1 /* 2 * Copyright (c) 2019 - 2020, Nordic Semiconductor ASA 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright notice, this 9 * list of conditions and the following disclaimer. 10 * 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * 3. Neither the name of the copyright holder nor the names of its 16 * contributors may be used to endorse or promote products derived from this 17 * software without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 #ifndef NRFX_CONFIG_NRF5340_APPLICATION_H__ 33 #define NRFX_CONFIG_NRF5340_APPLICATION_H__ 34 35 #ifndef NRFX_CONFIG_H__ 36 #error "This file should not be included directly. Include nrfx_config.h instead." 37 #endif 38 39 #define NRF_CLOCK NRF_PERIPH(NRF_CLOCK) 40 #define NRF_COMP NRF_PERIPH(NRF_COMP) 41 #define NRF_CTRLAP NRF_PERIPH(NRF_CTRLAP) 42 #define NRF_DCNF NRF_PERIPH(NRF_DCNF) 43 #define NRF_DPPIC NRF_PERIPH(NRF_DPPIC) 44 #define NRF_EGU0 NRF_PERIPH(NRF_EGU0) 45 #define NRF_EGU1 NRF_PERIPH(NRF_EGU1) 46 #define NRF_EGU2 NRF_PERIPH(NRF_EGU2) 47 #define NRF_EGU3 NRF_PERIPH(NRF_EGU3) 48 #define NRF_EGU4 NRF_PERIPH(NRF_EGU4) 49 #define NRF_EGU5 NRF_PERIPH(NRF_EGU5) 50 #define NRF_FPU NRF_PERIPH(NRF_FPU) 51 #define NRF_I2S0 NRF_PERIPH(NRF_I2S0) 52 #define NRF_IPC NRF_PERIPH(NRF_IPC) 53 #define NRF_KMU NRF_PERIPH(NRF_KMU) 54 #define NRF_LPCOMP NRF_PERIPH(NRF_LPCOMP) 55 #define NRF_MUTEX NRF_PERIPH(NRF_MUTEX) 56 #define NRF_NFCT NRF_PERIPH(NRF_NFCT) 57 #define NRF_NVMC NRF_PERIPH(NRF_NVMC) 58 #define NRF_OSCILLATORS NRF_PERIPH(NRF_OSCILLATORS) 59 #define NRF_P0 NRF_PERIPH(NRF_P0) 60 #define NRF_P1 NRF_PERIPH(NRF_P1) 61 #define NRF_PDM0 NRF_PERIPH(NRF_PDM0) 62 #define NRF_POWER NRF_PERIPH(NRF_POWER) 63 #define NRF_PWM0 NRF_PERIPH(NRF_PWM0) 64 #define NRF_PWM1 NRF_PERIPH(NRF_PWM1) 65 #define NRF_PWM2 NRF_PERIPH(NRF_PWM2) 66 #define NRF_PWM3 NRF_PERIPH(NRF_PWM3) 67 #define NRF_QDEC0 NRF_PERIPH(NRF_QDEC0) 68 #define NRF_QDEC1 NRF_PERIPH(NRF_QDEC1) 69 #define NRF_QSPI NRF_PERIPH(NRF_QSPI) 70 #define NRF_REGULATORS NRF_PERIPH(NRF_REGULATORS) 71 #define NRF_RESET NRF_PERIPH(NRF_RESET) 72 #define NRF_RTC0 NRF_PERIPH(NRF_RTC0) 73 #define NRF_RTC1 NRF_PERIPH(NRF_RTC1) 74 #define NRF_SAADC NRF_PERIPH(NRF_SAADC) 75 #define NRF_SPIM0 NRF_PERIPH(NRF_SPIM0) 76 #define NRF_SPIM1 NRF_PERIPH(NRF_SPIM1) 77 #define NRF_SPIM2 NRF_PERIPH(NRF_SPIM2) 78 #define NRF_SPIM3 NRF_PERIPH(NRF_SPIM3) 79 #define NRF_SPIM4 NRF_PERIPH(NRF_SPIM4) 80 #define NRF_SPIS0 NRF_PERIPH(NRF_SPIS0) 81 #define NRF_SPIS1 NRF_PERIPH(NRF_SPIS1) 82 #define NRF_SPIS2 NRF_PERIPH(NRF_SPIS2) 83 #define NRF_SPIS3 NRF_PERIPH(NRF_SPIS3) 84 #define NRF_TIMER0 NRF_PERIPH(NRF_TIMER0) 85 #define NRF_TIMER1 NRF_PERIPH(NRF_TIMER1) 86 #define NRF_TIMER2 NRF_PERIPH(NRF_TIMER2) 87 #define NRF_TWIM0 NRF_PERIPH(NRF_TWIM0) 88 #define NRF_TWIM1 NRF_PERIPH(NRF_TWIM1) 89 #define NRF_TWIM2 NRF_PERIPH(NRF_TWIM2) 90 #define NRF_TWIM3 NRF_PERIPH(NRF_TWIM3) 91 #define NRF_TWIS0 NRF_PERIPH(NRF_TWIS0) 92 #define NRF_TWIS1 NRF_PERIPH(NRF_TWIS1) 93 #define NRF_TWIS2 NRF_PERIPH(NRF_TWIS2) 94 #define NRF_TWIS3 NRF_PERIPH(NRF_TWIS3) 95 #define NRF_UARTE0 NRF_PERIPH(NRF_UARTE0) 96 #define NRF_UARTE1 NRF_PERIPH(NRF_UARTE1) 97 #define NRF_UARTE2 NRF_PERIPH(NRF_UARTE2) 98 #define NRF_UARTE3 NRF_PERIPH(NRF_UARTE3) 99 #define NRF_USBD NRF_PERIPH(NRF_USBD) 100 #define NRF_USBREGULATOR NRF_PERIPH(NRF_USBREGULATOR) 101 #define NRF_VMC NRF_PERIPH(NRF_VMC) 102 #define NRF_WDT0 NRF_PERIPH(NRF_WDT0) 103 #define NRF_WDT1 NRF_PERIPH(NRF_WDT1) 104 105 /* 106 * The following section provides the name translation for peripherals with 107 * only one type of access available. For these peripherals, you cannot choose 108 * between secure and non-secure mapping. 109 */ 110 #if defined(NRF_TRUSTZONE_NONSECURE) 111 #define NRF_GPIOTE1 NRF_GPIOTE1_NS 112 #else 113 #define NRF_CACHE NRF_CACHE_S 114 #define NRF_CACHEINFO NRF_CACHEINFO_S 115 #define NRF_CACHEDATA NRF_CACHEDATA_S 116 #define NRF_CRYPTOCELL NRF_CRYPTOCELL_S 117 #define NRF_CTI NRF_CTI_S 118 #define NRF_FICR NRF_FICR_S 119 #define NRF_GPIOTE0 NRF_GPIOTE0_S 120 #define NRF_SPU NRF_SPU_S 121 #define NRF_TAD NRF_TAD_S 122 #define NRF_UICR NRF_UICR_S 123 #endif 124 125 /* Fixup for the QDEC driver. */ 126 #define NRF_QDEC NRF_QDEC0 127 128 /* Fixup for the GPIOTE driver. */ 129 #if defined(NRF_TRUSTZONE_NONSECURE) 130 #define NRF_GPIOTE NRF_GPIOTE1 131 #else 132 #define NRF_GPIOTE NRF_GPIOTE0 133 #endif 134 135 136 // <<< Use Configuration Wizard in Context Menu >>>\n 137 138 // <h> nRF_Drivers 139 140 // <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver. 141 //========================================================== 142 #ifndef NRFX_CLOCK_ENABLED 143 #define NRFX_CLOCK_ENABLED 0 144 #endif 145 // <o> NRFX_CLOCK_CONFIG_LF_SRC - LF clock source. 146 147 // <0=> ULP 148 // <1=> RC 149 // <2=> XTAL 150 // <3=> Synth 151 152 #ifndef NRFX_CLOCK_CONFIG_LF_SRC 153 #define NRFX_CLOCK_CONFIG_LF_SRC 2 154 #endif 155 156 // <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED - Enables LF Clock Calibration Support 157 158 #ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 159 #define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0 160 #endif 161 162 // <q> NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED - Enables two-stage LFXO start procedure 163 164 // <i> If set to a non-zero value, LFRC will be started before LFXO and corresponding 165 // <i> event will be generated. It means that CPU will be woken up when LFRC 166 // <i> oscillator starts, but user callback will be invoked only after LFXO 167 // <i> finally starts. 168 169 #ifndef NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED 170 #define NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED 0 171 #endif 172 173 174 // <o> NRFX_CLOCK_CONFIG_HFCLK192M_SRC - HFCLK192M source. 175 176 // <0=> HFINT 177 // <1=> HFXO 178 179 #ifndef NRFX_CLOCK_CONFIG_HFCLK192M_SRC 180 #define NRFX_CLOCK_CONFIG_HFCLK192M_SRC 1 181 #endif 182 183 // <o> NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 184 185 // <0=> 0 (highest) 186 // <1=> 1 187 // <2=> 2 188 // <3=> 3 189 // <4=> 4 190 // <5=> 5 191 // <6=> 6 192 // <7=> 7 193 194 #ifndef NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY 195 #define NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY 7 196 #endif 197 198 // <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. 199 //========================================================== 200 #ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED 201 #define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 202 #endif 203 // <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default severity level. 204 205 // <0=> Off 206 // <1=> Error 207 // <2=> Warning 208 // <3=> Info 209 // <4=> Debug 210 211 #ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL 212 #define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 213 #endif 214 215 // <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. 