1 /****************************************************************************** 2 * 3 * Copyright (c) 2014 The Android Open Source Project 4 * Copyright (C) 1999-2012 Broadcom Corporation 5 * 6 * Licensed under the Apache License, Version 2.0 (the "License"); 7 * you may not use this file except in compliance with the License. 8 * You may obtain a copy of the License at: 9 * 10 * http://www.apache.org/licenses/LICENSE-2.0 11 * 12 * Unless required by applicable law or agreed to in writing, software 13 * distributed under the License is distributed on an "AS IS" BASIS, 14 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 15 * See the License for the specific language governing permissions and 16 * limitations under the License. 17 * 18 ******************************************************************************/ 19 20 #ifndef BT_TARGET_H 21 #define BT_TARGET_H 22 23 #include <bt_common.h> 24 25 #ifndef BUILDCFG 26 #define BUILDCFG 27 #endif 28 29 /* 30 #if !defined(HAS_BDROID_BUILDCFG) && !defined(HAS_NO_BDROID_BUILDCFG) 31 #error "An Android.mk file did not include bdroid_CFLAGS and possibly not bdorid_C_INCLUDES" 32 #endif 33 */ 34 35 #ifdef HAS_BDROID_BUILDCFG 36 #include "bdroid_buildcfg.h" 37 #endif 38 39 #include "bluedroid_user_config.h" 40 #include "stack/bt_types.h" /* This must be defined AFTER buildcfg.h */ 41 42 #include "stack/dyn_mem.h" /* defines static and/or dynamic memory for components */ 43 44 45 /* OS Configuration from User config (eg: sdkconfig) */ 46 #define BT_BTU_TASK_STACK_SIZE UC_BTU_TASK_STACK_SIZE 47 48 /****************************************************************************** 49 ** 50 ** Classic BT features 51 ** 52 ******************************************************************************/ 53 #if (UC_BT_CLASSIC_ENABLED == TRUE) 54 #define CLASSIC_BT_INCLUDED TRUE 55 #define BTC_SM_INCLUDED TRUE 56 #define BTC_PRF_QUEUE_INCLUDED TRUE 57 #define BTC_GAP_BT_INCLUDED TRUE 58 #define BTA_SDP_INCLUDED TRUE 59 #define BTA_DM_PM_INCLUDED TRUE 60 #define BTC_DM_PM_INCLUDED TRUE 61 #define SDP_INCLUDED TRUE 62 #define BTA_DM_QOS_INCLUDED TRUE 63 64 #if (UC_BT_A2DP_ENABLED == TRUE) 65 #define BTA_AR_INCLUDED TRUE 66 #define BTA_AV_INCLUDED TRUE 67 #define AVDT_INCLUDED TRUE 68 #define A2D_INCLUDED TRUE 69 #define AVCT_INCLUDED TRUE 70 #define AVRC_INCLUDED TRUE 71 #define BTC_AV_INCLUDED TRUE 72 #define BTA_AV_SINK_INCLUDED TRUE 73 #define BTC_AV_SINK_INCLUDED TRUE 74 #define SBC_DEC_INCLUDED TRUE 75 #define BTC_AV_SRC_INCLUDED TRUE 76 #define SBC_ENC_INCLUDED TRUE 77 #endif /* UC_BT_A2DP_ENABLED */ 78 79 #if (UC_BT_SPP_ENABLED == TRUE) 80 #define RFCOMM_INCLUDED TRUE 81 #define BTA_JV_INCLUDED TRUE 82 #define BTA_JV_RFCOMM_INCLUDED TRUE 83 #define BTC_SPP_INCLUDED TRUE 84 #endif /* UC_BT_SPP_ENABLED */ 85 86 #if (UC_BT_L2CAP_ENABLED == TRUE) 87 #define BTA_JV_INCLUDED TRUE 88 #define BTC_L2CAP_INCLUDED TRUE 89 #define BTC_SDP_INCLUDED TRUE 90 #define VND_BT_JV_BTA_L2CAP TRUE 91 #endif /* UC_BT_L2CAP_ENABLED */ 92 93 #if (UC_BT_HFP_AG_ENABLED == TRUE) 94 #define BTC_HF_INCLUDED TRUE 95 #define BTA_AG_INCLUDED TRUE 96 #define PLC_INCLUDED TRUE 97 #define BTA_JV_RFCOMM_INCLUDED TRUE 98 #ifndef RFCOMM_INCLUDED 99 #define RFCOMM_INCLUDED TRUE 100 #endif 101 #ifndef BTM_SCO_INCLUDED 102 #define BTM_SCO_INCLUDED TRUE 103 #endif 104 #ifndef BTM_MAX_SCO_LINKS 105 #define BTM_MAX_SCO_LINKS (1) 106 #endif 107 #ifndef SBC_DEC_INCLUDED 108 #define SBC_DEC_INCLUDED TRUE 109 #endif 110 #ifndef SBC_ENC_INCLUDED 111 #define SBC_ENC_INCLUDED TRUE 112 #endif 113 #endif /* UC_BT_HFP_AG_ENABLED */ 114 115 #if (UC_BT_HFP_CLIENT_ENABLED == TRUE) 116 #define BTC_HF_CLIENT_INCLUDED TRUE 117 #define BTA_HF_INCLUDED TRUE 118 #define PLC_INCLUDED TRUE 119 #ifndef RFCOMM_INCLUDED 120 #define RFCOMM_INCLUDED TRUE 121 #endif 122 #ifndef BTM_SCO_INCLUDED 123 #define BTM_SCO_INCLUDED TRUE 124 #endif 125 #ifndef BTM_MAX_SCO_LINKS 126 #define BTM_MAX_SCO_LINKS (1) 127 #endif 128 129 #ifndef SBC_DEC_INCLUDED 130 #define SBC_DEC_INCLUDED TRUE 131 #endif 132 #ifndef SBC_ENC_INCLUDED 133 #define SBC_ENC_INCLUDED TRUE 134 #endif 135 #endif /* UC_BT_HFP_CLIENT_ENABLED */ 136 137 #if UC_BT_SSP_ENABLED 138 #define BT_SSP_INCLUDED TRUE 139 #endif /* UC_BT_SSP_ENABLED */ 140 141 #if UC_BT_HID_ENABLED 142 #define BT_HID_INCLUDED TRUE 143 #endif /* UC_BT_HID_ENABLED */ 144 145 #if UC_BT_HID_HOST_ENABLED 146 #define HID_HOST_INCLUDED TRUE 147 #define BTA_HH_INCLUDED TRUE 148 #define BTC_HH_INCLUDED TRUE 149 #endif /* UC_BT_HID_HOST_ENABLED */ 150 151 #if UC_BT_HID_DEVICE_ENABLED 152 #define HID_DEV_INCLUDED TRUE 153 #define BTA_HD_INCLUDED TRUE 154 #define BTC_HD_INCLUDED TRUE 155 #endif /* UC_BT_HID_DEVICE_ENABLED */ 156 157 #endif /* UC_BT_CLASSIC_ENABLED */ 158 159 /* This is set to enable use of GAP L2CAP connections. */ 160 #if (VND_BT_JV_BTA_L2CAP == TRUE) 161 #define BTA_JV_L2CAP_INCLUDED TRUE 162 #define GAP_CONN_INCLUDED TRUE 163 #endif /* VND_BT_JV_BTA_L2CAP */ 164 165 #ifndef CLASSIC_BT_INCLUDED 166 #define CLASSIC_BT_INCLUDED FALSE 167 #endif /* CLASSIC_BT_INCLUDED */ 168 169 #ifndef CLASSIC_BT_GATT_INCLUDED 170 #define CLASSIC_BT_GATT_INCLUDED FALSE 171 #endif /* CLASSIC_BT_GATT_INCLUDED */ 172 /****************************************************************************** 173 ** 174 ** BLE features 175 ** 176 ******************************************************************************/ 177 #if (UC_BT_BLE_ENABLED ==TRUE) 178 #define BLE_INCLUDED TRUE 179 #else 180 #define BLE_INCLUDED FALSE 181 #endif /* UC_BT_BLE_ENABLED */ 182 183 #if (UC_BT_BLE_50_FEATURES_SUPPORTED == TRUE) 184 #define BLE_50_FEATURE_SUPPORT TRUE 185 #else 186 #define BLE_50_FEATURE_SUPPORT FALSE 187 #endif 188 189 #if (UC_BT_BLE_42_FEATURES_SUPPORTED == TRUE || BLE_50_FEATURE_SUPPORT == FALSE) 190 #define BLE_42_FEATURE_SUPPORT TRUE 191 #else 192 #define BLE_42_FEATURE_SUPPORT FALSE 193 #endif 194 195 #if (UC_BT_BLE_RPA_SUPPORTED == TRUE) 196 #define CONTROLLER_RPA_LIST_ENABLE TRUE 197 #else 198 #define CONTROLLER_RPA_LIST_ENABLE FALSE 199 #endif 200 201 #if (UC_BT_GATTS_ENABLE) 202 #define GATTS_INCLUDED TRUE 203 #else 204 #define GATTS_INCLUDED FALSE 205 #endif /* UC_BT_GATTS_ENABLE */ 206 207 #if (UC_BT_GATTC_ENABLE) 208 #define GATTC_INCLUDED TRUE 209 #else 210 #define GATTC_INCLUDED FALSE 211 #endif /* UC_BT_GATTC_ENABLE */ 212 213 #if (UC_BT_GATTC_ENABLE && UC_BT_GATTC_CACHE_NVS_FLASH_ENABLED) 214 #define GATTC_CACHE_NVS TRUE 215 #else 216 #define GATTC_CACHE_NVS FALSE 217 #endif /* UC_BT_GATTC_ENABLE && UC_BT_GATTC_CACHE_NVS_FLASH_ENABLED */ 218 219 #if (UC_BT_GATTC_ENABLE && UC_BT_GATTC_CONNECT_RETRY_COUNT) 220 #define GATTC_CONNECT_RETRY_COUNT UC_BT_GATTC_CONNECT_RETRY_COUNT 221 #else 222 #define GATTC_CONNECT_RETRY_COUNT 0 223 #endif /* UC_BT_GATTC_ENABLE && UC_BT_GATTC_CONNECT_RETRY_COUNT */ 224 225 #if (GATTC_CONNECT_RETRY_COUNT > 0) 226 #define GATTC_CONNECT_RETRY_EN TRUE 227 #else 228 #define GATTC_CONNECT_RETRY_EN FALSE 229 #endif 230 231 #if (UC_BT_SMP_ENABLE) 232 #define SMP_INCLUDED TRUE 233 #if (BLE_INCLUDED == TRUE) 234 #define BLE_PRIVACY_SPT TRUE 235 #else 236 #define BLE_PRIVACY_SPT FALSE 237 #endif /*BLE_INCLUDED*/ 238 #else 239 #define SMP_INCLUDED FALSE 240 #define BLE_PRIVACY_SPT FALSE 241 #endif /* UC_BT_SMP_ENABLE */ 242 243 #if(UC_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE) 244 #define SMP_SLAVE_CON_PARAMS_UPD_ENABLE TRUE 245 #else 246 #define SMP_SLAVE_CON_PARAMS_UPD_ENABLE FALSE 247 #endif /* UC_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE */ 248 249 #ifdef UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP 250 #define BLE_ADV_REPORT_FLOW_CONTROL (UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP && BLE_INCLUDED) 251 #endif /* UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP */ 252 253 #ifdef UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM 254 #define BLE_ADV_REPORT_FLOW_CONTROL_NUM UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM 255 #endif /* UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM */ 256 257 #ifdef UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD 258 #define BLE_ADV_REPORT_DISCARD_THRSHOLD UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD 259 #endif /* UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD */ 260 261 #ifdef UC_BT_ACL_CONNECTIONS 262 #define MAX_ACL_CONNECTIONS UC_BT_ACL_CONNECTIONS 263 #define GATT_MAX_PHY_CHANNEL UC_BT_ACL_CONNECTIONS 264 #endif /* UC_BT_ACL_CONNECTIONS */ 265 266 #ifdef UC_BT_MULTI_CONNECTION_ENBALE 267 #define BT_MULTI_CONNECTION_ENBALE UC_BT_MULTI_CONNECTION_ENBALE 268 #endif 269 270 #if(BT_MULTI_CONNECTION_ENBALE && (CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3)) 271 #define BLE_CE_LEN_MIN 5 272 #else 273 #define BLE_CE_LEN_MIN 0 274 #endif 275 276 #ifdef UC_BT_BLE_ESTAB_LINK_CONN_TOUT 277 #define BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT UC_BT_BLE_ESTAB_LINK_CONN_TOUT 278 #endif 279 280 //------------------Added from bdroid_buildcfg.h--------------------- 281 #ifndef L2CAP_EXTFEA_SUPPORTED_MASK 282 #define L2CAP_EXTFEA_SUPPORTED_MASK (L2CAP_EXTFEA_ENH_RETRANS | L2CAP_EXTFEA_STREAM_MODE | L2CAP_EXTFEA_NO_CRC | L2CAP_EXTFEA_FIXED_CHNLS) 283 #endif 284 285 #ifndef BTUI_OPS_FORMATS 286 #define BTUI_OPS_FORMATS (BTA_OP_VCARD21_MASK | BTA_OP_ANY_MASK) 287 #endif 288 289 #ifndef BTA_RFC_MTU_SIZE 290 #define BTA_RFC_MTU_SIZE (L2CAP_MTU_SIZE-L2CAP_MIN_OFFSET-RFCOMM_DATA_OVERHEAD) 291 #endif 292 293 #ifndef SBC_NO_PCM_CPY_OPTION 294 #define SBC_NO_PCM_CPY_OPTION FALSE 295 #endif 296 297 #ifndef BT_APP_DEMO 298 #define BT_APP_DEMO TRUE 299 #endif 300 301 #ifndef BTIF_INCLUDED 302 #define BTIF_INCLUDED FALSE 303 #endif 304 305 /****************************************************************************** 306 ** 307 ** BTC-layer components 308 ** 309 ******************************************************************************/ 310 #ifndef BTC_GAP_BT_INCLUDED 311 #define BTC_GAP_BT_INCLUDED FALSE 312 #endif 313 314 #ifndef BTC_PRF_QUEUE_INCLUDED 315 #define BTC_PRF_QUEUE_INCLUDED FALSE 316 #endif 317 318 #ifndef BTC_SM_INCLUDED 319 #define BTC_SM_INCLUDED FALSE 320 #endif 321 322 #ifndef BTC_AV_INCLUDED 323 #define BTC_AV_INCLUDED FALSE 324 #endif 325 326 #ifndef BTC_AV_SINK_INCLUDED 327 #define BTC_AV_SINK_INCLUDED FALSE 328 #endif 329 330 #ifndef BTC_AV_SRC_INCLUDED 331 #define BTC_AV_SRC_INCLUDED FALSE 332 #endif 333 334 #ifndef BTC_SPP_INCLUDED 335 #define BTC_SPP_INCLUDED FALSE 336 #endif 337 338 #ifndef BTC_HH_INCLUDED 339 #define BTC_HH_INCLUDED FALSE 340 #endif 341 342 #ifndef BTC_HD_INCLUDED 343 #define BTC_HD_INCLUDED FALSE 344 #endif 345 346 #ifndef SBC_DEC_INCLUDED 347 #define SBC_DEC_INCLUDED FALSE 348 #endif 349 350 #ifndef SBC_ENC_INCLUDED 351 #define SBC_ENC_INCLUDED FALSE 352 #endif 353 354 /****************************************************************************** 355 ** 356 ** BTA-layer components 357 ** 358 ******************************************************************************/ 359 #ifndef BTA_INCLUDED 360 #define BTA_INCLUDED TRUE 361 #endif 362 363 #ifndef BTA_DM_PM_INCLUDED 364 #define BTA_DM_PM_INCLUDED FALSE 365 #endif 366 367 #ifndef BTA_DM_QOS_INCLUDED 368 #define BTA_DM_QOS_INCLUDED FALSE 369 #endif 370 371 #ifndef BTA_PAN_INCLUDED 372 #define BTA_PAN_INCLUDED FALSE 373 #endif 374 375 #ifndef BTA_HD_INCLUDED 376 #define BTA_HD_INCLUDED FALSE 377 #endif 378 379 #ifndef BTA_HH_INCLUDED 380 #define BTA_HH_INCLUDED FALSE 381 #endif 382 383 #ifndef BTA_HH_ROLE 384 #define BTA_HH_ROLE BTA_MASTER_ROLE_PREF 385 #endif 386 387 #ifndef BTA_HH_LE_INCLUDED 388 #define BTA_HH_LE_INCLUDED FALSE 389 #endif 390 391 #ifndef BTA_AR_INCLUDED 392 #define BTA_AR_INCLUDED FALSE 393 #endif 394 395 #ifndef BTA_AV_INCLUDED 396 #define BTA_AV_INCLUDED FALSE 397 #endif 398 399 #ifndef BTA_AV_SINK_INCLUDED 400 #define BTA_AV_SINK_INCLUDED FALSE 401 #endif 402 403 #ifndef BTA_JV_INCLUDED 404 #define BTA_JV_INCLUDED FALSE 405 #endif 406 407 #ifndef BTA_SDP_INCLUDED 408 #define BTA_SDP_INCLUDED FALSE 409 #endif 410 411 /* This is set to enable use of GAP L2CAP connections. */ 412 #ifndef VND_BT_JV_BTA_L2CAP 413 #define VND_BT_JV_BTA_L2CAP FALSE 414 #endif 415 416 #ifndef BTA_JV_L2CAP_INCLUDED 417 #define BTA_JV_L2CAP_INCLUDED FALSE 418 #endif 419 420 #ifndef GAP_CONN_INCLUDED 421 #define GAP_CONN_INCLUDED FALSE 422 #endif 423 424 /****************************************************************************** 425 ** 426 ** Stack-layer components 427 ** 428 ******************************************************************************/ 429 #ifndef AVCT_INCLUDED 430 #define AVCT_INCLUDED FALSE 431 #endif 432 433 #ifndef AVDT_INCLUDED 434 #define AVDT_INCLUDED FALSE 435 #endif 436 437 /****************************************************************************** 438 ** 439 ** Parameter Configurations for components 440 ** 441 ******************************************************************************/ 442 #ifndef BTA_DISABLE_DELAY 443 #define BTA_DISABLE_DELAY 200 /* in milliseconds */ 444 #endif 445 446 #ifndef BTA_SYS_TIMER_PERIOD 447 #define BTA_SYS_TIMER_PERIOD 100 448 #endif 449 450 #ifndef SBC_FOR_EMBEDDED_LINUX 451 #define SBC_FOR_EMBEDDED_LINUX TRUE 452 #endif 453 454 #ifndef AVDT_VERSION 455 #define AVDT_VERSION 0x0102 456 #endif 457 458 #ifndef BTA_AG_AT_MAX_LEN 459 #define BTA_AG_AT_MAX_LEN 512 460 #endif 461 462 #ifndef BTA_AVRCP_FF_RW_SUPPORT 463 #define BTA_AVRCP_FF_RW_SUPPORT FALSE 464 #endif 465 466 #ifndef BTA_AG_SCO_PKT_TYPES 467 #define BTA_AG_SCO_PKT_TYPES (BTM_SCO_LINK_ONLY_MASK | BTM_SCO_PKT_TYPES_MASK_EV3 | BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | BTM_SCO_PKT_TYPES_MASK_NO_3_EV5) 468 #endif 469 470 #ifndef BTA_AV_RET_TOUT 471 #define BTA_AV_RET_TOUT 15 472 #endif 473 474 #ifndef PORCHE_PAIRING_CONFLICT 475 #define PORCHE_PAIRING_CONFLICT TRUE 476 #endif 477 478 #ifndef BTA_AV_CO_CP_SCMS_T 479 #define BTA_AV_CO_CP_SCMS_T FALSE 480 #endif 481 482 #if UC_BT_BLE_HOST_QUEUE_CONGESTION_CHECK 483 #define SCAN_QUEUE_CONGEST_CHECK TRUE 484 #else 485 #define SCAN_QUEUE_CONGEST_CHECK FALSE 486 #endif 487 488 #ifdef UC_CONFIG_BT_GATTS_PPCP_CHAR_GAP 489 #define BTM_PERIPHERAL_ENABLED UC_CONFIG_BT_GATTS_PPCP_CHAR_GAP 490 #endif 491 492 #ifdef UC_BT_GATTS_SEND_SERVICE_CHANGE_MODE 493 #define GATTS_SEND_SERVICE_CHANGE_MODE UC_BT_GATTS_SEND_SERVICE_CHANGE_MODE 494 #endif 495 496 #if (UC_BT_GATTS_ROBUST_CACHING_ENABLED == TRUE) 497 #define GATTS_ROBUST_CACHING_ENABLED TRUE 498 #else 499 #define GATTS_ROBUST_CACHING_ENABLED FALSE 500 #endif 501 502 #if (UC_BT_GATTS_DEVICE_NAME_WRITABLE == TRUE) 503 #define GATTS_DEVICE_NAME_WRITABLE TRUE 504 #else 505 #define GATTS_DEVICE_NAME_WRITABLE FALSE 506 #endif 507 508 #if (UC_BT_GATTS_APPEARANCE_WRITABLE == TRUE) 509 #define GATTS_APPEARANCE_WRITABLE TRUE 510 #else 511 #define GATTS_APPEARANCE_WRITABLE FALSE 512 #endif 513 514 #ifdef UC_BT_BLE_ACT_SCAN_REP_ADV_SCAN 515 #define BTM_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY UC_BT_BLE_ACT_SCAN_REP_ADV_SCAN 516 #endif 517 518 #ifdef UC_BT_BLE_RPA_TIMEOUT 519 #define BTM_BLE_PRIVATE_ADDR_INT UC_BT_BLE_RPA_TIMEOUT 520 #endif 521 522 /* This feature is used to eanble interleaved scan*/ 523 #ifndef BTA_HOST_INTERLEAVE_SEARCH 524 #define BTA_HOST_INTERLEAVE_SEARCH FALSE 525 #endif 526 527 #ifndef BT_USE_TRACES 528 #define BT_USE_TRACES FALSE 529 #endif 530 531 #ifndef BT_TRACE_BTIF 532 #define BT_TRACE_BTIF TRUE 533 #endif 534 535 #ifndef BT_TRACE_VERBOSE 536 #define BT_TRACE_VERBOSE FALSE 537 #endif 538 539 #ifndef BTA_DM_SDP_DB_SIZE 540 #define BTA_DM_SDP_DB_SIZE 8000 541 #endif 542 543 #ifndef HL_INCLUDED 544 #define HL_INCLUDED TRUE 545 #endif 546 547 #ifndef AG_VOICE_SETTINGS 548 #define AG_VOICE_SETTINGS HCI_DEFAULT_VOICE_SETTINGS 549 #endif 550 551 #ifndef BTIF_DM_OOB_TEST 552 #define BTIF_DM_OOB_TEST FALSE 553 #endif 554 555 // How long to wait before activating sniff mode after entering the 556 // idle state for FTS, OPS connections 557 #ifndef BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS 558 #define BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS 7000 559 #endif 560 #ifndef BTA_FTC_OPS_IDLE_TO_SNIFF_DELAY_MS 561 #define BTA_FTC_OPS_IDLE_TO_SNIFF_DELAY_MS 5000 562 #endif 563 564 //------------------End added from bdroid_buildcfg.h--------------------- 565 566 567 /****************************************************************************** 568 ** 569 ** Buffer Size 570 ** 571 ******************************************************************************/ 572 573 #ifndef BT_DEFAULT_BUFFER_SIZE 574 #define BT_DEFAULT_BUFFER_SIZE (4096 + 16) 575 #endif 576 577 #ifndef BT_SMALL_BUFFER_SIZE 578 #define BT_SMALL_BUFFER_SIZE 660 579 #endif 580 581 /* Receives HCI events from the lower-layer. */ 582 #ifndef HCI_CMD_BUF_SIZE 583 #define HCI_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 584 #endif 585 586 /* Sends SDP data packets. */ 587 #ifndef SDP_DATA_BUF_SIZE 588 #define SDP_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 589 #endif 590 591 /* Sends RFCOMM command packets. */ 592 #ifndef RFCOMM_CMD_BUF_SIZE 593 #define RFCOMM_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 594 #endif 595 596 /* Sends RFCOMM data packets. */ 597 #ifndef RFCOMM_DATA_BUF_SIZE 598 #define RFCOMM_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 599 #endif 600 601 /* Sends L2CAP packets to the peer and HCI messages to the controller. */ 602 #ifndef L2CAP_CMD_BUF_SIZE 603 #define L2CAP_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 604 #endif 605 606 #ifndef L2CAP_USER_TX_BUF_SIZE 607 #define L2CAP_USER_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 608 #endif 609 610 #ifndef L2CAP_USER_RX_BUF_SIZE 611 #define L2CAP_USER_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 612 #endif 613 614 /* Sends L2CAP segmented packets in ERTM mode */ 615 #ifndef