1 /**
2 * \file ssl_internal.h
3 *
4 * \brief Internal functions shared by the SSL modules
5 */
6 /*
7 * Copyright The Mbed TLS Contributors
8 * SPDX-License-Identifier: Apache-2.0
9 *
10 * Licensed under the Apache License, Version 2.0 (the "License"); you may
11 * not use this file except in compliance with the License.
12 * You may obtain a copy of the License at
13 *
14 * http://www.apache.org/licenses/LICENSE-2.0
15 *
16 * Unless required by applicable law or agreed to in writing, software
17 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
18 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
19 * See the License for the specific language governing permissions and
20 * limitations under the License.
21 */
22 #ifndef MBEDTLS_SSL_INTERNAL_H
23 #define MBEDTLS_SSL_INTERNAL_H
24
25 #if !defined(MBEDTLS_CONFIG_FILE)
26 #include "mbedtls/config.h"
27 #else
28 #include MBEDTLS_CONFIG_FILE
29 #endif
30
31 #include "mbedtls/ssl.h"
32 #include "mbedtls/cipher.h"
33
34 #if defined(MBEDTLS_USE_PSA_CRYPTO)
35 #include "psa/crypto.h"
36 #endif
37
38 #if defined(MBEDTLS_MD5_C)
39 #include "mbedtls/md5.h"
40 #endif
41
42 #if defined(MBEDTLS_SHA1_C)
43 #include "mbedtls/sha1.h"
44 #endif
45
46 #if defined(MBEDTLS_SHA256_C)
47 #include "mbedtls/sha256.h"
48 #endif
49
50 #if defined(MBEDTLS_SHA512_C)
51 #include "mbedtls/sha512.h"
52 #endif
53
54 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
55 #include "mbedtls/ecjpake.h"
56 #endif
57
58 #if defined(MBEDTLS_USE_PSA_CRYPTO)
59 #include "psa/crypto.h"
60 #include "mbedtls/psa_util.h"
61 #endif /* MBEDTLS_USE_PSA_CRYPTO */
62
63 #if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
64 !defined(inline) && !defined(__cplusplus)
65 #define inline __inline
66 #endif
67
68 /* Determine minimum supported version */
69 #define MBEDTLS_SSL_MIN_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3
70
71 #if defined(MBEDTLS_SSL_PROTO_SSL3)
72 #define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_0
73 #else
74 #if defined(MBEDTLS_SSL_PROTO_TLS1)
75 #define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1
76 #else
77 #if defined(MBEDTLS_SSL_PROTO_TLS1_1)
78 #define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2
79 #else
80 #if defined(MBEDTLS_SSL_PROTO_TLS1_2)
81 #define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3
82 #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
83 #endif /* MBEDTLS_SSL_PROTO_TLS1_1 */
84 #endif /* MBEDTLS_SSL_PROTO_TLS1 */
85 #endif /* MBEDTLS_SSL_PROTO_SSL3 */
86
87 #define MBEDTLS_SSL_MIN_VALID_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1
88 #define MBEDTLS_SSL_MIN_VALID_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3
89
90 /* Determine maximum supported version */
91 #define MBEDTLS_SSL_MAX_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3
92
93 #if defined(MBEDTLS_SSL_PROTO_TLS1_2)
94 #define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3
95 #else
96 #if defined(MBEDTLS_SSL_PROTO_TLS1_1)
97 #define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2
98 #else
99 #if defined(MBEDTLS_SSL_PROTO_TLS1)
100 #define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1
101 #else
102 #if defined(MBEDTLS_SSL_PROTO_SSL3)
103 #define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_0
104 #endif /* MBEDTLS_SSL_PROTO_SSL3 */
105 #endif /* MBEDTLS_SSL_PROTO_TLS1 */
106 #endif /* MBEDTLS_SSL_PROTO_TLS1_1 */
107 #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
108
109 /* Shorthand for restartable ECC */
110 #if defined(MBEDTLS_ECP_RESTARTABLE) && \
111 defined(MBEDTLS_SSL_CLI_C) && \
112 defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
113 defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED)
114 #define MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED
115 #endif
116
117 #define MBEDTLS_SSL_INITIAL_HANDSHAKE 0
118 #define MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS 1 /* In progress */
119 #define MBEDTLS_SSL_RENEGOTIATION_DONE 2 /* Done or aborted */
120 #define MBEDTLS_SSL_RENEGOTIATION_PENDING 3 /* Requested (server only) */
121
122 /*
123 * DTLS retransmission states, see RFC 6347 4.2.4
124 *
125 * The SENDING state is merged in PREPARING for initial sends,
126 * but is distinct for resends.
127 *
128 * Note: initial state is wrong for server, but is not used anyway.
129 */
130 #define MBEDTLS_SSL_RETRANS_PREPARING 0
131 #define MBEDTLS_SSL_RETRANS_SENDING 1
132 #define MBEDTLS_SSL_RETRANS_WAITING 2
133 #define MBEDTLS_SSL_RETRANS_FINISHED 3
134
135 /*
136 * Allow extra bytes for record, authentication and encryption overhead:
137 * counter (8) + header (5) + IV(16) + MAC (16-48) + padding (0-256)
138 * and allow for a maximum of 1024 of compression expansion if
139 * enabled.
140 */
141 #if defined(MBEDTLS_ZLIB_SUPPORT)
142 #define MBEDTLS_SSL_COMPRESSION_ADD 1024
143 #else
144 #define MBEDTLS_SSL_COMPRESSION_ADD 0
145 #endif
146
147 /* This macro determines whether CBC is supported. */
148 #if defined(MBEDTLS_CIPHER_MODE_CBC) && \
149 ( defined(MBEDTLS_AES_C) || \
150 defined(MBEDTLS_CAMELLIA_C) || \
151 defined(MBEDTLS_ARIA_C) || \
152 defined(MBEDTLS_DES_C) )
153 #define MBEDTLS_SSL_SOME_SUITES_USE_CBC
154 #endif
155
156 /* This macro determines whether the CBC construct used in TLS 1.0-1.2 (as
157 * opposed to the very different CBC construct used in SSLv3) is supported. */
158 #if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) && \
159 ( defined(MBEDTLS_SSL_PROTO_TLS1) || \
160 defined(MBEDTLS_SSL_PROTO_TLS1_1) || \
161 defined(MBEDTLS_SSL_PROTO_TLS1_2) )
162 #define MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC
163 #endif
164
165 #if defined(MBEDTLS_ARC4_C) || defined(MBEDTLS_CIPHER_NULL_CIPHER) || \
166 defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC)
167 #define MBEDTLS_SSL_SOME_MODES_USE_MAC
168 #endif
169
170 #if defined(MBEDTLS_SSL_SOME_MODES_USE_MAC)
171 /* Ciphersuites using HMAC */
172 #if defined(MBEDTLS_SHA512_C)
173 #define MBEDTLS_SSL_MAC_ADD 48 /* SHA-384 used for HMAC */
174 #elif defined(MBEDTLS_SHA256_C)
175 #define MBEDTLS_SSL_MAC_ADD 32 /* SHA-256 used for HMAC */
176 #else
177 #define MBEDTLS_SSL_MAC_ADD 20 /* SHA-1 used for HMAC */
178 #endif
179 #else /* MBEDTLS_SSL_SOME_MODES_USE_MAC */
180 /* AEAD ciphersuites: GCM and CCM use a 128 bits tag */
181 #define MBEDTLS_SSL_MAC_ADD 16
182 #endif
183
184 #if defined(MBEDTLS_CIPHER_MODE_CBC)
185 #define MBEDTLS_SSL_PADDING_ADD 256
186 #else
187 #define MBEDTLS_SSL_PADDING_ADD 0
188 #endif
189
190 #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
191 #define MBEDTLS_SSL_MAX_CID_EXPANSION MBEDTLS_SSL_CID_PADDING_GRANULARITY
192 #else
193 #define MBEDTLS_SSL_MAX_CID_EXPANSION 0
194 #endif
195
196 #define MBEDTLS_SSL_PAYLOAD_OVERHEAD ( MBEDTLS_SSL_COMPRESSION_ADD + \
197 MBEDTLS_MAX_IV_LENGTH + \
198 MBEDTLS_SSL_MAC_ADD + \
199 MBEDTLS_SSL_PADDING_ADD + \
200 MBEDTLS_SSL_MAX_CID_EXPANSION \
201 )
202
203 #define MBEDTLS_SSL_IN_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \
204 ( MBEDTLS_SSL_IN_CONTENT_LEN ) )
205
206 #define MBEDTLS_SSL_OUT_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \
207 ( MBEDTLS_SSL_OUT_CONTENT_LEN ) )
208
209 /* The maximum number of buffered handshake messages. */
210 #define MBEDTLS_SSL_MAX_BUFFERED_HS 4
211
212 /* Maximum length we can advertise as our max content length for
213 RFC 6066 max_fragment_length extension negotiation purposes
214 (the lesser of both sizes, if they are unequal.)
