1 /*
2  * wpa_supplicant/hostapd control interface library
3  * Copyright (c) 2004-2017, Jouni Malinen <j@w1.fi>
4  *
5  * This software may be distributed under the terms of the BSD license.
6  * See README for more details.
7  */
8 
9 #ifndef WPA_CTRL_H
10 #define WPA_CTRL_H
11 
12 #ifdef  __cplusplus
13 extern "C" {
14 #endif
15 extern struct wpa_ctrl *ctrl_conn;
16 extern char *ifname_prefix;
17 
18 /* wpa_supplicant control interface - fixed message prefixes */
19 
20 /** Interactive request for identity/password/pin */
21 #define WPA_CTRL_REQ "CTRL-REQ-"
22 
23 /** Response to identity/password/pin request */
24 #define WPA_CTRL_RSP "CTRL-RSP-"
25 
26 /* Event messages with fixed prefix */
27 /** Authentication completed successfully and data connection enabled */
28 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
29 /** Disconnected, data connection is not available */
30 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
31 /** Association rejected during connection attempt */
32 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
33 /** Authentication rejected during connection attempt */
34 #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
35 /** wpa_supplicant is exiting */
36 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
37 /** Password change was completed successfully */
38 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
39 /** EAP-Request/Notification received */
40 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
41 /** EAP authentication started (EAP-Request/Identity received) */
42 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
43 /** EAP method proposed by the server */
44 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
45 /** EAP method selected */
46 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
47 /** EAP peer certificate from TLS */
48 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
49 /** EAP peer certificate alternative subject name component from TLS */
50 #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
51 /** EAP TLS certificate chain validation error */
52 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
53 /** EAP status */
54 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
55 /** Retransmit the previous request packet */
56 #define WPA_EVENT_EAP_RETRANSMIT "CTRL-EVENT-EAP-RETRANSMIT "
57 #define WPA_EVENT_EAP_RETRANSMIT2 "CTRL-EVENT-EAP-RETRANSMIT2 "
58 /** EAP authentication completed successfully */
59 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
60 #define WPA_EVENT_EAP_SUCCESS2 "CTRL-EVENT-EAP-SUCCESS2 "
61 /** EAP authentication failed (EAP-Failure received) */
62 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
63 #define WPA_EVENT_EAP_FAILURE2 "CTRL-EVENT-EAP-FAILURE2 "
64 /** EAP authentication failed due to no response received */
65 #define WPA_EVENT_EAP_TIMEOUT_FAILURE "CTRL-EVENT-EAP-TIMEOUT-FAILURE "
66 #define WPA_EVENT_EAP_TIMEOUT_FAILURE2 "CTRL-EVENT-EAP-TIMEOUT-FAILURE2 "
67 #define WPA_EVENT_EAP_ERROR_CODE "EAP-ERROR-CODE "
68 /** Network block temporarily disabled (e.g., due to authentication failure) */
69 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
70 /** Temporarily disabled network block re-enabled */
71 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
72 /** New scan started */
73 #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
74 /** New scan results available */
75 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
76 /** Scan command failed */
77 #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
78 /** wpa_supplicant state change */
79 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
80 /** A new BSS entry was added (followed by BSS entry id and BSSID) */
81 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
82 /** A BSS entry was removed (followed by BSS entry id and BSSID) */
83 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
84 /** No suitable network was found */
85 #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
86 /** Change in the signal level was reported by the driver */
87 #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
88 /** Beacon loss reported by the driver */
89 #define WPA_EVENT_BEACON_LOSS "CTRL-EVENT-BEACON-LOSS "
90 /** Regulatory domain channel */
91 #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
92 /** Channel switch started (followed by freq=<MHz> and other channel parameters)
93  */
94 #define WPA_EVENT_CHANNEL_SWITCH_STARTED "CTRL-EVENT-STARTED-CHANNEL-SWITCH "
95 /** Channel switch (followed by freq=<MHz> and other channel parameters) */
96 #define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH "
97 /** SAE authentication failed due to unknown password identifier */
98 #define WPA_EVENT_SAE_UNKNOWN_PASSWORD_IDENTIFIER \
99 	"CTRL-EVENT-SAE-UNKNOWN-PASSWORD-IDENTIFIER "
100 /** Unprotected Beacon frame dropped */
101 #define WPA_EVENT_UNPROT_BEACON "CTRL-EVENT-UNPROT-BEACON "
102 /** Decision made to do a within-ESS roam */
103 #define WPA_EVENT_DO_ROAM "CTRL-EVENT-DO-ROAM "
104 /** Decision made to skip a within-ESS roam */
105 #define WPA_EVENT_SKIP_ROAM "CTRL-EVENT-SKIP-ROAM "
106 
107 /** IP subnet status change notification
108  *
109  * When using an offloaded roaming mechanism where driver/firmware takes care
110  * of roaming and IP subnet validation checks post-roaming, this event can
111  * indicate whether IP subnet has changed.
