Searched full:ttyusb0 (Results 1 – 25 of 70) sorted by relevance
123
| /Zephyr-Core-3.5.0/samples/boards/96b_argonkey/microphone/ |
| D | README.rst | 80 The ttyUSB0 port must be configured in raw mode to avoid having
85 stty -F /dev/ttyUSB0 115200 raw
86 cat /dev/ttyUSB0 > /tmp/sound.raw
88 .. note:: The "cat /dev/ttyUSB0 > /tmp/sound.raw" command should be launched after the audio
|
| /Zephyr-Core-3.5.0/samples/sensor/dps310/ |
| D | README.rst | 33 This example uses ``picocom`` on the serial port ``/dev/ttyUSB0``:
37 $ sudo picocom -D /dev/ttyUSB0
|
| /Zephyr-Core-3.5.0/boards/arm/gd32a503v_eval/doc/ |
| D | index.rst | 131 terminal should be :code:`/dev/ttyUSB0`. For example:
135 $ minicom -D /dev/ttyUSB0 -o
188 west flash -r gd32isp [--port=/dev/ttyUSB0]
191 terminal should be :code:`/dev/ttyUSB0`. For example:
195 $ minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/arm/gd32e103v_eval/doc/ |
| D | index.rst | 123 terminal should be :code:`/dev/ttyUSB0`. For example:
127 $ minicom -D /dev/ttyUSB0 -o
181 west flash -r gd32isp [--port=/dev/ttyUSB0]
184 terminal should be :code:`/dev/ttyUSB0`. For example:
188 $ minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/samples/sensor/max17262/ |
| D | README.rst | 42 This example uses ``picocom`` on the serial port ``/dev/ttyUSB0``:
46 $ sudo picocom -D /dev/ttyUSB0
|
| /Zephyr-Core-3.5.0/samples/drivers/uart/native_tty/boards/ |
| D | native_posix.overlay | 6 serial-port = "/dev/ttyUSB0";
|
| /Zephyr-Core-3.5.0/dts/bindings/serial/ |
| D | zephyr,native-tty-uart.yaml | 12 Full path to the serial port device, such as "/dev/ttyUSB0" or
|
| /Zephyr-Core-3.5.0/boards/arm/gd32f403z_eval/doc/ |
| D | index.rst | 126 terminal should be :code:`/dev/ttyUSB0`. For example:
130 $ minicom -D /dev/ttyUSB0 -o
184 west flash -r gd32isp [--port=/dev/ttyUSB0]
187 terminal should be :code:`/dev/ttyUSB0`. For example:
191 $ minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/riscv/gd32vf103c_starter/doc/ |
| D | index.rst | 95 terminal should be something like ``/dev/ttyUSB0``. For example:
99 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/samples/drivers/uart/native_tty/ |
| D | README.rst | 28 ``/dev/ttyUSB0`` and ``/dev/ttyUSB1`` in the system. You can check what they
53 uart connected to the serial port: /dev/ttyUSB0
|
| /Zephyr-Core-3.5.0/boards/arm/gd32f350r_eval/doc/ |
| D | index.rst | 99 terminal should be something like ``/dev/ttyUSB0``. For example:
103 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/arm/gd32f450v_start/doc/ |
| D | index.rst | 101 terminal should be something like ``/dev/ttyUSB0``. For example:
105 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/arm/gd32l233r_eval/doc/ |
| D | index.rst | 100 terminal should be something like ``/dev/ttyUSB0``. For example:
104 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/arm/gd32e507v_start/doc/ |
| D | index.rst | 106 terminal should be something like ``/dev/ttyUSB0``. For example:
110 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/arm/gd32f407v_start/doc/ |
| D | index.rst | 110 terminal should be something like ``/dev/ttyUSB0``. For example:
114 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/arm/gd32e507z_eval/doc/ |
| D | index.rst | 114 terminal should be something like ``/dev/ttyUSB0``. For example:
118 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/arm/gd32f450z_eval/doc/ |
| D | index.rst | 119 terminal should be something like ``/dev/ttyUSB0``. For example:
123 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/riscv/gd32vf103v_eval/doc/ |
| D | index.rst | 105 terminal should be something like ``/dev/ttyUSB0``. For example:
109 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/samples/boards/esp32/spiram_test/ |
| D | README.rst | 44 port at ``/dev/ttyUSB0``:
|
| /Zephyr-Core-3.5.0/boards/arm/gd32f450i_eval/doc/ |
| D | index.rst | 124 terminal should be something like ``/dev/ttyUSB0``. For example:
128 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/boards/arm/gd32f470i_eval/doc/ |
| D | index.rst | 123 terminal should be something like ``/dev/ttyUSB0``. For example:
127 minicom -D /dev/ttyUSB0 -o
|
| /Zephyr-Core-3.5.0/scripts/west_commands/runners/ |
| D | gd32isp.py | 9 DEFAULT_GD32ISP_PORT = '/dev/ttyUSB0'
|
| /Zephyr-Core-3.5.0/scripts/west_commands/tests/ |
| D | test_gd32isp.py | 25 [TEST_GD32ISP_CLI, '-c', '--pn', '/dev/ttyUSB0', '--br', '57600',
|
| /Zephyr-Core-3.5.0/samples/boards/sensortile_box/ |
| D | README.rst | 53 can be found. For example, under Linux, :code:`/dev/ttyUSB0`.
|
| /Zephyr-Core-3.5.0/boards/riscv/it8xxx2_evb/doc/ |
| D | index.rst | 190 Under Linux the terminal should be :code:`/dev/ttyUSB0`. Do not close it.
196 $ minicom -D /dev/ttyUSB0 -b 115200
|
123
