| /Zephyr-latest/samples/modules/cmsis_dsp/moving_average/ |
| D | sample.yaml | 7 - samples
9 - qemu_cortex_m0
10 - native_sim
12 - cmsis-dsp
17 - "Input\\[00\\]: 0 0 0 0 0 0 0 0 0 0 | Output\\[00\\]: 0.00"
18 - "Input\\[01\\]: 0 0 0 0 0 0 0 0 0 1 | Output\\[01\\]: 0.10"
19 - "Input\\[02\\]: 0 0 0 0 0 0 0 0 1 2 | Output\\[02\\]: 0.30"
20 - "Input\\[03\\]: 0 0 0 0 0 0 0 1 2 3 | Output\\[03\\]: 0.60"
21 - "Input\\[04\\]: 0 0 0 0 0 0 1 2 3 4 | Output\\[04\\]: 1.00"
22 - "Input\\[05\\]: 0 0 0 0 0 1 2 3 4 5 | Output\\[05\\]: 1.50"
[all …]
|
| /Zephyr-latest/samples/net/gptp/ |
| D | README.rst | 1 .. zephyr:code-sample:: gptp
3 :relevant-api: gptp ptp_time
5 Enable gPTP support and monitor functionality using net-shell.
12 queues) and setup VLANs (if enabled). The net-shell is also enabled so that
29 embedded device like NXP FRDM-K64F, Nucleo-H743-ZI, Nucleo-H745ZI-Q,
30 Nucleo-F767ZI or Atmel SAM-E70 Xplained. Note that gPTP is only supported for
36 .. zephyr-app-commands::
37 :zephyr-app: samples/net/gptp
42 The net-shell command "**net gptp**" will print out general gPTP information.
52 :zephyr_file:`samples/net/vlan/vlan-setup-linux.sh` provides a script that can be
[all …]
|
| /Zephyr-latest/drivers/ipm/ |
| D | ipm_nrfx_ipc.h | 4 * SPDX-License-Identifier: Apache-2.0
13 * Message channels are one-way connections between cores.
19 * SIGNAL0 -> CHANNEL0 -> EVENT0
24 * EVENT1 <- CHANNEL1 <- SIGNAL1
45 IPC_EVENT_BIT(13) | \
46 IPC_EVENT_BIT(14) | \
65 [13] = BIT(13),
66 [14] = BIT(14),
83 [13] = BIT(13),
84 [14] = BIT(14),
|
| /Zephyr-latest/boards/rakwireless/rak5010/ |
| D | rak5010_nrf52840-pinctrl.dtsi | 3 * SPDX-License-Identifier: Apache-2.0
22 low-power-enable;
37 low-power-enable;
43 psels = <NRF_PSEL(TWIM_SDA, 0, 14)>,
44 <NRF_PSEL(TWIM_SCL, 0, 13)>;
50 psels = <NRF_PSEL(TWIM_SDA, 0, 14)>,
51 <NRF_PSEL(TWIM_SCL, 0, 13)>;
52 low-power-enable;
60 <NRF_PSEL(QSPI_IO1, 1, 14)>,
61 <NRF_PSEL(QSPI_IO2, 1, 13)>,
[all …]
|
| /Zephyr-latest/boards/nordic/nrf7002dk/ |
| D | nrf7002dk_nrf5340_cpuapp_pinctrl.dtsi | 5 <NRF_PSEL(SPIM_MISO, 1, 14)>,
6 <NRF_PSEL(SPIM_MOSI, 1, 13)>;
13 <NRF_PSEL(SPIM_MISO, 1, 14)>,
14 <NRF_PSEL(SPIM_MOSI, 1, 13)>;
15 low-power-enable;
|
| /Zephyr-latest/boards/st/stm32mp157c_dk2/ |
| D | arduino_r3_connector.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpiof 14 0>, /* A0 */
14 <1 0 &gpiof 13 0>, /* A1 */
22 <9 0 &gpiod 14 0>, /* D3 */
26 <13 0 &gpiod 1 0>, /* D7 */
27 <14 0 &gpiog 3 0>, /* D8 */
[all …]
|
| /Zephyr-latest/dts/bindings/clock/ |
| D | st,stm32u5-msi-clock.yaml | 2 # SPDX-License-Identifier: Apache-2.0
6 compatible: "st,stm32u5-msi-clock"
9 - name: st,stm32-msi-clock.yaml
10 property-blocklist:
11 - msi-range
15 msi-range:
22 - 0 # range 0 around 48 MHz
23 - 1 # range 1 around 24 MHz
24 - 2 # range 2 around 16 MHz
25 - 3 # range 3 around 12 MHz
[all …]
|
| /Zephyr-latest/dts/bindings/display/ |
| D | led-strip-matrix.yaml | 2 # SPDX-License-Identifier: Apache-2.0
7 compatible: "led-strip-matrix"
9 include: display-controller.yaml
24 [12][13][14][15]
30 [15][14][13][12]
32 start-from-right:
41 [12][13][14][15]
47 [15][14][13][12]
49 start-from-bottom:
55 [12][13][14][15]
[all …]
|
| /Zephyr-latest/soc/intel/apollo_lake/ |
| D | soc_gpio.h | 2 * Copyright (c) 2018-2019, Intel Corporation
4 * SPDX-License-Identifier: Apache-2.0
