1 /****************************************************************************** 2 * 3 * Copyright (c) 2014 The Android Open Source Project 4 * Copyright (C) 1999-2012 Broadcom Corporation 5 * 6 * Licensed under the Apache License, Version 2.0 (the "License"); 7 * you may not use this file except in compliance with the License. 8 * You may obtain a copy of the License at: 9 * 10 * http://www.apache.org/licenses/LICENSE-2.0 11 * 12 * Unless required by applicable law or agreed to in writing, software 13 * distributed under the License is distributed on an "AS IS" BASIS, 14 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 15 * See the License for the specific language governing permissions and 16 * limitations under the License. 17 * 18 ******************************************************************************/ 19 20 #ifndef BT_TARGET_H 21 #define BT_TARGET_H 22 23 #include <bt_common.h> 24 25 #ifndef BUILDCFG 26 #define BUILDCFG 27 #endif 28 29 /* 30 #if !defined(HAS_BDROID_BUILDCFG) && !defined(HAS_NO_BDROID_BUILDCFG) 31 #error "An Android.mk file did not include bdroid_CFLAGS and possibly not bdorid_C_INCLUDES" 32 #endif 33 */ 34 35 #ifdef HAS_BDROID_BUILDCFG 36 #include "bdroid_buildcfg.h" 37 #endif 38 39 #include "bluedroid_user_config.h" 40 #include "stack/bt_types.h" /* This must be defined AFTER buildcfg.h */ 41 42 #include "stack/dyn_mem.h" /* defines static and/or dynamic memory for components */ 43 44 45 /* OS Configuration from User config (eg: sdkconfig) */ 46 #define BT_BTU_TASK_STACK_SIZE UC_BTU_TASK_STACK_SIZE 47 48 /****************************************************************************** 49 ** 50 ** Classic BT features 51 ** 52 ******************************************************************************/ 53 #if (UC_BT_CLASSIC_ENABLED == TRUE) 54 #define CLASSIC_BT_INCLUDED TRUE 55 #define BTC_SM_INCLUDED TRUE 56 #define BTC_PRF_QUEUE_INCLUDED TRUE 57 #define BTC_GAP_BT_INCLUDED TRUE 58 #define BTA_SDP_INCLUDED TRUE 59 #define BTA_DM_PM_INCLUDED TRUE 60 #define BTC_DM_PM_INCLUDED TRUE 61 #define SDP_INCLUDED TRUE 62 #define BTA_DM_QOS_INCLUDED TRUE 63 64 #if (UC_BT_A2DP_ENABLED == TRUE) 65 #define BTA_AR_INCLUDED TRUE 66 #define BTA_AV_INCLUDED TRUE 67 #define AVDT_INCLUDED TRUE 68 #define A2D_INCLUDED TRUE 69 #define AVCT_INCLUDED TRUE 70 #define AVRC_INCLUDED TRUE 71 #define BTC_AV_INCLUDED TRUE 72 #define BTA_AV_SINK_INCLUDED TRUE 73 #define BTC_AV_SINK_INCLUDED TRUE 74 #define SBC_DEC_INCLUDED TRUE 75 #define BTC_AV_SRC_INCLUDED TRUE 76 #define SBC_ENC_INCLUDED TRUE 77 #endif /* UC_BT_A2DP_ENABLED */ 78 79 #if (UC_BT_SPP_ENABLED == TRUE) 80 #define RFCOMM_INCLUDED TRUE 81 #define BTA_JV_INCLUDED TRUE 82 #define BTA_JV_RFCOMM_INCLUDED TRUE 83 #define BTC_SPP_INCLUDED TRUE 84 #endif /* UC_BT_SPP_ENABLED */ 85 86 #if (UC_BT_L2CAP_ENABLED == TRUE) 87 #define BTA_JV_INCLUDED TRUE 88 #define BTC_L2CAP_INCLUDED TRUE 89 #define BTC_SDP_INCLUDED TRUE 90 #define VND_BT_JV_BTA_L2CAP TRUE 91 #endif /* UC_BT_L2CAP_ENABLED */ 92 93 #if (UC_BT_HFP_AG_ENABLED == TRUE) || (UC_BT_HFP_CLIENT_ENABLED == TRUE) 94 #ifndef RFCOMM_INCLUDED 95 #define RFCOMM_INCLUDED TRUE 96 #endif 97 #ifndef BTM_SCO_INCLUDED 98 #define BTM_SCO_INCLUDED TRUE 99 #endif 100 #ifndef SBC_DEC_INCLUDED 101 #define SBC_DEC_INCLUDED TRUE 102 #endif 103 #ifndef SBC_ENC_INCLUDED 104 #define SBC_ENC_INCLUDED TRUE 105 #endif 106 #ifndef PLC_INCLUDED 107 #define PLC_INCLUDED TRUE 108 #endif 109 110 #if (UC_BT_HFP_AG_ENABLED == TRUE) 111 #ifndef BTM_MAX_SCO_LINKS_AG 112 #define BTM_MAX_SCO_LINKS_AG (1) 113 #endif 114 #define BTC_HF_INCLUDED TRUE 115 #define BTA_AG_INCLUDED TRUE 116 #else 117 #ifndef BTM_MAX_SCO_LINKS_AG 118 #define BTM_MAX_SCO_LINKS_AG (0) 119 #endif 120 #endif /* (UC_BT_HFP_AG_ENABLED == TRUE) */ 121 #if (UC_BT_HFP_CLIENT_ENABLED == TRUE) 122 #ifndef BTM_MAX_SCO_LINKS_CLIENT 123 #define BTM_MAX_SCO_LINKS_CLIENT (1) 124 #endif 125 #define BTC_HF_CLIENT_INCLUDED TRUE 126 #define BTA_HF_INCLUDED TRUE 127 #else 128 #ifndef BTM_MAX_SCO_LINKS_CLIENT 129 #define BTM_MAX_SCO_LINKS_CLIENT (0) 130 #endif 131 #endif /* (UC_BT_HFP_CLIENT_ENABLED == TRUE) */ 132 133 #ifndef BTM_MAX_SCO_LINKS 134 #define BTM_MAX_SCO_LINKS (BTM_MAX_SCO_LINKS_AG + BTM_MAX_SCO_LINKS_CLIENT) 135 #endif 136 #endif /* (UC_BT_HFP_AG_ENABLED == TRUE) || (UC_BT_HFP_CLIENT_ENABLED == TRUE) */ 137 138 #if UC_BT_SSP_ENABLED 139 #define BT_SSP_INCLUDED TRUE 140 #endif /* UC_BT_SSP_ENABLED */ 141 142 #if UC_BT_HID_ENABLED 143 #define BT_HID_INCLUDED TRUE 144 #endif /* UC_BT_HID_ENABLED */ 145 146 #if UC_BT_HID_HOST_ENABLED 147 #define HID_HOST_INCLUDED TRUE 148 #define BTA_HH_INCLUDED TRUE 149 #define BTC_HH_INCLUDED TRUE 150 #endif /* UC_BT_HID_HOST_ENABLED */ 151 152 #if UC_BT_HID_DEVICE_ENABLED 153 #define HID_DEV_INCLUDED TRUE 154 #define BTA_HD_INCLUDED TRUE 155 #define BTC_HD_INCLUDED TRUE 156 #endif /* UC_BT_HID_DEVICE_ENABLED */ 157 158 #endif /* UC_BT_CLASSIC_ENABLED */ 159 160 /* This is set to enable use of GAP L2CAP connections. */ 161 #if (VND_BT_JV_BTA_L2CAP == TRUE) 162 #define BTA_JV_L2CAP_INCLUDED TRUE 163 #define GAP_CONN_INCLUDED TRUE 164 #endif /* VND_BT_JV_BTA_L2CAP */ 165 166 #ifndef CLASSIC_BT_INCLUDED 167 #define CLASSIC_BT_INCLUDED FALSE 168 #endif /* CLASSIC_BT_INCLUDED */ 169 170 #ifndef CLASSIC_BT_GATT_INCLUDED 171 #define CLASSIC_BT_GATT_INCLUDED FALSE 172 #endif /* CLASSIC_BT_GATT_INCLUDED */ 173 /****************************************************************************** 174 ** 175 ** BLE features 176 ** 177 ******************************************************************************/ 178 #if (UC_BT_BLE_ENABLED ==TRUE) 179 #define BLE_INCLUDED TRUE 180 #else 181 #define BLE_INCLUDED FALSE 182 #endif /* UC_BT_BLE_ENABLED */ 183 184 #if (UC_BT_BLE_50_FEATURES_SUPPORTED == TRUE) 185 #define BLE_50_FEATURE_SUPPORT TRUE 186 #else 187 #define BLE_50_FEATURE_SUPPORT FALSE 188 #endif 189 190 #if (UC_BT_BLE_ENABLED ==TRUE) 191 #if (UC_BT_BLE_42_FEATURES_SUPPORTED == TRUE || BLE_50_FEATURE_SUPPORT == FALSE) 192 #define BLE_42_FEATURE_SUPPORT TRUE 193 #else 194 #define BLE_42_FEATURE_SUPPORT FALSE 195 #endif 196 #else 197 #define BLE_42_FEATURE_SUPPORT FALSE 198 #define BLE_50_FEATURE_SUPPORT FALSE 199 #endif /* UC_BT_BLE_ENABLED */ 200 201 #if (UC_BT_BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER == TRUE) 202 #define BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER TRUE 203 #else 204 #define BLE_FEAT_PERIODIC_ADV_SYNC_TRANSFER FALSE 205 #endif 206 207 #if (UC_BT_BLE_FEAT_PERIODIC_ADV_ENH == TRUE) 208 #define BLE_FEAT_PERIODIC_ADV_ENH TRUE 209 #else 210 #define BLE_FEAT_PERIODIC_ADV_ENH FALSE 211 #endif 212 213 #if (UC_BT_BLE_FEAT_CREATE_SYNC_ENH == TRUE) 214 #define BLE_FEAT_CREATE_SYNC_ENH TRUE 215 #else 216 #define BLE_FEAT_CREATE_SYNC_ENH FALSE 217 #endif 218 219 #if (UC_BT_BLE_HIGH_DUTY_ADV_INTERVAL == TRUE) 220 #define BLE_HIGH_DUTY_ADV_INTERVAL TRUE 221 #else 222 #define BLE_HIGH_DUTY_ADV_INTERVAL FALSE 223 #endif 224 225 #if (UC_BT_BLE_RPA_SUPPORTED == TRUE) 226 #define CONTROLLER_RPA_LIST_ENABLE TRUE 227 #else 228 #define CONTROLLER_RPA_LIST_ENABLE FALSE 229 #endif 230 231 #if (UC_BT_GATTS_ENABLE) 232 #define GATTS_INCLUDED TRUE 233 #else 234 #define GATTS_INCLUDED FALSE 235 #endif /* UC_BT_GATTS_ENABLE */ 236 237 #if (UC_BT_GATTC_ENABLE) 238 #define GATTC_INCLUDED TRUE 239 #else 240 #define GATTC_INCLUDED FALSE 241 #endif /* UC_BT_GATTC_ENABLE */ 242 243 #if (UC_BT_GATTC_ENABLE && UC_BT_GATTC_CACHE_NVS_FLASH_ENABLED) 244 #define GATTC_CACHE_NVS TRUE 245 #else 246 #define GATTC_CACHE_NVS FALSE 247 #endif /* UC_BT_GATTC_ENABLE && UC_BT_GATTC_CACHE_NVS_FLASH_ENABLED */ 248 249 #if (UC_BT_GATTC_ENABLE && UC_BT_GATTC_CONNECT_RETRY_COUNT) 250 #define GATTC_CONNECT_RETRY_COUNT UC_BT_GATTC_CONNECT_RETRY_COUNT 251 #else 252 #define GATTC_CONNECT_RETRY_COUNT 0 253 #endif /* UC_BT_GATTC_ENABLE && UC_BT_GATTC_CONNECT_RETRY_COUNT */ 254 255 #if (GATTC_CONNECT_RETRY_COUNT > 0) 256 #define GATTC_CONNECT_RETRY_EN TRUE 257 #else 258 #define GATTC_CONNECT_RETRY_EN FALSE 259 #endif 260 261 #ifdef UC_BT_GATTC_NOTIF_REG_MAX 262 #define BTA_GATTC_NOTIF_REG_MAX UC_BT_GATTC_NOTIF_REG_MAX 263 #else 264 #define BTA_GATTC_NOTIF_REG_MAX 5 265 #endif 266 267 #if (UC_BT_SMP_ENABLE) 268 #define SMP_INCLUDED TRUE 269 #if (BLE_INCLUDED == TRUE) 270 #define BLE_PRIVACY_SPT TRUE 271 #else 272 #define BLE_PRIVACY_SPT FALSE 273 #endif /*BLE_INCLUDED*/ 274 #else 275 #define SMP_INCLUDED FALSE 276 #define BLE_PRIVACY_SPT FALSE 277 #endif /* UC_BT_SMP_ENABLE */ 278 279 #if(UC_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE) 280 #define SMP_SLAVE_CON_PARAMS_UPD_ENABLE TRUE 281 #else 282 #define SMP_SLAVE_CON_PARAMS_UPD_ENABLE FALSE 283 #endif /* UC_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE */ 284 285 #if (UC_BT_BLE_SMP_ID_RESET_ENABLE) 286 #define BLE_SMP_ID_RESET_ENABLE TRUE 287 #else 288 #define BLE_SMP_ID_RESET_ENABLE FALSE 289 #endif 290 291 #if (UC_BT_BLE_SMP_BOND_NVS_FLASH) 292 #define BLE_SMP_BOND_NVS_FLASH TRUE 293 #else 294 #define BLE_SMP_BOND_NVS_FLASH FALSE 295 #endif 296 297 #ifdef UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP 298 #define BLE_ADV_REPORT_FLOW_CONTROL (UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP && BLE_INCLUDED) 299 #endif /* UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP */ 300 301 #ifdef UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM 302 #define BLE_ADV_REPORT_FLOW_CONTROL_NUM UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM 303 #endif /* UC_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM */ 304 305 #ifdef UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD 306 #define BLE_ADV_REPORT_DISCARD_THRSHOLD UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD 307 #endif /* UC_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD */ 308 309 #ifdef UC_BT_ACL_CONNECTIONS 310 #define MAX_ACL_CONNECTIONS UC_BT_ACL_CONNECTIONS 311 #define GATT_MAX_PHY_CHANNEL UC_BT_ACL_CONNECTIONS 312 #endif /* UC_BT_ACL_CONNECTIONS */ 313 314 #ifdef UC_BT_MULTI_CONNECTION_ENBALE 315 #define BT_MULTI_CONNECTION_ENBALE UC_BT_MULTI_CONNECTION_ENBALE 316 #endif 317 318 #if(BT_MULTI_CONNECTION_ENBALE && (CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3)) 319 #define BLE_CE_LEN_MIN 5 320 #else 321 #define BLE_CE_LEN_MIN 0 322 #endif 323 324 #ifdef UC_BT_BLE_ESTAB_LINK_CONN_TOUT 325 #define BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT UC_BT_BLE_ESTAB_LINK_CONN_TOUT 326 #endif 327 328 //------------------Added from bdroid_buildcfg.h--------------------- 329 #ifndef L2CAP_EXTFEA_SUPPORTED_MASK 330 #define L2CAP_EXTFEA_SUPPORTED_MASK (L2CAP_EXTFEA_ENH_RETRANS | L2CAP_EXTFEA_STREAM_MODE | L2CAP_EXTFEA_NO_CRC | L2CAP_EXTFEA_FIXED_CHNLS) 331 #endif 332 333 #ifndef BTUI_OPS_FORMATS 334 #define BTUI_OPS_FORMATS (BTA_OP_VCARD21_MASK | BTA_OP_ANY_MASK) 335 #endif 336 337 #ifndef BTA_RFC_MTU_SIZE 338 #define BTA_RFC_MTU_SIZE (L2CAP_MTU_SIZE-L2CAP_MIN_OFFSET-RFCOMM_DATA_OVERHEAD) 339 #endif 340 341 #ifndef SBC_NO_PCM_CPY_OPTION 342 #define SBC_NO_PCM_CPY_OPTION FALSE 343 #endif 344 345 #ifndef BT_APP_DEMO 346 #define BT_APP_DEMO TRUE 347 #endif 348 349 #ifndef BTIF_INCLUDED 350 #define BTIF_INCLUDED FALSE 351 #endif 352 353 /****************************************************************************** 354 ** 355 ** BTC-layer components 356 ** 357 ******************************************************************************/ 358 #ifndef BTC_GAP_BT_INCLUDED 359 #define BTC_GAP_BT_INCLUDED FALSE 360 #endif 361 362 #ifndef BTC_PRF_QUEUE_INCLUDED 363 #define BTC_PRF_QUEUE_INCLUDED FALSE 364 #endif 365 366 #ifndef BTC_SM_INCLUDED 367 #define BTC_SM_INCLUDED FALSE 368 #endif 369 370 #ifndef BTC_AV_INCLUDED 371 #define BTC_AV_INCLUDED FALSE 372 #endif 373 374 #ifndef BTC_AV_SINK_INCLUDED 375 #define BTC_AV_SINK_INCLUDED FALSE 376 #endif 377 378 #ifndef BTC_AV_SRC_INCLUDED 379 #define BTC_AV_SRC_INCLUDED FALSE 380 #endif 381 382 #ifndef BTC_SPP_INCLUDED 383 #define BTC_SPP_INCLUDED FALSE 384 #endif 385 386 #ifndef BTC_HH_INCLUDED 387 #define BTC_HH_INCLUDED FALSE 388 #endif 389 390 #ifndef BTC_HD_INCLUDED 391 #define BTC_HD_INCLUDED FALSE 392 #endif 393 394 #ifndef SBC_DEC_INCLUDED 395 #define SBC_DEC_INCLUDED FALSE 396 #endif 397 398 #ifndef SBC_ENC_INCLUDED 399 #define SBC_ENC_INCLUDED FALSE 400 #endif 401 402 /****************************************************************************** 403 ** 404 ** BTA-layer components 405 ** 406 ******************************************************************************/ 407 #ifndef BTA_INCLUDED 408 #define BTA_INCLUDED TRUE 409 #endif 410 411 #ifndef BTA_DM_PM_INCLUDED 412 #define BTA_DM_PM_INCLUDED FALSE 413 #endif 414 415 #ifndef BTA_DM_QOS_INCLUDED 416 #define BTA_DM_QOS_INCLUDED FALSE 417 #endif 418 419 #ifndef BTA_PAN_INCLUDED 420 #define BTA_PAN_INCLUDED FALSE 421 #endif 422 423 #ifndef BTA_HD_INCLUDED 424 #define BTA_HD_INCLUDED FALSE 425 #endif 426 427 #ifndef BTA_HH_INCLUDED 428 #define BTA_HH_INCLUDED FALSE 429 #endif 430 431 #ifndef BTA_HH_ROLE 432 #define BTA_HH_ROLE BTA_MASTER_ROLE_PREF 433 #endif 434 435 #ifndef BTA_HH_LE_INCLUDED 436 #define BTA_HH_LE_INCLUDED FALSE 437 #endif 438 439 #ifndef BTA_AR_INCLUDED 440 #define BTA_AR_INCLUDED FALSE 441 #endif 442 443 #ifndef BTA_AV_INCLUDED 444 #define BTA_AV_INCLUDED FALSE 445 #endif 446 447 #ifndef BTA_AV_SINK_INCLUDED 448 #define BTA_AV_SINK_INCLUDED FALSE 449 #endif 450 451 #ifndef BTA_JV_INCLUDED 452 #define BTA_JV_INCLUDED FALSE 453 #endif 454 455 #ifndef BTA_SDP_INCLUDED 456 #define BTA_SDP_INCLUDED FALSE 457 #endif 458 459 /* This is set to enable use of GAP L2CAP connections. */ 460 #ifndef VND_BT_JV_BTA_L2CAP 461 #define VND_BT_JV_BTA_L2CAP FALSE 462 #endif 463 464 #ifndef BTA_JV_L2CAP_INCLUDED 465 #define BTA_JV_L2CAP_INCLUDED FALSE 466 #endif 467 468 #ifndef GAP_CONN_INCLUDED 469 #define GAP_CONN_INCLUDED FALSE 470 #endif 471 472 /****************************************************************************** 473 ** 474 ** Stack-layer components 475 ** 476 ******************************************************************************/ 477 #ifndef AVCT_INCLUDED 478 #define AVCT_INCLUDED FALSE 479 #endif 480 481 #ifndef AVDT_INCLUDED 482 #define AVDT_INCLUDED FALSE 483 #endif 484 485 /****************************************************************************** 486 ** 487 ** Parameter Configurations for components 488 ** 489 ******************************************************************************/ 490 #ifndef BTA_DISABLE_DELAY 491 #define BTA_DISABLE_DELAY 200 /* in milliseconds */ 492 #endif 493 494 #ifndef BTA_SYS_TIMER_PERIOD 495 #define BTA_SYS_TIMER_PERIOD 100 496 #endif 497 498 #ifndef SBC_FOR_EMBEDDED_LINUX 499 #define SBC_FOR_EMBEDDED_LINUX TRUE 500 #endif 501 502 #ifndef AVDT_VERSION 503 #define AVDT_VERSION 0x0102 504 #endif 505 506 #ifndef BTA_AG_AT_MAX_LEN 507 #define BTA_AG_AT_MAX_LEN 512 508 #endif 509 510 #ifndef BTA_AVRCP_FF_RW_SUPPORT 511 #define BTA_AVRCP_FF_RW_SUPPORT FALSE 512 #endif 513 514 #ifndef BTA_AG_SCO_PKT_TYPES 515 #define BTA_AG_SCO_PKT_TYPES (BTM_SCO_LINK_ONLY_MASK | BTM_SCO_PKT_TYPES_MASK_EV3 | BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | BTM_SCO_PKT_TYPES_MASK_NO_3_EV5) 516 #endif 517 518 #ifndef BTA_AV_RET_TOUT 519 #define BTA_AV_RET_TOUT 15 520 #endif 521 522 #ifndef PORCHE_PAIRING_CONFLICT 523 #define PORCHE_PAIRING_CONFLICT TRUE 524 #endif 525 526 #ifndef BTA_AV_CO_CP_SCMS_T 527 #define BTA_AV_CO_CP_SCMS_T FALSE 528 #endif 529 530 #if UC_BT_BLE_HOST_QUEUE_CONGESTION_CHECK 531 #define SCAN_QUEUE_CONGEST_CHECK TRUE 532 #else 533 #define SCAN_QUEUE_CONGEST_CHECK FALSE 534 #endif 535 536 #ifdef UC_CONFIG_BT_GATTS_PPCP_CHAR_GAP 537 #define BTM_PERIPHERAL_ENABLED UC_CONFIG_BT_GATTS_PPCP_CHAR_GAP 538 #endif 539 540 #ifdef UC_BT_GATTS_SEND_SERVICE_CHANGE_MODE 541 #define GATTS_SEND_SERVICE_CHANGE_MODE UC_BT_GATTS_SEND_SERVICE_CHANGE_MODE 542 #endif 543 544 #if (UC_BT_GATTS_ROBUST_CACHING_ENABLED == TRUE) 545 #define GATTS_ROBUST_CACHING_ENABLED TRUE 546 #else 547 #define GATTS_ROBUST_CACHING_ENABLED FALSE 548 #endif 549 550 #if (UC_BT_GATTS_DEVICE_NAME_WRITABLE == TRUE) 551 #define GATTS_DEVICE_NAME_WRITABLE TRUE 552 #else 553 #define GATTS_DEVICE_NAME_WRITABLE FALSE 554 #endif 555 556 #if (UC_BT_GATTS_APPEARANCE_WRITABLE == TRUE) 557 #define GATTS_APPEARANCE_WRITABLE TRUE 558 #else 559 #define GATTS_APPEARANCE_WRITABLE FALSE 560 #endif 561 562 #ifdef UC_BT_BLE_ACT_SCAN_REP_ADV_SCAN 563 #define BTM_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY UC_BT_BLE_ACT_SCAN_REP_ADV_SCAN 564 #endif 565 566 #ifdef UC_BT_BLE_RPA_TIMEOUT 567 #define BTM_BLE_PRIVATE_ADDR_INT UC_BT_BLE_RPA_TIMEOUT 568 #endif 569 570 #if (UC_BT_CLASSIC_BQB_ENABLED == TRUE) 571 #define BT_CLASSIC_BQB_INCLUDED TRUE 572 #else 573 #define BT_CLASSIC_BQB_INCLUDED FALSE 574 #endif 575 576 /* This feature is used to enable interleaved scan*/ 577 #ifndef BTA_HOST_INTERLEAVE_SEARCH 578 #define BTA_HOST_INTERLEAVE_SEARCH FALSE 579 #endif 580 581 #ifndef BT_USE_TRACES 582 #define BT_USE_TRACES FALSE 583 #endif 584 585 #ifndef BT_TRACE_BTIF 586 #define BT_TRACE_BTIF TRUE 587 #endif 588 589 #ifndef BT_TRACE_VERBOSE 590 #define BT_TRACE_VERBOSE FALSE 591 #endif 592 593 #ifndef BTA_DM_SDP_DB_SIZE 594 #define BTA_DM_SDP_DB_SIZE 8000 595 #endif 596 597 #ifndef HL_INCLUDED 598 #define HL_INCLUDED TRUE 599 #endif 600 601 #ifndef AG_VOICE_SETTINGS 602 #define AG_VOICE_SETTINGS HCI_DEFAULT_VOICE_SETTINGS 603 #endif 604 605 #ifndef BTIF_DM_OOB_TEST 606 #define BTIF_DM_OOB_TEST FALSE 607 #endif 608 609 // How long to wait before activating sniff mode after entering the 610 // idle state for FTS, OPS connections 611 #ifndef BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS 612 #define BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS 7000 613 #endif 614 #ifndef BTA_FTC_OPS_IDLE_TO_SNIFF_DELAY_MS 615 #define BTA_FTC_OPS_IDLE_TO_SNIFF_DELAY_MS 5000 616 #endif 617 618 //------------------End added from bdroid_buildcfg.h--------------------- 619 620 621 /****************************************************************************** 622 ** 623 ** Buffer Size 624 ** 625 ******************************************************************************/ 626 627 #ifndef BT_DEFAULT_BUFFER_SIZE 628 #define BT_DEFAULT_BUFFER_SIZE (4096 + 16) 629 #endif 630 631 #ifndef BT_SMALL_BUFFER_SIZE 632 #define BT_SMALL_BUFFER_SIZE 660 633 #endif 634 635 /* Receives HCI events from the lower-layer. */ 636 #ifndef HCI_CMD_BUF_SIZE 637 #define HCI_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 638 #endif 639 640 /* Sends SDP data packets. */ 641 #ifndef SDP_DATA_BUF_SIZE 642 #define SDP_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 643 #endif 644 645 /* Sends RFCOMM command packets. */ 646 #ifndef RFCOMM_CMD_BUF_SIZE 647 #define RFCOMM_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 648 #endif 649 650 /* Sends RFCOMM data packets. */ 651 #ifndef RFCOMM_DATA_BUF_SIZE 652 #define RFCOMM_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 653 #endif 654 655 /* Sends L2CAP packets to the peer and HCI messages to the controller. */ 656 #ifndef L2CAP_CMD_BUF_SIZE 657 #define L2CAP_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 658 #endif 659 660 #ifndef L2CAP_USER_TX_BUF_SIZE 661 #define L2CAP_USER_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 662 #endif 663 664 #ifndef L2CAP_USER_RX_BUF_SIZE 665 #define L2CAP_USER_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 666 #endif 667 668 /* Sends L2CAP segmented packets in ERTM mode */ 669 #ifndef L2CAP_FCR_TX_BUF_SIZE 670 #define L2CAP_FCR_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 671 #endif 672 673 /* Receives L2CAP segmented packets in ERTM mode */ 674 #ifndef L2CAP_FCR_RX_BUF_SIZE 675 #define L2CAP_FCR_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 676 #endif 677 678 #ifndef L2CAP_FCR_ERTM_BUF_SIZE 679 #define L2CAP_FCR_ERTM_BUF_SIZE (10240 + 24) 680 #endif 681 682 /* Number of ACL buffers to assign to LE 683 if the HCI buffer pool is shared with BR/EDR */ 684 #ifndef L2C_DEF_NUM_BLE_BUF_SHARED 685 #define L2C_DEF_NUM_BLE_BUF_SHARED 1 686 #endif 687 688 /* Used by BTM when it sends HCI commands to the controller. */ 689 #ifndef BTM_CMD_BUF_SIZE 690 #define BTM_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 691 #endif 692 693 #ifndef OBX_LRG_DATA_BUF_SIZE 694 #define OBX_LRG_DATA_BUF_SIZE (8080 + 26) 695 #endif 696 697 /* Used to send data to L2CAP. */ 698 #ifndef GAP_DATA_BUF_SIZE 699 #define GAP_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 700 #endif 701 702 /* BNEP data and protocol messages. */ 703 #ifndef BNEP_BUF_SIZE 704 #define BNEP_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 705 #endif 706 707 /* AVDTP buffer size for protocol messages */ 708 #ifndef AVDT_CMD_BUF_SIZE 709 #define AVDT_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 710 #endif 711 712 /* AVDTP buffer size for media packets in case of fragmentation */ 713 #ifndef AVDT_DATA_BUF_SIZE 714 #define AVDT_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 715 #endif 716 717 #ifndef PAN_BUF_SIZE 718 #define PAN_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 719 #endif 720 721 /* Maximum number of buffers to allocate for PAN */ 722 #ifndef PAN_BUF_MAX 723 #define PAN_BUF_MAX 100 724 #endif 725 726 /* AVCTP buffer size for protocol messages */ 727 #ifndef AVCT_CMD_BUF_SIZE 728 #define AVCT_CMD_BUF_SIZE 288 729 #endif 730 731 /* AVRCP buffer size for protocol messages */ 732 #ifndef AVRC_CMD_BUF_SIZE 733 #define AVRC_CMD_BUF_SIZE 288 734 #endif 735 736 /* AVRCP Metadata buffer size for protocol messages */ 737 #ifndef AVRC_META_CMD_BUF_SIZE 738 #define AVRC_META_CMD_BUF_SIZE BT_SMALL_BUFFER_SIZE 739 #endif 740 741 #ifndef BTA_HL_LRG_DATA_BUF_SIZE 742 #define BTA_HL_LRG_DATA_BUF_SIZE (10240 + 24) 743 #endif 744 745 /* GATT Server Database buffer size */ 746 #ifndef GATT_DB_BUF_SIZE 747 #define GATT_DB_BUF_SIZE 128 748 #endif 749 750 /* GATT Data sending buffer size */ 751 #ifndef GATT_DATA_BUF_SIZE 752 #define GATT_DATA_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 753 #endif 754 755 /****************************************************************************** 756 ** 757 ** HCI Services (H4) 758 ** 759 ******************************************************************************/ 760 761 /* Use 2 second for low-resolution systems, override to 1 for high-resolution systems */ 762 #ifndef BT_1SEC_TIMEOUT 763 #define BT_1SEC_TIMEOUT (2) 764 #endif 765 766 /* Quick Timer */ 767 /* if L2CAP_FCR_INCLUDED is TRUE then it should have 100 millisecond resolution */ 768 /* if none of them is included then QUICK_TIMER_TICKS_PER_SEC is set to 0 to exclude quick timer */ 769 #ifndef QUICK_TIMER_TICKS_PER_SEC 770 #define QUICK_TIMER_TICKS_PER_SEC 10 /* 100ms timer */ 771 #endif 772 773 /****************************************************************************** 774 ** 775 ** BTM 776 ** 777 ******************************************************************************/ 778 779 /* Cancel Inquiry on incoming SSP */ 780 #ifndef BTM_NO_SSP_ON_INQUIRY 781 #define BTM_NO_SSP_ON_INQUIRY FALSE 782 #endif 783 784 /* Includes SCO if TRUE */ 785 #ifndef BTM_SCO_INCLUDED 786 #define BTM_SCO_INCLUDED FALSE /* TRUE includes SCO code */ 787 #endif 788 789 /* Includes SCO if TRUE */ 790 #ifndef BTM_SCO_HCI_INCLUDED 791 #if UC_BT_HFP_AUDIO_DATA_PATH_HCI 792 #define BTM_SCO_HCI_INCLUDED TRUE /* TRUE includes SCO over HCI code */ 793 #else 794 #define BTM_SCO_HCI_INCLUDED FALSE 795 #endif /* UC_HFP_AUDIO_DATA_PATH_HCI */ 796 #endif 797 798 /* Includes WBS if TRUE */ 799 #ifndef BTM_WBS_INCLUDED 800 #define BTM_WBS_INCLUDED UC_BT_HFP_WBS_ENABLE /* TRUE includes WBS code */ 801 #endif 802 803 /* This is used to work around a controller bug that doesn't like Disconnect 804 ** issued while there is a role switch in progress 805 */ 806 #ifndef BTM_DISC_DURING_RS 807 #define BTM_DISC_DURING_RS TRUE 808 #endif 809 810 /************************** 811 ** Initial SCO TX credit 812 *************************/ 813 /* max TX SCO data packet size */ 814 #ifndef BTM_SCO_DATA_SIZE_MAX 815 #define BTM_SCO_DATA_SIZE_MAX 120 //240 816 #endif 817 818 /* max TX eSCO data packet size */ 819 #ifndef BTM_MSBC_FRAME_SIZE 820 #define BTM_MSBC_FRAME_SIZE 60 821 #endif 822 823 /* TX eSCO data packet size */ 824 #ifndef BTM_MSBC_FRAME_DATA_SIZE 825 #define BTM_MSBC_FRAME_DATA_SIZE 57 826 #endif 827 828 /* The size in bytes of the BTM inquiry database. 5 As Default */ 829 #ifndef BTM_INQ_DB_SIZE 830 #define BTM_INQ_DB_SIZE 5 831 #endif 832 833 /* The default scan mode */ 834 #ifndef BTM_DEFAULT_SCAN_TYPE 835 #define BTM_DEFAULT_SCAN_TYPE BTM_SCAN_TYPE_INTERLACED 836 #endif 837 838 /* Should connections to unknown devices be allowed when not discoverable? */ 839 #ifndef BTM_ALLOW_CONN_IF_NONDISCOVER 840 #define BTM_ALLOW_CONN_IF_NONDISCOVER TRUE 841 #endif 842 843 /* Sets the Page_Scan_Window: the length of time that the device is performing a page scan. */ 844 #ifndef BTM_DEFAULT_CONN_WINDOW 845 #define BTM_DEFAULT_CONN_WINDOW 0x0012 846 #endif 847 848 /* Sets the Page_Scan_Activity: the interval between the start of two consecutive page scans. */ 849 #ifndef BTM_DEFAULT_CONN_INTERVAL 850 #define BTM_DEFAULT_CONN_INTERVAL 0x0800 851 #endif 852 853 /* When automatic inquiry scan is enabled, this sets the inquiry scan window. */ 854 #ifndef BTM_DEFAULT_DISC_WINDOW 855 #define BTM_DEFAULT_DISC_WINDOW 0x0012 856 #endif 857 858 /* When automatic inquiry scan is enabled, this sets the inquiry scan interval. */ 859 #ifndef BTM_DEFAULT_DISC_INTERVAL 860 #define BTM_DEFAULT_DISC_INTERVAL 0x0800 861 #endif 862 863 /* 864 * {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS} 865 * 866 * SERVICE_CLASS:0x5A (Bit17 -Networking,Bit19 - Capturing,Bit20 -Object Transfer,Bit22 -Telephony) 867 * MAJOR_CLASS:0x02 - PHONE 868 * MINOR_CLASS:0x0C - SMART_PHONE 869 * 870 */ 871 #define BTA_DM_COD_SMARTPHONE {0x5A, 0x02, 0x0C} 872 873 /* 874 * {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS} 875 * 876 * SERVICE_CLASS:0x2C (Bit21 - Audio, Bit19 - Capturing) 877 * MAJOR_CLASS:0x04 - Audio/Video 878 * MINOR_CLASS:0x05 - LoudSpeaker 879 */ 880 #define BTA_DM_COD_LOUDSPEAKER {0x2C, 0x04, 0x14} 881 882 /* 883 * {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS} 884 * 885 * SERVICE_CLASS:0x00 None 886 * MAJOR_CLASS:0x1f - Uncategorized: device code not specified 887 * MINOR_CLASS:0x00 - None 888 */ 889 #define BTA_DM_COD_UNCLASSIFIED {0x00, 0x1f, 0x00} 890 891 /* Default class of device */ 892 #ifndef BTA_DM_COD 893 #define BTA_DM_COD BTA_DM_COD_UNCLASSIFIED 894 #endif 895 896 /* The number of SCO links. */ 897 #ifndef BTM_MAX_SCO_LINKS 898 #define BTM_MAX_SCO_LINKS 0 //3 899 #endif 900 901 /* The preferred type of SCO links (2-eSCO, 0-SCO). */ 902 #ifndef BTM_DEFAULT_SCO_MODE 903 #define BTM_DEFAULT_SCO_MODE 2 904 #endif 905 906 /* The number of security records for peer devices. 15 AS Default*/ 907 #ifndef BTM_SEC_MAX_DEVICE_RECORDS 908 #define BTM_SEC_MAX_DEVICE_RECORDS UC_BT_SMP_MAX_BONDS 909 #endif 910 911 /* The number of security records for services. 32 AS Default*/ 912 #ifndef BTM_SEC_MAX_SERVICE_RECORDS 913 #define BTM_SEC_MAX_SERVICE_RECORDS 8 // 32 914 #endif 915 916 /* If True, force a retrieval of remote device name for each bond in case it's changed */ 917 #ifndef BTM_SEC_FORCE_RNR_FOR_DBOND 918 #define BTM_SEC_FORCE_RNR_FOR_DBOND FALSE 919 #endif 920 921 /* Maximum device name length used in btm database. Up to 248*/ 922 #ifndef BTM_MAX_REM_BD_NAME_LEN 923 #define BTM_MAX_REM_BD_NAME_LEN 64 924 #endif 925 926 /* Maximum local device name length stored btm database. 