215 */
216 #define MBEDTLS_TLS_EXT_ADV_CONTENT_LEN ( \
217 (MBEDTLS_SSL_IN_CONTENT_LEN > MBEDTLS_SSL_OUT_CONTENT_LEN) \
218 ? ( MBEDTLS_SSL_OUT_CONTENT_LEN ) \
219 : ( MBEDTLS_SSL_IN_CONTENT_LEN ) \
220 )
221
222 /* Maximum size in bytes of list in sig-hash algorithm ext., RFC 5246 */
223 #define MBEDTLS_SSL_MAX_SIG_HASH_ALG_LIST_LEN 65534
224
225 /* Maximum size in bytes of list in supported elliptic curve ext., RFC 4492 */
226 #define MBEDTLS_SSL_MAX_CURVE_LIST_LEN 65535
227
228 /*
229 * Check that we obey the standard's message size bounds
230 */
231
232 #if MBEDTLS_SSL_MAX_CONTENT_LEN > 16384
233 #error "Bad configuration - record content too large."
234 #endif
235
236 #if MBEDTLS_SSL_IN_CONTENT_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN
237 #error "Bad configuration - incoming record content should not be larger than MBEDTLS_SSL_MAX_CONTENT_LEN."
238 #endif
239
240 #if MBEDTLS_SSL_OUT_CONTENT_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN
241 #error "Bad configuration - outgoing record content should not be larger than MBEDTLS_SSL_MAX_CONTENT_LEN."
242 #endif
243
244 #if MBEDTLS_SSL_IN_PAYLOAD_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN + 2048
245 #error "Bad configuration - incoming protected record payload too large."
246 #endif
247
248 #if MBEDTLS_SSL_OUT_PAYLOAD_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN + 2048
249 #error "Bad configuration - outgoing protected record payload too large."
250 #endif
251
252 /* Calculate buffer sizes */
253
254 /* Note: Even though the TLS record header is only 5 bytes
255 long, we're internally using 8 bytes to store the
256 implicit sequence number. */
257 #define MBEDTLS_SSL_HEADER_LEN 13
258
259 #if !defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
260 #define MBEDTLS_SSL_IN_BUFFER_LEN \
261 ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) )
262 #else
263 #define MBEDTLS_SSL_IN_BUFFER_LEN \
264 ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) \
265 + ( MBEDTLS_SSL_CID_IN_LEN_MAX ) )
266 #endif
267
268 #if !defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
269 #define MBEDTLS_SSL_OUT_BUFFER_LEN \
270 ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) )
271 #else
272 #define MBEDTLS_SSL_OUT_BUFFER_LEN \
273 ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) \
274 + ( MBEDTLS_SSL_CID_OUT_LEN_MAX ) )
275 #endif
276
277 #if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
mbedtls_ssl_get_output_buflen(const mbedtls_ssl_context * ctx)278 static inline uint32_t mbedtls_ssl_get_output_buflen( const mbedtls_ssl_context *ctx )
279 {
280 #if defined (MBEDTLS_SSL_DTLS_CONNECTION_ID)
281 return (uint32_t) mbedtls_ssl_get_output_max_frag_len( ctx )
282 + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD
283 + MBEDTLS_SSL_CID_OUT_LEN_MAX;
284 #else
285 return (uint32_t) mbedtls_ssl_get_output_max_frag_len( ctx )
286 + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD;
287 #endif
288 }
289
mbedtls_ssl_get_input_buflen(const mbedtls_ssl_context * ctx)290 static inline uint32_t mbedtls_ssl_get_input_buflen( const mbedtls_ssl_context *ctx )
291 {
292 #if defined (MBEDTLS_SSL_DTLS_CONNECTION_ID)
293 return (uint32_t) mbedtls_ssl_get_input_max_frag_len( ctx )
294 + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD
295 + MBEDTLS_SSL_CID_IN_LEN_MAX;
296 #else
297 return (uint32_t) mbedtls_ssl_get_input_max_frag_len( ctx )
298 + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD;
299 #endif
300 }
301 #endif
302
303 #ifdef MBEDTLS_ZLIB_SUPPORT
304 /* Compression buffer holds both IN and OUT buffers, so should be size of the larger */
305 #define MBEDTLS_SSL_COMPRESS_BUFFER_LEN ( \
306 ( MBEDTLS_SSL_IN_BUFFER_LEN > MBEDTLS_SSL_OUT_BUFFER_LEN ) \
307 ? MBEDTLS_SSL_IN_BUFFER_LEN \
308 : MBEDTLS_SSL_OUT_BUFFER_LEN \
309 )
310 #endif
311
312 /*
313 * TLS extension flags (for extensions with outgoing ServerHello content
314 * that need it (e.g. for RENEGOTIATION_INFO the server already knows because
315 * of state of the renegotiation flag, so no indicator is required)
316 */
317 #define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT (1 << 0)
318 #define MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK (1 << 1)
319
320 /**
321 * \brief This function checks if the remaining size in a buffer is
322 * greater or equal than a needed space.
323 *
324 * \param cur Pointer to the current position in the buffer.
325 * \param end Pointer to one past the end of the buffer.
326 * \param need Needed space in bytes.
327 *
328 * \return Zero if the needed space is available in the buffer, non-zero
329 * otherwise.
330 */
mbedtls_ssl_chk_buf_ptr(const uint8_t * cur,const uint8_t * end,size_t need)331 static inline int mbedtls_ssl_chk_buf_ptr( const uint8_t *cur,
332 const uint8_t *end, size_t need )
333 {
334 return( ( cur > end ) || ( need > (size_t)( end - cur ) ) );
335 }
336
337 /**
338 * \brief This macro checks if the remaining size in a buffer is
339 * greater or equal than a needed space. If it is not the case,
340 * it returns an SSL_BUFFER_TOO_SMALL error.
341 *
342 * \param cur Pointer to the current position in the buffer.
343 * \param end Pointer to one past the end of the buffer.
344 * \param need Needed space in bytes.