216 217 // <0=> Default 218 // <1=> Black 219 // <2=> Red 220 // <3=> Green 221 // <4=> Yellow 222 // <5=> Blue 223 // <6=> Magenta 224 // <7=> Cyan 225 // <8=> White 226 227 #ifndef NRFX_CLOCK_CONFIG_INFO_COLOR 228 #define NRFX_CLOCK_CONFIG_INFO_COLOR 0 229 #endif 230 231 // <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 232 233 // <0=> Default 234 // <1=> Black 235 // <2=> Red 236 // <3=> Green 237 // <4=> Yellow 238 // <5=> Blue 239 // <6=> Magenta 240 // <7=> Cyan 241 // <8=> White 242 243 #ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR 244 #define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 245 #endif 246 247 // </e> 248 249 // </e> 250 251 // <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver 252 //========================================================== 253 #ifndef NRFX_COMP_ENABLED 254 #define NRFX_COMP_ENABLED 0 255 #endif 256 257 // <o> NRFX_COMP_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority 258 259 // <0=> 0 (highest) 260 // <1=> 1 261 // <2=> 2 262 // <3=> 3 263 // <4=> 4 264 // <5=> 5 265 // <6=> 6 266 // <7=> 7 267 268 #ifndef NRFX_COMP_DEFAULT_CONFIG_IRQ_PRIORITY 269 #define NRFX_COMP_DEFAULT_CONFIG_IRQ_PRIORITY 7 270 #endif 271 272 // <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module. 273 //========================================================== 274 #ifndef NRFX_COMP_CONFIG_LOG_ENABLED 275 #define NRFX_COMP_CONFIG_LOG_ENABLED 0 276 #endif 277 // <o> NRFX_COMP_CONFIG_LOG_LEVEL - Default Severity level 278 279 // <0=> Off 280 // <1=> Error 281 // <2=> Warning 282 // <3=> Info 283 // <4=> Debug 284 285 #ifndef NRFX_COMP_CONFIG_LOG_LEVEL 286 #define NRFX_COMP_CONFIG_LOG_LEVEL 3 287 #endif 288 289 // <o> NRFX_COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. 290 291 // <0=> Default 292 // <1=> Black 293 // <2=> Red 294 // <3=> Green 295 // <4=> Yellow 296 // <5=> Blue 297 // <6=> Magenta 298 // <7=> Cyan 299 // <8=> White 300 301 #ifndef NRFX_COMP_CONFIG_INFO_COLOR 302 #define NRFX_COMP_CONFIG_INFO_COLOR 0 303 #endif 304 305 // <o> NRFX_COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 306 307 // <0=> Default 308 // <1=> Black 309 // <2=> Red 310 // <3=> Green 311 // <4=> Yellow 312 // <5=> Blue 313 // <6=> Magenta 314 // <7=> Cyan 315 // <8=> White 316 317 #ifndef NRFX_COMP_CONFIG_DEBUG_COLOR 318 #define NRFX_COMP_CONFIG_DEBUG_COLOR 0 319 #endif 320 321 // </e> 322 323 // </e> 324 325 // <e> NRFX_DPPI_ENABLED - nrfx_dppi - DPPI allocator. 326 //========================================================== 327 #ifndef NRFX_DPPI_ENABLED 328 #define NRFX_DPPI_ENABLED 0 329 #endif 330 // <e> NRFX_DPPI_CONFIG_LOG_ENABLED - Enables logging in the module. 331 //========================================================== 332 #ifndef NRFX_DPPI_CONFIG_LOG_ENABLED 333 #define NRFX_DPPI_CONFIG_LOG_ENABLED 0 334 #endif 335 // <o> NRFX_DPPI_CONFIG_LOG_LEVEL - Default severity level. 336 337 // <0=> Off 338 // <1=> Error 339 // <2=> Warning 340 // <3=> Info 341 // <4=> Debug 342 343 #ifndef NRFX_DPPI_CONFIG_LOG_LEVEL 344 #define NRFX_DPPI_CONFIG_LOG_LEVEL 3 345 #endif 346 347 // <o> NRFX_DPPI_CONFIG_INFO_COLOR - ANSI escape code prefix. 348 349 // <0=> Default 350 // <1=> Black 351 // <2=> Red 352 // <3=> Green 353 // <4=> Yellow 354 // <5=> Blue 355 // <6=> Magenta 356 // <7=> Cyan 357 // <8=> White 358 359 #ifndef NRFX_DPPI_CONFIG_INFO_COLOR 360 #define NRFX_DPPI_CONFIG_INFO_COLOR 0 361 #endif 362 363 // <o> NRFX_DPPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 364 365 // <0=> Default 366 // <1=> Black 367 // <2=> Red 368 // <3=> Green 369 // <4=> Yellow 370 // <5=> Blue 371 // <6=> Magenta 372 // <7=> Cyan 373 // <8=> White 374 375 #ifndef NRFX_DPPI_CONFIG_DEBUG_COLOR 376 #define NRFX_DPPI_CONFIG_DEBUG_COLOR 0 377 #endif 378 379 // </e> 380 381 // </e> 382 383 // <e> NRFX_EGU_ENABLED - nrfx_egu - EGU peripheral driver. 384 //========================================================== 385 #ifndef NRFX_EGU_ENABLED 386 #define NRFX_EGU_ENABLED 0 387 #endif 388 389 // <q> NRFX_EGU0_ENABLED - Enable EGU0 instance. 390 391 #ifndef NRFX_EGU0_ENABLED 392 #define NRFX_EGU0_ENABLED 0 393 #endif 394 395 // <q> NRFX_EGU1_ENABLED - Enable EGU1 instance. 396 397 #ifndef NRFX_EGU1_ENABLED 398 #define NRFX_EGU1_ENABLED 0 399 #endif 400 401 // <q> NRFX_EGU2_ENABLED - Enable EGU2 instance. 402 403 #ifndef NRFX_EGU2_ENABLED 404 #define NRFX_EGU2_ENABLED 0 405 #endif 406 407 // <q> NRFX_EGU3_ENABLED - Enable EGU3 instance. 408 409 #ifndef NRFX_EGU3_ENABLED 410 #define NRFX_EGU3_ENABLED 0 411 #endif 412 413 // <q> NRFX_EGU4_ENABLED - Enable EGU4 instance. 414 415 #ifndef NRFX_EGU4_ENABLED 416 #define NRFX_EGU4_ENABLED 0 417 #endif 418 419 // <q> NRFX_EGU5_ENABLED - Enable EGU5 instance. 420 421 #ifndef NRFX_EGU5_ENABLED 422 #define NRFX_EGU5_ENABLED 0 423 #endif 424 425 // <o> NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 426 427 // <0=> 0 (highest) 428 // <1=> 1 429 // <2=> 2 430 // <3=> 3 431 // <4=> 4 432 // <5=> 5 433 // <6=> 6 434 // <7=> 7 435 436 #ifndef NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY 437 #define NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY 7 438 #endif 439 440 // </e> 441 442 // <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver. 443 //========================================================== 444 #ifndef NRFX_GPIOTE_ENABLED 445 #define NRFX_GPIOTE_ENABLED 0 446 #endif 447 // <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins. 448 #ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 449 #define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1 450 #endif 451 452 // <o> NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 453 454 // <0=> 0 (highest) 455 // <1=> 1 456 // <2=> 2 457 // <3=> 3 458 // <4=> 4 459 // <5=> 5 460 // <6=> 6 461 // <7=> 7 462 463 #ifndef NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY 464 #define NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 465 #endif 466 467 // <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. 468 //========================================================== 469 #ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED 470 #define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0 471 #endif 472 // <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default severity level. 473 474 // <0=> Off 475 // <1=> Error 476 // <2=> Warning 477 // <3=> Info 478 // <4=> Debug 479 480 #ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL 481 #define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3 482 #endif 483 484 // <o> NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. 