1 /* 2 * Copyright (c) 2018-2019 Nordic Semiconductor ASA 3 * 4 * SPDX-License-Identifier: Apache-2.0 5 */ 6 7 #define IS_ACL_HANDLE(_handle) ((_handle) < CONFIG_BT_MAX_CONN) 8 9 enum llcp { 10 LLCP_NONE, 11 LLCP_CONN_UPD, 12 LLCP_CHAN_MAP, 13 14 /* 15 * LLCP_TERMINATE, 16 * LLCP_FEATURE_EXCHANGE, 17 * LLCP_VERSION_EXCHANGE, 18 */ 19 20 #if defined(CONFIG_BT_CTLR_LE_ENC) 21 LLCP_ENCRYPTION, 22 #endif /* CONFIG_BT_CTLR_LE_ENC */ 23 24 LLCP_CONNECTION_PARAM_REQ, 25 26 #if defined(CONFIG_BT_CTLR_LE_PING) 27 LLCP_PING, 28 #endif /* CONFIG_BT_CTLR_LE_PING */ 29 30 #if defined(CONFIG_BT_CTLR_PHY) 31 LLCP_PHY_UPD, 32 #endif /* CONFIG_BT_CTLR_PHY */ 33 }; 34 35 /* 36 * to reduce length and unreadability of the ll_conn struct the 37 * structures inside it have been defined first 38 */ 39 struct llcp_struct { 40 /* Local Request */ 41 struct { 42 sys_slist_t pend_proc_list; 43 uint8_t state; 44 /* Procedure Response Timeout timer expire value */ 45 uint16_t prt_expire; 46 uint8_t pause; 47 } local; 48 49 /* Remote Request */ 50 struct { 51 sys_slist_t pend_proc_list; 52 uint8_t state; 53 /* Procedure Response Timeout timer expire value */ 54 uint16_t prt_expire; 55 uint8_t pause; 56 uint8_t collision; 57 uint8_t incompat; 58 uint8_t reject_opcode; 59 #if defined(CONFIG_BT_CTLR_DF_CONN_CTE_RSP) || defined(CONFIG_BT_CTLR_DF_CONN_CTE_REQ) 60 uint8_t paused_cmd; 61 #endif /* CONFIG_BT_CTLR_DF_CONN_CTE_RSP || CONFIG_BT_CTLR_DF_CONN_CTE_REQ */ 62 } remote; 63 64 /* Procedure Response Timeout timer reload value */ 65 uint16_t prt_reload; 66 67 /* Prepare parameters */ 68 struct { 69 uint32_t ticks_at_expire; /* Vendor specific tick units */ 70 uint32_t remainder; /* Vendor specific remainder fraction of a tick unit */ 71 uint16_t lazy; /* Previous skipped radio event count */ 72 } prep; 73 74 /* Version Exchange Procedure State */ 75 struct { 76 uint8_t sent; 77 uint8_t valid; 78 struct pdu_data_llctrl_version_ind cached; 79 } vex; 80 81 /* 82 * As of today only 36 feature bits are in use, 83 * so some optimisation is possible 84 * we also need to keep track of the features of the 85 * other node, so that we can send a proper 86 * reply over HCI to the host 87 * see BT Core spec 5.2 Vol 6, Part B, sec. 5.1.4 88 */ 89 struct { 90 uint8_t valid; 91 /* 92 * Stores features supported by peer device. The content of the member may be 93 * verified when feature exchange procedure has completed, valid member is set to 1. 94 */ 95 uint64_t features_peer; 96 /* 97 * Stores features common for two connected devices. Before feature exchange 98 * procedure is completed, the member stores information about all features 99 * supported by local device. After completion of the procedure, the feature set 100 * may be limited to features that are common. 101 */ 102 uint64_t features_used; 103 } fex; 104 105 /* Minimum used channels procedure state */ 106 struct { 107 uint8_t phys; 108 uint8_t min_used_chans; 109 } muc; 110 111 /* TODO: we'll need the next few structs eventually, 112 * Thomas and Szymon please comment on names etc. 113 */ 114 struct { 115 uint16_t *pdu_win_offset; 116 uint32_t ticks_anchor; 117 } conn_upd; 118 119 #if defined(CONFIG_BT_CTLR_DF_CONN_CTE_REQ) 120 /* @brief Constant Tone Extension configuration for CTE request control procedure. */ 121 struct llcp_df_req_cfg { 122 /* Procedure may be active periodically, active state must be stored. 123 * If procedure is active, request parameters update may not be issued. 