345 *
346 */
347 #define MBEDTLS_SSL_CHK_BUF_PTR( cur, end, need ) \
348 do { \
349 if( mbedtls_ssl_chk_buf_ptr( ( cur ), ( end ), ( need ) ) != 0 ) \
350 { \
351 return( MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL ); \
352 } \
353 } while( 0 )
354
355 #ifdef __cplusplus
356 extern "C" {
357 #endif
358
359 #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
360 defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
361 /*
362 * Abstraction for a grid of allowed signature-hash-algorithm pairs.
363 */
364 struct mbedtls_ssl_sig_hash_set_t
365 {
366 /* At the moment, we only need to remember a single suitable
367 * hash algorithm per signature algorithm. As long as that's
368 * the case - and we don't need a general lookup function -
369 * we can implement the sig-hash-set as a map from signatures
370 * to hash algorithms. */
371 mbedtls_md_type_t rsa;
372 mbedtls_md_type_t ecdsa;
373 };
374 #endif /* MBEDTLS_SSL_PROTO_TLS1_2 &&
375 MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
376
377 typedef int mbedtls_ssl_tls_prf_cb( const unsigned char *secret, size_t slen,
378 const char *label,
379 const unsigned char *random, size_t rlen,
380 unsigned char *dstbuf, size_t dlen );
381
382 /* cipher.h exports the maximum IV, key and block length from
383 * all ciphers enabled in the config, regardless of whether those
384 * ciphers are actually usable in SSL/TLS. Notably, XTS is enabled
385 * in the default configuration and uses 64 Byte keys, but it is
386 * not used for record protection in SSL/TLS.
387 *
388 * In order to prevent unnecessary inflation of key structures,
389 * we introduce SSL-specific variants of the max-{key,block,IV}
390 * macros here which are meant to only take those ciphers into
391 * account which can be negotiated in SSL/TLS.
392 *
393 * Since the current definitions of MBEDTLS_MAX_{KEY|BLOCK|IV}_LENGTH
394 * in cipher.h are rough overapproximations of the real maxima, here
395 * we content ourselves with replicating those overapproximations
396 * for the maximum block and IV length, and excluding XTS from the
397 * computation of the maximum key length. */
398 #define MBEDTLS_SSL_MAX_BLOCK_LENGTH 16
399 #define MBEDTLS_SSL_MAX_IV_LENGTH 16
400 #define MBEDTLS_SSL_MAX_KEY_LENGTH 32
401
402 /**
403 * \brief The data structure holding the cryptographic material (key and IV)
404 * used for record protection in TLS 1.3.
405 */
406 struct mbedtls_ssl_key_set
407 {
408 /*! The key for client->server records. */
409 unsigned char client_write_key[ MBEDTLS_SSL_MAX_KEY_LENGTH ];
410 /*! The key for server->client records. */
411 unsigned char server_write_key[ MBEDTLS_SSL_MAX_KEY_LENGTH ];
412 /*! The IV for client->server records. */
413 unsigned char client_write_iv[ MBEDTLS_SSL_MAX_IV_LENGTH ];
414 /*! The IV for server->client records. */
415 unsigned char server_write_iv[ MBEDTLS_SSL_MAX_IV_LENGTH ];
416
417 size_t key_len; /*!< The length of client_write_key and
418 * server_write_key, in Bytes. */
419 size_t iv_len; /*!< The length of client_write_iv and
420 * server_write_iv, in Bytes. */
421 };
422 typedef struct mbedtls_ssl_key_set mbedtls_ssl_key_set;
423
424 /*
425 * This structure contains the parameters only needed during handshake.
426 */
427 struct mbedtls_ssl_handshake_params
428 {
429 /*
430 * Handshake specific crypto variables
431 */
432
433 #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
434 defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
435 mbedtls_ssl_sig_hash_set_t hash_algs; /*!< Set of suitable sig-hash pairs */
436 #endif
437 #if defined(MBEDTLS_DHM_C)
438 mbedtls_dhm_context dhm_ctx; /*!< DHM key exchange */
439 #endif
440 /* Adding guard for MBEDTLS_ECDSA_C to ensure no compile errors due
441 * to guards also being in ssl_srv.c and ssl_cli.c. There is a gap
442 * in functionality that access to ecdh_ctx structure is needed for
443 * MBEDTLS_ECDSA_C which does not seem correct.
444 */
445 #if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
446 mbedtls_ecdh_context ecdh_ctx; /*!< ECDH key exchange */
447
448 #if defined(MBEDTLS_USE_PSA_CRYPTO)
449 psa_key_type_t ecdh_psa_type;
450 uint16_t ecdh_bits;
451 psa_key_id_t ecdh_psa_privkey;
452 unsigned char ecdh_psa_peerkey[MBEDTLS_PSA_MAX_EC_PUBKEY_LENGTH];
453 size_t ecdh_psa_peerkey_len;
454 #endif /* MBEDTLS_USE_PSA_CRYPTO */
455 #endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
456
457 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
458 mbedtls_ecjpake_context ecjpake_ctx; /*!< EC J-PAKE key exchange */
459 #if defined(MBEDTLS_SSL_CLI_C)
460 unsigned char *ecjpake_cache; /*!< Cache for ClientHello ext */
461 size_t ecjpake_cache_len; /*!< Length of cached data */
462 #endif
463 #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
464 #if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
465 defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
466 const mbedtls_ecp_curve_info **curves; /*!< Supported elliptic curves */
467 #endif
468 #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
469 #if defined(MBEDTLS_USE_PSA_CRYPTO)
470 psa_key_id_t psk_opaque; /*!< Opaque PSK from the callback */
471 #endif /* MBEDTLS_USE_PSA_CRYPTO */
472 unsigned char *psk; /*!< PSK from the callback */
473 size_t psk_len; /*!< Length of PSK from callback */
474 #endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
475 #if defined(MBEDTLS_X509_CRT_PARSE_C)
476 mbedtls_ssl_key_cert *key_cert; /*!< chosen key/cert pair (server) */
477 #if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
478 int sni_authmode; /*!< authmode from SNI callback */
479 mbedtls_ssl_key_cert *sni_key_cert; /*!< key/cert list from SNI */
480 mbedtls_x509_crt *sni_ca_chain; /*!< trusted CAs from SNI callback */
481 mbedtls_x509_crl *sni_ca_crl; /*!< trusted CAs CRLs from SNI */
482 #endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */
483 #endif /* MBEDTLS_X509_CRT_PARSE_C */
484 #if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED)
485 int ecrs_enabled; /*!< Handshake supports EC restart? */
486 mbedtls_x509_crt_restart_ctx ecrs_ctx; /*!< restart context */
487 enum { /* this complements ssl->state with info on intra-state operations */
488 ssl_ecrs_none = 0, /*!< nothing going on (yet) */
489 ssl_ecrs_crt_verify, /*!< Certificate: crt_verify() */
490 ssl_ecrs_ske_start_processing, /*!< ServerKeyExchange: pk_verify() */
491 ssl_ecrs_cke_ecdh_calc_secret, /*!< ClientKeyExchange: ECDH step 2 */
492 ssl_ecrs_crt_vrfy_sign, /*!< CertificateVerify: pk_sign() */
493 } ecrs_state; /*!< current (or last) operation */
494 mbedtls_x509_crt *ecrs_peer_cert; /*!< The peer's CRT chain. */
495 size_t ecrs_n; /*!< place for saving a length */
496 #endif
497 #if defined(MBEDTLS_X509_CRT_PARSE_C) && \
498 !defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
499 mbedtls_pk_context peer_pubkey; /*!< The public key from the peer. */
500 #endif /* MBEDTLS_X509_CRT_PARSE_C && !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
501 #if defined(MBEDTLS_SSL_PROTO_DTLS)
502 unsigned int out_msg_seq; /*!< Outgoing handshake sequence number */
