| /Zephyr-latest/dts/bindings/sensor/ |
| D | ti,ina237.yaml | 24 e.g shunt voltage and bus voltage ADC conversion
26 delay for initial ADC conversion, shunt full scale range
36 Value of the ADC configuration register (ADC conversion times,
48 ADC channel conversion configuration.
69 vbus-conversion-time-us:
72 Vbus conversion time in microseconds.
77 vshunt-conversion-time-us:
80 Vshunt conversion time in microseconds.
85 temp-conversion-time-us:
88 Temperature conversion time in microseconds.
|
| D | ti,ina230.yaml | 25 e.g shunt voltage and bus voltage ADC conversion
35 ADC channel conversion configuration.
48 vbus-conversion-time-us:
51 Vbus conversion time in microseconds.
56 vshunt-conversion-time-us:
59 Vshunt conversion time in microseconds.
|
| D | ti,tmp1075.yaml | 13 conversion-rate:
14 description: Conversion rate in us.
26 one-shot-conversion:
27 description: One-shot conversion mode.
|
| D | ti,fdc2x1x.yaml | 35 false = Continuous conversion on the single channel selected by
55 The FDC will perform a single conversion on each channel
58 The sensor performs conversion on Channel 0 to 1 by default after
76 The sensor performs continuous conversion on Channel 0 by default after
185 Channel X Reference Count Conversion Interval Time.
192 Channel X Conversion Offset (FDC2112 and FDC2212 only).
200 Channel X Conversion Settling.
203 stabilize before initiation of a conversion on Channel X.
213 Use this to scale the maximum conversion frequency.
223 conversion time of Channel X sensor clock.
|
| D | ti,ina226.yaml | 23 vbus-conversion-time-us:
26 Vbus conversion time in microseconds.
31 vshunt-conversion-time-us:
34 Vshunt conversion time in microseconds.
|
| D | maxim,max31875.yaml | 39 Each 1-bit increase doubles the conversion time.
40 Similarly, each 1-bit decrease halves the conversion time.
46 enum: # Conversion time (ms)
|
| D | ti,tmp112.yaml | 13 conversion-rate:
14 description: Conversion rate in mHz (milli-Hertz)
|
| D | ti,ina219.yaml | 76 cuts down on conversion times.
79 to overall conversion time.
112 cuts down on conversion times.
115 to overall conversion time.
|
| /Zephyr-latest/include/zephyr/shell/ |
| D | shell_string_conv.h | 17 /** @brief String to long conversion with error check.
24 * @param base Conversion base.
34 /** @brief String to unsigned long conversion with error check.
41 * @param base Conversion base.
51 /** @brief String to unsigned long long conversion with error check.
58 * @param base Conversion base.
68 /** @brief String to boolean conversion with error check.
75 * @param base Conversion base.
|
| /Zephyr-latest/dts/bindings/adc/ |
| D | nxp,s32-adc-sar.yaml | 33 description: Use high speed during conversion, calibration.
37 default: "normal-end-conversion"
39 - "normal-end-conversion"
42 Select normal end conversion callback to reduce interrupt handling time.
|
| D | lltc,ltc2451.yaml | 11 conversion-speed:
18 Set conversion speed in Hz
|
| D | ti,ads114s08.yaml | 24 GPIO for data ready, becomes active when a conversion result is ready
29 GPIO for start/sync, used to signal the ADC that a conversion should be started
|
| /Zephyr-latest/include/zephyr/dt-bindings/sensor/ |
| D | ina237.h | 29 /* Conversion time for bus, shunt and temp in micro-seconds */
53 /* Delay for initial ADC conversion in steps of 2 ms */
66 * @param convdly Delay for initial ADC conversion in steps of 2 ms.
79 * @param vshct Conversion time for shunt voltage.
80 * @param vbusct Conversion time for bus voltage.
81 * @param vtct Conversion time for temperature.
|
| D | ina230.h | 34 /* Conversion time for bus and shunt in micro-seconds */
58 * @param svct Conversion time for shunt voltage.