L2CAP_FCR_TX_BUF_SIZE 616 #define L2CAP_FCR_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 617 #endif 618 619 /* Receives L2CAP segmented packets in ERTM mode */ 620 #ifndef L2CAP_FCR_RX_BUF_SIZE 621 #define L2CAP_FCR_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 622 #endif 623 624 #ifndef L2CAP_FCR_ERTM_BUF_SIZE 625 #define L2CAP_FCR_ERTM_BUF_SIZE (10240 + 24) 626 #endif 627 628 /* Number of ACL buffers to assign to LE 629 if the HCI buffer pool is shared with BR/EDR */ 630 #ifndef L2C_DEF_NUM_BLE_BUF_SHARED 631 #define L2C_DEF_NUM_BLE_BUF_SHARED 1 632 #endif 633 634 /* Used by BTM when it sends HCI commands to the controller. */ 635 #ifndef BTM_CMD_BUF_SIZE 636 #define BTM_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 637 #endif 638 639 #ifndef OBX_LRG_DATA_BUF_SIZE 640 #define OBX_LRG_DATA_BUF_SIZE (8080 + 26) 641 #endif 642 643 /* Used to send data to L2CAP. */ 644 #ifndef GAP_DATA_BUF_SIZE 645 #define GAP_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 646 #endif 647 648 /* BNEP data and protocol messages. */ 649 #ifndef BNEP_BUF_SIZE 650 #define BNEP_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 651 #endif 652 653 /* AVDTP buffer size for protocol messages */ 654 #ifndef AVDT_CMD_BUF_SIZE 655 #define AVDT_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 656 #endif 657 658 /* AVDTP buffer size for media packets in case of fragmentation */ 659 #ifndef AVDT_DATA_BUF_SIZE 660 #define AVDT_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 661 #endif 662 663 #ifndef PAN_BUF_SIZE 664 #define PAN_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 665 #endif 666 667 /* Maximum number of buffers to allocate for PAN */ 668 #ifndef PAN_BUF_MAX 669 #define PAN_BUF_MAX 100 670 #endif 671 672 /* AVCTP buffer size for protocol messages */ 673 #ifndef AVCT_CMD_BUF_SIZE 674 #define AVCT_CMD_BUF_SIZE 288 675 #endif 676 677 /* AVRCP buffer size for protocol messages */ 678 #ifndef AVRC_CMD_BUF_SIZE 679 #define AVRC_CMD_BUF_SIZE 288 680 #endif 681 682 /* AVRCP Metadata buffer size for protocol messages */ 683 #ifndef AVRC_META_CMD_BUF_SIZE 684 #define AVRC_META_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 685 #endif 686 687 #ifndef BTA_HL_LRG_DATA_BUF_SIZE 688 #define BTA_HL_LRG_DATA_BUF_SIZE (10240 + 24) 689 #endif 690 691 /* GATT Server Database buffer size */ 692 #ifndef GATT_DB_BUF_SIZE 693 #define GATT_DB_BUF_SIZE 128 694 #endif 695 696 /* GATT Data sending buffer size */ 697 #ifndef GATT_DATA_BUF_SIZE 698 #define GATT_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 699 #endif 700 701 /****************************************************************************** 702 ** 703 ** HCI Services (H4) 704 ** 705 ******************************************************************************/ 706 707 /* Use 2 second for low-resolution systems, override to 1 for high-resolution systems */ 708 #ifndef BT_1SEC_TIMEOUT 709 #define BT_1SEC_TIMEOUT (2) 710 #endif 711 712 /* Quick Timer */ 713 /* if L2CAP_FCR_INCLUDED is TRUE then it should have 100 millisecond resolution */ 714 /* if none of them is included then QUICK_TIMER_TICKS_PER_SEC is set to 0 to exclude quick timer */ 715 #ifndef QUICK_TIMER_TICKS_PER_SEC 716 #define QUICK_TIMER_TICKS_PER_SEC 10 /* 100ms timer */ 717 #endif 718 719 /****************************************************************************** 720 ** 721 ** BTM 722 ** 723 ******************************************************************************/ 724 725 /* Cancel Inquiry on incoming SSP */ 726 #ifndef BTM_NO_SSP_ON_INQUIRY 727 #define BTM_NO_SSP_ON_INQUIRY FALSE 728 #endif 729 730 /* Includes SCO if TRUE */ 731 #ifndef BTM_SCO_INCLUDED 732 #define BTM_SCO_INCLUDED FALSE /* TRUE includes SCO code */ 733 #endif 734 735 /* Includes SCO if TRUE */ 736 #ifndef BTM_SCO_HCI_INCLUDED 737 #if UC_BT_HFP_AUDIO_DATA_PATH_HCI 738 #define BTM_SCO_HCI_INCLUDED TRUE /* TRUE includes SCO over HCI code */ 739 #else 740 #define BTM_SCO_HCI_INCLUDED FALSE 741 #endif /* UC_HFP_AUDIO_DATA_PATH_HCI */ 742 #endif 743 744 /* Includes WBS if TRUE */ 745 #ifndef BTM_WBS_INCLUDED 746 #define BTM_WBS_INCLUDED UC_BT_HFP_WBS_ENABLE /* TRUE includes WBS code */ 747 #endif 748 749 /* This is used to work around a controller bug that doesn't like Disconnect 750 ** issued while there is a role switch in progress 751 */ 752 #ifndef BTM_DISC_DURING_RS 753 #define BTM_DISC_DURING_RS TRUE 754 #endif 755 756 /************************** 757 ** Initial SCO TX credit 758 *************************/ 759 /* max TX SCO data packet size */ 760 #ifndef BTM_SCO_DATA_SIZE_MAX 761 #define BTM_SCO_DATA_SIZE_MAX 120 //240 762 #endif 763 764 /* max TX eSCO data packet size */ 765 #ifndef BTM_MSBC_FRAME_SIZE 766 #define BTM_MSBC_FRAME_SIZE 60 767 #endif 768 769 /* TX eSCO data packet size */ 770 #ifndef BTM_MSBC_FRAME_DATA_SIZE 771 #define BTM_MSBC_FRAME_DATA_SIZE 57 772 #endif 773 774 /* The size in bytes of the BTM inquiry database. 5 As Default */ 775 #ifndef BTM_INQ_DB_SIZE 776 #define BTM_INQ_DB_SIZE 5 777 #endif 778 779 /* The default scan mode */ 780 #ifndef BTM_DEFAULT_SCAN_TYPE 781 #define BTM_DEFAULT_SCAN_TYPE BTM_SCAN_TYPE_INTERLACED 782 #endif 783 784 /* Should connections to unknown devices be allowed when not discoverable? */ 785 #ifndef BTM_ALLOW_CONN_IF_NONDISCOVER 786 #define BTM_ALLOW_CONN_IF_NONDISCOVER TRUE 787 #endif 788 789 /* Sets the Page_Scan_Window: the length of time that the device is performing a page scan. */ 790 #ifndef BTM_DEFAULT_CONN_WINDOW 791 #define BTM_DEFAULT_CONN_WINDOW 0x0012 792 #endif 793 794 /* Sets the Page_Scan_Activity: the interval between the start of two consecutive page scans. */ 795 #ifndef BTM_DEFAULT_CONN_INTERVAL 796 #define BTM_DEFAULT_CONN_INTERVAL 0x0800 797 #endif 798 799 /* When automatic inquiry scan is enabled, this sets the inquiry scan window. */ 800 #ifndef BTM_DEFAULT_DISC_WINDOW 801 #define BTM_DEFAULT_DISC_WINDOW 0x0012 802 #endif 803 804 /* When automatic inquiry scan is enabled, this sets the inquiry scan interval. */ 805 #ifndef BTM_DEFAULT_DISC_INTERVAL 806 #define BTM_DEFAULT_DISC_INTERVAL 0x0800 807 #endif 808 809 /* 810 * {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS} 811 * 812 * SERVICE_CLASS:0x5A (Bit17 -Networking,Bit19 - Capturing,Bit20 -Object Transfer,Bit22 -Telephony) 813 * MAJOR_CLASS:0x02 - PHONE 814 * MINOR_CLASS:0x0C - SMART_PHONE 815 * 816 */ 817 #define BTA_DM_COD_SMARTPHONE {0x5A, 0x02, 0x0C} 818 819 /* 820 * {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS} 821 * 822 * SERVICE_CLASS:0x2C (Bit21 - Audio, Bit19 - Capturing) 823 * MAJOR_CLASS:0x04 - Audio/Video 824 * MINOR_CLASS:0x05 - LoudSpeaker 825 */ 826 #define BTA_DM_COD_LOUDSPEAKER {0x2C, 0x04, 0x14} 827 828 /* 829 * {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS} 830 * 831 * SERVICE_CLASS:0x00 None 832 * MAJOR_CLASS:0x1f - Uncategorized: device code not specified 833 * MINOR_CLASS:0x00 - None 834 */ 835 #define BTA_DM_COD_UNCLASSIFIED {0x00, 0x1f, 0x00} 836 837 /* Default class of device */ 838 #ifndef BTA_DM_COD 839 #define BTA_DM_COD BTA_DM_COD_UNCLASSIFIED 840 #endif 841 842 /* The number of SCO links. */ 843 #ifndef BTM_MAX_SCO_LINKS 844 #define BTM_MAX_SCO_LINKS 0 //3 845 #endif 846 847 /* The preferred type of SCO links (2-eSCO, 0-SCO). */ 848 #ifndef BTM_DEFAULT_SCO_MODE 849 #define BTM_DEFAULT_SCO_MODE 2 850 #endif 851 852 /* The number of security records for peer devices. 100 AS Default*/ 853 #ifndef BTM_SEC_MAX_DEVICE_RECORDS 854 #if SMP_INCLUDED == TRUE 855 #define BTM_SEC_MAX_DEVICE_RECORDS 15 // 100 856 #else 857 #define BTM_SEC_MAX_DEVICE_RECORDS 8 858 #endif /* SMP_INCLUDED == TRUE */ 859 #endif 860 861 /* The number of security records for services. 32 AS Default*/ 862 #ifndef BTM_SEC_MAX_SERVICE_RECORDS 863 #define BTM_SEC_MAX_SERVICE_RECORDS 8 // 32 864 #endif 865 866 /* If True, force a retrieval of remote device name for each bond in case it's changed */ 867 #ifndef BTM_SEC_FORCE_RNR_FOR_DBOND 868 #define BTM_SEC_FORCE_RNR_FOR_DBOND FALSE 869 #endif 870 871 /* Maximum device name length used in btm database. Up to 248*/ 872 #ifndef BTM_MAX_REM_BD_NAME_LEN 873 #define BTM_MAX_REM_BD_NAME_LEN 64 874 #endif 875 876 /* Maximum local device name length stored btm database. 