485 486 // <0=> Default 487 // <1=> Black 488 // <2=> Red 489 // <3=> Green 490 // <4=> Yellow 491 // <5=> Blue 492 // <6=> Magenta 493 // <7=> Cyan 494 // <8=> White 495 496 #ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR 497 #define NRFX_GPIOTE_CONFIG_INFO_COLOR 0 498 #endif 499 500 // <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 501 502 // <0=> Default 503 // <1=> Black 504 // <2=> Red 505 // <3=> Green 506 // <4=> Yellow 507 // <5=> Blue 508 // <6=> Magenta 509 // <7=> Cyan 510 // <8=> White 511 512 #ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR 513 #define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0 514 #endif 515 516 // </e> 517 518 // </e> 519 520 // <e> NRFX_I2S_ENABLED - nrfx_i2s - I2S peripheral driver. 521 //========================================================== 522 #ifndef NRFX_I2S_ENABLED 523 #define NRFX_I2S_ENABLED 0 524 #endif 525 526 // <o> NRFX_I2S_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 527 528 // <0=> 0 (highest) 529 // <1=> 1 530 // <2=> 2 531 // <3=> 3 532 // <4=> 4 533 // <5=> 5 534 // <6=> 6 535 // <7=> 7 536 537 #ifndef NRFX_I2S_DEFAULT_CONFIG_IRQ_PRIORITY 538 #define NRFX_I2S_DEFAULT_CONFIG_IRQ_PRIORITY 7 539 #endif 540 541 // <e> NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module. 542 //========================================================== 543 #ifndef NRFX_I2S_CONFIG_LOG_ENABLED 544 #define NRFX_I2S_CONFIG_LOG_ENABLED 0 545 #endif 546 // <o> NRFX_I2S_CONFIG_LOG_LEVEL - Default severity level. 547 548 // <0=> Off 549 // <1=> Error 550 // <2=> Warning 551 // <3=> Info 552 // <4=> Debug 553 554 #ifndef NRFX_I2S_CONFIG_LOG_LEVEL 555 #define NRFX_I2S_CONFIG_LOG_LEVEL 3 556 #endif 557 558 // <o> NRFX_I2S_CONFIG_INFO_COLOR - ANSI escape code prefix. 559 560 // <0=> Default 561 // <1=> Black 562 // <2=> Red 563 // <3=> Green 564 // <4=> Yellow 565 // <5=> Blue 566 // <6=> Magenta 567 // <7=> Cyan 568 // <8=> White 569 570 #ifndef NRFX_I2S_CONFIG_INFO_COLOR 571 #define NRFX_I2S_CONFIG_INFO_COLOR 0 572 #endif 573 574 // <o> NRFX_I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 575 576 // <0=> Default 577 // <1=> Black 578 // <2=> Red 579 // <3=> Green 580 // <4=> Yellow 581 // <5=> Blue 582 // <6=> Magenta 583 // <7=> Cyan 584 // <8=> White 585 586 #ifndef NRFX_I2S_CONFIG_DEBUG_COLOR 587 #define NRFX_I2S_CONFIG_DEBUG_COLOR 0 588 #endif 589 590 // </e> 591 592 // </e> 593 594 // <e> NRFX_IPC_ENABLED - nrfx_ipc - IPC peripheral driver 595 //========================================================== 596 #ifndef NRFX_IPC_ENABLED 597 #define NRFX_IPC_ENABLED 0 598 #endif 599 600 // </e> 601 602 // <e> NRFX_LPCOMP_ENABLED - nrfx_lpcomp - LPCOMP peripheral driver 603 //========================================================== 604 #ifndef NRFX_LPCOMP_ENABLED 605 #define NRFX_LPCOMP_ENABLED 0 606 #endif 607 608 // <o> NRFX_LPCOMP_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority 609 610 // <0=> 0 (highest) 611 // <1=> 1 612 // <2=> 2 613 // <3=> 3 614 // <4=> 4 615 // <5=> 5 616 // <6=> 6 617 // <7=> 7 618 619 #ifndef NRFX_LPCOMP_DEFAULT_CONFIG_IRQ_PRIORITY 620 #define NRFX_LPCOMP_DEFAULT_CONFIG_IRQ_PRIORITY 7 621 #endif 622 623 // <e> NRFX_LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. 624 //========================================================== 625 #ifndef NRFX_LPCOMP_CONFIG_LOG_ENABLED 626 #define NRFX_LPCOMP_CONFIG_LOG_ENABLED 0 627 #endif 628 // <o> NRFX_LPCOMP_CONFIG_LOG_LEVEL - Default Severity level 629 630 // <0=> Off 631 // <1=> Error 632 // <2=> Warning 633 // <3=> Info 634 // <4=> Debug 635 636 #ifndef NRFX_LPCOMP_CONFIG_LOG_LEVEL 637 #define NRFX_LPCOMP_CONFIG_LOG_LEVEL 3 638 #endif 639 640 // <o> NRFX_LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. 641 642 // <0=> Default 643 // <1=> Black 644 // <2=> Red 645 // <3=> Green 646 // <4=> Yellow 647 // <5=> Blue 648 // <6=> Magenta 649 // <7=> Cyan 650 // <8=> White 651 652 #ifndef NRFX_LPCOMP_CONFIG_INFO_COLOR 653 #define NRFX_LPCOMP_CONFIG_INFO_COLOR 0 654 #endif 655 656 // <o> NRFX_LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 657 658 // <0=> Default 659 // <1=> Black 660 // <2=> Red 661 // <3=> Green 662 // <4=> Yellow 663 // <5=> Blue 664 // <6=> Magenta 665 // <7=> Cyan 666 // <8=> White 667 668 #ifndef NRFX_LPCOMP_CONFIG_DEBUG_COLOR 669 #define NRFX_LPCOMP_CONFIG_DEBUG_COLOR 0 670 #endif 671 672 // </e> 673 674 // </e> 675 676 // <e> NRFX_NFCT_ENABLED - nrfx_nfct - NFCT peripheral driver 677 //========================================================== 678 #ifndef NRFX_NFCT_ENABLED 679 #define NRFX_NFCT_ENABLED 0 680 #endif 681 // <o> NRFX_NFCT_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority 682 683 // <0=> 0 (highest) 684 // <1=> 1 685 // <2=> 2 686 // <3=> 3 687 // <4=> 4 688 // <5=> 5 689 // <6=> 6 690 // <7=> 7 691 692 #ifndef NRFX_NFCT_DEFAULT_CONFIG_IRQ_PRIORITY 693 #define NRFX_NFCT_DEFAULT_CONFIG_IRQ_PRIORITY 7 694 #endif 695 696 // <o> NRFX_NFCT_CONFIG_TIMER_INSTANCE_ID - Timer instance used for workarounds in the driver. 697 698 // <0=> 0 699 // <1=> 1 700 // <2=> 2 701 702 #ifndef NRFX_NFCT_CONFIG_TIMER_INSTANCE_ID 703 #define NRFX_NFCT_CONFIG_TIMER_INSTANCE_ID 2 704 #endif 705 706 // <e> NRFX_NFCT_CONFIG_LOG_ENABLED - Enables logging in the module. 707 //========================================================== 708 #ifndef NRFX_NFCT_CONFIG_LOG_ENABLED 709 #define NRFX_NFCT_CONFIG_LOG_ENABLED 0 710 #endif 711 // <o> NRFX_NFCT_CONFIG_LOG_LEVEL - Default Severity level 712 713 // <0=> Off 714 // <1=> Error 715 // <2=> Warning 716 // <3=> Info 717 // <4=> Debug 718 719 #ifndef NRFX_NFCT_CONFIG_LOG_LEVEL 720 #define NRFX_NFCT_CONFIG_LOG_LEVEL 3 721 #endif 722 723 // <o> NRFX_NFCT_CONFIG_INFO_COLOR - ANSI escape code prefix. 724 725 // <0=> Default 726 // <1=> Black 727 // <2=> Red 728 // <3=> Green 729 // <4=> Yellow 730 // <5=> Blue 731 // <6=> Magenta 732 // <7=> Cyan 733 // <8=> White 734 735 #ifndef NRFX_NFCT_CONFIG_INFO_COLOR 736 #define NRFX_NFCT_CONFIG_INFO_COLOR 0 737 #endif 738 739 // <o> NRFX_NFCT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 740 741 // <0=> Default 742 // <1=> Black 743 // <2=> Red 744 // <3=> Green 745 // <4=> Yellow 746 // <5=> Blue 747 // <6=> Magenta 748 // <7=> Cyan 749 // <8=> White 750 751 #ifndef NRFX_NFCT_CONFIG_DEBUG_COLOR 752 #define NRFX_NFCT_CONFIG_DEBUG_COLOR 0 753 #endif 754 755 // </e> 756 757 // </e> 758 759 // <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver 760 //========================================================== 761 #ifndef NRFX_NVMC_ENABLED 762 #define NRFX_NVMC_ENABLED 0 763 #endif 764 765 // </e> 766 767 // <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver. 768 //========================================================== 769 #ifndef NRFX_PDM_ENABLED 770 #define NRFX_PDM_ENABLED 0 771 #endif 772 773 // <o> NRFX_PDM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 774 775 // <0=> 0 (highest) 776 // <1=> 1 777 // <2=> 2 778 // <3=> 3 779 // <4=> 4 780 // <5=> 5 781 // <6=> 6 782 // <7=> 7 783 784 #ifndef NRFX_PDM_DEFAULT_CONFIG_IRQ_PRIORITY 785 #define NRFX_PDM_DEFAULT_CONFIG_IRQ_PRIORITY 7 786 #endif 787 788 // <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module. 