927 '0' disables storage of the local name in BTM */ 928 #if UC_MAX_LOC_BD_NAME_LEN 929 #define BTM_MAX_LOC_BD_NAME_LEN UC_MAX_LOC_BD_NAME_LEN 930 #define BTC_MAX_LOC_BD_NAME_LEN BTM_MAX_LOC_BD_NAME_LEN 931 #else 932 #define BTM_MAX_LOC_BD_NAME_LEN 64 933 #define BTC_MAX_LOC_BD_NAME_LEN BTM_MAX_LOC_BD_NAME_LEN 934 #endif 935 936 /* Fixed Default String. When this is defined as null string, the device's 937 * product model name is used as the default local name. 938 */ 939 #ifndef BTM_DEF_LOCAL_NAME 940 #define BTM_DEF_LOCAL_NAME "" 941 #endif 942 943 /* Maximum service name stored with security authorization (0 if not needed) */ 944 #ifndef BTM_SEC_SERVICE_NAME_LEN 945 #define BTM_SEC_SERVICE_NAME_LEN BT_MAX_SERVICE_NAME_LEN 946 #endif 947 948 /* Maximum length of the service name. */ 949 #ifndef BT_MAX_SERVICE_NAME_LEN 950 #define BT_MAX_SERVICE_NAME_LEN 21 951 #endif 952 953 /* ACL buffer size in HCI Host Buffer Size command. */ 954 #ifndef BTM_ACL_BUF_SIZE 955 #define BTM_ACL_BUF_SIZE 0 956 #endif 957 958 /* The maximum number of clients that can register with the power manager. */ 959 #ifndef BTM_MAX_PM_RECORDS 960 #define BTM_MAX_PM_RECORDS 2 961 #endif 962 963 /* This is set to show debug trace messages for the power manager. */ 964 #ifndef BTM_PM_DEBUG 965 #define BTM_PM_DEBUG FALSE 966 #endif 967 968 /* This is set to TRUE if link is to be unparked due to BTM_CreateSCO API. */ 969 #ifndef BTM_SCO_WAKE_PARKED_LINK 970 #define BTM_SCO_WAKE_PARKED_LINK FALSE 971 #endif 972 973 /* If the user does not respond to security process requests within this many seconds, 974 * a negative response would be sent automatically. 975 * 30 is LMP response timeout value */ 976 #ifndef BTM_SEC_TIMEOUT_VALUE 977 #define BTM_SEC_TIMEOUT_VALUE 35 978 #endif 979 980 /* Maximum number of callbacks that can be registered using BTM_RegisterForVSEvents */ 981 #ifndef BTM_MAX_VSE_CALLBACKS 982 #define BTM_MAX_VSE_CALLBACKS 3 983 #endif 984 985 /****************************************** 986 ** Lisbon Features 987 *******************************************/ 988 /* This is set to TRUE if the FEC is required for EIR packet. */ 989 #ifndef BTM_EIR_DEFAULT_FEC_REQUIRED 990 #define BTM_EIR_DEFAULT_FEC_REQUIRED TRUE 991 #endif 992 993 /* The IO capability of the local device (for Simple Pairing) */ 994 #ifndef BTM_LOCAL_IO_CAPS 995 #define BTM_LOCAL_IO_CAPS BTM_IO_CAP_NONE 996 #endif 997 998 #ifndef BTM_LOCAL_IO_CAPS_BLE 999 #if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE) 1000 #define BTM_LOCAL_IO_CAPS_BLE BTM_IO_CAP_KBDISP 1001 #else 1002 #define BTM_LOCAL_IO_CAPS_BLE 4 1003 #endif ///BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 1004 #endif 1005 1006 /* The default MITM Protection Requirement (for Simple Pairing) 1007 * Possible values are BTM_AUTH_SP_YES or BTM_AUTH_SP_NO */ 1008 #ifndef BTM_DEFAULT_AUTH_REQ 1009 #define BTM_DEFAULT_AUTH_REQ BTM_AUTH_SP_NO 1010 #endif 1011 1012 /* The default MITM Protection Requirement for dedicated bonding using Simple Pairing 1013 * Possible values are BTM_AUTH_AP_YES or BTM_AUTH_AP_NO */ 1014 #ifndef BTM_DEFAULT_DD_AUTH_REQ 1015 #define BTM_DEFAULT_DD_AUTH_REQ BTM_AUTH_AP_YES 1016 #endif 1017 1018 /* Include Out-of-Band implementation for Simple Pairing */ 1019 #ifndef BTM_OOB_INCLUDED 1020 #define BTM_OOB_INCLUDED TRUE 1021 #endif 1022 1023 /* TRUE to include Sniff Subrating */ 1024 #if (BTA_DM_PM_INCLUDED == TRUE) 1025 #ifndef BTM_SSR_INCLUDED 1026 #define BTM_SSR_INCLUDED FALSE 1027 #endif 1028 #endif /* BTA_DM_PM_INCLUDED */ 1029 1030 /************************* 1031 ** End of Lisbon Features 1032 **************************/ 1033 1034 /* 4.1/4.2 secure connections feature */ 1035 #ifndef SC_MODE_INCLUDED 1036 // Disable AES-CCM (BT 4.1) for BT Classic to workaround controller AES issue. E0 encryption (BT 4.0) will be used. 1037 #define SC_MODE_INCLUDED FALSE 1038 #endif 1039 1040 /* Used for conformance testing ONLY */ 1041 #ifndef BTM_BLE_CONFORMANCE_TESTING 1042 #define BTM_BLE_CONFORMANCE_TESTING FALSE 1043 #endif 1044 1045 /****************************************************************************** 1046 ** 1047 ** CONTROLLER TO HOST FLOW CONTROL 1048 ** 1049 ******************************************************************************/ 1050 1051 #define C2H_FLOW_CONTROL_INCLUDED TRUE 1052 1053 /****************************************************************************** 1054 ** 1055 ** L2CAP 1056 ** 1057 ******************************************************************************/ 1058 1059 #ifndef L2CAP_CLIENT_INCLUDED 1060 #define L2CAP_CLIENT_INCLUDED FALSE 1061 #endif 1062 1063 /* The maximum number of simultaneous applications that can register with LE L2CAP. */ 1064 #ifndef BLE_MAX_L2CAP_CLIENTS 1065 #define BLE_MAX_L2CAP_CLIENTS 15 1066 #endif 1067 1068 /* Support status of L2CAP connection-oriented dynamic channels over LE transport with dynamic CID */ 1069 #ifndef BLE_L2CAP_COC_INCLUDED 1070 #define BLE_L2CAP_COC_INCLUDED FALSE // LE COC not use by default 1071 #endif 1072 1073 /* Support status of L2CAP connection-oriented dynamic channels over LE or BR/EDR transport with dynamic CID */ 1074 #ifndef L2CAP_COC_INCLUDED 1075 #if (CLASSIC_BT_INCLUDED == TRUE || BLE_L2CAP_COC_INCLUDED == TRUE) 1076 #define L2CAP_COC_INCLUDED TRUE 1077 #else 1078 #define L2CAP_COC_INCLUDED FALSE 1079 #endif 1080 #endif 1081 1082 /* The maximum number of simultaneous links that L2CAP can support. Up to 7*/ 1083 #ifndef MAX_ACL_CONNECTIONS 1084 #define MAX_L2CAP_LINKS 5 1085 #else 1086 #define MAX_L2CAP_LINKS MAX_ACL_CONNECTIONS 1087 #endif 1088 1089 /* The maximum number of simultaneous channels that L2CAP can support. Up to 16*/ 1090 #ifndef MAX_L2CAP_CHANNELS 1091 #if (CLASSIC_BT_INCLUDED == TRUE) 1092 #define MAX_L2CAP_CHANNELS 16 1093 #else 1094 #if (SMP_INCLUDED == FALSE) 1095 #define MAX_L2CAP_CHANNELS MAX_ACL_CONNECTIONS //This is used in the BLE client when start connected with the peer device 1096 #else 1097 #define MAX_L2CAP_CHANNELS (MAX_ACL_CONNECTIONS * 2) //This is used in the BLE client when start connected with the peer device and in SMP 1098 #endif ///SMP_INCLUDED == FALSE 1099 #endif ///CLASSIC_BT_INCLUDED == TRUE 1100 #endif ///MAX_L2CAP_CHANNELS 1101 1102 /* The maximum number of simultaneous applications that can register with L2CAP. */ 1103 #ifndef MAX_L2CAP_CLIENTS 1104 #if (CLASSIC_BT_INCLUDED == TRUE) 1105 #define MAX_L2CAP_CLIENTS 8 1106 #else 1107 #define MAX_L2CAP_CLIENTS 1 //Not support to allocate a channel control block in BLE only mode 1108 #endif ///CLASSIC_BT_INCLUDED == TRUE 1109 #endif 1110 1111 /* The number of seconds of link inactivity before a link is disconnected. */ 1112 #ifndef L2CAP_LINK_INACTIVITY_TOUT 1113 #define L2CAP_LINK_INACTIVITY_TOUT 4 1114 #endif 1115 1116 /* The number of seconds of link inactivity after bonding before a link is disconnected. */ 1117 #ifndef L2CAP_BONDING_TIMEOUT 1118 #define L2CAP_BONDING_TIMEOUT 3 1119 #endif 1120 1121 /* The time from the HCI connection complete to disconnect if no channel is established. */ 1122 #ifndef L2CAP_LINK_STARTUP_TOUT 1123 #define L2CAP_LINK_STARTUP_TOUT 60 1124 #endif 1125 1126 /* The L2CAP MTU; must be in accord with the HCI ACL pool size. */ 1127 #ifndef L2CAP_MTU_SIZE 1128 #define L2CAP_MTU_SIZE 1691 1129 #endif 1130 1131 /* The L2CAP MPS over Bluetooth; must be in accord with the FCR tx pool size and ACL down buffer size. */ 1132 #ifndef L2CAP_MPS_OVER_BR_EDR 1133 #define L2CAP_MPS_OVER_BR_EDR 1010 1134 #endif 1135 1136 /* If host flow control enabled, this is the number of buffers the controller can have unacknowledged. */ 1137 #ifndef L2CAP_HOST_FC_ACL_BUFS 1138 #define L2CAP_HOST_FC_ACL_BUFS 20 1139 #endif 1140 1141 /* This is set to enable L2CAP to take the ACL link out of park mode when ACL data is to be sent. */ 1142 #ifndef L2CAP_WAKE_PARKED_LINK 1143 #define L2CAP_WAKE_PARKED_LINK TRUE 1144 #endif 1145 1146 /* Whether link wants to be the master or the slave. */ 1147 #ifndef L2CAP_DESIRED_LINK_ROLE 1148 #define L2CAP_DESIRED_LINK_ROLE HCI_ROLE_SLAVE 1149 #endif 1150 1151 /* Include Non-Flushable Packet Boundary Flag feature of Lisbon */ 1152 #ifndef L2CAP_NON_FLUSHABLE_PB_INCLUDED 1153 #define L2CAP_NON_FLUSHABLE_PB_INCLUDED TRUE 1154 #endif 1155 1156 /* Minimum number of ACL credit for high priority link */ 1157 #ifndef L2CAP_HIGH_PRI_MIN_XMIT_QUOTA 1158 #define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA 5 1159 #endif 1160 1161 /* used for monitoring HCI ACL credit management */ 1162 #ifndef L2CAP_HCI_FLOW_CONTROL_DEBUG 1163 #define L2CAP_HCI_FLOW_CONTROL_DEBUG TRUE 1164 #endif 1165 1166 /* Used for calculating transmit buffers off of */ 1167 #ifndef L2CAP_NUM_XMIT_BUFFS 1168 #define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX 1169 #endif 1170 1171 /* Unicast Connectionless Data */ 1172 #ifndef L2CAP_UCD_INCLUDED 1173 #define L2CAP_UCD_INCLUDED FALSE 1174 #endif 1175 1176 /* Unicast Connectionless Data MTU */ 1177 #ifndef L2CAP_UCD_MTU 1178 #define L2CAP_UCD_MTU L2CAP_MTU_SIZE 1179 #endif 1180 1181 /* Unicast Connectionless Data Idle Timeout */ 1182 #ifndef L2CAP_UCD_IDLE_TIMEOUT 1183 #define L2CAP_UCD_IDLE_TIMEOUT 2 1184 #endif 1185 1186 /* Unicast Connectionless Data Idle Timeout */ 1187 #ifndef L2CAP_UCD_CH_PRIORITY 