Home
last modified time | relevance | path

Searched +full:d0 +full:- +full:d4 (Results 1 – 25 of 207) sorted by relevance

123456789

/Zephyr-latest/dts/bindings/gpio/
Dnxp,cam-44pins-connector.yaml2 # SPDX-License-Identifier: Apache-2.0
5 GPIO pins exposed on NXP 44-pin board-to-board camera connector.
23 30 MIPI_CSI_DN0/D4 MIPI_CSI_DN0/D4 29
27 38 DOVDD D0 37
31 compatible: "nxp,cam-44pins-connector"
33 include: [gpio-nexus.yaml, base.yaml]
Darduino-header-r3.yaml3 # SPDX-License-Identifier: Apache-2.0
11 Proceeding counter-clockwise:
12 * An 8-pin Power Supply header. No pins on this header are exposed
14 * A 6-pin Analog Input header. This has analog input signals
16 * An 8-pin header (opposite Analog Input). This has digital input
17 signals labeled from D0 at the bottom D7 at the top;
18 * A 10-pin header (opposite Power Supply). This has six additional
25 correspond to D0 through D15, as depicted below:
29 AREF -
30 GND -
[all …]
Darduino-mkr-header.yaml2 # SPDX-License-Identifier: Apache-2.0
9 * One side of the 14-pin header is analog inputs and digital signals.
12 D0-D5 is a digital output.
13 * The other side 14-pin header is power supplies and peripheral interface.
18 through 14 correspond to D0 through D21, and parent pins 15 through 21
21 - AREF 5V -
22 15 A0/D15/DAC0 VIN -
23 16 A1/D16 VCC -
24 17 A2/D17 GND -
25 18 A3/D18 RESET -
[all …]
Darduino-nano-header-r3.yaml2 # SPDX-License-Identifier: Apache-2.0
9 * A 15-pin header with mostly digital signals. The additional NRST (pin3)
11 * A 15-pin Analog Input and power supply header. This has analog input
16 through 13 correspond to D0 through D13, and parent pins 14 through 21
19 1 D1 VIN -
20 0 D0 GND -
21 - RESET RESET -
22 - GND 5V -
25 4 D4 A5/D19 19
31 10 D10 AREF -
[all …]
Dpanasonic,reduced-arduino-header.yaml2 # SPDX-License-Identifier: Apache-2.0
9 AREF -
10 GND -
11 - N/C D13 19
12 - IOREF D12 18
13 - RESET D11 17
14 - 3V3 D10 16
15 - 5V D9 NC
16 - GND D8 NC
17 - GND
[all …]
Dnxp,parallel-lcd-connector.yaml2 # SPDX-License-Identifier: Apache-2.0
5 compatible: "nxp,parallel-lcd-connector"
17 5-7 GND
18 8-12 LCD D11-D15
19 13-14 GND
20 15-20 LCD D5-D10
21 21-23 GND
22 24-28 LCD D0-D4
31 37-40 NC
33 include: [gpio-nexus.yaml, base.yaml]
Dsparkfun-pro-micro-header.yaml2 # SPDX-License-Identifier: Apache-2.0
10 Proceeding counter-clockwise:
11 * A 12-pin Power and Digital Input header. This has input signals
13 * An 12-pin Power and Digital/Analog Input header. This
15 non-monotonically decreasing numbering.
19 1 D1/TXO RAW -
20 0 D0/RXI GND -
21 - GND RST -
22 - GND VCC -
25 4 D4/A6 D19/A1 19
[all …]
/Zephyr-latest/boards/seeed/xiao_esp32c3/
Dseeed_xiao_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "seeed,xiao-gpio";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpio0 2 0>, /* D0 */
17 <4 0 &gpio0 6 0>, /* D4 */
/Zephyr-latest/boards/seeed/xiao_esp32c6/
Dseeed_xiao_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "seeed,xiao-gpio";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpio0 0 0>, /* D0 */
17 <4 0 &gpio0 22 0>, /* D4 */
/Zephyr-latest/boards/seeed/xiao_rp2040/
Dseeed_xiao_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "seeed,xiao-gpio";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map
14 = <0 0 &gpio0 26 0> /* D0 */
18 , <4 0 &gpio0 6 0> /* D4 */
/Zephyr-latest/boards/adafruit/qt_py_esp32s3/
Dseeed_xiao_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "seeed,xiao-gpio";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpio0 18 0>, /* D0 */
17 <4 0 &gpio0 7 0>, /* D4 */
/Zephyr-latest/boards/adafruit/qt_py_rp2040/
Dseeed_xiao_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "seeed,xiao-gpio";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpio0 29 0>, /* D0 */
