in the main program (before to call any other
143 * HAL function), it performs the following:
144 * Configure the Flash prefetch, instruction and Data caches.
145 * Configures the SysTick to generate an interrupt each 1 millisecond,
146 * which is clocked by the HSI (at this stage, the clock is not yet
147 * configured and thus the system is running from the internal HSI at 16 MHz).
148 * Set NVIC Group Priority to 4.
149 * Calls the HAL_MspInit() callback function defined in user file
150 * "stm32f4xx_hal_msp.c" to do the global low level hardware initialization
151 *
152 * @note SysTick is used as time base for the HAL_Delay() function, the application
153 * need to ensure that the SysTick time base is always set to 1 millisecond
154 * to have correct HAL operation.
155 * @retval HAL status
156 */
HAL_Init(void)157 HAL_StatusTypeDef HAL_Init(void)
158 {
159 /* Configure Flash prefetch, Instruction cache, Data cache */
160 #if (INSTRUCTION_CACHE_ENABLE != 0U)
161 __HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
162 #endif /* INSTRUCTION_CACHE_ENABLE */
163
164 #if (DATA_CACHE_ENABLE != 0U)
165 __HAL_FLASH_DATA_CACHE_ENABLE();
166 #endif /* DATA_CACHE_ENABLE */
167
168 #if (PREFETCH_ENABLE != 0U)
169 __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
170 #endif /* PREFETCH_ENABLE */
171
172 /* Set Interrupt Group Priority */
173 HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
174
175 /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
176 HAL_InitTick(TICK_INT_PRIORITY);
177
178 /* Init the low level hardware */
179 HAL_MspInit();
180
181 /* Return function status */
182 return HAL_OK;
183 }
184
185 /**
186 * @brief This function de-Initializes common part of the HAL and stops the systick.
187 * This function is optional.
188 * @retval HAL status
189 */
HAL_DeInit(void)190 HAL_StatusTypeDef HAL_DeInit(void)
191 {
192 /* Reset of all peripherals */
193 __HAL_RCC_APB1_FORCE_RESET();
194 __HAL_RCC_APB1_RELEASE_RESET();
195
196 __HAL_RCC_APB2_FORCE_RESET();
197 __HAL_RCC_APB2_RELEASE_RESET();
198
199 __HAL_RCC_AHB1_FORCE_RESET();
200 __HAL_RCC_AHB1_RELEASE_RESET();
201
202 __HAL_RCC_AHB2_FORCE_RESET();
203 __HAL_RCC_AHB2_RELEASE_RESET();
204
205 __HAL_RCC_AHB3_FORCE_RESET();
206 __HAL_RCC_AHB3_RELEASE_RESET();
207
208 /* De-Init the low level hardware */
209 HAL_MspDeInit();
210
211 /* Return function status */
212 return HAL_OK;
213 }
214
215 /**
216 * @brief Initialize the MSP.
217 * @retval None
218 */
HAL_MspInit(void)219 __weak void HAL_MspInit(void)
220 {
221 /* NOTE : This function should not be modified, when the callback is needed,
222 the HAL_MspInit could be implemented in the user file
223 */
224 }
225
226 /**
227 * @brief DeInitializes the MSP.
228 * @retval None
229 */
HAL_MspDeInit(void)230 __weak void HAL_MspDeInit(void)
231 {
232 /* NOTE : This function should not be modified, when the callback is needed,
233 the HAL_MspDeInit could be implemented in the user file
234 */
235 }
236
237 /**
238 * @brief This function configures the source of the time base.
239 * The time source is configured to have 1ms time base with a dedicated
240 * Tick interrupt priority.
241 * @note This function is called automatically at the beginning of program after
242 * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
243 * @note In the default implementation, SysTick timer is the source of time base.
244 * It is used to generate interrupts at regular time intervals.
245 * Care must be taken if HAL_Delay() is called from a peripheral ISR process,
246 * The SysTick interrupt must have higher priority (numerically lower)
247 * than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
248 * The function is declared as __weak to be overwritten in case of other
249 * implementation in user file.
250 * @param TickPriority Tick interrupt priority.
251 * @retval HAL status
252 */
HAL_InitTick(uint32_t TickPriority)253 __weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
254 {
255 /* Configure the SysTick to have interrupt in 1ms time basis*/
256 if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)
257 {
258 return HAL_ERROR;
259 }
260
261 /* Configure the SysTick IRQ priority */
262 if (TickPriority < (1UL << __NVIC_PRIO_BITS))
263 {
264 HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
265 uwTickPrio = TickPriority;
266 }
267 else
268 {
269 return HAL_ERROR;
270 }
271
272 /* Return function status */
273 return HAL_OK;
274 }
275
276 /**
277 * @}
278 */
279
280 /** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
281 * @brief HAL Control functions
282 *
283 @verbatim
284 ===============================================================================
285 ##### HAL Control functions #####
286 ===============================================================================
287 [..] This section provides functions allowing to:
288 (+) Provide a tick value in millisecond
289 (+) Provide a blocking delay in millisecond
290 (+) Suspend the time base source interrupt
291 (+) Resume the time base source interrupt
292 (+) Get the HAL API driver version
293 (+) Get the device identifier
294 (+) Get the device revision identifier
295 (+) Enable/Disable Debug module during SLEEP mode
296 (+) Enable/Disable Debug module during STOP mode
297 (+) Enable/Disable Debug module during STANDBY mode
298
299 @endverbatim
300 * @{
301 */
302
303 /**
304 * @brief This function is called to increment a global variable "uwTick"
305 * used as application time base.