1188 #define L2CAP_UCD_CH_PRIORITY L2CAP_CHNL_PRIORITY_MEDIUM 1189 #endif 1190 1191 /* Used for features using fixed channels; set to zero if no fixed channels supported (BLE, etc.) */ 1192 /* Excluding L2CAP signaling channel and UCD */ 1193 #ifndef L2CAP_NUM_FIXED_CHNLS 1194 #if (CLASSIC_BT_INCLUDED == TRUE) 1195 #define L2CAP_NUM_FIXED_CHNLS 32 1196 #else 1197 #define L2CAP_NUM_FIXED_CHNLS 3 //There are just three fix channel in the BLE only mode(gatt,signal,smp) 1198 #endif ///CLASSIC_BT_INCLUDED == TRUE 1199 #endif 1200 1201 /* First fixed channel supported */ 1202 #ifndef L2CAP_FIRST_FIXED_CHNL 1203 #define L2CAP_FIRST_FIXED_CHNL 4 1204 #endif 1205 1206 #ifndef L2CAP_LAST_FIXED_CHNL 1207 #define L2CAP_LAST_FIXED_CHNL (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1) 1208 #endif 1209 1210 /* Round Robin service channels in link */ 1211 #ifndef L2CAP_ROUND_ROBIN_CHANNEL_SERVICE 1212 #define L2CAP_ROUND_ROBIN_CHANNEL_SERVICE TRUE 1213 #endif 1214 1215 /* Used for calculating transmit buffers off of */ 1216 #ifndef L2CAP_NUM_XMIT_BUFFS 1217 #define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX 1218 #endif 1219 1220 /* used for monitoring eL2CAP data flow */ 1221 #ifndef L2CAP_ERTM_STATS 1222 #define L2CAP_ERTM_STATS FALSE 1223 #endif 1224 1225 /* Used for conformance testing ONLY: When TRUE lets scriptwrapper overwrite info response */ 1226 #ifndef L2CAP_CONFORMANCE_TESTING 1227 #define L2CAP_CONFORMANCE_TESTING FALSE 1228 #endif 1229 1230 /* 1231 * Max bytes per connection to buffer locally before dropping the 1232 * connection if local client does not receive it - default is 1MB 1233 */ 1234 #ifndef L2CAP_MAX_RX_BUFFER 1235 #define L2CAP_MAX_RX_BUFFER 0x100000 1236 #endif 1237 1238 1239 #ifndef TIMER_PARAM_TYPE 1240 #define TIMER_PARAM_TYPE UINT32 1241 #endif 1242 1243 /****************************************************************************** 1244 ** 1245 ** BLE 1246 ** 1247 ******************************************************************************/ 1248 1249 #ifndef BLE_INCLUDED 1250 #define BLE_INCLUDED FALSE 1251 #endif 1252 1253 #ifndef BLE_ANDROID_CONTROLLER_SCAN_FILTER 1254 #define BLE_ANDROID_CONTROLLER_SCAN_FILTER TRUE 1255 #endif 1256 1257 #ifndef LOCAL_BLE_CONTROLLER_ID 1258 #define LOCAL_BLE_CONTROLLER_ID (1) 1259 #endif 1260 1261 /* 1262 * Toggles support for general LE privacy features such as remote address 1263 * resolution, local address rotation etc. 1264 */ 1265 #ifndef BLE_PRIVACY_SPT 1266 #define BLE_PRIVACY_SPT FALSE 1267 #endif 1268 1269 /* 1270 * Enables or disables support for local privacy (ex. address rotation) 1271 */ 1272 #ifndef BLE_LOCAL_PRIVACY_ENABLED 1273 #define BLE_LOCAL_PRIVACY_ENABLED TRUE 1274 #endif 1275 1276 /* 1277 * Toggles support for vendor specific extensions such as RPA offloading, 1278 * feature discovery, multi-adv etc. 1279 */ 1280 #ifndef BLE_VND_INCLUDED 1281 #define BLE_VND_INCLUDED FALSE 1282 #endif 1283 1284 #ifndef BTM_BLE_ADV_TX_POWER 1285 #ifdef CONFIG_IDF_TARGET_ESP32 1286 #define BTM_BLE_ADV_TX_POWER {-12, -9, -6, -3, 0, 3, 6, 9} 1287 #else 1288 #define BTM_BLE_ADV_TX_POWER {-24, -21, -18, -15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15, 18, 20} 1289 #endif 1290 #endif 1291 1292 #ifndef BTM_TX_POWER 1293 #ifdef CONFIG_IDF_TARGET_ESP32 1294 #define BTM_TX_POWER {-12, -9, -6, -3, 0, 3, 6, 9} 1295 #else 1296 #define BTM_TX_POWER {-24, -21, -18, -15, -12, -9, -6, -3, 0, 3, 6, 9, 12, 15, 18, 20} 1297 #endif 1298 #endif 1299 1300 #ifndef BTM_TX_POWER_LEVEL_MAX 1301 #ifdef CONFIG_IDF_TARGET_ESP32 1302 #define BTM_TX_POWER_LEVEL_MAX 7 1303 #else 1304 #define BTM_TX_POWER_LEVEL_MAX 15 1305 #endif 1306 #endif 1307 1308 1309 #ifndef BLE_BATCH_SCAN_INCLUDED 1310 #define BLE_BATCH_SCAN_INCLUDED TRUE 1311 #endif 1312 1313 /****************************************************************************** 1314 ** 1315 ** ATT/GATT Protocol/Profile Settings 1316 ** 1317 ******************************************************************************/ 1318 #ifndef GATT_INCLUDED 1319 #if BLE_INCLUDED == TRUE 1320 #define GATT_INCLUDED TRUE 1321 #else 1322 #define GATT_INCLUDED FALSE 1323 #endif 1324 #endif 1325 1326 #ifndef BTA_GATT_INCLUDED 1327 #if BLE_INCLUDED == TRUE 1328 #define BTA_GATT_INCLUDED TRUE 1329 #else 1330 #define BTA_GATT_INCLUDED FALSE 1331 #endif 1332 #endif 1333 1334 #if BTA_GATT_INCLUDED == TRUE && BLE_INCLUDED == FALSE 1335 #error "can't have GATT without BLE" 1336 #endif 1337 1338 #ifndef BLE_LLT_INCLUDED 1339 #define BLE_LLT_INCLUDED TRUE 1340 #endif 1341 1342 /* Added this marco to fixed the android 7.0 will lead to update connection parameters 1343 collision when the slave sent the HCI_BLE_UPD_LL_CONN_PARAMS comment to the controller 1344 request the master to update connection parameters directly. */ 1345 #ifndef BLE_SLAVE_UPD_CONN_PARAMS 1346 #define BLE_SLAVE_UPD_CONN_PARAMS FALSE 1347 #endif 1348 1349 #ifndef ATT_INCLUDED 1350 #define ATT_INCLUDED TRUE 1351 #endif 1352 1353 #ifndef ATT_DEBUG 1354 #define ATT_DEBUG FALSE 1355 #endif 1356 1357 #ifndef BLE_PERIPHERAL_MODE_SUPPORT 1358 #define BLE_PERIPHERAL_MODE_SUPPORT TRUE 1359 #endif 1360 1361 #ifndef BLE_DELAY_REQUEST_ENC 1362 /* This flag is to work around IPHONE problem, We need to wait for iPhone ready 1363 before send encryption request to iPhone */ 1364 #define BLE_DELAY_REQUEST_ENC FALSE 1365 #endif 1366 1367 #ifndef GAP_TRANSPORT_SUPPORTED 1368 #define GAP_TRANSPORT_SUPPORTED GATT_TRANSPORT_LE_BR_EDR 1369 #endif 1370 1371 #ifndef GATTP_TRANSPORT_SUPPORTED 1372 #define GATTP_TRANSPORT_SUPPORTED GATT_TRANSPORT_LE_BR_EDR 1373 #endif 1374 1375 #ifndef GATT_MAX_SR_PROFILES 1376 #define GATT_MAX_SR_PROFILES UC_CONFIG_BT_GATT_MAX_SR_PROFILES 1377 #endif 1378 1379 #ifndef GATT_MAX_APPS 1380 #define GATT_MAX_APPS 8 /* MAX is 32 note: 2 apps used internally GATT and GAP */ 1381 #endif 1382 1383 #ifndef GATT_MAX_PHY_CHANNEL 1384 #define GATT_MAX_PHY_CHANNEL 7 1385 #endif 1386 1387 /* Used for conformance testing ONLY */ 1388 #ifndef GATT_CONFORMANCE_TESTING 1389 #define GATT_CONFORMANCE_TESTING FALSE 1390 #endif 1391 1392 /* number of background connection device allowance, ideally to be the same as WL size 1393 */ 1394 #ifndef GATT_MAX_BG_CONN_DEV 1395 #define GATT_MAX_BG_CONN_DEV 8 /*MAX is 32*/ 1396 #endif 1397 1398 /****************************************************************************** 1399 ** 1400 ** GATT 1401 ** 1402 ******************************************************************************/ 1403 #ifndef GATTC_INCLUDED 1404 #if BLE_INCLUDED == TRUE 1405 #define GATTC_INCLUDED FALSE 1406 #else 1407 #define GATTC_INCLUDED FALSE 1408 #endif 1409 #endif 1410 1411 #ifndef GATTS_INCLUDED 1412 #if BLE_INCLUDED == TRUE 1413 #define GATTS_INCLUDED TRUE 1414 #else 1415 #define GATTS_INCLUDED FALSE 1416 #endif 1417 #endif 1418 1419 /****************************************************************************** 1420 ** 1421 ** SMP 1422 ** 1423 ******************************************************************************/ 1424 #ifndef SMP_INCLUDED 1425 #if BLE_INCLUDED == TRUE 1426 #define SMP_INCLUDED FALSE 1427 #else 1428 #define SMP_INCLUDED FALSE 1429 #endif 1430 #endif 1431 1432 #ifndef SMP_DEBUG 1433 #define SMP_DEBUG FALSE 1434 #endif 1435 1436 #ifndef SMP_DEFAULT_AUTH_REQ 1437 #define SMP_DEFAULT_AUTH_REQ SMP_AUTH_NB_ENC_ONLY 1438 #endif 1439 1440 #ifndef SMP_MAX_ENC_KEY_SIZE 1441 #define SMP_MAX_ENC_KEY_SIZE 16 1442 #endif 1443 1444 #ifndef SMP_MIN_ENC_KEY_SIZE 1445 #define SMP_MIN_ENC_KEY_SIZE 7 1446 #endif 1447 1448 /* minimum link timeout after SMP pairing is done, leave room for key exchange 1449 and racing condition for the following service connection. 1450 Prefer greater than 0 second, and no less than default inactivity link idle 1451 timer(L2CAP_LINK_INACTIVITY_TOUT) in l2cap) */ 1452 #ifndef SMP_LINK_TOUT_MIN 1453 #if (L2CAP_LINK_INACTIVITY_TOUT > 0) 1454 #define SMP_LINK_TOUT_MIN L2CAP_LINK_INACTIVITY_TOUT 1455 #else 1456 #define SMP_LINK_TOUT_MIN 2 1457 #endif 1458 #endif 1459 1460 /****************************************************************************** 1461 ** 1462 ** BT_SSP 1463 ** 1464 ******************************************************************************/ 1465 #ifndef BT_SSP_INCLUDED 1466 #define BT_SSP_INCLUDED FALSE 1467 #endif 1468 1469 #if BT_SSP_INCLUDED == TRUE && CLASSIC_BT_INCLUDED == FALSE 1470 #error "Can't have SSP without CLASSIC BT" 1471 #endif 1472 1473 /****************************************************************************** 1474 ** 1475 ** SDP 1476 ** 1477 ******************************************************************************/ 1478 1479 #ifndef SDP_INCLUDED 1480 #define SDP_INCLUDED FALSE 1481 #endif 1482 1483 #if (SDP_INCLUDED == TRUE) && (BTA_JV_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) 1484 #define BT_SDP_BQB_INCLUDED TRUE 1485 #else 1486 #define BT_SDP_BQB_INCLUDED FALSE 1487 #endif 1488 1489 /* This is set to enable SDP server functionality. */ 1490 #ifndef SDP_SERVER_ENABLED 1491 #if SDP_INCLUDED == TRUE 1492 #define SDP_SERVER_ENABLED TRUE 1493 #else 1494 #define SDP_SERVER_ENABLED FALSE 1495 #endif 1496 #endif 1497 1498 /* This is set to enable SDP client functionality. */ 1499 #ifndef