112  *
113  * The event has a status=<0/1/2> parameter where
114  * 0 = unknown
115  * 1 = IP subnet unchanged (can continue to use the old IP address)
116  * 2 = IP subnet changed (need to get a new IP address)
117  */
118 #define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE "
119 
120 /** RSN IBSS 4-way handshakes completed with specified peer */
121 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
122 
123 /** Notification of frequency conflict due to a concurrent operation.
124  *
125  * The indicated network is disabled and needs to be re-enabled before it can
126  * be used again.
127  */
128 #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
129 /** Frequency ranges that the driver recommends to avoid */
130 #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
131 /** A new network profile was added (followed by network entry id) */
132 #define WPA_EVENT_NETWORK_ADDED "CTRL-EVENT-NETWORK-ADDED "
133 /** A network profile was removed (followed by prior network entry id) */
134 #define WPA_EVENT_NETWORK_REMOVED "CTRL-EVENT-NETWORK-REMOVED "
135 /** Result of MSCS setup */
136 #define WPA_EVENT_MSCS_RESULT "CTRL-EVENT-MSCS-RESULT "
137 /** WPS overlap detected in PBC mode */
138 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
139 /** Available WPS AP with active PBC found in scan results */
140 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
141 /** Available WPS AP with our address as authorized in scan results */
142 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
143 /** Available WPS AP with recently selected PIN registrar found in scan results
144  */
145 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
146 /** Available WPS AP found in scan results */
147 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
148 /** A new credential received */
149 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
150 /** M2D received */
151 #define WPS_EVENT_M2D "WPS-M2D "
152 /** WPS registration failed after M2/M2D */
153 #define WPS_EVENT_FAIL "WPS-FAIL "
154 /** WPS registration completed successfully */
155 #define WPS_EVENT_SUCCESS "WPS-SUCCESS "
156 /** WPS enrollment attempt timed out and was terminated */
157 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
158 /* PBC mode was activated */
159 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
160 /* PBC mode was disabled */
161 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
162 
163 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
164 
165 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
166 /** Result of SCS setup */
167 #define WPA_EVENT_SCS_RESULT "CTRL-EVENT-SCS-RESULT "
168 /* Event indicating DSCP policy */
169 #define WPA_EVENT_DSCP_POLICY "CTRL-EVENT-DSCP-POLICY "
170 
171 /* WPS ER events */
172 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
173 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
174 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
175 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
176 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
177 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
178 
179 /* DPP events */
180 #define DPP_EVENT_AUTH_SUCCESS "DPP-AUTH-SUCCESS "
181 #define DPP_EVENT_AUTH_INIT_FAILED "DPP-AUTH-INIT-FAILED "
182 #define DPP_EVENT_NOT_COMPATIBLE "DPP-NOT-COMPATIBLE "
183 #define DPP_EVENT_RESPONSE_PENDING "DPP-RESPONSE-PENDING "
184 #define DPP_EVENT_SCAN_PEER_QR_CODE "DPP-SCAN-PEER-QR-CODE "
185 #define DPP_EVENT_AUTH_DIRECTION "DPP-AUTH-DIRECTION "
186 #define DPP_EVENT_CONF_RECEIVED "DPP-CONF-RECEIVED "
187 #define DPP_EVENT_CONF_SENT "DPP-CONF-SENT "
188 #define DPP_EVENT_CONF_FAILED "DPP-CONF-FAILED "
189 #define DPP_EVENT_CONN_STATUS_RESULT "DPP-CONN-STATUS-RESULT "
190 #define DPP_EVENT_CONFOBJ_AKM "DPP-CONFOBJ-AKM "
191 #define DPP_EVENT_CONFOBJ_SSID "DPP-CONFOBJ-SSID "
