1 /** 2 * \file blowfish.h 3 * 4 * \brief Blowfish block cipher 5 */ 6 /* 7 * Copyright The Mbed TLS Contributors 8 * SPDX-License-Identifier: Apache-2.0 9 * 10 * Licensed under the Apache License, Version 2.0 (the "License"); you may 11 * not use this file except in compliance with the License. 12 * You may obtain a copy of the License at 13 * 14 * http://www.apache.org/licenses/LICENSE-2.0 15 * 16 * Unless required by applicable law or agreed to in writing, software 17 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 18 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 19 * See the License for the specific language governing permissions and 20 * limitations under the License. 21 */ 22 #ifndef MBEDTLS_BLOWFISH_H 23 #define MBEDTLS_BLOWFISH_H 24 25 #if !defined(MBEDTLS_CONFIG_FILE) 26 #include "mbedtls/config.h" 27 #else 28 #include MBEDTLS_CONFIG_FILE 29 #endif 30 31 #include <stddef.h> 32 #include <stdint.h> 33 34 #include "mbedtls/platform_util.h" 35 36 #define MBEDTLS_BLOWFISH_ENCRYPT 1 37 #define MBEDTLS_BLOWFISH_DECRYPT 0 38 #define MBEDTLS_BLOWFISH_MAX_KEY_BITS 448 39 #define MBEDTLS_BLOWFISH_MIN_KEY_BITS 32 40 #define MBEDTLS_BLOWFISH_ROUNDS 16 /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */ 41 #define MBEDTLS_BLOWFISH_BLOCKSIZE 8 /* Blowfish uses 64 bit blocks */ 42 43 #if !defined(MBEDTLS_DEPRECATED_REMOVED) 44 #define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0016 ) 45 #endif /* !MBEDTLS_DEPRECATED_REMOVED */ 46 /** Bad input data. */ 47 #define MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA -0x0016 48 49 /** Invalid data input length. */ 50 #define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 51 52 /* MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED is deprecated and should not be used. 53 */ 54 /** Blowfish hardware accelerator failed. */ 55 #define MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED -0x0017 56 57 #ifdef __cplusplus 58 extern "C" { 59 #endif 60 61 #if !defined(MBEDTLS_BLOWFISH_ALT) 62 // Regular implementation 63 // 64 65 /** 66 * \brief Blowfish context structure 67 */ 68 typedef struct mbedtls_blowfish_context 69 { 70 uint32_t P[MBEDTLS_BLOWFISH_ROUNDS + 2]; /*!< Blowfish round keys */ 71 uint32_t S[4][256]; /*!< key dependent S-boxes */ 72 } 73 mbedtls_blowfish_context; 74 75 #else /* MBEDTLS_BLOWFISH_ALT */ 76 #include "blowfish_alt.h" 77 #endif /* MBEDTLS_BLOWFISH_ALT */ 78 79 /** 80 * \brief Initialize a Blowfish context. 81 * 82 * \param ctx The Blowfish context to be initialized. 83 * This must not be \c NULL. 84 */ 85 void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx ); 86 87 /** 88 * \brief Clear a Blowfish context. 89 * 90 * \param ctx The Blowfish context to be cleared. 91 * This may be \c NULL, in which case this function 92 * returns immediately. If it is not \c NULL, it must 93 * point to an initialized Blowfish context. 94 */ 95 void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx ); 96 97 /** 98 * \brief Perform a Blowfish key schedule operation. 99 * 100 * \param ctx The Blowfish context to perform the key schedule on. 101 * \param key The encryption key. This must be a readable buffer of 102 * length \p keybits Bits. 103 * \param keybits The length of \p key in Bits. This must be between 104 * \c 32 and \c 448 and a multiple of \c 8. 105 * 106 * \return \c 0 if successful. 107 * \return A negative error code on failure. 108 */ 109 int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key, 110 unsigned int keybits ); 111 112 /** 113 * \brief Perform a Blowfish-ECB block encryption/decryption operation. 114 * 115 * \param ctx The Blowfish context to use. This must be initialized 116 * and bound to a key. 117 * \param mode The mode of operation. Possible values are 118 * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or 119 * #MBEDTLS_BLOWFISH_DECRYPT for decryption. 120 * \param input The input block. This must be a readable buffer 121 * of size \c 8 Bytes. 122 * \param output The output block. This must be a writable buffer 123 * of size \c 8 Bytes. 124 * 125 * \return \c 0 if successful. 126 * \return A negative error code on failure. 127 */ 128 int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx, 129 int mode, 130 const unsigned char input[MBEDTLS_BLOWFISH_BLOCKSIZE], 131 unsigned char output[MBEDTLS_BLOWFISH_BLOCKSIZE] ); 132 133 #if defined(MBEDTLS_CIPHER_MODE_CBC) 134 /** 135 * \brief Perform a Blowfish-CBC buffer encryption/decryption operation. 136 * 137 * \note Upon exit, the content of the IV is updated so that you can 138 * call the function same function again on the following 139 * block(s) of data and get the same result as if it was 140 * encrypted in one call. This allows a "streaming" usage. 141 * If on the other hand you need to retain the contents of the 142 * IV, you should either save it manually or use the cipher 143 * module instead. 144 * 145 * \param ctx The Blowfish context to use. This must be initialized 146 * and bound to a key. 147 * \param mode The mode of operation. Possible values are 148 * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or 149 * #MBEDTLS_BLOWFISH_DECRYPT for decryption. 150 * \param length The length of the input data in Bytes. This must be 151 * multiple of \c 8. 152 * \param iv The initialization vector. This must be a read/write buffer 153 * of length \c 8 Bytes. It is updated by this function. 154 * \param input The input data. This must be a readable buffer of length 155 * \p length Bytes. 156 * \param output The output data. This must be a writable buffer of length 157 * \p length Bytes. 158 * 159 * \return \c 0 if successful. 