Searched full:d1 (Results 1 – 25 of 225) sorted by relevance
123456789
| /Zephyr-Core-3.5.0/tests/drivers/gpio/gpio_basic_api/boards/ |
| D | gd32f450i_eval.overlay | 10 /* unplug camera from JP27 and bridge D0-D1 (pins 16 and 15) */
12 in-gpios = <&gpioc 7 0>; /* DCI D1 (JP27 pin 15) */
|
| D | nucleo_f429zi.overlay | 11 in-gpios = <&arduino_header 7 0>; /* Arduino D1 */
|
| D | lpcxpresso54114_m4.overlay | 11 in-gpios = <&gpio0 9 0>; /* Arduino D1 */
|
| D | nucleo_f746zg.overlay | 11 in-gpios = <&arduino_header 7 0>; /* Arduino D1 */
|
| D | nucleo_l4r5zi.overlay | 11 in-gpios = <&arduino_header 7 0>; /* Arduino D1 */
|
| D | disco_l475_iot1.overlay | 11 in-gpios = <&arduino_header 7 0>; /* Arduino D1 */
|
| D | nrf52840dk_nrf52840.overlay | 11 in-gpios = <&gpio1 2 0>; /* Arduino D1 */
|
| D | frdm_k64f.overlay | 11 in-gpios = <&gpioc 17 0>; /* Arduino D1 */
|
| D | mimxrt1050_evk.overlay | 11 in-gpios = <&gpio1 22 0>; /* Arduino D1 */
|
| D | mimxrt1060_evk.overlay | 11 in-gpios = <&gpio1 22 0>; /* Arduino D1 */
|
| D | numaker_pfm_m467.overlay | 11 in-gpios = <&gpiob 3 0>; /* UNO D1 */
|
| D | rv32m1_vega_ri5cy.overlay | 11 in-gpios = <&arduino_header 7 0>; /* Arduino D1 */
|
| D | efr32mg_sltb004a.overlay | 11 in-gpios = <&gpiof 5 0>; /* Arduino D1 */
|
| /Zephyr-Core-3.5.0/doc/kernel/iterable_sections/ |
| D | index.rst | 31 DEFINE_DATA(d1, 1, 2);
62 above would visit ``d1``, ``d2`` and ``d3`` in that order, regardless of how
|
| /Zephyr-Core-3.5.0/tests/drivers/regulator/fixed/boards/ |
| D | nrf52840dk_nrf52840.overlay | 14 /* Arduino D1 */
|
| /Zephyr-Core-3.5.0/dts/bindings/clock/ |
| D | st,stm32h7-rcc.yaml | 54 D1 Domain, CPU1 clock prescaler. Sets a HCLK frequency (feeding Cortex-M Systick)
80 D1 domain, APB3 peripheral prescaler
|
| /Zephyr-Core-3.5.0/boards/arm/numaker_pfm_m467/ |
| D | numaker_pfm_m467-pinctrl.dtsi | 17 /* TX/RX/RTS/CTS/RST --> D1/D0/A2/A3/D2 --> PB3/PB2/PB8/PB9/PC9 */
|
| /Zephyr-Core-3.5.0/boards/xtensa/m5stack_core2/ |
| D | grove_connectors.dtsi | 14 <1 0 &gpio1 0 0>; /* D1/SDA/TX */
|
| /Zephyr-Core-3.5.0/boards/shields/arduino_uno_click/ |
| D | arduino_uno_click.overlay | 24 <9 0 &arduino_header 7 0>, /* TX -> D1 */
47 <9 0 &arduino_header 7 0>, /* TX -> D1 */
|
| /Zephyr-Core-3.5.0/tests/drivers/pwm/pwm_loopback/boards/ |
| D | nucleo_wba52cg.overlay | 31 pinctrl-0 = <&tim3_ch1_pb5>; /* PB5 D1 */
|
| /Zephyr-Core-3.5.0/boards/arm/wio_terminal/ |
| D | grove_connectors.dtsi | 13 <1 0 &portb 9 0>; /* A1/D1 */
|
| /Zephyr-Core-3.5.0/boards/shields/wnc_m14a2a/boards/ |
| D | frdm_k64f.overlay | 19 mdm-boot-mode-sel-gpios = <&arduino_header 7 GPIO_ACTIVE_HIGH>; /* D1 */
|
| /Zephyr-Core-3.5.0/dts/bindings/gpio/ |
| D | seeed-xiao-header.yaml | 23 1 D1 GND -
|
| /Zephyr-Core-3.5.0/boards/xtensa/heltec_wifi_lora32_v2/ |
| D | heltec_wifi_lora32_v2.dts | 106 /* SX1276 D1 -> GPIO35 */
108 /* SX1276 D1 -> GPIO34 */
|
| /Zephyr-Core-3.5.0/boards/xtensa/xiao_esp32s3/ |
| D | seeed_xiao_connector.dtsi | 14 <1 0 &gpio0 2 0>, /* D1 */
|
123456789
