1 /** 2 ****************************************************************************** 3 * @file stm32f3xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration file. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef __STM32F3xx_HAL_CONF_H 21 #define __STM32F3xx_HAL_CONF_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Exported types ------------------------------------------------------------*/ 28 /* Exported constants --------------------------------------------------------*/ 29 30 /* ########################## Module Selection ############################## */ 31 /** 32 * @brief This is the list of modules to be used in the HAL driver 33 */ 34 #define HAL_MODULE_ENABLED 35 #define HAL_ADC_MODULE_ENABLED 36 #define HAL_CAN_MODULE_ENABLED 37 /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ 38 #define HAL_CEC_MODULE_ENABLED 39 #define HAL_COMP_MODULE_ENABLED 40 #define HAL_CORTEX_MODULE_ENABLED 41 #define HAL_CRC_MODULE_ENABLED 42 #define HAL_DAC_MODULE_ENABLED 43 #define HAL_DMA_MODULE_ENABLED 44 #define HAL_FLASH_MODULE_ENABLED 45 #define HAL_SRAM_MODULE_ENABLED 46 #define HAL_NOR_MODULE_ENABLED 47 #define HAL_NAND_MODULE_ENABLED 48 #define HAL_PCCARD_MODULE_ENABLED 49 #define HAL_GPIO_MODULE_ENABLED 50 #define HAL_EXTI_MODULE_ENABLED 51 #define HAL_HRTIM_MODULE_ENABLED 52 #define HAL_I2C_MODULE_ENABLED 53 #define HAL_I2S_MODULE_ENABLED 54 #define HAL_IRDA_MODULE_ENABLED 55 #define HAL_IWDG_MODULE_ENABLED 56 #define HAL_OPAMP_MODULE_ENABLED 57 #define HAL_PCD_MODULE_ENABLED 58 #define HAL_PWR_MODULE_ENABLED 59 #define HAL_RCC_MODULE_ENABLED 60 #define HAL_RTC_MODULE_ENABLED 61 #define HAL_SDADC_MODULE_ENABLED 62 #define HAL_SMARTCARD_MODULE_ENABLED 63 #define HAL_SMBUS_MODULE_ENABLED 64 #define HAL_SPI_MODULE_ENABLED 65 #define HAL_TIM_MODULE_ENABLED 66 #define HAL_TSC_MODULE_ENABLED 67 #define HAL_UART_MODULE_ENABLED 68 #define HAL_USART_MODULE_ENABLED 69 #define HAL_WWDG_MODULE_ENABLED 70 71 /* ########################## HSE/HSI Values adaptation ##################### */ 72 /** 73 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 74 * This value is used by the RCC HAL module to compute the system frequency 75 * (when HSE is used as system clock source, directly or through the PLL). 76 */ 77 #if !defined (HSE_VALUE) 78 #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ 79 #endif /* HSE_VALUE */ 80 81 /** 82 * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 83 * Timeout value 84 */ 85 #if !defined (HSE_STARTUP_TIMEOUT) 86 #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ 87 #endif /* HSE_STARTUP_TIMEOUT */ 88 89 /** 90 * @brief Internal High Speed oscillator (HSI) value. 91 * This value is used by the RCC HAL module to compute the system frequency 92 * (when HSI is used as system clock source, directly or through the PLL). 93 */ 94 #if !defined (HSI_VALUE) 95 #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ 96 #endif /* HSI_VALUE */ 97 98 /** 99 * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 100 * Timeout value 101 */ 102 #if !defined (HSI_STARTUP_TIMEOUT) 103 #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ 104 #endif /* HSI_STARTUP_TIMEOUT */ 105 106 /** 107 * @brief Internal Low Speed oscillator (LSI) value. 108 */ 109 #if !defined (LSI_VALUE) 110 #define LSI_VALUE (40000U) 111 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 112 The real value may vary depending on the variations 113 in voltage and temperature. */ 114 /** 115 * @brief External Low Speed oscillator (LSE) value. 