1 /*$Id: //dwh/bluetooth/DWC_ble154combo/firmware/rel/1.21a-SOW07PatchV4/firmware/shrd_utils/inc/ll_fw_config.h#1 $*/ 2 /** 3 ******************************************************************************** 4 * @file ll_fw_config.h 5 * @brief This file contains the major configurations to the BLE controller. 6 ****************************************************************************** 7 * @copy 8 * This Synopsys DWC Bluetooth Low Energy Combo Link Layer/MAC software and 9 * associated documentation ( hereinafter the "Software") is an unsupported 10 * proprietary work of Synopsys, Inc. unless otherwise expressly agreed to in 11 * writing between Synopsys and you. The Software IS NOT an item of Licensed 12 * Software or a Licensed Product under any End User Software License Agreement 13 * or Agreement for Licensed Products with Synopsys or any supplement thereto. 14 * Synopsys is a registered trademark of Synopsys, Inc. Other names included in 15 * the SOFTWARE may be the trademarks of their respective owners. 16 * 17 * Synopsys MIT License: 18 * Copyright (c) 2020-Present Synopsys, Inc 19 * 20 * Permission is hereby granted, free of charge, to any person obtaining a copy of 21 * the Software), to deal in the Software without restriction, including without 22 * limitation the rights to use, copy, modify, merge, publish, distribute, 23 * sublicense, and/or sell copies of the Software, and to permit persons to whom 24 * the Software is furnished to do so, subject to the following conditions: 25 * 26 * The above copyright notice and this permission notice shall be included in all 27 * copies or substantial portions of the Software. 28 * 29 * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 30 * IMPLIED, INCLUDING, BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 31 * FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT. IN NO EVENT SHALL THE 32 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 33 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT, OR OTHERWISE ARISING FROM, 34 * OUT OF, OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 35 * 36 * */ 37 #ifndef INCLUDE_LL_FW_CONFIG_H 38 #define INCLUDE_LL_FW_CONFIG_H 39 40 41 /*************************** BLE Configuration *************************************/ 42 /*Configurations of BLE will apply only when BLE is enabled*/ 43 /* Roles configurations */ 44 #define SUPPORT_EXPLCT_OBSERVER_ROLE 1 /* Enable\Disable Explicit observer role. Enable:1 - Disable:0 */ 45 #define SUPPORT_EXPLCT_BROADCASTER_ROLE 1 /* Enable\Disable Explicit broadcaster role. Enable:1 - Disable:0 */ 46 #define SUPPORT_MASTER_CONNECTION 1 /* Enable\Disable Master connection role. Enable:1 - Disable:0 */ 47 #define SUPPORT_SLAVE_CONNECTION 1 /* Enable\Disable Slave connection role. Enable:1 - Disable:0 */ 48 49 /* Standard features configurations */ 50 #define SUPPORT_LE_ENCRYPTION 1 /* Enable\Disable Encryption feature. Enable:1 - Disable:0 */ 51 #define SUPPORT_PRIVACY 1 /* Enable\Disable Privacy feature. Enable:1 - Disable:0 */ 52 53 /* Capabilities configurations */ 54 #define MAX_NUM_CNCRT_STAT_MCHNS 8 /* Set maximum number of states the controller can support */ 55 #define USE_NON_ACCURATE_32K_SLEEP_CLK 1 /* Allow to drive the sleep clock by sources other than the default crystal oscillator source.