| /Zephyr-Core-3.7.0/drivers/display/ |
| D | display_otm8009a.h | 85 /** Panel Type Setting */
87 /* Source Driver Timing Setting */
93 /** RGB Video Mode Setting */
99 /** Power Control Setting 1 */
101 /** Power Control Setting 2 for Normal Mode */
103 /** Power Control Setting 4 for DC Voltage */
117 /** Panel Control Setting 1 */
119 /** Panel Control Setting 2 */
121 /** Panel Control Setting 3 */
123 /** Panel Control Setting 4 */
[all …]
|
| /Zephyr-Core-3.7.0/dts/bindings/pinctrl/ |
| D | ite,it8xxx2-pinctrl-func.yaml | 20 When the alternate setting is configured as func3, in addition to
21 the setting of func3-gcr, some pins require external setting.
42 If KSO[17:0] is in KBS mode, setting 1 selects open-drain mode,
43 setting 0 selects push-pull mode.
49 If KSI[7:0]/KSO[15:0] is in KBS mode , setting 1 enables the internal
50 pull-up (KSO[17:16] setting internal pull-up by GPIO port GPCR register).
56 Default setting pin configure to alternate mode for all GPIO group pins
57 (include KSO[17:16]), otherwise setting pin configure to keyboard scan
|
| /Zephyr-Core-3.7.0/subsys/settings/include/settings/ |
| D | settings_nvs.h | 18 /* In the NVS backend, each setting is stored in two NVS entries:
19 * 1. setting's name
20 * 2. setting's value
22 * The NVS entry ID for the setting's value is determined implicitly based on
23 * the ID of the NVS entry for the setting's name, once that is found. The
27 * Setting's name entries start from NVS_NAMECNT_ID + 1. The entry at
|
| /Zephyr-Core-3.7.0/dts/bindings/display/ |
| D | sitronix,st7789v.yaml | 25 description: VCOM Setting
34 description: VRH Setting
38 description: VDV Setting
48 description: LCM Setting
58 description: Gamma Setting
67 description: Porch Setting
|
| /Zephyr-Core-3.7.0/subsys/net/lib/lwm2m/ |
| D | Kconfig.ipso | 24 This setting establishes the total count of IPSO Temperature
53 This setting establishes the total count of IPSO Generic
93 This setting establishes the total count of IPSO Humidity
124 This setting establishes the total count of IPSO Pressure
149 setting to be controlled as a % between 0 and 100. An optional color
150 setting enables a string to be used to indicate the desired color.
157 This setting establishes the total count of IPSO Light Control
170 This setting establishes the total count of IPSO Accelerometer
199 This setting establishes the total count of IPSO Buzzer
227 This setting establishes the total count of IPSO Timer
[all …]
|
| /Zephyr-Core-3.7.0/subsys/stats/ |
| D | Kconfig | 17 setting is disabled, statistics are assigned generic names of the
18 form "s0", "s1", etc. Enabling this setting simplifies debugging,
27 setting is disabled, statistics are assigned generic names of the
28 form "s0", "s1", etc. Enabling this setting simplifies debugging,
|
| /Zephyr-Core-3.7.0/modules/openthread/platform/ |
| D | settings.c | 20 /* Setting subtree to delete. */
23 /* Current entry index, used to iterate over multiple setting
62 __ASSERT(ret < sizeof(path), "Setting path buffer too small."); in ot_setting_delete_cb()
68 LOG_ERR("Failed to remove setting %s, ret %d", path, in ot_setting_delete_cb()
103 __ASSERT(ret < sizeof(subtree), "Setting path buffer too small."); in ot_setting_delete_subtree()
142 /* Buffer for the setting. */
145 /* Buffer length on input, setting length read on output. */
148 /* Current entry index, used to iterate over multiple setting
176 /* Found setting, break the loop. */ in ot_setting_read_cb()
188 LOG_ERR("Failed to read the setting, ret: %d", ret); in ot_setting_read_cb()
[all …]
|
| /Zephyr-Core-3.7.0/tests/subsys/edac/ibecc/src/ |
| D | ibecc.c | 92 zassert_equal(ret, 0, "Error setting notification callback"); in ZTEST()
127 zassert_equal(ret, 0, "Error setting inject address"); in ZTEST()
131 zassert_not_equal(ret, 0, "Error setting invalid param1"); in ZTEST()
139 zassert_equal(ret, 0, "Error setting inject address mask"); in ZTEST()
143 zassert_not_equal(ret, 0, "Error setting invalid param1"); in ZTEST()
152 zassert_equal(ret, 0, "Error setting inject address"); in ZTEST()
159 zassert_equal(ret, 0, "Error setting inject address mask"); in ZTEST()
178 zassert_equal(ret, 0, "Error setting ctrl"); in test_inject()
187 zassert_equal(ret, 0, "Error setting inject address"); in test_inject()
190 zassert_equal(ret, 0, "Error setting inject address mask"); in test_inject()
[all …]
|
| /Zephyr-Core-3.7.0/modules/trusted-firmware-m/ |
| D | Kconfig.tfm.partitions | 15 Setting this option will cause '-DTFM_PARTITION_PROTECTED_STORAGE'
26 Setting this option will cause '-DTFM_PARTITION_INTERNAL_TRUSTED_STORAGE'
37 Setting this option will cause '-DTFM_PARTITION_CRYPTO'
49 Setting this option will cause '-DTFM_PARTITION_INITIAL_ATTESTATION'
60 Setting this option will cause '-DTFM_PARTITION_PLATFORM'
72 Setting this option will cause '-DTFM_PARTITION_FIRMWARE_UPDATE'
|
| /Zephyr-Core-3.7.0/subsys/net/lib/http/ |
| D | Kconfig | 53 This setting determines the number of http services that the server supports.
