| /Zephyr-Core-3.6.0/samples/basic/fade_led/src/ |
| D | main.c | 25 uint32_t step = pwm_led0.period / NUM_STEPS; in main() local
45 pulse_width += step; in main()
47 pulse_width = pwm_led0.period - step; in main()
51 if (pulse_width >= step) { in main()
52 pulse_width -= step; in main()
54 pulse_width = step; in main()
|
| /Zephyr-Core-3.6.0/samples/modules/tflite-micro/hello_world/train/ |
| D | train_hello_world_model.ipynb | 446 …"10/10 [==============================] - 1s 47ms/step - loss: 0.7289 - mae: 0.7120 - val_loss: 0.…
448 …"10/10 [==============================] - 0s 6ms/step - loss: 0.6329 - mae: 0.6488 - val_loss: 0.5…
450 …"10/10 [==============================] - 0s 6ms/step - loss: 0.5201 - mae: 0.5735 - val_loss: 0.5…
452 …"10/10 [==============================] - 0s 6ms/step - loss: 0.5057 - mae: 0.5760 - val_loss: 0.4…
454 …"10/10 [==============================] - 0s 5ms/step - loss: 0.4502 - mae: 0.5459 - val_loss: 0.4…
456 …"10/10 [==============================] - 0s 6ms/step - loss: 0.4168 - mae: 0.5332 - val_loss: 0.4…
458 …"10/10 [==============================] - 0s 6ms/step - loss: 0.4211 - mae: 0.5341 - val_loss: 0.4…
460 …"10/10 [==============================] - 0s 6ms/step - loss: 0.3988 - mae: 0.5287 - val_loss: 0.4…
462 …"10/10 [==============================] - 0s 5ms/step - loss: 0.3901 - mae: 0.5230 - val_loss: 0.4…
464 …"10/10 [==============================] - 0s 5ms/step - loss: 0.3804 - mae: 0.5179 - val_loss: 0.3…
[all …]
|
| /Zephyr-Core-3.6.0/include/zephyr/arch/xtensa/ |
| D | cache.h | 31 size_t step = XCHAL_DCACHE_LINESIZE; in arch_dcache_flush_range() local
32 size_t first = ROUND_DOWN(addr, step); in arch_dcache_flush_range()
33 size_t last = ROUND_UP(((long)addr) + bytes, step); in arch_dcache_flush_range()
36 for (line = first; bytes && line < last; line += step) { in arch_dcache_flush_range()
47 size_t step = XCHAL_DCACHE_LINESIZE; in arch_dcache_flush_and_invd_range() local
48 size_t first = ROUND_DOWN(addr, step); in arch_dcache_flush_and_invd_range()
49 size_t last = ROUND_UP(((long)addr) + bytes, step); in arch_dcache_flush_and_invd_range()
52 for (line = first; bytes && line < last; line += step) { in arch_dcache_flush_and_invd_range()
63 size_t step = XCHAL_DCACHE_LINESIZE; in arch_dcache_invd_range() local
64 size_t first = ROUND_DOWN(addr, step); in arch_dcache_invd_range()
[all …]
|
| /Zephyr-Core-3.6.0/tests/bsim/bluetooth/mesh/tests_scripts/provision/ |
| D | pb_remote_pst_ncrp.sh | 33 # Step 1
40 # Step 2
47 # Step 3
55 # Step 1
62 # Step 2
69 # Step 3
|
| /Zephyr-Core-3.6.0/tests/bsim/bluetooth/mesh/tests_scripts/friendship/ |
| D | msg_va_collision.sh | 12 # 2. Step 1:
14 # 3. Step 2:
15 # 3.1. LPN unsubscribes from one of the virtual addresses. At this step no Friend Subscription
19 # 4. Step 3:
|
| /Zephyr-Core-3.6.0/doc/connectivity/bluetooth/api/mesh/ |
| D | sar_cfg.rst | 60 `SAR Segment Interval Step`_ state). Other configurable time intervals and delays available for the
63 …ast retransmissions (see the states `SAR Unicast Retransmissions Interval Step`_ and `SAR Unicast …
64 * Interval between multicast retransmissions (see the `SAR Multicast Retransmissions Interval Step`…
65 * Segment reception interval (see the `SAR Receiver Segment Interval Step`_ state).
75 …unicast~retransmissions~interval~step + unicast~retransmissions~interval~increment \times (TTL - 1)
79 retransmissions interval step.