59 * @param bvct Conversion time for bus voltage.
|
| /Zephyr-latest/dts/bindings/test/ |
| D | vnd,adc-temp-sensor.yaml | 13 description: ADC conversion channels
17 description: conversion channel names
|
| /Zephyr-latest/drivers/sensor/honeywell/mpr/ |
| D | mpr_configuration.h | 61 /* psi to kPa conversion factor: 6.894757 * 10^6 */
65 /* kPa to kPa conversion factor: 1 * 10^6 */
69 /* bar to kPa conversion factor: 100 * 10^6 */
73 /* mbar to kPa conversion factor: 0.1 * 10^6 */
|
| /Zephyr-latest/drivers/sensor/ti/tmp112/ |
| D | Kconfig | 28 bool "Allow to set conversion rate at runtime"
31 When set conversion rate can be set at runtime using sensor_attr_set
|
| /Zephyr-latest/lib/os/ |
| D | cbprintf_complete.c | 68 /* Categories of conversion specifiers. */
183 /* Structure capturing all attributes of a conversion
187 * the conversion.
189 struct conversion { struct
234 /** Indicates an a or A conversion specifier. argument
240 /** Conversion specifier category (value from specifier_cat_enum) */
250 * the decimal point in a floating point conversion. argument
259 /** Conversion specifier character */
265 * Valid until conversion begins. argument
287 * Valid after conversion begins.
[all …]
|
| /Zephyr-latest/boards/nordic/nrf5340_audio_dk/ |
| D | nrf5340_audio_dk_nrf5340_cpuapp_common.dtsi | 162 vbus-conversion-time-us = <4156>;
163 vshunt-conversion-time-us = <4156>;
173 vbus-conversion-time-us = <4156>;
174 vshunt-conversion-time-us = <4156>;
184 vbus-conversion-time-us = <4156>;
185 vshunt-conversion-time-us = <4156>;
195 vbus-conversion-time-us = <4156>;
196 vshunt-conversion-time-us = <4156>;
|
| /Zephyr-latest/dts/bindings/dac/ |
| D | nxp,gau-dac.yaml | 32 nxp,conversion-rate:
41 DAC conversion rate.
|
| /Zephyr-latest/include/zephyr/drivers/sensor/ |
| D | tsl2540.h | 31 /* Turn on continuous conversion */
33 /* Turn on continuous conversion without wait */
|
| /Zephyr-latest/subsys/bluetooth/controller/ |
| D | Kconfig.df | 273 prompt "IQ samples 12 bit to 8 bit conversion approach"
278 bool "Conversion of IQ samples to 8 bits wide by 4 bits shift"
283 sections 7.7.65.21 and 7.7.65.22. This config enables conversion of 12 bit IQ samples to
288 bool "Conversion of IQ samples to 8 bits wide by 2 bits shift"
293 sections 7.7.65.21 and 7.7.65.22. This config enables conversion of 12 bit IQ samples to
295 is a loss in accuracy. This conversion may be used only if you are sure samples will not
299 bool "Conversion of IQ samples to 8 bits wide by use of 8 LSB"
304 sections 7.7.65.21 and 7.7.65.22. This config enables conversion of 12 bit IQ samples to
305 8 bits by use of 8 least significant bits. This conversion may be used only if you are
|
| /Zephyr-latest/drivers/adc/ |
| D | adc_npcx.c | 34 /* ADC conversion mode */
199 /* Is end of conversion cycle event? ie. Scan conversion is done. */ in adc_npcx_isr()
202 /* Stop conversion for scan conversion mode */ in adc_npcx_isr()
220 /* Disable End of cyclic conversion interruption */ in adc_npcx_isr()
227 /* Start conversion */ in adc_npcx_isr()
308 /* Stop conversion for scan conversion mode */ in adc_npcx_start_scan()
311 /* Clear end of cyclic conversion event status flag */ in adc_npcx_start_scan()
317 /* Select 'Scan' Conversion mode. */ in adc_npcx_start_scan()
321 /* Enable end of cyclic conversion event interrupt */ in adc_npcx_start_scan()
324 /* Start conversion */ in adc_npcx_start_scan()
[all …]
|
| /Zephyr-latest/tests/subsys/dsp/utils/src/ |
| D | f32.c | 37 "Conversion failed: %f shifted by %d = %d (expected %d)", (double)data, shift, in test_shift_f32_to_q7()
47 "Conversion failed: %f shifted by %d = %d (expected %d)", (double)data, shift, in test_shift_f32_to_q15()
57 "Conversion failed: %f shifted by %d = %d (expected %d)", (double)data, shift, in test_shift_f32_to_q31()
|
| D | f64.c | 36 "Conversion failed: %f shifted by %d = %d (expected %d)", data, shift, in test_shift_f64_to_q7()
46 "Conversion failed: %f shifted by %d = %d (expected %d)", (double)data, shift, in test_shift_f64_to_q15()
56 "Conversion failed: %f shifted by %d = %d (expected %d)", (double)data, shift, in test_shift_f64_to_q31()
|
