1 // Copyright 2017-2019 Espressif Systems (Shanghai) PTE LTD 2 // 3 // Licensed under the Apache License, Version 2.0 (the "License"); 4 // you may not use this file except in compliance with the License. 5 // You may obtain a copy of the License at 6 7 // http://www.apache.org/licenses/LICENSE-2.0 8 // 9 // Unless required by applicable law or agreed to in writing, software 10 // distributed under the License is distributed on an "AS IS" BASIS, 11 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 12 // See the License for the specific language governing permissions and 13 // limitations under the License. 14 15 #ifndef _ESP_BLE_MESH_DEFS_H_ 16 #define _ESP_BLE_MESH_DEFS_H_ 17 18 #include <stdint.h> 19 20 #include "mesh_config.h" 21 #include "mesh_common.h" 22 #include "proxy_server.h" 23 #include "provisioner_main.h" 24 25 #ifdef CONFIG_BT_BLUEDROID_ENABLED 26 #include "esp_bt_defs.h" 27 #include "esp_bt_main.h" 28 #define ESP_BLE_HOST_STATUS_ENABLED ESP_BLUEDROID_STATUS_ENABLED 29 #define ESP_BLE_HOST_STATUS_CHECK(status) ESP_BLUEDROID_STATUS_CHECK(status) 30 #else 31 #define ESP_BLE_HOST_STATUS_ENABLED 0 32 #define ESP_BLE_HOST_STATUS_CHECK(status) do {} while (0) 33 #endif 34 35 #ifdef __cplusplus 36 extern "C" { 37 #endif 38 39 /*!< The maximum length of a BLE Mesh message, including Opcode, Payload and TransMIC */ 40 #define ESP_BLE_MESH_SDU_MAX_LEN 384 41 42 /*!< Length of a short Mesh MIC. */ 43 #define ESP_BLE_MESH_MIC_SHORT 4 44 45 /*!< Length of a long Mesh MIC. */ 46 #define ESP_BLE_MESH_MIC_LONG 8 47 48 /*!< The maximum length of a BLE Mesh provisioned node name */ 49 #define ESP_BLE_MESH_NODE_NAME_MAX_LEN 31 50 51 /*!< The maximum length of a BLE Mesh unprovisioned device name */ 52 #define ESP_BLE_MESH_DEVICE_NAME_MAX_LEN DEVICE_NAME_SIZE 53 54 /*!< The maximum length of settings user id */ 55 #define ESP_BLE_MESH_SETTINGS_UID_SIZE 20 56 57 /*!< Invalid settings index */ 58 #define ESP_BLE_MESH_INVALID_SETTINGS_IDX 0xFF 59 60 /*!< Define the BLE Mesh octet 16 bytes size */ 61 #define ESP_BLE_MESH_OCTET16_LEN 16 62 typedef uint8_t esp_ble_mesh_octet16_t[ESP_BLE_MESH_OCTET16_LEN]; 63 64 /*!< Define the BLE Mesh octet 8 bytes size */ 65 #define ESP_BLE_MESH_OCTET8_LEN 8 66 typedef uint8_t esp_ble_mesh_octet8_t[ESP_BLE_MESH_OCTET8_LEN]; 67 68 /*!< Invalid Company ID */ 69 #define ESP_BLE_MESH_CID_NVAL 0xFFFF 70 71 /*!< Special TTL value to request using configured default TTL */ 72 #define ESP_BLE_MESH_TTL_DEFAULT 0xFF 73 74 /*!< Maximum allowed TTL value */ 75 #define ESP_BLE_MESH_TTL_MAX 0x7F 76 77 #define ESP_BLE_MESH_ADDR_UNASSIGNED 0x0000 78 #define ESP_BLE_MESH_ADDR_ALL_NODES 0xFFFF 79 #define ESP_BLE_MESH_ADDR_PROXIES 0xFFFC 80 #define ESP_BLE_MESH_ADDR_FRIENDS 0xFFFD 81 #define ESP_BLE_MESH_ADDR_RELAYS 0xFFFE 82 83 #define ESP_BLE_MESH_KEY_UNUSED 0xFFFF 84 #define ESP_BLE_MESH_KEY_DEV 0xFFFE 85 86 #define ESP_BLE_MESH_KEY_PRIMARY 0x0000 87 #define ESP_BLE_MESH_KEY_ANY 0xFFFF 88 89 /*!< Primary Network Key index */ 90 #define ESP_BLE_MESH_NET_PRIMARY 0x000 91 92 /*!< Relay state value */ 93 #define ESP_BLE_MESH_RELAY_DISABLED 0x00 94 #define ESP_BLE_MESH_RELAY_ENABLED 0x01 95 #define ESP_BLE_MESH_RELAY_NOT_SUPPORTED 0x02 96 97 /*!< Beacon state value */ 98 #define ESP_BLE_MESH_BEACON_DISABLED 0x00 99 #define ESP_BLE_MESH_BEACON_ENABLED 0x01 100 101 /*!< GATT Proxy state value */ 102 #define ESP_BLE_MESH_GATT_PROXY_DISABLED 0x00 103 #define ESP_BLE_MESH_GATT_PROXY_ENABLED 0x01 104 #define ESP_BLE_MESH_GATT_PROXY_NOT_SUPPORTED 0x02 105 106 /*!< Friend state value */ 107 #define ESP_BLE_MESH_FRIEND_DISABLED 0x00 108 #define ESP_BLE_MESH_FRIEND_ENABLED 0x01 109 #define ESP_BLE_MESH_FRIEND_NOT_SUPPORTED 0x02 110 111 /*!< Node identity state value */ 112 #define ESP_BLE_MESH_NODE_IDENTITY_STOPPED 0x00 113 #define ESP_BLE_MESH_NODE_IDENTITY_RUNNING 0x01 114 #define ESP_BLE_MESH_NODE_IDENTITY_NOT_SUPPORTED 0x02 115 116 /*!< Supported features */ 117 #define ESP_BLE_MESH_FEATURE_RELAY BIT(0) 118 #define ESP_BLE_MESH_FEATURE_PROXY BIT(1) 119 #define ESP_BLE_MESH_FEATURE_FRIEND BIT(2) 120 #define ESP_BLE_MESH_FEATURE_LOW_POWER BIT(3) 121 #define ESP_BLE_MESH_FEATURE_ALL_SUPPORTED (ESP_BLE_MESH_FEATURE_RELAY | \ 122 ESP_BLE_MESH_FEATURE_PROXY | \ 123 ESP_BLE_MESH_FEATURE_FRIEND | \ 124 ESP_BLE_MESH_FEATURE_LOW_POWER) 125 126 #define ESP_BLE_MESH_ADDR_IS_UNICAST(addr) ((addr) && (addr) < 0x8000) 127 #define ESP_BLE_MESH_ADDR_IS_GROUP(addr) ((addr) >= 0xC000 && (addr) <= 0xFF00) 128 #define ESP_BLE_MESH_ADDR_IS_VIRTUAL(addr) ((addr) >= 0x8000 && (addr) < 0xC000) 129 #define ESP_BLE_MESH_ADDR_IS_RFU(addr) ((addr) >= 0xFF00 && (addr) <= 0xFFFB) 130 131 #define ESP_BLE_MESH_INVALID_NODE_INDEX 0xFFFF 132 133 /** @def ESP_BLE_MESH_TRANSMIT 134 * 135 * @brief Encode transmission count & interval steps. 136 * 137 * @note For example, ESP_BLE_MESH_TRANSMIT(2, 20) means that the message 138 * will be sent about 90ms(count is 3, step is 1, interval is 30 ms 139 * which includes 10ms of advertising interval random delay). 140 * 141 * @param count Number of retransmissions (first transmission is excluded). 142 * @param int_ms Interval steps in milliseconds. Must be greater than 0 143 * and a multiple of 10. 144 * 145 * @return BLE Mesh transmit value that can be used e.g. for the default 146 * values of the Configuration Model data. 147 */ 148 #define ESP_BLE_MESH_TRANSMIT(count, int_ms) ((count) | (((int_ms / 10) - 1) << 3)) 149 150 /** @def ESP_BLE_MESH_GET_TRANSMIT_COUNT 151 * 152 * @brief Decode transmit count from a transmit value. 153 * 154 * @param transmit Encoded transmit count & interval value. 155 * 156 * @return Transmission count (actual transmissions equal to N + 1). 157 */ 158 #define ESP_BLE_MESH_GET_TRANSMIT_COUNT(transmit) (((transmit) & (uint8_t)BIT_MASK(3))) 159 160 /** @def ESP_BLE_MESH_GET_TRANSMIT_INTERVAL 161 * 162 * @brief Decode transmit interval from a transmit value. 163 * 164 * @param transmit Encoded transmit count & interval value. 165 * 166 * @return Transmission interval in milliseconds. 167 */ 168 #define ESP_BLE_MESH_GET_TRANSMIT_INTERVAL(transmit) ((((transmit) >> 3) + 1) * 10) 169 170 /** @def ESP_BLE_MESH_PUBLISH_TRANSMIT 171 * 172 * @brief Encode Publish Retransmit count & interval steps. 173 * 174 * @param count Number of retransmissions (first transmission is excluded). 175 * @param int_ms Interval steps in milliseconds. Must be greater than 0 176 * and a multiple of 50. 177 * 178 * @return BLE Mesh transmit value that can be used e.g. for the default 179 * values of the Configuration Model data. 180 */ 181 #define ESP_BLE_MESH_PUBLISH_TRANSMIT(count, int_ms) ESP_BLE_MESH_TRANSMIT(count, (int_ms) / 5) 182 183 /** @def ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_COUNT 184 * 185 * @brief Decode Publish Retransmit count from a given value. 186 * 187 * @param transmit Encoded Publish Retransmit count & interval value. 188 * 189 * @return Retransmission count (actual transmissions equal to N + 1). 190 */ 191 #define ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_COUNT(transmit) ESP_BLE_MESH_GET_TRANSMIT_COUNT(transmit) 192 193 /** @def ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_INTERVAL 194 * 195 * @brief Decode Publish Retransmit interval from a given value. 196 * 197 * @param transmit Encoded Publish Retransmit count & interval value. 198 * 199 * @return Transmission interval in milliseconds. 200 */ 201 #define ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_INTERVAL(transmit) ((((transmit) >> 3) + 1) * 50) 202 203 /*!< Callbacks which are not needed to be initialized by users (set with 0 and will be initialized internally) */ 204 typedef uint32_t esp_ble_mesh_cb_t; 205 206 typedef enum { 207 ESP_BLE_MESH_TYPE_PROV_CB, 208 ESP_BLE_MESH_TYPE_OUTPUT_NUM_CB, 209 ESP_BLE_MESH_TYPE_OUTPUT_STR_CB, 210 ESP_BLE_MESH_TYPE_INTPUT_CB, 211 ESP_BLE_MESH_TYPE_LINK_OPEN_CB, 212 ESP_BLE_MESH_TYPE_LINK_CLOSE_CB, 213 ESP_BLE_MESH_TYPE_COMPLETE_CB, 214 ESP_BLE_MESH_TYPE_RESET_CB, 215 } esp_ble_mesh_cb_type_t; 216 217 /*!< This enum value is provisioning authentication oob method */ 218 typedef enum { 219 ESP_BLE_MESH_NO_OOB, 220 ESP_BLE_MESH_STATIC_OOB, 221 ESP_BLE_MESH_OUTPUT_OOB, 222 ESP_BLE_MESH_INPUT_OOB, 223 } esp_ble_mesh_oob_method_t; 224 225 /*!< This enum value is associated with bt_mesh_output_action_t in mesh_main.h */ 226 typedef enum { 227 ESP_BLE_MESH_NO_OUTPUT = 0, 228 ESP_BLE_MESH_BLINK = BIT(0), 229 ESP_BLE_MESH_BEEP = BIT(1), 230 ESP_BLE_MESH_VIBRATE = BIT(2), 231 ESP_BLE_MESH_DISPLAY_NUMBER = BIT(3), 232 ESP_BLE_MESH_DISPLAY_STRING = BIT(4), 233 } esp_ble_mesh_output_action_t; 234 235 /*!< This enum value is associated with bt_mesh_input_action_t in mesh_main.h */ 236 typedef enum { 237 ESP_BLE_MESH_NO_INPUT = 0, 238 ESP_BLE_MESH_PUSH = BIT(0), 239 ESP_BLE_MESH_TWIST = BIT(1), 240 ESP_BLE_MESH_ENTER_NUMBER = BIT(2), 241 ESP_BLE_MESH_ENTER_STRING = BIT(3), 242 } esp_ble_mesh_input_action_t; 243 244 /*!< This enum value is associated with bt_mesh_prov_bearer_t in mesh_main.h */ 245 typedef enum { 246 ESP_BLE_MESH_PROV_ADV = BIT(0), 247 ESP_BLE_MESH_PROV_GATT = BIT(1), 248 } esp_ble_mesh_prov_bearer_t; 249 250 /*!< This enum value is associated with bt_mesh_prov_oob_info_t in mesh_main.h */ 251 typedef enum { 252 ESP_BLE_MESH_PROV_OOB_OTHER = BIT(0), 253 ESP_BLE_MESH_PROV_OOB_URI = BIT(1), 254 ESP_BLE_MESH_PROV_OOB_2D_CODE = BIT(2), 255 ESP_BLE_MESH_PROV_OOB_BAR_CODE = BIT(3), 256 ESP_BLE_MESH_PROV_OOB_NFC = BIT(4), 257 ESP_BLE_MESH_PROV_OOB_NUMBER = BIT(5), 258 ESP_BLE_MESH_PROV_OOB_STRING = BIT(6), 259 /* 7 - 10 are reserved */ 260 ESP_BLE_MESH_PROV_OOB_ON_BOX = BIT(11), 261 ESP_BLE_MESH_PROV_OOB_IN_BOX = BIT(12), 262 ESP_BLE_MESH_PROV_OOB_ON_PAPER = BIT(13), 263 ESP_BLE_MESH_PROV_OOB_IN_MANUAL = BIT(14), 264 ESP_BLE_MESH_PROV_OOB_ON_DEV = BIT(15), 265 } esp_ble_mesh_prov_oob_info_t; 266 267 /*!< Maximum length of value used by Static OOB authentication */ 268 #define ESP_BLE_MESH_PROV_STATIC_OOB_MAX_LEN 16 269 270 /*!< Maximum length of string used by Output OOB authentication */ 271 #define ESP_BLE_MESH_PROV_OUTPUT_OOB_MAX_LEN 8 272 273 /*!< Maximum length of string used by Output OOB authentication */ 274 #define ESP_BLE_MESH_PROV_INPUT_OOB_MAX_LEN 8 275 276 /*!< Macros used to define message opcode */ 277 #define ESP_BLE_MESH_MODEL_OP_1(b0) (b0) 278 #define ESP_BLE_MESH_MODEL_OP_2(b0, b1) (((b0) << 8) | (b1)) 279 #define ESP_BLE_MESH_MODEL_OP_3(b0, cid) ((((b0) << 16) | 0xC00000) | (cid)) 280 281 /*!< This macro is associated with BLE_MESH_MODEL_CB in mesh_access.h */ 282 #define ESP_BLE_MESH_SIG_MODEL(_id, _op, _pub, _user_data) \ 283 { \ 284 .model_id = (_id), \ 285 .op = _op, \ 286 .keys = { [0 ... (CONFIG_BLE_MESH_MODEL_KEY_COUNT - 1)] = \ 287 ESP_BLE_MESH_KEY_UNUSED }, \ 288 .pub = _pub, \ 289 .groups = { [0 ... (CONFIG_BLE_MESH_MODEL_GROUP_COUNT - 1)] = \ 290 ESP_BLE_MESH_ADDR_UNASSIGNED }, \ 291 .user_data = _user_data, \ 292 } 293 294 /*!< This macro is associated with BLE_MESH_MODEL_VND_CB in mesh_access.h */ 295 #define ESP_BLE_MESH_VENDOR_MODEL(_company, _id, _op, _pub, _user_data) \ 296 { \ 297 .vnd.company_id = (_company), \ 298 .vnd.model_id = (_id), \ 299 .op = _op, \ 300 .pub = _pub, \ 301 .keys = { [0 ... (CONFIG_BLE_MESH_MODEL_KEY_COUNT - 1)] = \ 302 ESP_BLE_MESH_KEY_UNUSED }, \ 303 .groups = { [0 ... (CONFIG_BLE_MESH_MODEL_GROUP_COUNT - 1)] = \ 304 ESP_BLE_MESH_ADDR_UNASSIGNED }, \ 305 .user_data = _user_data, \ 306 } 307 308 /** @brief Helper to define a BLE Mesh element within an array. 309 * 310 * In case the element has no SIG or Vendor models, the helper 311 * macro ESP_BLE_MESH_MODEL_NONE can be given instead. 312 * 313 * @note This macro is associated with BLE_MESH_ELEM in mesh_access.h 314 * 315 * @param _loc Location Descriptor. 316 * @param _mods Array of SIG models. 317 * @param _vnd_mods Array of vendor models. 318 */ 319 #define ESP_BLE_MESH_ELEMENT(_loc, _mods, _vnd_mods) \ 320 { \ 321 .location = (_loc), \ 322 .sig_model_count = ARRAY_SIZE(_mods), \ 323 .sig_models = (_mods), \ 324 .vnd_model_count = ARRAY_SIZE(_vnd_mods), \ 325 .vnd_models = (_vnd_mods), \ 326 } 327 328 #define ESP_BLE_MESH_PROV(uuid, sta_val, sta_val_len, out_size, out_act, in_size, in_act) { \ 329 .uuid = uuid, \ 330 .static_val = sta_val, \ 331 .static_val_len = sta_val_len, \ 332 .output_size = out_size, \ 333 .output_action = out_act, \ 334 .input_size = in_size, \ 335 .input_action = in_act, \ 336 } 337 338 typedef uint8_t UINT8; 339 typedef uint16_t UINT16; 340 typedef uint32_t UINT32; 341 typedef uint64_t UINT64; 342 343 #define BT_OCTET32_LEN 32 344 typedef UINT8 BT_OCTET32[BT_OCTET32_LEN]; /* octet array: size 32 */ 345 346 347 #ifndef BD_ADDR_LEN 348 #define BD_ADDR_LEN 6 349 typedef uint8_t BD_ADDR[BD_ADDR_LEN]; 350 #endif 351 352 typedef uint8_t esp_ble_mesh_bd_addr_t[BD_ADDR_LEN]; 353 354 #define ESP_BLE_MESH_ADDR_TYPE_PUBLIC 0x00 355 #define ESP_BLE_MESH_ADDR_TYPE_RANDOM 0x01 356 #define ESP_BLE_MESH_ADDR_TYPE_RPA_PUBLIC 0x02 357 #define ESP_BLE_MESH_ADDR_TYPE_RPA_RANDOM 0x03 358 /// BLE device address type 359 typedef uint8_t esp_ble_mesh_addr_type_t; 360 361 /** BLE Mesh deinit parameters */ 362 typedef struct { 363 bool erase_flash; /*!< Indicate if erasing flash when deinit mesh stack */ 364 } esp_ble_mesh_deinit_param_t; 365 366 typedef struct esp_ble_mesh_model esp_ble_mesh_model_t; 367 368 /** Abstraction that describes a BLE Mesh Element. 369 * This structure is associated with struct bt_mesh_elem in mesh_access.h 370 */ 371 typedef struct { 372 /** Element Address, assigned during provisioning. */ 373 uint16_t element_addr; 374 375 /** Location Descriptor (GATT Bluetooth Namespace Descriptors) */ 376 const uint16_t location; 377 378 const uint8_t sig_model_count; /*!< SIG Model count */ 379 const uint8_t vnd_model_count; /*!< Vendor Model count */ 380 381 esp_ble_mesh_model_t *sig_models; /*!< SIG Models */ 382 esp_ble_mesh_model_t *vnd_models; /*!< Vendor Models */ 383 } esp_ble_mesh_elem_t; 384 385 /** Abstraction that describes a model publication context. 386 * This structure is associated with struct bt_mesh_model_pub in mesh_access.h 387 */ 388 typedef struct { 389 /** Pointer to the model to which the context belongs. Initialized by the stack. */ 390 esp_ble_mesh_model_t *model; 391 392 uint16_t publish_addr; /*!< Publish Address. */ 393 uint16_t app_idx:12, /*!< Publish AppKey Index. */ 394 cred:1, /*!< Friendship Credentials Flag. */ 395 send_rel:1; /*!< Force reliable sending (segment acks) */ 396 397 uint8_t ttl; /*!< Publish Time to Live. */ 398 uint8_t retransmit; /*!< Retransmit Count & Interval Steps. */ 399 400 uint8_t period; /*!< Publish Period. */ 401 uint8_t period_div:4, /*!< Divisor for the Period. */ 402 fast_period:1, /*!< Use FastPeriodDivisor */ 403 count:3; /*!< Retransmissions left. */ 404 405 uint32_t period_start; /*!< Start of the current period. */ 406 407 /** @brief Publication buffer, containing the publication message. 408 * 409 * This will get correctly created when the publication context 410 * has been defined using the ESP_BLE_MESH_MODEL_PUB_DEFINE macro. 