124 * SAR Segment Interval Step
127 * SAR Unicast Retransmissions Interval Step
130 * SAR Multicast Retransmissions Interval Step
140 * SAR Receiver Segment Interval Step
[all …]
|
| /Zephyr-Core-3.6.0/include/zephyr/sys/ |
| D | linear_range.h | 27 * - Step value
43 * - Step value: 250uV
47 * A linear range may also be constant, that is, step set to zero.
64 /** Step value. */
65 uint32_t step; member
76 * @param _step Step value.
83 .step = (_step), \
129 return r->min + (int32_t)(r->step * (r->max_idx - r->min_idx)); in linear_range_get_max_value()
149 *val = r->min + (int32_t)(r->step * (idx - r->min_idx)); in linear_range_get_value()
206 if (r->step == 0U) { in linear_range_get_index()
[all …]
|
| /Zephyr-Core-3.6.0/samples/subsys/mgmt/hawkbit/ |
| D | README.rst | 47 Step 1: Build MCUboot
53 Step 2: Flash MCUboot
63 Step 3: Start the Hawkbit Docker
78 Step 4: Build Hawkbit
91 Step 5: Sign and confirm the first image
108 Step 6: Flash the first image
111 Upload the :file:`zephyr.signed.confirmed.bin` file from Step 5 to image slot-0
123 Step 7: Building and signing the test image
126 The easiest way to test the functionality of Hawkbit is to repeat step 4 to
128 to step 5, sign the image and assign it a different version number but without
[all …]
|
| /Zephyr-Core-3.6.0/samples/subsys/mgmt/updatehub/ |
| D | README.rst | 68 Step 1: Build/Flash MCUboot
82 Step 2: Start the UpdateHub Server
85 Step 2.1: UpdateHub-CE (Community Edition)
100 Step 2.2: UpdateHub Cloud
137 Step 3: Configure UpdateHub Sample
158 Step 4: Build UpdateHub App
169 Step 4.1: Build for Ethernet
182 Step 4.2: Build for WiFi
202 Step 4.3: Build for Modem
218 Step 4.4: Build for IEEE 802.15.4 [experimental]
[all …]
|
| /Zephyr-Core-3.6.0/include/zephyr/bluetooth/mesh/ |
| D | sar_cfg.h | 24 /** SAR Segment Interval Step state */
33 /* SAR Unicast Retransmissions Interval Step state */
57 /** SAR Receiver Segment Interval Step state */
|
| /Zephyr-Core-3.6.0/samples/basic/servo_motor/src/ |
| D | main.c | 20 #define STEP PWM_USEC(100) macro
52 pulse_width -= STEP; in main()
55 pulse_width += STEP; in main()
|
| /Zephyr-Core-3.6.0/doc/build/dts/ |
| D | intro.rst | 9 step-by-step guides and examples, see :ref:`dt-howtos`.
|
| /Zephyr-Core-3.6.0/tests/bsim/bluetooth/mesh/tests_scripts/dfu/ |
| D | dfu_cli_all_targets_lost_on_apply.sh | 7 # Test if callback `lost_target` is called on every target failing on Apply step and `ended`
8 # callback is called when all targets are lost at this step.
|
| D | dfu_cli_all_targets_lost_on_verify.sh | 7 # Test if callback `lost_target` is called on every target failing on Verify step and `ended`
8 # callback is called when all targets are lost at this step.
|
| D | dfu_mixed_fail.sh | 7 # Test that confirm step fails with all variants of firmware effect
|
| /Zephyr-Core-3.6.0/tests/drivers/adc/adc_emul/src/ |
| D | main.c | 75 * @param step Common difference in arithmetic sequence which describes how
84 static void check_samples(int expected_count, int32_t start_mv_value, int step, in check_samples() argument
92 expected = start_mv_value + i / num_channels * step; in check_samples()
220 check_samples(samples, input_mv, 0 /* step */, 1 /* channels */, in ZTEST_USER()
259 check_samples(samples * 2, input1_mv, 0 /* step */, 2 /* channels */, in ZTEST_USER()
262 check_samples(samples * 2, input2_mv, 0 /* step */, 2 /* channels */, in ZTEST_USER()
399 check_samples(samples * 2, input2_mv, 0 /* step */, 2 /* channels */, in ZTEST_USER()
439 check_samples(samples * 2, input_mv, 0 /* step */, 2 /* channels */, in ZTEST_USER()
442 check_samples(samples * 2, input_mv, 0 /* step */, 2 /* channels */, in ZTEST_USER()
458 check_samples(samples * 2, input_mv, 0 /* step */, 2 /* channels */, in ZTEST_USER()
[all …]
|
| /Zephyr-Core-3.6.0/tests/drivers/gpio/gpio_api_1pin/src/ |
| D | test_pin_interrupt.c | 229 TC_PRINT("Step 1: Configure pin as active high\n"); in ZTEST()
231 TC_PRINT("Step 2: Configure pin as active low\n"); in ZTEST()
238 TC_PRINT("Step 1: Configure pin as active high\n"); in ZTEST()
240 TC_PRINT("Step 2: Configure pin as active low\n"); in ZTEST()
271 TC_PRINT("Step 1: Configure pin as active high\n"); in ZTEST()
273 TC_PRINT("Step 2: Configure pin as active low\n"); in ZTEST()
280 TC_PRINT("Step 1: Configure pin as active high\n"); in ZTEST()
282 TC_PRINT("Step 2: Configure pin as active low\n"); in ZTEST()
|
| /Zephyr-Core-3.6.0/dts/bindings/input/ |
| D | espressif,esp32-touch-sensor.yaml | 27 filter-jitter-step = <4>;
99 filter-jitter-step:
