| /Zephyr-Core-2.7.6/boards/arm/atsamd20_xpro/ |
| D | pinmux.c | 32 #warning Pin mapping may not be configured in board_pinmux_init()
35 #warning Pin mapping may not be configured in board_pinmux_init()
38 #warning Pin mapping may not be configured in board_pinmux_init()
41 #warning Pin mapping may not be configured in board_pinmux_init()
44 #warning Pin mapping may not be configured in board_pinmux_init()
48 #warning Pin mapping may not be configured in board_pinmux_init()
51 #warning Pin mapping may not be configured in board_pinmux_init()
59 #warning Pin mapping may not be configured in board_pinmux_init()
62 #warning Pin mapping may not be configured in board_pinmux_init()
65 #warning Pin mapping may not be configured in board_pinmux_init()
|
| /Zephyr-Core-2.7.6/boards/arm/atsame54_xpro/ |
| D | pinmux.c | 34 #warning Pin mapping may not be configured in board_pinmux_init()
37 #warning Pin mapping may not be configured in board_pinmux_init()
40 #warning Pin mapping may not be configured in board_pinmux_init()
43 #warning Pin mapping may not be configured in board_pinmux_init()
52 #warning Pin mapping may not be configured in board_pinmux_init()
55 #warning Pin mapping may not be configured in board_pinmux_init()
58 #warning Pin mapping may not be configured in board_pinmux_init()
62 #warning Pin mapping may not be configured in board_pinmux_init()
65 #warning Pin mapping may not be configured in board_pinmux_init()
68 #warning Pin mapping may not be configured in board_pinmux_init()
[all …]
|
| /Zephyr-Core-2.7.6/boards/arm/mimxrt685_evk/ |
| D | pinmux.c | 16 uint32_t port0_pin1_config = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */ in mimxrt685_evk_pinmux_init()
34 /* PORT0 PIN1 (coords: G2) is configured as FC0_TXD_SCL_MISO_WS */ in mimxrt685_evk_pinmux_init()
37 uint32_t port0_pin2_config = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */ in mimxrt685_evk_pinmux_init()
55 /* PORT0 PIN2 (coords: G4) is configured as FC0_RXD_SDA_MOSI_DATA */ in mimxrt685_evk_pinmux_init()
60 uint32_t port1_pin1_config = (/* Pin is configured as PIO1_1 */ in mimxrt685_evk_pinmux_init()
78 /* PORT1 PIN1 (coords: G15) is configured as PIO1_1 */ in mimxrt685_evk_pinmux_init()
83 uint32_t port0_pin10_config = (/* Pin is configured as PIO0_10 */ in mimxrt685_evk_pinmux_init()
101 /* PORT0 PIN10 (coords: J3) is configured as PIO0_10 */ in mimxrt685_evk_pinmux_init()
106 uint32_t port0_pin14_config = (/* Pin is configured as PIO0_14 */ in mimxrt685_evk_pinmux_init()
124 /* PORT0 PIN14 (coords: A3) is configured as PIO0_14 */ in mimxrt685_evk_pinmux_init()
[all …]
|
| /Zephyr-Core-2.7.6/boards/arm/adafruit_feather_m0_basic_proto/ |
| D | pinmux.c | 33 #warning Pin mapping may not be configured in board_pinmux_init()
36 #warning Pin mapping may not be configured in board_pinmux_init()
39 #warning Pin mapping may not be configured in board_pinmux_init()
42 #warning Pin mapping may not be configured in board_pinmux_init()
45 #warning Pin mapping may not be configured in board_pinmux_init()
54 #warning Pin mapping may not be configured in board_pinmux_init()
57 #warning Pin mapping may not be configured in board_pinmux_init()
60 #warning Pin mapping may not be configured in board_pinmux_init()
63 #warning Pin mapping may not be configured in board_pinmux_init()
66 #warning Pin mapping may not be configured in board_pinmux_init()
|
| /Zephyr-Core-2.7.6/boards/arm/seeeduino_xiao/ |
| D | pinmux.c | 32 #warning Pin mapping may not be configured in board_pinmux_init()
35 #warning Pin mapping may not be configured in board_pinmux_init()
38 #warning Pin mapping may not be configured in board_pinmux_init()
41 #warning Pin mapping may not be configured in board_pinmux_init()
44 #warning Pin mapping may not be configured in board_pinmux_init()
55 #warning Pin mapping may not be configured in board_pinmux_init()
58 #warning Pin mapping may not be configured in board_pinmux_init()
61 #warning Pin mapping may not be configured in board_pinmux_init()
64 #warning Pin mapping may not be configured in board_pinmux_init()
67 #warning Pin mapping may not be configured in board_pinmux_init()
|
| /Zephyr-Core-2.7.6/tests/drivers/gpio/gpio_api_1pin/src/ |
| D | test_config.c | 46 * gpio_pin_set_raw function if pin is configured as an input.