789 //========================================================== 790 #ifndef NRFX_PDM_CONFIG_LOG_ENABLED 791 #define NRFX_PDM_CONFIG_LOG_ENABLED 0 792 #endif 793 // <o> NRFX_PDM_CONFIG_LOG_LEVEL - Default severity level. 794 795 // <0=> Off 796 // <1=> Error 797 // <2=> Warning 798 // <3=> Info 799 // <4=> Debug 800 801 #ifndef NRFX_PDM_CONFIG_LOG_LEVEL 802 #define NRFX_PDM_CONFIG_LOG_LEVEL 3 803 #endif 804 805 // <o> NRFX_PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. 806 807 // <0=> Default 808 // <1=> Black 809 // <2=> Red 810 // <3=> Green 811 // <4=> Yellow 812 // <5=> Blue 813 // <6=> Magenta 814 // <7=> Cyan 815 // <8=> White 816 817 #ifndef NRFX_PDM_CONFIG_INFO_COLOR 818 #define NRFX_PDM_CONFIG_INFO_COLOR 0 819 #endif 820 821 // <o> NRFX_PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 822 823 // <0=> Default 824 // <1=> Black 825 // <2=> Red 826 // <3=> Green 827 // <4=> Yellow 828 // <5=> Blue 829 // <6=> Magenta 830 // <7=> Cyan 831 // <8=> White 832 833 #ifndef NRFX_PDM_CONFIG_DEBUG_COLOR 834 #define NRFX_PDM_CONFIG_DEBUG_COLOR 0 835 #endif 836 837 // </e> 838 839 // </e> 840 841 // <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver. 842 //========================================================== 843 #ifndef NRFX_POWER_ENABLED 844 #define NRFX_POWER_ENABLED 0 845 #endif 846 // <o> NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 847 848 // <0=> 0 (highest) 849 // <1=> 1 850 // <2=> 2 851 // <3=> 3 852 // <4=> 4 853 // <5=> 5 854 // <6=> 6 855 // <7=> 7 856 857 #ifndef NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 858 #define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 859 #endif 860 861 // </e> 862 863 // <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing (PRS) module. 864 //========================================================== 865 #ifndef NRFX_PRS_ENABLED 866 #define NRFX_PRS_ENABLED 0 867 #endif 868 // <q> NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module. 869 870 871 #ifndef NRFX_PRS_BOX_0_ENABLED 872 #define NRFX_PRS_BOX_0_ENABLED 0 873 #endif 874 875 // <q> NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module. 876 877 878 #ifndef NRFX_PRS_BOX_1_ENABLED 879 #define NRFX_PRS_BOX_1_ENABLED 0 880 #endif 881 882 // <q> NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module. 883 884 885 #ifndef NRFX_PRS_BOX_2_ENABLED 886 #define NRFX_PRS_BOX_2_ENABLED 0 887 #endif 888 889 // <q> NRFX_PRS_BOX_3_ENABLED - Enables box 3 in the module. 890 891 892 #ifndef NRFX_PRS_BOX_3_ENABLED 893 #define NRFX_PRS_BOX_3_ENABLED 0 894 #endif 895 896 // <q> NRFX_PRS_BOX_4_ENABLED - Enables box 4 in the module. 897 898 899 #ifndef NRFX_PRS_BOX_4_ENABLED 900 #define NRFX_PRS_BOX_4_ENABLED 0 901 #endif 902 903 904 // <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module. 905 //========================================================== 906 #ifndef NRFX_PRS_CONFIG_LOG_ENABLED 907 #define NRFX_PRS_CONFIG_LOG_ENABLED 0 908 #endif 909 // <o> NRFX_PRS_CONFIG_LOG_LEVEL - Default severity level. 910 911 // <0=> Off 912 // <1=> Error 913 // <2=> Warning 914 // <3=> Info 915 // <4=> Debug 916 917 #ifndef NRFX_PRS_CONFIG_LOG_LEVEL 918 #define NRFX_PRS_CONFIG_LOG_LEVEL 3 919 #endif 920 921 // <o> NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix. 922 923 // <0=> Default 924 // <1=> Black 925 // <2=> Red 926 // <3=> Green 927 // <4=> Yellow 928 // <5=> Blue 929 // <6=> Magenta 930 // <7=> Cyan 931 // <8=> White 932 933 #ifndef NRFX_PRS_CONFIG_INFO_COLOR 934 #define NRFX_PRS_CONFIG_INFO_COLOR 0 935 #endif 936 937 // <o> NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 938 939 // <0=> Default 940 // <1=> Black 941 // <2=> Red 942 // <3=> Green 943 // <4=> Yellow 944 // <5=> Blue 945 // <6=> Magenta 946 // <7=> Cyan 947 // <8=> White 948 949 #ifndef NRFX_PRS_CONFIG_DEBUG_COLOR 950 #define NRFX_PRS_CONFIG_DEBUG_COLOR 0 951 #endif 952 953 // </e> 954 955 // </e> 956 957 // <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver. 958 //========================================================== 959 #ifndef NRFX_PWM_ENABLED 960 #define NRFX_PWM_ENABLED 0 961 #endif 962 // <q> NRFX_PWM0_ENABLED - Enables PWM0 instance. 963 964 965 #ifndef NRFX_PWM0_ENABLED 966 #define NRFX_PWM0_ENABLED 0 967 #endif 968 969 // <q> NRFX_PWM1_ENABLED - Enables PWM1 instance. 970 971 972 #ifndef NRFX_PWM1_ENABLED 973 #define NRFX_PWM1_ENABLED 0 974 #endif 975 976 // <q> NRFX_PWM2_ENABLED - Enables PWM2 instance. 977 978 979 #ifndef NRFX_PWM2_ENABLED 980 #define NRFX_PWM2_ENABLED 0 981 #endif 982 983 // <q> NRFX_PWM3_ENABLED - Enables PWM3 instance. 984 985 986 #ifndef NRFX_PWM3_ENABLED 987 #define NRFX_PWM3_ENABLED 0 988 #endif 989 990 // <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 991 992 // <0=> 0 (highest) 993 // <1=> 1 994 // <2=> 2 995 // <3=> 3 996 // <4=> 4 997 // <5=> 5 998 // <6=> 6 999 // <7=> 7 1000 1001 #ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 1002 #define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7 1003 #endif 1004 1005 // <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module. 1006 //========================================================== 1007 #ifndef NRFX_PWM_CONFIG_LOG_ENABLED 1008 #define NRFX_PWM_CONFIG_LOG_ENABLED 0 1009 #endif 1010 // <o> NRFX_PWM_CONFIG_LOG_LEVEL - Default severity level. 1011 1012 // <0=> Off 1013 // <1=> Error 1014 // <2=> Warning 1015 // <3=> Info 1016 // <4=> Debug 1017 1018 #ifndef NRFX_PWM_CONFIG_LOG_LEVEL 1019 #define NRFX_PWM_CONFIG_LOG_LEVEL 3 1020 #endif 1021 1022 // <o> NRFX_PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. 1023 1024 // <0=> Default 1025 // <1=> Black 1026 // <2=> Red 1027 // <3=> Green 1028 // <4=> Yellow 1029 // <5=> Blue 1030 // <6=> Magenta 1031 // <7=> Cyan 1032 // <8=> White 1033 1034 #ifndef NRFX_PWM_CONFIG_INFO_COLOR 1035 #define NRFX_PWM_CONFIG_INFO_COLOR 0 1036 #endif 1037 1038 // <o> NRFX_PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1039 1040 // <0=> Default 1041 // <1=> Black 1042 // <2=> Red 1043 // <3=> Green 1044 // <4=> Yellow 1045 // <5=> Blue 1046 // <6=> Magenta 1047 // <7=> Cyan 1048 // <8=> White 1049 1050 #ifndef NRFX_PWM_CONFIG_DEBUG_COLOR 1051 #define NRFX_PWM_CONFIG_DEBUG_COLOR 0 1052 #endif 1053 1054 // </e> 1055 1056 // </e> 1057 1058 // <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver 1059 //========================================================== 1060 #ifndef NRFX_QDEC_ENABLED 1061 #define NRFX_QDEC_ENABLED 0 1062 #endif 1063 1064 // <o> NRFX_QDEC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority 1065 1066 // <0=> 0 (highest) 1067 // <1=> 1 1068 // <2=> 2 1069 // <3=> 3 1070 // <4=> 4 1071 // <5=> 5 1072 // <6=> 6 1073 // <7=> 7 1074 1075 #ifndef NRFX_QDEC_DEFAULT_CONFIG_IRQ_PRIORITY 1076 #define NRFX_QDEC_DEFAULT_CONFIG_IRQ_PRIORITY 7 1077 #endif 1078 1079 // <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. 