xref: /hal_nxp-3.5.0/mcux/mcux-sdk/drivers/caam/fsl_caam.c

/*
 * Copyright (c) 2016, Freescale Semiconductor, Inc.
 * Copyright 2016-2022 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include "fsl_caam.h"
#include "fsl_clock.h"

#if defined(FSL_FEATURE_HAS_L1CACHE) || defined(__DCACHE_PRESENT)
#include "fsl_cache.h"

#if defined(CACHE_MODE_WRITE_THROUGH) && CACHE_MODE_WRITE_THROUGH
#define CAAM_OUT_INVALIDATE (1u)
#else
#warning "DCACHE must be set to write-trough mode to safely invalidate cache!!"
#endif /* CACHE_MODE_WRITE_THROUGH */

#endif /* defined(FSL_FEATURE_HAS_L1CACHE) || defined(__DCACHE_PRESENT) */

/*******************************************************************************
 * Definitions
 ******************************************************************************/

/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.caam"
#endif

/*! Compile time sizeof() check */
#define BUILD_ASSURE(condition, msg) extern int msg[1 - 2 * (!(condition))] __attribute__((unused))

/*! AESA XCBC-MAC or CMAC request CLASS 1 (default) or CLASS 2 CHA */
#ifndef CAAM_AES_MAC_CLASS
#define CAAM_AES_MAC_CLASS_1 0x02000000u
#define CAAM_AES_MAC_CLASS_2 0x04000000u
#define CAAM_AES_MAC_CLASS   CAAM_AES_MAC_CLASS_1
#endif

/*! IRBAR and ORBAR job ring registers are 64-bit. these macros access least significant address 32-bit word. */
#define IRBAR0 *(((volatile uint32_t *)(uint32_t) & (base->JOBRING[0].IRBAR_JR)) + 1)
#define ORBAR0 *(((volatile uint32_t *)(uint32_t) & (base->JOBRING[0].ORBAR_JR)) + 1)
#define IRBAR1 *(((volatile uint32_t *)(uint32_t) & (base->JOBRING[1].IRBAR_JR)) + 1)
#define ORBAR1 *(((volatile uint32_t *)(uint32_t) & (base->JOBRING[1].ORBAR_JR)) + 1)
#define IRBAR2 *(((volatile uint32_t *)(uint32_t) & (base->JOBRING[2].IRBAR_JR)) + 1)
#define ORBAR2 *(((volatile uint32_t *)(uint32_t) & (base->JOBRING[2].ORBAR_JR)) + 1)
#define IRBAR3 *(((volatile uint32_t *)(uint32_t) & (base->JOBRING[3].IRBAR_JR)) + 1)
#define ORBAR3 *(((volatile uint32_t *)(uint32_t) & (base->JOBRING[3].ORBAR_JR)) + 1)

/*! Job Descriptor defines */
#define DESC_SIZE_MASK         0x0000003Fu
#define DESC_KEY_SIZE_MASK     0x3FFu
#define DESC_PAYLOAD_SIZE_MASK 0x0000FFFFu
#define DESC_LC1_MASK          0x00020000u
#define DESC_TAG_SIZE_MASK     0xFFu
#define DESC_HALT              0xA0C00000u
#define DESC_JUMP_2            0xA0000002u
#define DESC_JUMP_4            0xA0000004u
#define DESC_JUMP_6            0xA0000006u
#define DESC_BLACKKEY_NOMMEN   0x4u
#define SEC_MEM                0x8u

typedef enum _caam_algorithm
{
    kCAAM_AlgorithmAES    = 0x10u << 16,
    kCAAM_AlgorithmDES    = 0x20u << 16,
    kCAAM_Algorithm3DES   = 0x21u << 16,
    kCAAM_AlgorithmSHA1   = 0x41u << 16,
    kCAAM_AlgorithmSHA224 = 0x42u << 16,
    kCAAM_AlgorithmSHA256 = 0x43u << 16,
    kCAAM_AlgorithmSHA384 = 0x44u << 16,
    kCAAM_AlgorithmSHA512 = 0x45u << 16,
    kCAAM_AlgorithmCRC    = 0x90u << 16,
} caam_algorithm_t;

typedef enum _caam_aai_symmetric_alg
{
    kCAAM_ModeCTR     = 0x00U << 4,
    kCAAM_ModeCBC     = 0x10U << 4,
    kCAAM_ModeECB     = 0x20U << 4,
    kCAAM_ModeCFB     = 0x30U << 4,
    kCAAM_ModeOFB     = 0x40U << 4,
    kCAAM_ModeCMAC    = 0x60U << 4,
    kCAAM_ModeXCBCMAC = 0x70U << 4,
    kCAAM_ModeCCM     = 0x80U << 4,
    kCAAM_ModeGCM     = 0x90U << 4,
} caam_aai_symmetric_alg_t;

typedef enum _caam_algorithm_state
{
    kCAAM_AlgStateUpdate    = 0u,
    kCAAM_AlgStateInit      = 1u,
    kCAAM_AlgStateFinal     = 2u,
    kCAAM_AlgStateInitFinal = 3u,
} caam_algorithm_state_t;

/*******************************************************************************
 * HASH Definitions
 ******************************************************************************/
enum _caam_sha_digest_len
{
    kCAAM_RunLenSha1   = 28u,
    kCAAM_OutLenSha1   = 20u,
    kCAAM_RunLenSha224 = 40u,
    kCAAM_OutLenSha224 = 28u,
    kCAAM_RunLenSha256 = 40u,
    kCAAM_OutLenSha256 = 32u,
    kCAAM_RunLenSha384 = 64u,
    kCAAM_OutLenSha384 = 48u,
    kCAAM_RunLenSha512 = 64u,
    kCAAM_OutLenSha512 = 64u,
};

/*! Internal states of the HASH creation process */
typedef enum _caam_hash_algo_state
{
    kCAAM_HashInit = 1u, /*!< Key in the HASH context is the input key. */
    kCAAM_HashUpdate,    /*!< HASH context has algorithm specific context: MAC, K2 and K3 (XCBC-MAC), MAC and L (CMAC),
                             running digest (MDHA). Key in the HASH context is the derived key. */
} caam_hash_algo_state_t;

/*! 64-byte block represented as byte array or 16 32-bit words */
typedef union _caam_hash_block
{
    uint32_t w[CAAM_HASH_BLOCK_SIZE / 4]; /*!< array of 32-bit words */
    uint8_t b[CAAM_HASH_BLOCK_SIZE];      /*!< byte array */
} caam_hash_block_t;

/*! Definitions of indexes into hash context array */
typedef enum _caam_hash_ctx_indexes
{
    kCAAM_HashCtxKeyStartIdx = 12, /*!< context word array index where key is stored */
    kCAAM_HashCtxKeySize     = 20, /*!< context word array index where key size is stored */
    kCAAM_HashCtxNumWords    = 21, /*!< number of context array 32-bit words  */
} caam_hash_ctx_indexes;

typedef struct _caam_hash_ctx_internal
{
    caam_hash_block_t blk; /*!< memory buffer. only full 64-byte blocks are written to CAAM during hash updates */
    uint32_t word[kCAAM_HashCtxNumWords]; /*!< CAAM module context that needs to be saved/restored between CAAM jobs */
    uint32_t blksz;                       /*!< number of valid bytes in memory buffer */
    CAAM_Type *base;                      /*!< CAAM peripheral base address */
    caam_handle_t *handle;                /*!< CAAM handle (specifies jobRing and optional callback function) */
    caam_hash_algo_t algo; /*!< selected algorithm from the set of supported algorithms in caam_hash_algo_t */
    caam_hash_algo_state_t fsm_state; /*!< finite machine state of the hash software process */
} caam_hash_ctx_internal_t;

/*! Definitions of indexes into hash job descriptor */
enum _caam_hash_sgt_index
{
    kCAAM_HashDescriptorSgtIdx = 14u, /*!< Index of the hash job descriptor[] where the two entry SGT starts. */
};

/*! One entry in the SGT */
typedef struct _caam_sgt_entry
{
    /* 64-bit address. */
    uint32_t address_h;
    uint32_t address_l;
    uint32_t length;
    uint32_t offset;
} caam_sgt_entry_t;

/*! Definitions SGT entry type */
typedef enum _caam_hash_sgt_entry_type
{
    kCAAM_HashSgtEntryNotLast = 0u, /*!< Do not set the Final Bit in SGT entries */
    kCAAM_HashSgtEntryLast    = 1u, /*!< Sets Final Bit in the last SGT entry */
} caam_hash_sgt_entry_type_t;

/*! Two entry SGT, embedded in the hash job descriptor */
typedef caam_sgt_entry_t caam_hash_internal_sgt_t[2];