117 * gpio_pin_set_raw function if pin is configured as an input. in test_gpio_pin_configure_push_pull()
141 * - Verify that pin configured in Open Drain mode and initialized
142 * to high results in pin high value if the same pin configured
145 * - Setting pin configured in Open Drain mode to low results in
146 * pin low value if the same pin configured as input is high.
147 * - Verify that pin configured in Open Source mode and
149 * configured as input is high. Drivers that do not support Open
151 * - Verify that pin configured in Open Source mode and
153 * configured as input is low. Drivers that do not support Open
[all …]
|
| /Zephyr-Core-2.7.6/boards/arm/atsamd21_xpro/ |
| D | pinmux.c | 26 #warning Pin mapping may not be configured in board_pinmux_init()
29 #warning Pin mapping may not be configured in board_pinmux_init()
32 #warning Pin mapping may not be configured in board_pinmux_init()
35 #warning Pin mapping may not be configured in board_pinmux_init()
38 #warning Pin mapping may not be configured in board_pinmux_init()
48 #warning Pin mapping may not be configured in board_pinmux_init()
51 #warning Pin mapping may not be configured in board_pinmux_init()
59 #warning Pin mapping may not be configured in board_pinmux_init()
62 #warning Pin mapping may not be configured in board_pinmux_init()
65 #warning Pin mapping may not be configured in board_pinmux_init()
|
| /Zephyr-Core-2.7.6/boards/arm/arduino_nano_33_iot/ |
| D | pinmux.c | 39 #warning Pin mapping may not be configured in board_pinmux_init()
42 #warning Pin mapping may not be configured in board_pinmux_init()
45 #warning Pin mapping may not be configured in board_pinmux_init()
48 #warning Pin mapping may not be configured in board_pinmux_init()
59 #warning Pin mapping may not be configured in board_pinmux_init()
62 #warning Pin mapping may not be configured in board_pinmux_init()
65 #warning Pin mapping may not be configured in board_pinmux_init()
68 #warning Pin mapping may not be configured in board_pinmux_init()
71 #warning Pin mapping may not be configured in board_pinmux_init()
|
| /Zephyr-Core-2.7.6/boards/arm/atsamr21_xpro/ |
| D | pinmux.c | 31 #warning Pin mapping may not be configured in board_pinmux_init()
34 #warning Pin mapping may not be configured in board_pinmux_init()
37 #warning Pin mapping may not be configured in board_pinmux_init()
40 #warning Pin mapping may not be configured in board_pinmux_init()
62 #warning Pin mapping may not be configured in board_pinmux_init()
70 #warning Pin mapping may not be configured in board_pinmux_init()
73 #warning Pin mapping may not be configured in board_pinmux_init()
76 #warning Pin mapping may not be configured in board_pinmux_init()
79 #warning Pin mapping may not be configured in board_pinmux_init()
|
| /Zephyr-Core-2.7.6/boards/arm/lpcxpresso55s69/ |
| D | pinmux.c | 121 /* PORT1 PIN20 is configured as FC4_TXD_SCL_MISO_WS */ in lpcxpresso_55s69_pinmux_init()
129 /* PORT1 PIN21 is configured as FC4_RXD_SDA_MOSI_DATA */ in lpcxpresso_55s69_pinmux_init()
149 /* PORT0 PIN26 is configured as HS_SPI_MOSI */ in lpcxpresso_55s69_pinmux_init()
161 /* PORT1 PIN1 is configured as HS_SPI_SSEL1 */ in lpcxpresso_55s69_pinmux_init()