1080 //========================================================== 1081 #ifndef NRFX_QDEC_CONFIG_LOG_ENABLED 1082 #define NRFX_QDEC_CONFIG_LOG_ENABLED 0 1083 #endif 1084 // <o> NRFX_QDEC_CONFIG_LOG_LEVEL - Default Severity level 1085 1086 // <0=> Off 1087 // <1=> Error 1088 // <2=> Warning 1089 // <3=> Info 1090 // <4=> Debug 1091 1092 #ifndef NRFX_QDEC_CONFIG_LOG_LEVEL 1093 #define NRFX_QDEC_CONFIG_LOG_LEVEL 3 1094 #endif 1095 1096 // <o> NRFX_QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. 1097 1098 // <0=> Default 1099 // <1=> Black 1100 // <2=> Red 1101 // <3=> Green 1102 // <4=> Yellow 1103 // <5=> Blue 1104 // <6=> Magenta 1105 // <7=> Cyan 1106 // <8=> White 1107 1108 #ifndef NRFX_QDEC_CONFIG_INFO_COLOR 1109 #define NRFX_QDEC_CONFIG_INFO_COLOR 0 1110 #endif 1111 1112 // <o> NRFX_QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1113 1114 // <0=> Default 1115 // <1=> Black 1116 // <2=> Red 1117 // <3=> Green 1118 // <4=> Yellow 1119 // <5=> Blue 1120 // <6=> Magenta 1121 // <7=> Cyan 1122 // <8=> White 1123 1124 #ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR 1125 #define NRFX_QDEC_CONFIG_DEBUG_COLOR 0 1126 #endif 1127 1128 // </e> 1129 1130 // </e> 1131 1132 // <e> NRFX_QSPI_ENABLED - nrfx_qspi - QSPI peripheral driver 1133 //========================================================== 1134 #ifndef NRFX_QSPI_ENABLED 1135 #define NRFX_QSPI_ENABLED 0 1136 #endif 1137 1138 // <o> NRFX_QSPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority 1139 1140 // <0=> 0 (highest) 1141 // <1=> 1 1142 // <2=> 2 1143 // <3=> 3 1144 // <4=> 4 1145 // <5=> 5 1146 // <6=> 6 1147 // <7=> 7 1148 1149 #ifndef NRFX_QSPI_DEFAULT_CONFIG_IRQ_PRIORITY 1150 #define NRFX_QSPI_DEFAULT_CONFIG_IRQ_PRIORITY 7 1151 #endif 1152 1153 // </e> 1154 1155 // <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver. 1156 //========================================================== 1157 #ifndef NRFX_RTC_ENABLED 1158 #define NRFX_RTC_ENABLED 0 1159 #endif 1160 // <q> NRFX_RTC0_ENABLED - Enables RTC0 instance. 1161 1162 1163 #ifndef NRFX_RTC0_ENABLED 1164 #define NRFX_RTC0_ENABLED 0 1165 #endif 1166 1167 // <q> NRFX_RTC1_ENABLED - Enables RTC1 instance. 1168 1169 1170 #ifndef NRFX_RTC1_ENABLED 1171 #define NRFX_RTC1_ENABLED 0 1172 #endif 1173 1174 // <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 1175 1176 // <0=> 0 (highest) 1177 // <1=> 1 1178 // <2=> 2 1179 // <3=> 3 1180 // <4=> 4 1181 // <5=> 5 1182 // <6=> 6 1183 // <7=> 7 1184 1185 #ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 1186 #define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7 1187 #endif 1188 1189 // <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module. 1190 //========================================================== 1191 #ifndef NRFX_RTC_CONFIG_LOG_ENABLED 1192 #define NRFX_RTC_CONFIG_LOG_ENABLED 0 1193 #endif 1194 // <o> NRFX_RTC_CONFIG_LOG_LEVEL - Default severity level. 1195 1196 // <0=> Off 1197 // <1=> Error 1198 // <2=> Warning 1199 // <3=> Info 1200 // <4=> Debug 1201 1202 #ifndef NRFX_RTC_CONFIG_LOG_LEVEL 1203 #define NRFX_RTC_CONFIG_LOG_LEVEL 3 1204 #endif 1205 1206 // <o> NRFX_RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. 1207 1208 // <0=> Default 1209 // <1=> Black 1210 // <2=> Red 1211 // <3=> Green 1212 // <4=> Yellow 1213 // <5=> Blue 1214 // <6=> Magenta 1215 // <7=> Cyan 1216 // <8=> White 1217 1218 #ifndef NRFX_RTC_CONFIG_INFO_COLOR 1219 #define NRFX_RTC_CONFIG_INFO_COLOR 0 1220 #endif 1221 1222 // <o> NRFX_RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1223 1224 // <0=> Default 1225 // <1=> Black 1226 // <2=> Red 1227 // <3=> Green 1228 // <4=> Yellow 1229 // <5=> Blue 1230 // <6=> Magenta 1231 // <7=> Cyan 1232 // <8=> White 1233 1234 #ifndef NRFX_RTC_CONFIG_DEBUG_COLOR 1235 #define NRFX_RTC_CONFIG_DEBUG_COLOR 0 1236 #endif 1237 1238 // </e> 1239 1240 // </e> 1241 1242 // <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver. 1243 //========================================================== 1244 #ifndef NRFX_SAADC_ENABLED 1245 #define NRFX_SAADC_ENABLED 0 1246 #endif 1247 1248 // <o> NRFX_SAADC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 1249 1250 // <0=> 0 (highest) 1251 // <1=> 1 1252 // <2=> 2 1253 // <3=> 3 1254 // <4=> 4 1255 // <5=> 5 1256 // <6=> 6 1257 // <7=> 7 1258 1259 #ifndef NRFX_SAADC_DEFAULT_CONFIG_IRQ_PRIORITY 1260 #define NRFX_SAADC_DEFAULT_CONFIG_IRQ_PRIORITY 7 1261 #endif 1262 1263 // <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. 1264 //========================================================== 1265 #ifndef NRFX_SAADC_CONFIG_LOG_ENABLED 1266 #define NRFX_SAADC_CONFIG_LOG_ENABLED 0 1267 #endif 1268 // <o> NRFX_SAADC_CONFIG_LOG_LEVEL - Default severity level. 1269 1270 // <0=> Off 1271 // <1=> Error 1272 // <2=> Warning 1273 // <3=> Info 1274 // <4=> Debug 1275 1276 #ifndef NRFX_SAADC_CONFIG_LOG_LEVEL 1277 #define NRFX_SAADC_CONFIG_LOG_LEVEL 3 1278 #endif 1279 1280 // <o> NRFX_SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. 1281 1282 // <0=> Default 1283 // <1=> Black 1284 // <2=> Red 1285 // <3=> Green 1286 // <4=> Yellow 1287 // <5=> Blue 1288 // <6=> Magenta 1289 // <7=> Cyan 1290 // <8=> White 1291 1292 #ifndef NRFX_SAADC_CONFIG_INFO_COLOR 1293 #define NRFX_SAADC_CONFIG_INFO_COLOR 0 1294 #endif 1295 1296 // <o> NRFX_SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1297 1298 // <0=> Default 1299 // <1=> Black 1300 // <2=> Red 1301 // <3=> Green 1302 // <4=> Yellow 1303 // <5=> Blue 1304 // <6=> Magenta 1305 // <7=> Cyan 1306 // <8=> White 1307 1308 #ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR 1309 #define NRFX_SAADC_CONFIG_DEBUG_COLOR 0 1310 #endif 1311 1312 // </e> 1313 1314 // </e> 1315 1316 // <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver. 1317 //========================================================== 1318 #ifndef NRFX_SPIM_ENABLED 1319 #define NRFX_SPIM_ENABLED 0 1320 #endif 1321 // <q> NRFX_SPIM0_ENABLED - Enables SPIM0 instance. 1322 1323 1324 #ifndef NRFX_SPIM0_ENABLED 1325 #define NRFX_SPIM0_ENABLED 0 1326 #endif 1327 1328 // <q> NRFX_SPIM1_ENABLED - Enables SPIM1 instance. 1329 1330 1331 #ifndef NRFX_SPIM1_ENABLED 1332 #define NRFX_SPIM1_ENABLED 0 1333 #endif 1334 1335 // <q> NRFX_SPIM2_ENABLED - Enables SPIM2 instance. 1336 1337 1338 #ifndef NRFX_SPIM2_ENABLED 1339 #define NRFX_SPIM2_ENABLED 0 1340 #endif 1341 1342 // <q> NRFX_SPIM3_ENABLED - Enables SPIM3 instance. 1343 1344 1345 #ifndef NRFX_SPIM3_ENABLED 1346 #define NRFX_SPIM3_ENABLED 0 1347 #endif 1348 1349 // <q> NRFX_SPIM4_ENABLED - Enables SPIM4 instance. 