/*! Definitions of SGT type */
typedef enum _caam_hash_sgt_type
{
    kCAAM_HashSgtInternal = 0u, /*!< Two entry SGT is copied into the hash job descriptor. */
    kCAAM_HashSgtExternal = 1u, /*!< Use external SGT. */
} caam_hash_sgt_type_t;

enum _caam_hash_non_blocking_sgt_entries
{
    kCAAM_HashSgtMaxCtxEntries =
        (sizeof(caam_hash_block_t) + sizeof(uint32_t) * kCAAM_HashCtxKeyStartIdx) / sizeof(caam_sgt_entry_t),
};

typedef struct _caam_crc_ctx_internal
{
    caam_hash_block_t blk; /*!< memory buffer. only full 64-byte blocks are written to CAAM during hash updates */
    uint32_t word[kCAAM_HashCtxNumWords]; /*!< CAAM module context that needs to be saved/restored between CAAM jobs */
    uint32_t blksz;                       /*!< number of valid bytes in memory buffer */
    CAAM_Type *base;                      /*!< CAAM peripheral base address */
    caam_handle_t *handle;                /*!< CAAM handle (specifies jobRing and optional callback function) */
    caam_crc_algo_t algo;       /*!< selected algorithm from the set of supported algorithms in caam_hash_algo_t */
    caam_aai_crc_alg_t crcmode; /*!< Specifies how CRC engine manipulates input and output data */
    caam_hash_algo_state_t fsm_state; /*!< finite machine state of the hash software process */
} caam_crc_ctx_internal_t;

/*******************************************************************************
 * Variables
 ******************************************************************************/
static caam_job_ring_interface_t *s_jr0 = NULL; /*!< Pointer to job ring interface 0. */
static uint32_t s_jrIndex0              = 0;    /*!< Current index in the input job ring 0. */

static caam_job_ring_interface_t *s_jr1 = NULL; /*!< Pointer to job ring interface 1. */
static uint32_t s_jrIndex1              = 0;    /*!< Current index in the input job ring 1. */

static caam_job_ring_interface_t *s_jr2 = NULL; /*!< Pointer to job ring interface 2. */
static uint32_t s_jrIndex2              = 0;    /*!< Current index in the input job ring 2. */

static caam_job_ring_interface_t *s_jr3 = NULL; /*!< Pointer to job ring interface 3. */
static uint32_t s_jrIndex3              = 0;    /*!< Current index in the input job ring 3. */

AT_NONCACHEABLE_SECTION(static caam_rng_config_t rngConfig);
AT_NONCACHEABLE_SECTION(static caam_desc_rng_t rngGenSeckey);
AT_NONCACHEABLE_SECTION(static caam_desc_rng_t rngInstantiate);
AT_NONCACHEABLE_SECTION(static caam_desc_rng_t descBuf);
/*******************************************************************************
 * Code
 ******************************************************************************/

/*******************************************************************************
 * CAAM Common code static
 ******************************************************************************/

/* Macros and functions computing data offset for descriptors */
#if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET)
#include "fsl_memory.h"

#ifndef FSL_MEM_M4_TCM_OFFSET
#define CAAM_OFFSET 0U
#else
#define CAAM_OFFSET FSL_MEM_M4_TCM_OFFSET
#endif

static uint32_t ADD_OFFSET(uint32_t addr)
{
    if (addr > FSL_MEM_M4_TCM_END)
    {
        return addr;
    }
    else if (addr < FSL_MEM_M4_TCM_BEGIN)
    {
        return addr;
    }
    else
    {
        return addr + CAAM_OFFSET;
    }
}

#else  /* !defined(FLS_FEATURE_CAAM_OFFSET) */
static uint32_t ADD_OFFSET(uint32_t addr)
{
    return addr;
}
#endif /* FLS_FEATURE_CAAM_OFFSET */

#if 0
/* for build without string.h memcpy() */
static void caam_memcpy(void *dst, const void *src, size_t size)
{
    register uint8_t *to = (uint8_t *)(uintptr_t)dst;
    register const uint8_t *from = (const uint8_t *)(uintptr_t)src;

    /* if it is possible to move data with 32-bit aligned access, do it so */
    if ((size >= sizeof(uint32_t)) && (0u == ((uintptr_t)dst & 0x3u)) && (0u == ((uintptr_t)src & 0x3u)))
    {
        register uint32_t *to32 = (uint32_t *)(uintptr_t)dst;
        register const uint32_t *from32 = (const uint32_t *)(uintptr_t)src;
        while (size >= sizeof(uint32_t))
        {
            *to32 = *from32;
            size -= sizeof(uint32_t);
            to32++;
            from32++;
        }

        to = (uint8_t *)(uintptr_t)to32;
        from = (const uint8_t *)(uintptr_t)from32;
    }

    while (size)
    {
        *to = *from;
        size--;
        to++;
        from++;
    }
}
#else
#include <string.h>
#define caam_memcpy memcpy
#endif

static void caam_job_ring_set_base_address_and_size(CAAM_Type *base,
                                                    caam_job_ring_t jr,
                                                    uint32_t *inputRingBase,
                                                    size_t inputRingSize,
                                                    uint32_t *outputRingBase,
                                                    uint32_t outputRingSize)
{
    if (kCAAM_JobRing0 == jr)
    {
        IRBAR0                   = ADD_OFFSET((uint32_t)inputRingBase);
        base->JOBRING[0].IRSR_JR = inputRingSize;
        ORBAR0                   = ADD_OFFSET((uint32_t)outputRingBase);
        base->JOBRING[0].ORSR_JR = outputRingSize;
    }

    if (kCAAM_JobRing1 == jr)
    {
        IRBAR1                   = (uintptr_t)ADD_OFFSET((uint32_t)inputRingBase);
        base->JOBRING[1].IRSR_JR = inputRingSize;
        ORBAR1                   = (uintptr_t)ADD_OFFSET((uint32_t)outputRingBase);
        base->JOBRING[1].ORSR_JR = outputRingSize;
    }

    if (kCAAM_JobRing2 == jr)
    {
        IRBAR2                   = (uintptr_t)ADD_OFFSET((uint32_t)inputRingBase);
        base->JOBRING[2].IRSR_JR = inputRingSize;
        ORBAR2                   = (uintptr_t)ADD_OFFSET((uint32_t)outputRingBase);
        base->JOBRING[2].ORSR_JR = outputRingSize;
    }

    if (kCAAM_JobRing3 == jr)
    {
        IRBAR3                   = (uintptr_t)ADD_OFFSET((uint32_t)inputRingBase);
        base->JOBRING[3].IRSR_JR = inputRingSize;
        ORBAR3                   = (uintptr_t)ADD_OFFSET((uint32_t)outputRingBase);
        base->JOBRING[3].ORSR_JR = outputRingSize;
    }
}

static inline void caam_input_ring_set_jobs_added(CAAM_Type *base, caam_job_ring_t jr, uint32_t numJobsAdded)
{
    /* Data and Instruction Synchronization Barrier to make sure */
    /* that the descriptor will be loaded into CAAM in time*/
    __ISB();
    __DSB();

    if (kCAAM_JobRing0 == jr)
    {
        base->JOBRING[0].IRJAR_JR = numJobsAdded;
    }

    if (kCAAM_JobRing1 == jr)
    {
        base->JOBRING[1].IRJAR_JR = numJobsAdded;
    }

    if (kCAAM_JobRing2 == jr)
    {
        base->JOBRING[2].IRJAR_JR = numJobsAdded;
    }

    if (kCAAM_JobRing3 == jr)
    {
        base->JOBRING[3].IRJAR_JR = numJobsAdded;
    }
}

static inline void caam_output_ring_set_jobs_removed(CAAM_Type *base, caam_job_ring_t jr, uint32_t numJobsRemoved)
{
    if (kCAAM_JobRing0 == jr)
    {
        base->JOBRING[0].ORJRR_JR = numJobsRemoved;
    }

    if (kCAAM_JobRing1 == jr)
    {
        base->JOBRING[1].ORJRR_JR = numJobsRemoved;
    }

    if (kCAAM_JobRing2 == jr)
    {
        base->JOBRING[2].ORJRR_JR = numJobsRemoved;
    }

    if (kCAAM_JobRing3 == jr)
    {
        base->JOBRING[3].ORJRR_JR = numJobsRemoved;
    }
}

static uint32_t caam_output_ring_get_slots_full(CAAM_Type *base, caam_job_ring_t jr)
{
    uint32_t retVal = 0;

    if (kCAAM_JobRing0 == jr)
    {
        retVal = base->JOBRING[0].ORSFR_JR;
    }

    if (kCAAM_JobRing1 == jr)
    {
        retVal = base->JOBRING[1].ORSFR_JR;
    }

    if (kCAAM_JobRing2 == jr)
    {
        retVal = base->JOBRING[2].ORSFR_JR;
    }

    if (kCAAM_JobRing3 == jr)
    {
        retVal = base->JOBRING[3].ORSFR_JR;
    }

    return retVal;
}

/*!
 * @brief Tests the correct key size.
 *
 * This function tests the correct key size.
 * @param keySize Input key length in bytes.
 * @return True if the key length is supported, false if not.
 */
bool caam_check_key_size(const uint32_t keySize);
bool caam_check_key_size(const uint32_t keySize)
{
    return ((keySize == 16u) || ((keySize == 24u)) || ((keySize == 32u)));
}

static status_t caam_in_job_ring_add(CAAM_Type *base, caam_job_ring_t jobRing, uint32_t *descaddr)
{
    /* adding new job to the s_inJobRing[] must be atomic
     * as this is global variable
     */
    uint32_t currPriMask = DisableGlobalIRQ();