503 unsigned int in_msg_seq; /*!< Incoming handshake sequence number */
504
505 unsigned char *verify_cookie; /*!< Cli: HelloVerifyRequest cookie
506 Srv: unused */
507 unsigned char verify_cookie_len; /*!< Cli: cookie length
508 Srv: flag for sending a cookie */
509
510 uint32_t retransmit_timeout; /*!< Current value of timeout */
511 unsigned char retransmit_state; /*!< Retransmission state */
512 mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */
513 mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */
514 unsigned char *cur_msg_p; /*!< Position in current message */
515 unsigned int in_flight_start_seq; /*!< Minimum message sequence in the
516 flight being received */
517 mbedtls_ssl_transform *alt_transform_out; /*!< Alternative transform for
518 resending messages */
519 unsigned char alt_out_ctr[8]; /*!< Alternative record epoch/counter
520 for resending messages */
521
522 #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
523 /* The state of CID configuration in this handshake. */
524
525 uint8_t cid_in_use; /*!< This indicates whether the use of the CID extension
526 * has been negotiated. Possible values are
527 * #MBEDTLS_SSL_CID_ENABLED and
528 * #MBEDTLS_SSL_CID_DISABLED. */
529 unsigned char peer_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ]; /*! The peer's CID */
530 uint8_t peer_cid_len; /*!< The length of
531 * \c peer_cid. */
532 #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
533
534 struct
535 {
536 size_t total_bytes_buffered; /*!< Cumulative size of heap allocated
537 * buffers used for message buffering. */
538
539 uint8_t seen_ccs; /*!< Indicates if a CCS message has
540 * been seen in the current flight. */
541
542 struct mbedtls_ssl_hs_buffer
543 {
544 unsigned is_valid : 1;
545 unsigned is_fragmented : 1;
546 unsigned is_complete : 1;
547 unsigned char *data;
548 size_t data_len;
549 } hs[MBEDTLS_SSL_MAX_BUFFERED_HS];
550
551 struct
552 {
553 unsigned char *data;
554 size_t len;
555 unsigned epoch;
556 } future_record;
557
558 } buffering;
559
560 uint16_t mtu; /*!< Handshake mtu, used to fragment outgoing messages */
561 #endif /* MBEDTLS_SSL_PROTO_DTLS */
562
563 /*
564 * Checksum contexts
565 */
566 #if defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1) || \
567 defined(MBEDTLS_SSL_PROTO_TLS1_1)
568 mbedtls_md5_context fin_md5;
569 mbedtls_sha1_context fin_sha1;
570 #endif
571 #if defined(MBEDTLS_SSL_PROTO_TLS1_2)
572 #if defined(MBEDTLS_SHA256_C)
573 #if defined(MBEDTLS_USE_PSA_CRYPTO)
574 psa_hash_operation_t fin_sha256_psa;
575 #else
576 mbedtls_sha256_context fin_sha256;
577 #endif
578 #endif
579 #if defined(MBEDTLS_SHA512_C)
580 #if defined(MBEDTLS_USE_PSA_CRYPTO)
581 psa_hash_operation_t fin_sha384_psa;
582 #else
583 mbedtls_sha512_context fin_sha512;
584 #endif
585 #endif
586 #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
587
588 void (*update_checksum)(mbedtls_ssl_context *, const unsigned char *, size_t);
589 void (*calc_verify)(const mbedtls_ssl_context *, unsigned char *, size_t *);
590 void (*calc_finished)(mbedtls_ssl_context *, unsigned char *, int);
591 mbedtls_ssl_tls_prf_cb *tls_prf;
592
593 mbedtls_ssl_ciphersuite_t const *ciphersuite_info;
594
595 size_t pmslen; /*!< premaster length */
596
597 unsigned char randbytes[64]; /*!< random bytes */
598 unsigned char premaster[MBEDTLS_PREMASTER_SIZE];
599 /*!< premaster secret */
600
601 int resume; /*!< session resume indicator*/
602 int max_major_ver; /*!< max. major version client*/
603 int max_minor_ver; /*!< max. minor version client*/
604 int cli_exts; /*!< client extension presence*/
605
606 #if defined(MBEDTLS_SSL_SESSION_TICKETS)
607 int new_session_ticket; /*!< use NewSessionTicket? */
608 #endif /* MBEDTLS_SSL_SESSION_TICKETS */
609 #if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
610 int extended_ms; /*!< use Extended Master Secret? */
611 #endif
612
613 #if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
614 unsigned int async_in_progress : 1; /*!< an asynchronous operation is in progress */
615 #endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
616
617 #if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
618 /** Asynchronous operation context. This field is meant for use by the
619 * asynchronous operation callbacks (mbedtls_ssl_config::f_async_sign_start,
620 * mbedtls_ssl_config::f_async_decrypt_start,
621 * mbedtls_ssl_config::f_async_resume, mbedtls_ssl_config::f_async_cancel).
622 * The library does not use it internally. */
623 void *user_async_ctx;
624 #endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
625 };
626
627 typedef struct mbedtls_ssl_hs_buffer mbedtls_ssl_hs_buffer;
628
629 /*
630 * Representation of decryption/encryption transformations on records
631 *
632 * There are the following general types of record transformations:
633 * - Stream transformations (TLS versions <= 1.2 only)
634 * Transformation adding a MAC and applying a stream-cipher
635 * to the authenticated message.
636 * - CBC block cipher transformations ([D]TLS versions <= 1.2 only)
637 * In addition to the distinction of the order of encryption and
638 * authentication, there's a fundamental difference between the
639 * handling in SSL3 & TLS 1.0 and TLS 1.1 and TLS 1.2: For SSL3
640 * and TLS 1.0, the final IV after processing a record is used
641 * as the IV for the next record. No explicit IV is contained
642 * in an encrypted record. The IV for the first record is extracted
643 * at key extraction time. In contrast, for TLS 1.1 and 1.2, no
644 * IV is generated at key extraction time, but every encrypted
645 * record is explicitly prefixed by the IV with which it was encrypted.
646 * - AEAD transformations ([D]TLS versions >= 1.2 only)
647 * These come in two fundamentally different versions, the first one
648 * used in TLS 1.2, excluding ChaChaPoly ciphersuites, and the second
649 * one used for ChaChaPoly ciphersuites in TLS 1.2 as well as for TLS 1.3.
650 * In the first transformation, the IV to be used for a record is obtained
651 * as the concatenation of an explicit, static 4-byte IV and the 8-byte
652 * record sequence number, and explicitly prepending this sequence number
653 * to the encrypted record. In contrast, in the second transformation
654 * the IV is obtained by XOR'ing a static IV obtained at key extraction
655 * time with the 8-byte record sequence number, without prepending the
656 * latter to the encrypted record.
657 *
658 * Additionally, DTLS 1.2 + CID as well as TLS 1.3 use an inner plaintext
659 * which allows to add flexible length padding and to hide a record's true
660 * content type.
661 *
662 * In addition to type and version, the following parameters are relevant:
663 * - The symmetric cipher algorithm to be used.
664 * - The (static) encryption/decryption keys for the cipher.
665 * - For stream/CBC, the type of message digest to be used.
666 * - For stream/CBC, (static) encryption/decryption keys for the digest.
667 * - For AEAD transformations, the size (potentially 0) of an explicit,
668 * random initialization vector placed in encrypted records.
