1 /* 2 * Copyright (c) 2021, STMicroelectronics - All Rights Reserved 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 */ 6 #ifndef REGULATOR_H 7 #define REGULATOR_H 8 9 #include <platform_def.h> 10 11 #ifndef PLAT_NB_RDEVS 12 #error "Missing PLAT_NB_RDEVS" 13 #endif 14 15 /* 16 * Consumer interface 17 */ 18 19 /* regulator-always-on : regulator should never be disabled */ 20 #define REGUL_ALWAYS_ON BIT(0) 21 /* 22 * regulator-boot-on: 23 * It's expected that this regulator was left on by the bootloader. 24 * The core shouldn't prevent it from being turned off later. 25 * The regulator is needed to exit from suspend so it is turned on during suspend entry. 26 */ 27 #define REGUL_BOOT_ON BIT(1) 28 /* regulator-over-current-protection: Enable over current protection. */ 29 #define REGUL_OCP BIT(2) 30 /* regulator-active-discharge: enable active discharge. */ 31 #define REGUL_ACTIVE_DISCHARGE BIT(3) 32 /* regulator-pull-down: Enable pull down resistor when the regulator is disabled. */ 33 #define REGUL_PULL_DOWN BIT(4) 34 /* 35 * st,mask-reset: set mask reset for the regulator, meaning that the regulator 36 * setting is maintained during pmic reset. 37 */ 38 #define REGUL_MASK_RESET BIT(5) 39 /* st,regulator-sink-source: set the regulator in sink source mode */ 40 #define REGUL_SINK_SOURCE BIT(6) 41 /* st,regulator-bypass: set the regulator in bypass mode */ 42 #define REGUL_ENABLE_BYPASS BIT(7) 43 44 struct rdev *regulator_get_by_name(const char *node_name); 45 46 struct rdev *regulator_get_by_supply_name(const void *fdt, int node, const char *name); 47 48 int regulator_enable(struct rdev *rdev); 49 int regulator_disable(struct rdev *rdev); 50 int regulator_is_enabled(const struct rdev *rdev); 51 52 int regulator_set_voltage(struct rdev *rdev, uint16_t volt); 53 int regulator_set_min_voltage(struct rdev *rdev); 54 int regulator_get_voltage(const struct rdev *rdev); 55 56 int regulator_list_voltages(const struct rdev *rdev, const uint16_t **levels, size_t *count); 57 void regulator_get_range(const struct rdev *rdev, uint16_t *min_mv, uint16_t *max_mv); 58 int regulator_set_flag(struct rdev *rdev, uint16_t flag); 59 60 /* 61 * Driver Interface 62 */ 63 64 /* set_state() arguments */ 65 #define STATE_DISABLE false 66 #define STATE_ENABLE true 67 68 struct regul_description { 69 const char *node_name; 70 const struct regul_ops *ops; 71 const void *driver_data; 72 const char *supply_name; 73 const uint32_t enable_ramp_delay; 74 }; 75 76 struct regul_ops { 77 int (*set_state)(const struct regul_description *desc, bool state); 78 int (*get_state)(const struct regul_description *desc); 79 int (*set_voltage)(const struct regul_description *desc, uint16_t mv); 80 int (*get_voltage)(const struct regul_description *desc); 81 int (*list_voltages)(const struct regul_description *desc, 82 const uint16_t **levels, size_t *count); 83 int (*set_flag)(const struct regul_description *desc, uint16_t flag); 84 void (*lock)(const struct regul_description *desc); 85 void (*unlock)(const struct regul_description *desc); 86 }; 87 88 int regulator_register(const struct regul_description *desc, int node); 89 90 /* 91 * Internal regulator structure 92 * The structure is internal to the core, and the content should not be used 93 * by a consumer nor a driver. 94 */ 95 struct rdev { 96 const struct regul_description *desc; 97 98 int32_t phandle; 99 100 uint16_t min_mv; 101 uint16_t max_mv; 102 103 uint16_t flags; 104 105 uint32_t enable_ramp_delay; 106 }; 107 108 #endif /* REGULATOR_H */ 109