877 '0' disables storage of the local name in BTM */ 878 #if UC_MAX_LOC_BD_NAME_LEN 879 #define BTM_MAX_LOC_BD_NAME_LEN UC_MAX_LOC_BD_NAME_LEN 880 #define BTC_MAX_LOC_BD_NAME_LEN BTM_MAX_LOC_BD_NAME_LEN 881 #else 882 #define BTM_MAX_LOC_BD_NAME_LEN 64 883 #define BTC_MAX_LOC_BD_NAME_LEN BTM_MAX_LOC_BD_NAME_LEN 884 #endif 885 886 /* Fixed Default String. When this is defined as null string, the device's 887 * product model name is used as the default local name. 888 */ 889 #ifndef BTM_DEF_LOCAL_NAME 890 #define BTM_DEF_LOCAL_NAME "" 891 #endif 892 893 /* Maximum service name stored with security authorization (0 if not needed) */ 894 #ifndef BTM_SEC_SERVICE_NAME_LEN 895 #define BTM_SEC_SERVICE_NAME_LEN BT_MAX_SERVICE_NAME_LEN 896 #endif 897 898 /* Maximum length of the service name. */ 899 #ifndef BT_MAX_SERVICE_NAME_LEN 900 #define BT_MAX_SERVICE_NAME_LEN 21 901 #endif 902 903 /* ACL buffer size in HCI Host Buffer Size command. */ 904 #ifndef BTM_ACL_BUF_SIZE 905 #define BTM_ACL_BUF_SIZE 0 906 #endif 907 908 /* The maximum number of clients that can register with the power manager. */ 909 #ifndef BTM_MAX_PM_RECORDS 910 #define BTM_MAX_PM_RECORDS 2 911 #endif 912 913 /* This is set to show debug trace messages for the power manager. */ 914 #ifndef BTM_PM_DEBUG 915 #define BTM_PM_DEBUG FALSE 916 #endif 917 918 /* This is set to TRUE if link is to be unparked due to BTM_CreateSCO API. */ 919 #ifndef BTM_SCO_WAKE_PARKED_LINK 920 #define BTM_SCO_WAKE_PARKED_LINK FALSE 921 #endif 922 923 /* If the user does not respond to security process requests within this many seconds, 924 * a negative response would be sent automatically. 925 * 30 is LMP response timeout value */ 926 #ifndef BTM_SEC_TIMEOUT_VALUE 927 #define BTM_SEC_TIMEOUT_VALUE 35 928 #endif 929 930 /* Maximum number of callbacks that can be registered using BTM_RegisterForVSEvents */ 931 #ifndef BTM_MAX_VSE_CALLBACKS 932 #define BTM_MAX_VSE_CALLBACKS 3 933 #endif 934 935 /****************************************** 936 ** Lisbon Features 937 *******************************************/ 938 /* This is set to TRUE if the FEC is required for EIR packet. */ 939 #ifndef BTM_EIR_DEFAULT_FEC_REQUIRED 940 #define BTM_EIR_DEFAULT_FEC_REQUIRED TRUE 941 #endif 942 943 /* The IO capability of the local device (for Simple Pairing) */ 944 #ifndef BTM_LOCAL_IO_CAPS 945 #define BTM_LOCAL_IO_CAPS BTM_IO_CAP_NONE 946 #endif 947 948 #ifndef BTM_LOCAL_IO_CAPS_BLE 949 #if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE) 950 #define BTM_LOCAL_IO_CAPS_BLE BTM_IO_CAP_KBDISP 951 #else 952 #define BTM_LOCAL_IO_CAPS_BLE 4 953 #endif ///BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 954 #endif 955 956 /* The default MITM Protection Requirement (for Simple Pairing) 957 * Possible values are BTM_AUTH_SP_YES or BTM_AUTH_SP_NO */ 958 #ifndef BTM_DEFAULT_AUTH_REQ 959 #define BTM_DEFAULT_AUTH_REQ BTM_AUTH_SP_NO 960 #endif 961 962 /* The default MITM Protection Requirement for dedicated bonding using Simple Pairing 963 * Possible values are BTM_AUTH_AP_YES or BTM_AUTH_AP_NO */ 964 #ifndef BTM_DEFAULT_DD_AUTH_REQ 965 #define BTM_DEFAULT_DD_AUTH_REQ BTM_AUTH_AP_YES 966 #endif 967 968 /* Include Out-of-Band implementation for Simple Pairing */ 969 #ifndef BTM_OOB_INCLUDED 970 #define BTM_OOB_INCLUDED TRUE 971 #endif 972 973 /* TRUE to include Sniff Subrating */ 974 #if (BTA_DM_PM_INCLUDED == TRUE) 975 #ifndef BTM_SSR_INCLUDED 976 #define BTM_SSR_INCLUDED TRUE 977 #endif 978 #endif /* BTA_DM_PM_INCLUDED */ 979 980 /************************* 981 ** End of Lisbon Features 982 **************************/ 983 984 /* 4.1/4.2 secure connections feature */ 985 #ifndef SC_MODE_INCLUDED 986 // Disable AES-CCM (BT 4.1) for BT Classic to workaround controller AES issue. E0 encryption (BT 4.0) will be used. 987 #define SC_MODE_INCLUDED FALSE 988 #endif 989 990 /* Used for conformance testing ONLY */ 991 #ifndef BTM_BLE_CONFORMANCE_TESTING 992 #define BTM_BLE_CONFORMANCE_TESTING FALSE 993 #endif 994 995 /****************************************************************************** 996 ** 997 ** CONTROLLER TO HOST FLOW CONTROL 998 ** 999 ******************************************************************************/ 1000 1001 #define C2H_FLOW_CONTROL_INCLUDED TRUE 1002 1003 /****************************************************************************** 1004 ** 1005 ** L2CAP 1006 ** 1007 ******************************************************************************/ 1008 1009 #ifndef L2CAP_CLIENT_INCLUDED 1010 #define L2CAP_CLIENT_INCLUDED FALSE 1011 #endif 1012 1013 /* The maximum number of simultaneous applications that can register with LE L2CAP. */ 1014 #ifndef BLE_MAX_L2CAP_CLIENTS 1015 #define BLE_MAX_L2CAP_CLIENTS 15 1016 #endif 1017 1018 /* Support status of L2CAP connection-oriented dynamic channels over LE transport with dynamic CID */ 1019 #ifndef BLE_L2CAP_COC_INCLUDED 1020 #define BLE_L2CAP_COC_INCLUDED FALSE // LE COC not use by default 1021 #endif 1022 1023 /* Support status of L2CAP connection-oriented dynamic channels over LE or BR/EDR transport with dynamic CID */ 1024 #ifndef L2CAP_COC_INCLUDED 1025 #if (CLASSIC_BT_INCLUDED == TRUE || BLE_L2CAP_COC_INCLUDED == TRUE) 1026 #define L2CAP_COC_INCLUDED TRUE 1027 #else 1028 #define L2CAP_COC_INCLUDED FALSE 1029 #endif 1030 #endif 1031 1032 /* The maximum number of simultaneous links that L2CAP can support. Up to 7*/ 1033 #ifndef MAX_ACL_CONNECTIONS 1034 #define MAX_L2CAP_LINKS 5 1035 #else 1036 #define MAX_L2CAP_LINKS MAX_ACL_CONNECTIONS 1037 #endif 1038 1039 /* The maximum number of simultaneous channels that L2CAP can support. Up to 16*/ 1040 #ifndef MAX_L2CAP_CHANNELS 1041 #if (CLASSIC_BT_INCLUDED == TRUE) 1042 #define MAX_L2CAP_CHANNELS 16 1043 #else 1044 #if (SMP_INCLUDED == FALSE) 1045 #define MAX_L2CAP_CHANNELS MAX_ACL_CONNECTIONS //This is used in the BLE client when start connected with the peer device 1046 #else 1047 #define MAX_L2CAP_CHANNELS (MAX_ACL_CONNECTIONS * 2) //This is used in the BLE client when start connected with the peer device and in SMP 1048 #endif ///SMP_INCLUDED == FALSE 1049 #endif ///CLASSIC_BT_INCLUDED == TRUE 1050 #endif ///MAX_L2CAP_CHANNELS 1051 1052 /* The maximum number of simultaneous applications that can register with L2CAP. */ 1053 #ifndef MAX_L2CAP_CLIENTS 1054 #if (CLASSIC_BT_INCLUDED == TRUE) 1055 #define MAX_L2CAP_CLIENTS 8 1056 #else 1057 #define MAX_L2CAP_CLIENTS 1 //Not support to allocate a channel control block in BLE only mode 1058 #endif ///CLASSIC_BT_INCLUDED == TRUE 1059 #endif 1060 1061 /* The number of seconds of link inactivity before a link is disconnected. */ 1062 #ifndef L2CAP_LINK_INACTIVITY_TOUT 1063 #define L2CAP_LINK_INACTIVITY_TOUT 4 1064 #endif 1065 1066 /* The number of seconds of link inactivity after bonding before a link is disconnected. */ 1067 #ifndef L2CAP_BONDING_TIMEOUT 1068 #define L2CAP_BONDING_TIMEOUT 3 1069 #endif 1070 1071 /* The time from the HCI connection complete to disconnect if no channel is established. */ 1072 #ifndef L2CAP_LINK_STARTUP_TOUT 1073 #define L2CAP_LINK_STARTUP_TOUT 60 1074 #endif 1075 1076 /* The L2CAP MTU; must be in accord with the HCI ACL pool size. */ 1077 #ifndef L2CAP_MTU_SIZE 1078 #define L2CAP_MTU_SIZE 1691 1079 #endif 1080 1081 /* The L2CAP MPS over Bluetooth; must be in accord with the FCR tx pool size and ACL down buffer size. */ 1082 #ifndef L2CAP_MPS_OVER_BR_EDR 1083 #define L2CAP_MPS_OVER_BR_EDR 1010 1084 #endif 1085 1086 /* If host flow control enabled, this is the number of buffers the controller can have unacknowledged. */ 1087 #ifndef L2CAP_HOST_FC_ACL_BUFS 1088 #define L2CAP_HOST_FC_ACL_BUFS 20 1089 #endif 1090 1091 /* This is set to enable L2CAP to take the ACL link out of park mode when ACL data is to be sent. */ 1092 #ifndef L2CAP_WAKE_PARKED_LINK 1093 #define L2CAP_WAKE_PARKED_LINK TRUE 1094 #endif 1095 1096 /* Whether link wants to be the master or the slave. */ 1097 #ifndef L2CAP_DESIRED_LINK_ROLE 1098 #define L2CAP_DESIRED_LINK_ROLE HCI_ROLE_SLAVE 1099 #endif 1100 1101 /* Include Non-Flushable Packet Boundary Flag feature of Lisbon */ 1102 #ifndef L2CAP_NON_FLUSHABLE_PB_INCLUDED 1103 #define L2CAP_NON_FLUSHABLE_PB_INCLUDED TRUE 1104 #endif 1105 1106 /* Minimum number of ACL credit for high priority link */ 1107 #ifndef L2CAP_HIGH_PRI_MIN_XMIT_QUOTA 1108 #define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA 5 1109 #endif 1110 1111 /* used for monitoring HCI ACL credit management */ 1112 #ifndef L2CAP_HCI_FLOW_CONTROL_DEBUG 1113 #define L2CAP_HCI_FLOW_CONTROL_DEBUG TRUE 1114 #endif 1115 1116 /* Used for calculating transmit buffers off of */ 1117 #ifndef L2CAP_NUM_XMIT_BUFFS 1118 #define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX 1119 #endif 1120 1121 /* Unicast Connectionless Data */ 1122 #ifndef L2CAP_UCD_INCLUDED 1123 #define L2CAP_UCD_INCLUDED FALSE 1124 #endif 1125 1126 /* Unicast Connectionless Data MTU */ 1127 #ifndef L2CAP_UCD_MTU 1128 #define L2CAP_UCD_MTU L2CAP_MTU_SIZE 1129 #endif 1130 1131 /* Unicast Connectionless Data Idle Timeout */ 1132 #ifndef L2CAP_UCD_IDLE_TIMEOUT 1133 #define L2CAP_UCD_IDLE_TIMEOUT 2 1134 #endif 1135 1136 /* Unicast Connectionless Data Idle Timeout */ 1137 #ifndef L2CAP_UCD_CH_PRIORITY 1138 #define L2CAP_UCD_CH_PRIORITY L2CAP_CHNL_PRIORITY_MEDIUM 1139 #endif 1140 1141 /* Used for features using fixed channels; set to zero if no fixed channels supported (BLE, etc.) */ 1142 /* Excluding L2CAP signaling channel and UCD */ 1143 #ifndef L2CAP_NUM_FIXED_CHNLS 1144 #if (CLASSIC_BT_INCLUDED == TRUE) 1145 #define L2CAP_NUM_FIXED_CHNLS 32 1146 #else 