116 */ 117 #if !defined (LSE_VALUE) 118 #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ 119 #endif /* LSE_VALUE */ 120 121 /** 122 * @brief Time out for LSE start up value in ms. 123 */ 124 #if !defined (LSE_STARTUP_TIMEOUT) 125 #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ 126 #endif /* LSE_STARTUP_TIMEOUT */ 127 128 /** 129 * @brief External clock source for I2S peripheral 130 * This value is used by the I2S HAL module to compute the I2S clock source 131 * frequency, this source is inserted directly through I2S_CKIN pad. 132 * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) 133 * - External clock not generated on EVAL 373 134 */ 135 #if !defined (EXTERNAL_CLOCK_VALUE) 136 #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ 137 #endif /* EXTERNAL_CLOCK_VALUE */ 138 139 /* Tip: To avoid modifying this file each time you need to use different HSE, 140 === you can define the HSE value in your toolchain compiler preprocessor. */ 141 142 /* ########################### System Configuration ######################### */ 143 /** 144 * @brief This is the HAL system configuration section 145 */ 146 #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ 147 #define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ 148 #define USE_RTOS 0U 149 #define PREFETCH_ENABLE 1U 150 #define INSTRUCTION_CACHE_ENABLE 0U 151 #define DATA_CACHE_ENABLE 0U 152 #define USE_SPI_CRC 1U 153 154 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ 155 #define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ 156 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ 157 #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ 158 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ 159 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ 160 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ 161 #define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ 162 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ 163 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ 164 #define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ 165 #define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ 166 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ 167 #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ 168 #define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ 169 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ 170 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ 171 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ 172 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ 173 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ 174 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ 175 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ 176 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ 177 #define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ 178 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ 179 180 /* ########################## Assert Selection ############################## */ 181 /** 182 * @brief Uncomment the line below to expanse the "assert_param" macro in the 183 * HAL drivers code 184 */ 185 /*#define USE_FULL_ASSERT 1U*/ 186 187 /* Includes ------------------------------------------------------------------*/ 188 /** 189 * @brief Include module's header file 190 */ 191 192 #ifdef HAL_RCC_MODULE_ENABLED 193 #include "stm32f3xx_hal_rcc.h" 194 #endif /* HAL_RCC_MODULE_ENABLED */ 195 196 #ifdef HAL_GPIO_MODULE_ENABLED 197 #include "stm32f3xx_hal_gpio.h" 198 #endif /* HAL_GPIO_MODULE_ENABLED */ 199 200 #ifdef HAL_EXTI_MODULE_ENABLED 201 #include "stm32f3xx_hal_exti.h" 202 #endif /* HAL_EXTI_MODULE_ENABLED */ 203 204 #ifdef HAL_DMA_MODULE_ENABLED 205 #include "stm32f3xx_hal_dma.h" 206 #endif /* HAL_DMA_MODULE_ENABLED */ 207 208 #ifdef HAL_CORTEX_MODULE_ENABLED 209 #include "stm32f3xx_hal_cortex.h" 210 #endif /* HAL_CORTEX_MODULE_ENABLED */ 211 212 #ifdef HAL_ADC_MODULE_ENABLED 213 #include "stm32f3xx_hal_adc.h" 214 #endif /* HAL_ADC_MODULE_ENABLED */ 215 216 #ifdef HAL_CAN_MODULE_ENABLED 217 #include "stm32f3xx_hal_can.h" 218 #endif /* HAL_CAN_MODULE_ENABLED */ 219 220 #ifdef HAL_CAN_LEGACY_MODULE_ENABLED 221 #include "stm32f3xx_hal_can_legacy.h" 222 #endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ 223 224 #ifdef HAL_CEC_MODULE_ENABLED 225 #include "stm32f3xx_hal_cec.h" 