411 * 412 * ESP_BLE_MESH_MODEL_PUB_DEFINE(name, size); 413 */ 414 struct net_buf_simple *msg; 415 416 /** Callback used to update publish message. Initialized by the stack. */ 417 esp_ble_mesh_cb_t update; 418 419 /** Publish Period Timer. Initialized by the stack. */ 420 struct k_delayed_work timer; 421 422 /** Role of the device that is going to publish messages */ 423 uint8_t dev_role; 424 } esp_ble_mesh_model_pub_t; 425 426 /** @def ESP_BLE_MESH_MODEL_PUB_DEFINE 427 * 428 * Define a model publication context. 429 * 430 * @param _name Variable name given to the context. 431 * @param _msg_len Length of the publication message. 432 * @param _role Role of the device which contains the model. 433 */ 434 #define ESP_BLE_MESH_MODEL_PUB_DEFINE(_name, _msg_len, _role) \ 435 NET_BUF_SIMPLE_DEFINE_STATIC(bt_mesh_pub_msg_##_name, _msg_len); \ 436 static esp_ble_mesh_model_pub_t _name = { \ 437 .update = (uint32_t)NULL, \ 438 .msg = &bt_mesh_pub_msg_##_name, \ 439 .dev_role = _role, \ 440 } 441 442 /** @def ESP_BLE_MESH_MODEL_OP 443 * 444 * Define a model operation context. 445 * 446 * @param _opcode Message opcode. 447 * @param _min_len Message minimum length. 448 */ 449 #define ESP_BLE_MESH_MODEL_OP(_opcode, _min_len) \ 450 { \ 451 .opcode = _opcode, \ 452 .min_len = _min_len, \ 453 .param_cb = (uint32_t)NULL, \ 454 } 455 456 /** Abstraction that describes a model operation context. 457 * This structure is associated with struct bt_mesh_model_op in mesh_access.h 458 */ 459 typedef struct { 460 const uint32_t opcode; /*!< Message opcode */ 461 const size_t min_len; /*!< Message minimum length */ 462 esp_ble_mesh_cb_t param_cb; /*!< Callback used to handle message. Initialized by the stack. */ 463 } esp_ble_mesh_model_op_t; 464 465 /** Define the terminator for the model operation table. 466 * Each model operation struct array must use this terminator as 467 * the end tag of the operation unit. 468 */ 469 #define ESP_BLE_MESH_MODEL_OP_END {0, 0, 0} 470 471 /** Abstraction that describes a model callback structure. 472 * This structure is associated with struct bt_mesh_model_cb in mesh_access.h. 473 */ 474 typedef struct { 475 /** Callback used during model initialization. Initialized by the stack. */ 476 esp_ble_mesh_cb_t init_cb; 477 478 #if CONFIG_BLE_MESH_DEINIT 479 /** Callback used during model deinitialization. Initialized by the stack. */ 480 esp_ble_mesh_cb_t deinit_cb; 481 #endif /* CONFIG_BLE_MESH_DEINIT */ 482 } esp_ble_mesh_model_cbs_t; 483 484 /** Abstraction that describes a Mesh Model instance. 485 * This structure is associated with struct bt_mesh_model in mesh_access.h 486 */ 487 struct esp_ble_mesh_model { 488 /** Model ID */ 489 union { 490 const uint16_t model_id; /*!< 16-bit model identifier */ 491 struct { 492 uint16_t company_id; /*!< 16-bit company identifier */ 493 uint16_t model_id; /*!< 16-bit model identifier */ 494 } vnd; /*!< Structure encapsulating a model ID with a company ID */ 495 }; 496 497 /** Internal information, mainly for persistent storage */ 498 uint8_t element_idx; /*!< Belongs to Nth element */ 499 uint8_t model_idx; /*!< Is the Nth model in the element */ 500 uint16_t flags; /*!< Information about what has changed */ 501 502 /** The Element to which this Model belongs */ 503 esp_ble_mesh_elem_t *element; 504 505 /** Model Publication */ 506 esp_ble_mesh_model_pub_t *const pub; 507 508 /** AppKey List */ 509 uint16_t keys[CONFIG_BLE_MESH_MODEL_KEY_COUNT]; 510 511 /** Subscription List (group or virtual addresses) */ 512 uint16_t groups[CONFIG_BLE_MESH_MODEL_GROUP_COUNT]; 513 514 /** Model operation context */ 515 esp_ble_mesh_model_op_t *op; 516 517 /** Model callback structure */ 518 esp_ble_mesh_model_cbs_t *cb; 519 520 /** Model-specific user data */ 521 void *user_data; 522 }; 523 524 /** Helper to define an empty model array. 525 * This structure is associated with BLE_MESH_MODEL_NONE in mesh_access.h 526 */ 527 #define ESP_BLE_MESH_MODEL_NONE ((esp_ble_mesh_model_t []){}) 528 529 /** Message sending context. 530 * This structure is associated with struct bt_mesh_msg_ctx in mesh_access.h 531 */ 532 typedef struct { 533 /** NetKey Index of the subnet through which to send the message. */ 534 uint16_t net_idx; 535 536 /** AppKey Index for message encryption. */ 537 uint16_t app_idx; 538 539 /** Remote address. */ 540 uint16_t addr; 541 542 /** Destination address of a received message. Not used for sending. */ 543 uint16_t recv_dst; 544 545 /** RSSI of received packet. Not used for sending. */ 546 int8_t recv_rssi; 547 548 /** Received TTL value. Not used for sending. */ 549 uint8_t recv_ttl: 7; 550 551 /** Force sending reliably by using segment acknowledgement */ 552 uint8_t send_rel: 1; 553 554 /** TTL, or ESP_BLE_MESH_TTL_DEFAULT for default TTL. */ 555 uint8_t send_ttl; 556 557 /** Opcode of a received message. Not used for sending message. */ 558 uint32_t recv_op; 559 560 /** Model corresponding to the message, no need to be initialized before sending message */ 561 esp_ble_mesh_model_t *model; 562 563 /** Indicate if the message is sent by a node server model, no need to be initialized before sending message */ 564 bool srv_send; 565 } esp_ble_mesh_msg_ctx_t; 566 567 /** Provisioning properties & capabilities. 568 * This structure is associated with struct bt_mesh_prov in mesh_access.h 569 */ 570 typedef struct { 571 #if CONFIG_BLE_MESH_NODE 572 /** The UUID that is used when advertising as an unprovisioned device */ 573 const uint8_t *uuid; 574 575 /** Optional URI. This will be advertised separately from the 576 * unprovisioned beacon, however the unprovisioned beacon will 577 * contain a hash of it so the two can be associated by the 578 * provisioner. 579 */ 580 const char *uri; 581 582 /** Out of Band information field. */ 583 esp_ble_mesh_prov_oob_info_t oob_info; 584 585 /** Flag indicates whether unprovisioned devices support OOB public key */ 586 bool oob_pub_key; 587 588 /** Callback used to notify to set OOB Public Key. Initialized by the stack. */ 589 esp_ble_mesh_cb_t oob_pub_key_cb; 590 591 /** Static OOB value */ 592 const uint8_t *static_val; 593 /** Static OOB value length */ 594 uint8_t static_val_len; 595 596 /** Maximum size of Output OOB supported */ 597 uint8_t output_size; 598 /** Supported Output OOB Actions */ 599 uint16_t output_actions; 600 601 /** Maximum size of Input OOB supported */ 602 uint8_t input_size; 603 /** Supported Input OOB Actions */ 604 uint16_t input_actions; 605 606 /** Callback used to output the number. Initialized by the stack. */ 607 esp_ble_mesh_cb_t output_num_cb; 608 /** Callback used to output the string. Initialized by the stack. */ 609 esp_ble_mesh_cb_t output_str_cb; 610 /** Callback used to notify to input number/string. Initialized by the stack. */ 611 esp_ble_mesh_cb_t input_cb; 612 /** Callback used to indicate that link is opened. Initialized by the stack. */ 613 esp_ble_mesh_cb_t link_open_cb; 614 /** Callback used to indicate that link is closed. Initialized by the stack. */ 615 esp_ble_mesh_cb_t link_close_cb; 616 /** Callback used to indicate that provisioning is completed. Initialized by the stack. */ 617 esp_ble_mesh_cb_t complete_cb; 618 /** Callback used to indicate that node has been reset. Initialized by the stack. */ 619 esp_ble_mesh_cb_t reset_cb; 620 #endif /* CONFIG_BLE_MESH_NODE */ 621 622 #ifdef CONFIG_BLE_MESH_PROVISIONER 623 /** Provisioner device UUID */ 624 const uint8_t *prov_uuid; 625 626 /** Primary element address of the provisioner */ 627 const uint16_t prov_unicast_addr; 628 629 /** Pre-incremental unicast address value to be assigned to the first device */ 630 uint16_t prov_start_address; 631 632 /** Attention timer contained in Provisioning Invite PDU */ 633 uint8_t prov_attention; 634 635 /** Provisioning Algorithm for the Provisioner */ 636 uint8_t prov_algorithm; 637 638 /** Provisioner public key oob */ 639 uint8_t prov_pub_key_oob; 640 641 /** Callback used to notify to set device OOB Public Key. Initialized by the stack. */ 642 esp_ble_mesh_cb_t provisioner_prov_read_oob_pub_key; 643 644 /** Provisioner static oob value */ 645 uint8_t *prov_static_oob_val; 646 /** Provisioner static oob value length */ 647 uint8_t prov_static_oob_len; 648 649 /** Callback used to notify to input number/string. Initialized by the stack. */ 650 esp_ble_mesh_cb_t provisioner_prov_input; 651 /** Callback used to output number/string. Initialized by the stack. */ 652 esp_ble_mesh_cb_t provisioner_prov_output; 653 654 /** Key refresh and IV update flag */ 655 uint8_t flags; 656 657 /** IV index */ 658 uint32_t iv_index; 659 660 /** Callback used to indicate that link is opened. Initialized by the stack. */ 661 esp_ble_mesh_cb_t provisioner_link_open; 662 /** Callback used to indicate that link is closed. Initialized by the stack. */ 663 esp_ble_mesh_cb_t provisioner_link_close; 664 /** Callback used to indicate that a device is provisioned. Initialized by the stack. */ 665 esp_ble_mesh_cb_t provisioner_prov_comp; 666 #endif /* CONFIG_BLE_MESH_PROVISIONER */ 667 } esp_ble_mesh_prov_t; 668 669 /** Node Composition data context. 670 * This structure is associated with struct bt_mesh_comp in mesh_access.h 671 */ 672 typedef struct { 673 uint16_t cid; /*!< 16-bit SIG-assigned company identifier */ 674 uint16_t pid; /*!< 16-bit vendor-assigned product identifier */ 675 uint16_t vid; /*!< 16-bit vendor-assigned product version identifier */ 676 677 size_t element_count; /*!< Element count */ 678 esp_ble_mesh_elem_t *elements; /*!< A sequence of elements */ 679 } esp_ble_mesh_comp_t; 680 681 /*!< This enum value is the role of the device */ 682 typedef enum { 683 ROLE_NODE = 0, 684 ROLE_PROVISIONER, 685 ROLE_FAST_PROV, 686 } esp_ble_mesh_dev_role_t; 687 688 /*!< Flag which will be set when device is going to be added. */ 689 typedef uint8_t esp_ble_mesh_dev_add_flag_t; 690 #define ADD_DEV_RM_AFTER_PROV_FLAG BIT(0) /*!< Device will be removed from queue after provisioned successfully */ 691 #define ADD_DEV_START_PROV_NOW_FLAG BIT(1) /*!< Start provisioning device immediately */ 692 #define ADD_DEV_FLUSHABLE_DEV_FLAG BIT(2) /*!< Device can be remove when queue is full and new device is going to added */ 693 694 /** Information of the device which is going to be added for provisioning. */ 695 typedef struct { 696 esp_ble_mesh_bd_addr_t addr; /*!< Device address */ 697 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 698 uint8_t uuid[16]; /*!< Device UUID */ 699 uint16_t oob_info; /*!< Device OOB Info */ 700 /*!< ADD_DEV_START_PROV_NOW_FLAG shall not be set if the bearer has both PB-ADV and PB-GATT enabled */ 701 esp_ble_mesh_prov_bearer_t bearer; /*!< Provisioning Bearer */ 702 } esp_ble_mesh_unprov_dev_add_t; 703 704 #define DEL_DEV_ADDR_FLAG BIT(0) 705 #define DEL_DEV_UUID_FLAG BIT(1) 706 /** Information of the device which is going to be deleted. */ 707 typedef struct { 708 union { 709 struct { 710 esp_ble_mesh_bd_addr_t addr; /*!< Device address */ 711 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 712 }; 713 uint8_t uuid[16]; /*!< Device UUID */ 714 }; 715 uint8_t flag; /*!< BIT0: device address; BIT1: device UUID */ 716 } esp_ble_mesh_device_delete_t; 717 718 #define PROV_DATA_NET_IDX_FLAG BIT(0) 719 #define PROV_DATA_FLAGS_FLAG BIT(1) 720 #define PROV_DATA_IV_INDEX_FLAG BIT(2) 721 /** Information of the provisioner which is going to be updated. */ 722 typedef struct { 723 union { 724 uint16_t net_idx; /*!< NetKey Index */ 725 uint8_t flags; /*!< Flags */ 726 uint32_t iv_index; /*!< IV Index */ 727 }; 728 uint8_t flag; /*!< BIT0: net_idx; BIT1: flags; BIT2: iv_index */ 729 } esp_ble_mesh_prov_data_info_t; 730 731 /** Information of the provisioned node */ 732 typedef struct { 733 /* Device information */ 734 esp_ble_mesh_bd_addr_t addr; /*!< Node device address */ 735 esp_ble_mesh_addr_type_t addr_type; /*!< Node device address type */ 736 uint8_t dev_uuid[16]; /*!< Device UUID */ 737 uint16_t oob_info; /*!< Node OOB information */ 738 739 /* Provisioning information */ 740 uint16_t unicast_addr; /*!< Node unicast address */ 741 uint8_t element_num; /*!< Node element number */ 742 uint16_t net_idx; /*!< Node NetKey Index */ 743 uint8_t flags; /*!< Node key refresh flag and iv update flag */ 744 uint32_t iv_index; /*!< Node IV Index */ 745 uint8_t dev_key[16]; /*!< Node device key */ 746 747 /* Additional information */ 748 char name[ESP_BLE_MESH_NODE_NAME_MAX_LEN + 1]; /*!< Node name */ 749 uint16_t comp_length; /*!< Length of Composition Data */ 750 uint8_t *comp_data; /*!< Value of Composition Data */ 751 } __attribute__((packed)) esp_ble_mesh_node_t; 752 753 /** Context of fast provisioning which need to be set. */ 754 typedef struct { 755 uint16_t unicast_min; /*!< Minimum unicast address used for fast provisioning */ 756 uint16_t unicast_max; /*!< Maximum unicast address used for fast provisioning */ 757 uint16_t net_idx; /*!< Netkey index used for fast provisioning */ 758 uint8_t flags; /*!< Flags used for fast provisioning */ 759 uint32_t iv_index; /*!< IV Index used for fast provisioning */ 760 uint8_t offset; /*!< Offset of the UUID to be compared */ 761 uint8_t match_len; /*!< Length of the UUID to be compared */ 762 uint8_t match_val[16]; /*!< Value of UUID to be compared */ 763 } esp_ble_mesh_fast_prov_info_t; 764 765 /*!< This enum value is the action of fast provisioning */ 766 typedef enum { 767 FAST_PROV_ACT_NONE, 768 FAST_PROV_ACT_ENTER, 769 FAST_PROV_ACT_SUSPEND, 770 FAST_PROV_ACT_EXIT, 771 FAST_PROV_ACT_MAX, 772 } esp_ble_mesh_fast_prov_action_t; 773 774 /*!< This enum value is the type of proxy filter */ 775 typedef enum { 776 PROXY_FILTER_WHITELIST, 777 PROXY_FILTER_BLACKLIST, 778 } esp_ble_mesh_proxy_filter_type_t; 779 780 /*!< Provisioner heartbeat filter type */ 781 #define ESP_BLE_MESH_HEARTBEAT_FILTER_ACCEPTLIST 0x00 782 #define ESP_BLE_MESH_HEARTBEAT_FILTER_REJECTLIST 0x01 783 784 /*!< Provisioner heartbeat filter operation */ 785 #define ESP_BLE_MESH_HEARTBEAT_FILTER_ADD 0x00 786 #define ESP_BLE_MESH_HEARTBEAT_FILTER_REMOVE 0x01 787 788 /** Context of Provisioner heartbeat filter information to be set */ 789 typedef struct { 790 uint16_t hb_src; /*!< Heartbeat source address (unicast address) */ 791 uint16_t hb_dst; /*!< Heartbeat destination address (unicast address or group address) */ 792 } esp_ble_mesh_heartbeat_filter_info_t; 793 794 /*!< This enum value is the event of node/provisioner/fast provisioning */ 795 typedef enum { 796 ESP_BLE_MESH_PROV_REGISTER_COMP_EVT, /*!< Initialize BLE Mesh provisioning capabilities and internal data information completion event */ 797 ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT, /*!< Set the unprovisioned device name completion event */ 798 ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT, /*!< Enable node provisioning functionality completion event */ 799 ESP_BLE_MESH_NODE_PROV_DISABLE_COMP_EVT, /*!< Disable node provisioning functionality completion event */ 800 ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT, /*!< Establish a BLE Mesh link event */ 801 ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT, /*!< Close a BLE Mesh link event */ 802 ESP_BLE_MESH_NODE_PROV_OOB_PUB_KEY_EVT, /*!< Generate Node input OOB public key event */ 803 ESP_BLE_MESH_NODE_PROV_OUTPUT_NUMBER_EVT, /*!