192 #define DPP_EVENT_CONFOBJ_SSID_CHARSET "DPP-CONFOBJ-SSID-CHARSET "
193 #define DPP_EVENT_CONFOBJ_PASS "DPP-CONFOBJ-PASS "
194 #define DPP_EVENT_CONFOBJ_PSK "DPP-CONFOBJ-PSK "
195 #define DPP_EVENT_CONNECTOR "DPP-CONNECTOR "
196 #define DPP_EVENT_C_SIGN_KEY "DPP-C-SIGN-KEY "
197 #define DPP_EVENT_PP_KEY "DPP-PP-KEY "
198 #define DPP_EVENT_NET_ACCESS_KEY "DPP-NET-ACCESS-KEY "
199 #define DPP_EVENT_SERVER_NAME "DPP-SERVER-NAME "
200 #define DPP_EVENT_CERTBAG "DPP-CERTBAG "
201 #define DPP_EVENT_CACERT "DPP-CACERT "
202 #define DPP_EVENT_MISSING_CONNECTOR "DPP-MISSING-CONNECTOR "
203 #define DPP_EVENT_NETWORK_ID "DPP-NETWORK-ID "
204 #define DPP_EVENT_CONFIGURATOR_ID "DPP-CONFIGURATOR-ID "
205 #define DPP_EVENT_RX "DPP-RX "
206 #define DPP_EVENT_TX "DPP-TX "
207 #define DPP_EVENT_TX_STATUS "DPP-TX-STATUS "
208 #define DPP_EVENT_FAIL "DPP-FAIL "
209 #define DPP_EVENT_PKEX_T_LIMIT "DPP-PKEX-T-LIMIT "
210 #define DPP_EVENT_INTRO "DPP-INTRO "
211 #define DPP_EVENT_CONF_REQ_RX "DPP-CONF-REQ-RX "
212 #define DPP_EVENT_CHIRP_STOPPED "DPP-CHIRP-STOPPED "
213 #define DPP_EVENT_MUD_URL "DPP-MUD-URL "
214 #define DPP_EVENT_BAND_SUPPORT "DPP-BAND-SUPPORT "
215 #define DPP_EVENT_CSR "DPP-CSR "
216 #define DPP_EVENT_CHIRP_RX "DPP-CHIRP-RX "
217 #define DPP_EVENT_CONF_NEEDED "DPP-CONF-NEEDED "
218 
219 /* MESH events */
220 #define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
221 #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
222 #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
223 #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
224 /** Mesh SAE authentication failure. Wrong password suspected. */
225 #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
226 #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
227 
228 /* WMM AC events */
229 #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
230 #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
231 #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
232 
233 /** P2P device found */
234 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
235 
236 /** P2P device lost */
237 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
238 
239 /** A P2P device requested GO negotiation, but we were not ready to start the
240  * negotiation */
241 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
242 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
243 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
244 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
245 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
246 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
247 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
248 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
249 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
250 /* parameters: <peer address> <PIN> */
251 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
252 /* parameters: <peer address> */
253 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
254 /* parameters: <peer address> */
255 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
256 /* parameters: <peer address> */
257 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
258 /* parameters: <peer address> <status> */
259 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
260 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
261 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
262 /* parameters: <src addr> <update indicator> <TLVs> */
263 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
264 #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
265 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
266 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
267 #define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED "
268 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
269 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
