1 /* 2 * Copyright (c) 2020, The OpenThread Authors. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. Neither the name of the copyright holder nor the 13 * names of its contributors may be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 17 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 20 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26 * POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 /** 30 * @file 31 * This file includes compile-time configurations for the SRP (Service Registration Protocol) Client. 32 * 33 */ 34 35 #ifndef CONFIG_SRP_CLIENT_H_ 36 #define CONFIG_SRP_CLIENT_H_ 37 38 /** 39 * @addtogroup config-srp-client 40 * 41 * @brief 42 * This module includes configuration variables for the SRP Client. 43 * 44 * @{ 45 * 46 */ 47 48 #include "config/misc.h" 49 50 /** 51 * @def OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 52 * 53 * Define to 1 to enable SRP Client support. 54 * 55 */ 56 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 57 #define OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 0 58 #endif 59 60 /** 61 * @def OPENTHREAD_CONFIG_SRP_CLIENT_AUTO_START_API_ENABLE 62 * 63 * Define to 1 to enable SRP Client auto-start feature and its APIs. 64 * 65 * When enabled, the SRP client can be configured to automatically start when it detects the presence of an SRP server 66 * (by monitoring the Thread Network Data for SRP Server Service entries). 67 * 68 */ 69 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_AUTO_START_API_ENABLE 70 #define OPENTHREAD_CONFIG_SRP_CLIENT_AUTO_START_API_ENABLE 1 71 #endif 72 73 /** 74 * @def OPENTHREAD_CONFIG_SRP_CLIENT_AUTO_START_DEFAULT_MODE 75 * 76 * Define the default mode (enabled or disabled) of auto-start mode. 77 * 78 * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_AUTO_START_API_ENABLE` is enabled. 79 * 80 */ 81 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_AUTO_START_DEFAULT_MODE 82 #define OPENTHREAD_CONFIG_SRP_CLIENT_AUTO_START_DEFAULT_MODE 1 83 #endif 84 85 /** 86 * @def OPENTHREAD_CONFIG_SRP_CLIENT_SWITCH_SERVER_ON_FAILURE 87 * 88 * Define to 1 to enable SRP client to switch server on failure (when auto-start feature is used). 89 * 90 * This config is only used when `OPENTHREAD_CONFIG_SRP_CLIENT_AUTO_START_API_ENABLE` is enabled. 91 * 92 * When enabled, the client will try to select the next server from entries in Thread Network Data when the current 93 * server rejects an SRP update or there is no response (timeout waiting for response from server). 94 * 95 */ 96 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_SWITCH_SERVER_ON_FAILURE 97 #define OPENTHREAD_CONFIG_SRP_CLIENT_SWITCH_SERVER_ON_FAILURE 1 98 #endif 99 100 /** 101 * @def OPENTHREAD_CONFIG_SRP_CLIENT_DISALLOW_SERVER_SWITCH_WITH_REGISTERED_HOST 102 * 103 * Define to 1 to disallow SRP client to switch server (when auto-start is used) on failure if host (or any services) 104 * were previously successfully registered with the currently selected server. 105 * 106 * This config is only applicable when `OPENTHREAD_CONFIG_SRP_CLIENT_SWITCH_SERVER_ON_FAILURE` is enabled. 107 * 108 * If this is enabled, once SRP client successfully registers with an auto-start selected SRP server, it stays with 109 * the selected SRP server (even if future SRP updates fail or timeout) while the related server entry remains present 110 * in the Thread Network Data. If the entry is removed from Network Data, then SRP client will try to select a new 111 * server. 112 * 113 * Enabling this behavior would be useful allowing more aggressive switch logic (e.g., switch after fewer timeouts 114 * `OPENTHREAD_CONFIG_SRP_CLIENT_MAX_TIMEOUT_FAILURES_TO_SWITCH_SERVER`) while not allowing switch due to temporary 115 * failures on the currently selected server. This can help avoid situation where the old server may still remember the 116 * registered host/service info and client switching to a new server then failing due to name conflict (when new server 117 * probes for the host/service name original server would not allow new registration). 118 * 119 */ 120 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_DISALLOW_SERVER_SWITCH_WITH_REGISTERED_HOST 121 #define OPENTHREAD_CONFIG_SRP_CLIENT_DISALLOW_SERVER_SWITCH_WITH_REGISTERED_HOST 1 122 #endif 123 124 /** 125 * @def OPENTHREAD_CONFIG_SRP_CLIENT_MAX_TIMEOUT_FAILURES_TO_SWITCH_SERVER 126 * 127 * Specifies number of timeout failures to trigger a switch of server. 128 * 129 * This is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_SWITCH_SERVER_ON_FAILURE` is used. 130 * 131 */ 132 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_MAX_TIMEOUT_FAILURES_TO_SWITCH_SERVER 133 #define OPENTHREAD_CONFIG_SRP_CLIENT_MAX_TIMEOUT_FAILURES_TO_SWITCH_SERVER 3 134 #endif 135 136 /** 137 * @def OPENTHREAD_CONFIG_SRP_CLIENT_DOMAIN_NAME_API_ENABLE 138 * 139 * Define to 1 for the SRP client implementation to provide APIs that get/set the domain name. 140 * 141 */ 142 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_DOMAIN_NAME_API_ENABLE 143 #define OPENTHREAD_CONFIG_SRP_CLIENT_DOMAIN_NAME_API_ENABLE 0 144 #endif 145 146 /** 147 * @def OPENTHREAD_CONFIG_SRP_CLIENT_SAVE_SELECTED_SERVER_ENABLE 148 * 149 * Define to 1 to enable SRP client feature to save the selected server in non-volatile settings. 