< Generate Node Output Number event */ 804 ESP_BLE_MESH_NODE_PROV_OUTPUT_STRING_EVT, /*!< Generate Node Output String event */ 805 ESP_BLE_MESH_NODE_PROV_INPUT_EVT, /*!< Event requiring the user to input a number or string */ 806 ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT, /*!< Provisioning done event */ 807 ESP_BLE_MESH_NODE_PROV_RESET_EVT, /*!< Provisioning reset event */ 808 ESP_BLE_MESH_NODE_PROV_SET_OOB_PUB_KEY_COMP_EVT, /*!< Node set oob public key completion event */ 809 ESP_BLE_MESH_NODE_PROV_INPUT_NUMBER_COMP_EVT, /*!< Node input number completion event */ 810 ESP_BLE_MESH_NODE_PROV_INPUT_STRING_COMP_EVT, /*!< Node input string completion event */ 811 ESP_BLE_MESH_NODE_PROXY_IDENTITY_ENABLE_COMP_EVT, /*!< Enable BLE Mesh Proxy Identity advertising completion event */ 812 ESP_BLE_MESH_NODE_PROXY_GATT_ENABLE_COMP_EVT, /*!< Enable BLE Mesh GATT Proxy Service completion event */ 813 ESP_BLE_MESH_NODE_PROXY_GATT_DISABLE_COMP_EVT, /*!< Disable BLE Mesh GATT Proxy Service completion event */ 814 ESP_BLE_MESH_NODE_ADD_LOCAL_NET_KEY_COMP_EVT, /*!< Node add NetKey locally completion event */ 815 ESP_BLE_MESH_NODE_ADD_LOCAL_APP_KEY_COMP_EVT, /*!< Node add AppKey locally completion event */ 816 ESP_BLE_MESH_NODE_BIND_APP_KEY_TO_MODEL_COMP_EVT, /*!< Node bind AppKey to model locally completion event */ 817 ESP_BLE_MESH_PROVISIONER_PROV_ENABLE_COMP_EVT, /*!< Provisioner enable provisioning functionality completion event */ 818 ESP_BLE_MESH_PROVISIONER_PROV_DISABLE_COMP_EVT, /*!< Provisioner disable provisioning functionality completion event */ 819 ESP_BLE_MESH_PROVISIONER_RECV_UNPROV_ADV_PKT_EVT, /*!< Provisioner receives unprovisioned device beacon event */ 820 ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_EVT, /*!< Provisioner read unprovisioned device OOB public key event */ 821 ESP_BLE_MESH_PROVISIONER_PROV_INPUT_EVT, /*!< Provisioner input value for provisioning procedure event */ 822 ESP_BLE_MESH_PROVISIONER_PROV_OUTPUT_EVT, /*!< Provisioner output value for provisioning procedure event */ 823 ESP_BLE_MESH_PROVISIONER_PROV_LINK_OPEN_EVT, /*!< Provisioner establish a BLE Mesh link event */ 824 ESP_BLE_MESH_PROVISIONER_PROV_LINK_CLOSE_EVT, /*!< Provisioner close a BLE Mesh link event */ 825 ESP_BLE_MESH_PROVISIONER_PROV_COMPLETE_EVT, /*!< Provisioner provisioning done event */ 826 ESP_BLE_MESH_PROVISIONER_ADD_UNPROV_DEV_COMP_EVT, /*!< Provisioner add a device to the list which contains devices that are waiting/going to be provisioned completion event */ 827 ESP_BLE_MESH_PROVISIONER_PROV_DEV_WITH_ADDR_COMP_EVT, /*!< Provisioner start to provision an unprovisioned device completion event */ 828 ESP_BLE_MESH_PROVISIONER_DELETE_DEV_COMP_EVT, /*!< Provisioner delete a device from the list, close provisioning link with the device completion event */ 829 ESP_BLE_MESH_PROVISIONER_SET_DEV_UUID_MATCH_COMP_EVT, /*!< Provisioner set the value to be compared with part of the unprovisioned device UUID completion event */ 830 ESP_BLE_MESH_PROVISIONER_SET_PROV_DATA_INFO_COMP_EVT, /*!< Provisioner set net_idx/flags/iv_index used for provisioning completion event */ 831 ESP_BLE_MESH_PROVISIONER_SET_STATIC_OOB_VALUE_COMP_EVT, /*!< Provisioner set static oob value used for provisioning completion event */ 832 ESP_BLE_MESH_PROVISIONER_SET_PRIMARY_ELEM_ADDR_COMP_EVT, /*!< Provisioner set unicast address of primary element completion event */ 833 ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_COMP_EVT, /*!< Provisioner read unprovisioned device OOB public key completion event */ 834 ESP_BLE_MESH_PROVISIONER_PROV_INPUT_NUMBER_COMP_EVT, /*!< Provisioner input number completion event */ 835 ESP_BLE_MESH_PROVISIONER_PROV_INPUT_STRING_COMP_EVT, /*!< Provisioner input string completion event */ 836 ESP_BLE_MESH_PROVISIONER_SET_NODE_NAME_COMP_EVT, /*!< Provisioner set node name completion event */ 837 ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_APP_KEY_COMP_EVT, /*!< Provisioner add local app key completion event */ 838 ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_APP_KEY_COMP_EVT, /*!< Provisioner update local app key completion event */ 839 ESP_BLE_MESH_PROVISIONER_BIND_APP_KEY_TO_MODEL_COMP_EVT, /*!< Provisioner bind local model with local app key completion event */ 840 ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_NET_KEY_COMP_EVT, /*!< Provisioner add local network key completion event */ 841 ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_NET_KEY_COMP_EVT, /*!< Provisioner update local network key completion event */ 842 ESP_BLE_MESH_PROVISIONER_STORE_NODE_COMP_DATA_COMP_EVT, /*!< Provisioner store node composition data completion event */ 843 ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_UUID_COMP_EVT, /*!< Provisioner delete node with uuid completion event */ 844 ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_ADDR_COMP_EVT, /*!< Provisioner delete node with unicast address completion event */ 845 ESP_BLE_MESH_PROVISIONER_ENABLE_HEARTBEAT_RECV_COMP_EVT, /*!< Provisioner start to receive heartbeat message completion event */ 846 ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_TYPE_COMP_EVT, /*!< Provisioner set the heartbeat filter type completion event */ 847 ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_INFO_COMP_EVT, /*!< Provisioner set the heartbeat filter information completion event */ 848 ESP_BLE_MESH_PROVISIONER_RECV_HEARTBEAT_MESSAGE_EVT, /*!< Provisioner receive heartbeat message event */ 849 ESP_BLE_MESH_PROVISIONER_DRIECT_ERASE_SETTINGS_COMP_EVT, /*!< Provisioner directly erase settings completion event */ 850 ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_INDEX_COMP_EVT, /*!< Provisioner open settings with index completion event */ 851 ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_UID_COMP_EVT, /*!< Provisioner open settings with user id completion event */ 852 ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_INDEX_COMP_EVT, /*!< Provisioner close settings with index completion event */ 853 ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_UID_COMP_EVT, /*!< Provisioner close settings with user id completion event */ 854 ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_INDEX_COMP_EVT, /*!< Provisioner delete settings with index completion event */ 855 ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_UID_COMP_EVT, /*!< Provisioner delete settings with user id completion event */ 856 ESP_BLE_MESH_SET_FAST_PROV_INFO_COMP_EVT, /*!< Set fast provisioning information (e.g. unicast address range, net_idx, etc.) completion event */ 857 ESP_BLE_MESH_SET_FAST_PROV_ACTION_COMP_EVT, /*!< Set fast provisioning action completion event */ 858 ESP_BLE_MESH_HEARTBEAT_MESSAGE_RECV_EVT, /*!< Receive Heartbeat message event */ 859 ESP_BLE_MESH_LPN_ENABLE_COMP_EVT, /*!< Enable Low Power Node completion event */ 860 ESP_BLE_MESH_LPN_DISABLE_COMP_EVT, /*!< Disable Low Power Node completion event */ 861 ESP_BLE_MESH_LPN_POLL_COMP_EVT, /*!< Low Power Node send Friend Poll completion event */ 862 ESP_BLE_MESH_LPN_FRIENDSHIP_ESTABLISH_EVT, /*!< Low Power Node establishes friendship event */ 863 ESP_BLE_MESH_LPN_FRIENDSHIP_TERMINATE_EVT, /*!< Low Power Node terminates friendship event */ 864 ESP_BLE_MESH_FRIEND_FRIENDSHIP_ESTABLISH_EVT, /*!< Friend Node establishes friendship event */ 865 ESP_BLE_MESH_FRIEND_FRIENDSHIP_TERMINATE_EVT, /*!< Friend Node terminates friendship event */ 866 ESP_BLE_MESH_PROXY_CLIENT_RECV_ADV_PKT_EVT, /*!< Proxy Client receives Network ID advertising packet event */ 867 ESP_BLE_MESH_PROXY_CLIENT_CONNECTED_EVT, /*!< Proxy Client establishes connection successfully event */ 868 ESP_BLE_MESH_PROXY_CLIENT_DISCONNECTED_EVT, /*!< Proxy Client terminates connection successfully event */ 869 ESP_BLE_MESH_PROXY_CLIENT_RECV_FILTER_STATUS_EVT, /*!< Proxy Client receives Proxy Filter Status event */ 870 ESP_BLE_MESH_PROXY_CLIENT_CONNECT_COMP_EVT, /*!< Proxy Client connect completion event */ 871 ESP_BLE_MESH_PROXY_CLIENT_DISCONNECT_COMP_EVT, /*!< Proxy Client disconnect completion event */ 872 ESP_BLE_MESH_PROXY_CLIENT_SET_FILTER_TYPE_COMP_EVT, /*!< Proxy Client set filter type completion event */ 873 ESP_BLE_MESH_PROXY_CLIENT_ADD_FILTER_ADDR_COMP_EVT, /*!< Proxy Client add filter address completion event */ 874 ESP_BLE_MESH_PROXY_CLIENT_REMOVE_FILTER_ADDR_COMP_EVT, /*!< Proxy Client remove filter address completion event */ 875 ESP_BLE_MESH_MODEL_SUBSCRIBE_GROUP_ADDR_COMP_EVT, /*!< Local model subscribes group address completion event */ 876 ESP_BLE_MESH_MODEL_UNSUBSCRIBE_GROUP_ADDR_COMP_EVT, /*!< Local model unsubscribes group address completion event */ 877 ESP_BLE_MESH_DEINIT_MESH_COMP_EVT, /*!< De-initialize BLE Mesh stack completion event */ 878 ESP_BLE_MESH_PROV_EVT_MAX, 879 } esp_ble_mesh_prov_cb_event_t; 880 881 /** 882 * @brief BLE Mesh Node/Provisioner callback parameters union 883 */ 884 typedef union { 885 /** 886 * @brief ESP_BLE_MESH_PROV_REGISTER_COMP_EVT 887 */ 888 struct ble_mesh_prov_register_comp_param { 889 int err_code; /*!< Indicate the result of BLE Mesh initialization */ 890 } prov_register_comp; /*!< Event parameter of ESP_BLE_MESH_PROV_REGISTER_COMP_EVT */ 891 /** 892 * @brief ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT 893 */ 894 struct ble_mesh_set_unprov_dev_name_comp_param { 895 int err_code; /*!< Indicate the result of setting BLE Mesh device name */ 896 } node_set_unprov_dev_name_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT */ 897 /** 898 * @brief ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT 899 */ 900 struct ble_mesh_prov_enable_comp_param { 901 int err_code; /*!< Indicate the result of enabling BLE Mesh device */ 902 } node_prov_enable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT */ 903 /** 904 * @brief ESP_BLE_MESH_NODE_PROV_DISABLE_COMP_EVT 905 */ 906 struct ble_mesh_prov_disable_comp_param { 907 int err_code; /*!< Indicate the result of disabling BLE Mesh device */ 908 } node_prov_disable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_DISABLE_COMP_EVT */ 909 /** 910 * @brief ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT 911 */ 912 struct ble_mesh_link_open_evt_param { 913 esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when device link is open */ 914 } node_prov_link_open; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT */ 915 /** 916 * @brief ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT 917 */ 918 struct ble_mesh_link_close_evt_param { 919 esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when device link is closed */ 920 } node_prov_link_close; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT */ 921 /** 922 * @brief ESP_BLE_MESH_NODE_PROV_OUTPUT_NUMBER_EVT 923 */ 924 struct ble_mesh_output_num_evt_param { 925 esp_ble_mesh_output_action_t action; /*!< Action of Output OOB Authentication */ 926 uint32_t number; /*!< Number of Output OOB Authentication */ 927 } node_prov_output_num; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_OUTPUT_NUMBER_EVT */ 928 /** 929 * @brief ESP_BLE_MESH_NODE_PROV_OUTPUT_STRING_EVT 930 */ 931 struct ble_mesh_output_str_evt_param { 932 char string[8]; /*!< String of Output OOB Authentication */ 933 } node_prov_output_str; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_OUTPUT_STRING_EVT */ 934 /** 935 * @brief ESP_BLE_MESH_NODE_PROV_INPUT_EVT 936 */ 937 struct ble_mesh_input_evt_param { 938 esp_ble_mesh_input_action_t action; /*!< Action of Input OOB Authentication */ 939 uint8_t size; /*!< Size of Input OOB Authentication */ 940 } node_prov_input; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_INPUT_EVT */ 941 /** 942 * @brief ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT 943 */ 944 struct ble_mesh_provision_complete_evt_param { 945 uint16_t net_idx; /*!< NetKey Index */ 946 uint8_t net_key[16]; /*!< NetKey */ 947 uint16_t addr; /*!< Primary address */ 948 uint8_t flags; /*!< Flags */ 949 uint32_t iv_index; /*!< IV Index */ 950 } node_prov_complete; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT */ 951 /** 952 * @brief ESP_BLE_MESH_NODE_PROV_RESET_EVT 953 */ 954 struct ble_mesh_provision_reset_param { 955 956 } node_prov_reset; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_RESET_EVT */ 957 /** 958 * @brief ESP_BLE_MESH_NODE_PROV_SET_OOB_PUB_KEY_COMP_EVT 959 */ 960 struct ble_mesh_set_oob_pub_key_comp_param { 961 int err_code; /*!< Indicate the result of setting OOB Public Key */ 962 } node_prov_set_oob_pub_key_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_SET_OOB_PUB_KEY_COMP_EVT */ 963 /** 964 * @brief ESP_BLE_MESH_NODE_PROV_INPUT_NUM_COMP_EVT 965 */ 966 struct ble_mesh_input_number_comp_param { 967 int err_code; /*!< Indicate the result of inputting number */ 968 } node_prov_input_num_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_INPUT_NUM_COMP_EVT */ 969 /** 970 * @brief ESP_BLE_MESH_NODE_PROV_INPUT_STR_COMP_EVT 971 */ 972 struct ble_mesh_input_string_comp_param { 973 int err_code; /*!< Indicate the result of inputting string */ 974 } node_prov_input_str_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_INPUT_STR_COMP_EVT */ 975 /** 976 * @brief ESP_BLE_MESH_NODE_PROXY_IDENTITY_ENABLE_COMP_EVT 977 */ 978 struct ble_mesh_proxy_identity_enable_comp_param { 979 int err_code; /*!< Indicate the result of enabling Mesh Proxy advertising */ 980 } node_proxy_identity_enable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROXY_IDENTITY_ENABLE_COMP_EVT */ 981 /** 982 * @brief ESP_BLE_MESH_NODE_PROXY_GATT_ENABLE_COMP_EVT 983 */ 984 struct ble_mesh_proxy_gatt_enable_comp_param { 985 int err_code; /*!< Indicate the result of enabling Mesh Proxy Service */ 986 } node_proxy_gatt_enable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROXY_GATT_ENABLE_COMP_EVT */ 987 /** 988 * @brief ESP_BLE_MESH_NODE_PROXY_GATT_DISABLE_COMP_EVT 989 */ 990 struct ble_mesh_proxy_gatt_disable_comp_param { 991 int err_code; /*!< Indicate the result of disabling Mesh Proxy Service */ 992 } node_proxy_gatt_disable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROXY_GATT_DISABLE_COMP_EVT */ 993 /** 994 * @brief ESP_BLE_MESH_NODE_ADD_LOCAL_NET_KEY_COMP_EVT 995 */ 996 struct ble_mesh_node_add_local_net_key_comp_param { 997 int err_code; /*!< Indicate the result of adding local NetKey by the node */ 998 uint16_t net_idx; /*!< NetKey Index */ 999 } node_add_net_key_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_ADD_LOCAL_NET_KEY_COMP_EVT */ 1000 /** 1001 * @brief ESP_BLE_MESH_NODE_ADD_LOCAL_APP_KEY_COMP_EVT 1002 */ 1003 struct ble_mesh_node_add_local_app_key_comp_param { 1004 int err_code; /*!< Indicate the result of adding local AppKey by the node */ 1005 uint16_t net_idx; /*!< NetKey Index */ 1006 uint16_t app_idx; /*!< AppKey Index */ 1007 } node_add_app_key_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_ADD_LOCAL_APP_KEY_COMP_EVT */ 1008 /** 1009 * @brief ESP_BLE_MESH_NODE_BIND_APP_KEY_TO_MODEL_COMP_EVT 1010 */ 1011 struct ble_mesh_node_bind_local_mod_app_comp_param { 1012 int err_code; /*!< Indicate the result of binding AppKey with model by the node */ 1013 uint16_t element_addr; /*!< Element address */ 1014 uint16_t app_idx; /*!< AppKey Index */ 1015 uint16_t company_id; /*!