669 * - For some transformations (currently AEAD and CBC in SSL3 and TLS 1.0)
670 * an implicit IV. It may be static (e.g. AEAD) or dynamic (e.g. CBC)
671 * and (if present) is combined with the explicit IV in a transformation-
672 * dependent way (e.g. appending in TLS 1.2 and XOR'ing in TLS 1.3).
673 * - For stream/CBC, a flag determining the order of encryption and MAC.
674 * - The details of the transformation depend on the SSL/TLS version.
675 * - The length of the authentication tag.
676 *
677 * Note: Except for CBC in SSL3 and TLS 1.0, these parameters are
678 * constant across multiple encryption/decryption operations.
679 * For CBC, the implicit IV needs to be updated after each
680 * operation.
681 *
682 * The struct below refines this abstract view as follows:
683 * - The cipher underlying the transformation is managed in
684 * cipher contexts cipher_ctx_{enc/dec}, which must have the
685 * same cipher type. The mode of these cipher contexts determines
686 * the type of the transformation in the sense above: e.g., if
687 * the type is MBEDTLS_CIPHER_AES_256_CBC resp. MBEDTLS_CIPHER_AES_192_GCM
688 * then the transformation has type CBC resp. AEAD.
689 * - The cipher keys are never stored explicitly but
690 * are maintained within cipher_ctx_{enc/dec}.
691 * - For stream/CBC transformations, the message digest contexts
692 * used for the MAC's are stored in md_ctx_{enc/dec}. These contexts
693 * are unused for AEAD transformations.
694 * - For stream/CBC transformations and versions > SSL3, the
695 * MAC keys are not stored explicitly but maintained within
696 * md_ctx_{enc/dec}.
697 * - For stream/CBC transformations and version SSL3, the MAC
698 * keys are stored explicitly in mac_enc, mac_dec and have
699 * a fixed size of 20 bytes. These fields are unused for
700 * AEAD transformations or transformations >= TLS 1.0.
701 * - For transformations using an implicit IV maintained within
702 * the transformation context, its contents are stored within
703 * iv_{enc/dec}.
704 * - The value of ivlen indicates the length of the IV.
705 * This is redundant in case of stream/CBC transformations
706 * which always use 0 resp. the cipher's block length as the
707 * IV length, but is needed for AEAD ciphers and may be
708 * different from the underlying cipher's block length
709 * in this case.
710 * - The field fixed_ivlen is nonzero for AEAD transformations only
711 * and indicates the length of the static part of the IV which is
712 * constant throughout the communication, and which is stored in
713 * the first fixed_ivlen bytes of the iv_{enc/dec} arrays.
714 * Note: For CBC in SSL3 and TLS 1.0, the fields iv_{enc/dec}
715 * still store IV's for continued use across multiple transformations,
716 * so it is not true that fixed_ivlen == 0 means that iv_{enc/dec} are
717 * not being used!
718 * - minor_ver denotes the SSL/TLS version
719 * - For stream/CBC transformations, maclen denotes the length of the
720 * authentication tag, while taglen is unused and 0.
721 * - For AEAD transformations, taglen denotes the length of the
722 * authentication tag, while maclen is unused and 0.
723 * - For CBC transformations, encrypt_then_mac determines the
724 * order of encryption and authentication. This field is unused
725 * in other transformations.
726 *
727 */
728 struct mbedtls_ssl_transform
729 {
730 /*
731 * Session specific crypto layer
732 */
733 size_t minlen; /*!< min. ciphertext length */
734 size_t ivlen; /*!< IV length */
735 size_t fixed_ivlen; /*!< Fixed part of IV (AEAD) */
736 size_t maclen; /*!< MAC(CBC) len */
737 size_t taglen; /*!< TAG(AEAD) len */
738
739 unsigned char iv_enc[16]; /*!< IV (encryption) */
740 unsigned char iv_dec[16]; /*!< IV (decryption) */
741
742 #if defined(MBEDTLS_SSL_SOME_MODES_USE_MAC)
743
744 #if defined(MBEDTLS_SSL_PROTO_SSL3)
745 /* Needed only for SSL v3.0 secret */
746 unsigned char mac_enc[20]; /*!< SSL v3.0 secret (enc) */
747 unsigned char mac_dec[20]; /*!< SSL v3.0 secret (dec) */
748 #endif /* MBEDTLS_SSL_PROTO_SSL3 */
749
750 mbedtls_md_context_t md_ctx_enc; /*!< MAC (encryption) */
751 mbedtls_md_context_t md_ctx_dec; /*!< MAC (decryption) */
752
753 #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
754 int encrypt_then_mac; /*!< flag for EtM activation */
755 #endif
756
757 #endif /* MBEDTLS_SSL_SOME_MODES_USE_MAC */
758
759 mbedtls_cipher_context_t cipher_ctx_enc; /*!< encryption context */
760 mbedtls_cipher_context_t cipher_ctx_dec; /*!< decryption context */
761 int minor_ver;
762
763 #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
764 uint8_t in_cid_len;
765 uint8_t out_cid_len;
766 unsigned char in_cid [ MBEDTLS_SSL_CID_OUT_LEN_MAX ];
767 unsigned char out_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ];
768 #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
769
770 /*
771 * Session specific compression layer
772 */
773 #if defined(MBEDTLS_ZLIB_SUPPORT)
774 z_stream ctx_deflate; /*!< compression context */
775 z_stream ctx_inflate; /*!< decompression context */
776 #endif
777
778 #if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
779 /* We need the Hello random bytes in order to re-derive keys from the
780 * Master Secret and other session info, see ssl_populate_transform() */
781 unsigned char randbytes[64]; /*!< ServerHello.random+ClientHello.random */
782 #endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */
783 };
784
785 /*
786 * Return 1 if the transform uses an AEAD cipher, 0 otherwise.
787 * Equivalently, return 0 if a separate MAC is used, 1 otherwise.
788 */
mbedtls_ssl_transform_uses_aead(const mbedtls_ssl_transform * transform)789 static inline int mbedtls_ssl_transform_uses_aead(
790 const mbedtls_ssl_transform *transform )
791 {
792 #if defined(MBEDTLS_SSL_SOME_MODES_USE_MAC)
793 return( transform->maclen == 0 && transform->taglen != 0 );
794 #else
795 (void) transform;
796 return( 1 );
797 #endif
798 }
799
800 /*
801 * Internal representation of record frames
802 *
803 * Instances come in two flavors:
804 * (1) Encrypted
805 * These always have data_offset = 0
806 * (2) Unencrypted
807 * These have data_offset set to the amount of
808 * pre-expansion during record protection. Concretely,
809 * this is the length of the fixed part of the explicit IV
810 * used for encryption, or 0 if no explicit IV is used
811 * (e.g. for CBC in TLS 1.0, or stream ciphers).
812 *
813 * The reason for the data_offset in the unencrypted case
814 * is to allow for in-place conversion of an unencrypted to
815 * an encrypted record. If the offset wasn't included, the
816 * encrypted content would need to be shifted afterwards to
817 * make space for the fixed IV.
818 *
819 */
820 #if MBEDTLS_SSL_CID_OUT_LEN_MAX > MBEDTLS_SSL_CID_IN_LEN_MAX
821 #define MBEDTLS_SSL_CID_LEN_MAX MBEDTLS_SSL_CID_OUT_LEN_MAX
822 #else
823 #define MBEDTLS_SSL_CID_LEN_MAX MBEDTLS_SSL_CID_IN_LEN_MAX
824 #endif
825
826 typedef struct
827 {
828 uint8_t ctr[8]; /* In TLS: The implicit record sequence number.