SDP_CLIENT_ENABLED 1500 #if SDP_INCLUDED == TRUE 1501 #define SDP_CLIENT_ENABLED TRUE 1502 #else 1503 #define SDP_CLIENT_ENABLED FALSE 1504 #endif 1505 #endif 1506 1507 /* The maximum number of SDP records the server can support. */ 1508 #ifndef SDP_MAX_RECORDS 1509 #define SDP_MAX_RECORDS 6 /*max is 30*/ 1510 #endif 1511 1512 /* The maximum number of attributes in each record. */ 1513 #ifndef SDP_MAX_REC_ATTR 1514 #if (defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE)) || (defined(BTC_SDP_INCLUDED) && (BTC_SDP_INCLUDED==TRUE)) 1515 #define SDP_MAX_REC_ATTR 25 1516 #else 1517 #define SDP_MAX_REC_ATTR 8 1518 #endif /* defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE) */ 1519 #endif 1520 1521 #ifndef SDP_MAX_PAD_LEN 1522 #define SDP_MAX_PAD_LEN 300 1523 #endif 1524 1525 /* The maximum length, in bytes, of an attribute. */ 1526 #ifndef SDP_MAX_ATTR_LEN 1527 #define SDP_MAX_ATTR_LEN 400 1528 #endif 1529 1530 /* The maximum number of attribute filters supported by SDP databases. */ 1531 #ifndef SDP_MAX_ATTR_FILTERS 1532 #define SDP_MAX_ATTR_FILTERS 15 1533 #endif 1534 1535 /* The maximum number of UUID filters supported by SDP databases. */ 1536 #ifndef SDP_MAX_UUID_FILTERS 1537 #define SDP_MAX_UUID_FILTERS 3 1538 #endif 1539 1540 /* The maximum number of record handles retrieved in a search. */ 1541 #ifndef SDP_MAX_DISC_SERVER_RECS 1542 #define SDP_MAX_DISC_SERVER_RECS 21 1543 #endif 1544 1545 /* The size of a scratchpad buffer, in bytes, for storing the response to an attribute request. */ 1546 #ifndef SDP_MAX_LIST_BYTE_COUNT 1547 #define SDP_MAX_LIST_BYTE_COUNT 4096 1548 #endif 1549 1550 /* The maximum number of parameters in an SDP protocol element. */ 1551 #ifndef SDP_MAX_PROTOCOL_PARAMS 1552 #define SDP_MAX_PROTOCOL_PARAMS 2 1553 #endif 1554 1555 /* The maximum number of simultaneous client and server connections. */ 1556 #ifndef SDP_MAX_CONNECTIONS 1557 #define SDP_MAX_CONNECTIONS 4 1558 #endif 1559 1560 /* The MTU size for the L2CAP configuration. */ 1561 #ifndef SDP_MTU_SIZE 1562 #define SDP_MTU_SIZE 672 1563 #endif 1564 1565 /* The flush timeout for the L2CAP configuration. */ 1566 #ifndef SDP_FLUSH_TO 1567 #define SDP_FLUSH_TO 0xFFFF 1568 #endif 1569 1570 /* The name for security authorization. */ 1571 #ifndef SDP_SERVICE_NAME 1572 #define SDP_SERVICE_NAME "Service Discovery" 1573 #endif 1574 1575 /* The security level for BTM. */ 1576 #ifndef SDP_SECURITY_LEVEL 1577 #define SDP_SECURITY_LEVEL BTM_SEC_NONE 1578 #endif 1579 1580 /****************************************************************************** 1581 ** 1582 ** RFCOMM 1583 ** 1584 ******************************************************************************/ 1585 #ifndef RFCOMM_INCLUDED 1586 #define RFCOMM_INCLUDED FALSE 1587 #endif 1588 1589 #if (RFCOMM_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) 1590 #define BT_RFCOMM_BQB_INCLUDED TRUE 1591 #else 1592 #define BT_RFCOMM_BQB_INCLUDED FALSE 1593 #endif 1594 1595 #ifndef BTA_JV_RFCOMM_INCLUDED 1596 #define BTA_JV_RFCOMM_INCLUDED FALSE 1597 #endif 1598 1599 /* The maximum number of ports supported. */ 1600 #ifndef MAX_RFC_PORTS 1601 #define MAX_RFC_PORTS 8 /*max is 30*/ 1602 #endif 1603 1604 /* The maximum simultaneous links to different devices. */ 1605 #ifndef MAX_ACL_CONNECTIONS 1606 #define MAX_BD_CONNECTIONS 3 /*max is 7*/ 1607 #else 1608 #define MAX_BD_CONNECTIONS MAX_ACL_CONNECTIONS 1609 #endif 1610 1611 /* The port receive queue low watermark level, in bytes. */ 1612 #ifndef PORT_RX_LOW_WM 1613 #define PORT_RX_LOW_WM (BTA_RFC_MTU_SIZE * PORT_RX_BUF_LOW_WM) 1614 #endif 1615 1616 /* The port receive queue high watermark level, in bytes. */ 1617 #ifndef PORT_RX_HIGH_WM 1618 #define PORT_RX_HIGH_WM (BTA_RFC_MTU_SIZE * PORT_RX_BUF_HIGH_WM) 1619 #endif 1620 1621 /* The port receive queue critical watermark level, in bytes. */ 1622 #ifndef PORT_RX_CRITICAL_WM 1623 #define PORT_RX_CRITICAL_WM (BTA_RFC_MTU_SIZE * PORT_RX_BUF_CRITICAL_WM) 1624 #endif 1625 1626 /* The port receive queue low watermark level, in number of buffers. */ 1627 #ifndef PORT_RX_BUF_LOW_WM 1628 #define PORT_RX_BUF_LOW_WM 4 1629 #endif 1630 1631 /* The port receive queue high watermark level, in number of buffers. */ 1632 #ifndef PORT_RX_BUF_HIGH_WM 1633 #define PORT_RX_BUF_HIGH_WM 10 1634 #endif 1635 1636 /* The port receive queue critical watermark level, in number of buffers. */ 1637 #ifndef PORT_RX_BUF_CRITICAL_WM 1638 #define PORT_RX_BUF_CRITICAL_WM 15 1639 #endif 1640 1641 /* The port transmit queue high watermark level, in bytes. */ 1642 #ifndef PORT_TX_HIGH_WM 1643 #define PORT_TX_HIGH_WM (BTA_RFC_MTU_SIZE * PORT_TX_BUF_HIGH_WM) 1644 #endif 1645 1646 /* The port transmit queue critical watermark level, in bytes. */ 1647 #ifndef PORT_TX_CRITICAL_WM 1648 #define PORT_TX_CRITICAL_WM (BTA_RFC_MTU_SIZE * PORT_TX_BUF_CRITICAL_WM) 1649 #endif 1650 1651 /* The port transmit queue high watermark level, in number of buffers. */ 1652 #ifndef PORT_TX_BUF_HIGH_WM 1653 #define PORT_TX_BUF_HIGH_WM 10 1654 #endif 1655 1656 /* The port transmit queue high watermark level, in number of buffers. */ 1657 #ifndef PORT_TX_BUF_CRITICAL_WM 1658 #define PORT_TX_BUF_CRITICAL_WM 15 1659 #endif 1660 1661 /* The RFCOMM multiplexer preferred flow control mechanism. */ 1662 #ifndef PORT_FC_DEFAULT 1663 #define PORT_FC_DEFAULT PORT_FC_CREDIT 1664 #endif 1665 1666 /* The maximum number of credits receiver sends to peer when using credit-based flow control. */ 1667 #ifndef PORT_CREDIT_RX_MAX 1668 #define PORT_CREDIT_RX_MAX 16 1669 #endif 1670 1671 /* The credit low watermark level. */ 1672 #ifndef PORT_CREDIT_RX_LOW 1673 #define PORT_CREDIT_RX_LOW 8 1674 #endif 1675 1676 /* ERTM Tx window size */ 1677 #ifndef RFC_FCR_OPT_TX_WINDOW_SIZE 1678 #define RFC_FCR_OPT_TX_WINDOW_SIZE 10 1679 #endif 1680 1681 /* ERTM Maximum transmissions before disconnecting */ 1682 #ifndef RFC_FCR_OPT_MAX_TX_B4_DISCNT 1683 #define RFC_FCR_OPT_MAX_TX_B4_DISCNT 20 1684 #endif 1685 1686 /* ERTM Retransmission timeout (2 secs) */ 1687 #ifndef RFC_FCR_OPT_RETX_TOUT 1688 #define RFC_FCR_OPT_RETX_TOUT 2000 1689 #endif 1690 1691 /* ERTM Monitor timeout (12 secs) */ 1692 #ifndef RFC_FCR_OPT_MONITOR_TOUT 1693 #define RFC_FCR_OPT_MONITOR_TOUT 12000 1694 #endif 1695 1696 /* ERTM ERTM MPS segment size */ 1697 #ifndef RFC_FCR_OPT_MAX_PDU_SIZE 1698 #define RFC_FCR_OPT_MAX_PDU_SIZE 1010 1699 #endif 1700 1701 /****************************************************************************** 1702 ** 1703 ** OBEX 1704 ** 1705 ******************************************************************************/ 1706 1707 /* 1708 * Buffer size to reassemble the SDU. 1709 * It will allow buffers to be used that are larger than the L2CAP_MAX_MTU. 1710 */ 1711 #ifndef OBX_USER_RX_BUF_SIZE 1712 #define OBX_USER_RX_BUF_SIZE OBX_LRG_DATA_BUF_SIZE 1713 #endif 1714 1715 /* 1716 * Buffer size to hold the SDU. 1717 * It will allow buffers to be used that are larger than the L2CAP_MAX_MTU. 1718 */ 1719 #ifndef OBX_USER_TX_BUF_SIZE 1720 #define OBX_USER_TX_BUF_SIZE OBX_LRG_DATA_BUF_SIZE 1721 #endif 1722 1723 /* Buffer size used to hold MPS segments during SDU reassembly. */ 1724 #ifndef OBX_FCR_RX_BUF_SIZE 1725 #define OBX_FCR_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 1726 #endif 1727 1728 /* 1729 * Buffer size used to hold MPS segments used in (re)transmissions. 1730 * The size of each buffer must be able to hold the maximum MPS segment size 1731 * passed in L2CA_SetFCROptions plus BT_HDR (8) + HCI preamble (4) + 1732 * L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). 1733 */ 1734 #ifndef OBX_FCR_TX_BUF_SIZE 1735 #define OBX_FCR_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 1736 #endif 1737 1738 /* 1739 * Size of the transmission window when using enhanced retransmission mode. Not used 1740 * in basic and streaming modes. Range: 1 - 63 1741 */ 1742 #ifndef OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR 1743 #define OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR 20 1744 #endif 1745 1746 /* 1747 * Number of transmission attempts for a single I-Frame before taking 1748 * Down the connection. Used In ERTM mode only. Value is Ignored in basic and 1749 * Streaming modes. 1750 * Range: 0, 1-0xFF 1751 * 0 - infinite retransmissions 1752 * 1 - single transmission 1753 */ 1754 #ifndef OBX_FCR_OPT_MAX_TX_B4_DISCNT 1755 #define OBX_FCR_OPT_MAX_TX_B4_DISCNT 20 1756 #endif 1757 1758 /* 1759 * Retransmission Timeout 1760 * Range: Minimum 2000 (2 secs) on BR/EDR when supporting PBF. 1761 */ 1762 #ifndef OBX_FCR_OPT_RETX_TOUT 1763 #define OBX_FCR_OPT_RETX_TOUT 2000 1764 #endif 1765 1766 /* 1767 * Monitor Timeout 1768 * Range: Minimum 12000 (12 secs) on BR/EDR when supporting PBF. 1769 */ 1770 #ifndef OBX_FCR_OPT_MONITOR_TOUT 1771 #define OBX_FCR_OPT_MONITOR_TOUT 12000 1772 #endif 1773 1774 /* 1775 * Maximum PDU payload size. 1776 * Suggestion: The maximum amount of data that will fit into a 3-DH5 packet. 