< Company ID */ 1016 uint16_t model_id; /*!< Model ID */ 1017 } node_bind_app_key_to_model_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_BIND_APP_KEY_TO_MODEL_COMP_EVT */ 1018 /** 1019 * @brief ESP_BLE_MESH_PROVISIONER_RECV_UNPROV_ADV_PKT_EVT 1020 */ 1021 struct ble_mesh_provisioner_recv_unprov_adv_pkt_param { 1022 uint8_t dev_uuid[16]; /*!< Device UUID of the unprovisioned device */ 1023 esp_ble_mesh_bd_addr_t addr; /*!< Device address of the unprovisioned device */ 1024 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1025 uint16_t oob_info; /*!< OOB Info of the unprovisioned device */ 1026 uint8_t adv_type; /*!< Avertising type of the unprovisioned device */ 1027 esp_ble_mesh_prov_bearer_t bearer; /*!< Bearer of the unprovisioned device */ 1028 int8_t rssi; /*!< RSSI of the received advertising packet */ 1029 } provisioner_recv_unprov_adv_pkt; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_RECV_UNPROV_ADV_PKT_EVT */ 1030 /** 1031 * @brief ESP_BLE_MESH_PROVISIONER_PROV_ENABLE_COMP_EVT 1032 */ 1033 struct ble_mesh_provisioner_prov_enable_comp_param { 1034 int err_code; /*!< Indicate the result of enabling BLE Mesh Provisioner */ 1035 } provisioner_prov_enable_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_ENABLE_COMP_EVT */ 1036 /** 1037 * @brief ESP_BLE_MESH_PROVISIONER_PROV_DISABLE_COMP_EVT 1038 */ 1039 struct ble_mesh_provisioner_prov_disable_comp_param { 1040 int err_code; /*!< Indicate the result of disabling BLE Mesh Provisioner */ 1041 } provisioner_prov_disable_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_DISABLE_COMP_EVT */ 1042 /** 1043 * @brief ESP_BLE_MESH_PROVISIONER_PROV_LINK_OPEN_EVT 1044 */ 1045 struct ble_mesh_provisioner_link_open_evt_param { 1046 esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when Provisioner link is opened */ 1047 } provisioner_prov_link_open; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_LINK_OPEN_EVT */ 1048 /** 1049 * @brief ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_EVT 1050 */ 1051 struct ble_mesh_provisioner_prov_read_oob_pub_key_evt_param { 1052 uint8_t link_idx; /*!< Index of the provisioning link */ 1053 } provisioner_prov_read_oob_pub_key; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_EVT */ 1054 /** 1055 * @brief ESP_BLE_MESH_PROVISIONER_PROV_INPUT_EVT 1056 */ 1057 struct ble_mesh_provisioner_prov_input_evt_param { 1058 esp_ble_mesh_oob_method_t method; /*!< Method of device Output OOB Authentication */ 1059 esp_ble_mesh_output_action_t action; /*!< Action of device Output OOB Authentication */ 1060 uint8_t size; /*!< Size of device Output OOB Authentication */ 1061 uint8_t link_idx; /*!< Index of the provisioning link */ 1062 } provisioner_prov_input; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_INPUT_EVT */ 1063 /** 1064 * @brief ESP_BLE_MESH_PROVISIONER_PROV_OUTPUT_EVT 1065 */ 1066 struct ble_mesh_provisioner_prov_output_evt_param { 1067 esp_ble_mesh_oob_method_t method; /*!< Method of device Input OOB Authentication */ 1068 esp_ble_mesh_input_action_t action; /*!< Action of device Input OOB Authentication */ 1069 uint8_t size; /*!< Size of device Input OOB Authentication */ 1070 uint8_t link_idx; /*!< Index of the provisioning link */ 1071 union { 1072 char string[8]; /*!< String output by the Provisioner */ 1073 uint32_t number; /*!< Number output by the Provisioner */ 1074 }; 1075 } provisioner_prov_output; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_OUTPUT_EVT */ 1076 /** 1077 * @brief ESP_BLE_MESH_PROVISIONER_PROV_LINK_CLOSE_EVT 1078 */ 1079 struct ble_mesh_provisioner_link_close_evt_param { 1080 esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when Provisioner link is closed */ 1081 uint8_t reason; /*!< Reason of the closed provisioning link */ 1082 } provisioner_prov_link_close; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_LINK_CLOSE_EVT */ 1083 /** 1084 * @brief ESP_BLE_MESH_PROVISIONER_PROV_COMPLETE_EVT 1085 */ 1086 struct ble_mesh_provisioner_prov_comp_param { 1087 uint16_t node_idx; /*!< Index of the provisioned device */ 1088 esp_ble_mesh_octet16_t device_uuid; /*!< Device UUID of the provisioned device */ 1089 uint16_t unicast_addr; /*!< Primary address of the provisioned device */ 1090 uint8_t element_num; /*!< Element count of the provisioned device */ 1091 uint16_t netkey_idx; /*!< NetKey Index of the provisioned device */ 1092 } provisioner_prov_complete; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_COMPLETE_EVT */ 1093 /** 1094 * @brief ESP_BLE_MESH_PROVISIONER_ADD_UNPROV_DEV_COMP_EVT 1095 */ 1096 struct ble_mesh_provisioner_add_unprov_dev_comp_param { 1097 int err_code; /*!< Indicate the result of adding device into queue by the Provisioner */ 1098 } provisioner_add_unprov_dev_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_ADD_UNPROV_DEV_COMP_EVT */ 1099 /** 1100 * @brief ESP_BLE_MESH_PROVISIONER_PROV_DEV_WITH_ADDR_COMP_EVT 1101 */ 1102 struct ble_mesh_provisioner_prov_dev_with_addr_comp_param { 1103 int err_code; /*!< Indicate the result of Provisioner starting to provision a device */ 1104 } provisioner_prov_dev_with_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_DEV_WITH_ADDR_COMP_EVT */ 1105 /** 1106 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_DEV_COMP_EVT 1107 */ 1108 struct ble_mesh_provisioner_delete_dev_comp_param { 1109 int err_code; /*!< Indicate the result of deleting device by the Provisioner */ 1110 } provisioner_delete_dev_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_DEV_COMP_EVT */ 1111 /** 1112 * @brief ESP_BLE_MESH_PROVISIONER_SET_DEV_UUID_MATCH_COMP_EVT 1113 */ 1114 struct ble_mesh_provisioner_set_dev_uuid_match_comp_param { 1115 int err_code; /*!< Indicate the result of setting Device UUID match value by the Provisioner */ 1116 } provisioner_set_dev_uuid_match_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_DEV_UUID_MATCH_COMP_EVT */ 1117 /** 1118 * @brief ESP_BLE_MESH_PROVISIONER_SET_PROV_DATA_INFO_COMP_EVT 1119 */ 1120 struct ble_mesh_provisioner_set_prov_data_info_comp_param { 1121 int err_code; /*!< Indicate the result of setting provisioning info by the Provisioner */ 1122 } provisioner_set_prov_data_info_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_PROV_DATA_INFO_COMP_EVT */ 1123 /** 1124 * @brief ESP_BLE_MESH_PROVISIONER_SET_STATIC_OOB_VALUE_COMP_EVT 1125 */ 1126 struct ble_mesh_provisioner_set_static_oob_val_comp_param { 1127 int err_code; /*!< Indicate the result of setting static oob value by the Provisioner */ 1128 } provisioner_set_static_oob_val_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_STATIC_OOB_VALUE_COMP_EVT */ 1129 /** 1130 * @brief ESP_BLE_MESH_PROVISIONER_SET_PRIMARY_ELEM_ADDR_COMP_EVT 1131 */ 1132 struct ble_mesh_provisioner_set_primary_elem_addr_comp_param { 1133 int err_code; /*!< Indicate the result of setting unicast address of primary element by the Provisioner */ 1134 } provisioner_set_primary_elem_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_PRIMARY_ELEM_ADDR_COMP_EVT */ 1135 /** 1136 * @brief ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_COMP_EVT 1137 */ 1138 struct ble_mesh_provisioner_prov_read_oob_pub_key_comp_param { 1139 int err_code; /*!< Indicate the result of setting OOB Public Key by the Provisioner */ 1140 } provisioner_prov_read_oob_pub_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_COMP_EVT */ 1141 /** 1142 * @brief ESP_BLE_MESH_PROVISIONER_PROV_INPUT_NUMBER_COMP_EVT 1143 */ 1144 struct ble_mesh_provisioner_prov_input_num_comp_param { 1145 int err_code; /*!< Indicate the result of inputting number by the Provisioner */ 1146 } provisioner_prov_input_num_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_INPUT_NUMBER_COMP_EVT */ 1147 /** 1148 * @brief ESP_BLE_MESH_PROVISIONER_PROV_INPUT_STRING_COMP_EVT 1149 */ 1150 struct ble_mesh_provisioner_prov_input_str_comp_param { 1151 int err_code; /*!< Indicate the result of inputting string by the Provisioner */ 1152 } provisioner_prov_input_str_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_INPUT_STRING_COMP_EVT */ 1153 /** 1154 * @brief ESP_BLE_MESH_PROVISIONER_SET_NODE_NAME_COMP_EVT 1155 */ 1156 struct ble_mesh_provisioner_set_node_name_comp_param { 1157 int err_code; /*!< Indicate the result of setting provisioned device name by the Provisioner */ 1158 uint16_t node_index; /*!< Index of the provisioned device */ 1159 } provisioner_set_node_name_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_NODE_NAME_COMP_EVT */ 1160 /** 1161 * @brief ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_APP_KEY_COMP_EVT 1162 */ 1163 struct ble_mesh_provisioner_add_local_app_key_comp_param { 1164 int err_code; /*!< Indicate the result of adding local AppKey by the Provisioner */ 1165 uint16_t net_idx; /*!< NetKey Index */ 1166 uint16_t app_idx; /*!< AppKey Index */ 1167 } provisioner_add_app_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_APP_KEY_COMP_EVT */ 1168 /** 1169 * @brief ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_APP_KEY_COMP_EVT 1170 */ 1171 struct ble_mesh_provisioner_update_local_app_key_comp_param { 1172 int err_code; /*!< Indicate the result of updating local AppKey by the Provisioner */ 1173 uint16_t net_idx; /*!< NetKey Index */ 1174 uint16_t app_idx; /*!< AppKey Index */ 1175 } provisioner_update_app_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_APP_KEY_COMP_EVT */ 1176 /** 1177 * @brief ESP_BLE_MESH_PROVISIONER_BIND_APP_KEY_TO_MODEL_COMP_EVT 1178 */ 1179 struct ble_mesh_provisioner_bind_local_mod_app_comp_param { 1180 int err_code; /*!< Indicate the result of binding AppKey with model by the Provisioner */ 1181 uint16_t element_addr; /*!< Element address */ 1182 uint16_t app_idx; /*!< AppKey Index */ 1183 uint16_t company_id; /*!< Company ID */ 1184 uint16_t model_id; /*!< Model ID */ 1185 } provisioner_bind_app_key_to_model_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_BIND_APP_KEY_TO_MODEL_COMP_EVT */ 1186 /** 1187 * @brief ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_NET_KEY_COMP_EVT 1188 */ 1189 struct ble_mesh_provisioner_add_local_net_key_comp_param { 1190 int err_code; /*!< Indicate the result of adding local NetKey by the Provisioner */ 1191 uint16_t net_idx; /*!< NetKey Index */ 1192 } provisioner_add_net_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_NET_KEY_COMP_EVT */ 1193 /** 1194 * @brief ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_NET_KEY_COMP_EVT 1195 */ 1196 struct ble_mesh_provisioner_update_local_net_key_comp_param { 1197 int err_code; /*!< Indicate the result of updating local NetKey by the Provisioner */ 1198 uint16_t net_idx; /*!< NetKey Index */ 1199 } provisioner_update_net_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_NET_KEY_COMP_EVT */ 1200 /** 1201 * @brief ESP_BLE_MESH_PROVISIONER_STORE_NODE_COMP_DATA_COMP_EVT 1202 */ 1203 struct ble_mesh_provisioner_store_node_comp_data_comp_param { 1204 int err_code; /*!< Indicate the result of storing node composition data by the Provisioner */ 1205 uint16_t addr; /*!< Node element address */ 1206 } provisioner_store_node_comp_data_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_STORE_NODE_COMP_DATA_COMP_EVT */ 1207 /** 1208 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_UUID_COMP_EVT 1209 */ 1210 struct ble_mesh_provisioner_delete_node_with_uuid_comp_param { 1211 int err_code; /*!< Indicate the result of deleting node with uuid by the Provisioner */ 1212 uint8_t uuid[16]; /*!< Node device uuid */ 1213 } provisioner_delete_node_with_uuid_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_UUID_COMP_EVT */ 1214 /** 1215 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_ADDR_COMP_EVT 1216 */ 1217 struct ble_mesh_provisioner_delete_node_with_addr_comp_param { 1218 int err_code; /*!< Indicate the result of deleting node with unicast address by the Provisioner */ 1219 uint16_t unicast_addr; /*!< Node unicast address */ 1220 } provisioner_delete_node_with_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_ADDR_COMP_EVT */ 1221 /** 1222 * @brief ESP_BLE_MESH_PROVISIONER_ENABLE_HEARTBEAT_RECV_COMP_EVT 1223 */ 1224 struct { 1225 int err_code; /*!< Indicate the result of enabling/disabling to receive heartbeat messages by the Provisioner */ 1226 bool enable; /*!< Indicate enabling or disabling receiving heartbeat messages */ 1227 } provisioner_enable_heartbeat_recv_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_ENABLE_HEARTBEAT_RECV_COMP_EVT */ 1228 /** 1229 * @brief ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_TYPE_COMP_EVT 1230 */ 1231 struct { 1232 int err_code; /*!< Indicate the result of setting the heartbeat filter type by the Provisioner */ 1233 uint8_t type; /*!< Type of the filter used for receiving heartbeat messages */ 1234 } provisioner_set_heartbeat_filter_type_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_TYPE_COMP_EVT */ 1235 /** 1236 * @brief ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_INFO_COMP_EVT 1237 */ 1238 struct { 1239 int err_code; /*!< Indicate the result of setting the heartbeat filter address by the Provisioner */ 1240 uint8_t op; /*!< Operation (add, remove, clean) */ 1241 uint16_t hb_src; /*!< Heartbeat source address */ 1242 uint16_t hb_dst; /*!< Heartbeat destination address */ 1243 } provisioner_set_heartbeat_filter_info_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_INFO_COMP_EVT */ 1244 /** 1245 * @brief ESP_BLE_MESH_PROVISIONER_RECV_HEARTBEAT_MESSAGE_EVT 1246 */ 1247 struct { 1248 uint16_t hb_src; /*!< Heartbeat source address */ 1249 uint16_t hb_dst; /*!< Heartbeat destination address */ 1250 uint8_t init_ttl; /*!< Heartbeat InitTTL */ 1251 uint8_t rx_ttl; /*!< Heartbeat RxTTL */ 1252 uint8_t hops; /*!< Heartbeat hops (InitTTL - RxTTL + 1) */ 1253 uint16_t feature; /*!< Bit field of currently active features of the node */ 1254 int8_t rssi; /*!< RSSI of the heartbeat message */ 1255 } provisioner_recv_heartbeat; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_RECV_HEARTBEAT_MESSAGE_EVT */ 1256 /** 1257 * @brief ESP_BLE_MESH_PROVISIONER_DRIECT_ERASE_SETTINGS_COMP_EVT 1258 */ 1259 struct { 1260 int err_code; /*!< Indicate the result of directly erasing settings by the Provisioner */ 1261 } provisioner_direct_erase_settings_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_DRIECT_ERASE_SETTINGS_COMP_EVT */ 1262 /** 1263 * @brief ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_INDEX_COMP_EVT 1264 */ 1265 struct { 1266 int err_code; /*!< Indicate the result of opening settings with index by the Provisioner */ 1267 uint8_t index; /*!< Index of Provisioner settings */ 1268 } provisioner_open_settings_with_index_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_INDEX_COMP_EVT */ 1269 /** 1270 * @brief ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_UID_COMP_EVT 1271 */ 1272 struct { 1273 int err_code; /*!< Indicate the result of opening settings with user id by the Provisioner */ 1274 uint8_t index; /*!< Index of Provisioner settings */ 1275 char uid[ESP_BLE_MESH_SETTINGS_UID_SIZE + 1]; /*!< Provisioner settings user id */ 1276 } provisioner_open_settings_with_uid_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_UID_COMP_EVT */ 1277 /** 1278 * @brief ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_INDEX_COMP_EVT 1279 */ 1280 struct { 1281 int err_code; /*!