Searched full:voltages (Results 1 – 25 of 43) sorted by relevance
12
19 * J33.1 (ADC1 CH3) and J33.2 (ADC1 CH4) to voltages between 0 and 3.3V
21 to ADC channel 8, when voltages cross upper/lower limits, detection messages
22 * be connected to various voltages to observe the change in reading.
20 * J33.1 (ADC1 CH3) and J33.2 (ADC1 CH4) to voltages between 0 and 3.3V
29 Tolerance (+/-) when reading configured voltages using ADC. This should
65 # list all the supported voltages by BUCK266 npm6001 regulator voltages BUCK2
33 long, representing the voltages for 0-100% charge in 10% steps.
45 specifies a set of voltages used to drive the refresh
27 specifies a set of voltages used to drive the refresh
47 # list all the supported voltages by BUCK1
9 An analog comparator compares the voltages of two analog signals connected to its negative and
54 Selection of available voltages provided by this regulator and matching
32 description: Offset applied to voltages to compensate for voltage drops266 Maximum difference between current and target voltages that can be changed
109 "Regulator requires fixed voltages"); \
385 /* configure mode voltages */ in regulator_pca9420_init()438 * but they may want to query/set voltages for another mode. in regulator_pca9420_dvs_state_set()
171 /* do not print repeated voltages */ in cmd_vlist()552 "List all supported voltages\n"
33 * - set default reference voltages in Device Tree or using
108 * representing voltages state and partner detection status.
460 SHELL_CMD_ARG(voltages, NULL, "List voltages",
90 * @brief Verify bus voltages for all ina230 nodes in DT
16 amplification factor and operating voltages. For example AMG8833 features a 60
44 * @brief Verify bus voltages for all ina237 nodes in DT
13 user LEDs, and a push button. The board supports operating voltages from 1.8 V to 3.3 V for PSoC™ 6…
202 /* Get current and future PMIC voltages to determine DVFS sequence */ in power_manager_set_profile()