1147 #define L2CAP_NUM_FIXED_CHNLS 3 //There are just three fix channel in the BLE only mode(gatt,signal,smp) 1148 #endif ///CLASSIC_BT_INCLUDED == TRUE 1149 #endif 1150 1151 /* First fixed channel supported */ 1152 #ifndef L2CAP_FIRST_FIXED_CHNL 1153 #define L2CAP_FIRST_FIXED_CHNL 4 1154 #endif 1155 1156 #ifndef L2CAP_LAST_FIXED_CHNL 1157 #define L2CAP_LAST_FIXED_CHNL (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1) 1158 #endif 1159 1160 /* Round Robin service channels in link */ 1161 #ifndef L2CAP_ROUND_ROBIN_CHANNEL_SERVICE 1162 #define L2CAP_ROUND_ROBIN_CHANNEL_SERVICE TRUE 1163 #endif 1164 1165 /* Used for calculating transmit buffers off of */ 1166 #ifndef L2CAP_NUM_XMIT_BUFFS 1167 #define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX 1168 #endif 1169 1170 /* used for monitoring eL2CAP data flow */ 1171 #ifndef L2CAP_ERTM_STATS 1172 #define L2CAP_ERTM_STATS FALSE 1173 #endif 1174 1175 /* Used for conformance testing ONLY: When TRUE lets scriptwrapper overwrite info response */ 1176 #ifndef L2CAP_CONFORMANCE_TESTING 1177 #define L2CAP_CONFORMANCE_TESTING FALSE 1178 #endif 1179 1180 /* 1181 * Max bytes per connection to buffer locally before dropping the 1182 * connection if local client does not receive it - default is 1MB 1183 */ 1184 #ifndef L2CAP_MAX_RX_BUFFER 1185 #define L2CAP_MAX_RX_BUFFER 0x100000 1186 #endif 1187 1188 1189 #ifndef TIMER_PARAM_TYPE 1190 #define TIMER_PARAM_TYPE UINT32 1191 #endif 1192 1193 /****************************************************************************** 1194 ** 1195 ** BLE 1196 ** 1197 ******************************************************************************/ 1198 1199 #ifndef BLE_INCLUDED 1200 #define BLE_INCLUDED FALSE 1201 #endif 1202 1203 #ifndef BLE_ANDROID_CONTROLLER_SCAN_FILTER 1204 #define BLE_ANDROID_CONTROLLER_SCAN_FILTER TRUE 1205 #endif 1206 1207 #ifndef LOCAL_BLE_CONTROLLER_ID 1208 #define LOCAL_BLE_CONTROLLER_ID (1) 1209 #endif 1210 1211 /* 1212 * Toggles support for general LE privacy features such as remote address 1213 * resolution, local address rotation etc. 1214 */ 1215 #ifndef BLE_PRIVACY_SPT 1216 #define BLE_PRIVACY_SPT FALSE 1217 #endif 1218 1219 /* 1220 * Enables or disables support for local privacy (ex. address rotation) 1221 */ 1222 #ifndef BLE_LOCAL_PRIVACY_ENABLED 1223 #define BLE_LOCAL_PRIVACY_ENABLED TRUE 1224 #endif 1225 1226 /* 1227 * Toggles support for vendor specific extensions such as RPA offloading, 1228 * feature discovery, multi-adv etc. 1229 */ 1230 #ifndef BLE_VND_INCLUDED 1231 #define BLE_VND_INCLUDED FALSE 1232 #endif 1233 1234 #ifndef BTM_BLE_ADV_TX_POWER 1235 #ifdef CONFIG_IDF_TARGET_ESP32 1236 #define BTM_BLE_ADV_TX_POWER {-12, -9, -6, -3, 0, 3, 6, 9} 1237 #else 1238 #define BTM_BLE_ADV_TX_POWER {-24, -21, -18, -15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15, 18, 21} 1239 #endif 1240 #endif 1241 1242 #ifndef BTM_TX_POWER 1243 #ifdef CONFIG_IDF_TARGET_ESP32 1244 #define BTM_TX_POWER {-12, -9, -6, -3, 0, 3, 6, 9} 1245 #else 1246 #define BTM_TX_POWER {-24, -21, -18, -15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15, 18, 21} 1247 #endif 1248 #endif 1249 1250 #ifndef BTM_TX_POWER_LEVEL_MAX 1251 #ifdef CONFIG_IDF_TARGET_ESP32 1252 #define BTM_TX_POWER_LEVEL_MAX 7 1253 #else 1254 #define BTM_TX_POWER_LEVEL_MAX 15 1255 #endif 1256 #endif 1257 1258 1259 #ifndef BLE_BATCH_SCAN_INCLUDED 1260 #define BLE_BATCH_SCAN_INCLUDED TRUE 1261 #endif 1262 1263 /****************************************************************************** 1264 ** 1265 ** ATT/GATT Protocol/Profile Settings 1266 ** 1267 ******************************************************************************/ 1268 #ifndef GATT_INCLUDED 1269 #if BLE_INCLUDED == TRUE 1270 #define GATT_INCLUDED TRUE 1271 #else 1272 #define GATT_INCLUDED FALSE 1273 #endif 1274 #endif 1275 1276 #ifndef BTA_GATT_INCLUDED 1277 #if BLE_INCLUDED == TRUE 1278 #define BTA_GATT_INCLUDED TRUE 1279 #else 1280 #define BTA_GATT_INCLUDED FALSE 1281 #endif 1282 #endif 1283 1284 #if BTA_GATT_INCLUDED == TRUE && BLE_INCLUDED == FALSE 1285 #error "can't have GATT without BLE" 1286 #endif 1287 1288 #ifndef BLE_LLT_INCLUDED 1289 #define BLE_LLT_INCLUDED TRUE 1290 #endif 1291 1292 /* Added this marco to fixed the android 7.0 will lead to update connection parameters 1293 collision when the slave sent the HCI_BLE_UPD_LL_CONN_PARAMS comment to the controller 1294 request the master to update connection parameters directly. */ 1295 #ifndef BLE_SLAVE_UPD_CONN_PARAMS 1296 #define BLE_SLAVE_UPD_CONN_PARAMS FALSE 1297 #endif 1298 1299 #ifndef ATT_INCLUDED 1300 #define ATT_INCLUDED TRUE 1301 #endif 1302 1303 #ifndef ATT_DEBUG 1304 #define ATT_DEBUG FALSE 1305 #endif 1306 1307 #ifndef BLE_PERIPHERAL_MODE_SUPPORT 1308 #define BLE_PERIPHERAL_MODE_SUPPORT TRUE 1309 #endif 1310 1311 #ifndef BLE_DELAY_REQUEST_ENC 1312 /* This flag is to work around IPHONE problem, We need to wait for iPhone ready 1313 before send encryption request to iPhone */ 1314 #define BLE_DELAY_REQUEST_ENC FALSE 1315 #endif 1316 1317 #ifndef GAP_TRANSPORT_SUPPORTED 1318 #define GAP_TRANSPORT_SUPPORTED GATT_TRANSPORT_LE_BR_EDR 1319 #endif 1320 1321 #ifndef GATTP_TRANSPORT_SUPPORTED 1322 #define GATTP_TRANSPORT_SUPPORTED GATT_TRANSPORT_LE_BR_EDR 1323 #endif 1324 1325 #ifndef GATT_MAX_SR_PROFILES 1326 #define GATT_MAX_SR_PROFILES UC_CONFIG_BT_GATT_MAX_SR_PROFILES 1327 #endif 1328 1329 #ifndef GATT_MAX_APPS 1330 #define GATT_MAX_APPS 8 /* MAX is 32 note: 2 apps used internally GATT and GAP */ 1331 #endif 1332 1333 #ifndef GATT_MAX_PHY_CHANNEL 1334 #define GATT_MAX_PHY_CHANNEL 7 1335 #endif 1336 1337 /* Used for conformance testing ONLY */ 1338 #ifndef GATT_CONFORMANCE_TESTING 1339 #define GATT_CONFORMANCE_TESTING FALSE 1340 #endif 1341 1342 /* number of background connection device allowence, ideally to be the same as WL size 1343 */ 1344 #ifndef GATT_MAX_BG_CONN_DEV 1345 #define GATT_MAX_BG_CONN_DEV 8 /*MAX is 32*/ 1346 #endif 1347 1348 /****************************************************************************** 1349 ** 1350 ** GATT 1351 ** 1352 ******************************************************************************/ 1353 #ifndef GATTC_INCLUDED 1354 #if BLE_INCLUDED == TRUE 1355 #define GATTC_INCLUDED FALSE 1356 #else 1357 #define GATTC_INCLUDED FALSE 1358 #endif 1359 #endif 1360 1361 #ifndef GATTS_INCLUDED 1362 #if BLE_INCLUDED == TRUE 1363 #define GATTS_INCLUDED TRUE 1364 #else 1365 #define GATTS_INCLUDED FALSE 1366 #endif 1367 #endif 1368 1369 /****************************************************************************** 1370 ** 1371 ** SMP 1372 ** 1373 ******************************************************************************/ 1374 #ifndef SMP_INCLUDED 1375 #if BLE_INCLUDED == TRUE 1376 #define SMP_INCLUDED FALSE 1377 #else 1378 #define SMP_INCLUDED FALSE 1379 #endif 1380 #endif 1381 1382 #ifndef SMP_DEBUG 1383 #define SMP_DEBUG FALSE 1384 #endif 1385 1386 #ifndef SMP_DEFAULT_AUTH_REQ 1387 #define SMP_DEFAULT_AUTH_REQ SMP_AUTH_NB_ENC_ONLY 1388 #endif 1389 1390 #ifndef SMP_MAX_ENC_KEY_SIZE 1391 #define SMP_MAX_ENC_KEY_SIZE 16 1392 #endif 1393 1394 #ifndef SMP_MIN_ENC_KEY_SIZE 1395 #define SMP_MIN_ENC_KEY_SIZE 7 1396 #endif 1397 1398 /* minimum link timeout after SMP pairing is done, leave room for key exchange 1399 and racing condition for the following service connection. 1400 Prefer greater than 0 second, and no less than default inactivity link idle 1401 timer(L2CAP_LINK_INACTIVITY_TOUT) in l2cap) */ 1402 #ifndef SMP_LINK_TOUT_MIN 1403 #if (L2CAP_LINK_INACTIVITY_TOUT > 0) 1404 #define SMP_LINK_TOUT_MIN L2CAP_LINK_INACTIVITY_TOUT 1405 #else 1406 #define SMP_LINK_TOUT_MIN 2 1407 #endif 1408 #endif 1409 1410 /****************************************************************************** 1411 ** 1412 ** BT_SSP 1413 ** 1414 ******************************************************************************/ 1415 #ifndef BT_SSP_INCLUDED 1416 #define BT_SSP_INCLUDED FALSE 1417 #endif 1418 1419 #if BT_SSP_INCLUDED == TRUE && CLASSIC_BT_INCLUDED == FALSE 1420 #error "Can't have SSP without CLASSIC BT" 1421 #endif 1422 1423 /****************************************************************************** 1424 ** 1425 ** SDP 1426 ** 1427 ******************************************************************************/ 1428 1429 #ifndef SDP_INCLUDED 1430 #define SDP_INCLUDED FALSE 1431 #endif 1432 1433 /* This is set to enable SDP server functionality. */ 1434 #ifndef SDP_SERVER_ENABLED 1435 #if SDP_INCLUDED == TRUE 1436 #define SDP_SERVER_ENABLED TRUE 1437 #else 1438 #define SDP_SERVER_ENABLED FALSE 1439 #endif 1440 #endif 1441 1442 /* This is set to enable SDP client functionality. */ 1443 #ifndef SDP_CLIENT_ENABLED 1444 #if SDP_INCLUDED == TRUE 1445 #define SDP_CLIENT_ENABLED TRUE 1446 #else 1447 #define SDP_CLIENT_ENABLED FALSE 1448 #endif 1449 #endif 1450 1451 /* The maximum number of SDP records the server can support. */ 1452 #ifndef