829 * In DTLS: The 2-byte epoch followed by
830 * the 6-byte sequence number.
831 * This is stored as a raw big endian byte array
832 * as opposed to a uint64_t because we rarely
833 * need to perform arithmetic on this, but do
834 * need it as a Byte array for the purpose of
835 * MAC computations. */
836 uint8_t type; /* The record content type. */
837 uint8_t ver[2]; /* SSL/TLS version as present on the wire.
838 * Convert to internal presentation of versions
839 * using mbedtls_ssl_read_version() and
840 * mbedtls_ssl_write_version().
841 * Keep wire-format for MAC computations. */
842
843 unsigned char *buf; /* Memory buffer enclosing the record content */
844 size_t buf_len; /* Buffer length */
845 size_t data_offset; /* Offset of record content */
846 size_t data_len; /* Length of record content */
847
848 #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
849 uint8_t cid_len; /* Length of the CID (0 if not present) */
850 unsigned char cid[ MBEDTLS_SSL_CID_LEN_MAX ]; /* The CID */
851 #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
852 } mbedtls_record;
853
854 #if defined(MBEDTLS_X509_CRT_PARSE_C)
855 /*
856 * List of certificate + private key pairs
857 */
858 struct mbedtls_ssl_key_cert
859 {
860 mbedtls_x509_crt *cert; /*!< cert */
861 mbedtls_pk_context *key; /*!< private key */
862 mbedtls_ssl_key_cert *next; /*!< next key/cert pair */
863 };
864 #endif /* MBEDTLS_X509_CRT_PARSE_C */
865
866 #if defined(MBEDTLS_SSL_PROTO_DTLS)
867 /*
868 * List of handshake messages kept around for resending
869 */
870 struct mbedtls_ssl_flight_item
871 {
872 unsigned char *p; /*!< message, including handshake headers */
873 size_t len; /*!< length of p */
874 unsigned char type; /*!< type of the message: handshake or CCS */
875 mbedtls_ssl_flight_item *next; /*!< next handshake message(s) */
876 };
877 #endif /* MBEDTLS_SSL_PROTO_DTLS */
878
879 #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
880 defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
881
882 /* Find an entry in a signature-hash set matching a given hash algorithm. */
883 mbedtls_md_type_t mbedtls_ssl_sig_hash_set_find( mbedtls_ssl_sig_hash_set_t *set,
884 mbedtls_pk_type_t sig_alg );
885 /* Add a signature-hash-pair to a signature-hash set */
886 void mbedtls_ssl_sig_hash_set_add( mbedtls_ssl_sig_hash_set_t *set,
887 mbedtls_pk_type_t sig_alg,
888 mbedtls_md_type_t md_alg );
889 /* Allow exactly one hash algorithm for each signature. */
890 void mbedtls_ssl_sig_hash_set_const_hash( mbedtls_ssl_sig_hash_set_t *set,
891 mbedtls_md_type_t md_alg );
892
893 /* Setup an empty signature-hash set */
mbedtls_ssl_sig_hash_set_init(mbedtls_ssl_sig_hash_set_t * set)894 static inline void mbedtls_ssl_sig_hash_set_init( mbedtls_ssl_sig_hash_set_t *set )
895 {
896 mbedtls_ssl_sig_hash_set_const_hash( set, MBEDTLS_MD_NONE );
897 }
898
899 #endif /* MBEDTLS_SSL_PROTO_TLS1_2) &&
900 MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
901
902 /**
903 * \brief Free referenced items in an SSL transform context and clear
904 * memory
905 *
906 * \param transform SSL transform context
907 */
908 void mbedtls_ssl_transform_free( mbedtls_ssl_transform *transform );
909
910 /**
911 * \brief Free referenced items in an SSL handshake context and clear
912 * memory
913 *
914 * \param ssl SSL context
915 */
916 void mbedtls_ssl_handshake_free( mbedtls_ssl_context *ssl );
917
918 int mbedtls_ssl_handshake_client_step( mbedtls_ssl_context *ssl );
919 int mbedtls_ssl_handshake_server_step( mbedtls_ssl_context *ssl );
920 void mbedtls_ssl_handshake_wrapup( mbedtls_ssl_context *ssl );
921
922 int mbedtls_ssl_send_fatal_handshake_failure( mbedtls_ssl_context *ssl );
923
924 void mbedtls_ssl_reset_checksum( mbedtls_ssl_context *ssl );
925 int mbedtls_ssl_derive_keys( mbedtls_ssl_context *ssl );
926
927 int mbedtls_ssl_handle_message_type( mbedtls_ssl_context *ssl );
928 int mbedtls_ssl_prepare_handshake_record( mbedtls_ssl_context *ssl );
929 void mbedtls_ssl_update_handshake_status( mbedtls_ssl_context *ssl );
930
931 /**
932 * \brief Update record layer
933 *
934 * This function roughly separates the implementation
935 * of the logic of (D)TLS from the implementation
936 * of the secure transport.
937 *
938 * \param ssl The SSL context to use.
939 * \param update_hs_digest This indicates if the handshake digest
940 * should be automatically updated in case
941 * a handshake message is found.
942 *
943 * \return 0 or non-zero error code.
944 *
945 * \note A clarification on what is called 'record layer' here
946 * is in order, as many sensible definitions are possible:
947 *
948 * The record layer takes as input an untrusted underlying
949 * transport (stream or datagram) and transforms it into
950 * a serially multiplexed, secure transport, which
951 * conceptually provides the following:
952 *
953 * (1) Three datagram based, content-agnostic transports
954 * for handshake, alert and CCS messages.
955 * (2) One stream- or datagram-based transport
956 * for application data.
957 * (3) Functionality for changing the underlying transform
958 * securing the contents.
959 *
960 * The interface to this functionality is given as follows:
961 *
962 * a Updating
963 * [Currently implemented by mbedtls_ssl_read_record]
964 *
965 * Check if and on which of the four 'ports' data is pending:
966 * Nothing, a controlling datagram of type (1), or application
967 * data (2). In any case data is present, internal buffers
968 * provide access to the data for the user to process it.
969 * Consumption of type (1) datagrams is done automatically
970 * on the next update, invalidating that the internal buffers
971 * for previous datagrams, while consumption of application
972 * data (2) is user-controlled.
973 *
974 * b Reading of application data
975 * [Currently manual adaption of ssl->in_offt pointer]
976 *
977 * As mentioned in the last paragraph, consumption of data
978 * is different from the automatic consumption of control
979 * datagrams (1) because application data is treated as a stream.
980 *
981 * c Tracking availability of application data
982 * [Currently manually through decreasing ssl->in_msglen]
983 *
984 * For efficiency and to retain datagram semantics for
985 * application data in case of DTLS, the record layer
986 * provides functionality for checking how much application
987 * data is still available in the internal buffer.
988 *
989 * d Changing the transformation securing the communication.
990 *
991 * Given an opaque implementation of the record layer in the
992 * above sense, it should be possible to implement the logic
993 * of (D)TLS on top of it without the need to know anything
994 * about the record layer's internals. This is done e.g.
995 * in all the handshake handling functions, and in the
996 * application data reading function mbedtls_ssl_read.
997 *
998 * \note The above tries to give a conceptual picture of the
999 * record layer, but the current implementation deviates
1000 * from it in some places. For example, our implementation of
1001 * the update functionality through mbedtls_ssl_read_record
1002 * discards datagrams depending on the current state, which
1003 * wouldn't fall under the record layer's responsibility
1004 * following the above definition.
