Searched full:bootloaders (Results 1 – 17 of 17) sorted by relevance
13 * :zephyr_file:`subsys/dfu/boot/`: Interface code to bootloaders49 Bootloaders section in Device Firmware Upgrade
111 …wget https://raw.githubusercontent.com/arduino/ArduinoCore-renesas/main/bootloaders/UNO_R4/dfu_min…116 …wget https://raw.githubusercontent.com/arduino/ArduinoCore-renesas/main/bootloaders/UNO_R4/dfu_wif…
73 # enough time to A57 bootloaders to set-up dram
5 '''UF2 runner (flash only) for UF2 compatible bootloaders.'''
8 * Bootloaders
66 * it, not through the reset vector mechanism. Such bootloaders might want to
58 * when using bootloaders in osc8m_init()
168 * enabled by bootloaders, for example. in rv32m1_intmux_init()
85 # for consumption by bootloaders such as MCUboot.
151 other systems such as bootloaders (for MCUboot, this would include the image swap775 UF2 bootloaders only accept UF2 files with a matching family ID.
485 Bootloaders:
17 can be used when building applications which target supported bootloaders (e.g. MCUboot) allowing39 is used for, e.g. bootloaders might only support some of these fields or might place limits on the
314 This case is valid for ROM bootloaders that define image start at 0 and
281 ``16``). Bootloaders that use a part of the SRAM should set this value to an
831 some Arduino IDE bootloaders.847 bootloaders. The ``.bin`` file is still used as a fallback if a HEX File
81 For bootloaders that reside on flash, the devicetree partition layout is
567 by a bootloader. Application images chain-loadable by bootloaders (or other applications)
