1# USB HID configuration options 2 3# Copyright (c) 2018 Intel Corp. 4# SPDX-License-Identifier: Apache-2.0 5 6menuconfig USB_DEVICE_HID 7 bool "USB Human Interface Device support" 8 help 9 Enables USB Human Interface Device support. Default device name 10 is "HID_0". 11 12if USB_DEVICE_HID 13 14config USB_HID_DEVICE_NAME 15 string "USB HID device name template" 16 default "HID" 17 help 18 Device name template for the HID Devices. First device would have 19 name $(USB_HID_DEVICE_NAME)_0, etc. 20 21module = USB_HID 22default-count = 1 23source "subsys/usb/device/class/Kconfig.template.composite_device_number" 24 25module = USB_HID 26module-str = usb hid 27source "subsys/logging/Kconfig.template.log_config" 28 29config ENABLE_HID_INT_OUT_EP 30 bool "USB HID Device Interrupt OUT Endpoint" 31 help 32 Enable USB HID Device Interrupt OUT Endpoint. 33 34config HID_INTERRUPT_EP_MPS 35 int "USB HID Device Interrupt Endpoint size" 36 default 16 37 help 38 USB HID Device interrupt endpoint size 39 40config USB_HID_POLL_INTERVAL_MS 41 int "Polling interval" 42 default 9 43 help 44 Polling interval in ms selected by the USB HID Device. 45 46config USB_HID_REPORTS 47 int "Number of HID idle reports in the instance" 48 default 1 49 range 1 256 50 help 51 This configuration is only necessary if the application must 52 support USB HID idle rate and Set/Get Idle Requests. 53 The application can use Report ID to identify data fields 54 in the report descriptor and report itself. 55 This configuration value should correspond to the number of Input 56 Report IDs, the gaps and offset in Report IDs can not be supported. 57 Set this configuration value to 1 if Report IDs are not used but 58 idle rate must be supported. 59 60config USB_HID_BOOT_PROTOCOL 61 bool "USB HID Boot Protocol handling" 62 help 63 Sets bInterfaceSubClass to 1 and enables Set_Protocol and Get_Protocol 64 requests handling. 65 See Chapter 4.2 of Device Class Definition for Human Interface Devices 1.11 66 for more information. 67 68endif # USB_DEVICE_HID 69