1005 *
1006 */
1007 int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl,
1008 unsigned update_hs_digest );
1009 int mbedtls_ssl_fetch_input( mbedtls_ssl_context *ssl, size_t nb_want );
1010
1011 int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl );
1012 int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl, uint8_t force_flush );
1013 int mbedtls_ssl_flush_output( mbedtls_ssl_context *ssl );
1014
1015 int mbedtls_ssl_parse_certificate( mbedtls_ssl_context *ssl );
1016 int mbedtls_ssl_write_certificate( mbedtls_ssl_context *ssl );
1017
1018 int mbedtls_ssl_parse_change_cipher_spec( mbedtls_ssl_context *ssl );
1019 int mbedtls_ssl_write_change_cipher_spec( mbedtls_ssl_context *ssl );
1020
1021 int mbedtls_ssl_parse_finished( mbedtls_ssl_context *ssl );
1022 int mbedtls_ssl_write_finished( mbedtls_ssl_context *ssl );
1023
1024 void mbedtls_ssl_optimize_checksum( mbedtls_ssl_context *ssl,
1025 const mbedtls_ssl_ciphersuite_t *ciphersuite_info );
1026
1027 #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
1028 int mbedtls_ssl_psk_derive_premaster( mbedtls_ssl_context *ssl, mbedtls_key_exchange_type_t key_ex );
1029
1030 /**
1031 * Get the first defined PSK by order of precedence:
1032 * 1. handshake PSK set by \c mbedtls_ssl_set_hs_psk() in the PSK callback
1033 * 2. static PSK configured by \c mbedtls_ssl_conf_psk()
1034 * Return a code and update the pair (PSK, PSK length) passed to this function
1035 */
mbedtls_ssl_get_psk(const mbedtls_ssl_context * ssl,const unsigned char ** psk,size_t * psk_len)1036 static inline int mbedtls_ssl_get_psk( const mbedtls_ssl_context *ssl,
1037 const unsigned char **psk, size_t *psk_len )
1038 {
1039 if( ssl->handshake->psk != NULL && ssl->handshake->psk_len > 0 )
1040 {
1041 *psk = ssl->handshake->psk;
1042 *psk_len = ssl->handshake->psk_len;
1043 }
1044
1045 else if( ssl->conf->psk != NULL && ssl->conf->psk_len > 0 )
1046 {
1047 *psk = ssl->conf->psk;
1048 *psk_len = ssl->conf->psk_len;
1049 }
1050
1051 else
1052 {
1053 *psk = NULL;
1054 *psk_len = 0;
1055 return( MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED );
1056 }
1057
1058 return( 0 );
1059 }
1060
1061 #if defined(MBEDTLS_USE_PSA_CRYPTO)
1062 /**
1063 * Get the first defined opaque PSK by order of precedence:
1064 * 1. handshake PSK set by \c mbedtls_ssl_set_hs_psk_opaque() in the PSK
1065 * callback
1066 * 2. static PSK configured by \c mbedtls_ssl_conf_psk_opaque()
1067 * Return an opaque PSK
1068 */
mbedtls_ssl_get_opaque_psk(const mbedtls_ssl_context * ssl)1069 static inline psa_key_id_t mbedtls_ssl_get_opaque_psk(
1070 const mbedtls_ssl_context *ssl )
1071 {
1072 if( ! mbedtls_svc_key_id_is_null( ssl->handshake->psk_opaque ) )
1073 return( ssl->handshake->psk_opaque );
1074
1075 if( ! mbedtls_svc_key_id_is_null( ssl->conf->psk_opaque ) )
1076 return( ssl->conf->psk_opaque );
1077
1078 return( MBEDTLS_SVC_KEY_ID_INIT );
1079 }
1080 #endif /* MBEDTLS_USE_PSA_CRYPTO */
1081
1082 #endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
1083
1084 #if defined(MBEDTLS_PK_C)
1085 unsigned char mbedtls_ssl_sig_from_pk( mbedtls_pk_context *pk );
1086 unsigned char mbedtls_ssl_sig_from_pk_alg( mbedtls_pk_type_t type );
1087 mbedtls_pk_type_t mbedtls_ssl_pk_alg_from_sig( unsigned char sig );
1088 #endif
1089
1090 mbedtls_md_type_t mbedtls_ssl_md_alg_from_hash( unsigned char hash );
1091 unsigned char mbedtls_ssl_hash_from_md_alg( int md );
1092 int mbedtls_ssl_set_calc_verify_md( mbedtls_ssl_context *ssl, int md );
1093
1094 #if defined(MBEDTLS_ECP_C)
1095 int mbedtls_ssl_check_curve( const mbedtls_ssl_context *ssl, mbedtls_ecp_group_id grp_id );
1096 #endif
1097
1098 #if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
1099 int mbedtls_ssl_check_sig_hash( const mbedtls_ssl_context *ssl,
1100 mbedtls_md_type_t md );
1101 #endif
1102
1103 #if defined(MBEDTLS_SSL_DTLS_SRTP)
mbedtls_ssl_check_srtp_profile_value(const uint16_t srtp_profile_value)1104 static inline mbedtls_ssl_srtp_profile mbedtls_ssl_check_srtp_profile_value
1105 ( const uint16_t srtp_profile_value )
1106 {
1107 switch( srtp_profile_value )
1108 {
1109 case MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_80:
1110 case MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_32:
1111 case MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_80:
1112 case MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_32:
1113 return srtp_profile_value;
1114 default: break;
1115 }
1116 return( MBEDTLS_TLS_SRTP_UNSET );
1117 }
1118 #endif
1119
1120 #if defined(MBEDTLS_X509_CRT_PARSE_C)
mbedtls_ssl_own_key(mbedtls_ssl_context * ssl)1121 static inline mbedtls_pk_context *mbedtls_ssl_own_key( mbedtls_ssl_context *ssl )
1122 {
1123 mbedtls_ssl_key_cert *key_cert;
1124
1125 if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL )
1126 key_cert = ssl->handshake->key_cert;
1127 else
1128 key_cert = ssl->conf->key_cert;
1129
1130 return( key_cert == NULL ? NULL : key_cert->key );
1131 }
1132
mbedtls_ssl_own_cert(mbedtls_ssl_context * ssl)1133 static inline mbedtls_x509_crt *mbedtls_ssl_own_cert( mbedtls_ssl_context *ssl )
1134 {
1135 mbedtls_ssl_key_cert *key_cert;
1136
1137 if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL )
1138 key_cert = ssl->handshake->key_cert;
1139 else
1140 key_cert = ssl->conf->key_cert;
1141
1142 return( key_cert == NULL ? NULL : key_cert->cert );
1143 }
1144
1145 /*
1146 * Check usage of a certificate wrt extensions:
1147 * keyUsage, extendedKeyUsage (later), and nSCertType (later).
1148 *
1149 * Warning: cert_endpoint is the endpoint of the cert (ie, of our peer when we
1150 * check a cert we received from them)!
1151 *
1152 * Return 0 if everything is OK, -1 if not.