< Indicate the result of closing settings with index by the Provisioner */ 1282 uint8_t index; /*!< Index of Provisioner settings */ 1283 } provisioner_close_settings_with_index_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_INDEX_COMP_EVT */ 1284 /** 1285 * @brief ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_UID_COMP_EVT 1286 */ 1287 struct { 1288 int err_code; /*!< Indicate the result of closing settings with user id by the Provisioner */ 1289 uint8_t index; /*!< Index of Provisioner settings */ 1290 char uid[ESP_BLE_MESH_SETTINGS_UID_SIZE + 1]; /*!< Provisioner settings user id */ 1291 } provisioner_close_settings_with_uid_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_UID_COMP_EVT */ 1292 /** 1293 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_INDEX_COMP_EVT 1294 */ 1295 struct { 1296 int err_code; /*!< Indicate the result of deleting settings with index by the Provisioner */ 1297 uint8_t index; /*!< Index of Provisioner settings */ 1298 } provisioner_delete_settings_with_index_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_INDEX_COMP_EVT */ 1299 /** 1300 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_UID_COMP_EVT 1301 */ 1302 struct { 1303 int err_code; /*!< Indicate the result of deleting settings with user id by the Provisioner */ 1304 uint8_t index; /*!< Index of Provisioner settings */ 1305 char uid[ESP_BLE_MESH_SETTINGS_UID_SIZE + 1]; /*!< Provisioner settings user id */ 1306 } provisioner_delete_settings_with_uid_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_UID_COMP_EVT */ 1307 /** 1308 * @brief ESP_BLE_MESH_SET_FAST_PROV_INFO_COMP_EVT 1309 */ 1310 struct ble_mesh_set_fast_prov_info_comp_param { 1311 uint8_t status_unicast; /*!< Indicate the result of setting unicast address range of fast provisioning */ 1312 uint8_t status_net_idx; /*!< Indicate the result of setting NetKey Index of fast provisioning */ 1313 uint8_t status_match; /*!< Indicate the result of setting matching Device UUID of fast provisioning */ 1314 } set_fast_prov_info_comp; /*!< Event parameter of ESP_BLE_MESH_SET_FAST_PROV_INFO_COMP_EVT */ 1315 /** 1316 * @brief ESP_BLE_MESH_SET_FAST_PROV_ACTION_COMP_EVT 1317 */ 1318 struct ble_mesh_set_fast_prov_action_comp_param { 1319 uint8_t status_action; /*!< Indicate the result of setting action of fast provisioning */ 1320 } set_fast_prov_action_comp; /*!< Event parameter of ESP_BLE_MESH_SET_FAST_PROV_ACTION_COMP_EVT */ 1321 /** 1322 * @brief ESP_BLE_MESH_HEARTBEAT_MESSAGE_RECV_EVT 1323 */ 1324 struct ble_mesh_heartbeat_msg_recv_param { 1325 uint8_t hops; /*!< Heartbeat hops (InitTTL - RxTTL + 1) */ 1326 uint16_t feature; /*!< Bit field of currently active features of the node */ 1327 } heartbeat_msg_recv; /*!< Event parameter of ESP_BLE_MESH_HEARTBEAT_MESSAGE_RECV_EVT */ 1328 /** 1329 * @brief ESP_BLE_MESH_LPN_ENABLE_COMP_EVT 1330 */ 1331 struct ble_mesh_lpn_enable_comp_param { 1332 int err_code; /*!< Indicate the result of enabling LPN functionality */ 1333 } lpn_enable_comp; /*!< Event parameter of ESP_BLE_MESH_LPN_ENABLE_COMP_EVT */ 1334 /** 1335 * @brief ESP_BLE_MESH_LPN_DISABLE_COMP_EVT 1336 */ 1337 struct ble_mesh_lpn_disable_comp_param { 1338 int err_code; /*!< Indicate the result of disabling LPN functionality */ 1339 } lpn_disable_comp; /*!< Event parameter of ESP_BLE_MESH_LPN_DISABLE_COMP_EVT */ 1340 /** 1341 * @brief ESP_BLE_MESH_LPN_POLL_COMP_EVT 1342 */ 1343 struct ble_mesh_lpn_poll_comp_param { 1344 int err_code; /*!< Indicate the result of sending Friend Poll */ 1345 } lpn_poll_comp; /*!< Event parameter of ESP_BLE_MESH_LPN_POLL_COMP_EVT */ 1346 /** 1347 * @brief ESP_BLE_MESH_LPN_FRIENDSHIP_ESTABLISH_EVT 1348 */ 1349 struct ble_mesh_lpn_friendship_establish_param { 1350 uint16_t friend_addr; /*!< Friend Node unicast address */ 1351 } lpn_friendship_establish; /*!< Event parameter of ESP_BLE_MESH_LPN_FRIENDSHIP_ESTABLISH_EVT */ 1352 /** 1353 * @brief ESP_BLE_MESH_LPN_FRIENDSHIP_TERMINATE_EVT 1354 */ 1355 struct ble_mesh_lpn_friendship_terminate_param { 1356 uint16_t friend_addr; /*!< Friend Node unicast address */ 1357 } lpn_friendship_terminate; /*!< Event parameter of ESP_BLE_MESH_LPN_FRIENDSHIP_TERMINATE_EVT */ 1358 /** 1359 * @brief ESP_BLE_MESH_FRIEND_FRIENDSHIP_ESTABLISH_EVT 1360 */ 1361 struct ble_mesh_friend_friendship_establish_param { 1362 uint16_t lpn_addr; /*!< Low Power Node unicast address */ 1363 } frnd_friendship_establish; /*!< Event parameter of ESP_BLE_MESH_FRIEND_FRIENDSHIP_ESTABLISH_EVT */ 1364 /** 1365 * @brief ESP_BLE_MESH_FRIEND_FRIENDSHIP_TERMINATE_EVT 1366 */ 1367 struct ble_mesh_friend_friendship_terminate_param { 1368 uint16_t lpn_addr; /*!< Low Power Node unicast address */ 1369 /** This enum value is the reason of friendship termination on the friend node side */ 1370 enum { 1371 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_ESTABLISH_FAIL, /*!< Friend Offer has been sent, but Friend Offer is not received within 1 second, friendship fails to be established */ 1372 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_POLL_TIMEOUT, /*!< Friendship is established, PollTimeout timer expires and no Friend Poll/Sub Add/Sub Remove is received */ 1373 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_RECV_FRND_REQ, /*!< Receive Friend Request from existing Low Power Node */ 1374 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_RECV_FRND_CLEAR, /*!< Receive Friend Clear from other friend node */ 1375 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_DISABLE, /*!< Friend feature disabled or corresponding NetKey is deleted */ 1376 } reason; /*!< Friendship terminated reason */ 1377 } frnd_friendship_terminate; /*!< Event parameter of ESP_BLE_MESH_FRIEND_FRIENDSHIP_TERMINATE_EVT */ 1378 /** 1379 * @brief ESP_BLE_MESH_PROXY_CLIENT_RECV_ADV_PKT_EVT 1380 */ 1381 struct ble_mesh_proxy_client_recv_adv_pkt_param { 1382 esp_ble_mesh_bd_addr_t addr; /*!< Device address */ 1383 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1384 uint16_t net_idx; /*!< Network ID related NetKey Index */ 1385 uint8_t net_id[8]; /*!< Network ID contained in the advertising packet */ 1386 int8_t rssi; /*!< RSSI of the received advertising packet */ 1387 } proxy_client_recv_adv_pkt; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_RECV_ADV_PKT_EVT */ 1388 /** 1389 * @brief ESP_BLE_MESH_PROXY_CLIENT_CONNECTED_EVT 1390 */ 1391 struct ble_mesh_proxy_client_connected_param { 1392 esp_ble_mesh_bd_addr_t addr; /*!< Device address of the Proxy Server */ 1393 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1394 uint8_t conn_handle; /*!< Proxy connection handle */ 1395 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1396 } proxy_client_connected; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_CONNECTED_EVT */ 1397 /** 1398 * @brief ESP_BLE_MESH_PROXY_CLIENT_DISCONNECTED_EVT 1399 */ 1400 struct ble_mesh_proxy_client_disconnected_param { 1401 esp_ble_mesh_bd_addr_t addr; /*!< Device address of the Proxy Server */ 1402 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1403 uint8_t conn_handle; /*!< Proxy connection handle */ 1404 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1405 uint8_t reason; /*!< Proxy disconnect reason */ 1406 } proxy_client_disconnected; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_DISCONNECTED_EVT */ 1407 /** 1408 * @brief ESP_BLE_MESH_PROXY_CLIENT_RECV_FILTER_STATUS_EVT 1409 */ 1410 struct ble_mesh_proxy_client_recv_filter_status_param { 1411 uint8_t conn_handle; /*!< Proxy connection handle */ 1412 uint16_t server_addr; /*!< Proxy Server primary element address */ 1413 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1414 uint8_t filter_type; /*!< Proxy Server filter type(whitelist or blacklist) */ 1415 uint16_t list_size; /*!< Number of addresses in the Proxy Server filter list */ 1416 } proxy_client_recv_filter_status; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_RECV_FILTER_STATUS_EVT */ 1417 /** 1418 * @brief ESP_BLE_MESH_PROXY_CLIENT_CONNECT_COMP_EVT 1419 */ 1420 struct ble_mesh_proxy_client_connect_comp_param { 1421 int err_code; /*!< Indicate the result of Proxy Client connect */ 1422 esp_ble_mesh_bd_addr_t addr; /*!< Device address of the Proxy Server */ 1423 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1424 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1425 } proxy_client_connect_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_CONNECT_COMP_EVT */ 1426 /** 1427 * @brief ESP_BLE_MESH_PROXY_CLIENT_DISCONNECT_COMP_EVT 1428 */ 1429 struct ble_mesh_proxy_client_disconnect_comp_param { 1430 int err_code; /*!< Indicate the result of Proxy Client disconnect */ 1431 uint8_t conn_handle; /*!< Proxy connection handle */ 1432 } proxy_client_disconnect_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_DISCONNECT_COMP_EVT */ 1433 /** 1434 * @brief ESP_BLE_MESH_PROXY_CLIENT_SET_FILTER_TYPE_COMP_EVT 1435 */ 1436 struct ble_mesh_proxy_client_set_filter_type_comp_param { 1437 int err_code; /*!< Indicate the result of Proxy Client set filter type */ 1438 uint8_t conn_handle; /*!< Proxy connection handle */ 1439 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1440 } proxy_client_set_filter_type_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_SET_FILTER_TYPE_COMP_EVT */ 1441 /** 1442 * @brief ESP_BLE_MESH_PROXY_CLIENT_ADD_FILTER_ADDR_COMP_EVT 1443 */ 1444 struct ble_mesh_proxy_client_add_filter_addr_comp_param { 1445 int err_code; /*!< Indicate the result of Proxy Client add filter address */ 1446 uint8_t conn_handle; /*!< Proxy connection handle */ 1447 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1448 } proxy_client_add_filter_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_ADD_FILTER_ADDR_COMP_EVT */ 1449 /** 1450 * @brief ESP_BLE_MESH_PROXY_CLIENT_REMOVE_FILTER_ADDR_COMP_EVT 1451 */ 1452 struct ble_mesh_proxy_client_remove_filter_addr_comp_param { 1453 int err_code; /*!< Indicate the result of Proxy Client remove filter address */ 1454 uint8_t conn_handle; /*!< Proxy connection handle */ 1455 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1456 } proxy_client_remove_filter_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_REMOVE_FILTER_ADDR_COMP_EVT */ 1457 /** 1458 * @brief ESP_BLE_MESH_MODEL_SUBSCRIBE_GROUP_ADDR_COMP_EVT 1459 */ 1460 struct ble_mesh_model_sub_group_addr_comp_param { 1461 int err_code; /*!< Indicate the result of local model subscribing group address */ 1462 uint16_t element_addr; /*!< Element address */ 1463 uint16_t company_id; /*!< Company ID */ 1464 uint16_t model_id; /*!< Model ID */ 1465 uint16_t group_addr; /*!< Group Address */ 1466 } model_sub_group_addr_comp; /*!< Event parameters of ESP_BLE_MESH_MODEL_SUBSCRIBE_GROUP_ADDR_COMP_EVT */ 1467 /** 1468 * @brief ESP_BLE_MESH_MODEL_UNSUBSCRIBE_GROUP_ADDR_COMP_EVT 1469 */ 1470 struct ble_mesh_model_unsub_group_addr_comp_param { 1471 int err_code; /*!< Indicate the result of local model unsubscribing group address */ 1472 uint16_t element_addr; /*!< Element address */ 1473 uint16_t company_id; /*!< Company ID */ 1474 uint16_t model_id; /*!< Model ID */ 1475 uint16_t group_addr; /*!< Group Address */ 1476 } model_unsub_group_addr_comp; /*!< Event parameters of ESP_BLE_MESH_MODEL_UNSUBSCRIBE_GROUP_ADDR_COMP_EVT */ 1477 /** 1478 * @brief ESP_BLE_MESH_DEINIT_MESH_COMP_EVT 1479 */ 1480 struct ble_mesh_deinit_mesh_comp_param { 1481 int err_code; /*!< Indicate the result of BLE Mesh deinitialization */ 1482 } deinit_mesh_comp; /*!< Event parameter of ESP_BLE_MESH_DEINIT_MESH_COMP_EVT */ 1483 } esp_ble_mesh_prov_cb_param_t; 1484 1485 /** 1486 * @brief BLE Mesh models related Model ID and Opcode definitions 1487 */ 1488 1489 /*!< Foundation Models */ 1490 #define ESP_BLE_MESH_MODEL_ID_CONFIG_SRV 0x0000 1491 #define ESP_BLE_MESH_MODEL_ID_CONFIG_CLI 0x0001 1492 #define ESP_BLE_MESH_MODEL_ID_HEALTH_SRV 0x0002 1493 #define ESP_BLE_MESH_MODEL_ID_HEALTH_CLI 0x0003 1494 1495 /*!< Models from the Mesh Model Specification */ 1496 #define ESP_BLE_MESH_MODEL_ID_GEN_ONOFF_SRV 0x1000 1497 #define ESP_BLE_MESH_MODEL_ID_GEN_ONOFF_CLI 0x1001 1498 #define ESP_BLE_MESH_MODEL_ID_GEN_LEVEL_SRV 0x1002 1499 #define ESP_BLE_MESH_MODEL_ID_GEN_LEVEL_CLI 0x1003 1500 #define ESP_BLE_MESH_MODEL_ID_GEN_DEF_TRANS_TIME_SRV 0x1004 1501 #define ESP_BLE_MESH_MODEL_ID_GEN_DEF_TRANS_TIME_CLI 0x1005 1502 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_ONOFF_SRV 0x1006 1503 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_ONOFF_SETUP_SRV 0x1007 1504 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_ONOFF_CLI 0x1008 1505 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_LEVEL_SRV 0x1009 1506 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_LEVEL_SETUP_SRV 0x100a 1507 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_LEVEL_CLI 0x100b 1508 #define ESP_BLE_MESH_MODEL_ID_GEN_BATTERY_SRV 0x100c 1509 #define ESP_BLE_MESH_MODEL_ID_GEN_BATTERY_CLI 0x100d 1510 #define ESP_BLE_MESH_MODEL_ID_GEN_LOCATION_SRV 0x100e 1511 #define ESP_BLE_MESH_MODEL_ID_GEN_LOCATION_SETUP_SRV 0x100f 1512 #define ESP_BLE_MESH_MODEL_ID_GEN_LOCATION_CLI 0x1010 1513 #define ESP_BLE_MESH_MODEL_ID_GEN_ADMIN_PROP_SRV 0x1011 1514 #define ESP_BLE_MESH_MODEL_ID_GEN_MANUFACTURER_PROP_SRV 0x1012 1515 #define ESP_BLE_MESH_MODEL_ID_GEN_USER_PROP_SRV 0x1013 1516 #define ESP_BLE_MESH_MODEL_ID_GEN_CLIENT_PROP_SRV 0x1014 1517 #define ESP_BLE_MESH_MODEL_ID_GEN_PROP_CLI 0x1015 1518 #define ESP_BLE_MESH_MODEL_ID_SENSOR_SRV 0x1100 1519 #define ESP_BLE_MESH_MODEL_ID_SENSOR_SETUP_SRV 0x1101 1520 #define ESP_BLE_MESH_MODEL_ID_SENSOR_CLI 0x1102 1521 #define ESP_BLE_MESH_MODEL_ID_TIME_SRV 0x1200 1522 #define ESP_BLE_MESH_MODEL_ID_TIME_SETUP_SRV 0x1201 1523 #define ESP_BLE_MESH_MODEL_ID_TIME_CLI 0x1202 1524 #define ESP_BLE_MESH_MODEL_ID_SCENE_SRV 0x1203 1525 #define ESP_BLE_MESH_MODEL_ID_SCENE_SETUP_SRV 0x1204 1526 #define ESP_BLE_MESH_MODEL_ID_SCENE_CLI 0x1205 1527 #define ESP_BLE_MESH_MODEL_ID_SCHEDULER_SRV 0x1206 1528 #define ESP_BLE_MESH_MODEL_ID_SCHEDULER_SETUP_SRV 0x1207 1529 #define ESP_BLE_MESH_MODEL_ID_SCHEDULER_CLI 0x1208 1530 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LIGHTNESS_SRV 0x1300 1531 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LIGHTNESS_SETUP_SRV 0x1301 1532 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LIGHTNESS_CLI 0x1302 1533 #define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_SRV 0x1303 1534 #define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_SETUP_SRV 0x1304 1535 #define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_CLI 0x1305 1536 #define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_TEMP_SRV 0x1306 1537 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_SRV 0x1307 1538 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_SETUP_SRV 0x1308 1539 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_CLI 0x1309 1540 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_HUE_SRV 0x130a 1541 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_SAT_SRV 0x130b 1542 #define ESP_BLE_MESH_MODEL_ID_LIGHT_XYL_SRV 0x130c 1543 #define ESP_BLE_MESH_MODEL_ID_LIGHT_XYL_SETUP_SRV 0x130d 1544 #define ESP_BLE_MESH_MODEL_ID_LIGHT_XYL_CLI 0x130e 1545 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LC_SRV 0x130f 1546 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LC_SETUP_SRV 0x1310 1547 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LC_CLI 0x1311 1548 1549 /** 1550 * esp_ble_mesh_opcode_config_client_get_t belongs to esp_ble_mesh_opcode_t, this typedef is only 1551 * used to locate the opcodes used by esp_ble_mesh_config_client_get_state. 