270 #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
271 #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
272 #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
273 #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
274 #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
275 #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
276 
277 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
278 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
279 #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
280 
281 #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
282 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
283 
284 #define INTERWORKING_AP "INTERWORKING-AP "
285 #define INTERWORKING_EXCLUDED "INTERWORKING-BLACKLISTED "
286 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
287 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
288 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
289 
290 /* Credential block added; parameters: <id> */
291 #define CRED_ADDED "CRED-ADDED "
292 /* Credential block modified; parameters: <id> <field> */
293 #define CRED_MODIFIED "CRED-MODIFIED "
294 /* Credential block removed; parameters: <id> */
295 #define CRED_REMOVED "CRED-REMOVED "
296 
297 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
298 /* parameters: <addr> <dialog_token> <freq> */
299 #define GAS_QUERY_START "GAS-QUERY-START "
300 /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
301 #define GAS_QUERY_DONE "GAS-QUERY-DONE "
302 
303 /* parameters: <addr> <result> */
304 #define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
305 
306 #define RX_ANQP "RX-ANQP "
307 #define RX_HS20_ANQP "RX-HS20-ANQP "
308 #define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON "
309 #define RX_HS20_ICON "RX-HS20-ICON "
310 #define RX_MBO_ANQP "RX-MBO-ANQP "
311 
312 /* parameters: <Venue Number> <Venue URL> */
313 #define RX_VENUE_URL "RX-VENUE-URL "
314 
315 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
316 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
317 #define HS20_T_C_ACCEPTANCE "HS20-T-C-ACCEPTANCE "
318 
319 #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
320 #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
321 
322 #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
323 #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
324 
325 /* hostapd control interface - fixed message prefixes */
326 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
327 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
328 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
329 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
330 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
331 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
332 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
333 #define WPS_EVENT_PIN_ACTIVE "WPS-PIN-ACTIVE "
334 #define WPS_EVENT_CANCEL "WPS-CANCEL "
335 #define AP_STA_CONNECTED "AP-STA-CONNECTED "
336 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
337 #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
338 #define AP_STA_POLL_OK "AP-STA-POLL-OK "
339 
340 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
341 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
342 
343 #define HS20_T_C_FILTERING_ADD "HS20-T-C-FILTERING-ADD "
344 #define HS20_T_C_FILTERING_REMOVE "HS20-T-C-FILTERING-REMOVE "
345 
346 #define AP_EVENT_ENABLED "AP-ENABLED "
347 #define AP_EVENT_DISABLED "AP-DISABLED "
348 
349 #define INTERFACE_ENABLED "INTERFACE-ENABLED "
350 #define INTERFACE_DISABLED "INTERFACE-DISABLED "
351 
352 #define ACS_EVENT_STARTED "ACS-STARTED "
353 #define ACS_EVENT_COMPLETED "ACS-COMPLETED "
354 #define ACS_EVENT_FAILED "ACS-FAILED "
355 
356 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
357 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