1153 */
1154 int mbedtls_ssl_check_cert_usage( const mbedtls_x509_crt *cert,
1155 const mbedtls_ssl_ciphersuite_t *ciphersuite,
1156 int cert_endpoint,
1157 uint32_t *flags );
1158 #endif /* MBEDTLS_X509_CRT_PARSE_C */
1159
1160 void mbedtls_ssl_write_version( int major, int minor, int transport,
1161 unsigned char ver[2] );
1162 void mbedtls_ssl_read_version( int *major, int *minor, int transport,
1163 const unsigned char ver[2] );
1164
mbedtls_ssl_in_hdr_len(const mbedtls_ssl_context * ssl)1165 static inline size_t mbedtls_ssl_in_hdr_len( const mbedtls_ssl_context *ssl )
1166 {
1167 #if !defined(MBEDTLS_SSL_PROTO_DTLS)
1168 ((void) ssl);
1169 #endif
1170
1171 #if defined(MBEDTLS_SSL_PROTO_DTLS)
1172 if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
1173 {
1174 return( 13 );
1175 }
1176 else
1177 #endif /* MBEDTLS_SSL_PROTO_DTLS */
1178 {
1179 return( 5 );
1180 }
1181 }
1182
mbedtls_ssl_out_hdr_len(const mbedtls_ssl_context * ssl)1183 static inline size_t mbedtls_ssl_out_hdr_len( const mbedtls_ssl_context *ssl )
1184 {
1185 return( (size_t) ( ssl->out_iv - ssl->out_hdr ) );
1186 }
1187
mbedtls_ssl_hs_hdr_len(const mbedtls_ssl_context * ssl)1188 static inline size_t mbedtls_ssl_hs_hdr_len( const mbedtls_ssl_context *ssl )
1189 {
1190 #if defined(MBEDTLS_SSL_PROTO_DTLS)
1191 if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
1192 return( 12 );
1193 #else
1194 ((void) ssl);
1195 #endif
1196 return( 4 );
1197 }
1198
1199 #if defined(MBEDTLS_SSL_PROTO_DTLS)
1200 void mbedtls_ssl_send_flight_completed( mbedtls_ssl_context *ssl );
1201 void mbedtls_ssl_recv_flight_completed( mbedtls_ssl_context *ssl );
1202 int mbedtls_ssl_resend( mbedtls_ssl_context *ssl );
1203 int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl );
1204 #endif
1205
1206 /* Visible for testing purposes only */
1207 #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
1208 int mbedtls_ssl_dtls_replay_check( mbedtls_ssl_context const *ssl );
1209 void mbedtls_ssl_dtls_replay_update( mbedtls_ssl_context *ssl );
1210 #endif
1211
1212 int mbedtls_ssl_session_copy( mbedtls_ssl_session *dst,
1213 const mbedtls_ssl_session *src );
1214
1215 /* constant-time buffer comparison */
mbedtls_ssl_safer_memcmp(const void * a,const void * b,size_t n)1216 static inline int mbedtls_ssl_safer_memcmp( const void *a, const void *b, size_t n )
1217 {
1218 size_t i;
1219 volatile const unsigned char *A = (volatile const unsigned char *) a;
1220 volatile const unsigned char *B = (volatile const unsigned char *) b;
1221 volatile unsigned char diff = 0;
1222
1223 for( i = 0; i < n; i++ )
1224 {
1225 /* Read volatile data in order before computing diff.
1226 * This avoids IAR compiler warning:
1227 * 'the order of volatile accesses is undefined ..' */
1228 unsigned char x = A[i], y = B[i];
1229 diff |= x ^ y;
1230 }
1231
1232 return( diff );
1233 }
1234
1235 #if defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1) || \
1236 defined(MBEDTLS_SSL_PROTO_TLS1_1)
1237 int mbedtls_ssl_get_key_exchange_md_ssl_tls( mbedtls_ssl_context *ssl,
1238 unsigned char *output,
1239 unsigned char *data, size_t data_len );
1240 #endif /* MBEDTLS_SSL_PROTO_SSL3 || MBEDTLS_SSL_PROTO_TLS1 || \
1241 MBEDTLS_SSL_PROTO_TLS1_1 */
1242
1243 #if defined(MBEDTLS_SSL_PROTO_TLS1) || defined(MBEDTLS_SSL_PROTO_TLS1_1) || \
1244 defined(MBEDTLS_SSL_PROTO_TLS1_2)
1245 /* The hash buffer must have at least MBEDTLS_MD_MAX_SIZE bytes of length. */
1246 int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl,
1247 unsigned char *hash, size_t *hashlen,
1248 unsigned char *data, size_t data_len,
1249 mbedtls_md_type_t md_alg );
1250 #endif /* MBEDTLS_SSL_PROTO_TLS1 || MBEDTLS_SSL_PROTO_TLS1_1 || \
1251 MBEDTLS_SSL_PROTO_TLS1_2 */
1252
1253 #ifdef __cplusplus
1254 }
1255 #endif
1256
1257 void mbedtls_ssl_transform_init( mbedtls_ssl_transform *transform );
1258 int mbedtls_ssl_encrypt_buf( mbedtls_ssl_context *ssl,
1259 mbedtls_ssl_transform *transform,
1260 mbedtls_record *rec,
1261 int (*f_rng)(void *, unsigned char *, size_t),
1262 void *p_rng );
1263 int mbedtls_ssl_decrypt_buf( mbedtls_ssl_context const *ssl,
1264 mbedtls_ssl_transform *transform,
1265 mbedtls_record *rec );
1266
1267 /* Length of the "epoch" field in the record header */
mbedtls_ssl_ep_len(const mbedtls_ssl_context * ssl)1268 static inline size_t mbedtls_ssl_ep_len( const mbedtls_ssl_context *ssl )
1269 {
1270 #if defined(MBEDTLS_SSL_PROTO_DTLS)
1271 if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
1272 return( 2 );
1273 #else
1274 ((void) ssl);
1275 #endif
1276 return( 0 );
1277 }
1278
1279 #if defined(MBEDTLS_SSL_PROTO_DTLS)
1280 int mbedtls_ssl_resend_hello_request( mbedtls_ssl_context *ssl );
1281 #endif /* MBEDTLS_SSL_PROTO_DTLS */
1282
1283 void mbedtls_ssl_set_timer( mbedtls_ssl_context *ssl, uint32_t millisecs );
1284 int mbedtls_ssl_check_timer( mbedtls_ssl_context *ssl );
1285
1286 void mbedtls_ssl_reset_in_out_pointers( mbedtls_ssl_context *ssl );
1287 void mbedtls_ssl_update_out_pointers( mbedtls_ssl_context *ssl,
1288 mbedtls_ssl_transform *transform );
1289 void mbedtls_ssl_update_in_pointers( mbedtls_ssl_context *ssl );
1290
1291 int mbedtls_ssl_session_reset_int( mbedtls_ssl_context *ssl, int partial );
1292
1293 #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
1294 void mbedtls_ssl_dtls_replay_reset( mbedtls_ssl_context *ssl );
1295 #endif
1296
1297 void mbedtls_ssl_handshake_wrapup_free_hs_transform( mbedtls_ssl_context *ssl );
1298
1299 #if defined(MBEDTLS_SSL_RENEGOTIATION)
1300 int mbedtls_ssl_start_renegotiation( mbedtls_ssl_context *ssl );
1301 #endif /* MBEDTLS_SSL_RENEGOTIATION */
1302
1303 #if defined(MBEDTLS_SSL_PROTO_DTLS)
1304 size_t mbedtls_ssl_get_current_mtu( const mbedtls_ssl_context *ssl );
1305 void mbedtls_ssl_buffering_free( mbedtls_ssl_context *ssl );
1306 void mbedtls_ssl_flight_free( mbedtls_ssl_flight_item *flight );
1307 #endif /* MBEDTLS_SSL_PROTO_DTLS */
1308
1309 #endif /* ssl_internal.h */
1310
