| /Zephyr-Core-3.5.0/drivers/display/ |
| D | Kconfig | 1 # Display drivers
6 menuconfig DISPLAY config
7 bool "Display controller drivers"
9 Enable display drivers
11 if DISPLAY
14 int "Display devices init priority"
17 Display devices initialization priority.
19 module = DISPLAY
20 module-str = display
23 source "drivers/display/Kconfig.mcux_elcdif"
[all …]
|
| D | Kconfig.mcux_elcdif | 21 framebuffers are required to support partial display updates.
29 set to display an empty buffer during initialization. This means
30 the display will show what is effectively a dump of
36 bool "Use PXP for display rotation"
40 Use the PXP for display rotation. This requires the LCDIF node
44 display.
57 bool "Rotate display by 0 degrees"
59 Rotate display by 0 degrees. Primarily useful for testing,
63 bool "Rotate display by 90 degrees"
65 Rotate display clockwise by 90 degrees
[all …]
|
| D | Kconfig.ili9xxx | 1 # ILI9XXX display driver configuration options
14 bool "ILI9340 display driver"
20 Enable driver for ILI9340 display driver.
23 bool "ILI9341 display driver"
29 Enable driver for ILI9341 display driver.
32 bool "ILI9342C display driver"
38 Enable driver for ILI9342C display driver.
41 bool "ILI9488 display driver"
47 Enable driver for ILI9488 display driver.
|
| D | Kconfig.sdl | 1 # SDL based emulated display configuration options
7 bool "SDL based emulated display"
12 Enable SDL based emulated display compliant with display driver API.
20 Default pixel format to be used by the display
|
| D | Kconfig.microbit | 1 # Microbit display driver configuration options
7 bool "BBC micro:bit 5x5 LED Display support"
11 Enable this to be able to display images and text on the 5x5
12 LED matrix display on the BBC micro:bit.
15 int "Maximum length of strings that can be shown on the display"
|
| D | Kconfig.dummy | 1 # Configuration options for dummy display
7 bool "Dummy display driver"
9 Enable dummy display driver compliant with display driver API.
|
| D | Kconfig.st7789v | 1 # ST7789V display driver configuration options
7 bool "ST7789V display driver"
12 Enable driver for ST7789V display driver.
19 Specify the color pixel format for the ST7789V display controller.
|
| /Zephyr-Core-3.5.0/samples/drivers/display/ |
| D | sample.yaml | 5 sample.display.shield.adafruit_2_8_tft_touch_v2:
20 - display
25 sample.display.shield.ssd1306_128x32:
29 - display
34 sample.display.shield.ssd1306_128x64:
38 - display
43 sample.display.shield.waveshare_epaper_gdeh0213b1:
49 sample.display.shield.waveshare_epaper_gdew042t2:
55 sample.display.st7789v_tl019fqv01:
59 - display
[all …]
|
| D | README.rst | 1 .. zephyr:code-sample:: display
2 :name: Display
5 Draw basic rectangles on a display device.
10 This sample will draw some basic rectangles onto the display.
21 As this is a generic sample it should work with any display supported by Zephyr.
27 :zephyr-app: samples/drivers/display
37 :zephyr-app: samples/drivers/display
42 List of Arduino-based display shields
|
| /Zephyr-Core-3.5.0/samples/subsys/display/cfb_custom_font/src/ |
| D | main.c | 9 #include <zephyr/display/cfb.h>
16 const struct device *const display = DEVICE_DT_GET(DT_CHOSEN(zephyr_display)); in main() local
19 if (!device_is_ready(display)) { in main()
20 printk("Display device not ready\n"); in main()
23 if (display_set_pixel_format(display, PIXEL_FORMAT_MONO10) != 0) { in main()
24 if (display_set_pixel_format(display, PIXEL_FORMAT_MONO01) != 0) { in main()
30 if (display_blanking_off(display) != 0) { in main()
31 printk("Failed to turn off display blanking\n"); in main()
35 err = cfb_framebuffer_init(display); in main()
40 err = cfb_framebuffer_clear(display, true); in main()
[all …]
|
| /Zephyr-Core-3.5.0/samples/subsys/display/lvgl/ |
| D | sample.yaml | 5 sample.display.lvgl.gui:
6 filter: dt_chosen_enabled("zephyr,display")
9 # the display buffer, but a minimum is also required for the system itself.
16 - display
23 sample.display.lvgl.rk055hdmipi4m:
25 # a display shield to work with LVGL
27 # The minimum RAM needed for this display is actually around 8MB,
28 # but the RT595 uses external PSRAM for the display buffer
33 - display
|
| /Zephyr-Core-3.5.0/include/zephyr/drivers/ |
| D | display.h | 9 * @brief Public API for display drivers and applications
16 * @brief Display Interface
17 * @defgroup display_interface Display Interface
26 #include <zephyr/dt-bindings/display/panel.h>
33 * @brief Display pixel formats
35 * Display pixel format enumeration.
50 * @brief Bits required per pixel for display format
52 * This macro expands to the number of bits required for a given display
54 * display format type
76 * Electrophoretic Display.