103 Touch sensor jitter filter step size.
|
| /Zephyr-Core-3.6.0/drivers/input/ |
| D | input_gpio_qdec.c | 130 uint8_t step = 0x00; in gpio_qdec_get_step() local
141 step |= 0x01; in gpio_qdec_get_step()
144 step |= 0x02; in gpio_qdec_get_step()
153 return step; in gpio_qdec_get_step()
163 uint8_t step; in gpio_qdec_sample_timer_timeout() local
171 step = gpio_qdec_get_step(dev); in gpio_qdec_sample_timer_timeout()
173 if (data->prev_step == step) { in gpio_qdec_sample_timer_timeout()
182 switch ((data->prev_step << 4U) | step) { in gpio_qdec_sample_timer_timeout()
199 data->prev_step = step; in gpio_qdec_sample_timer_timeout()
|
| /Zephyr-Core-3.6.0/drivers/sensor/max17262/ |
| D | max17262.c | 253 /** STEP 1 */ in max17262_gauge_init()
268 /** STEP 2 */ in max17262_gauge_init()
275 /* Exit Hibernate Mode step 1 */ in max17262_gauge_init()
281 /* Exit Hibernate Mode step 2 */ in max17262_gauge_init()
287 /* Exit Hibernate Mode step 3 */ in max17262_gauge_init()
293 /** STEP 2.1 --> OPTION 1 EZ Config (No INI file is needed) */ in max17262_gauge_init()
327 * proceed to Step 3 when ModelCFG.Refresh == 0 in max17262_gauge_init()
349 /** STEP 3 */ in max17262_gauge_init()
|
| /Zephyr-Core-3.6.0/doc/connectivity/networking/ |
| D | native_sim_setup.rst | 41 Step 1 - Create Ethernet interface
61 Step 2 - Start app in native_sim board
76 Step 3 - Connect to console (optional)
|
| D | qemu_setup.rst | 49 Step 1 - Create helper socket
61 Step 2 - Start TAP device routing daemon
74 Step 3 - Start app in QEMU
88 If you see an error from QEMU about unix:/tmp/slip.sock, it means you missed Step 1
91 Step 4 - Run apps on host
130 Step 5 - Stop supporting daemons
|
| /Zephyr-Core-3.6.0/doc/services/debugging/ |
| D | gdbstub.rst | 33 * Continue and step the target
172 #. Use command ``s`` or ``step`` to step through program until it reaches
242 #. If step (``s`` or ``step``) is used here, it will continue execution
266 #. Here, ``step`` can be used to go through all code inside :c:func:`test`
282 ``step`` is issued, as in this case. This is due to the assignment
|
| /Zephyr-Core-3.6.0/include/zephyr/bluetooth/audio/ |
| D | vcp.h | 52 /** Initial step size (1-255) */
53 uint8_t step; member
146 * @brief Set the Volume Control Service volume step size.
153 * @param volume_step The volume step size (1-255).
174 * @brief Turn the volume down by one step on the server.
181 * @brief Turn the volume up by one step on the server.
468 * @brief Turn the volume down one step on a remote Volume Renderer
477 * @brief Turn the volume up one step on a remote Volume Renderer
486 * @brief Turn the volume down one step and unmute on a remote Volume Renderer
495 * @brief Turn the volume up one step and unmute on a remote Volume Renderer
|
| /Zephyr-Core-3.6.0/samples/drivers/counter/maxim_ds3231/ |
| D | prj.conf | 11 # Optional step that syncs RTC and local clock. Don't enable this if
|