150 * 151 * When enabled, the SRP client will save the selected server info by auto-start feature in the non-volatile settings 152 * and on a client restart (e.g., due to a device reset) it will select the same server when searching to discover and 153 * pick one from the Thread Network Data service entries. The server info is saved only after the host info is 154 * successfully registered with the server and if it is selected by auto-start from a network data SRP *unicast* 155 * service entry. 156 * 157 */ 158 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_SAVE_SELECTED_SERVER_ENABLE 159 #define OPENTHREAD_CONFIG_SRP_CLIENT_SAVE_SELECTED_SERVER_ENABLE 1 160 #endif 161 162 /** 163 * @def OPENTHREAD_CONFIG_SRP_CLIENT_DEFAULT_LEASE 164 * 165 * Specifies the default requested lease interval (in seconds). Set to two hours. 166 * 167 */ 168 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_DEFAULT_LEASE 169 #define OPENTHREAD_CONFIG_SRP_CLIENT_DEFAULT_LEASE (2 * 60 * 60) 170 #endif 171 172 /** 173 * @def OPENTHREAD_CONFIG_SRP_CLIENT_DEFAULT_KEY_LEASE 174 * 175 * Specifies the default requested key lease interval (in seconds). Set to 14 days. 176 * 177 */ 178 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_DEFAULT_KEY_LEASE 179 #define OPENTHREAD_CONFIG_SRP_CLIENT_DEFAULT_KEY_LEASE (14 * 24 * 60 * 60) 180 #endif 181 182 /** 183 * @def OPENTHREAD_CONFIG_SRP_CLIENT_LEASE_RENEW_GUARD_INTERVAL 184 * 185 * Specifies the guard interval (in seconds) for lease renew time. The guard interval determines how much earlier 186 * (relative to the lease expiration time) the SRP client will send an SRP update for lease renewal. 187 * 188 */ 189 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_LEASE_RENEW_GUARD_INTERVAL 190 #define OPENTHREAD_CONFIG_SRP_CLIENT_LEASE_RENEW_GUARD_INTERVAL 120 // two minutes in seconds 191 #endif 192 193 /** 194 * @def OPENTHREAD_CONFIG_SRP_CLIENT_EARLY_LEASE_RENEW_FACTOR_NUMERATOR 195 * 196 * Specifies the numerator of early lease renewal factor. 197 * 198 * This value is used for opportunistic early refresh behave. When sending an SRP update, the services that are not yet 199 * expired but are close, are allowed to refresh early and are included in the SRP update. 200 * 201 * The "early lease renewal interval" is used to determine if a service can renew early. The interval is calculated by 202 * multiplying the accepted lease interval by the "early lease renewal factor" which is given as a fraction (numerator 203 * and denominator). 204 * 205 * If the factor is set to zero (numerator=0, denominator=1), the opportunistic early refresh behavior is disabled. 206 * If denominator is set to zero (the factor is set to infinity), then all services (including previously registered 207 * ones) are always included in SRP update message. 208 * 209 * Default value is 1/2 (i.e., services that are within half of the lease interval are allowed to refresh early). 210 * 211 */ 212 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_EARLY_LEASE_RENEW_FACTOR_NUMERATOR 213 #define OPENTHREAD_CONFIG_SRP_CLIENT_EARLY_LEASE_RENEW_FACTOR_NUMERATOR 1 214 #endif 215 216 /** 217 * @def OPENTHREAD_CONFIG_SRP_CLIENT_EARLY_LEASE_RENEW_FACTOR_DENOMINATOR 218 * 219 * Specifies the denominator of early lease renewal factor. 220 * 221 * Please see OPENTHREAD_CONFIG_SRP_CLIENT_EARLY_LEASE_RENEW_FACTOR_NUMERATOR for more details. 222 * 223 */ 224 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_EARLY_LEASE_RENEW_FACTOR_DENOMINATOR 225 #define OPENTHREAD_CONFIG_SRP_CLIENT_EARLY_LEASE_RENEW_FACTOR_DENOMINATOR 2 226 #endif 227 228 /** 229 * @def OPENTHREAD_CONFIG_SRP_CLIENT_MIN_RETRY_WAIT_INTERVAL 230 * 231 * Specifies the minimum wait interval (in msec) between SRP update message retries. 232 * 233 * The update message is retransmitted if there is no response from server or if server rejects the update. The wait 234 * interval starts from the minimum value and is increased by the growth factor every failure up to the max value. 235 * 236 */ 237 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_MIN_RETRY_WAIT_INTERVAL 238 #define OPENTHREAD_CONFIG_SRP_CLIENT_MIN_RETRY_WAIT_INTERVAL 1800 239 #endif 240 241 /** 242 * @def OPENTHREAD_CONFIG_SRP_CLIENT_MAX_RETRY_WAIT_INTERVAL 243 * 244 * Specifies the maximum wait interval (in msec) between SRP update message retries. 245 * 246 */ 247 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_MAX_RETRY_WAIT_INTERVAL 248 #define OPENTHREAD_CONFIG_SRP_CLIENT_MAX_RETRY_WAIT_INTERVAL (1 * 60 * 60 * 1000) // 1 hour in ms. 249 #endif 250 251 /** 252 * @def OPENTHREAD_CONFIG_SRP_CLIENT_RETRY_WAIT_INTERVAL_JITTER 253 * 254 * Specifies jitter (in msec) for retry wait interval. If the current retry wait interval is smaller than the jitter 255 * then the wait interval itself is used as jitter (e.g., with jitter 500 msec and if retry interval is 300ms 256 * the retry interval is then randomly selected from [0, 2*300] ms). 