60 This setting determines the maximum number of HTTP/2 clients that the server can handle at once.
67 This setting determines the maximum number of HTTP/2 streams for each client.
74 This setting determines the buffer size for each client.
90 This setting determines the maximum length of the HTTP URL that the server can process.
97 This setting determines the maximum length of the HTTP Content-Length field.
122 Allow user to specify wildcards when setting up resource strings.
|
| /Zephyr-Core-3.7.0/soc/ |
| D | Kconfig.v1 | 8 SoC name. The value of this setting must be defined by the selected
14 SoC series. The value of this setting must be defined by the selected
20 SoC family. The value of this setting must be defined by the selected
|
| D | Kconfig.v2 | 15 SoC name. The value of this setting must be defined by the selected
21 SoC series. The value of this setting must be defined by the selected
27 SoC family. The value of this setting must be defined by the selected
|
| /Zephyr-Core-3.7.0/dts/bindings/sensor/ |
| D | invensense,icm42605.yaml | 25 Maps to ACCEL_ODR field in ACCEL_CONFIG0 setting
46 Maps to GYRO_ODR field in GYRO_CONFIG0 setting
64 Maps to ACCEL_FS_SEL field in ACCEL_CONFIG0 setting
76 Maps to GYRO_FS_SEL field in GYRO_CONFIG0 setting
|
| D | invensense,icm42670.yaml | 24 Maps to ACCEL_ODR field in ACCEL_CONFIG0 setting
44 Maps to GYRO_ODR field in GYRO_CONFIG0 setting
61 Maps to ACCEL_FS_SEL field in ACCEL_CONFIG0 setting
74 Maps to GYRO_FS_SEL field in GYRO_CONFIG0 setting
|
| D | invensense,mpu9250.yaml | 35 Maps to DLPF_CFG field in Configuration setting.
51 Maps to GYRO_FS_SEL field in Gyroscope Configuration setting.
63 Maps to ACCEL_FS_SEL field in Accelerometer Configuration setting
75 Maps to DLPF_CFG field in Accelerometer Configuration 2 setting.
|
| /Zephyr-Core-3.7.0/tests/subsys/mgmt/mcumgr/settings_mgmt/src/ |
| D | main.c | 167 zassert_false(set_called, "Did not expect setting set function to be called"); in ZTEST()
168 zassert_false(get_called, "Did not expect setting get function to be called"); in ZTEST()
169 zassert_false(export_called, "Did not expect setting export function to be called"); in ZTEST()
170 zassert_true(commit_called, "Expected setting commit function to be called"); in ZTEST()
222 zassert_false(set_called, "Did not expect setting set function to be called"); in ZTEST()
223 zassert_false(get_called, "Did not expect setting get function to be called"); in ZTEST()
224 zassert_false(export_called, "Did not expect setting export function to be called"); in ZTEST()
225 zassert_false(commit_called, "Did not expect setting commit function to be called"); in ZTEST()
297 zassert_false(set_called, "Did not expect setting set function to be called"); in ZTEST()
298 zassert_false(get_called, "Did not expect setting get function to be called"); in ZTEST()
[all …]
|
| /Zephyr-Core-3.7.0/include/zephyr/sys/ |
| D | sys_io.h | 113 * current setting. It will return the current setting.