    if (kCAAM_JobRing0 == jobRing)
    {
        s_jr0->inputJobRing[s_jrIndex0] = (ADD_OFFSET((uint32_t)descaddr));
        s_jrIndex0++;
        if (s_jrIndex0 >= ARRAY_SIZE(s_jr0->inputJobRing))
        {
            s_jrIndex0 = 0;
        }
    }
    else if (kCAAM_JobRing1 == jobRing)
    {
        s_jr1->inputJobRing[s_jrIndex1] = ADD_OFFSET((uint32_t)descaddr);
        s_jrIndex1++;
        if (s_jrIndex1 >= ARRAY_SIZE(s_jr1->inputJobRing))
        {
            s_jrIndex1 = 0;
        }
    }
    else if (kCAAM_JobRing2 == jobRing)
    {
        s_jr2->inputJobRing[s_jrIndex2] = ADD_OFFSET((uint32_t)descaddr);
        s_jrIndex2++;
        if (s_jrIndex2 >= ARRAY_SIZE(s_jr2->inputJobRing))
        {
            s_jrIndex2 = 0;
        }
    }
    else if (kCAAM_JobRing3 == jobRing)
    {
        s_jr3->inputJobRing[s_jrIndex3] = ADD_OFFSET((uint32_t)descaddr);
        s_jrIndex3++;
        if (s_jrIndex3 >= ARRAY_SIZE(s_jr3->inputJobRing))
        {
            s_jrIndex3 = 0;
        }
    }
    else
    {
        EnableGlobalIRQ(currPriMask);
        return kStatus_InvalidArgument;
    }

    caam_input_ring_set_jobs_added(base, jobRing, 1);

    /* Enable IRQ */
    EnableGlobalIRQ(currPriMask);

    return kStatus_Success;
}

/* this function shall be only called inside CAAM driver critical section
 * because it accesses global variables.
 */
static status_t caam_out_job_ring_remove(CAAM_Type *base, caam_job_ring_t jobRing, int outIndex)
{
    if (kCAAM_JobRing0 == jobRing)
    {
        s_jr0->outputJobRing[outIndex++] = 0; /* clear descriptor address */
        s_jr0->outputJobRing[outIndex]   = 0; /* clear status */
    }
    else if (kCAAM_JobRing1 == jobRing)
    {
        s_jr1->outputJobRing[outIndex++] = 0; /* clear descriptor address */
        s_jr1->outputJobRing[outIndex]   = 0; /* clear status */
    }
    else if (kCAAM_JobRing2 == jobRing)
    {
        s_jr2->outputJobRing[outIndex++] = 0; /* clear descriptor address */
        s_jr2->outputJobRing[outIndex]   = 0; /* clear status */
    }
    else if (kCAAM_JobRing3 == jobRing)
    {
        s_jr3->outputJobRing[outIndex++] = 0; /* clear descriptor address */
        s_jr3->outputJobRing[outIndex]   = 0; /* clear status */
    }
    else
    {
        /* Intentional empty */
    }

    caam_output_ring_set_jobs_removed(base, jobRing, 1);
    return 0;
}

static status_t caam_out_job_ring_test_and_remove(
    CAAM_Type *base, caam_job_ring_t jobRing, uint32_t *descriptor, bool *wait, bool *found)
{
    uint32_t currPriMask = DisableGlobalIRQ();
    uint32_t i;
    status_t status;

    *found = false;
    *wait  = true;
    status = kStatus_Success;
    uint32_t *jr;
    uint32_t jrEntries;

    if (jobRing == kCAAM_JobRing0)
    {
        jr        = s_jr0->outputJobRing;
        jrEntries = ARRAY_SIZE(s_jr0->outputJobRing);
    }
    else if (jobRing == kCAAM_JobRing1)
    {
        jr        = s_jr1->outputJobRing;
        jrEntries = ARRAY_SIZE(s_jr1->outputJobRing);
    }
    else if (jobRing == kCAAM_JobRing2)
    {
        jr        = s_jr2->outputJobRing;
        jrEntries = ARRAY_SIZE(s_jr2->outputJobRing);
    }
    else if (jobRing == kCAAM_JobRing3)
    {
        jr        = s_jr3->outputJobRing;
        jrEntries = ARRAY_SIZE(s_jr3->outputJobRing);
    }
    else
    {
        return kStatus_InvalidArgument;
    }

    /* check if an interrupt or other thread consumed the result that we just saw */
    if ((caam_output_ring_get_slots_full(base, jobRing)) != 0U)
    {
        /* check if our descriptor is in the output job ring
         * look from the beginning of the out job ring
         */
        i = 0;

        while ((!*found) && (i < jrEntries))
        {
            if (jr[i] == (uint32_t)descriptor)
            {
                *found = true;
                *wait  = false;
                /* check for error in status word */
                if ((jr[i + 1U]) != 0U)
                {
                    /* printf("Error 0x%lx\r\n", jr[i + 1]); */

                    /* for JMP/HALT commands with User specified status, return the user status, just to allow the
                     * software to test for user status termination status words */
                    /* This is used by PKHA PrimalityTest to report a candidate is believed not being prime */
                    if (0x30000000u == (jr[i + 1U] & 0xff000000u))
                    {
                        status = (int32_t)jr[i + 1U];
                    }
                    else
                    {
                        status = kStatus_Fail;
                    }
                }
                (void)caam_out_job_ring_remove(base, jobRing, (int)i);
            }
            else
            {
                /* try next result */
                i += 2u;
            }
        }
    }
    EnableGlobalIRQ(currPriMask);
    return status;
}

typedef union _caam_xcm_block_t
{
    uint32_t w[4]; /*!< CAAM context register is 16 bytes written as four 32-bit words */
    uint8_t b[16]; /*!< 16 octets block for CCM B0 and CTR0 and for GCM */
} caam_xcm_block_t;

static uint32_t swap_bytes(uint32_t in)
{
    return (((in & 0x000000ffu) << 24) | ((in & 0x0000ff00u) << 8) | ((in & 0x00ff0000u) >> 8) |
            ((in & 0xff000000u) >> 24));
}

/*!
 * @brief AES GCM check validity of input arguments.
 *
 * This function checks the validity of input arguments.
 *
 * @param base LTC peripheral base address.
 * @param src Source address (plaintext or ciphertext).
 * @param iv Initialization vector address.
 * @param aad Additional authenticated data address.
 * @param dst Destination address (plaintext or ciphertext).
 * @param inputSize Size of input (same size as output) data in bytes.
 * @param ivSize Size of Initialization vector in bytes.
 * @param aadSize Size of additional data in bytes.
 * @param tagSize Size of the GCM tag in bytes.
 */
static status_t caam_aes_gcm_check_input_args(CAAM_Type *base,
                                              const uint8_t *src,
                                              const uint8_t *iv,
                                              const uint8_t *aad,
                                              uint8_t *dst,
                                              size_t inputSize,
                                              size_t ivSize,
                                              size_t aadSize,
                                              size_t tagSize)
{
    if (base == NULL)
    {
        return kStatus_InvalidArgument;
    }

    /* tag can be NULL to skip tag processing */
    if (((ivSize != 0U) && (iv == NULL)) || ((aadSize != 0U) && (aad == NULL)) ||
        ((inputSize != 0U) && ((src == NULL) || (dst == NULL))))
    {
        return kStatus_InvalidArgument;
    }

    /* octet length of tag (tagSize) must be element of 4,8,12,13,14,15,16 */
    if (((tagSize > 16u) || (tagSize < 12u)) && (tagSize != 4u) && (tagSize != 8u))
    {
        return kStatus_InvalidArgument;
    }

    /* no IV AAD DATA makes no sense */
    if (0U == (inputSize + ivSize + aadSize))
    {
        return kStatus_InvalidArgument;
    }

    /* check length of input strings. This is more strict than the GCM specificaiton due to 32-bit architecture.
     * The API interface would work on 64-bit architecture as well, but as it has not been tested, let it limit to
     * 32-bits.
     */
    if (!((ivSize >= 1u) && (sizeof(size_t) <= 4u)))
    {
        return kStatus_InvalidArgument;
    }

    return kStatus_Success;
}

static const uint32_t templateAesGcm[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x02000000u, /* KEY */
    /* 02 */ 0x00000000u, /* place: key address */

    /* 03 */ 0x82100908u, /* OPERATION: AES GCM Decrypt Finalize */

    /* 04 */ 0x12830004u, /* LOAD Class 1 ICV Size Register by IMM data */
    /* 05 */ 0x00000000u, /* place: received ICV size */

    /* 06 */ 0x22210000u, /* FIFO LOAD IV (flush) */
    /* 07 */ 0x00000000u, /* place: IV address */

    /* 08 */ 0x22310000u, /* FIFO LOAD AAD (flush) */
    /* 09 */ 0x00000000u, /* place: AAD address */

    /* 10 */ 0x22530000u, /* FIFO LOAD message */
    /* 11 */ 0x00000000u, /* place: message address */
    /* 12 */ 0x00000000u, /* place: message size */

    /* 13 */ 0x60700000u, /* FIFO STORE Message */
    /* 14 */ 0x00000000u, /* place: destination address */
    /* 15 */ 0x00000000u, /* place: destination size */

    /* 16 */ 0xA3001201u, /* JMP always to next command. Load/store checkpoint. Class 1 done checkpoint. */