226 #endif /* HAL_CEC_MODULE_ENABLED */ 227 228 #ifdef HAL_COMP_MODULE_ENABLED 229 #include "stm32f3xx_hal_comp.h" 230 #endif /* HAL_COMP_MODULE_ENABLED */ 231 232 #ifdef HAL_CRC_MODULE_ENABLED 233 #include "stm32f3xx_hal_crc.h" 234 #endif /* HAL_CRC_MODULE_ENABLED */ 235 236 #ifdef HAL_DAC_MODULE_ENABLED 237 #include "stm32f3xx_hal_dac.h" 238 #endif /* HAL_DAC_MODULE_ENABLED */ 239 240 #ifdef HAL_FLASH_MODULE_ENABLED 241 #include "stm32f3xx_hal_flash.h" 242 #endif /* HAL_FLASH_MODULE_ENABLED */ 243 244 #ifdef HAL_SRAM_MODULE_ENABLED 245 #include "stm32f3xx_hal_sram.h" 246 #endif /* HAL_SRAM_MODULE_ENABLED */ 247 248 #ifdef HAL_NOR_MODULE_ENABLED 249 #include "stm32f3xx_hal_nor.h" 250 #endif /* HAL_NOR_MODULE_ENABLED */ 251 252 #ifdef HAL_NAND_MODULE_ENABLED 253 #include "stm32f3xx_hal_nand.h" 254 #endif /* HAL_NAND_MODULE_ENABLED */ 255 256 #ifdef HAL_PCCARD_MODULE_ENABLED 257 #include "stm32f3xx_hal_pccard.h" 258 #endif /* HAL_PCCARD_MODULE_ENABLED */ 259 260 #ifdef HAL_HRTIM_MODULE_ENABLED 261 #include "stm32f3xx_hal_hrtim.h" 262 #endif /* HAL_HRTIM_MODULE_ENABLED */ 263 264 #ifdef HAL_I2C_MODULE_ENABLED 265 #include "stm32f3xx_hal_i2c.h" 266 #endif /* HAL_I2C_MODULE_ENABLED */ 267 268 #ifdef HAL_I2S_MODULE_ENABLED 269 #include "stm32f3xx_hal_i2s.h" 270 #endif /* HAL_I2S_MODULE_ENABLED */ 271 272 #ifdef HAL_IRDA_MODULE_ENABLED 273 #include "stm32f3xx_hal_irda.h" 274 #endif /* HAL_IRDA_MODULE_ENABLED */ 275 276 #ifdef HAL_IWDG_MODULE_ENABLED 277 #include "stm32f3xx_hal_iwdg.h" 278 #endif /* HAL_IWDG_MODULE_ENABLED */ 279 280 #ifdef HAL_OPAMP_MODULE_ENABLED 281 #include "stm32f3xx_hal_opamp.h" 282 #endif /* HAL_OPAMP_MODULE_ENABLED */ 283 284 #ifdef HAL_PCD_MODULE_ENABLED 285 #include "stm32f3xx_hal_pcd.h" 286 #endif /* HAL_PCD_MODULE_ENABLED */ 287 288 #ifdef HAL_PWR_MODULE_ENABLED 289 #include "stm32f3xx_hal_pwr.h" 290 #endif /* HAL_PWR_MODULE_ENABLED */ 291 292 #ifdef HAL_RTC_MODULE_ENABLED 293 #include "stm32f3xx_hal_rtc.h" 294 #endif /* HAL_RTC_MODULE_ENABLED */ 295 296 #ifdef HAL_SDADC_MODULE_ENABLED 297 #include "stm32f3xx_hal_sdadc.h" 298 #endif /* HAL_SDADC_MODULE_ENABLED */ 299 300 #ifdef HAL_SMARTCARD_MODULE_ENABLED 301 #include "stm32f3xx_hal_smartcard.h" 302 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 303 304 #ifdef HAL_SMBUS_MODULE_ENABLED 305 #include "stm32f3xx_hal_smbus.h" 306 #endif /* HAL_SMBUS_MODULE_ENABLED */ 307 308 #ifdef HAL_SPI_MODULE_ENABLED 309 #include "stm32f3xx_hal_spi.h" 310 #endif /* HAL_SPI_MODULE_ENABLED */ 311 312 #ifdef HAL_TIM_MODULE_ENABLED 313 #include "stm32f3xx_hal_tim.h" 314 #endif /* HAL_TIM_MODULE_ENABLED */ 315 316 #ifdef HAL_TSC_MODULE_ENABLED 317 #include "stm32f3xx_hal_tsc.h" 318 #endif /* HAL_TSC_MODULE_ENABLED */ 319 320 #ifdef HAL_UART_MODULE_ENABLED 321 #include "stm32f3xx_hal_uart.h" 322 #endif /* HAL_UART_MODULE_ENABLED */ 323 324 #ifdef HAL_USART_MODULE_ENABLED 325 #include "stm32f3xx_hal_usart.h" 326 #endif /* HAL_USART_MODULE_ENABLED */ 327 328 #ifdef HAL_WWDG_MODULE_ENABLED 329 #include "stm32f3xx_hal_wwdg.h" 330 #endif /* HAL_WWDG_MODULE_ENABLED */ 331 332 /* Exported macro ------------------------------------------------------------*/ 333 #ifdef USE_FULL_ASSERT 334 /** 335 * @brief The assert_param macro is used for function's parameters check. 336 * @param expr If expr is false, it calls assert_failed function 337 * which reports the name of the source file and the source 338 * line number of the call that failed. 339 * If expr is true, it returns no value. 340 * @retval None 341 */ 342 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 343 /* Exported functions ------------------------------------------------------- */ 344 void assert_failed(uint8_t* file, uint32_t line); 345 #else 346 #define assert_param(expr) ((void)0U) 347 #endif /* USE_FULL_ASSERT */ 348 349 #ifdef __cplusplus 350 } 351 #endif 352 353 #endif /* __STM32F3xx_HAL_CONF_H */ 354 355 356