169 /* PORT1 PIN2 is configured as HS_SPI_SCK */ in lpcxpresso_55s69_pinmux_init()
177 /* PORT1 PIN3 is configured as HS_SPI_MISO */ in lpcxpresso_55s69_pinmux_init()
216 /* Pin is configured as FC7_TXD_SCL_MISO_WS */ in lpcxpresso_55s69_pinmux_init()
224 /* Pin is configured as FC7_RXD_SDA_MOSI_DATA */ in lpcxpresso_55s69_pinmux_init()
232 /* Pin is configured as FC7_SCK */ in lpcxpresso_55s69_pinmux_init()
240 /* Pin is configured as FC6_RXD_SDA_MOSI_DATA */ in lpcxpresso_55s69_pinmux_init()
|
| /Zephyr-Core-2.7.6/boards/arm/arduino_zero/ |
| D | pinmux.c | 33 #warning Pin mapping may not be configured in board_pinmux_init()
36 #warning Pin mapping may not be configured in board_pinmux_init()
39 #warning Pin mapping may not be configured in board_pinmux_init()
42 #warning Pin mapping may not be configured in board_pinmux_init()
45 #warning Pin mapping may not be configured in board_pinmux_init()
|
| /Zephyr-Core-2.7.6/doc/reference/bluetooth/mesh/ |
| D | heartbeat.rst | 9 The Heartbeat feature is configured through the :ref:`bluetooth_mesh_models_cfg_srv` model.
36 publication can be configured to stop after a certain number of messages, or
48 A node can be configured to subscribe to Heartbeat messages from one node at
50 match the configured subscription parameters.
56 All Heartbeats received with the configured subscription parameters are passed
|
| /Zephyr-Core-2.7.6/boards/arm/lpcxpresso54114/ |
| D | pinmux.c | 113 /* PORT0 PIN25 is configured as FC4_RTS_SCL_SSEL1 */ in lpcxpresso_54114_pinmux_init()
122 /* PORT0 PIN26 is configured as FC4_CTS_SDA_SSEL0 */ in lpcxpresso_54114_pinmux_init()
133 /* PORT0 PIN18 is configured as FC5_TXD_SCL_MISO */ in lpcxpresso_54114_pinmux_init()
141 /* PORT0 PIN19 is configured as FC5_SCK-SPIFI_CSn */ in lpcxpresso_54114_pinmux_init()
149 /* PORT0 PIN20 is configured as FC5_RXD_SDA_MOSI */ in lpcxpresso_54114_pinmux_init()
157 /* PORT1 PIN1 is configured as FC5_SSEL2 */ in lpcxpresso_54114_pinmux_init()
|
| /Zephyr-Core-2.7.6/boards/arm/lpcxpresso55s28/ |
| D | pinmux.c | 94 /* PORT1 PIN20 is configured as FC4_TXD_SCL_MISO_WS */ in lpcxpresso_55s28_pinmux_init()
102 /* PORT1 PIN21 is configured as FC4_RXD_SDA_MOSI_DATA */ in lpcxpresso_55s28_pinmux_init()
122 /* PORT0 PIN26 is configured as HS_SPI_MOSI */ in lpcxpresso_55s28_pinmux_init()
134 /* PORT1 PIN1 is configured as HS_SPI_SSEL1 */ in lpcxpresso_55s28_pinmux_init()
142 /* PORT1 PIN2 is configured as HS_SPI_SCK */ in lpcxpresso_55s28_pinmux_init()
150 /* PORT1 PIN3 is configured as HS_SPI_MISO */ in lpcxpresso_55s28_pinmux_init()
|
| /Zephyr-Core-2.7.6/tests/bluetooth/bsim_bt/bsim_test_mesh/tests_scripts/persistence/ |
| D | access.sh | 16 -argstest access-cfg=configured
20 -argstest access-cfg=configured
32 -argstest access-cfg=not-configured
|
| /Zephyr-Core-2.7.6/tests/boards/intel_s1000_crb/main/ |
| D | README.txt | 11 - GPIO_23 configured as input
12 - GPIO_24 configured as output and interrupt capable
15 also calls its callback function if interrupt is configured
18 - Intel S1000 CRB I2C configured as master, 7 bit mode, standard speed
19 - 2 LED matrices are configured as slaves
|