1552 * The following opcodes will only be used in the esp_ble_mesh_config_client_get_state function. 1553 */ 1554 typedef uint32_t esp_ble_mesh_opcode_config_client_get_t; 1555 1556 #define ESP_BLE_MESH_MODEL_OP_BEACON_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x09) /*!< Config Beacon Get */ 1557 #define ESP_BLE_MESH_MODEL_OP_COMPOSITION_DATA_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x08) /*!< Config Composition Data Get */ 1558 #define ESP_BLE_MESH_MODEL_OP_DEFAULT_TTL_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0C) /*!< Config Default TTL Get */ 1559 #define ESP_BLE_MESH_MODEL_OP_GATT_PROXY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x12) /*!< Config GATT Proxy Get */ 1560 #define ESP_BLE_MESH_MODEL_OP_RELAY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x26) /*!< Config Relay Get */ 1561 #define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x18) /*!< Config Model Publication Get */ 1562 #define ESP_BLE_MESH_MODEL_OP_FRIEND_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0F) /*!< Config Friend Get */ 1563 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_PUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x38) /*!< Config Heartbeat Publication Get */ 1564 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_SUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3a) /*!< Config Heartbeat Subscription Get */ 1565 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x42) /*!< Config NetKey Get */ 1566 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x01) /*!< Config AppKey Get */ 1567 #define ESP_BLE_MESH_MODEL_OP_NODE_IDENTITY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x46) /*!< Config Node Identity Get */ 1568 #define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_SUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x29) /*!< Config SIG Model Subscription Get */ 1569 #define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_SUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2B) /*!< Config Vendor Model Subscription Get */ 1570 #define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_APP_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4B) /*!< Config SIG Model App Get */ 1571 #define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_APP_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4D) /*!< Config Vendor Model App Get */ 1572 #define ESP_BLE_MESH_MODEL_OP_KEY_REFRESH_PHASE_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x15) /*!< Config Key Refresh Phase Get */ 1573 #define ESP_BLE_MESH_MODEL_OP_LPN_POLLTIMEOUT_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2D) /*!< Config Low Power Node PollTimeout Get */ 1574 #define ESP_BLE_MESH_MODEL_OP_NETWORK_TRANSMIT_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x23) /*!< Config Network Transmit Get */ 1575 1576 /** 1577 * esp_ble_mesh_opcode_config_client_set_t belongs to esp_ble_mesh_opcode_t, this typedef is 1578 * only used to locate the opcodes used by esp_ble_mesh_config_client_set_state. 1579 * The following opcodes will only be used in the esp_ble_mesh_config_client_set_state function. 1580 */ 1581 typedef uint32_t esp_ble_mesh_opcode_config_client_set_t; 1582 1583 #define ESP_BLE_MESH_MODEL_OP_BEACON_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0A) /*!< Config Beacon Set */ 1584 #define ESP_BLE_MESH_MODEL_OP_DEFAULT_TTL_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0D) /*!< Config Default TTL Set */ 1585 #define ESP_BLE_MESH_MODEL_OP_GATT_PROXY_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x13) /*!< Config GATT Proxy Set */ 1586 #define ESP_BLE_MESH_MODEL_OP_RELAY_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x27) /*!< Config Relay Set */ 1587 #define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_SET ESP_BLE_MESH_MODEL_OP_1(0x03) /*!< Config Model Publication Set */ 1588 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_ADD ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1B) /*!< Config Model Subscription Add */ 1589 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_VIRTUAL_ADDR_ADD ESP_BLE_MESH_MODEL_OP_2(0x80, 0x20) /*!< Config Model Subscription Virtual Address Add */ 1590 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1C) /*!< Config Model Subscription Delete */ 1591 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_VIRTUAL_ADDR_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x21) /*!< Config Model Subscription Virtual Address Delete */ 1592 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_OVERWRITE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1E) /*!< Config Model Subscription Overwrite */ 1593 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_VIRTUAL_ADDR_OVERWRITE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x22) /*!< Config Model Subscription Virtual Address Overwrite */ 1594 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_ADD ESP_BLE_MESH_MODEL_OP_2(0x80, 0x40) /*!< Config NetKey Add */ 1595 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_ADD ESP_BLE_MESH_MODEL_OP_1(0x00) /*!< Config AppKey Add */ 1596 #define ESP_BLE_MESH_MODEL_OP_MODEL_APP_BIND ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3D) /*!< Config Model App Bind */ 1597 #define ESP_BLE_MESH_MODEL_OP_NODE_RESET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x49) /*!< Config Node Reset */ 1598 #define ESP_BLE_MESH_MODEL_OP_FRIEND_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x10) /*!< Config Friend Set */ 1599 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_PUB_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x39) /*!< Config Heartbeat Publication Set */ 1600 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_SUB_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3B) /*!< Config Heartbeat Subscription Set */ 1601 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_UPDATE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x45) /*!< Config NetKey Update */ 1602 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x41) /*!< Config NetKey Delete */ 1603 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_UPDATE ESP_BLE_MESH_MODEL_OP_1(0x01) /*!< Config AppKey Update */ 1604 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x00) /*!< Config AppKey Delete */ 1605 #define ESP_BLE_MESH_MODEL_OP_NODE_IDENTITY_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x47) /*!< Config Node Identity Set */ 1606 #define ESP_BLE_MESH_MODEL_OP_KEY_REFRESH_PHASE_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x16) /*!< Config Key Refresh Phase Set */ 1607 #define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_VIRTUAL_ADDR_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1A) /*!< Config Model Publication Virtual Address Set */ 1608 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_DELETE_ALL ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1D) /*!< Config Model Subscription Delete All */ 1609 #define ESP_BLE_MESH_MODEL_OP_MODEL_APP_UNBIND ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3F) /*!< Config Model App Unbind */ 1610 #define ESP_BLE_MESH_MODEL_OP_NETWORK_TRANSMIT_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x24) /*!< Config Network Transmit Set */ 1611 1612 /** 1613 * esp_ble_mesh_opcode_config_status_t belongs to esp_ble_mesh_opcode_t, this typedef is only 1614 * used to locate the opcodes used by the Config Model messages 1615 * The following opcodes are used by the BLE Mesh Config Server Model internally to respond 1616 * to the Config Client Model's request messages. 1617 */ 1618 typedef uint32_t esp_ble_mesh_opcode_config_status_t; 1619 1620 #define ESP_BLE_MESH_MODEL_OP_BEACON_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0B) 1621 #define ESP_BLE_MESH_MODEL_OP_COMPOSITION_DATA_STATUS ESP_BLE_MESH_MODEL_OP_1(0x02) 1622 #define ESP_BLE_MESH_MODEL_OP_DEFAULT_TTL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0E) 1623 #define ESP_BLE_MESH_MODEL_OP_GATT_PROXY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x14) 1624 #define ESP_BLE_MESH_MODEL_OP_RELAY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x28) 1625 #define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x19) 1626 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1F) 1627 #define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_SUB_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2A) 1628 #define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_SUB_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2C) 1629 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x44) 1630 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x43) 1631 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x03) 1632 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x02) 1633 #define ESP_BLE_MESH_MODEL_OP_NODE_IDENTITY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x48) 1634 #define ESP_BLE_MESH_MODEL_OP_MODEL_APP_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3E) 1635 #define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_APP_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4C) 1636 #define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_APP_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4E) 1637 #define ESP_BLE_MESH_MODEL_OP_NODE_RESET_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4A) 1638 #define ESP_BLE_MESH_MODEL_OP_FRIEND_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x11) 1639 #define ESP_BLE_MESH_MODEL_OP_KEY_REFRESH_PHASE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x17) 1640 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_PUB_STATUS ESP_BLE_MESH_MODEL_OP_1(0x06) 1641 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_SUB_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3C) 1642 #define ESP_BLE_MESH_MODEL_OP_LPN_POLLTIMEOUT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2E) 1643 #define ESP_BLE_MESH_MODEL_OP_NETWORK_TRANSMIT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x25) 1644 1645 /** 1646 * This typedef is only used to indicate the status code contained in some of 1647 * the Configuration Server Model status message. 1648 */ 1649 typedef uint8_t esp_ble_mesh_cfg_status_t; 1650 1651 #define ESP_BLE_MESH_CFG_STATUS_SUCCESS 0x00 1652 #define ESP_BLE_MESH_CFG_STATUS_INVALID_ADDRESS 0x01 1653 #define ESP_BLE_MESH_CFG_STATUS_INVALID_MODEL 0x02 1654 #define ESP_BLE_MESH_CFG_STATUS_INVALID_APPKEY 0x03 1655 #define ESP_BLE_MESH_CFG_STATUS_INVALID_NETKEY 0x04 1656 #define ESP_BLE_MESH_CFG_STATUS_INSUFFICIENT_RESOURCES 0x05 1657 #define ESP_BLE_MESH_CFG_STATUS_KEY_INDEX_ALREADY_STORED 0x06 1658 #define ESP_BLE_MESH_CFG_STATUS_INVALID_PUBLISH_PARAMETERS 0x07 1659 #define ESP_BLE_MESH_CFG_STATUS_NOT_A_SUBSCRIBE_MODEL 0x08 1660 #define ESP_BLE_MESH_CFG_STATUS_STORAGE_FAILURE 0x09 1661 #define ESP_BLE_MESH_CFG_STATUS_FEATURE_NOT_SUPPORTED 0x0A 1662 #define ESP_BLE_MESH_CFG_STATUS_CANNOT_UPDATE 0x0B 1663 #define ESP_BLE_MESH_CFG_STATUS_CANNOT_REMOVE 0x0C 1664 #define ESP_BLE_MESH_CFG_STATUS_CANNOT_BIND 0x0D 1665 #define ESP_BLE_MESH_CFG_STATUS_TEMP_UNABLE_TO_CHANGE_STATE 0x0E 1666 #define ESP_BLE_MESH_CFG_STATUS_CANNOT_SET 0x0F 1667 #define ESP_BLE_MESH_CFG_STATUS_UNSPECIFIED_ERROR 0x10 1668 #define ESP_BLE_MESH_CFG_STATUS_INVALID_BINDING 0x11 1669 1670 /** 1671 * esp_ble_mesh_opcode_health_client_get_t belongs to esp_ble_mesh_opcode_t, this typedef is 1672 * only used to locate the opcodes used by esp_ble_mesh_health_client_get_state. 1673 * The following opcodes will only be used in the esp_ble_mesh_health_client_get_state function. 1674 */ 1675 typedef uint32_t esp_ble_mesh_opcode_health_client_get_t; 1676 1677 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x31) /*!< Health Fault Get */ 1678 #define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x34) /*!< Health Period Get */ 1679 #define ESP_BLE_MESH_MODEL_OP_ATTENTION_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x04) /*!< Health Attention Get */ 1680 1681 /** 1682 * esp_ble_mesh_opcode_health_client_set_t belongs to esp_ble_mesh_opcode_t, this typedef is 1683 * only used to locate the opcodes used by esp_ble_mesh_health_client_set_state. 1684 * The following opcodes will only be used in the esp_ble_mesh_health_client_set_state function. 1685 */ 1686 typedef uint32_t esp_ble_mesh_opcode_health_client_set_t; 1687 1688 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_CLEAR ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2F) /*!< Health Fault Clear */ 1689 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_CLEAR_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x30) /*!< Health Fault Clear Unacknowledged */ 1690 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_TEST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x32) /*!< Health Fault Test */ 1691 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_TEST_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x33) /*!< Health Fault Test Unacknowledged */ 1692 #define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x35) /*!< Health Period Set */ 1693 #define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x36) /*!< Health Period Set Unacknowledged */ 1694 #define ESP_BLE_MESH_MODEL_OP_ATTENTION_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x05) /*!< Health Attention Set */ 1695 #define ESP_BLE_MESH_MODEL_OP_ATTENTION_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x06) /*!< Health Attention Set Unacknowledged */ 1696 1697 /** 1698 * esp_ble_mesh_health_model_status_t belongs to esp_ble_mesh_opcode_t, this typedef is 1699 * only used to locate the opcodes used by the Health Model messages. 1700 * The following opcodes are used by the BLE Mesh Health Server Model internally to 1701 * respond to the Health Client Model's request messages. 1702 */ 1703 typedef uint32_t esp_ble_mesh_health_model_status_t; 1704 1705 #define ESP_BLE_MESH_MODEL_OP_HEALTH_CURRENT_STATUS ESP_BLE_MESH_MODEL_OP_1(0x04) 1706 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_STATUS ESP_BLE_MESH_MODEL_OP_1(0x05) 1707 #define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x37) 1708 #define ESP_BLE_MESH_MODEL_OP_ATTENTION_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x07) 1709 1710 /** 1711 * esp_ble_mesh_generic_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is 1712 * only used to locate the opcodes used by functions esp_ble_mesh_generic_client_get_state 1713 * & esp_ble_mesh_generic_client_set_state. 1714 */ 1715 typedef uint32_t esp_ble_mesh_generic_message_opcode_t; 1716 1717 /*!< Generic OnOff Message Opcode */ 1718 #define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x01) 1719 #define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x02) 1720 #define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x03) 1721 #define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x04) 1722 1723 /*!