SDP_MAX_RECORDS 1453 #define SDP_MAX_RECORDS 6 /*max is 30*/ 1454 #endif 1455 1456 /* The maximum number of attributes in each record. */ 1457 #ifndef SDP_MAX_REC_ATTR 1458 #if (defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE)) || (defined(BTC_SDP_INCLUDED) && (BTC_SDP_INCLUDED==TRUE)) 1459 #define SDP_MAX_REC_ATTR 25 1460 #else 1461 #define SDP_MAX_REC_ATTR 8 1462 #endif /* defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE) */ 1463 #endif 1464 1465 #ifndef SDP_MAX_PAD_LEN 1466 #define SDP_MAX_PAD_LEN 300 1467 #endif 1468 1469 /* The maximum length, in bytes, of an attribute. */ 1470 #ifndef SDP_MAX_ATTR_LEN 1471 #define SDP_MAX_ATTR_LEN 400 1472 #endif 1473 1474 /* The maximum number of attribute filters supported by SDP databases. */ 1475 #ifndef SDP_MAX_ATTR_FILTERS 1476 #define SDP_MAX_ATTR_FILTERS 15 1477 #endif 1478 1479 /* The maximum number of UUID filters supported by SDP databases. */ 1480 #ifndef SDP_MAX_UUID_FILTERS 1481 #define SDP_MAX_UUID_FILTERS 3 1482 #endif 1483 1484 /* The maximum number of record handles retrieved in a search. */ 1485 #ifndef SDP_MAX_DISC_SERVER_RECS 1486 #define SDP_MAX_DISC_SERVER_RECS 21 1487 #endif 1488 1489 /* The size of a scratchpad buffer, in bytes, for storing the response to an attribute request. */ 1490 #ifndef SDP_MAX_LIST_BYTE_COUNT 1491 #define SDP_MAX_LIST_BYTE_COUNT 4096 1492 #endif 1493 1494 /* The maximum number of parameters in an SDP protocol element. */ 1495 #ifndef SDP_MAX_PROTOCOL_PARAMS 1496 #define SDP_MAX_PROTOCOL_PARAMS 2 1497 #endif 1498 1499 /* The maximum number of simultaneous client and server connections. */ 1500 #ifndef SDP_MAX_CONNECTIONS 1501 #define SDP_MAX_CONNECTIONS 2 // 4 1502 #endif 1503 1504 /* The MTU size for the L2CAP configuration. */ 1505 #ifndef SDP_MTU_SIZE 1506 #define SDP_MTU_SIZE 672 1507 #endif 1508 1509 /* The flush timeout for the L2CAP configuration. */ 1510 #ifndef SDP_FLUSH_TO 1511 #define SDP_FLUSH_TO 0xFFFF 1512 #endif 1513 1514 /* The name for security authorization. */ 1515 #ifndef SDP_SERVICE_NAME 1516 #define SDP_SERVICE_NAME "Service Discovery" 1517 #endif 1518 1519 /* The security level for BTM. */ 1520 #ifndef SDP_SECURITY_LEVEL 1521 #define SDP_SECURITY_LEVEL BTM_SEC_NONE 1522 #endif 1523 1524 /****************************************************************************** 1525 ** 1526 ** RFCOMM 1527 ** 1528 ******************************************************************************/ 1529 #ifndef RFCOMM_INCLUDED 1530 #define RFCOMM_INCLUDED FALSE 1531 #endif 1532 1533 #ifndef BTA_JV_RFCOMM_INCLUDED 1534 #define BTA_JV_RFCOMM_INCLUDED FALSE 1535 #endif 1536 1537 /* The maximum number of ports supported. */ 1538 #ifndef MAX_RFC_PORTS 1539 #define MAX_RFC_PORTS 8 /*max is 30*/ 1540 #endif 1541 1542 /* The maximum simultaneous links to different devices. */ 1543 #ifndef MAX_ACL_CONNECTIONS 1544 #define MAX_BD_CONNECTIONS 3 /*max is 7*/ 1545 #else 1546 #define MAX_BD_CONNECTIONS MAX_ACL_CONNECTIONS 1547 #endif 1548 1549 /* The port receive queue low watermark level, in bytes. */ 1550 #ifndef PORT_RX_LOW_WM 1551 #define PORT_RX_LOW_WM (BTA_RFC_MTU_SIZE * PORT_RX_BUF_LOW_WM) 1552 #endif 1553 1554 /* The port receive queue high watermark level, in bytes. */ 1555 #ifndef PORT_RX_HIGH_WM 1556 #define PORT_RX_HIGH_WM (BTA_RFC_MTU_SIZE * PORT_RX_BUF_HIGH_WM) 1557 #endif 1558 1559 /* The port receive queue critical watermark level, in bytes. */ 1560 #ifndef PORT_RX_CRITICAL_WM 1561 #define PORT_RX_CRITICAL_WM (BTA_RFC_MTU_SIZE * PORT_RX_BUF_CRITICAL_WM) 1562 #endif 1563 1564 /* The port receive queue low watermark level, in number of buffers. */ 1565 #ifndef PORT_RX_BUF_LOW_WM 1566 #define PORT_RX_BUF_LOW_WM 4 1567 #endif 1568 1569 /* The port receive queue high watermark level, in number of buffers. */ 1570 #ifndef PORT_RX_BUF_HIGH_WM 1571 #define PORT_RX_BUF_HIGH_WM 10 1572 #endif 1573 1574 /* The port receive queue critical watermark level, in number of buffers. */ 1575 #ifndef PORT_RX_BUF_CRITICAL_WM 1576 #define PORT_RX_BUF_CRITICAL_WM 15 1577 #endif 1578 1579 /* The port transmit queue high watermark level, in bytes. */ 1580 #ifndef PORT_TX_HIGH_WM 1581 #define PORT_TX_HIGH_WM (BTA_RFC_MTU_SIZE * PORT_TX_BUF_HIGH_WM) 1582 #endif 1583 1584 /* The port transmit queue critical watermark level, in bytes. */ 1585 #ifndef PORT_TX_CRITICAL_WM 1586 #define PORT_TX_CRITICAL_WM (BTA_RFC_MTU_SIZE * PORT_TX_BUF_CRITICAL_WM) 1587 #endif 1588 1589 /* The port transmit queue high watermark level, in number of buffers. */ 1590 #ifndef PORT_TX_BUF_HIGH_WM 1591 #define PORT_TX_BUF_HIGH_WM 10 1592 #endif 1593 1594 /* The port transmit queue high watermark level, in number of buffers. */ 1595 #ifndef PORT_TX_BUF_CRITICAL_WM 1596 #define PORT_TX_BUF_CRITICAL_WM 15 1597 #endif 1598 1599 /* The RFCOMM multiplexer preferred flow control mechanism. */ 1600 #ifndef PORT_FC_DEFAULT 1601 #define PORT_FC_DEFAULT PORT_FC_CREDIT 1602 #endif 1603 1604 /* The maximum number of credits receiver sends to peer when using credit-based flow control. */ 1605 #ifndef PORT_CREDIT_RX_MAX 1606 #define PORT_CREDIT_RX_MAX 16 1607 #endif 1608 1609 /* The credit low watermark level. */ 1610 #ifndef PORT_CREDIT_RX_LOW 1611 #define PORT_CREDIT_RX_LOW 8 1612 #endif 1613 1614 /* ERTM Tx window size */ 1615 #ifndef RFC_FCR_OPT_TX_WINDOW_SIZE 1616 #define RFC_FCR_OPT_TX_WINDOW_SIZE 10 1617 #endif 1618 1619 /* ERTM Maximum transmissions before disconnecting */ 1620 #ifndef RFC_FCR_OPT_MAX_TX_B4_DISCNT 1621 #define RFC_FCR_OPT_MAX_TX_B4_DISCNT 20 1622 #endif 1623 1624 /* ERTM Retransmission timeout (2 secs) */ 1625 #ifndef RFC_FCR_OPT_RETX_TOUT 1626 #define RFC_FCR_OPT_RETX_TOUT 2000 1627 #endif 1628 1629 /* ERTM Monitor timeout (12 secs) */ 1630 #ifndef RFC_FCR_OPT_MONITOR_TOUT 1631 #define RFC_FCR_OPT_MONITOR_TOUT 12000 1632 #endif 1633 1634 /* ERTM ERTM MPS segment size */ 1635 #ifndef RFC_FCR_OPT_MAX_PDU_SIZE 1636 #define RFC_FCR_OPT_MAX_PDU_SIZE 1010 1637 #endif 1638 1639 /****************************************************************************** 1640 ** 1641 ** OBEX 1642 ** 1643 ******************************************************************************/ 1644 1645 /* 1646 * Buffer size to reassemble the SDU. 1647 * It will allow buffers to be used that are larger than the L2CAP_MAX_MTU. 1648 */ 1649 #ifndef OBX_USER_RX_BUF_SIZE 1650 #define OBX_USER_RX_BUF_SIZE OBX_LRG_DATA_BUF_SIZE 1651 #endif 1652 1653 /* 1654 * Buffer size to hold the SDU. 1655 * It will allow buffers to be used that are larger than the L2CAP_MAX_MTU. 1656 */ 1657 #ifndef OBX_USER_TX_BUF_SIZE 1658 #define OBX_USER_TX_BUF_SIZE OBX_LRG_DATA_BUF_SIZE 1659 #endif 1660 1661 /* Buffer size used to hold MPS segments during SDU reassembly. */ 1662 #ifndef OBX_FCR_RX_BUF_SIZE 1663 #define OBX_FCR_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 1664 #endif 1665 1666 /* 1667 * Buffer size used to hold MPS segments used in (re)transmissions. 1668 * The size of each buffer must be able to hold the maximum MPS segment size 1669 * passed in L2CA_SetFCROptions plus BT_HDR (8) + HCI preamble (4) + 1670 * L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). 1671 */ 1672 #ifndef OBX_FCR_TX_BUF_SIZE 1673 #define OBX_FCR_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 1674 #endif 1675 1676 /* 1677 * Size of the transmission window when using enhanced retransmission mode. Not used 1678 * in basic and streaming modes. Range: 1 - 63 1679 */ 1680 #ifndef OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR 1681 #define OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR 20 1682 #endif 1683 1684 /* 1685 * Number of transmission attempts for a single I-Frame before taking 1686 * Down the connection. Used In ERTM mode only. Value is Ignored in basic and 1687 * Streaming modes. 1688 * Range: 0, 1-0xFF 1689 * 0 - infinite retransmissions 1690 * 1 - single transmission 1691 */ 1692 #ifndef OBX_FCR_OPT_MAX_TX_B4_DISCNT 1693 #define OBX_FCR_OPT_MAX_TX_B4_DISCNT 20 1694 #endif 1695 1696 /* 1697 * Retransmission Timeout 1698 * Range: Minimum 2000 (2 secs) on BR/EDR when supporting PBF. 1699 */ 1700 #ifndef OBX_FCR_OPT_RETX_TOUT 1701 #define OBX_FCR_OPT_RETX_TOUT 2000 1702 #endif 1703 1704 /* 1705 * Monitor Timeout 1706 * Range: Minimum 12000 (12 secs) on BR/EDR when supporting PBF. 1707 */ 1708 #ifndef OBX_FCR_OPT_MONITOR_TOUT 1709 #define OBX_FCR_OPT_MONITOR_TOUT 12000 1710 #endif 1711 1712 /* 1713 * Maximum PDU payload size. 1714 * Suggestion: The maximum amount of data that will fit into a 3-DH5 packet. 