126 * current setting and sets it. It will return the previous setting.
139 * current setting and clears it. It will return the previous setting.
283 * current setting. It will return the current setting.
296 * current setting and sets it. It will return the previous setting.
309 * current setting and clears it. It will return the previous setting.
342 * current setting. It will return the current setting.
355 * current setting and sets it. It will return the previous setting.
368 * current setting and clears it. It will return the previous setting.
|
| /Zephyr-Core-3.7.0/dts/bindings/spi/ |
| D | nxp,imx-flexspi.yaml | 20 Enable AHB bufferable write access by setting register field
26 Enable AHB cacheable read access by setting register field
32 Enable AHB read prefetch by setting register field AHBCR[PREFETCHEN].
37 Remove burst start address alignment limitation by setting register
44 setting register field MCR0[COMBINATIONEN].
|
| /Zephyr-Core-3.7.0/subsys/lorawan/services/ |
| D | Kconfig | 50 Initial setting for clock synchronization periodicity in seconds.
55 Default setting: 24h.
98 This setting has significant influence on RAM usage.
117 This setting has significant influence on RAM usage. If the exact
138 This setting has significant influence on RAM usage. If the exact
156 This setting has significant influence on RAM usage.
167 for multicast session key exchange and setting up a class C session.
|
| /Zephyr-Core-3.7.0/drivers/modem/ |
| D | Kconfig.quectel-bg9x | 14 Choose this setting to enable quectel BG9x LTE-CatM1/NB-IoT modem
37 This setting is used to set the APN name for the network connection
45 This setting is used to set the User name for the network connection
53 This setting is used to set the Password for the network connection
|
| D | Kconfig.ublox-sara-r4 | 15 Choose this setting to enable u-blox SARA-R4 LTE-CatM1/NB-IoT modem
59 This setting is used in the AT+CGDCONT command to set the APN name
79 This setting is used in the AT+COPS command to set the MCC/MNO
96 Choose this setting to use a modem GPIO pin as network indication.
104 This setting is used to configure one of the modem's GPIO pins
|
| /Zephyr-Core-3.7.0/subsys/bluetooth/audio/ |
| D | Kconfig.mcs | 159 bool "Support setting Track Position"
162 This option enables support for setting Track Position.
171 bool "Support setting Playback Speed"
174 This option enables support for setting Playback Speed.
189 bool "Support setting Playing Order"
192 This option enables support for setting Playing Order.
207 bool "Support setting Media Control Point"
210 This option enables support for setting Media Control Point.
|
| /Zephyr-Core-3.7.0/dts/bindings/regulator/ |
| D | regulator.yaml | 152 indicates that protection should be enabled but limit setting can be
161 should be enabled but limit setting can be omitted.
170 limit setting can be omitted.
177 indicates that protection should be enabled but limit setting can be
186 should be enabled but limit setting can be omitted. Limit is given as
196 limit setting can be omitted. Limit is given as microvolt offset from
204 value '1' indicates that protection should be enabled but limit setting
214 should be enabled but limit setting can be omitted. Limit is given as
224 but limit setting can be omitted. Limit is given as microvolt offset from
232 value '1' indicates that protection should be enabled but limit setting
[all …]
|
| /Zephyr-Core-3.7.0/drivers/clock_control/ |
| D | clock_control_npcx.c | 157 BUILD_ASSERT(OFMCLK <= MAX_OFMCLK, "Exceed maximum OFMCLK setting");
161 "Invalid CORE_CLK setting");
164 "Invalid FIUCLK setting");
168 "Invalid FIU1CLK setting");
172 "Invalid AHB6_CLK setting");
176 "Invalid APB1_CLK setting");
180 "Invalid APB2_CLK setting");
184 "Invalid APB3_CLK setting");
189 "Invalid APB4_CLK setting");
194 "Invalid MCLKD_SL setting");
[all …]
|
| /Zephyr-Core-3.7.0/tests/bluetooth/host/id/bt_id_set_adv_random_addr/src/ |
| D | test_suite_invalid_cases.c | 22 * Test setting advertise random address while passing a NULL value as a reference to
39 * Test setting advertise random address while passing a NULL value as an address reference
57 * Test setting advertise random address while passing a NULL value for the advertise parameters
74 * Test setting advertising random address while 'CONFIG_BT_EXT_ADV' is enabled
103 * Test setting advertising random address while 'CONFIG_BT_EXT_ADV' is enabled
|