124 */ 125 volatile uint8_t is_enabled; 126 uint8_t cte_type; 127 /* Minimum requested CTE length in 8us units */ 128 uint8_t min_cte_len; 129 uint16_t req_interval; 130 uint16_t req_expire; 131 } cte_req; 132 #endif /* CONFIG_BT_CTLR_DF_CONN_CTE_REQ */ 133 134 #if defined(CONFIG_BT_CTLR_DF_CONN_CTE_RSP) 135 struct llcp_df_rsp_cfg { 136 uint8_t is_enabled:1; 137 uint8_t is_active:1; 138 uint8_t cte_types; 139 uint8_t max_cte_len; 140 void *disable_param; 141 void (*disable_cb)(void *param); 142 } cte_rsp; 143 #endif /* CONFIG_BT_CTLR_DF_CONN_CTE_RSP */ 144 145 struct { 146 uint8_t terminate_ack; 147 } cis; 148 149 uint8_t tx_buffer_alloc; 150 uint8_t tx_q_pause_data_mask; 151 152 struct node_rx_pdu *rx_node_release; 153 struct node_tx *tx_node_release; 154 155 }; /* struct llcp_struct */ 156 157 struct ll_conn { 158 struct ull_hdr ull; 159 struct lll_conn lll; 160 161 struct ull_tx_q tx_q; 162 struct llcp_struct llcp; 163 164 struct { 165 uint8_t reason_final; 166 /* node rx type with memory aligned storage for terminate 167 * reason. 168 * HCI will reference the value using the pdu member of 169 * struct node_rx_pdu. 170 */ 171 struct { 172 struct node_rx_hdr hdr; 173 174 uint8_t reason __aligned(4); 175 } node_rx; 176 } llcp_terminate; 177 178 /* 179 * TODO: all the following comes from the legacy LL llcp structure 180 * and/or needs to be properly integrated in the control procedures 181 */ 182 union { 183 struct { 184 #if defined(CONFIG_BT_CTLR_CONN_META) 185 uint8_t is_must_expire:1; 186 #endif /* CONFIG_BT_CTLR_CONN_META */ 187 } common; 188 #if defined(CONFIG_BT_PERIPHERAL) 189 struct { 190 #if defined(CONFIG_BT_CTLR_CONN_META) 191 uint8_t is_must_expire:1; 192 #endif /* CONFIG_BT_CTLR_CONN_META */ 193 uint8_t latency_cancel:1; 194 uint8_t sca:3; 195 uint32_t force; 196 uint32_t ticks_to_offset; 197 } periph; 198 #endif /* CONFIG_BT_PERIPHERAL */ 199 200 #if defined(CONFIG_BT_CENTRAL) 201 struct { 202 #if defined(CONFIG_BT_CTLR_CONN_META) 203 uint8_t is_must_expire:1; 204 #endif /* CONFIG_BT_CTLR_CONN_META */ 205 } central; 206 #endif /* CONFIG_BT_CENTRAL */ 207 }; 208 209 /* Cancel the prepare in the instant a Connection Update takes place */ 210 uint8_t cancel_prepare:1; 211 212 #if defined(CONFIG_BT_CTLR_LE_ENC) 213 /* Pause Rx data PDU's */ 214 uint8_t pause_rx_data:1; 215 #endif /* CONFIG_BT_CTLR_LE_ENC */ 216 217 #if defined(CONFIG_BT_CTLR_LE_PING) 218 uint16_t appto_reload; 219 uint16_t appto_expire; 220 uint16_t apto_reload; 221 uint16_t apto_expire; 222 #endif /* CONFIG_BT_CTLR_LE_PING */ 223 224 uint16_t connect_expire; 225 uint16_t supervision_timeout; 226 uint16_t supervision_expire; 227 uint32_t connect_accept_to; 228 229 #if defined(CONFIG_BT_CTLR_PHY) 230 uint8_t phy_pref_tx:3; 231 uint8_t phy_pref_rx:3; 232 #endif /* CONFIG_BT_CTLR_PHY */ 233 #if defined(CONFIG_BT_CTLR_DATA_LENGTH) 234 uint16_t default_tx_octets; 235 236 #if defined(CONFIG_BT_CTLR_PHY) 237 uint16_t default_tx_time; 238 #endif /* CONFIG_BT_CTLR_PHY */ 239 #endif /* CONFIG_BT_CTLR_DATA_LENGTH */ 240 241 #if defined(CONFIG_BT_CTLR_CHECK_SAME_PEER_CONN) 242 uint8_t own_id_addr_type:1; 243 uint8_t peer_id_addr_type:1; 244 uint8_t own_id_addr[BDADDR_SIZE]; 245 uint8_t peer_id_addr[BDADDR_SIZE]; 246 #endif /* CONFIG_BT_CTLR_CHECK_SAME_PEER_CONN */ 247 248 #if defined(CONFIG_BT_CTLR_LLID_DATA_START_EMPTY) 249 /* Detect empty L2CAP start frame */ 250 uint8_t start_empty:1; 251 #endif /* CONFIG_BT_CTLR_LLID_DATA_START_EMPTY */ 252 }; /* struct ll_conn */ 253 254 struct node_rx_cc { 255 uint8_t status; 256 uint8_t role; 257 uint8_t peer_addr_type; 258 uint8_t peer_addr[BDADDR_SIZE]; 259 #if defined(CONFIG_BT_CTLR_PRIVACY) 260 uint8_t peer_rpa[BDADDR_SIZE]; 261 uint8_t local_rpa[BDADDR_SIZE]; 262 #endif /* CONFIG_BT_CTLR_PRIVACY */ 263 uint16_t interval; 264 uint16_t latency; 265 uint16_t timeout; 266 uint8_t sca; 267 }; 268 269 struct node_rx_cu { 270 uint8_t status; 271 uint16_t interval; 272 uint16_t latency; 273 uint16_t timeout; 274 }; 275 276 struct node_rx_cs { 277 uint8_t csa; 278 }; 279 280 struct node_rx_pu { 281 uint8_t status; 282 uint8_t tx; 283 uint8_t rx; 284 }; 285 286 struct node_rx_sca { 287 uint8_t status; 288 uint8_t sca; 289 }; 290