1350 1351 1352 #ifndef NRFX_SPIM4_ENABLED 1353 #define NRFX_SPIM4_ENABLED 0 1354 #endif 1355 1356 // <q> NRFX_SPIM_EXTENDED_ENABLED - Enable extended SPIM features 1357 1358 1359 #ifndef NRFX_SPIM_EXTENDED_ENABLED 1360 #define NRFX_SPIM_EXTENDED_ENABLED 0 1361 #endif 1362 1363 // <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 1364 1365 // <0=> 0 (highest) 1366 // <1=> 1 1367 // <2=> 2 1368 // <3=> 3 1369 // <4=> 4 1370 // <5=> 5 1371 // <6=> 6 1372 // <7=> 7 1373 1374 #ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 1375 #define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 1376 #endif 1377 1378 // <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module. 1379 //========================================================== 1380 #ifndef NRFX_SPIM_CONFIG_LOG_ENABLED 1381 #define NRFX_SPIM_CONFIG_LOG_ENABLED 0 1382 #endif 1383 // <o> NRFX_SPIM_CONFIG_LOG_LEVEL - Default severity level. 1384 1385 // <0=> Off 1386 // <1=> Error 1387 // <2=> Warning 1388 // <3=> Info 1389 // <4=> Debug 1390 1391 #ifndef NRFX_SPIM_CONFIG_LOG_LEVEL 1392 #define NRFX_SPIM_CONFIG_LOG_LEVEL 3 1393 #endif 1394 1395 // <o> NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix. 1396 1397 // <0=> Default 1398 // <1=> Black 1399 // <2=> Red 1400 // <3=> Green 1401 // <4=> Yellow 1402 // <5=> Blue 1403 // <6=> Magenta 1404 // <7=> Cyan 1405 // <8=> White 1406 1407 #ifndef NRFX_SPIM_CONFIG_INFO_COLOR 1408 #define NRFX_SPIM_CONFIG_INFO_COLOR 0 1409 #endif 1410 1411 // <o> NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1412 1413 // <0=> Default 1414 // <1=> Black 1415 // <2=> Red 1416 // <3=> Green 1417 // <4=> Yellow 1418 // <5=> Blue 1419 // <6=> Magenta 1420 // <7=> Cyan 1421 // <8=> White 1422 1423 #ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR 1424 #define NRFX_SPIM_CONFIG_DEBUG_COLOR 0 1425 #endif 1426 1427 // </e> 1428 1429 // </e> 1430 1431 // <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver. 1432 //========================================================== 1433 #ifndef NRFX_SPIS_ENABLED 1434 #define NRFX_SPIS_ENABLED 0 1435 #endif 1436 // <q> NRFX_SPIS0_ENABLED - Enables SPIS0 instance. 1437 1438 1439 #ifndef NRFX_SPIS0_ENABLED 1440 #define NRFX_SPIS0_ENABLED 0 1441 #endif 1442 1443 // <q> NRFX_SPIS1_ENABLED - Enables SPIS1 instance. 1444 1445 1446 #ifndef NRFX_SPIS1_ENABLED 1447 #define NRFX_SPIS1_ENABLED 0 1448 #endif 1449 1450 // <q> NRFX_SPIS2_ENABLED - Enables SPIS2 instance. 1451 1452 1453 #ifndef NRFX_SPIS2_ENABLED 1454 #define NRFX_SPIS2_ENABLED 0 1455 #endif 1456 1457 // <q> NRFX_SPIS3_ENABLED - Enables SPIS3 instance. 1458 1459 1460 #ifndef NRFX_SPIS3_ENABLED 1461 #define NRFX_SPIS3_ENABLED 0 1462 #endif 1463 1464 // <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 1465 1466 // <0=> 0 (highest) 1467 // <1=> 1 1468 // <2=> 2 1469 // <3=> 3 1470 // <4=> 4 1471 // <5=> 5 1472 // <6=> 6 1473 // <7=> 7 1474 1475 #ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 1476 #define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 1477 #endif 1478 1479 // <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. 1480 //========================================================== 1481 #ifndef NRFX_SPIS_CONFIG_LOG_ENABLED 1482 #define NRFX_SPIS_CONFIG_LOG_ENABLED 0 1483 #endif 1484 // <o> NRFX_SPIS_CONFIG_LOG_LEVEL - Default severity level. 1485 1486 // <0=> Off 1487 // <1=> Error 1488 // <2=> Warning 1489 // <3=> Info 1490 // <4=> Debug 1491 1492 #ifndef NRFX_SPIS_CONFIG_LOG_LEVEL 1493 #define NRFX_SPIS_CONFIG_LOG_LEVEL 3 1494 #endif 1495 1496 // <o> NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. 1497 1498 // <0=> Default 1499 // <1=> Black 1500 // <2=> Red 1501 // <3=> Green 1502 // <4=> Yellow 1503 // <5=> Blue 1504 // <6=> Magenta 1505 // <7=> Cyan 1506 // <8=> White 1507 1508 #ifndef NRFX_SPIS_CONFIG_INFO_COLOR 1509 #define NRFX_SPIS_CONFIG_INFO_COLOR 0 1510 #endif 1511 1512 // <o> NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1513 1514 // <0=> Default 1515 // <1=> Black 1516 // <2=> Red 1517 // <3=> Green 1518 // <4=> Yellow 1519 // <5=> Blue 1520 // <6=> Magenta 1521 // <7=> Cyan 1522 // <8=> White 1523 1524 #ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR 1525 #define NRFX_SPIS_CONFIG_DEBUG_COLOR 0 1526 #endif 1527 1528 // </e> 1529 1530 // </e> 1531 1532 // <q> NRFX_SYSTICK_ENABLED - nrfx_systick - ARM(R) SysTick driver. 1533 1534 1535 #ifndef NRFX_SYSTICK_ENABLED 1536 #define NRFX_SYSTICK_ENABLED 0 1537 #endif 1538 1539 // <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver. 1540 //========================================================== 1541 #ifndef NRFX_TIMER_ENABLED 1542 #define NRFX_TIMER_ENABLED 0 1543 #endif 1544 // <q> NRFX_TIMER0_ENABLED - Enables TIMER0 instance. 1545 1546 1547 #ifndef NRFX_TIMER0_ENABLED 1548 #define NRFX_TIMER0_ENABLED 0 1549 #endif 1550 1551 // <q> NRFX_TIMER1_ENABLED - Enables TIMER1 instance. 1552 1553 1554 #ifndef NRFX_TIMER1_ENABLED 1555 #define NRFX_TIMER1_ENABLED 0 1556 #endif 1557 1558 // <q> NRFX_TIMER2_ENABLED - Enables TIMER2 instance. 1559 1560 1561 #ifndef NRFX_TIMER2_ENABLED 1562 #define NRFX_TIMER2_ENABLED 0 1563 #endif 1564 1565 // <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 1566 1567 // <0=> 0 (highest) 1568 // <1=> 1 1569 // <2=> 2 1570 // <3=> 3 1571 // <4=> 4 1572 // <5=> 5 1573 // <6=> 6 1574 // <7=> 7 1575 1576 #ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 1577 #define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7 1578 #endif 1579 1580 // <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. 1581 //========================================================== 1582 #ifndef NRFX_TIMER_CONFIG_LOG_ENABLED 1583 #define NRFX_TIMER_CONFIG_LOG_ENABLED 0 1584 #endif 1585 // <o> NRFX_TIMER_CONFIG_LOG_LEVEL - Default severity level. 1586 1587 // <0=> Off 1588 // <1=> Error 1589 // <2=> Warning 1590 // <3=> Info 1591 // <4=> Debug 1592 1593 #ifndef NRFX_TIMER_CONFIG_LOG_LEVEL 1594 #define NRFX_TIMER_CONFIG_LOG_LEVEL 3 1595 #endif 1596 1597 // <o> NRFX_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. 1598 1599 // <0=> Default 1600 // <1=> Black 1601 // <2=> Red 1602 // <3=> Green 1603 // <4=> Yellow 1604 // <5=> Blue 1605 // <6=> Magenta 1606 // <7=> Cyan 1607 // <8=> White 1608 1609 #ifndef NRFX_TIMER_CONFIG_INFO_COLOR 1610 #define NRFX_TIMER_CONFIG_INFO_COLOR 0 1611 #endif 1612 1613 // <o> NRFX_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1614 1615 // <0=> Default 1616 // <1=> Black 1617 // <2=> Red 1618 // <3=> Green 1619 // <4=> Yellow 1620 // <5=> Blue 1621 // <6=> Magenta 1622 // <7=> Cyan 1623 // <8=> White 1624 1625 #ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR 1626 #define NRFX_TIMER_CONFIG_DEBUG_COLOR 0 1627 #endif 1628 1629 // </e> 1630 1631 // </e> 1632 1633 // <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver. 1634 //========================================================== 1635 #ifndef NRFX_TWIM_ENABLED 1636 #define NRFX_TWIM_ENABLED 0 1637 #endif 1638 // <q> NRFX_TWIM0_ENABLED - Enables TWIM0 instance. 