1 /***************************************************************************//** 2 * @file 3 * @brief Sleep Timer configuration file. 4 ******************************************************************************* 5 * # License 6 * <b>Copyright 2020 Silicon Laboratories Inc. www.silabs.com</b> 7 ******************************************************************************* 8 * 9 * SPDX-License-Identifier: Zlib 10 * 11 * The licensor of this software is Silicon Laboratories Inc. 12 * 13 * This software is provided 'as-is', without any express or implied 14 * warranty. In no event will the authors be held liable for any damages 15 * arising from the use of this software. 16 * 17 * Permission is granted to anyone to use this software for any purpose, 18 * including commercial applications, and to alter it and redistribute it 19 * freely, subject to the following restrictions: 20 * 21 * 1. The origin of this software must not be misrepresented; you must not 22 * claim that you wrote the original software. If you use this software 23 * in a product, an acknowledgment in the product documentation would be 24 * appreciated but is not required. 25 * 2. Altered source versions must be plainly marked as such, and must not be 26 * misrepresented as being the original software. 27 * 3. This notice may not be removed or altered from any source distribution. 28 * 29 ******************************************************************************/ 30 31 // <<< Use Configuration Wizard in Context Menu >>> 32 33 #ifndef SL_SLEEPTIMER_CONFIG_H 34 #define SL_SLEEPTIMER_CONFIG_H 35 36 #define SL_SLEEPTIMER_PERIPHERAL_DEFAULT 0 37 #define SL_SLEEPTIMER_PERIPHERAL_RTCC 1 38 #define SL_SLEEPTIMER_PERIPHERAL_PRORTC 2 39 #define SL_SLEEPTIMER_PERIPHERAL_RTC 3 40 #define SL_SLEEPTIMER_PERIPHERAL_SYSRTC 4 41 #define SL_SLEEPTIMER_PERIPHERAL_BURTC 5 42 #define SL_SLEEPTIMER_PERIPHERAL_WTIMER 6 43 #define SL_SLEEPTIMER_PERIPHERAL_TIMER 7 44 45 // <o SL_SLEEPTIMER_PERIPHERAL> Timer Peripheral Used by Sleeptimer 46 // <SL_SLEEPTIMER_PERIPHERAL_DEFAULT=> Default (auto select) 47 // <SL_SLEEPTIMER_PERIPHERAL_RTCC=> RTCC 48 // <SL_SLEEPTIMER_PERIPHERAL_PRORTC=> Radio internal RTC (PRORTC) 49 // <SL_SLEEPTIMER_PERIPHERAL_RTC=> RTC 50 // <SL_SLEEPTIMER_PERIPHERAL_SYSRTC=> SYSRTC 51 // <SL_SLEEPTIMER_PERIPHERAL_BURTC=> Back-Up RTC (BURTC) 52 // <SL_SLEEPTIMER_PERIPHERAL_WTIMER=> WTIMER 53 // <SL_SLEEPTIMER_PERIPHERAL_TIMER=> TIMER 54 // <i> Selection of the Timer Peripheral Used by the Sleeptimer 55 #define SL_SLEEPTIMER_PERIPHERAL SL_SLEEPTIMER_PERIPHERAL_DEFAULT 56 57 // <o SL_SLEEPTIMER_TIMER_INSTANCE> TIMER/WTIMER Instance Used by Sleeptimer (not applicable for other peripherals) 58 // <i> Make sure TIMER instance size is 32bits. Check datasheet for 32bits TIMERs. 59 // <i> Default: 0 60 #define SL_SLEEPTIMER_TIMER_INSTANCE 0 61 62 // <q SL_SLEEPTIMER_WALLCLOCK_CONFIG> Enable wallclock functionality 63 // <i> Enable or disable wallclock functionalities (get_time, get_date, etc). 64 // <i> Default: 0 65 #define SL_SLEEPTIMER_WALLCLOCK_CONFIG 0 66 67 // <o SL_SLEEPTIMER_FREQ_DIVIDER> Timer frequency divider (not applicable for WTIMER/TIMER) 68 // <i> WTIMER/TIMER peripherals are always prescaled to 1024. 69 // <i> Default: 1 70 #define SL_SLEEPTIMER_FREQ_DIVIDER 1 71 72 // <q SL_SLEEPTIMER_PRORTC_HAL_OWNS_IRQ_HANDLER> If Radio internal RTC (PRORTC) HAL is used, determines if it owns the IRQ handler. Enable, if no wireless stack is used. 73 // <i> Default: 0 74 #define SL_SLEEPTIMER_PRORTC_HAL_OWNS_IRQ_HANDLER 0 75 76 // <q SL_SLEEPTIMER_DEBUGRUN> Enable DEBUGRUN functionality on hardware RTC. 77 // <i> Default: 0 78 #define SL_SLEEPTIMER_DEBUGRUN 0 79 80 #endif /* SLEEPTIMER_CONFIG_H */ 81 82 // <<< end of configuration section >>> 83
