1# u-blox SARA R4 driver options
2
3# Copyright (c) 2019 Foundries.io
4# SPDX-License-Identifier: Apache-2.0
5
6config MODEM_UBLOX_SARA
7	bool "U-blox SARA modem driver"
8	select MODEM_CONTEXT
9	select MODEM_CMD_HANDLER
10	select MODEM_IFACE_UART
11	select MODEM_SOCKET
12	select NET_OFFLOAD
13	select NET_SOCKETS_OFFLOAD
14	help
15	  Choose this setting to enable u-blox SARA-R4 LTE-CatM1/NB-IoT modem
16	  driver.
17
18if MODEM_UBLOX_SARA
19
20choice MODEM_UBLOX_SARA_VARIANT
21	bool "u-blox SARA variant selection"
22	default MODEM_UBLOX_SARA_R4
23
24config MODEM_UBLOX_SARA_R4
25	bool "u-blox SARA-R4"
26	help
27	  Enable support for SARA-R4 modem
28
29config MODEM_UBLOX_SARA_U2
30	bool "u-blox SARA-U2"
31	help
32	  Enable support for SARA-U2 modem
33
34config MODEM_UBLOX_SARA_AUTODETECT_VARIANT
35	bool "detect automatically"
36	help
37	  Enable automatic detection of modem variant (SARA-R4 or SARA-U2)
38
39endchoice
40
41config MODEM_UBLOX_SARA_R4_RX_STACK_SIZE
42	int "Stack size for the u-blox SARA-R4 modem driver RX thread"
43	default 1028
44	help
45	  This stack is used by the u-blox SARA-R4 RX thread.
46
47config MODEM_UBLOX_SARA_R4_RX_WORKQ_STACK_SIZE
48	int "Stack size for the u-blox SARA-R4 modem driver work queue"
49	default 2048
50	help
51	  This stack is used by the work queue to pass off net_pkt data
52	  to the rest of the network stack, letting the rx thread continue
53	  processing data.
54
55config MODEM_UBLOX_SARA_R4_APN
56	string "APN for establishing network connection"
57	default "hologram"
58	help
59	  This setting is used in the AT+CGDCONT command to set the APN name
60	  for the network connection context.  This value is specific to
61	  the network provider and may need to be changed.
62
63config MODEM_UBLOX_SARA_AUTODETECT_APN
64	bool "detect APN automatically"
65	help
66	  Enable automatic detection of the APN, based on the IMSI
67	  If the detection fails, the configured APN will be used
68
69config MODEM_UBLOX_SARA_AUTODETECT_APN_PROFILES
70	string "list of profiles to search when autodetecting APN"
71	default "hologram=23450, wm=20601 29505 29509 23450 53703 90143"
72	help
73	  Set a comma separated list of profiles, each containing of:
74	  <apn>=<IMSI_1> ... <IMSI_n>
75
76config MODEM_UBLOX_SARA_R4_MANUAL_MCCMNO
77	string "MCC/MNOfor establishing network connection"
78	help
79	  This setting is used in the AT+COPS command to set the MCC/MNO
80	  for the network connection context.  This value is specific to
81	  the network provider and may need to be changed if auto is not
82	  selected.
83
84config MODEM_UBLOX_SARA_R4_INIT_PRIORITY
85	int "u-blox SARA-R4 driver init priority"
86	default 80
87	help
88	  u-blox SARA-R4 device driver initialization priority.
89	  Do not mess with it unless you know what you are doing.
90	  Note that the priority needs to be lower than the net stack
91	  so that it can start before the networking sub-system.
92
93config MODEM_UBLOX_SARA_R4_NET_STATUS
94	bool "Support for network status indication"
95	help
96	  Choose this setting to use a modem GPIO pin as network indication.
97
98if MODEM_UBLOX_SARA_R4_NET_STATUS
99
100config MODEM_UBLOX_SARA_R4_NET_STATUS_PIN
101	int "Network status indication GPIO ID"
102	default 16
103	help
104	  This setting is used to configure one of the modem's GPIO pins
105	  as a network status indication.  See the manual for the gpio ids
106	  and how they map to pin numbers.
107
108endif # MODEM_UBLOX_SARA_R4_NET_STATUS
109
110config MODEM_UBLOX_SARA_RSSI_WORK
111	bool "RSSI polling work"
112	default y
113	help
114	  u-blox SARA-R4 device is configured to poll for RSSI
115
116config MODEM_UBLOX_SARA_RSSI_WORK_PERIOD
117	int "Configure RSSI WORK polling frequency"
118	depends on MODEM_UBLOX_SARA_RSSI_WORK
119	default 30
120	help
121	  This settings is used to configure the period of RSSI polling
122
123endif # MODEM_UBLOX_SARA
124