1639 1640 1641 #ifndef NRFX_TWIM0_ENABLED 1642 #define NRFX_TWIM0_ENABLED 0 1643 #endif 1644 1645 // <q> NRFX_TWIM1_ENABLED - Enables TWIM1 instance. 1646 1647 1648 #ifndef NRFX_TWIM1_ENABLED 1649 #define NRFX_TWIM1_ENABLED 0 1650 #endif 1651 1652 // <q> NRFX_TWIM2_ENABLED - Enables TWIM2 instance. 1653 1654 1655 #ifndef NRFX_TWIM2_ENABLED 1656 #define NRFX_TWIM2_ENABLED 0 1657 #endif 1658 1659 // <q> NRFX_TWIM3_ENABLED - Enables TWIM3 instance. 1660 1661 1662 #ifndef NRFX_TWIM3_ENABLED 1663 #define NRFX_TWIM3_ENABLED 0 1664 #endif 1665 1666 // <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 1667 1668 // <0=> 0 (highest) 1669 // <1=> 1 1670 // <2=> 2 1671 // <3=> 3 1672 // <4=> 4 1673 // <5=> 5 1674 // <6=> 6 1675 // <7=> 7 1676 1677 #ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 1678 #define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 1679 #endif 1680 1681 // <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module. 1682 //========================================================== 1683 #ifndef NRFX_TWIM_CONFIG_LOG_ENABLED 1684 #define NRFX_TWIM_CONFIG_LOG_ENABLED 0 1685 #endif 1686 // <o> NRFX_TWIM_CONFIG_LOG_LEVEL - Default severity level. 1687 1688 // <0=> Off 1689 // <1=> Error 1690 // <2=> Warning 1691 // <3=> Info 1692 // <4=> Debug 1693 1694 #ifndef NRFX_TWIM_CONFIG_LOG_LEVEL 1695 #define NRFX_TWIM_CONFIG_LOG_LEVEL 3 1696 #endif 1697 1698 // <o> NRFX_TWIM_CONFIG_INFO_COLOR - ANSI escape code prefix. 1699 1700 // <0=> Default 1701 // <1=> Black 1702 // <2=> Red 1703 // <3=> Green 1704 // <4=> Yellow 1705 // <5=> Blue 1706 // <6=> Magenta 1707 // <7=> Cyan 1708 // <8=> White 1709 1710 #ifndef NRFX_TWIM_CONFIG_INFO_COLOR 1711 #define NRFX_TWIM_CONFIG_INFO_COLOR 0 1712 #endif 1713 1714 // <o> NRFX_TWIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1715 1716 // <0=> Default 1717 // <1=> Black 1718 // <2=> Red 1719 // <3=> Green 1720 // <4=> Yellow 1721 // <5=> Blue 1722 // <6=> Magenta 1723 // <7=> Cyan 1724 // <8=> White 1725 1726 #ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR 1727 #define NRFX_TWIM_CONFIG_DEBUG_COLOR 0 1728 #endif 1729 1730 // </e> 1731 1732 // </e> 1733 1734 // <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver. 1735 //========================================================== 1736 #ifndef NRFX_TWIS_ENABLED 1737 #define NRFX_TWIS_ENABLED 0 1738 #endif 1739 1740 // <q> NRFX_TWIS0_ENABLED - Enables TWIS0 instance. 1741 1742 #ifndef NRFX_TWIS0_ENABLED 1743 #define NRFX_TWIS0_ENABLED 0 1744 #endif 1745 1746 // <q> NRFX_TWIS1_ENABLED - Enables TWIS1 instance. 1747 1748 #ifndef NRFX_TWIS1_ENABLED 1749 #define NRFX_TWIS1_ENABLED 0 1750 #endif 1751 1752 // <q> NRFX_TWIS2_ENABLED - Enables TWIS2 instance. 1753 1754 #ifndef NRFX_TWIS2_ENABLED 1755 #define NRFX_TWIS2_ENABLED 0 1756 #endif 1757 1758 // <q> NRFX_TWIS3_ENABLED - Enables TWIS3 instance. 1759 1760 #ifndef NRFX_TWIS3_ENABLED 1761 #define NRFX_TWIS3_ENABLED 0 1762 #endif 1763 1764 // <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assumes that any instance would be initialized only once. 1765 1766 // <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code. 1767 1768 #ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 1769 #define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0 1770 #endif 1771 1772 // <q> NRFX_TWIS_NO_SYNC_MODE - Removes support for synchronous mode. 1773 1774 // <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources. 1775 1776 #ifndef NRFX_TWIS_NO_SYNC_MODE 1777 #define NRFX_TWIS_NO_SYNC_MODE 0 1778 #endif 1779 1780 // <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 1781 1782 // <0=> 0 (highest) 1783 // <1=> 1 1784 // <2=> 2 1785 // <3=> 3 1786 // <4=> 4 1787 // <5=> 5 1788 // <6=> 6 1789 // <7=> 7 1790 1791 #ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 1792 #define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 1793 #endif 1794 1795 // <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. 1796 //========================================================== 1797 #ifndef NRFX_TWIS_CONFIG_LOG_ENABLED 1798 #define NRFX_TWIS_CONFIG_LOG_ENABLED 0 1799 #endif 1800 // <o> NRFX_TWIS_CONFIG_LOG_LEVEL - Default severity level. 1801 1802 // <0=> Off 1803 // <1=> Error 1804 // <2=> Warning 1805 // <3=> Info 1806 // <4=> Debug 1807 1808 #ifndef NRFX_TWIS_CONFIG_LOG_LEVEL 1809 #define NRFX_TWIS_CONFIG_LOG_LEVEL 3 1810 #endif 1811 1812 // <o> NRFX_TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. 1813 1814 // <0=> Default 1815 // <1=> Black 1816 // <2=> Red 1817 // <3=> Green 1818 // <4=> Yellow 1819 // <5=> Blue 1820 // <6=> Magenta 1821 // <7=> Cyan 1822 // <8=> White 1823 1824 #ifndef NRFX_TWIS_CONFIG_INFO_COLOR 1825 #define NRFX_TWIS_CONFIG_INFO_COLOR 0 1826 #endif 1827 1828 // <o> NRFX_TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1829 1830 // <0=> Default 1831 // <1=> Black 1832 // <2=> Red 1833 // <3=> Green 1834 // <4=> Yellow 1835 // <5=> Blue 1836 // <6=> Magenta 1837 // <7=> Cyan 1838 // <8=> White 1839 1840 #ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR 1841 #define NRFX_TWIS_CONFIG_DEBUG_COLOR 0 1842 #endif 1843 1844 // </e> 1845 1846 // </e> 1847 1848 // <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver. 1849 //========================================================== 1850 #ifndef NRFX_UARTE_ENABLED 1851 #define NRFX_UARTE_ENABLED 0 1852 #endif 1853 // <o> NRFX_UARTE0_ENABLED - Enables UARTE0 instances 1854 #ifndef NRFX_UARTE0_ENABLED 1855 #define NRFX_UARTE0_ENABLED 0 1856 #endif 1857 1858 // <o> NRFX_UARTE1_ENABLED - Enables UARTE1 instance. 1859 #ifndef NRFX_UARTE1_ENABLED 1860 #define NRFX_UARTE1_ENABLED 0 1861 #endif 1862 1863 // <o> NRFX_UARTE2_ENABLED - Enables UARTE2 instance. 1864 #ifndef NRFX_UARTE2_ENABLED 1865 #define NRFX_UARTE2_ENABLED 0 1866 #endif 1867 1868 // <o> NRFX_UARTE3_ENABLED - Enables UARTE3 instance. 1869 #ifndef NRFX_UARTE3_ENABLED 1870 #define NRFX_UARTE3_ENABLED 0 1871 #endif 1872 1873 // <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 1874 1875 // <0=> 0 (highest) 1876 // <1=> 1 1877 // <2=> 2 1878 // <3=> 3 1879 // <4=> 4 1880 // <5=> 5 1881 // <6=> 6 1882 // <7=> 7 1883 1884 #ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 1885 #define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 1886 #endif 1887 1888 // <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module. 1889 //========================================================== 1890 #ifndef NRFX_UARTE_CONFIG_LOG_ENABLED 1891 #define NRFX_UARTE_CONFIG_LOG_ENABLED 0 1892 #endif 1893 // <o> NRFX_UARTE_CONFIG_LOG_LEVEL - Default severity level. 