1715 * Range: 2 octets 1716 */ 1717 #ifndef OBX_FCR_OPT_MAX_PDU_SIZE 1718 #define OBX_FCR_OPT_MAX_PDU_SIZE L2CAP_MPS_OVER_BR_EDR 1719 #endif 1720 1721 /* 1722 * Pool ID where to reassemble the SDU. 1723 * This Pool will allow buffers to be used that are larger than 1724 * the L2CAP_MAX_MTU. 1725 */ 1726 #ifndef OBX_USER_RX_POOL_ID 1727 #define OBX_USER_RX_POOL_ID 4 1728 #endif 1729 1730 /* 1731 * Pool ID where to hold the SDU. 1732 * This Pool will allow buffers to be used that are larger than 1733 * the L2CAP_MAX_MTU. 1734 */ 1735 #ifndef OBX_USER_TX_POOL_ID 1736 #define OBX_USER_TX_POOL_ID 4 1737 #endif 1738 1739 /* 1740 * GKI Buffer Pool ID used to hold MPS segments during SDU reassembly 1741 */ 1742 #ifndef OBX_FCR_RX_POOL_ID 1743 #define OBX_FCR_RX_POOL_ID 3 1744 #endif 1745 1746 /* 1747 * Pool ID used to hold MPS segments used in (re)transmissions. 1748 * L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool. 1749 * Note: This pool needs to have enough buffers to hold two times the window size negotiated 1750 * in the L2CA_SetFCROptions (2 * tx_win_size) to allow for retransmissions. 1751 * The size of each buffer must be able to hold the maximum MPS segment size passed in 1752 * L2CA_SetFCROptions plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). 1753 */ 1754 #ifndef OBX_FCR_TX_POOL_ID 1755 #define OBX_FCR_TX_POOL_ID 3 1756 #endif 1757 1758 1759 /****************************************************************************** 1760 ** 1761 ** BNEP 1762 ** 1763 ******************************************************************************/ 1764 1765 #ifndef BNEP_INCLUDED 1766 #define BNEP_INCLUDED FALSE 1767 #endif 1768 1769 /* BNEP status API call is used mainly to get the L2CAP handle */ 1770 #ifndef BNEP_SUPPORTS_STATUS_API 1771 #define BNEP_SUPPORTS_STATUS_API FALSE 1772 #endif 1773 1774 /* 1775 ** When BNEP connection changes roles after the connection is established 1776 ** we will do an authentication check again on the new role 1777 */ 1778 #ifndef BNEP_DO_AUTH_FOR_ROLE_SWITCH 1779 #define BNEP_DO_AUTH_FOR_ROLE_SWITCH FALSE 1780 #endif 1781 1782 1783 /* Maximum number of protocol filters supported. */ 1784 #ifndef BNEP_MAX_PROT_FILTERS 1785 #define BNEP_MAX_PROT_FILTERS 5 1786 #endif 1787 1788 /* Maximum number of multicast filters supported. */ 1789 #ifndef BNEP_MAX_MULTI_FILTERS 1790 #define BNEP_MAX_MULTI_FILTERS 5 1791 #endif 1792 1793 /* Minimum MTU size. */ 1794 #ifndef BNEP_MIN_MTU_SIZE 1795 #define BNEP_MIN_MTU_SIZE L2CAP_MTU_SIZE 1796 #endif 1797 1798 /* Preferred MTU size. */ 1799 #ifndef BNEP_MTU_SIZE 1800 #define BNEP_MTU_SIZE BNEP_MIN_MTU_SIZE 1801 #endif 1802 1803 /* Maximum number of buffers allowed in transmit data queue. */ 1804 #ifndef BNEP_MAX_XMITQ_DEPTH 1805 #define BNEP_MAX_XMITQ_DEPTH 20 1806 #endif 1807 1808 /* Maximum number BNEP of connections supported. */ 1809 #ifndef BNEP_MAX_CONNECTIONS 1810 #define BNEP_MAX_CONNECTIONS 7 1811 #endif 1812 1813 1814 /****************************************************************************** 1815 ** 1816 ** AVDTP 1817 ** 1818 ******************************************************************************/ 1819 1820 #ifndef AVDT_INCLUDED 1821 #define AVDT_INCLUDED TRUE 1822 #endif 1823 1824 /* Include reporting capability in AVDTP */ 1825 #ifndef AVDT_REPORTING 1826 #define AVDT_REPORTING TRUE 1827 #endif 1828 1829 /* Include multiplexing capability in AVDTP */ 1830 #ifndef AVDT_MULTIPLEXING 1831 #define AVDT_MULTIPLEXING TRUE 1832 #endif 1833 1834 /* Number of simultaneous links to different peer devices. */ 1835 #ifndef AVDT_NUM_LINKS 1836 #define AVDT_NUM_LINKS 2 1837 #endif 1838 1839 /* Number of simultaneous stream endpoints. */ 1840 #ifndef AVDT_NUM_SEPS 1841 #define AVDT_NUM_SEPS 3 1842 #endif 1843 1844 /* Number of transport channels setup per media stream(audio or video) */ 1845 #ifndef AVDT_NUM_CHANNELS 1846 1847 #if AVDT_REPORTING == TRUE 1848 /* signaling, media and reporting channels */ 1849 #define AVDT_NUM_CHANNELS 3 1850 #else 1851 /* signaling and media channels */ 1852 #define AVDT_NUM_CHANNELS 2 1853 #endif // AVDT_REPORTING 1854 1855 #endif // AVDT_NUM_CHANNELS 1856 1857 /* Number of transport channels setup by AVDT for all media streams 1858 * AVDT_NUM_CHANNELS * Number of simultaneous streams. 1859 */ 1860 #ifndef AVDT_NUM_TC_TBL 1861 #define AVDT_NUM_TC_TBL 6 1862 #endif 1863 1864 /* Maximum size in bytes of the codec capabilities information element. */ 1865 #ifndef AVDT_CODEC_SIZE 1866 #define AVDT_CODEC_SIZE 10 1867 #endif 1868 1869 /* Maximum size in bytes of the content protection information element. */ 1870 #ifndef AVDT_PROTECT_SIZE 1871 #define AVDT_PROTECT_SIZE 90 1872 #endif 1873 1874 /* Maximum number of GKI buffers in the fragment queue (for video frames). 1875 * Must be less than the number of buffers in the buffer pool of size AVDT_DATA_POOL_SIZE */ 1876 #ifndef AVDT_MAX_FRAG_COUNT 1877 #define AVDT_MAX_FRAG_COUNT 15 1878 #endif 1879 1880 /****************************************************************************** 1881 ** 1882 ** PAN 1883 ** 1884 ******************************************************************************/ 1885 1886 #ifndef PAN_INCLUDED 1887 #define PAN_INCLUDED FALSE 1888 #endif 1889 1890 /* This will enable the PANU role */ 1891 #ifndef PAN_SUPPORTS_ROLE_PANU 1892 #define PAN_SUPPORTS_ROLE_PANU FALSE 1893 #endif 1894 1895 /* This will enable the GN role */ 1896 #ifndef PAN_SUPPORTS_ROLE_GN 1897 #define PAN_SUPPORTS_ROLE_GN FALSE 1898 #endif 1899 1900 /* This will enable the NAP role */ 1901 #ifndef PAN_SUPPORTS_ROLE_NAP 1902 #define PAN_SUPPORTS_ROLE_NAP FALSE 1903 #endif 1904 1905 /* This is just for debugging purposes */ 1906 #ifndef PAN_SUPPORTS_DEBUG_DUMP 1907 #define PAN_SUPPORTS_DEBUG_DUMP FALSE 1908 #endif 1909 1910 /* Maximum number of PAN connections allowed */ 1911 #ifndef MAX_PAN_CONNS 1912 #define MAX_PAN_CONNS 7 1913 #endif 1914 1915 /* Default service name for NAP role */ 1916 #ifndef PAN_NAP_DEFAULT_SERVICE_NAME 1917 #define PAN_NAP_DEFAULT_SERVICE_NAME "Network Access Point Service" 1918 #endif 1919 1920 /* Default service name for GN role */ 1921 #ifndef PAN_GN_DEFAULT_SERVICE_NAME 1922 #define PAN_GN_DEFAULT_SERVICE_NAME "Group Network Service" 1923 #endif 1924 1925 /* Default service name for PANU role */ 1926 #ifndef PAN_PANU_DEFAULT_SERVICE_NAME 1927 #define PAN_PANU_DEFAULT_SERVICE_NAME "PAN User Service" 1928 #endif 1929 1930 /* Default description for NAP role service */ 1931 #ifndef PAN_NAP_DEFAULT_DESCRIPTION 1932 #define PAN_NAP_DEFAULT_DESCRIPTION "NAP" 1933 #endif 1934 1935 /* Default description for GN role service */ 1936 #ifndef PAN_GN_DEFAULT_DESCRIPTION 1937 #define PAN_GN_DEFAULT_DESCRIPTION "GN" 1938 #endif 1939 1940 /* Default description for PANU role service */ 1941 #ifndef PAN_PANU_DEFAULT_DESCRIPTION 1942 #define PAN_PANU_DEFAULT_DESCRIPTION "PANU" 1943 #endif 1944 1945 /* Default Security level for PANU role. */ 1946 #ifndef PAN_PANU_SECURITY_LEVEL 1947 #define PAN_PANU_SECURITY_LEVEL 0 1948 #endif 1949 1950 /* Default Security level for GN role. */ 1951 #ifndef PAN_GN_SECURITY_LEVEL 1952 #define PAN_GN_SECURITY_LEVEL 0 1953 #endif 1954 1955 /* Default Security level for NAP role. */ 1956 #ifndef PAN_NAP_SECURITY_LEVEL 1957 #define PAN_NAP_SECURITY_LEVEL 0 1958 #endif 1959 1960 /****************************************************************************** 1961 ** 1962 ** GAP 1963 ** 1964 ******************************************************************************/ 1965 1966 #ifndef GAP_INCLUDED 1967 #define GAP_INCLUDED TRUE 1968 #endif 1969 1970 /* This is set to enable posting event for data write */ 1971 #ifndef GAP_CONN_POST_EVT_INCLUDED 1972 #define GAP_CONN_POST_EVT_INCLUDED FALSE 1973 #endif 1974 1975 /* The maximum number of simultaneous GAP L2CAP connections. */ 1976 #ifndef GAP_MAX_CONNECTIONS 1977 #define GAP_MAX_CONNECTIONS 10 // 30 1978 #endif 1979 1980 /* keep the raw data received from SDP server in database. */ 1981 #ifndef SDP_RAW_DATA_INCLUDED 1982 #define SDP_RAW_DATA_INCLUDED TRUE 1983 #endif 1984 1985 /* Inquiry duration in 1.28 second units. */ 1986 #ifndef SDP_DEBUG 1987 #define SDP_DEBUG TRUE 1988 #endif 1989 1990 /****************************************************************************** 1991 ** 1992 ** HID 1993 ** 1994 ******************************************************************************/ 1995 #ifndef BT_HID_INCLUDED 1996 #define BT_HID_INCLUDED FALSE 1997 #endif 1998 1999 /* HID Device Role Included */ 2000 #ifndef HID_DEV_INCLUDED 2001 #define HID_DEV_INCLUDED FALSE 2002 #endif 2003 2004 #ifndef HID_DEV_SUBCLASS 2005 #define HID_DEV_SUBCLASS COD_MINOR_POINTING 2006 #endif 2007 2008 #ifndef HID_CONTROL_BUF_SIZE 2009 #define HID_CONTROL_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2010 #endif 2011 2012 #ifndef HID_INTERRUPT_BUF_SIZE 2013 #define HID_INTERRUPT_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2014 #endif 2015 2016 #ifndef HID_DEV_MTU_SIZE 2017 #define HID_DEV_MTU_SIZE 64 2018 #endif 2019 2020 #ifndef HID_DEV_FLUSH_TO 2021 #define HID_DEV_FLUSH_TO 0xffff 2022 #endif 2023 2024 /************************************************************************* 2025 ** Definitions for Both HID-Host & Device 2026 */ 2027 #ifndef HID_MAX_SVC_NAME_LEN 2028 #define HID_MAX_SVC_NAME_LEN 32 