< Generic Level Message Opcode */ 1724 #define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x05) 1725 #define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x06) 1726 #define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x07) 1727 #define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x08) 1728 #define ESP_BLE_MESH_MODEL_OP_GEN_DELTA_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x09) 1729 #define ESP_BLE_MESH_MODEL_OP_GEN_DELTA_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0A) 1730 #define ESP_BLE_MESH_MODEL_OP_GEN_MOVE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0B) 1731 #define ESP_BLE_MESH_MODEL_OP_GEN_MOVE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0C) 1732 1733 /*!< Generic Default Transition Time Message Opcode */ 1734 #define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0D) 1735 #define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0E) 1736 #define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0F) 1737 #define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x10) 1738 1739 /*!< Generic Power OnOff Message Opcode */ 1740 #define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x11) 1741 #define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x12) 1742 1743 /*!< Generic Power OnOff Setup Message Opcode */ 1744 #define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x13) 1745 #define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x14) 1746 1747 /*!< Generic Power Level Message Opcode */ 1748 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x15) 1749 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x16) 1750 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x17) 1751 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x18) 1752 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LAST_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x19) 1753 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LAST_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1A) 1754 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1B) 1755 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1C) 1756 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1D) 1757 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1E) 1758 1759 /*!< Generic Power Level Setup Message Opcode */ 1760 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1F) 1761 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x20) 1762 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x21) 1763 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x22) 1764 1765 /*!< Generic Battery Message Opcode */ 1766 #define ESP_BLE_MESH_MODEL_OP_GEN_BATTERY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x23) 1767 #define ESP_BLE_MESH_MODEL_OP_GEN_BATTERY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x24) 1768 1769 /*!< Generic Location Message Opcode */ 1770 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x25) 1771 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_STATUS ESP_BLE_MESH_MODEL_OP_1(0x40) 1772 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x26) 1773 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x27) 1774 1775 /*!< Generic Location Setup Message Opcode */ 1776 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_SET ESP_BLE_MESH_MODEL_OP_1(0x41) 1777 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x42) 1778 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x28) 1779 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x29) 1780 1781 /*!< Generic Manufacturer Property Message Opcode */ 1782 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2A) 1783 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x43) 1784 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2B) 1785 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x44) 1786 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x45) 1787 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x46) 1788 1789 /*!< Generic Admin Property Message Opcode */ 1790 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2C) 1791 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x47) 1792 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2D) 1793 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x48) 1794 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x49) 1795 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x4A) 1796 1797 /*!< Generic User Property Message Opcode */ 1798 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2E) 1799 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x4B) 1800 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2F) 1801 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x4C) 1802 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x4D) 1803 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x4E) 1804 1805 /*!< Generic Client Property Message Opcode */ 1806 #define ESP_BLE_MESH_MODEL_OP_GEN_CLIENT_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_1(0x4F) 1807 #define ESP_BLE_MESH_MODEL_OP_GEN_CLIENT_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x50) 1808 1809 /** 1810 * esp_ble_mesh_sensor_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is 1811 * only used to locate the opcodes used by functions esp_ble_mesh_sensor_client_get_state 1812 * & esp_ble_mesh_sensor_client_set_state. 1813 */ 1814 typedef uint32_t esp_ble_mesh_sensor_message_opcode_t; 1815 1816 /*!< Sensor Message Opcode */ 1817 #define ESP_BLE_MESH_MODEL_OP_SENSOR_DESCRIPTOR_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x30) 1818 #define ESP_BLE_MESH_MODEL_OP_SENSOR_DESCRIPTOR_STATUS ESP_BLE_MESH_MODEL_OP_1(0x51) 1819 #define ESP_BLE_MESH_MODEL_OP_SENSOR_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x31) 1820 #define ESP_BLE_MESH_MODEL_OP_SENSOR_STATUS ESP_BLE_MESH_MODEL_OP_1(0x52) 1821 #define ESP_BLE_MESH_MODEL_OP_SENSOR_COLUMN_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x32) 1822 #define ESP_BLE_MESH_MODEL_OP_SENSOR_COLUMN_STATUS ESP_BLE_MESH_MODEL_OP_1(0x53) 1823 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SERIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x33) 1824 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SERIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x54) 1825 1826 /*!< Sensor Setup Message Opcode */ 1827 #define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x34) 1828 #define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_SET ESP_BLE_MESH_MODEL_OP_1(0x55) 1829 #define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x56) 1830 #define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_STATUS ESP_BLE_MESH_MODEL_OP_1(0x57) 1831 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTINGS_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x35) 1832 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTINGS_STATUS ESP_BLE_MESH_MODEL_OP_1(0x58) 1833 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x36) 1834 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_SET ESP_BLE_MESH_MODEL_OP_1(0x59) 1835 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x5A) 1836 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5B) 1837 1838 /** 1839 * esp_ble_mesh_time_scene_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is 1840 * only used to locate the opcodes used by functions esp_ble_mesh_time_scene_client_get_state 1841 * & esp_ble_mesh_time_scene_client_set_state. 1842 */ 1843 typedef uint32_t esp_ble_mesh_time_scene_message_opcode_t; 1844 1845 /*!< Time Message Opcode */ 1846 #define ESP_BLE_MESH_MODEL_OP_TIME_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x37) 1847 #define ESP_BLE_MESH_MODEL_OP_TIME_SET ESP_BLE_MESH_MODEL_OP_1(0x5C) 1848 #define ESP_BLE_MESH_MODEL_OP_TIME_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5D) 1849 #define ESP_BLE_MESH_MODEL_OP_TIME_ROLE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x38) 1850 #define ESP_BLE_MESH_MODEL_OP_TIME_ROLE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x39) 1851 #define ESP_BLE_MESH_MODEL_OP_TIME_ROLE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3A) 1852 #define ESP_BLE_MESH_MODEL_OP_TIME_ZONE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3B) 1853 #define ESP_BLE_MESH_MODEL_OP_TIME_ZONE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3C) 1854 #define ESP_BLE_MESH_MODEL_OP_TIME_ZONE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3D) 1855 #define ESP_BLE_MESH_MODEL_OP_TAI_UTC_DELTA_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3E) 1856 #define ESP_BLE_MESH_MODEL_OP_TAI_UTC_DELTA_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3F) 1857 #define ESP_BLE_MESH_MODEL_OP_TAI_UTC_DELTA_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x40) 1858 1859 /*!< Scene Message Opcode */ 1860 #define ESP_BLE_MESH_MODEL_OP_SCENE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x41) 1861 #define ESP_BLE_MESH_MODEL_OP_SCENE_RECALL ESP_BLE_MESH_MODEL_OP_2(0x82, 0x42) 1862 #define ESP_BLE_MESH_MODEL_OP_SCENE_RECALL_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x43) 1863 #define ESP_BLE_MESH_MODEL_OP_SCENE_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5E) 1864 #define ESP_BLE_MESH_MODEL_OP_SCENE_REGISTER_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x44) 1865 #define ESP_BLE_MESH_MODEL_OP_SCENE_REGISTER_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x45) 1866 1867 /*!< Scene Setup Message Opcode */ 1868 #define ESP_BLE_MESH_MODEL_OP_SCENE_STORE ESP_BLE_MESH_MODEL_OP_2(0x82, 0x46) 1869 #define ESP_BLE_MESH_MODEL_OP_SCENE_STORE_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x47) 1870 #define ESP_BLE_MESH_MODEL_OP_SCENE_DELETE ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9E) 1871 #define ESP_BLE_MESH_MODEL_OP_SCENE_DELETE_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9F) 1872 1873 /*!< Scheduler Message Opcode */ 1874 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x48) 1875 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5F) 1876 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x49) 1877 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4A) 1878 1879 /*!< Scheduler Setup Message Opcode */ 1880 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_SET ESP_BLE_MESH_MODEL_OP_1(0x60) 1881 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x61) 1882 1883 /** 1884 * esp_ble_mesh_light_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is 1885 * only used to locate the opcodes used by functions esp_ble_mesh_light_client_get_state 1886 * & esp_ble_mesh_light_client_set_state. 1887 */ 1888 typedef uint32_t esp_ble_mesh_light_message_opcode_t; 1889 1890 /*!< Light Lightness Message Opcode */ 1891 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4B) 1892 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4C) 1893 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4D) 1894 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4E) 1895 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4F) 1896 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x50) 1897 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x51) 1898 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x52) 1899 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LAST_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x53) 1900 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LAST_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x54) 1901 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x55) 1902 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x56) 1903 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x57) 1904 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x58) 1905 1906 /*!< Light Lightness Setup Message Opcode */ 1907 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x59) 1908 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5A) 1909 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5B) 1910 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5C) 1911 1912 /*!< Light CTL Message Opcode */ 1913 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5D) 1914 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5E) 1915 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5F) 1916 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x60) 1917 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x61) 1918 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x62) 1919 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x63) 1920 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x64) 1921 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x65) 1922 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x66) 1923 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x67) 1924 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x68) 1925 1926 /*!< Light CTL Setup Message Opcode */ 1927 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x69) 1928 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6A) 1929 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6B) 1930 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6C) 1931 1932 /*!< Light HSL Message Opcode */ 1933 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6D) 1934 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6E) 1935 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6F) 1936 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x70) 1937 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x71) 1938 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x72) 1939 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x73) 1940 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x74) 1941 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x75) 1942 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x76) 1943 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x77) 1944 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x78) 1945 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_TARGET_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x79) 1946 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_TARGET_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7A) 1947 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7B) 1948 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7C) 1949 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7D) 1950 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7E) 1951 1952 /*!< Light HSL Setup Message Opcode */ 1953 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7F) 1954 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x80) 1955 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x81) 1956 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x82) 1957 1958 /*!< Light xyL Message Opcode */ 1959 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x83) 1960 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x84) 1961 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x85) 1962 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x86) 1963 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_TARGET_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x87) 1964 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_TARGET_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x88) 1965 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x89) 1966 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8A) 1967 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8B) 1968 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8C) 1969 1970 /*!