257 * 258 */ 259 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_RETRY_WAIT_INTERVAL_JITTER 260 #define OPENTHREAD_CONFIG_SRP_CLIENT_RETRY_WAIT_INTERVAL_JITTER 500 261 #endif 262 263 /** 264 * @def OPENTHREAD_CONFIG_SRP_CLIENT_RETRY_INTERVAL_GROWTH_FACTOR_NUMERATOR 265 * 266 * Specifies the numerator of the retry wait interval growth factor fraction. The growth factor is represented as 267 * a fraction (e.g., for 1.5, we can use 15 as the numerator and 10 as the denominator). 268 * 269 */ 270 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_RETRY_INTERVAL_GROWTH_FACTOR_NUMERATOR 271 #define OPENTHREAD_CONFIG_SRP_CLIENT_RETRY_INTERVAL_GROWTH_FACTOR_NUMERATOR 17 272 #endif 273 274 /** 275 * @def OPENTHREAD_CONFIG_SRP_CLIENT_RETRY_INTERVAL_GROWTH_FACTOR_DENOMINATOR 276 * 277 * Specifies the denominator of the retry wait interval growth factor fraction. 278 * 279 */ 280 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_RETRY_INTERVAL_GROWTH_FACTOR_DENOMINATOR 281 #define OPENTHREAD_CONFIG_SRP_CLIENT_RETRY_INTERVAL_GROWTH_FACTOR_DENOMINATOR 10 282 #endif 283 284 /** 285 * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE 286 * 287 * Define to 1 to enable SRP Client buffers and service pool feature. 288 * 289 */ 290 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE 291 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 292 #endif 293 294 /** 295 * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES 296 * 297 * Specifies number of service entries in the SRP client service pool. 298 * 299 * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled. 300 * 301 */ 302 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES 303 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES 2 304 #endif 305 306 /** 307 * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_HOST_ADDRESSES 308 * 309 * Specifies number of host IPv6 address entries in the SRP client buffers and service pool. 310 * 311 * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled. 312 * 313 */ 314 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_HOST_ADDRESSES 315 #if OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE 316 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_HOST_ADDRESSES 10 317 #else 318 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_HOST_ADDRESSES 2 319 #endif 320 #endif 321 322 /** 323 * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_HOST_NAME_SIZE 324 * 325 * Specifies the size (number of chars) of host name string buffer in the SRP client buffers and service pool. 326 * 327 * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled. 328 * 329 */ 330 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_HOST_NAME_SIZE 331 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_HOST_NAME_SIZE 64 332 #endif 333 334 /** 335 * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_SERVICE_NAME_SIZE 336 * 337 * Specifies the size (number of chars) of service name string buffer in the SRP client buffers and service pool. 338 * 339 * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled. 340 * 341 */ 342 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_SERVICE_NAME_SIZE 343 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_SERVICE_NAME_SIZE 96 344 #endif 345 346 /** 347 * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_SERVICE_MAX_SUB_TYPES 348 * 349 * Specifies the maximum number of service subtype labels (array length) in the SRP client buffers and service pool. 350 * 351 * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled. 352 * 353 */ 354 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_SERVICE_MAX_SUB_TYPES 355 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_SERVICE_MAX_SUB_TYPES 6 356 #endif 357 358 /** 359 * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_SERVICE_INSTANCE_NAME_SIZE 360 * 361 * Specifies the size (number of chars) of service instance name string buffer in the SRP client buffers and service 362 * pool. 363 * 364 * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled. 365 * 366 */ 367 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_SERVICE_INSTANCE_NAME_SIZE 368 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_SERVICE_INSTANCE_NAME_SIZE 64 369 #endif 370 371 /** 372 * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_TXT_BUFFER_SIZE 373 * 374 * Specifies the size (number of bytes) of TXT record value buffer in the SRP client buffers and service pool. 375 * 376 * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled. 377 * 378 */ 379 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_TXT_BUFFER_SIZE 380 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_TXT_BUFFER_SIZE 64 381 #endif 382 383 /** 384 * @} 385 * 386 */ 387 388 #endif // CONFIG_SRP_CLIENT_H_ 389