| /Zephyr-Core-2.7.6/boards/arm/adafruit_trinket_m0/ |
| D | pinmux.c | 35 #warning Pin mapping may not be configured in board_pinmux_init()
38 #warning Pin mapping may not be configured in board_pinmux_init()
41 #warning Pin mapping may not be configured in board_pinmux_init()
44 #warning Pin mapping may not be configured in board_pinmux_init()
|
| /Zephyr-Core-2.7.6/boards/arm/adafruit_itsybitsy_m4_express/ |
| D | pinmux.c | 33 #warning Pin mapping may not be configured in board_pinmux_init()
36 #warning Pin mapping may not be configured in board_pinmux_init()
39 #warning Pin mapping may not be configured in board_pinmux_init()
42 #warning Pin mapping may not be configured in board_pinmux_init()
|
| /Zephyr-Core-2.7.6/boards/arm/lpcxpresso55s16/ |
| D | pinmux.c | 123 /* PORT1 PIN20 is configured as FC4_TXD_SCL_MISO_WS */ in lpcxpresso_55s16_pinmux_init()
131 /* PORT1 PIN21 is configured as FC4_RXD_SDA_MOSI_DATA */ in lpcxpresso_55s16_pinmux_init()
151 /* PORT0 PIN26 is configured as HS_SPI_MOSI */ in lpcxpresso_55s16_pinmux_init()
159 /* PORT1 PIN1 is configured as HS_SPI_SSEL1 */ in lpcxpresso_55s16_pinmux_init()
167 /* PORT1 PIN2 is configured as HS_SPI_SCK */ in lpcxpresso_55s16_pinmux_init()
175 /* PORT1 PIN3 is configured as HS_SPI_MISO */ in lpcxpresso_55s16_pinmux_init()
|
| /Zephyr-Core-2.7.6/drivers/espi/ |
| D | Kconfig | 67 early in the flow after the VW channel is configured. Or it could be
68 until flash channel is configured.
108 the private channel. Please ensure the Host code is configured to use
136 ensure the Host code is configured to use for accessing ACPI response
153 result. Please ensure the Host code is configured to use for accessing
164 response data. Please ensure the Host code is configured to use for
|
| /Zephyr-Core-2.7.6/dts/bindings/display/ |
| D | gooddisplay,gd7965.yaml | 27 If connected directly the MCU pin should be configured
36 If connected directly the MCU pin should be configured
45 If connected directly the MCU pin should be configured
|
| /Zephyr-Core-2.7.6/dts/bindings/misc/ |
| D | nuvoton,npcx-booter-variant.yaml | 13 The host interface type (LPC/eSPI/SHI) is configured by booter
14 if true; otherwise, it should be configured by the firmware.
|
| /Zephyr-Core-2.7.6/subsys/usb/class/ |
| D | bt_h4.c | 41 static bool configured; variable
156 configured = false; in bt_h4_status_cb()
159 LOG_DBG("Device configured"); in bt_h4_status_cb()
160 if (!configured) { in bt_h4_status_cb()
161 configured = true; in bt_h4_status_cb()
173 configured = false; in bt_h4_status_cb()
183 if (configured) { in bt_h4_status_cb()
|
| /Zephyr-Core-2.7.6/dts/bindings/ieee802154/ |
| D | nxp,mcr20a.yaml | 17 If connected directly the MCU pin should be configured
26 If connected directly the MCU pin should be configured
|
| /Zephyr-Core-2.7.6/doc/reference/kernel/threads/ |
| D | system_threads.rst | 19 By default, the main thread uses the highest configured preemptible thread
20 priority (i.e. 0). If the kernel is not configured to support preemptible
21 threads, the main thread uses the lowest configured cooperative thread
37 The idle thread always uses the lowest configured thread priority.
|