< Light xyL Setup Message Opcode */ 1971 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8D) 1972 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8E) 1973 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8F) 1974 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x90) 1975 1976 /*!< Light Control Message Opcode */ 1977 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x91) 1978 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x92) 1979 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x93) 1980 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x94) 1981 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x95) 1982 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x96) 1983 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x97) 1984 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x98) 1985 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x99) 1986 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9A) 1987 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9B) 1988 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9C) 1989 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9D) 1990 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x62) 1991 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x63) 1992 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x64) 1993 1994 typedef uint32_t esp_ble_mesh_opcode_t; 1995 /*!< End of defines of esp_ble_mesh_opcode_t */ 1996 1997 /** 1998 * This typedef is only used to indicate the status code contained in some of the 1999 * server models (e.g. Generic Server Model) status message. 2000 */ 2001 typedef uint8_t esp_ble_mesh_model_status_t; 2002 2003 #define ESP_BLE_MESH_MODEL_STATUS_SUCCESS 0x00 2004 #define ESP_BLE_MESH_MODEL_STATUS_CANNOT_SET_RANGE_MIN 0x01 2005 #define ESP_BLE_MESH_MODEL_STATUS_CANNOT_SET_RANGE_MAX 0x02 2006 2007 /** 2008 * @brief BLE Mesh client models related definitions 2009 */ 2010 2011 /** Client model Get/Set message opcode and corresponding Status message opcode */ 2012 typedef struct { 2013 uint32_t cli_op; /*!< The client message opcode */ 2014 uint32_t status_op; /*!< The server status opcode corresponding to the client message opcode */ 2015 } esp_ble_mesh_client_op_pair_t; 2016 2017 /** Client Model user data context. */ 2018 typedef struct { 2019 esp_ble_mesh_model_t *model; /*!< Pointer to the client model. Initialized by the stack. */ 2020 int op_pair_size; /*!< Size of the op_pair */ 2021 const esp_ble_mesh_client_op_pair_t *op_pair; /*!< Table containing get/set message opcode and corresponding status message opcode */ 2022 uint32_t publish_status; /*!< Callback used to handle the received unsolicited message. Initialized by the stack. */ 2023 void *internal_data; /*!< Pointer to the internal data of client model */ 2024 uint8_t msg_role; /*!< Role of the device (Node/Provisioner) that is going to send messages */ 2025 } esp_ble_mesh_client_t; 2026 2027 /** Common parameters of the messages sent by Client Model. */ 2028 typedef struct { 2029 esp_ble_mesh_opcode_t opcode; /*!< Message opcode */ 2030 esp_ble_mesh_model_t *model; /*!< Pointer to the client model structure */ 2031 esp_ble_mesh_msg_ctx_t ctx; /*!< The context used to send message */ 2032 int32_t msg_timeout; /*!< Timeout value (ms) to get response to the sent message */ 2033 /*!< Note: if using default timeout value in menuconfig, make sure to set this value to 0 */ 2034 uint8_t msg_role; /*!< Role of the device - Node/Provisioner */ 2035 } esp_ble_mesh_client_common_param_t; 2036 2037 /** 2038 * @brief BLE Mesh server models related definitions 2039 */ 2040 2041 /** This enum value is the flag of transition timer operation */ 2042 enum { 2043 ESP_BLE_MESH_SERVER_TRANS_TIMER_START, /* Proper transition timer has been started */ 2044 ESP_BLE_MESH_SERVER_FLAG_MAX, 2045 }; 2046 2047 /** Parameters of the server model state transition */ 2048 typedef struct { 2049 bool just_started; /*!< Indicate if the state transition has just started */ 2050 2051 uint8_t trans_time; /*!< State transition time */ 2052 uint8_t remain_time; /*!< Remaining time of state transition */ 2053 uint8_t delay; /*!< Delay before starting state transition */ 2054 uint32_t quo_tt; /*!< Duration of each divided transition step */ 2055 uint32_t counter; /*!< Number of steps which the transition duration is divided */ 2056 uint32_t total_duration; /*!< State transition total duration */ 2057 int64_t start_timestamp; /*!< Time when the state transition is started */ 2058 2059 /** 2060 * Flag used to indicate if the transition timer has been started internally. 2061 * 2062 * If the model which contains esp_ble_mesh_state_transition_t sets "set_auto_rsp" 2063 * to ESP_BLE_MESH_SERVER_RSP_BY_APP, the handler of the timer shall be initialized 2064 * by the users. 2065 * 2066 * And users can use this flag to indicate whether the timer is started or not. 2067 */ 2068 BLE_MESH_ATOMIC_DEFINE(flag, ESP_BLE_MESH_SERVER_FLAG_MAX); 2069 struct k_delayed_work timer; /*!< Timer used for state transition */ 2070 } esp_ble_mesh_state_transition_t; 2071 2072 /** Parameters of the server model received last same set message. */ 2073 typedef struct { 2074 uint8_t tid; /*!< Transaction number of the last message */ 2075 uint16_t src; /*!< Source address of the last message */ 2076 uint16_t dst; /*!< Destination address of the last message */ 2077 int64_t timestamp; /*!< Time when the last message is received */ 2078 } esp_ble_mesh_last_msg_info_t; 2079 2080 #define ESP_BLE_MESH_SERVER_RSP_BY_APP 0 /*!< Response need to be sent in the application */ 2081 #define ESP_BLE_MESH_SERVER_AUTO_RSP 1 /*!< Response will be sent internally */ 2082 2083 /** Parameters of the Server Model response control */ 2084 typedef struct { 2085 /** 2086 * @brief BLE Mesh Server Response Option 2087 * 1. If get_auto_rsp is set to ESP_BLE_MESH_SERVER_RSP_BY_APP, then the 2088 * response of Client Get messages need to be replied by the application; 2089 * 2. If get_auto_rsp is set to ESP_BLE_MESH_SERVER_AUTO_RSP, then the 2090 * response of Client Get messages will be replied by the server models; 2091 * 3. If set_auto_rsp is set to ESP_BLE_MESH_SERVER_RSP_BY_APP, then the 2092 * response of Client Set messages need to be replied by the application; 2093 * 4. If set_auto_rsp is set to ESP_BLE_MESH_SERVER_AUTO_RSP, then the 2094 * response of Client Set messages will be replied by the server models; 2095 * 5. If status_auto_rsp is set to ESP_BLE_MESH_SERVER_RSP_BY_APP, then the 2096 * response of Server Status messages need to be replied by the application; 2097 * 6. If status_auto_rsp is set to ESP_BLE_MESH_SERVER_AUTO_RSP, then the 2098 * response of Server Status messages will be replied by the server models; 2099 */ 2100 uint8_t get_auto_rsp : 1, /*!< Response control for Client Get messages */ 2101 set_auto_rsp : 1, /*!< Response control for Client Set messages */ 2102 status_auto_rsp : 1; /*!< Response control for Server Status messages */ 2103 } esp_ble_mesh_server_rsp_ctrl_t; 2104 2105 /** 2106 * @brief Server model state value union 2107 */ 2108 typedef union { 2109 struct { 2110 uint8_t onoff; /*!< The value of the Generic OnOff state */ 2111 } gen_onoff; /*!< The Generic OnOff state */ 2112 struct { 2113 int16_t level; /*!< The value of the Generic Level state */ 2114 } gen_level; /*!< The Generic Level state */ 2115 struct { 2116 uint8_t onpowerup; /*!< The value of the Generic OnPowerUp state */ 2117 } gen_onpowerup; /*!< The Generic OnPowerUp state */ 2118 struct { 2119 uint16_t power; /*!< The value of the Generic Power Actual state */ 2120 } gen_power_actual; /*!< The Generic Power Actual state */ 2121 struct { 2122 uint16_t lightness; /*!< The value of the Light Lightness Actual state */ 2123 } light_lightness_actual; /*!< The Light Lightness Actual state */ 2124 struct { 2125 uint16_t lightness; /*!< The value of the Light Lightness Linear state */ 2126 } light_lightness_linear; /*!< The Light Lightness Linear state */ 2127 struct { 2128 uint16_t lightness; /*!< The value of the Light CTL Lightness state */ 2129 } light_ctl_lightness; /*!< The Light CTL Lightness state */ 2130 struct { 2131 uint16_t temperature; /*!< The value of the Light CTL Temperature state */ 2132 int16_t delta_uv; /*!< The value of the Light CTL Delta UV state */ 2133 } light_ctl_temp_delta_uv; /*!< The Light CTL Temperature & Delta UV states */ 2134 struct { 2135 uint16_t lightness; /*!< The value of the Light HSL Lightness state */ 2136 uint16_t hue; /*!< The value of the Light HSL Hue state */ 2137 uint16_t saturation; /*!< The value of the Light HSL Saturation state */ 2138 } light_hsl; /*!< The Light HSL composite state */ 2139 struct { 2140 uint16_t lightness; /*!< The value of the Light HSL Lightness state */ 2141 } light_hsl_lightness; /*!< The Light HSL Lightness state */ 2142 struct { 2143 uint16_t hue; /*!< The value of the Light HSL Hue state */ 2144 } light_hsl_hue; /*!< The Light HSL Hue state */ 2145 struct { 2146 uint16_t saturation; /*!< The value of the Light HSL Saturation state */ 2147 } light_hsl_saturation; /*!< The Light HSL Saturation state */ 2148 struct { 2149 uint16_t lightness; /*!< The value of the Light xyL Lightness state */ 2150 } light_xyl_lightness; /*!< The Light xyL Lightness state */ 2151 struct { 2152 uint8_t onoff; /*!< The value of the Light LC Light OnOff state */ 2153 } light_lc_light_onoff; /*!< The Light LC Light OnOff state */ 2154 } esp_ble_mesh_server_state_value_t; 2155 2156 /** This enum value is the type of server model states */ 2157 typedef enum { 2158 ESP_BLE_MESH_GENERIC_ONOFF_STATE, 2159 ESP_BLE_MESH_GENERIC_LEVEL_STATE, 2160 ESP_BLE_MESH_GENERIC_ONPOWERUP_STATE, 2161 ESP_BLE_MESH_GENERIC_POWER_ACTUAL_STATE, 2162 ESP_BLE_MESH_LIGHT_LIGHTNESS_ACTUAL_STATE, 2163 ESP_BLE_MESH_LIGHT_LIGHTNESS_LINEAR_STATE, 2164 ESP_BLE_MESH_LIGHT_CTL_LIGHTNESS_STATE, 2165 ESP_BLE_MESH_LIGHT_CTL_TEMP_DELTA_UV_STATE, 2166 ESP_BLE_MESH_LIGHT_HSL_STATE, 2167 ESP_BLE_MESH_LIGHT_HSL_LIGHTNESS_STATE, 2168 ESP_BLE_MESH_LIGHT_HSL_HUE_STATE, 2169 ESP_BLE_MESH_LIGHT_HSL_SATURATION_STATE, 2170 ESP_BLE_MESH_LIGHT_XYL_LIGHTNESS_STATE, 2171 ESP_BLE_MESH_LIGHT_LC_LIGHT_ONOFF_STATE, 2172 ESP_BLE_MESH_SERVER_MODEL_STATE_MAX, 2173 } esp_ble_mesh_server_state_type_t; 2174 2175 /*!< This enum value is the event of undefined SIG models and vendor models */ 2176 typedef enum { 2177 ESP_BLE_MESH_MODEL_OPERATION_EVT, /*!< User-defined models receive messages from peer devices (e.g. get, set, status, etc) event */ 2178 ESP_BLE_MESH_MODEL_SEND_COMP_EVT, /*!< User-defined models send messages completion event */ 2179 ESP_BLE_MESH_MODEL_PUBLISH_COMP_EVT, /*!< User-defined models publish messages completion event */ 2180 ESP_BLE_MESH_CLIENT_MODEL_RECV_PUBLISH_MSG_EVT, /*!< User-defined client models receive publish messages event */ 2181 ESP_BLE_MESH_CLIENT_MODEL_SEND_TIMEOUT_EVT, /*!< Timeout event for the user-defined client models that failed to receive response from peer server models */ 2182 ESP_BLE_MESH_MODEL_PUBLISH_UPDATE_EVT, /*!< When a model is configured to publish messages periodically, this event will occur during every publish period */ 2183 ESP_BLE_MESH_SERVER_MODEL_UPDATE_STATE_COMP_EVT, /*!< Server models update state value completion event */ 2184 ESP_BLE_MESH_MODEL_EVT_MAX, 2185 } esp_ble_mesh_model_cb_event_t; 2186 2187 /** 2188 * @brief BLE Mesh model callback parameters union 2189 */ 2190 typedef union { 2191 /** 2192 * @brief ESP_BLE_MESH_MODEL_OPERATION_EVT 2193 */ 2194 struct ble_mesh_model_operation_evt_param { 2195 uint32_t opcode; /*!< Opcode of the received message */ 2196 esp_ble_mesh_model_t *model; /*!< Pointer to the model which receives the message */ 2197 esp_ble_mesh_msg_ctx_t *ctx; /*!< Pointer to the context of the received message */ 2198 uint16_t length; /*!< Length of the received message */ 2199 uint8_t *msg; /*!< Value of the received message */ 2200 } model_operation; /*!< Event parameter of ESP_BLE_MESH_MODEL_OPERATION_EVT */ 2201 /** 2202 * @brief ESP_BLE_MESH_MODEL_SEND_COMP_EVT 2203 */ 2204 struct ble_mesh_model_send_comp_param { 2205 int err_code; /*!< Indicate the result of sending a message */ 2206 uint32_t opcode; /*!< Opcode of the message */ 2207 esp_ble_mesh_model_t *model; /*!< Pointer to the model which sends the message */ 2208 esp_ble_mesh_msg_ctx_t *ctx; /*!< Context of the message */ 2209 } model_send_comp; /*!< Event parameter of ESP_BLE_MESH_MODEL_SEND_COMP_EVT */ 2210 /** 2211 * @brief ESP_BLE_MESH_MODEL_PUBLISH_COMP_EVT 2212 */ 2213 struct ble_mesh_model_publish_comp_param { 2214 int err_code; /*!< Indicate the result of publishing a message */ 2215 esp_ble_mesh_model_t *model; /*!< Pointer to the model which publishes the message */ 2216 } model_publish_comp; /*!< Event parameter of ESP_BLE_MESH_MODEL_PUBLISH_COMP_EVT */ 2217 /** 2218 * @brief ESP_BLE_MESH_CLIENT_MODEL_RECV_PUBLISH_MSG_EVT 2219 */ 2220 struct ble_mesh_mod_recv_publish_msg_param { 2221 uint32_t opcode; /*!< Opcode of the unsolicited received message */ 2222 esp_ble_mesh_model_t *model; /*!< Pointer to the model which receives the message */ 2223 esp_ble_mesh_msg_ctx_t *ctx; /*!< Pointer to the context of the message */ 2224 uint16_t length; /*!< Length of the received message */ 2225 uint8_t *msg; /*!< Value of the received message */ 2226 } client_recv_publish_msg; /*!< Event parameter of ESP_BLE_MESH_CLIENT_MODEL_RECV_PUBLISH_MSG_EVT */ 2227 /** 2228 * @brief ESP_BLE_MESH_CLIENT_MODEL_SEND_TIMEOUT_EVT 2229 */ 2230 struct ble_mesh_client_model_send_timeout_param { 2231 uint32_t opcode; /*!< Opcode of the previously sent message */ 2232 esp_ble_mesh_model_t *model; /*!< Pointer to the model which sends the previous message */ 2233 esp_ble_mesh_msg_ctx_t *ctx; /*!< Pointer to the context of the previous message */ 2234 } client_send_timeout; /*!< Event parameter of ESP_BLE_MESH_CLIENT_MODEL_SEND_TIMEOUT_EVT */ 2235 /** 2236 * @brief ESP_BLE_MESH_MODEL_PUBLISH_UPDATE_EVT 2237 */ 2238 struct ble_mesh_model_publish_update_evt_param { 2239 esp_ble_mesh_model_t *model; /*!< Pointer to the model which is going to update its publish message */ 2240 } model_publish_update; /*!< Event parameter of ESP_BLE_MESH_MODEL_PUBLISH_UPDATE_EVT */ 2241 /** 2242 * @brief ESP_BLE_MESH_SERVER_MODEL_UPDATE_STATE_COMP_EVT 2243 */ 2244 struct ble_mesh_server_model_update_state_comp_param { 2245 int err_code; /*!< Indicate the result of updating server model state */ 2246 esp_ble_mesh_model_t *model; /*!< Pointer to the server model which state value is updated */ 2247 esp_ble_mesh_server_state_type_t type; /*!< Type of the updated server state */ 2248 } server_model_update_state; /*!< Event parameter of ESP_BLE_MESH_SERVER_MODEL_UPDATE_STATE_COMP_EVT */ 2249 } esp_ble_mesh_model_cb_param_t; 2250 2251 #ifdef __cplusplus 2252 } 2253 #endif 2254 2255 #endif /* _ESP_BLE_MESH_DEFS_H_ */ 2256