1894 1895 // <0=> Off 1896 // <1=> Error 1897 // <2=> Warning 1898 // <3=> Info 1899 // <4=> Debug 1900 1901 #ifndef NRFX_UARTE_CONFIG_LOG_LEVEL 1902 #define NRFX_UARTE_CONFIG_LOG_LEVEL 3 1903 #endif 1904 1905 // <o> NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. 1906 1907 // <0=> Default 1908 // <1=> Black 1909 // <2=> Red 1910 // <3=> Green 1911 // <4=> Yellow 1912 // <5=> Blue 1913 // <6=> Magenta 1914 // <7=> Cyan 1915 // <8=> White 1916 1917 #ifndef NRFX_UARTE_CONFIG_INFO_COLOR 1918 #define NRFX_UARTE_CONFIG_INFO_COLOR 0 1919 #endif 1920 1921 // <o> NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 1922 1923 // <0=> Default 1924 // <1=> Black 1925 // <2=> Red 1926 // <3=> Green 1927 // <4=> Yellow 1928 // <5=> Blue 1929 // <6=> Magenta 1930 // <7=> Cyan 1931 // <8=> White 1932 1933 #ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR 1934 #define NRFX_UARTE_CONFIG_DEBUG_COLOR 0 1935 #endif 1936 1937 // </e> 1938 1939 // </e> 1940 1941 // <e> NRFX_USBD_ENABLED - nrfx_usbd - USBD peripheral driver 1942 //========================================================== 1943 #ifndef NRFX_USBD_ENABLED 1944 #define NRFX_USBD_ENABLED 0 1945 #endif 1946 // <o> NRFX_USBD_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority 1947 1948 // <0=> 0 (highest) 1949 // <1=> 1 1950 // <2=> 2 1951 // <3=> 3 1952 // <4=> 4 1953 // <5=> 5 1954 // <6=> 6 1955 // <7=> 7 1956 1957 #ifndef NRFX_USBD_DEFAULT_CONFIG_IRQ_PRIORITY 1958 #define NRFX_USBD_DEFAULT_CONFIG_IRQ_PRIORITY 7 1959 #endif 1960 1961 // <q> USBD_CONFIG_DMASCHEDULER_ISO_BOOST - Give priority to isochronous transfers 1962 1963 // <i> This option gives priority to isochronous transfers. 1964 // <i> Enabling it assures that isochronous transfers are always processed, 1965 // <i> even if multiple other transfers are pending. 1966 // <i> Isochronous endpoints are prioritized before the usbd_dma_scheduler_algorithm 1967 // <i> function is called, so the option is independent of the algorithm chosen. 1968 1969 #ifndef NRFX_USBD_CONFIG_DMASCHEDULER_ISO_BOOST 1970 #define NRFX_USBD_CONFIG_DMASCHEDULER_ISO_BOOST 1 1971 #endif 1972 1973 // <q> USBD_CONFIG_ISO_IN_ZLP - Respond to an IN token on ISO IN endpoint with ZLP when no data is ready 1974 1975 1976 // <i> If set, ISO IN endpoint will respond to an IN token with ZLP when no data is ready to be sent. 1977 // <i> Else, there will be no response. 1978 1979 #ifndef NRFX_USBD_CONFIG_ISO_IN_ZLP 1980 #define NRFX_USBD_CONFIG_ISO_IN_ZLP 0 1981 #endif 1982 1983 // <e> NRFX_USBD_CONFIG_LOG_ENABLED - Enable logging in the module 1984 //========================================================== 1985 #ifndef NRFX_USBD_CONFIG_LOG_ENABLED 1986 #define NRFX_USBD_CONFIG_LOG_ENABLED 0 1987 #endif 1988 // <o> NRFX_USBD_CONFIG_LOG_LEVEL - Default Severity level 1989 1990 // <0=> Off 1991 // <1=> Error 1992 // <2=> Warning 1993 // <3=> Info 1994 // <4=> Debug 1995 1996 #ifndef NRFX_USBD_CONFIG_LOG_LEVEL 1997 #define NRFX_USBD_CONFIG_LOG_LEVEL 3 1998 #endif 1999 2000 // <o> NRFX_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. 2001 2002 // <0=> Default 2003 // <1=> Black 2004 // <2=> Red 2005 // <3=> Green 2006 // <4=> Yellow 2007 // <5=> Blue 2008 // <6=> Magenta 2009 // <7=> Cyan 2010 // <8=> White 2011 2012 #ifndef NRFX_USBD_CONFIG_INFO_COLOR 2013 #define NRFX_USBD_CONFIG_INFO_COLOR 0 2014 #endif 2015 2016 // <o> NRFX_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 2017 2018 // <0=> Default 2019 // <1=> Black 2020 // <2=> Red 2021 // <3=> Green 2022 // <4=> Yellow 2023 // <5=> Blue 2024 // <6=> Magenta 2025 // <7=> Cyan 2026 // <8=> White 2027 2028 #ifndef NRFX_USBD_CONFIG_DEBUG_COLOR 2029 #define NRFX_USBD_CONFIG_DEBUG_COLOR 0 2030 #endif 2031 2032 // </e> 2033 2034 // </e> 2035 2036 // <e> NRFX_USBREG_ENABLED - nrfx_usbreg - USBREG peripheral driver 2037 //========================================================== 2038 #ifndef NRFX_USBREG_ENABLED 2039 #define NRFX_USBREG_ENABLED 0 2040 #endif 2041 // <o> NRFX_USBREG_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority 2042 2043 // <0=> 0 (highest) 2044 // <1=> 1 2045 // <2=> 2 2046 // <3=> 3 2047 // <4=> 4 2048 // <5=> 5 2049 // <6=> 6 2050 // <7=> 7 2051 2052 #ifndef NRFX_USBREG_DEFAULT_CONFIG_IRQ_PRIORITY 2053 #define NRFX_USBREG_DEFAULT_CONFIG_IRQ_PRIORITY 7 2054 #endif 2055 2056 // </e> 2057 2058 // </e> 2059 2060 // <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver. 2061 //========================================================== 2062 #ifndef NRFX_WDT_ENABLED 2063 #define NRFX_WDT_ENABLED 0 2064 #endif 2065 // <q> NRFX_WDT0_ENABLED - Enable WDT0 instance. 2066 2067 2068 #ifndef NRFX_WDT0_ENABLED 2069 #define NRFX_WDT0_ENABLED 0 2070 #endif 2071 2072 // <q> NRFX_WDT1_ENABLED - Enable WDT1 instance. 2073 2074 2075 #ifndef NRFX_WDT1_ENABLED 2076 #define NRFX_WDT1_ENABLED 0 2077 #endif 2078 2079 // <o> NRFX_WDT_CONFIG_NO_IRQ - Remove WDT IRQ handling from WDT driver. 2080 2081 // <0=> Include WDT IRQ handling 2082 // <1=> Remove WDT IRQ handling 2083 2084 #ifndef NRFX_WDT_CONFIG_NO_IRQ 2085 #define NRFX_WDT_CONFIG_NO_IRQ 0 2086 #endif 2087 2088 // <o> NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. 2089 2090 // <0=> 0 (highest) 2091 // <1=> 1 2092 // <2=> 2 2093 // <3=> 3 2094 // <4=> 4 2095 // <5=> 5 2096 // <6=> 6 2097 // <7=> 7 2098 2099 #ifndef NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY 2100 #define NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY 7 2101 #endif 2102 2103 // <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module. 2104 //========================================================== 2105 #ifndef NRFX_WDT_CONFIG_LOG_ENABLED 2106 #define NRFX_WDT_CONFIG_LOG_ENABLED 0 2107 #endif 2108 // <o> NRFX_WDT_CONFIG_LOG_LEVEL - Default severity level. 2109 2110 // <0=> Off 2111 // <1=> Error 2112 // <2=> Warning 2113 // <3=> Info 2114 // <4=> Debug 2115 2116 #ifndef NRFX_WDT_CONFIG_LOG_LEVEL 2117 #define NRFX_WDT_CONFIG_LOG_LEVEL 3 2118 #endif 2119 2120 // <o> NRFX_WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. 2121 2122 // <0=> Default 2123 // <1=> Black 2124 // <2=> Red 2125 // <3=> Green 2126 // <4=> Yellow 2127 // <5=> Blue 2128 // <6=> Magenta 2129 // <7=> Cyan 2130 // <8=> White 2131 2132 #ifndef NRFX_WDT_CONFIG_INFO_COLOR 2133 #define NRFX_WDT_CONFIG_INFO_COLOR 0 2134 #endif 2135 2136 // <o> NRFX_WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. 2137 2138 // <0=> Default 2139 // <1=> Black 2140 // <2=> Red 2141 // <3=> Green 2142 // <4=> Yellow 2143 // <5=> Blue 2144 // <6=> Magenta 2145 // <7=> Cyan 2146 // <8=> White 2147 2148 #ifndef NRFX_WDT_CONFIG_DEBUG_COLOR 2149 #define NRFX_WDT_CONFIG_DEBUG_COLOR 0 2150 #endif 2151 2152 // </e> 2153 2154 // </e> 2155 2156 // </h> 2157 2158 #endif // NRFX_CONFIG_NRF5340_APPLICATION_H__ 2159