358 #define DFS_EVENT_CAC_START "DFS-CAC-START "
359 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
360 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
361 #define DFS_EVENT_PRE_CAC_EXPIRED "DFS-PRE-CAC-EXPIRED "
362 
363 #define AP_CSA_FINISHED "AP-CSA-FINISHED "
364 
365 #define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED "
366 #define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON "
367 
368 /* BSS Transition Management Response frame received */
369 #define BSS_TM_RESP "BSS-TM-RESP "
370 
371 /* Collocated Interference Request frame received;
372  * parameters: <dialog token> <automatic report enabled> <report timeout> */
373 #define COLOC_INTF_REQ "COLOC-INTF-REQ "
374 /* Collocated Interference Report frame received;
375  * parameters: <STA address> <dialog token> <hexdump of report elements> */
376 #define COLOC_INTF_REPORT "COLOC-INTF-REPORT "
377 
378 /* MBO IE with cellular data connection preference received */
379 #define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE "
380 
381 /* BSS Transition Management Request received with MBO transition reason */
382 #define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON "
383 
384 /* parameters: <STA address> <dialog token> <ack=0/1> */
385 #define BEACON_REQ_TX_STATUS "BEACON-REQ-TX-STATUS "
386 /* parameters: <STA address> <dialog token> <report mode> <beacon report> */
387 #define BEACON_RESP_RX "BEACON-RESP-RX "
388 
389 /* PMKSA cache entry added; parameters: <BSSID> <network_id> */
390 #define PMKSA_CACHE_ADDED "PMKSA-CACHE-ADDED "
391 /* PMKSA cache entry removed; parameters: <BSSID> <network_id> */
392 #define PMKSA_CACHE_REMOVED "PMKSA-CACHE-REMOVED "
393 
394 /* FILS HLP Container receive; parameters: dst=<addr> src=<addr> frame=<hexdump>
395  */
396 #define FILS_HLP_RX "FILS-HLP-RX "
397 
398 /* Event to indicate Probe Request frame;
399  * parameters: sa=<STA MAC address> signal=<signal> */
400 #define RX_PROBE_REQUEST "RX-PROBE-REQUEST "
401 
402 /* Event to indicate station's HT/VHT operation mode change information */
403 #define STA_OPMODE_MAX_BW_CHANGED "STA-OPMODE-MAX-BW-CHANGED "
404 #define STA_OPMODE_SMPS_MODE_CHANGED "STA-OPMODE-SMPS-MODE-CHANGED "
405 #define STA_OPMODE_N_SS_CHANGED "STA-OPMODE-N_SS-CHANGED "
406 
407 /* New interface addition or removal for 4addr WDS SDA */
408 #define WDS_STA_INTERFACE_ADDED "WDS-STA-INTERFACE-ADDED "
409 #define WDS_STA_INTERFACE_REMOVED "WDS-STA-INTERFACE-REMOVED "
410 
411 /* Transition mode disabled indication - followed by bitmap */
412 #define TRANSITION_DISABLE "TRANSITION-DISABLE "
413 
414 /* OCV validation failure; parameters: addr=<src addr>
415  * frame=<saqueryreq/saqueryresp> error=<error string> */
416 #define OCV_FAILURE "OCV-FAILURE "
417 
418 /* Event triggered for received management frame */
419 #define AP_MGMT_FRAME_RECEIVED "AP-MGMT-FRAME-RECEIVED "
420 
421 #ifndef BIT
422 #define BIT(x) (1U << (x))
423 #endif
424 
425 /* PASN authentication status */
426 #define PASN_AUTH_STATUS "PASN-AUTH-STATUS "
427 
428 /* BSS command information masks */
429 
430 #define WPA_BSS_MASK_ALL		0xFFFDFFFF
431 #define WPA_BSS_MASK_ID			BIT(0)
432 #define WPA_BSS_MASK_BSSID		BIT(1)
433 #define WPA_BSS_MASK_FREQ		BIT(2)
434 #define WPA_BSS_MASK_BEACON_INT		BIT(3)
435 #define WPA_BSS_MASK_CAPABILITIES	BIT(4)
436 #define WPA_BSS_MASK_QUAL		BIT(5)
437 #define WPA_BSS_MASK_NOISE		BIT(6)
438 #define WPA_BSS_MASK_LEVEL		BIT(7)
439 #define WPA_BSS_MASK_TSF		BIT(8)
440 #define WPA_BSS_MASK_AGE		BIT(9)
441 #define WPA_BSS_MASK_IE			BIT(10)
442 #define WPA_BSS_MASK_FLAGS		BIT(11)
443 #define WPA_BSS_MASK_SSID		BIT(12)
444 #define WPA_BSS_MASK_WPS_SCAN		BIT(13)
445 #define WPA_BSS_MASK_P2P_SCAN		BIT(14)
446 #define WPA_BSS_MASK_INTERNETW		BIT(15)
447 #define WPA_BSS_MASK_WIFI_DISPLAY	BIT(16)
448 #define WPA_BSS_MASK_DELIM		BIT(17)