    /* For encryption, write the computed and encrypted MAC to user buffer */
    /* For decryption, compare the computed tag with the received tag, CICV-only job. */
    /* 17 */ 0x10880004u, /* LOAD Immediate to Clear Written Register. */
    /* 18 */ 0x08000004u, /* value for Clear Written Register: C1D and C1DS bits are set */
    /* 19 */ 0x12820004u, /* LOAD Immediate to C1DS Register. */
    /* 20 */ 0x00000000u, /* zero data size */
    /* 21 */ 0x12830004u, /* LOAD Class 1 ICV Size Register by IMM data */
    /* 22 */ 0x00000000u, /* place: received ICV size */
    /* 23 */ 0x82100902u, /* OPERATION: AES GCM Decrypt Update ICV_TEST */
    /* 24 */ 0x223B0000u, /* FIFO LOAD ICV */
    /* 25 */ 0x00000000u, /* place: received ICV address */
};

status_t caam_aes_gcm_non_blocking(CAAM_Type *base,
                                   caam_handle_t *handle,
                                   caam_desc_aes_gcm_t descriptor,
                                   const uint8_t *input,
                                   uint8_t *output,
                                   size_t size,
                                   const uint8_t *iv,
                                   size_t ivSize,
                                   const uint8_t *aad,
                                   size_t aadSize,
                                   const uint8_t *key,
                                   size_t keySize,
                                   uint32_t tag,
                                   size_t tagSize,
                                   int encrypt);

status_t caam_aes_gcm_non_blocking(CAAM_Type *base,
                                   caam_handle_t *handle,
                                   caam_desc_aes_gcm_t descriptor,
                                   const uint8_t *input,
                                   uint8_t *output,
                                   size_t size,
                                   const uint8_t *iv,
                                   size_t ivSize,
                                   const uint8_t *aad,
                                   size_t aadSize,
                                   const uint8_t *key,
                                   size_t keySize,
                                   uint32_t tag,
                                   size_t tagSize,
                                   int encrypt)
{
    BUILD_ASSURE(sizeof(templateAesGcm) <= sizeof(caam_desc_aes_gcm_t), caam_desc_aes_gcm_t_size);
    status_t status;

    status = caam_aes_gcm_check_input_args(base, input, iv, aad, output, size, ivSize, aadSize, tagSize);
    if (status != kStatus_Success)
    {
        return status;
    }

    /* get template descriptor and it's size */
    uint32_t descriptorSize = ARRAY_SIZE(templateAesGcm);
    (void)caam_memcpy(descriptor, templateAesGcm, sizeof(templateAesGcm));

    /* add descriptor size */
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);

    /* key address and key size */
    descriptor[1] |= (keySize & DESC_KEY_SIZE_MASK);
    descriptor[2] = ADD_OFFSET((uint32_t)key);

    /* Encrypt decrypt */
    if (0 != encrypt)
    {
        descriptor[3] |= 1u; /* ENC */
    }

    /* ICV Size */
    descriptor[5] = tagSize;

    bool ivLast  = (aadSize == 0U) && (size == 0U);
    bool aadLast = (size == 0U);

    /* IV address and size */
    descriptor[6] |= (ivSize & DESC_PAYLOAD_SIZE_MASK);
    descriptor[7] = ADD_OFFSET((uint32_t)iv);
    if (ivLast)
    {
        descriptor[6] |= DESC_LC1_MASK; /* LC1 */
    }

    /* AAD address and size */
    descriptor[8] |= (aadSize & DESC_PAYLOAD_SIZE_MASK);
    descriptor[9] = ADD_OFFSET((uint32_t)aad);
    if ((!ivLast) && aadLast)
    {
        descriptor[8] |= DESC_LC1_MASK; /* LC1 */
    }

    /* Message source address and size */
    descriptor[11] = ADD_OFFSET((uint32_t)input);
    descriptor[12] = size;

    /* Message destination address and size */
    descriptor[14] = ADD_OFFSET((uint32_t)output);
    descriptor[15] = size;

    if (tag != 0U)
    {
        if (encrypt == 0)
        {
            descriptor[22] = tagSize;
            descriptor[24] |= (tagSize & DESC_TAG_SIZE_MASK);
            descriptor[25] = ADD_OFFSET((uint32_t)tag);
        }
        else
        {
            /* For encryption change the command to FIFO STORE, as tag data needs to be put into tag output */
            descriptor[16] = 0x52200000u | (tagSize & DESC_TAG_SIZE_MASK); /* STORE from Class 1 context to tag */
            descriptor[17] = ADD_OFFSET((uint32_t)tag);                    /* place: tag address */
            ;
            descriptor[18] = DESC_HALT; /* always halt with status 0x0 (normal) */
        }
    }
    else
    {
        /* tag is NULL, skip tag processing */
        descriptor[16] = DESC_HALT; /* always halt with status 0x0 (normal) */
    }

    /* add operation specified by descriptor to CAAM Job Ring */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

static status_t caam_aes_ccm_check_input_args(CAAM_Type *base,
                                              const uint8_t *src,
                                              const uint8_t *iv,
                                              const uint8_t *key,
                                              uint8_t *dst,
                                              size_t ivSize,
                                              size_t aadSize,
                                              size_t keySize,
                                              size_t tagSize)
{
    if (base == NULL)
    {
        return kStatus_InvalidArgument;
    }

    /* tag can be NULL to skip tag processing */
    if ((src == NULL) || (iv == NULL) || (key == NULL) || (dst == NULL))
    {
        return kStatus_InvalidArgument;
    }

    /* size of Nonce (ivSize) must be element of 7,8,9,10,11,12,13 */
    if ((ivSize < 7u) || (ivSize > 13u))
    {
        return kStatus_InvalidArgument;
    }
    /* octet length of MAC (tagSize) must be element of 4,6,8,10,12,14,16 for tag processing or zero to skip tag
     * processing */
    if (((tagSize > 0U) && (tagSize < 4u)) || (tagSize > 16u) || ((tagSize & 1u) != 0U))
    {
        return kStatus_InvalidArgument;
    }

    /* check if keySize is supported */
    if (!caam_check_key_size(keySize))
    {
        return kStatus_InvalidArgument;
    }

    /* AESA does not support more AAD than this */
    if (aadSize >= 65280u)
    {
        return kStatus_InvalidArgument;
    }
    return kStatus_Success;
}

static void caam_aes_ccm_context_init(
    uint32_t inputSize, const uint8_t *iv, uint32_t ivSize, uint32_t aadSize, uint32_t tagSize, void *b0, void *ctr0)
{
    caam_xcm_block_t blk;
    caam_xcm_block_t blkZero = {{0x0u, 0x0u, 0x0u, 0x0u}};

    uint8_t q; /* octet length of binary representation of the octet length of the payload. computed as (15 - n), where
              n is length of nonce(=ivSize) */
    uint8_t flags_field; /* flags field in B0 and CTR0 */

    /* compute B0 */
    (void)caam_memcpy(&blk, &blkZero, sizeof(blk));
    /* tagSize - size of output MAC */
    q           = 15U - (uint8_t)ivSize;
    flags_field = (uint8_t)(8U * ((tagSize - 2U) / 2U) + q - 1U); /* 8*M' + L' */
    if (aadSize != 0U)
    {
        flags_field |= 0x40U; /* Adata */
    }
    blk.b[0] = flags_field;                   /* flags field */
    blk.w[3] = swap_bytes(inputSize);         /* message size, most significant byte first */
    (void)caam_memcpy(&blk.b[1], iv, ivSize); /* nonce field */

    /* Write B0 data to the context register.
     */
    (void)caam_memcpy(b0, (void *)&blk.b[0], 16);

    /* Write CTR0 to the context register.
     */
    (void)caam_memcpy(&blk, &blkZero, sizeof(blk)); /* ctr(0) field = zero */
    blk.b[0] = q - 1U;                              /* flags field */
    (void)caam_memcpy(&blk.b[1], iv, ivSize);       /* nonce field */
    (void)caam_memcpy(ctr0, (void *)&blk.b[0], 16);
}

static const uint32_t templateAesCcm[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x02000000u, /* KEY */
    /* 02 */ 0x00000000u, /* place: key address */

    /* 03 */ 0x12A00010u, /* LOAD 16 immediate bytes of B0 to Class 1 Context Register. Offset 0 bytes. */
    /* 04 */ 0x00000000u, /* place: B0[0-3] */
    /* 05 */ 0x00000000u, /* place: B0[4-7] */
    /* 06 */ 0x00000000u, /* place: B0[8-11] */
    /* 07 */ 0x00000000u, /* place: B0[12-15] */

    /* 08 */ 0x12A01010u, /* LOAD 16 immediate bytes of CTR0 to Class 1 Context Register. Offset 16 bytes. */
    /* 09 */ 0x00000000u, /* place: CTR0[0-3] */
    /* 10 */ 0x00000000u, /* place: CTR0[4-7] */
    /* 11 */ 0x00000000u, /* place: CTR0[8-11] */
    /* 12 */ 0x00000000u, /* place: CTR0[12-15] */