[all …]
|
| D | auxdisplay.h | 9 * @brief Public API for auxiliary (textual/non-graphical) display drivers
16 * @brief Auxiliary (Text) Display Interface
17 * @defgroup auxdisplay_interface Text Display Interface
34 /** @brief Used to describe the mode of an auxiliary (text) display */
37 /** @brief Used for moving the cursor or display position */
42 /** Shifts current position by +/- X,Y position, does not take display direction into
47 /** Shifts current position by +/- X,Y position, takes display direction into
67 * display/driver, both minimum and maximum will be AUXDISPLAY_LIGHT_NOT_SUPPORTED.
77 /** @brief Structure holding display capabilities. */
85 /** Display-specific data (e.g. 4-bit or 8-bit mode for HD44780-based displays) */
[all …]
|
| /Zephyr-Core-3.5.0/include/zephyr/display/ |
| D | mb_display.h | 2 * @brief BBC micro:bit display APIs.
15 * @brief BBC micro:bit display APIs
16 * @defgroup mb_display BBC micro:bit display APIs
32 * @brief Representation of a BBC micro:bit display image.
51 * @brief Display mode.
59 /** Display images sequentially, one at a time. */
62 /** Display images by scrolling. */
65 /* Display flags, i.e. modifiers to the chosen mode */
99 * @brief Opaque struct representing the BBC micro:bit display.
105 * https://lancaster-university.github.io/microbit-docs/ubit/display/
[all …]
|
| /Zephyr-Core-3.5.0/tests/lib/gui/lvgl/ |
| D | testcase.yaml | 4 - display
10 - display
19 - display
28 - display
35 - display
42 - display
49 - display
|
| /Zephyr-Core-3.5.0/dts/bindings/display/ |
| D | sharp,ls0xx.yaml | 4 description: Sharp memory display controller
8 include: [spi-device.yaml, display-controller.yaml]
23 datasheet of particular display. Higher frequency gives better
28 description: DISPLAY pin
30 The DISPLAY pin controls if the LCD displays memory contents or
32 initialization. display blanking apis can be used to control it.
|
| D | ilitek,ili9xxx-common.yaml | 5 description: ILI9XXX display controllers common properties.
7 include: [spi-device.yaml, display-controller.yaml]
34 Display pixel format. Note that when RGB888 pixel format is selected
47 Display rotation (CW) in degrees.
49 display-inversion:
52 Display inversion mode. Every bit is inverted from the frame memory to
53 the display.
|
| /Zephyr-Core-3.5.0/samples/drivers/auxdisplay/ |
| D | README.rst | 2 :name: Auxiliary display
5 Output "Hello World" to an auxiliary display.
10 This sample shows how to use the :ref:`auxiliary display driver <auxdisplay_api>`
16 Note that this sample requires a board with an auxiliary display setup. A
18 HD44780-compatible 20 character by 4 line display. See the overlay file
29 If successful, the display will show `Hello World from <board>`.
|
| /Zephyr-Core-3.5.0/drivers/auxdisplay/ |
| D | Kconfig | 1 # Auxiliary Display drivers
7 bool "Auxiliary (textual) Display Drivers"
9 Enable auxiliary/texual display drivers (e.g. alphanumerical displays)
14 int "Auxiliary display devices init priority"
17 Auxiliary (textual) display devices initialization priority.
|
| /Zephyr-Core-3.5.0/boards/shields/rk055hdmipi4m/ |
| D | Kconfig.defconfig | 6 if DISPLAY
8 # Enable MIPI DSI, as this display controller requires it.
13 endif # DISPLAY
23 # LVGL should allocate buffers equal to size of display
32 # display refreshes, which is not necessary for the eLCDIF driver
|
| /Zephyr-Core-3.5.0/samples/subsys/display/cfb_shell/ |
| D | README.rst | 5 Use the CFB shell module to interact with a monochrome display.
18 :zephyr-app: samples/subsys/display/cfb_shell
43 **init**: should be called first to initialize the display.
51 Display Cleared
53 **get_device**: prints the display device name.
62 **get_param**: get the display parameters where height, width and ppt
99 **invert**: invert the pixel color of the display.
110 of the display the remaining characters will be displayed on the next line. The
121 marks when it contains spaces. If the text hits the edge of the display, the
123 until it hits the display boundary, last column for horizontal and last row
[all …]
|
| D | sample.yaml | 2 harness: display
3 tags: display
8 sample.display.cfb_shell.ssd1306:
12 sample.display.cfb_shell.ssd16xx:
|
| /Zephyr-Core-3.5.0/samples/drivers/misc/ft800/ |
| D | sample.yaml | 2 name: FT800 display sample
4 sample.display.ft800:
7 - display
11 harness: display
|
| /Zephyr-Core-3.5.0/boards/shields/rk055hdmipi4ma0/ |
| D | Kconfig.defconfig | 6 if DISPLAY
8 # Enable MIPI DSI, as this display controller requires it.
13 endif # DISPLAY
25 # LVGL should allocate buffers equal to size of display
34 # display refreshes, which is not necessary for the eLCDIF driver
|
| /Zephyr-Core-3.5.0/samples/subsys/display/cfb/ |
| D | sample.yaml | 2 harness: display
3 tags: display
8 sample.display.cfb.ssd1306:
12 sample.display.cfb.ssd16xx:
|