2029 #endif 2030 2031 #ifndef HID_MAX_SVC_DESCR_LEN 2032 #define HID_MAX_SVC_DESCR_LEN 32 2033 #endif 2034 2035 #ifndef HID_MAX_PROV_NAME_LEN 2036 #define HID_MAX_PROV_NAME_LEN 32 2037 #endif 2038 2039 /************************************************************************* 2040 ** Definitions for HID-Host 2041 */ 2042 #ifndef HID_HOST_INCLUDED 2043 #define HID_HOST_INCLUDED FALSE 2044 #endif 2045 2046 #ifndef HID_HOST_MAX_DEVICES 2047 #define HID_HOST_MAX_DEVICES 7 2048 #endif 2049 2050 #ifndef HID_HOST_MTU 2051 #define HID_HOST_MTU 640 2052 #endif 2053 2054 #ifndef HID_HOST_FLUSH_TO 2055 #define HID_HOST_FLUSH_TO 0xffff 2056 #endif 2057 2058 #ifndef HID_HOST_MAX_CONN_RETRY 2059 #define HID_HOST_MAX_CONN_RETRY (3) 2060 #endif 2061 2062 #ifndef HID_HOST_REPAGE_WIN 2063 #define HID_HOST_REPAGE_WIN (2) 2064 #endif 2065 2066 /************************************************************************* 2067 * A2DP Definitions 2068 */ 2069 #ifndef A2D_INCLUDED 2070 #define A2D_INCLUDED FALSE 2071 #endif 2072 2073 /****************************************************************************** 2074 ** 2075 ** AVCTP 2076 ** 2077 ******************************************************************************/ 2078 2079 /* Number of simultaneous ACL links to different peer devices. */ 2080 #ifndef AVCT_NUM_LINKS 2081 #define AVCT_NUM_LINKS 2 2082 #endif 2083 2084 /* Number of simultaneous AVCTP connections. */ 2085 #ifndef AVCT_NUM_CONN 2086 #define AVCT_NUM_CONN 3 2087 #endif 2088 2089 /****************************************************************************** 2090 ** 2091 ** AVRCP 2092 ** 2093 ******************************************************************************/ 2094 #ifndef AVRC_INCLUDED 2095 #define AVRC_INCLUDED FALSE 2096 #endif 2097 2098 #ifndef AVRC_METADATA_INCLUDED 2099 #if AVRC_INCLUDED == TRUE 2100 #define AVRC_METADATA_INCLUDED TRUE 2101 #else 2102 #define AVRC_METADATA_INCLUDED FALSE 2103 #endif 2104 #endif 2105 2106 #ifndef AVRC_ADV_CTRL_INCLUDED 2107 #if AVRC_INCLUDED == TRUE 2108 #define AVRC_ADV_CTRL_INCLUDED TRUE 2109 #else 2110 #define AVRC_ADV_CTRL_INCLUDED FALSE 2111 #endif 2112 #endif 2113 2114 #ifndef AVRC_CTLR_INCLUDED 2115 #if AVRC_INCLUDED == TRUE 2116 #define AVRC_CTLR_INCLUDED TRUE 2117 #else 2118 #define AVRC_CTLR_INCLUDED FALSE 2119 #endif 2120 #endif 2121 2122 /****************************************************************************** 2123 ** 2124 ** MCAP 2125 ** 2126 ******************************************************************************/ 2127 #ifndef MCA_INCLUDED 2128 #define MCA_INCLUDED FALSE 2129 #endif 2130 2131 /* The MTU size for the L2CAP configuration on control channel. 48 is the minimal */ 2132 #ifndef MCA_CTRL_MTU 2133 #define MCA_CTRL_MTU 60 2134 #endif 2135 2136 /* The maximum number of registered MCAP instances. */ 2137 #ifndef MCA_NUM_REGS 2138 #define MCA_NUM_REGS 12 2139 #endif 2140 2141 /* The maximum number of control channels (to difference devices) per registered MCAP instances. */ 2142 #ifndef MCA_NUM_LINKS 2143 #define MCA_NUM_LINKS 3 2144 #endif 2145 2146 /* The maximum number of MDEP (including HDP echo) per registered MCAP instances. */ 2147 #ifndef MCA_NUM_DEPS 2148 #define MCA_NUM_DEPS 13 2149 #endif 2150 2151 /* The maximum number of MDL link per control channel. */ 2152 #ifndef MCA_NUM_MDLS 2153 #define MCA_NUM_MDLS 4 2154 #endif 2155 2156 /* Buffer size to reassemble the SDU. */ 2157 #ifndef MCA_USER_RX_BUF_SIZE 2158 #define MCA_USER_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2159 #endif 2160 2161 /* Buffer size to hold the SDU. */ 2162 #ifndef MCA_USER_TX_BUF_SIZE 2163 #define MCA_USER_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2164 #endif 2165 2166 /* 2167 * Buffer size used to hold MPS segments during SDU reassembly 2168 */ 2169 #ifndef MCA_FCR_RX_BUF_SIZE 2170 #define MCA_FCR_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2171 #endif 2172 2173 /* 2174 * Default buffer size used to hold MPS segments used in (re)transmissions. 2175 * The size of each buffer must be able to hold the maximum MPS segment size 2176 * passed in tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + 2177 * L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). 2178 */ 2179 #ifndef MCA_FCR_TX_BUF_SIZE 2180 #define MCA_FCR_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2181 #endif 2182 2183 /* MCAP control channel FCR Option: 2184 Size of the transmission window when using enhanced retransmission mode. 2185 1 is defined by HDP specification for control channel. 2186 */ 2187 #ifndef MCA_FCR_OPT_TX_WINDOW_SIZE 2188 #define MCA_FCR_OPT_TX_WINDOW_SIZE 1 2189 #endif 2190 2191 /* MCAP control channel FCR Option: 2192 Number of transmission attempts for a single I-Frame before taking 2193 Down the connection. Used In ERTM mode only. Value is Ignored in basic and 2194 Streaming modes. 2195 Range: 0, 1-0xFF 2196 0 - infinite retransmissions 2197 1 - single transmission 2198 */ 2199 #ifndef MCA_FCR_OPT_MAX_TX_B4_DISCNT 2200 #define MCA_FCR_OPT_MAX_TX_B4_DISCNT 20 2201 #endif 2202 2203 /* MCAP control channel FCR Option: Retransmission Timeout 2204 The AVRCP specification set a value in the range of 300 - 2000 ms 2205 Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode. 2206 Range: Minimum 2000 (2 secs) when supporting PBF. 2207 */ 2208 #ifndef MCA_FCR_OPT_RETX_TOUT 2209 #define MCA_FCR_OPT_RETX_TOUT 2000 2210 #endif 2211 2212 /* MCAP control channel FCR Option: Monitor Timeout 2213 The AVRCP specification set a value in the range of 300 - 2000 ms 2214 Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode. 2215 Range: Minimum 12000 (12 secs) when supporting PBF. 2216 */ 2217 #ifndef MCA_FCR_OPT_MONITOR_TOUT 2218 #define MCA_FCR_OPT_MONITOR_TOUT 12000 2219 #endif 2220 2221 /* MCAP control channel FCR Option: Maximum PDU payload size. 2222 The maximum number of payload octets that the local device can receive in a single PDU. 2223 */ 2224 #ifndef MCA_FCR_OPT_MPS_SIZE 2225 #define MCA_FCR_OPT_MPS_SIZE 1000 2226 #endif 2227 2228 /* Shared transport */ 2229 #ifndef NFC_SHARED_TRANSPORT_ENABLED 2230 #define NFC_SHARED_TRANSPORT_ENABLED FALSE 2231 #endif 2232 2233 /****************************************************************************** 2234 ** 2235 ** Sleep Mode (Low Power Mode) 2236 ** 2237 ******************************************************************************/ 2238 2239 #ifndef HCILP_INCLUDED 2240 #define HCILP_INCLUDED FALSE 2241 #endif 2242 2243 /****************************************************************************** 2244 ** 2245 ** APPL - Application Task 2246 ** 2247 ******************************************************************************/ 2248 2249 #define L2CAP_FEATURE_REQ_ID 73 2250 #define L2CAP_FEATURE_RSP_ID 173 2251 2252 /****************************************************************************** 2253 ** 2254 ** BTA 2255 ** 2256 ******************************************************************************/ 2257 /* BTA EIR canned UUID list (default is dynamic) */ 2258 #ifndef BTA_EIR_CANNED_UUID_LIST 2259 #define BTA_EIR_CANNED_UUID_LIST FALSE 2260 #endif 2261 2262 /* Number of supported customer UUID in EIR */ 2263 #ifndef BTA_EIR_SERVER_NUM_CUSTOM_UUID 2264 #define BTA_EIR_SERVER_NUM_CUSTOM_UUID 8 2265 #endif 2266 2267 /* CHLD override for bluedroid */ 2268 #ifndef BTA_AG_CHLD_VAL_ECC 2269 #define BTA_AG_CHLD_VAL_ECC "(0,1,1x,2,2x,3)" 2270 #endif 2271 2272 #ifndef BTA_AG_CHLD_VAL 2273 #define BTA_AG_CHLD_VAL "(0,1,2,3)" 2274 #endif 2275 2276 /* Set the CIND to match HFP 1.5 */ 2277 #ifndef BTA_AG_CIND_INFO 2278 #define BTA_AG_CIND_INFO "(\"call\",(0,1)),(\"callsetup\",(0-3)),(\"service\",(0-1)),(\"signal\",(0-5)),(\"roam\",(0,1)),(\"battchg\",(0-5)),(\"callheld\",(0-2))" 2279 #endif 2280 2281 #ifndef BTA_DM_AVOID_A2DP_ROLESWITCH_ON_INQUIRY 2282 #define BTA_DM_AVOID_A2DP_ROLESWITCH_ON_INQUIRY FALSE 2283 #endif 2284 2285 #ifndef BTA_GATTC_MAX_CACHE_CHAR 2286 #define BTA_GATTC_MAX_CACHE_CHAR UC_BT_GATTC_MAX_CACHE_CHAR 2287 #endif 2288 2289 /****************************************************************************** 2290 ** 2291 ** Tracing: Include trace header file here. 2292 ** 2293 ******************************************************************************/ 2294 2295 /* Enable/disable BTSnoop memory logging */ 2296 #ifndef BTSNOOP_MEM 2297 #define BTSNOOP_MEM FALSE 2298 #endif 2299 2300 #if UC_HEAP_ALLOCATION_FROM_SPIRAM_FIRST 2301 #define HEAP_ALLOCATION_FROM_SPIRAM_FIRST TRUE 2302 #else 2303 #define HEAP_ALLOCATION_FROM_SPIRAM_FIRST FALSE 2304 #endif 2305 2306 // TODO: add menuconfig and api for periodic adv sync transfer 2307 #if (BLE_50_FEATURE_SUPPORT) 2308 #define BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER TRUE 2309 #else 2310 #define BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER FALSE 2311 #endif 2312 2313 #include "common/bt_trace.h" 2314 2315 #endif /* BT_TARGET_H */ 2316