    /* 13 */ 0x8210080Cu, /* OPERATION: AES CCM Decrypt Initialize/Finalize */

    /* 14 */ 0x22B00004u, /* FIFO LOAD additional authentication data. Immediate 32-bit word with aadSize encoded */
    /* 15 */ 0x00000000u, /* place: encoded aadSize followed by first byte(s) of authentication data */
    /* 16 */ 0x22310000u, /* FIFO LOAD additional authentication data. Flush as this is last data of AAD type. */
    /* 17 */ 0x00000000u, /* place: AAD address */

    /* 18 */ 0x22530000u, /* FIFO LOAD message */
    /* 19 */ 0x00000000u, /* place: message address */
    /* 20 */ 0x00000000u, /* place: message size */

    /* 21 */ 0x60700000u, /* FIFO STORE Message */
    /* 22 */ 0x00000000u, /* place: destination address */
    /* 23 */ 0x00000000u, /* place: destination size */

    /* For encryption, write the computed and encrypted MAC to user buffer */
    /* 24 */ 0x52202000u, /* STORE from Class 1 context to tag */
    /* 25 */ 0x00000000u, /* place: tag address */

    /* For decryption, compare the computed tag with the received tag */

};

status_t caam_aes_ccm_non_blocking(CAAM_Type *base,
                                   caam_handle_t *handle,
                                   caam_desc_aes_ccm_t descriptor,
                                   const uint8_t *input,
                                   uint8_t *output,
                                   size_t size,
                                   const uint8_t *iv,
                                   size_t ivSize,
                                   const uint8_t *aad,
                                   size_t aadSize,
                                   const uint8_t *key,
                                   size_t keySize,
                                   uint32_t tag,
                                   size_t tagSize,
                                   int encrypt);

status_t caam_aes_ccm_non_blocking(CAAM_Type *base,
                                   caam_handle_t *handle,
                                   caam_desc_aes_ccm_t descriptor,
                                   const uint8_t *input,
                                   uint8_t *output,
                                   size_t size,
                                   const uint8_t *iv,
                                   size_t ivSize,
                                   const uint8_t *aad,
                                   size_t aadSize,
                                   const uint8_t *key,
                                   size_t keySize,
                                   uint32_t tag,
                                   size_t tagSize,
                                   int encrypt)
{
    BUILD_ASSURE(sizeof(templateAesCcm) <= sizeof(caam_desc_aes_ccm_t), caam_desc_aes_ccm_t_size);
    status_t status;

    /* get template descriptor and it's size */
    uint32_t descriptorSize = ARRAY_SIZE(templateAesCcm);
    (void)caam_memcpy(descriptor, templateAesCcm, sizeof(templateAesCcm));

    status = caam_aes_ccm_check_input_args(base, input, iv, key, output, ivSize, aadSize, keySize, tagSize);
    if (status != kStatus_Success)
    {
        return status;
    }

    /* add descriptor size */
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);

    /* key address and key size */
    descriptor[1] |= (keySize & DESC_KEY_SIZE_MASK);
    descriptor[2] = ADD_OFFSET((uint32_t)key);

    /* B0 and CTR0 */
    caam_aes_ccm_context_init(size, iv, ivSize, aadSize, tagSize, &descriptor[4], &descriptor[9]);

    /* Encrypt decrypt */
    if (encrypt != 0)
    {
        descriptor[13] |= 1u; /* ENC */
    }
    else if (tag != 0U)
    {
        /* If we decrypt message with tag, then desc[18] is not last FIFO LOAD because FIFO LOAD is used for TAG */
        /* So desc[18] is changed from 0x22530000u to 0x22510000u*/
        descriptor[18] = 0x22510000u;
        descriptor[13] |= 2u; /* ICV_TEST */
    }
    else
    {
        /* decrypt with tag NULL (skip tag processing). nothing needs to be changed in descriptor[13] for this case */
    }

    /* AAD address and size */
    /* encoding is two octets, msbyte first */
    if (aadSize != 0U)
    {
        uint32_t swapped = swap_bytes(aadSize);
        uint32_t sz;
        (void)caam_memcpy(&descriptor[15], (uint32_t *)(uintptr_t)(((uint8_t *)&swapped) + sizeof(uint16_t)),
                          sizeof(uint16_t));
        sz = aadSize > 2u ? 2u : aadSize;                             /* limit aad to the end of 16 bytes blk */
        (void)caam_memcpy(((uint8_t *)&descriptor[15]) + 2, aad, sz); /* fill B1 with aad */
        /* track consumed AAD. sz bytes have been moved to fifo. */
        aadSize -= sz;
        aad += sz;

        if (aadSize == 0U)
        {
            /* in case aadSize is 1 or 2, we add Flush bit to the command and skip FIFO LOAD AAD */
            descriptor[14] |= 0x00010000U; /* Flush (last AAD data) */
            descriptor[16] = DESC_JUMP_2;  /* jump to current index + 2 (=18) */
        }
        else
        {
            descriptor[16] |= (aadSize & DESC_PAYLOAD_SIZE_MASK);
            descriptor[17] = ADD_OFFSET((uint32_t)aad);
        }
    }
    else
    {
        /* no AAD, jump directly to message */
        descriptor[14] = DESC_JUMP_4; /* jump to current index + 4 (=18) */
    }

    /* Message source address and size */
    descriptor[19] = ADD_OFFSET((uint32_t)input);
    descriptor[20] = size;

    /* Message destination address and size */
    descriptor[22] = ADD_OFFSET((uint32_t)output);
    descriptor[23] = size;

    if (tag != 0U)
    {
        /* For decryption change the command to FIFO LOAD, as tag data needs to be put into input FIFO */
        if (encrypt == 0)
        {
            /* FIFO LOAD ICV */
            descriptor[24] = 0x223B0000u;
        }
        descriptor[24] |= (tagSize & DESC_TAG_SIZE_MASK);
        descriptor[25] = ADD_OFFSET((uint32_t)tag);
    }
    else
    {
        /* tag is NULL, skip tag processing */
        descriptor[24] = DESC_HALT; /* always halt with status 0x0 (normal) */
    }

    /* add operation specified by descriptor to CAAM Job Ring */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts AES and tags using CCM block mode.
 *
 * Puts AES CCM encrypt and tag descriptor to CAAM input job ring.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param plaintext Input plain text to encrypt
 * param[out] ciphertext Output cipher text.
 * param size Size of input and output data in bytes. Zero means authentication only.
 * param iv Nonce
 * param ivSize Length of the Nonce in bytes. Must be 7, 8, 9, 10, 11, 12, or 13.
 * param aad Input additional authentication data. Can be NULL if aadSize is zero.
 * param aadSize Input size in bytes of AAD. Zero means data mode only (authentication skipped).
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param[out] tag Generated output tag. Set to NULL to skip tag processing.
 * param tagSize Input size of the tag to generate, in bytes. Must be 4, 6, 8, 10, 12, 14, or 16.
 * return Status from job descriptor push
 */
status_t CAAM_AES_EncryptTagCcmNonBlocking(CAAM_Type *base,
                                           caam_handle_t *handle,
                                           caam_desc_aes_ccm_t descriptor,
                                           const uint8_t *plaintext,
                                           uint8_t *ciphertext,
                                           size_t size,
                                           const uint8_t *iv,
                                           size_t ivSize,
                                           const uint8_t *aad,
                                           size_t aadSize,
                                           const uint8_t *key,
                                           size_t keySize,
                                           uint8_t *tag,
                                           size_t tagSize)
{
    return caam_aes_ccm_non_blocking(base, handle, descriptor, plaintext, ciphertext, size, iv, ivSize, aad, aadSize,
                                     key, keySize, (uint32_t)tag, tagSize, 1);
}

/*!
 * brief Decrypts AES and authenticates using CCM block mode.
 *
 * Puts AES CCM decrypt and check tag descriptor to CAAM input job ring.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param ciphertext Input cipher text to decrypt
 * param[out] plaintext Output plain text.
 * param size Size of input and output data in bytes. Zero means authentication data only.
 * param iv Nonce
 * param ivSize Length of the Nonce in bytes. Must be 7, 8, 9, 10, 11, 12, or 13.
 * param aad Input additional authentication data. Can be NULL if aadSize is zero.
 * param aadSize Input size in bytes of AAD. Zero means data mode only (authentication data skipped).
 * param key Input key to use for decryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param tag Received tag. Set to NULL to skip tag processing.
 * param tagSize Input size of the received tag to compare with the computed tag, in bytes. Must be 4, 6, 8, 10, 12,
 *                14, or 16.
 * return Status from job descriptor push
 */

status_t CAAM_AES_DecryptTagCcmNonBlocking(CAAM_Type *base,
                                           caam_handle_t *handle,
                                           caam_desc_aes_ccm_t descriptor,
                                           const uint8_t *ciphertext,
                                           uint8_t *plaintext,
                                           size_t size,
                                           const uint8_t *iv,
                                           size_t ivSize,
                                           const uint8_t *aad,
                                           size_t aadSize,
                                           const uint8_t *key,
                                           size_t keySize,
                                           const uint8_t *tag,
                                           size_t tagSize)
{
    return caam_aes_ccm_non_blocking(base, handle, descriptor, ciphertext, plaintext, size, iv, ivSize, aad, aadSize,
                                     key, keySize, (uint32_t)tag, tagSize, 0);
}

static const uint32_t templateAesCtr[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x02000000u, /* KEY */
    /* 02 */ 0x00000000u, /* place: key address */
    /* 03 */ 0x12201010u, /* LOAD 16 bytes of CTR0 to Class 1 Context Register. Offset 16 bytes. */
    /* 04 */ 0x00000000u, /* place: CTR0 address */