449 #define WPA_BSS_MASK_MESH_SCAN		BIT(18)
450 #define WPA_BSS_MASK_SNR		BIT(19)
451 #define WPA_BSS_MASK_EST_THROUGHPUT	BIT(20)
452 #define WPA_BSS_MASK_FST		BIT(21)
453 #define WPA_BSS_MASK_UPDATE_IDX		BIT(22)
454 #define WPA_BSS_MASK_BEACON_IE		BIT(23)
455 #define WPA_BSS_MASK_FILS_INDICATION	BIT(24)
456 
457 
458 /* VENDOR_ELEM_* frame id values */
459 enum wpa_vendor_elem_frame {
460 	VENDOR_ELEM_PROBE_REQ_P2P = 0,
461 	VENDOR_ELEM_PROBE_RESP_P2P = 1,
462 	VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
463 	VENDOR_ELEM_BEACON_P2P_GO = 3,
464 	VENDOR_ELEM_P2P_PD_REQ = 4,
465 	VENDOR_ELEM_P2P_PD_RESP = 5,
466 	VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
467 	VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
468 	VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
469 	VENDOR_ELEM_P2P_INV_REQ = 9,
470 	VENDOR_ELEM_P2P_INV_RESP = 10,
471 	VENDOR_ELEM_P2P_ASSOC_REQ = 11,
472 	VENDOR_ELEM_P2P_ASSOC_RESP = 12,
473 	VENDOR_ELEM_ASSOC_REQ = 13,
474 	VENDOR_ELEM_PROBE_REQ = 14,
475 	NUM_VENDOR_ELEM_FRAMES
476 };
477 
478 
479 /* wpa_supplicant/hostapd control interface access */
480 
481 #ifdef CONFIG_CTRL_IFACE_ZEPHYR
482 /**
483  * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
484  * @sock: one of the pair of UNIX domain socket (socketpair)
485  * Returns: Pointer to abstract control interface data or %NULL on failure
486  *
487  * This function is used to open a control interface to wpa_supplicant/hostapd
488  * using a connected socketpair.
489  */
490 struct wpa_ctrl * wpa_ctrl_open(const int sock);
491 #else
492 /**
493  * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
494  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
495  * Returns: Pointer to abstract control interface data or %NULL on failure
496  *
497  * This function is used to open a control interface to wpa_supplicant/hostapd.
498  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
499  * is configured in wpa_supplicant/hostapd and other programs using the control
500  * interface need to use matching path configuration.
501  */
502 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
503 #endif
504 
505 /**
506  * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
507  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
508  * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
509  *            is used.
510  * Returns: Pointer to abstract control interface data or %NULL on failure
511  *
512  * This function is used to open a control interface to wpa_supplicant/hostapd
513  * when the socket path for client need to be specified explicitly. Default
514  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
515  * socket path is /tmp.
516  */
517 struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
518 
519 
520 /**
521  * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
522  * @ctrl: Control interface data from wpa_ctrl_open()
523  *
524  * This function is used to close a control interface.
525  */
526 void wpa_ctrl_close(struct wpa_ctrl *ctrl);
527 
528 
529 /**
530  * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
531  * @ctrl: Control interface data from wpa_ctrl_open()
532  * @cmd: Command; usually, ASCII text, e.g., "PING"
533  * @cmd_len: Length of the cmd in bytes
534  * @reply: Buffer for the response
535  * @reply_len: Reply buffer length
536  * @msg_cb: Callback function for unsolicited messages or %NULL if not used
537  * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
538  *
539  * This function is used to send commands to wpa_supplicant/hostapd. Received
540  * response will be written to reply and reply_len is set to the actual length
541  * of the reply. This function will block for up to 10 seconds while waiting
542  * for the reply. If unsolicited messages are received, the blocking time may
543  * be longer.