1777 * Range: 2 octets 1778 */ 1779 #ifndef OBX_FCR_OPT_MAX_PDU_SIZE 1780 #define OBX_FCR_OPT_MAX_PDU_SIZE L2CAP_MPS_OVER_BR_EDR 1781 #endif 1782 1783 /* 1784 * Pool ID where to reassemble the SDU. 1785 * This Pool will allow buffers to be used that are larger than 1786 * the L2CAP_MAX_MTU. 1787 */ 1788 #ifndef OBX_USER_RX_POOL_ID 1789 #define OBX_USER_RX_POOL_ID 4 1790 #endif 1791 1792 /* 1793 * Pool ID where to hold the SDU. 1794 * This Pool will allow buffers to be used that are larger than 1795 * the L2CAP_MAX_MTU. 1796 */ 1797 #ifndef OBX_USER_TX_POOL_ID 1798 #define OBX_USER_TX_POOL_ID 4 1799 #endif 1800 1801 /* 1802 * GKI Buffer Pool ID used to hold MPS segments during SDU reassembly 1803 */ 1804 #ifndef OBX_FCR_RX_POOL_ID 1805 #define OBX_FCR_RX_POOL_ID 3 1806 #endif 1807 1808 /* 1809 * Pool ID used to hold MPS segments used in (re)transmissions. 1810 * L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool. 1811 * Note: This pool needs to have enough buffers to hold two times the window size negotiated 1812 * in the L2CA_SetFCROptions (2 * tx_win_size) to allow for retransmissions. 1813 * The size of each buffer must be able to hold the maximum MPS segment size passed in 1814 * L2CA_SetFCROptions plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). 1815 */ 1816 #ifndef OBX_FCR_TX_POOL_ID 1817 #define OBX_FCR_TX_POOL_ID 3 1818 #endif 1819 1820 1821 /****************************************************************************** 1822 ** 1823 ** BNEP 1824 ** 1825 ******************************************************************************/ 1826 1827 #ifndef BNEP_INCLUDED 1828 #define BNEP_INCLUDED FALSE 1829 #endif 1830 1831 /* BNEP status API call is used mainly to get the L2CAP handle */ 1832 #ifndef BNEP_SUPPORTS_STATUS_API 1833 #define BNEP_SUPPORTS_STATUS_API FALSE 1834 #endif 1835 1836 /* 1837 ** When BNEP connection changes roles after the connection is established 1838 ** we will do an authentication check again on the new role 1839 */ 1840 #ifndef BNEP_DO_AUTH_FOR_ROLE_SWITCH 1841 #define BNEP_DO_AUTH_FOR_ROLE_SWITCH FALSE 1842 #endif 1843 1844 1845 /* Maximum number of protocol filters supported. */ 1846 #ifndef BNEP_MAX_PROT_FILTERS 1847 #define BNEP_MAX_PROT_FILTERS 5 1848 #endif 1849 1850 /* Maximum number of multicast filters supported. */ 1851 #ifndef BNEP_MAX_MULTI_FILTERS 1852 #define BNEP_MAX_MULTI_FILTERS 5 1853 #endif 1854 1855 /* Minimum MTU size. */ 1856 #ifndef BNEP_MIN_MTU_SIZE 1857 #define BNEP_MIN_MTU_SIZE L2CAP_MTU_SIZE 1858 #endif 1859 1860 /* Preferred MTU size. */ 1861 #ifndef BNEP_MTU_SIZE 1862 #define BNEP_MTU_SIZE BNEP_MIN_MTU_SIZE 1863 #endif 1864 1865 /* Maximum number of buffers allowed in transmit data queue. */ 1866 #ifndef BNEP_MAX_XMITQ_DEPTH 1867 #define BNEP_MAX_XMITQ_DEPTH 20 1868 #endif 1869 1870 /* Maximum number BNEP of connections supported. */ 1871 #ifndef BNEP_MAX_CONNECTIONS 1872 #define BNEP_MAX_CONNECTIONS 7 1873 #endif 1874 1875 1876 /****************************************************************************** 1877 ** 1878 ** AVDTP 1879 ** 1880 ******************************************************************************/ 1881 1882 #ifndef AVDT_INCLUDED 1883 #define AVDT_INCLUDED TRUE 1884 #endif 1885 1886 /* Include reporting capability in AVDTP */ 1887 #ifndef AVDT_REPORTING 1888 #define AVDT_REPORTING TRUE 1889 #endif 1890 1891 /* Include multiplexing capability in AVDTP */ 1892 #ifndef AVDT_MULTIPLEXING 1893 #define AVDT_MULTIPLEXING TRUE 1894 #endif 1895 1896 /* Number of simultaneous links to different peer devices. */ 1897 #ifndef AVDT_NUM_LINKS 1898 #define AVDT_NUM_LINKS 2 1899 #endif 1900 1901 /* Number of simultaneous stream endpoints. */ 1902 #ifndef AVDT_NUM_SEPS 1903 #define AVDT_NUM_SEPS 3 1904 #endif 1905 1906 /* Number of transport channels setup per media stream(audio or video) */ 1907 #ifndef AVDT_NUM_CHANNELS 1908 1909 #if AVDT_REPORTING == TRUE 1910 /* signaling, media and reporting channels */ 1911 #define AVDT_NUM_CHANNELS 3 1912 #else 1913 /* signaling and media channels */ 1914 #define AVDT_NUM_CHANNELS 2 1915 #endif // AVDT_REPORTING 1916 1917 #endif // AVDT_NUM_CHANNELS 1918 1919 /* Number of transport channels setup by AVDT for all media streams 1920 * AVDT_NUM_CHANNELS * Number of simultaneous streams. 1921 */ 1922 #ifndef AVDT_NUM_TC_TBL 1923 #define AVDT_NUM_TC_TBL 6 1924 #endif 1925 1926 /* Maximum size in bytes of the codec capabilities information element. */ 1927 #ifndef AVDT_CODEC_SIZE 1928 #define AVDT_CODEC_SIZE 10 1929 #endif 1930 1931 /* Maximum size in bytes of the content protection information element. */ 1932 #ifndef AVDT_PROTECT_SIZE 1933 #define AVDT_PROTECT_SIZE 90 1934 #endif 1935 1936 /* Maximum number of GKI buffers in the fragment queue (for video frames). 1937 * Must be less than the number of buffers in the buffer pool of size AVDT_DATA_POOL_SIZE */ 1938 #ifndef AVDT_MAX_FRAG_COUNT 1939 #define AVDT_MAX_FRAG_COUNT 15 1940 #endif 1941 1942 /****************************************************************************** 1943 ** 1944 ** PAN 1945 ** 1946 ******************************************************************************/ 1947 1948 #ifndef PAN_INCLUDED 1949 #define PAN_INCLUDED FALSE 1950 #endif 1951 1952 /* This will enable the PANU role */ 1953 #ifndef PAN_SUPPORTS_ROLE_PANU 1954 #define PAN_SUPPORTS_ROLE_PANU FALSE 1955 #endif 1956 1957 /* This will enable the GN role */ 1958 #ifndef PAN_SUPPORTS_ROLE_GN 1959 #define PAN_SUPPORTS_ROLE_GN FALSE 1960 #endif 1961 1962 /* This will enable the NAP role */ 1963 #ifndef PAN_SUPPORTS_ROLE_NAP 1964 #define PAN_SUPPORTS_ROLE_NAP FALSE 1965 #endif 1966 1967 /* This is just for debugging purposes */ 1968 #ifndef PAN_SUPPORTS_DEBUG_DUMP 1969 #define PAN_SUPPORTS_DEBUG_DUMP FALSE 1970 #endif 1971 1972 /* Maximum number of PAN connections allowed */ 1973 #ifndef MAX_PAN_CONNS 1974 #define MAX_PAN_CONNS 7 1975 #endif 1976 1977 /* Default service name for NAP role */ 1978 #ifndef PAN_NAP_DEFAULT_SERVICE_NAME 1979 #define PAN_NAP_DEFAULT_SERVICE_NAME "Network Access Point Service" 1980 #endif 1981 1982 /* Default service name for GN role */ 1983 #ifndef PAN_GN_DEFAULT_SERVICE_NAME 1984 #define PAN_GN_DEFAULT_SERVICE_NAME "Group Network Service" 1985 #endif 1986 1987 /* Default service name for PANU role */ 1988 #ifndef PAN_PANU_DEFAULT_SERVICE_NAME 1989 #define PAN_PANU_DEFAULT_SERVICE_NAME "PAN User Service" 1990 #endif 1991 1992 /* Default description for NAP role service */ 1993 #ifndef PAN_NAP_DEFAULT_DESCRIPTION 1994 #define PAN_NAP_DEFAULT_DESCRIPTION "NAP" 1995 #endif 1996 1997 /* Default description for GN role service */ 1998 #ifndef PAN_GN_DEFAULT_DESCRIPTION 1999 #define PAN_GN_DEFAULT_DESCRIPTION "GN" 2000 #endif 2001 2002 /* Default description for PANU role service */ 2003 #ifndef PAN_PANU_DEFAULT_DESCRIPTION 2004 #define PAN_PANU_DEFAULT_DESCRIPTION "PANU" 2005 #endif 2006 2007 /* Default Security level for PANU role. */ 2008 #ifndef PAN_PANU_SECURITY_LEVEL 2009 #define PAN_PANU_SECURITY_LEVEL 0 2010 #endif 2011 2012 /* Default Security level for GN role. */ 2013 #ifndef PAN_GN_SECURITY_LEVEL 2014 #define PAN_GN_SECURITY_LEVEL 0 2015 #endif 2016 2017 /* Default Security level for NAP role. */ 2018 #ifndef PAN_NAP_SECURITY_LEVEL 2019 #define PAN_NAP_SECURITY_LEVEL 0 2020 #endif 2021 2022 /****************************************************************************** 2023 ** 2024 ** HFP 2025 ** 2026 ******************************************************************************/ 2027 2028 #if (BTC_HF_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) 2029 #define BT_HF_AG_BQB_INCLUDED TRUE 2030 #else 2031 #define BT_HF_AG_BQB_INCLUDED FALSE 2032 #endif 2033 2034 #if (BTC_HF_CLIENT_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) 2035 #define BT_HF_CLIENT_BQB_INCLUDED TRUE 2036 #else 2037 #define BT_HF_CLIENT_BQB_INCLUDED FALSE 2038 #endif 2039 2040 /****************************************************************************** 2041 ** 2042 ** GAP 2043 ** 2044 ******************************************************************************/ 2045 2046 #ifndef GAP_INCLUDED 2047 #define GAP_INCLUDED TRUE 2048 #endif 2049 2050 /* This is set to enable posting event for data write */ 2051 #ifndef GAP_CONN_POST_EVT_INCLUDED 2052 #define GAP_CONN_POST_EVT_INCLUDED FALSE 2053 #endif 2054 2055 /* The maximum number of simultaneous GAP L2CAP connections. */ 2056 #ifndef GAP_MAX_CONNECTIONS 2057 #define GAP_MAX_CONNECTIONS 10 // 30 2058 #endif 2059 2060 /* keep the raw data received from SDP server in database. */ 2061 #ifndef SDP_RAW_DATA_INCLUDED 2062 #define SDP_RAW_DATA_INCLUDED TRUE 2063 #endif 2064 2065 /* Inquiry duration in 1.28 second units. */ 2066 #ifndef SDP_DEBUG 2067 #define SDP_DEBUG TRUE 2068 #endif 2069 2070 /****************************************************************************** 2071 ** 2072 ** HID 2073 ** 2074 ******************************************************************************/ 2075 #ifndef BT_HID_INCLUDED 2076 #define BT_HID_INCLUDED FALSE 2077 #endif 2078 2079 /* HID Device Role Included */ 2080 #ifndef HID_DEV_INCLUDED 2081 #define HID_DEV_INCLUDED FALSE 2082 #endif 2083 2084 #ifndef HID_DEV_SUBCLASS 2085 #define HID_DEV_SUBCLASS COD_MINOR_POINTING 2086 #endif 2087 2088 #ifndef HID_CONTROL_BUF_SIZE 2089 #define HID_CONTROL_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2090 #endif 2091 2092 #ifndef HID_INTERRUPT_BUF_SIZE 2093 #define HID_INTERRUPT_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2094 #endif 2095 2096 #ifndef HID_DEV_MTU_SIZE 2097 #define HID_DEV_MTU_SIZE 64 2098 #endif 2099 2100 #ifndef HID_DEV_FLUSH_TO 2101 #define HID_DEV_FLUSH_TO 0xffff 2102 #endif 2103 2104 #if (BTA_HD_INCLUDED == TRUE) && (HID_DEV_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) 2105 #define BT_HID_DEVICE_BQB_INCLUDED TRUE 2106 #else 2107 #define BT_HID_DEVICE_BQB_INCLUDED FALSE 2108 #endif 2109 2110 /************************************************************************* 2111 ** Definitions for Both HID-Host & Device 2112 */ 2113 #ifndef HID_MAX_SVC_NAME_LEN 2114 #define HID_MAX_SVC_NAME_LEN 32 2115 #endif 2116 2117 #ifndef HID_MAX_SVC_DESCR_LEN 2118 #define HID_MAX_SVC_DESCR_LEN 32 2119 #endif 2120 2121 #ifndef HID_MAX_PROV_NAME_LEN 2122 #define HID_MAX_PROV_NAME_LEN 32 2123 #endif 2124 2125 /************************************************************************* 2126 ** Definitions for HID-Host 2127 */ 2128 #ifndef HID_HOST_INCLUDED 2129 #define HID_HOST_INCLUDED FALSE 2130 #endif 2131 2132 #ifndef HID_HOST_MAX_DEVICES 2133 #define HID_HOST_MAX_DEVICES 7 2134 #endif 2135 2136 #ifndef HID_HOST_MTU 2137 #define HID_HOST_MTU 640 2138 #endif 2139 2140 #ifndef HID_HOST_FLUSH_TO 2141 #define HID_HOST_FLUSH_TO 0xffff 2142 #endif 2143 2144 #ifndef HID_HOST_MAX_CONN_RETRY 2145 #define HID_HOST_MAX_CONN_RETRY (3) 2146 #endif 2147 2148 #ifndef HID_HOST_REPAGE_WIN 2149 #define HID_HOST_REPAGE_WIN (2) 2150 #endif 2151 2152 /************************************************************************* 2153 * A2DP Definitions 2154 */ 2155 #ifndef A2D_INCLUDED 2156 #define A2D_INCLUDED FALSE 2157 #endif 2158 2159 #if (BTC_AV_SRC_INCLUDED == TRUE) && (BT_CLASSIC_BQB_INCLUDED == TRUE) 2160 #define A2D_SRC_BQB_INCLUDED TRUE 2161 #else 2162 #define A2D_SRC_BQB_INCLUDED FALSE 2163 #endif 2164 2165 /****************************************************************************** 2166 ** 2167 ** AVCTP 2168 ** 2169 ******************************************************************************/ 2170 2171 /* Number of simultaneous ACL links to different peer devices. */ 2172 #ifndef AVCT_NUM_LINKS 2173 #define AVCT_NUM_LINKS 2 2174 #endif 2175 2176 /* Number of simultaneous AVCTP connections. */ 2177 #ifndef AVCT_NUM_CONN 2178 #define AVCT_NUM_CONN 3 2179 #endif 2180 2181 /****************************************************************************** 2182 ** 2183 ** AVRCP 2184 ** 2185 ******************************************************************************/ 2186 #ifndef AVRC_INCLUDED 2187 #define AVRC_INCLUDED FALSE 2188 #endif 2189 2190 #ifndef AVRC_METADATA_INCLUDED 2191 #if AVRC_INCLUDED == TRUE 2192 #define AVRC_METADATA_INCLUDED TRUE 2193 #else 2194 #define AVRC_METADATA_INCLUDED FALSE 2195 #endif 2196 #endif 2197 2198 #ifndef AVRC_ADV_CTRL_INCLUDED 2199 #if AVRC_INCLUDED == TRUE 2200 #define AVRC_ADV_CTRL_INCLUDED TRUE 2201 #else 2202 #define AVRC_ADV_CTRL_INCLUDED FALSE 2203 #endif 2204 #endif 2205 2206 #ifndef AVRC_CTLR_INCLUDED 2207 #if AVRC_INCLUDED == TRUE 2208 #define AVRC_CTLR_INCLUDED TRUE 2209 #else 2210 #define AVRC_CTLR_INCLUDED FALSE 2211 #endif 2212 #endif 2213 2214 /****************************************************************************** 2215 ** 2216 ** MCAP 2217 ** 2218 ******************************************************************************/ 2219 #ifndef MCA_INCLUDED 2220 #define MCA_INCLUDED FALSE 2221 #endif 2222 2223 /* The MTU size for the L2CAP configuration on control channel. 48 is the minimal */ 2224 #ifndef MCA_CTRL_MTU 2225 #define MCA_CTRL_MTU 60 2226 #endif 2227 2228 /* The maximum number of registered MCAP instances. */ 2229 #ifndef MCA_NUM_REGS 2230 #define MCA_NUM_REGS 12 2231 #endif 2232 2233 /* The maximum number of control channels (to difference devices) per registered MCAP instances. */ 2234 #ifndef MCA_NUM_LINKS 2235 #define MCA_NUM_LINKS 3 2236 #endif 2237 2238 /* The maximum number of MDEP (including HDP echo) per registered MCAP instances. */ 2239 #ifndef MCA_NUM_DEPS 2240 #define MCA_NUM_DEPS 13 2241 #endif 2242 2243 /* The maximum number of MDL link per control channel. */ 2244 #ifndef MCA_NUM_MDLS 2245 #define MCA_NUM_MDLS 4 2246 #endif 2247 2248 /* Buffer size to reassemble the SDU. */ 2249 #ifndef MCA_USER_RX_BUF_SIZE 2250 #define MCA_USER_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2251 #endif 2252 2253 /* Buffer size to hold the SDU. */ 2254 #ifndef MCA_USER_TX_BUF_SIZE 2255 #define MCA_USER_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2256 #endif 2257 2258 /* 2259 * Buffer size used to hold MPS segments during SDU reassembly 2260 */ 2261 #ifndef MCA_FCR_RX_BUF_SIZE 2262 #define MCA_FCR_RX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2263 #endif 2264 2265 /* 2266 * Default buffer size used to hold MPS segments used in (re)transmissions. 2267 * The size of each buffer must be able to hold the maximum MPS segment size 2268 * passed in tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + 2269 * L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec). 2270 */ 2271 #ifndef MCA_FCR_TX_BUF_SIZE 2272 #define MCA_FCR_TX_BUF_SIZE BT_DEFAULT_BUFFER_SIZE 2273 #endif 2274 2275 /* MCAP control channel FCR Option: 2276 Size of the transmission window when using enhanced retransmission mode. 2277 1 is defined by HDP specification for control channel. 2278 */ 2279 #ifndef MCA_FCR_OPT_TX_WINDOW_SIZE 2280 #define MCA_FCR_OPT_TX_WINDOW_SIZE 1 2281 #endif 2282 2283 /* MCAP control channel FCR Option: 2284 Number of transmission attempts for a single I-Frame before taking 2285 Down the connection. Used In ERTM mode only. Value is Ignored in basic and 2286 Streaming modes. 2287 Range: 0, 1-0xFF 2288 0 - infinite retransmissions 2289 1 - single transmission 2290 */ 2291 #ifndef MCA_FCR_OPT_MAX_TX_B4_DISCNT 2292 #define MCA_FCR_OPT_MAX_TX_B4_DISCNT 20 2293 #endif 2294 2295 /* MCAP control channel FCR Option: Retransmission Timeout 2296 The AVRCP specification set a value in the range of 300 - 2000 ms 2297 Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode. 2298 Range: Minimum 2000 (2 secs) when supporting PBF. 2299 */ 2300 #ifndef MCA_FCR_OPT_RETX_TOUT 2301 #define MCA_FCR_OPT_RETX_TOUT 2000 2302 #endif 2303 2304 /* MCAP control channel FCR Option: Monitor Timeout 2305 The AVRCP specification set a value in the range of 300 - 2000 ms 2306 Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode. 2307 Range: Minimum 12000 (12 secs) when supporting PBF. 2308 */ 2309 #ifndef MCA_FCR_OPT_MONITOR_TOUT 2310 #define MCA_FCR_OPT_MONITOR_TOUT 12000 2311 #endif 2312 2313 /* MCAP control channel FCR Option: Maximum PDU payload size. 2314 The maximum number of payload octets that the local device can receive in a single PDU. 2315 */ 2316 #ifndef MCA_FCR_OPT_MPS_SIZE 2317 #define MCA_FCR_OPT_MPS_SIZE 1000 2318 #endif 2319 2320 /* Shared transport */ 2321 #ifndef NFC_SHARED_TRANSPORT_ENABLED 2322 #define NFC_SHARED_TRANSPORT_ENABLED FALSE 2323 #endif 2324 2325 /****************************************************************************** 2326 ** 2327 ** Sleep Mode (Low Power Mode) 2328 ** 2329 ******************************************************************************/ 2330 2331 #ifndef HCILP_INCLUDED 2332 #define HCILP_INCLUDED FALSE 2333 #endif 2334 2335 /****************************************************************************** 2336 ** 2337 ** APPL - Application Task 2338 ** 2339 ******************************************************************************/ 2340 2341 #define L2CAP_FEATURE_REQ_ID 73 2342 #define L2CAP_FEATURE_RSP_ID 173 2343 2344 /****************************************************************************** 2345 ** 2346 ** BTA 2347 ** 2348 ******************************************************************************/ 2349 /* BTA EIR canned UUID list (default is dynamic) */ 2350 #ifndef BTA_EIR_CANNED_UUID_LIST 2351 #define BTA_EIR_CANNED_UUID_LIST FALSE 2352 #endif 2353 2354 /* Number of supported customer UUID in EIR */ 2355 #ifndef BTA_EIR_SERVER_NUM_CUSTOM_UUID 2356 #define BTA_EIR_SERVER_NUM_CUSTOM_UUID 8 2357 #endif 2358 2359 /* CHLD override for bluedroid */ 2360 #ifndef BTA_AG_CHLD_VAL_ECC 2361 #define BTA_AG_CHLD_VAL_ECC "(0,1,1x,2,2x,3)" 2362 #endif 2363 2364 #ifndef BTA_AG_CHLD_VAL 2365 #define BTA_AG_CHLD_VAL "(0,1,2,3)" 2366 #endif 2367 2368 /* Set the CIND to match HFP 1.5 */ 2369 #ifndef BTA_AG_CIND_INFO 2370 #define BTA_AG_CIND_INFO "(\"call\",(0,1)),(\"callsetup\",(0-3)),(\"service\",(0-1)),(\"signal\",(0-5)),(\"roam\",(0,1)),(\"battchg\",(0-5)),(\"callheld\",(0-2))" 2371 #endif 2372 2373 #ifndef BTA_DM_AVOID_A2DP_ROLESWITCH_ON_INQUIRY 2374 #define BTA_DM_AVOID_A2DP_ROLESWITCH_ON_INQUIRY FALSE 2375 #endif 2376 2377 #ifndef BTA_GATTC_MAX_CACHE_CHAR 2378 #define BTA_GATTC_MAX_CACHE_CHAR UC_BT_GATTC_MAX_CACHE_CHAR 2379 #endif 2380 2381 /****************************************************************************** 2382 ** 2383 ** Tracing: Include trace header file here. 2384 ** 2385 ******************************************************************************/ 2386 2387 /* Enable/disable BTSnoop memory logging */ 2388 #ifndef BTSNOOP_MEM 2389 #define BTSNOOP_MEM FALSE 2390 #endif 2391 2392 #include "common/bt_trace.h" 2393 2394 #endif /* BT_TARGET_H */ 2395