    /* 05 */ 0x82100000u, /* OPERATION: AES CTR (de)crypt in Update mode */
    /* 06 */ 0x22530000u, /* FIFO LOAD Message */
    /* 07 */ 0x00000000u, /* place: source address */
    /* 08 */ 0x00000000u, /* place: source size */
    /* 09 */ 0x60700000u, /* FIFO STORE Message */
    /* 10 */ 0x00000000u, /* place: destination address */
    /* 11 */ 0x00000000u, /* place: destination size */

    /* 12 */ 0xA2000001u, /* JMP always to next command. Done checkpoint (wait for Class 1 Done) */
    /* 13 */ 0x10880004u, /* LOAD Immediate to Clear Written Register. */
    /* 14 */ 0x08000004u, /* value for Clear Written Register: C1D and C1DS bits are set */
    /* 15 */ 0x22930010u, /* FIFO LOAD Message Immediate 16 bytes */
    /* 16 */ 0x00000000u, /* all zeroes 0-3 */

    /* 17 */ 0x00000000u, /* all zeroes 4-7 */
    /* 18 */ 0x00000000u, /* all zeroes 8-11 */
    /* 19 */ 0x00000000u, /* all zeroes 12-15 */
    /* 20 */ 0x60300010u, /* FIFO STORE Message 16 bytes */
    /* 21 */ 0x00000000u, /* place: counterlast[] block address */

    /* 22 */ 0x82100000u, /* OPERATION: AES CTR (de)crypt in Update mode */
    /* 23 */ 0x52201010u, /* STORE 16 bytes of CTRi from Class 1 Context Register offset 16 bytes. */
    /* 24 */ 0x00000000u, /* place: CTRi address */
};

/*!
 * brief Encrypts or decrypts AES using CTR block mode.
 *
 * Encrypts or decrypts AES using CTR block mode.
 * AES CTR mode uses only forward AES cipher and same algorithm for encryption and decryption.
 * The only difference between encryption and decryption is that, for encryption, the input argument
 * is plain text and the output argument is cipher text. For decryption, the input argument is cipher text
 * and the output argument is plain text.
 *
 * Puts AES CTR crypt descriptor to CAAM input job ring.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param input Input data for CTR block mode
 * param[out] output Output data for CTR block mode
 * param size Size of input and output data in bytes
 * param[in,out] counter Input counter (updates on return)
 * param key Input key to use for forward AES cipher
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param[out] counterlast Output cipher of last counter, for chained CTR calls. NULL can be passed if chained calls are
 * not used.
 * param[out] szLeft Output number of bytes in left unused in counterlast block. NULL can be passed if chained calls
 * are not used.
 * return Status from job descriptor push
 */
status_t CAAM_AES_CryptCtrNonBlocking(CAAM_Type *base,
                                      caam_handle_t *handle,
                                      caam_desc_aes_ctr_t descriptor,
                                      const uint8_t *input,
                                      uint8_t *output,
                                      size_t size,
                                      uint8_t *counter,
                                      const uint8_t *key,
                                      size_t keySize,
                                      uint8_t *counterlast,
                                      size_t *szLeft)
{
    BUILD_ASSURE(sizeof(templateAesCtr) <= sizeof(caam_desc_aes_ctr_t), caam_desc_aes_ctr_t_size);
    uint32_t descriptorSize;

    if (!caam_check_key_size(keySize))
    {
        return kStatus_InvalidArgument;
    }

    /* get template descriptor and it's size */
    descriptorSize = ARRAY_SIZE(templateAesCtr);
    (void)caam_memcpy(descriptor, templateAesCtr, sizeof(templateAesCtr));

    /* add descriptor size */
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);

    /* key address and key size */
    descriptor[1] |= (keySize & DESC_KEY_SIZE_MASK);
    descriptor[2] = ADD_OFFSET((uint32_t)key);

    /* descriptor[3] configures 16 bytes length for CTR0 in templateAesCtr */
    descriptor[4] = ADD_OFFSET((uint32_t)counter);

    /* source address and size */
    descriptor[7] = ADD_OFFSET((uint32_t)input);
    descriptor[8] = size;

    /* destination address and size */
    descriptor[10] = ADD_OFFSET((uint32_t)output);
    descriptor[11] = size;

    /* AES CTR Crypt OPERATION in descriptor[5]
     * Algorithm State (AS) in template is Update (0h)
     * Only in case we are chaining the AES CTR calls (counterlast[] != NULL),
     * we have to change the algorithm state to Finalize (2h)
     * and so the CTRi for the last message block is not written to Class 1 Context.
     * This allows us to repeat AES CTR of the last CTRi, with destination to counterlast[],
     * and with using all zeroes in message data, the counterlast[] gets ECB of the last CTRi.
     */

    /* if counterlast or szLeft is NULL, the caller is not interested in AES of last counter
     * Thus, we can skip the counterlast processing
     * and only read the last CTRi from context.
     * So, we replace descriptor[11] with a jump command to STORE
     */
    if ((counterlast == NULL) || (szLeft == NULL))
    {
        /*  To create an unconditional jump, use TEST TYPE = 00 (all specified conditions true) and
            clear all TEST CONDITION bits because the tested condition is considered to be true if
            no test condition bits are set. */
        descriptor[12] = 0xA000000Bu; /* jump to current index + 11 (=23) */
    }
    else
    {
        uint32_t lastSize;

        descriptor[5] |= 0x08u; /* finalize */
        descriptor[21] = ADD_OFFSET((uint32_t)counterlast);

        lastSize = size % 16u;
        if (lastSize != 0U)
        {
            *szLeft = 16u - lastSize;
        }
        else
        {
            *szLeft = 0;
            /* descriptor[12] = 0xA000000Bu; */ /* jump to current index + 11 (=23) */
        }
    }

    /* read last CTRi from AES back to caller */
    descriptor[24] = ADD_OFFSET((uint32_t)counter);

    /* add operation specified by descriptor to CAAM Job Ring */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

static const uint32_t templateAesEcb[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x02000000u, /* KEY */
    /* 02 */ 0x00000000u, /* place: key address */
    /* 03 */ 0x22530000u, /* FIFO LOAD Message with EXT size */
    /* 04 */ 0x00000000u, /* place: source address */
    /* 05 */ 0x00000000u, /* place: source size */
    /* 06 */ 0x60700000u, /* FIFO STORE Message with EXT size */
    /* 07 */ 0x00000000u, /* place: destination address */
    /* 08 */ 0x00000000u, /* place: destination size */
    /* 09 */ 0x82100200u, /* OPERATION: AES ECB Decrypt */
};

/*!
 * brief Encrypts AES using the ECB block mode.
 *
 * Puts AES ECB encrypt descriptor to CAAM input job ring.
 *
 * param base CAAM peripheral base address
 * param plaintext Input plain text to encrypt
 * param[out] descriptor Memory for the CAAM descriptor.
 * param[out] ciphertext Output cipher text
 * param size Size of input and output data in bytes. Must be multiple of 16 bytes.
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * return Status from job descriptor push
 */
status_t CAAM_AES_EncryptEcbNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_aes_ecb_t descriptor,
                                        const uint8_t *plaintext,
                                        uint8_t *ciphertext,
                                        size_t size,
                                        const uint8_t *key,
                                        size_t keySize)
{
    BUILD_ASSURE(sizeof(templateAesEcb) <= sizeof(caam_desc_aes_ecb_t), caam_desc_aes_ecb_t_size);
    uint32_t descriptorSize;

    if (!caam_check_key_size(keySize))
    {
        return kStatus_InvalidArgument;
    }
    /* ECB mode, size must be non-zero 16-byte multiple */
    if (0U != (size % 16u))
    {
        return kStatus_InvalidArgument;
    }

    descriptorSize = ARRAY_SIZE(templateAesEcb);
    (void)caam_memcpy(descriptor, templateAesEcb, sizeof(templateAesEcb));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= (keySize & DESC_KEY_SIZE_MASK);
    descriptor[2] = (uint32_t)ADD_OFFSET((uint32_t)key);
    /* descriptor[3] FIFO LOAD copied from template */
    descriptor[4] = (uint32_t)ADD_OFFSET((uint32_t)plaintext);
    descriptor[5] = size; /* FIFO LOAD EXT size */
                          /* descriptor[6] FIFO STORE copied from template */
    descriptor[7] = (uint32_t)ADD_OFFSET((uint32_t)ciphertext);
    descriptor[8] = size; /* FIFO STORE EXT size */
    descriptor[9] |= 1u;  /* add ENC bit to specify Encrypt OPERATION */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts AES using ECB block mode.
 *
 * Puts AES ECB decrypt descriptor to CAAM input job ring.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param ciphertext Input cipher text to decrypt
 * param[out] plaintext Output plain text
 * param size Size of input and output data in bytes. Must be multiple of 16 bytes.
 * param key Input key.
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * return Status from job descriptor push
 */
status_t CAAM_AES_DecryptEcbNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_aes_ecb_t descriptor,
                                        const uint8_t *ciphertext,
                                        uint8_t *plaintext,
                                        size_t size,
                                        const uint8_t *key,
                                        size_t keySize)
{
    uint32_t descriptorSize;