36 #define APL_GPIO_13 13
37 #define APL_GPIO_14 14
70 #define APL_GPIO_45 13
71 #define APL_GPIO_46 14
104 #define APL_GPIO_SVOD0_CLK 13
120 #define APL_GPIO_200 13
121 #define APL_GPIO_201 14
154 #define APL_GPIO_85 13
[all …]
|
| /Zephyr-latest/boards/st/nucleo_f207zg/ |
| D | arduino_r3_connector.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 3 0>, /* A0 */
20 <7 0 &gpiog 14 0>, /* D1 */
22 <9 0 &gpioe 13 0>, /* D3 */
23 <10 0 &gpiof 14 0>, /* D4 */
26 <13 0 &gpiof 13 0>, /* D7 */
[all …]
|
| /Zephyr-latest/boards/st/nucleo_f412zg/ |
| D | arduino_r3_connector.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 3 0>, /* A0 */
20 <7 0 &gpiog 14 0>, /* D1 */
22 <9 0 &gpioe 13 0>, /* D3 */
23 <10 0 &gpiof 14 0>, /* D4 */
26 <13 0 &gpiof 13 0>, /* D7 */
[all …]
|
| /Zephyr-latest/boards/st/nucleo_f413zh/ |
| D | arduino_r3_connector.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 3 0>, /* A0 */
20 <7 0 &gpiog 14 0>, /* D1 */
22 <9 0 &gpioe 13 0>, /* D3 */
23 <10 0 &gpiof 14 0>, /* D4 */
26 <13 0 &gpiof 13 0>, /* D7 */
[all …]
|
| /Zephyr-latest/boards/st/nucleo_f429zi/ |
| D | arduino_r3_connector.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 3 0>, /* A0 */
20 <7 0 &gpiog 14 0>, /* D1 */
22 <9 0 &gpioe 13 0>, /* D3 */
23 <10 0 &gpiof 14 0>, /* D4 */
26 <13 0 &gpiof 13 0>, /* D7 */
[all …]
|
| /Zephyr-latest/boards/st/nucleo_f446ze/ |
| D | arduino_r3_connector.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 3 0>, /* A0 */
20 <7 0 &gpiog 14 0>, /* D1 */
22 <9 0 &gpioe 13 0>, /* D3 */
23 <10 0 &gpiof 14 0>, /* D4 */
26 <13 0 &gpiof 13 0>, /* D7 */
[all …]
|
| /Zephyr-latest/boards/st/nucleo_f722ze/ |
| D | arduino_r3_connector.dtsi | 5 * SPDX-License-Identifier: Apache-2.0
10 compatible = "arduino-header-r3";
11 #gpio-cells = <2>;
12 gpio-map-mask = <0xffffffff 0xffffffc0>;
13 gpio-map-pass-thru = <0 0x3f>;
14 gpio-map = <0 0 &gpioa 3 0>, /* A0 */
21 <7 0 &gpiog 14 0>, /* D1 */
23 <9 0 &gpioe 13 0>, /* D3 */
24 <10 0 &gpiof 14 0>, /* D4 */
27 <13 0 &gpiof 13 0>, /* D7 */
[all …]
|
| /Zephyr-latest/boards/st/nucleo_f746zg/ |
| D | arduino_r3_connector.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 3 0>, /* A0 */
20 <7 0 &gpiog 14 0>, /* D1 */
22 <9 0 &gpioe 13 0>, /* D3 */
23 <10 0 &gpiof 14 0>, /* D4 */
26 <13 0 &gpiof 13 0>, /* D7 */
[all …]
|
| /Zephyr-latest/boards/st/nucleo_f756zg/ |
| D | arduino_r3_connector.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 3 0>, /* A0 */
20 <7 0 &gpiog 14 0>, /* D1 */
22 <9 0 &gpioe 13 0>, /* D3 */
23 <10 0 &gpiof 14 0>, /* D4 */
26 <13 0 &gpiof 13 0>, /* D7 */
[all …]
|
| /Zephyr-latest/boards/st/nucleo_f767zi/ |
| D | arduino_r3_connector.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "arduino-header-r3";
10 #gpio-cells = <2>;
11 gpio-map-mask = <0xffffffff 0xffffffc0>;
12 gpio-map-pass-thru = <0 0x3f>;
13 gpio-map = <0 0 &gpioa 3 0>, /* A0 */
20 <7 0 &gpiog 14 0>, /* D1 */
22 <9 0 &gpioe 13 0>, /* D3 */
23 <10 0 &gpiof 14 0>, /* D4 */
26 <13 0 &gpiof 13 0>, /* D7 */
[all …]
|
| /Zephyr-latest/samples/tfm_integration/tfm_secure_partition/dummy_partition/ |
| D | dummy_partition.c | 4 * SPDX-License-Identifier: Apache-2.0
21 { {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15} },
22 { {1, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15} },