17 <4 0 &gpio0 24 0>, /* D4 */
/Zephyr-latest/dts/arm/acsip/
Ds76s.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 #include <st/l0/stm32l073r(b-z)tx-pinctrl.dtsi>
13 pinctrl-0 = <&spi2_sck_pb13 &spi2_miso_pb14 &spi2_mosi_pb15>;
14 pinctrl-names = "default";
15 cs-gpios = <&gpiob 12 GPIO_ACTIVE_LOW>;
22 reset-gpios = <&gpiob 10 GPIO_ACTIVE_LOW>;
23 dio-gpios =
24 /* SX1276 D0 */
32 /* SX1276 D4 */
36 spi-max-frequency = <1000000>;
[all …]
/Zephyr-latest/boards/seeed/seeeduino_xiao/
Dseeed_xiao_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "seeed,xiao-gpio";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map
14 = <0 0 &porta 2 0> /* D0 */
18 , <4 0 &porta 8 0> /* D4 */
/Zephyr-latest/boards/seeed/xiao_ble/
Dseeed_xiao_connector.dtsi5 * SPDX-License-Identifier: Apache-2.0
10 compatible = "seeed,xiao-gpio";
11 #gpio-cells = <2>;
12 gpio-map-mask = <0xffffffff 0xffffffc0>;
13 gpio-map-pass-thru = <0 0x3f>;
14 gpio-map
15 = <0 0 &gpio0 2 0> /* D0 */
19 , <4 0 &gpio0 4 0> /* D4 */
/Zephyr-latest/boards/seeed/xiao_esp32s3/
Dseeed_xiao_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "seeed,xiao-gpio";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpio0 1 0>, /* D0 */
17 <4 0 &gpio0 5 0>, /* D4 */
/Zephyr-latest/boards/sparkfun/pro_micro_rp2040/
Dsparkfun_pro_micro_connector.dtsi4 * SPDX-License-Identifier: MIT
9 compatible = "sparkfun,pro-micro";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map
15 , <0 0 &gpio0 1 0> /* D0 */
18 , <4 0 &gpio0 4 0> /* D4/A6 */
/Zephyr-latest/boards/adafruit/kb2040/
Dsparkfun_pro_micro_connector.dtsi4 * SPDX-License-Identifier: MIT
9 compatible = "sparkfun,pro-micro";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map
15 , <0 0 &gpio0 1 0> /* D0 */
18 , <4 0 &gpio0 4 0> /* D4/A6 */
/Zephyr-latest/include/zephyr/dt-bindings/mipi_dbi/
Dmipi_dbi.h4 * SPDX-License-Identifier: Apache-2.0
11 * @brief MIPI-DBI driver APIs
12 * @defgroup mipi_dbi_interface MIPI-DBI driver APIs
23 * .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-
24 * SCK -' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-'
26 * -.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.-
27 * DOUT |D/C| D7| D6| D5| D4| D3| D2| D1| D0|D/C| D7| D6| D5| D4|...|
28 * -'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'-
31 * -. .-
32 * CS '-----------------------------------------------------------'
[all …]
/Zephyr-latest/boards/st/nucleo_l031k6/
Darduino_nano_r3_connector.dtsi3 * SPDX-License-Identifier: Apache-2.0
8 compatible = "arduino-nano-header-r3";
9 #gpio-cells = <2>;
10 gpio-map-mask = <0xffffffff 0xffffffc0>;
11 gpio-map-pass-thru = <0 0x3f>;
12 gpio-map = <0 0 &gpioa 10 0>, /* D0 */
16 <4 0 &gpiob 7 0>, /* D4 */
/Zephyr-latest/boards/st/nucleo_f410rb/
Darduino_r3_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 0 0>, /* A0 */
19 <6 0 &gpioa 3 0>, /* D0 */
23 <10 0 &gpiob 5 0>, /* D4 */
/Zephyr-latest/boards/st/nucleo_c031c6/
Darduino_r3_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 0 0>, /* A0 */
19 <6 0 &gpiob 7 0>, /* D0 */
23 <10 0 &gpiob 10 0>, /* D4 */
/Zephyr-latest/boards/st/nucleo_f030r8/
Darduino_r3_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 0 0>, /* A0 */
19 <6 0 &gpioa 3 0>, /* D0 */
23 <10 0 &gpiob 5 0>, /* D4 */
/Zephyr-latest/boards/st/nucleo_f091rc/
Darduino_r3_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 0 0>, /* A0 */
19 <6 0 &gpioa 3 0>, /* D0 */
23 <10 0 &gpiob 5 0>, /* D4 */
/Zephyr-latest/boards/st/nucleo_f103rb/
Darduino_r3_connector.dtsi4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 0 0>, /* A0 */
19 <6 0 &gpioa 3 0>, /* D0 */
23 <10 0 &gpiob 5 0>, /* D4 */

123456789