    if (!caam_check_key_size(keySize))
    {
        return kStatus_InvalidArgument;
    }
    /* ECB mode, size must be non-zero 16-byte multiple */
    if (0U != (size % 16u))
    {
        return kStatus_InvalidArgument;
    }

    descriptorSize = ARRAY_SIZE(templateAesEcb);
    (void)caam_memcpy(descriptor, templateAesEcb, sizeof(templateAesEcb));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= (keySize & DESC_KEY_SIZE_MASK);
    descriptor[2] = (uint32_t)ADD_OFFSET((uint32_t)key);
    /* descriptor[3] FIFO LOAD copied from template */
    descriptor[4] = (uint32_t)ADD_OFFSET((uint32_t)ciphertext);
    descriptor[5] = size;
    /* descriptor[6] FIFO STORE copied from template */
    descriptor[7] = (uint32_t)ADD_OFFSET((uint32_t)plaintext);
    descriptor[8] = size; /* FIFO STORE EXT size */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

static const uint32_t templateAesCbc[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x02000000u, /* KEY */
    /* 02 */ 0x00000000u, /* place: key address */
    /* 03 */ 0x12200010u, /* LOAD 16 bytes of iv to Class 1 Context Register */
    /* 04 */ 0x00000000u, /* place: iv address */
    /* 05 */ 0x22530000u, /* FIFO LOAD Message */
    /* 06 */ 0x00000000u, /* place: source address */
    /* 07 */ 0x00000000u, /* place: source size */
    /* 08 */ 0x60700000u, /* FIFO STORE Message */
    /* 09 */ 0x00000000u, /* place: destination address */
    /* 10 */ 0x00000000u, /* place: destination size */
    /* 11 */ 0x82100100u, /* OPERATION: AES CBC Decrypt */
};

/*!
 * brief Encrypts AES using CBC block mode.
 *
 * Puts AES CBC encrypt descriptor to CAAM input job ring.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param plaintext Input plain text to encrypt
 * param[out] ciphertext Output cipher text
 * param size Size of input and output data in bytes. Must be multiple of 16 bytes.
 * param iv Input initial vector to combine with the first input block.
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * return Status from job descriptor push
 */
status_t CAAM_AES_EncryptCbcNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_aes_cbc_t descriptor,
                                        const uint8_t *plaintext,
                                        uint8_t *ciphertext,
                                        size_t size,
                                        const uint8_t *iv,
                                        const uint8_t *key,
                                        size_t keySize)
{
    BUILD_ASSURE(sizeof(templateAesCbc) <= sizeof(caam_desc_aes_cbc_t), caam_desc_aes_cbc_t_size);
    uint32_t descriptorSize;

    if (!caam_check_key_size(keySize))
    {
        return kStatus_InvalidArgument;
    }

    /* CBC mode, size must be non-zero 16-byte multiple */
    if (0U != (size % 16u))
    {
        return kStatus_InvalidArgument;
    }

    /* get template descriptor and it's size */
    descriptorSize = ARRAY_SIZE(templateAesCbc);
    (void)caam_memcpy(descriptor, templateAesCbc, sizeof(templateAesCbc));

    /* add descriptor size */
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);

    /* key address and key size */
    descriptor[1] |= (keySize & DESC_KEY_SIZE_MASK);
    descriptor[2] = (uint32_t)ADD_OFFSET((uint32_t)key);

    /* descriptor[3] configures 16 bytes length for IV in templateAesCbc */
    descriptor[4] = (uint32_t)ADD_OFFSET((uint32_t)iv);

    /* source address and size */
    descriptor[6] = (uint32_t)ADD_OFFSET((uint32_t)plaintext);
    descriptor[7] = size;

    /* destination address and size */
    descriptor[9]  = (uint32_t)ADD_OFFSET((uint32_t)ciphertext);
    descriptor[10] = size;

    /* AES CBC */
    descriptor[11] |= 1u; /* add ENC bit to specify Encrypt OPERATION */

    /* add operation specified by descriptor to CAAM Job Ring */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts AES using CBC block mode.
 *
 * Puts AES CBC decrypt descriptor to CAAM input job ring.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param ciphertext Input cipher text to decrypt
 * param[out] plaintext Output plain text
 * param size Size of input and output data in bytes. Must be multiple of 16 bytes.
 * param iv Input initial vector to combine with the first input block.
 * param key Input key to use for decryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * return Status from job descriptor push
 */
status_t CAAM_AES_DecryptCbcNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_aes_cbc_t descriptor,
                                        const uint8_t *ciphertext,
                                        uint8_t *plaintext,
                                        size_t size,
                                        const uint8_t *iv,
                                        const uint8_t *key,
                                        size_t keySize)
{
    uint32_t descriptorSize;

    if (!caam_check_key_size(keySize))
    {
        return kStatus_InvalidArgument;
    }

    /* CBC mode, size must be non-zero 16-byte multiple */
    if (0U != (size % 16u))
    {
        return kStatus_InvalidArgument;
    }

    /* get template descriptor and it's size */
    descriptorSize = ARRAY_SIZE(templateAesCbc);
    (void)caam_memcpy(descriptor, templateAesCbc, sizeof(templateAesCbc));

    /* add descriptor size */
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);

    /* key address and key size */
    descriptor[1] |= (keySize & DESC_KEY_SIZE_MASK);
    descriptor[2] = ADD_OFFSET((uint32_t)key);

    /* descriptor[3] configures 16 bytes length for IV in templateAesCbc */
    descriptor[4] = ADD_OFFSET((uint32_t)iv);

    /* source address and size */
    descriptor[6] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[7] = size;

    /* destination address and size */
    descriptor[9]  = ADD_OFFSET((uint32_t)plaintext);
    descriptor[10] = size;

    /* AES CBC Decrypt OPERATION in descriptor[11] */

    /* add operation specified by descriptor to CAAM Job Ring */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts AES and tags using GCM block mode.
 *
 * Encrypts AES and optionally tags using GCM block mode. If plaintext is NULL, only the GHASH is calculated and output
 * in the 'tag' field.
 * Puts AES GCM encrypt and tag descriptor to CAAM input job ring.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param plaintext Input plain text to encrypt
 * param[out] ciphertext Output cipher text.
 * param size Size of input and output data in bytes
 * param iv Input initial vector
 * param ivSize Size of the IV
 * param aad Input additional authentication data
 * param aadSize Input size in bytes of AAD
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param[out] tag Output hash tag. Set to NULL to skip tag processing.
 * param tagSize Input size of the tag to generate, in bytes. Must be 4,8,12,13,14,15 or 16.
 * return Status from job descriptor push
 */
status_t CAAM_AES_EncryptTagGcmNonBlocking(CAAM_Type *base,
                                           caam_handle_t *handle,
                                           caam_desc_aes_gcm_t descriptor,
                                           const uint8_t *plaintext,
                                           uint8_t *ciphertext,
                                           size_t size,
                                           const uint8_t *iv,
                                           size_t ivSize,
                                           const uint8_t *aad,
                                           size_t aadSize,
                                           const uint8_t *key,
                                           size_t keySize,
                                           uint8_t *tag,
                                           size_t tagSize)
{
    return caam_aes_gcm_non_blocking(base, handle, descriptor, plaintext, ciphertext, size, iv, ivSize, aad, aadSize,
                                     key, keySize, (uint32_t)tag, tagSize, 1);
}

/*!
 * brief Decrypts AES and authenticates using GCM block mode.
 *
 * Decrypts AES and optionally authenticates using GCM block mode. If ciphertext is NULL, only the GHASH is calculated
 * and compared with the received GHASH in 'tag' field.
 * Puts AES GCM decrypt and check tag descriptor to CAAM input job ring.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param ciphertext Input cipher text to decrypt
 * param[out] plaintext Output plain text.
 * param size Size of input and output data in bytes
 * param iv Input initial vector
 * param ivSize Size of the IV
 * param aad Input additional authentication data
 * param aadSize Input size in bytes of AAD
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param tag Input hash tag to compare. Set to NULL to skip tag processing.
 * param tagSize Input size of the tag, in bytes. Must be 4, 8, 12, 13, 14, 15, or 16.
 * return Status from job descriptor push
 */
status_t CAAM_AES_DecryptTagGcmNonBlocking(CAAM_Type *base,
                                           caam_handle_t *handle,
                                           caam_desc_aes_gcm_t descriptor,
                                           const uint8_t *ciphertext,
                                           uint8_t *plaintext,
                                           size_t size,
                                           const uint8_t *iv,
                                           size_t ivSize,
                                           const uint8_t *aad,
                                           size_t aadSize,
                                           const uint8_t *key,
                                           size_t keySize,
                                           const uint8_t *tag,
                                           size_t tagSize)
{
    return caam_aes_gcm_non_blocking(base, handle, descriptor, ciphertext, plaintext, size, iv, ivSize, aad, aadSize,
                                     key, keySize, (uint32_t)tag, tagSize, 0);
}