306 * @note In the default implementation, this variable is incremented each 1ms
307 * in SysTick ISR.
308 * @note This function is declared as __weak to be overwritten in case of other
309 * implementations in user file.
310 * @retval None
311 */
HAL_IncTick(void)312 __weak void HAL_IncTick(void)
313 {
314 uwTick += uwTickFreq;
315 }
316
317 /**
318 * @brief Provides a tick value in millisecond.
319 * @note This function is declared as __weak to be overwritten in case of other
320 * implementations in user file.
321 * @retval tick value
322 */
HAL_GetTick(void)323 __weak uint32_t HAL_GetTick(void)
324 {
325 return uwTick;
326 }
327
328 /**
329 * @brief This function returns a tick priority.
330 * @retval tick priority
331 */
HAL_GetTickPrio(void)332 uint32_t HAL_GetTickPrio(void)
333 {
334 return uwTickPrio;
335 }
336
337 /**
338 * @brief Set new tick Freq.
339 * @retval Status
340 */
HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)341 HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
342 {
343 HAL_StatusTypeDef status = HAL_OK;
344 HAL_TickFreqTypeDef prevTickFreq;
345
346 assert_param(IS_TICKFREQ(Freq));
347
348 if (uwTickFreq != Freq)
349 {
350 /* Back up uwTickFreq frequency */
351 prevTickFreq = uwTickFreq;
352
353 /* Update uwTickFreq global variable used by HAL_InitTick() */
354 uwTickFreq = Freq;
355
356 /* Apply the new tick Freq */
357 status = HAL_InitTick(uwTickPrio);
358
359 if (status != HAL_OK)
360 {
361 /* Restore previous tick frequency */
362 uwTickFreq = prevTickFreq;
363 }
364 }
365
366 return status;
367 }
368
369 /**
370 * @brief Return tick frequency.
371 * @retval Tick frequency.
372 * Value of @ref HAL_TickFreqTypeDef.
373 */
HAL_GetTickFreq(void)374 HAL_TickFreqTypeDef HAL_GetTickFreq(void)
375 {
376 return uwTickFreq;
377 }
378
379 /**
380 * @brief This function provides minimum delay (in milliseconds) based
381 * on variable incremented.
382 * @note In the default implementation , SysTick timer is the source of time base.
383 * It is used to generate interrupts at regular time intervals where uwTick
384 * is incremented.
385 * @note This function is declared as __weak to be overwritten in case of other
386 * implementations in user file.
387 * @param Delay specifies the delay time length, in milliseconds.
388 * @retval None
389 */
HAL_Delay(uint32_t Delay)390 __weak void HAL_Delay(uint32_t Delay)
391 {
392 uint32_t tickstart = HAL_GetTick();
393 uint32_t wait = Delay;
394
395 /* Add a freq to guarantee minimum wait */
396 if (wait < HAL_MAX_DELAY)
397 {
398 wait += (uint32_t)(uwTickFreq);
399 }
400
401 while((HAL_GetTick() - tickstart) < wait)
402 {
403 }
404 }
405
406 /**
407 * @brief Suspend Tick increment.
408 * @note In the default implementation , SysTick timer is the source of time base. It is
409 * used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
410 * is called, the SysTick interrupt will be disabled and so Tick increment
411 * is suspended.
412 * @note This function is declared as __weak to be overwritten in case of other
413 * implementations in user file.
414 * @retval None
415 */
HAL_SuspendTick(void)416 __weak void HAL_SuspendTick(void)
417 {
418 /* Disable SysTick Interrupt */
419 SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
420 }
421
422 /**
423 * @brief Resume Tick increment.
424 * @note In the default implementation , SysTick timer is the source of time base. It is
425 * used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
426 * is called, the SysTick interrupt will be enabled and so Tick increment
427 * is resumed.
428 * @note This function is declared as __weak to be overwritten in case of other
429 * implementations in user file.
430 * @retval None
431 */
HAL_ResumeTick(void)432 __weak void HAL_ResumeTick(void)
433 {
434 /* Enable SysTick Interrupt */
435 SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
436 }
437
438 /**
439 * @brief Returns the HAL revision
440 * @retval version : 0xXYZR (8bits for each decimal, R for RC)
441 */
HAL_GetHalVersion(void)442 uint32_t HAL_GetHalVersion(void)
443 {
444 return __STM32F4xx_HAL_VERSION;
445 }
446
447 /**
448 * @brief Returns the device revision identifier.