160 * \return A negative error code on failure. 161 */ 162 int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx, 163 int mode, 164 size_t length, 165 unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE], 166 const unsigned char *input, 167 unsigned char *output ); 168 #endif /* MBEDTLS_CIPHER_MODE_CBC */ 169 170 #if defined(MBEDTLS_CIPHER_MODE_CFB) 171 /** 172 * \brief Perform a Blowfish CFB buffer encryption/decryption operation. 173 * 174 * \note Upon exit, the content of the IV is updated so that you can 175 * call the function same function again on the following 176 * block(s) of data and get the same result as if it was 177 * encrypted in one call. This allows a "streaming" usage. 178 * If on the other hand you need to retain the contents of the 179 * IV, you should either save it manually or use the cipher 180 * module instead. 181 * 182 * \param ctx The Blowfish context to use. This must be initialized 183 * and bound to a key. 184 * \param mode The mode of operation. Possible values are 185 * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or 186 * #MBEDTLS_BLOWFISH_DECRYPT for decryption. 187 * \param length The length of the input data in Bytes. 188 * \param iv_off The offset in the initialiation vector. 189 * The value pointed to must be smaller than \c 8 Bytes. 190 * It is updated by this function to support the aforementioned 191 * streaming usage. 192 * \param iv The initialization vector. This must be a read/write buffer 193 * of size \c 8 Bytes. It is updated after use. 194 * \param input The input data. This must be a readable buffer of length 195 * \p length Bytes. 196 * \param output The output data. This must be a writable buffer of length 197 * \p length Bytes. 198 * 199 * \return \c 0 if successful. 200 * \return A negative error code on failure. 201 */ 202 int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx, 203 int mode, 204 size_t length, 205 size_t *iv_off, 206 unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE], 207 const unsigned char *input, 208 unsigned char *output ); 209 #endif /*MBEDTLS_CIPHER_MODE_CFB */ 210 211 #if defined(MBEDTLS_CIPHER_MODE_CTR) 212 /** 213 * \brief Perform a Blowfish-CTR buffer encryption/decryption operation. 214 * 215 * \warning You must never reuse a nonce value with the same key. Doing so 216 * would void the encryption for the two messages encrypted with 217 * the same nonce and key. 218 * 219 * There are two common strategies for managing nonces with CTR: 220 * 221 * 1. You can handle everything as a single message processed over 222 * successive calls to this function. In that case, you want to 223 * set \p nonce_counter and \p nc_off to 0 for the first call, and 224 * then preserve the values of \p nonce_counter, \p nc_off and \p 225 * stream_block across calls to this function as they will be 226 * updated by this function. 227 * 228 * With this strategy, you must not encrypt more than 2**64 229 * blocks of data with the same key. 230 * 231 * 2. You can encrypt separate messages by dividing the \p 232 * nonce_counter buffer in two areas: the first one used for a 233 * per-message nonce, handled by yourself, and the second one 234 * updated by this function internally. 235 * 236 * For example, you might reserve the first 4 bytes for the 237 * per-message nonce, and the last 4 bytes for internal use. In that 238 * case, before calling this function on a new message you need to 239 * set the first 4 bytes of \p nonce_counter to your chosen nonce 240 * value, the last 4 to 0, and \p nc_off to 0 (which will cause \p 241 * stream_block to be ignored). That way, you can encrypt at most 242 * 2**32 messages of up to 2**32 blocks each with the same key. 243 * 244 * The per-message nonce (or information sufficient to reconstruct 245 * it) needs to be communicated with the ciphertext and must be unique. 246 * The recommended way to ensure uniqueness is to use a message 247 * counter. 248 * 249 * Note that for both stategies, sizes are measured in blocks and 250 * that a Blowfish block is 8 bytes. 251 * 252 * \warning Upon return, \p stream_block contains sensitive data. Its 253 * content must not be written to insecure storage and should be 254 * securely discarded as soon as it's no longer needed. 255 * 256 * \param ctx The Blowfish context to use. This must be initialized 257 * and bound to a key. 258 * \param length The length of the input data in Bytes. 259 * \param nc_off The offset in the current stream_block (for resuming 260 * within current cipher stream). The offset pointer 261 * should be \c 0 at the start of a stream and must be 262 * smaller than \c 8. It is updated by this function. 263 * \param nonce_counter The 64-bit nonce and counter. This must point to a 264 * read/write buffer of length \c 8 Bytes. 265 * \param stream_block The saved stream-block for resuming. This must point to 266 * a read/write buffer of length \c 8 Bytes. 267 * \param input The input data. This must be a readable buffer of 268 * length \p length Bytes. 269 * \param output The output data. This must be a writable buffer of 270 * length \p length Bytes. 271 * 272 * \return \c 0 if successful. 273 * \return A negative error code on failure. 274 */ 275 int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx, 276 size_t length, 277 size_t *nc_off, 278 unsigned char nonce_counter[MBEDTLS_BLOWFISH_BLOCKSIZE], 279 unsigned char stream_block[MBEDTLS_BLOWFISH_BLOCKSIZE], 280 const unsigned char *input, 281 unsigned char *output ); 282 #endif /* MBEDTLS_CIPHER_MODE_CTR */ 283 284 #ifdef __cplusplus 285 } 286 #endif 287 288 #endif /* blowfish.h */ 289