*/ 56 /*LL can use crystal oscillator or RTC or RCO to drive the sleep clock.This selection is done via "DEFAULT_SLEEP_CLOCK_SOURCE" macro. */ 57 #define SUPPORT_LE_EXTENDED_ADVERTISING 1 /* Enable\Disable Extended advertising feature. Enable:1 - Disable:0 */ 58 #define SUPPORT_LE_PERIODIC_ADVERTISING 1 /* Enable\Disable Periodic advertising feature. Enable:1 - Disable:0 */ 59 #define SUPPORT_LE_POWER_CLASS_1 1 /* Enable\Disable Low power class 1 feature. Enable:1 - Disable:0 */ 60 #define SUPPORT_AOA_AOD 1 /* Enable\Disable AOA_AOD feature. Enable:1 - Disable:0 */ 61 #define SUPPORT_PERIODIC_SYNC_TRANSFER 1 /* Enable\Disable PAST feature. Enable:1 - Disable:0 */ 62 #define SUPPORT_SLEEP_CLOCK_ACCURCY_UPDATES 1 /* Enable\Disable Sleep Clock Accuracy Updates Feature. Enable:1 - Disable:0 */ 63 #define SUPPORT_CONNECTED_ISOCHRONOUS 1 /* Enable\Disable Connected Isochronous Channel Feature. Enable:1 - Disable:0 */ 64 #define SUPPORT_BRD_ISOCHRONOUS 1 /* Enable\Disable Broadcast Isochronous Channel Feature. Enable:1 - Disable:0 */ 65 #define SUPPORT_SYNC_ISOCHRONOUS 1 /* Enable\Disable Broadcast Isochronous Synchronizer Channel Feature. Enable:1 - Disable:0 */ 66 #define SUPPORT_LE_POWER_CONTROL 1 /* Enable\Disable LE Power Control Feature. Enable:1 - Disable:0 */ 67 68 /* 5.3 features */ 69 #define SUPPORT_PERIODIC_ADV_ADI 1 70 #define SUPPORT_CHANNEL_CLASSIFICATION 1 71 #define SUPPORT_LE_ENHANCED_CONN_UPDATE 1 72 73 74 #define SUPPORT_CSSA 1 /* Enable\Disable Coding Selection Scheme on Advertising Feature. Enable:1 - Disable:0 */ 75 #define SUPPORT_LE_PAWR_ADVERTISER_ROLE 0 /* Enable\Disable PAwR Advertiser role. Enable:1 - Disable:0 */ 76 #define SUPPORT_LE_PAWR_SYNC_ROLE 0 /* Enable\Disable PAwR Synchronizer role. Enable:1 - Disable:0 */ 77 78 /* Non-standard features configurations */ 79 #define NUM_OF_CTSM_EMNGR_HNDLS 1 /* Number of custom handles in event manager to be used for app specific needs */ 80 #define SUPPORT_AUGMENTED_BLE_MODE 1 /* Enable\Disable Augmented BLE Support. Enable:1 - Disable:0 */ 81 #define SUPPORT_PTA 1 /* Enable\Disable PTA Feature. Enable:1 - Disable:0 */ 82 83 #define CHECK_ANY_MISSED_EVENT_ON_DEEP_SLEEP_EXIT 1 /* Enable\Disable calling event scheduler handler function at the end of deep sleep exit*/ 84 85 #define SUPPORT_AUTONOMOUS_POWER_CONTROL_REQ 1 86 #define LL_BASIC 0 87 88 /*************************** MAC Configuration *************************************/ 89 /*Configurations of MAC will apply only when MAC is enabled*/ 90 #define FFD_DEVICE_CONFIG 0 /* Enable\Disable FFD:1 - RFD:0 */ 91 #ifdef SUPPORT_AUG_MAC_HCI_UART 92 #define RAL_NUMBER_OF_INSTANCE 0 /* The Number of RAL instances supported */ 93 #else 94 #define RAL_NUMBER_OF_INSTANCE 0 /* The Number of RAL instances supported */ 95 #endif 96 #define MAX_NUMBER_OF_INDIRECT_DATA 0 /* The maximum number of supported indirect data buffers */ 97 #define SUPPORT_OPENTHREAD_1_2 0 /* Enable / disable FW parts related to new features introduced in openthread 1.2*/ 98 #define SUPPORT_SEC 0 /* The MAC Security Supported : 1 - Not Supported:0 */ 99 #define RADIO_CSMA 0 /* Enable\Disable CSMA Algorithm in Radio Layer, Must be Enabled if MAC_LAYER_BUILD */ 100 #define SUPPORT_A_MAC 0 101 #define SMPL_PRTCL_TEST_ENABLE 0 102 103 #endif /* INCLUDE_LL_FW_CONFIG_H */ 104