449 * @retval Device revision identifier
450 */
HAL_GetREVID(void)451 uint32_t HAL_GetREVID(void)
452 {
453 return((DBGMCU->IDCODE) >> 16U);
454 }
455
456 /**
457 * @brief Returns the device identifier.
458 * @retval Device identifier
459 */
HAL_GetDEVID(void)460 uint32_t HAL_GetDEVID(void)
461 {
462 return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
463 }
464
465 /**
466 * @brief Enable the Debug Module during SLEEP mode
467 * @retval None
468 */
HAL_DBGMCU_EnableDBGSleepMode(void)469 void HAL_DBGMCU_EnableDBGSleepMode(void)
470 {
471 SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
472 }
473
474 /**
475 * @brief Disable the Debug Module during SLEEP mode
476 * @retval None
477 */
HAL_DBGMCU_DisableDBGSleepMode(void)478 void HAL_DBGMCU_DisableDBGSleepMode(void)
479 {
480 CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
481 }
482
483 /**
484 * @brief Enable the Debug Module during STOP mode
485 * @retval None
486 */
HAL_DBGMCU_EnableDBGStopMode(void)487 void HAL_DBGMCU_EnableDBGStopMode(void)
488 {
489 SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
490 }
491
492 /**
493 * @brief Disable the Debug Module during STOP mode
494 * @retval None
495 */
HAL_DBGMCU_DisableDBGStopMode(void)496 void HAL_DBGMCU_DisableDBGStopMode(void)
497 {
498 CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
499 }
500
501 /**
502 * @brief Enable the Debug Module during STANDBY mode
503 * @retval None
504 */
HAL_DBGMCU_EnableDBGStandbyMode(void)505 void HAL_DBGMCU_EnableDBGStandbyMode(void)
506 {
507 SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
508 }
509
510 /**
511 * @brief Disable the Debug Module during STANDBY mode
512 * @retval None
513 */
HAL_DBGMCU_DisableDBGStandbyMode(void)514 void HAL_DBGMCU_DisableDBGStandbyMode(void)
515 {
516 CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
517 }
518
519 /**
520 * @brief Enables the I/O Compensation Cell.
521 * @note The I/O compensation cell can be used only when the device supply
522 * voltage ranges from 2.4 to 3.6 V.
523 * @retval None
524 */
HAL_EnableCompensationCell(void)525 void HAL_EnableCompensationCell(void)
526 {
527 *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE;
528 }
529
530 /**
531 * @brief Power-down the I/O Compensation Cell.
532 * @note The I/O compensation cell can be used only when the device supply
533 * voltage ranges from 2.4 to 3.6 V.
534 * @retval None
535 */
HAL_DisableCompensationCell(void)536 void HAL_DisableCompensationCell(void)
537 {
538 *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE;
539 }
540
541 /**
542 * @brief Returns first word of the unique device identifier (UID based on 96 bits)
543 * @retval Device identifier
544 */
HAL_GetUIDw0(void)545 uint32_t HAL_GetUIDw0(void)
546 {
547 return (READ_REG(*((uint32_t *)UID_BASE)));
548 }
549
550 /**
551 * @brief Returns second word of the unique device identifier (UID based on 96 bits)
552 * @retval Device identifier
553 */
HAL_GetUIDw1(void)554 uint32_t HAL_GetUIDw1(void)
555 {
556 return (READ_REG(*((uint32_t *)(UID_BASE + 4U))));
557 }
558
559 /**
560 * @brief Returns third word of the unique device identifier (UID based on 96 bits)
561 * @retval Device identifier
562 */
HAL_GetUIDw2(void)563 uint32_t HAL_GetUIDw2(void)
564 {
565 return (READ_REG(*((uint32_t *)(UID_BASE + 8U))));
566 }
567
568 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
569 defined(STM32F469xx) || defined(STM32F479xx)
570 /**
571 * @brief Enables the Internal FLASH Bank Swapping.
572 *
573 * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices.
574 *
575 * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
576 * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)
577 *
578 * @retval None
579 */
HAL_EnableMemorySwappingBank(void)580 void HAL_EnableMemorySwappingBank(void)
581 {
582 *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE;
583 }
584
585 /**
586 * @brief Disables the Internal FLASH Bank Swapping.
587 *
588 * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices.
589 *
590 * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000)
591 * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000)
592 *
593 * @retval None
594 */
HAL_DisableMemorySwappingBank(void)595 void HAL_DisableMemorySwappingBank(void)
596 {
597 *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE;
598 }
599 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
600 /**
601 * @}
602 */
603
604 /**
605 * @}
606 */
607
608 /**
609 * @}
610 */
611
612 /**
613 * @}
614 */
615
616