23 { {2, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15} },
24 { {3, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15} },
25 { {4, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15} },
77 if (msg->in_size[0] != sizeof(secret_index)) { in tfm_dp_secret_digest_ipc()
82 num = psa_read(msg->handle, 0, &secret_index, msg->in_size[0]); in tfm_dp_secret_digest_ipc()
83 if (num != msg->in_size[0]) { in tfm_dp_secret_digest_ipc()
87 return tfm_dp_secret_digest(secret_index, msg->out_size[0], in tfm_dp_secret_digest_ipc()
[all …]
|
| /Zephyr-latest/include/zephyr/dt-bindings/pinctrl/renesas/ |
| D | pinctrl-r8a77961.h | 3 * Copyright (c) 2023-2024 EPAM Systems
5 * SPDX-License-Identifier: Apache-2.0
10 #include "pinctrl-rcar-common.h"
13 #define PIN_NONE -1
27 #define PIN_D13 RCAR_GP_PIN(0, 13)
28 #define PIN_D14 RCAR_GP_PIN(0, 14)
43 #define PIN_A13 RCAR_GP_PIN(1, 13)
44 #define PIN_A14 RCAR_GP_PIN(1, 14)
72 #define PIN_AVB_AVTP_MATCH_A RCAR_GP_PIN(2, 13)
73 #define PIN_AVB_AVTP_CAPTURE_A RCAR_GP_PIN(2, 14)
[all …]
|
| D | pinctrl-r8a77951.h | 4 * SPDX-License-Identifier: Apache-2.0
9 #include "pinctrl-rcar-common.h"
12 #define PIN_NONE -1
26 #define PIN_D13 RCAR_GP_PIN(0, 13)
27 #define PIN_D14 RCAR_GP_PIN(0, 14)
42 #define PIN_A13 RCAR_GP_PIN(1, 13)
43 #define PIN_A14 RCAR_GP_PIN(1, 14)
71 #define PIN_AVB_AVTP_MATCH_A RCAR_GP_PIN(2, 13)
72 #define PIN_AVB_AVTP_CAPTURE_A RCAR_GP_PIN(2, 14)
86 #define PIN_SD0_WP RCAR_GP_PIN(3, 13)
[all …]
|
| /Zephyr-latest/tests/drivers/gpio/gpio_hogs/boards/ |
| D | mec172xevb_assy6906.overlay | 4 * SPDX-License-Identifier: Apache-2.0
7 #include <zephyr/dt-bindings/gpio/gpio.h>
11 output-high-gpios = <&gpio_000_036 13 GPIO_ACTIVE_LOW>;
12 output-low-gpios = <&gpio_000_036 14 GPIO_ACTIVE_HIGH>;
13 input-gpios = <&gpio_000_036 11 GPIO_ACTIVE_LOW>;
19 gpio-hog;
20 gpios = <13 GPIO_ACTIVE_LOW>;
21 output-high;
25 gpio-hog;
26 gpios = <14 GPIO_ACTIVE_HIGH>;
[all …]
|
| D | nrf52840dk_nrf52840.overlay | 4 * SPDX-License-Identifier: Apache-2.0
7 #include <zephyr/dt-bindings/gpio/gpio.h>
11 output-high-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
12 output-low-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
13 input-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
19 gpio-hog;
20 gpios = <13 GPIO_ACTIVE_LOW>;
21 output-high;
25 gpio-hog;
26 gpios = <14 GPIO_ACTIVE_HIGH>;
[all …]
|
| D | nrf52_bsim.overlay | 4 * SPDX-License-Identifier: Apache-2.0
7 #include <zephyr/dt-bindings/gpio/gpio.h>
11 output-high-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
12 output-low-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
13 input-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
19 gpio-hog;
20 gpios = <13 GPIO_ACTIVE_LOW>;
21 output-high;
25 gpio-hog;
26 gpios = <14 GPIO_ACTIVE_HIGH>;
[all …]
|
| /Zephyr-latest/tests/bluetooth/qualification/ |
| D | ICS_Zephyr_Bluetooth_Host.bqw | 1 <?xml version="1.0" encoding="utf-8"?>
2 <Qualification xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2…
5 …<Product Name="Zephyr Host" Description="host" Model="main" Website="" PublishDate="2024-11-26T00:…
15 <Feature>GAP 14a/1</Feature>
16 <Feature>GAP 14a/13</Feature>
20 <Feature>GAP 25/13b</Feature>
22 <Feature>GAP 14a/18</Feature>
23 <Feature>GAP 25/13c</Feature>
26 <Feature>GAP 35/13c</Feature>
28 <Feature>GAP 35/13</Feature>
[all …]
|