544  *
545  * msg_cb can be used to register a callback function that will be called for
546  * unsolicited messages received while waiting for the command response. These
547  * messages may be received if wpa_ctrl_request() is called at the same time as
548  * wpa_supplicant/hostapd is sending such a message. This can happen only if
549  * the program has used wpa_ctrl_attach() to register itself as a monitor for
550  * event messages. Alternatively to msg_cb, programs can register two control
551  * interface connections and use one of them for commands and the other one for
552  * receiving event messages, in other words, call wpa_ctrl_attach() only for
553  * the control interface connection that will be used for event messages.
554  */
555 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
556 		     char *reply, size_t *reply_len,
557 		     void (*msg_cb)(char *msg, size_t len));
558 
559 
560 /**
561  * wpa_ctrl_attach - Register as an event monitor for the control interface
562  * @ctrl: Control interface data from wpa_ctrl_open()
563  * Returns: 0 on success, -1 on failure, -2 on timeout
564  *
565  * This function registers the control interface connection as a monitor for
566  * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
567  * control interface connection starts receiving event messages that can be
568  * read with wpa_ctrl_recv().
569  */
570 int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
571 
572 
573 /**
574  * wpa_ctrl_detach - Unregister event monitor from the control interface
575  * @ctrl: Control interface data from wpa_ctrl_open()
576  * Returns: 0 on success, -1 on failure, -2 on timeout
577  *
578  * This function unregisters the control interface connection as a monitor for
579  * wpa_supplicant/hostapd events, i.e., cancels the registration done with
580  * wpa_ctrl_attach().
581  */
582 int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
583 
584 
585 /**
586  * wpa_ctrl_recv - Receive a pending control interface message
587  * @ctrl: Control interface data from wpa_ctrl_open()
588  * @reply: Buffer for the message data
589  * @reply_len: Length of the reply buffer
590  * Returns: 0 on success, -1 on failure
591  *
592  * This function will receive a pending control interface message. The received
593  * response will be written to reply and reply_len is set to the actual length
594  * of the reply.
595 
596  * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
597  * must have been used to register the control interface as an event monitor.
598  */
599 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
600 
601 
602 /**
603  * wpa_ctrl_pending - Check whether there are pending event messages
604  * @ctrl: Control interface data from wpa_ctrl_open()
605  * Returns: 1 if there are pending messages, 0 if no, or -1 on error
606  *
607  * This function will check whether there are any pending control interface
608  * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
609  * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
610  * register the control interface as an event monitor.
611  */
612 int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
613 
614 
615 /**
616  * wpa_ctrl_get_fd - Get file descriptor used by the control interface
617  * @ctrl: Control interface data from wpa_ctrl_open()
618  * Returns: File descriptor used for the connection
619  *
620  * This function can be used to get the file descriptor that is used for the
621  * control interface connection. The returned value can be used, e.g., with
622  * select() while waiting for multiple events.
623  *
624  * The returned file descriptor must not be used directly for sending or
625  * receiving packets; instead, the library functions wpa_ctrl_request() and
626  * wpa_ctrl_recv() must be used for this.
627  */
628 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
629 
630 #ifdef ANDROID
631 /**
632  * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
633  * may be left over from clients that were previously connected to
634  * wpa_supplicant. This keeps these files from being orphaned in the
635  * event of crashes that prevented them from being removed as part
636  * of the normal orderly shutdown.
637  */
638 void wpa_ctrl_cleanup(void);
639 #endif /* ANDROID */
640 
641 #ifdef CONFIG_CTRL_IFACE_UDP
642 /* Port range for multiple wpa_supplicant instances and multiple VIFs */
643 #define WPA_CTRL_IFACE_PORT 9877
644 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
645 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878
646 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
647 
648 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
649 #endif /* CONFIG_CTRL_IFACE_UDP */
650 
651 int wpa_ctrl_command(struct wpa_ctrl *ctrl, const char *cmd);
652 int wpa_ctrl_command_interactive(struct wpa_ctrl *ctrl, const char *cmd);
653 int wpa_request(struct wpa_ctrl *ctrl, int argc, char *argv[]);
654 
655 #ifdef  __cplusplus
656 }
657 #endif
658 
659 #endif /* WPA_CTRL_H */
660