/*!
 * brief Gets the default configuration structure.
 *
 * This function initializes the CAAM configuration structure to a default value. The default
 * values are as follows.
 *   caamConfig->rngSampleMode = kCAAM_RNG_SampleModeVonNeumann;
 *   caamConfig->rngRingOscDiv = kCAAM_RNG_RingOscDiv4;
 *
 * param[out] config Pointer to configuration structure.
 */
void CAAM_GetDefaultConfig(caam_config_t *config)
{
    /* Initializes the configure structure to zero. */
    (void)memset(config, 0, sizeof(*config));

    caam_config_t userConfig = {
        {NULL, NULL, NULL, NULL},   kCAAM_RNG_SampleModeVonNeumann, kCAAM_RNG_RingOscDiv4, true, true, true, true,
        kCAAM_NormalOperationBlobs,
    };

    *config = userConfig;
}

/*!
 * brief Initializes the CAAM driver.
 *
 * This function initializes the CAAM driver, including CAAM's internal RNG.
 * param base CAAM peripheral base address
 * param config Pointer to configuration structure.
 * return kStatus_Success the CAAM Init has completed with zero termination status word
 * return kStatus_Fail the CAAM Init has completed with non-zero termination status word
 */
status_t CAAM_Init(CAAM_Type *base, const caam_config_t *config)
{
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
    CLOCK_EnableClock(kCLOCK_Caam);
#endif
    status_t status = kStatus_Fail;

    base->MCFGR = 0x80000000u; /* reset */
    base->MCFGR = 0x90000000u; /* reset DMA */
    base->MCFGR = 0x00082300u; /* (reset value) */

    /* job ring interface 0 is mandatory */
    assert(config->jobRingInterface[0]);
    if (NULL == config->jobRingInterface[0])
    {
        return kStatus_Fail; /* return if user wishes to use the job ring but does not configure it. */
    }

    /* Job Rings Configuration
     * number of entries in both input and output ring is equal.
     * Note the size of an entry is different. an entry in the input ring is a 32-bit word.
     * an entry in the output ring is two 32-bit words. (descriptor pointer followed by termination status word)
     */
    s_jr0 = config->jobRingInterface[0];
    (void)memset(s_jr0, 0, sizeof(*s_jr0));
    s_jrIndex0 = 0;
    caam_job_ring_set_base_address_and_size(base, kCAAM_JobRing0, s_jr0->inputJobRing, ARRAY_SIZE(s_jr0->inputJobRing),
                                            s_jr0->outputJobRing, ARRAY_SIZE(s_jr0->outputJobRing) / 2U);

    if (config->jobRingInterface[1] != NULL)
    {
        s_jr1 = config->jobRingInterface[1];
        (void)memset(s_jr1, 0, sizeof(*s_jr1));
        s_jrIndex1 = 0;
        caam_job_ring_set_base_address_and_size(base, kCAAM_JobRing1, s_jr1->inputJobRing,
                                                ARRAY_SIZE(s_jr1->inputJobRing), s_jr1->outputJobRing,
                                                ARRAY_SIZE(s_jr1->outputJobRing) / 2U);
    }

    if (config->jobRingInterface[2] != NULL)
    {
        s_jr2 = config->jobRingInterface[2];
        (void)memset(s_jr2, 0, sizeof(*s_jr2));
        s_jrIndex2 = 0;
        caam_job_ring_set_base_address_and_size(base, kCAAM_JobRing2, s_jr2->inputJobRing,
                                                ARRAY_SIZE(s_jr2->inputJobRing), s_jr2->outputJobRing,
                                                ARRAY_SIZE(s_jr2->outputJobRing) / 2U);
    }

    if (config->jobRingInterface[3] != NULL)
    {
        s_jr3 = config->jobRingInterface[3];
        (void)memset(s_jr3, 0, sizeof(*s_jr3));
        s_jrIndex3 = 0;
        caam_job_ring_set_base_address_and_size(base, kCAAM_JobRing3, s_jr3->inputJobRing,
                                                ARRAY_SIZE(s_jr3->inputJobRing), s_jr3->outputJobRing,
                                                ARRAY_SIZE(s_jr3->outputJobRing) / 2U);
    }

    /*
     * Instantiate RNG in normal (non-deterministic) mode and load the JDKEK, TDKEK and TDSK registers
     * this step is required for example
     * for FIFO STORE command to be able to store Key register as Black key
     * for example during AES XCBC-MAC context switch (need to store derived key K1 to memory)
     */
    (void)CAAM_RNG_GetDefaultConfig(&rngConfig);

    /* reset RNG */
    base->RTMCTL = CAAM_RTMCTL_PRGM_MASK | CAAM_RTMCTL_ERR_MASK | CAAM_RTMCTL_RST_DEF_MASK |
                   CAAM_RTMCTL_SAMP_MODE(kCAAM_RNG_SampleModeRaw);
    base->RTMCTL = CAAM_RTMCTL_ERR_MASK | CAAM_RTMCTL_SAMP_MODE(config->rngSampleMode) |
                   CAAM_RTMCTL_OSC_DIV(config->rngRingOscDiv);

    caam_handle_t handle;
    handle.jobRing = kCAAM_JobRing0;

    /* Check if Instantiated State Handle 0 or 1 has been instantiated */
    if ((base->RDSTA & (CAAM_RDSTA_IF0_MASK | CAAM_RDSTA_IF1_MASK)) == 0U)
    {
        status = CAAM_RNG_Init(base, &handle, kCAAM_RngStateHandle0, &rngConfig);
        if (status != kStatus_Success)
        {
            return status;
        }
    }
    else
    {
        status = kStatus_Success;
    }

    /* Check if JDKEK, TDKEK and TDSK are already generated, generate if not */
    /* Note: second secure keys generate per one PoR will generate Secure Key error */
    if ((base->JDKEKR[0U] == 0U) && (base->TDKEKR[0U] == 0U) && (base->TDSKR[0U] == 0U))
    {
        /* Note: Secure key is cleared only during POR reset */
        status = CAAM_RNG_GenerateSecureKey(base, &handle, NULL);
        if (status != kStatus_Success)
        {
            return status;
        }
    }
    else
    {
        status = kStatus_Success;
    }

    /* set RANDDPAR bit for the AESA to reseed its DPA mask using data from kCAAM_RngStateHandle0 */
    /* also set other bits to 1 for security */
    base->SCFGR =
#if defined(FSL_FEATURE_CAAM_HAS_RANDDPAR) && (FSL_FEATURE_CAAM_HAS_RANDDPAR > 0)
        CAAM_SCFGR_RANDDPAR(config->scfgrRandomDpaResistance) |
#endif /* FSL_FEATURE_CAAM_HAS_RANDDPAR */
#if defined(FSL_FEATURE_CAAM_HAS_RDB) && (FSL_FEATURE_CAAM_HAS_RDB > 0)
        CAAM_SCFGR_RDB(config->scfgrEnableRandomDataBuffer) |
#endif /* FSL_FEATURE_CAAM_HAS_RDB */
        CAAM_SCFGR_LCK_TRNG(config->scfgrLockTrngProgramMode) | CAAM_SCFGR_RNGSH0(config->scfgrRandomRngStateHandle0) |
        CAAM_SCFGR_PRIBLOB(config->scfgrPriblob);

    return status;
}

/*!
 * brief Wait for a CAAM job to complete.
 *
 * This function polls CAAM output ring for a specific job.
 *
 * The CAAM job ring is specified by the jobRing field in the caam_handle_t structure.
 * The job to be waited is specified by it's descriptor address.
 *
 * This function has two modes, determined by the mode argument.
 * In blocking mode, the function polls the specified jobRing until the descriptor
 * is available in the CAAM output job ring.
 * In non-blocking mode, it polls the output ring once and returns status
 * immediately.
 *
 * The function can be called from multiple threads or interrupt service routines,
 * as internally it uses global critical section (global interrupt disable enable)
 * to protect it's operation against concurrent accesses.
 * The global interrupt is disabled only when the descriptor is found
 * in the output ring, for a very short time, to remove the descriptor from the output ring
 * safely.
 *
 * param base CAAM peripheral base address
 * param handle Data structure with CAAM jobRing used for this request
 * param descriptor
 * param mode Blocking and non-blocking mode. Zero is blocking. Non-zero is non-blocking.
 * return kStatus_Success the CAAM job has completed with zero job termination status word
 * return kStatus_Fail the CAAM job has completed with non-zero job termination status word
 * return kStatus_Again In non-blocking mode, the job is not ready in the CAAM Output Ring
 */
status_t CAAM_Wait(CAAM_Type *base, caam_handle_t *handle, uint32_t *descriptor, caam_wait_mode_t mode)
{
    /* poll output ring for the specified job descriptor */
    status_t status;
    bool wait;
    bool found;

    wait   = true;
    status = kStatus_Success;
    found  = false;

    while (wait)
    {
        /* any result available on this job ring? */
        if ((caam_output_ring_get_slots_full(base, handle->jobRing)) != 0U)
        {
            status = caam_out_job_ring_test_and_remove(base, handle->jobRing,
                                                       (uint32_t *)ADD_OFFSET((uint32_t)descriptor), &wait, &found);
        }

        /* non-blocking mode polls output ring once */
        if (mode == kCAAM_Nonblocking)
        {
            wait = false; /* exit the while() */
            if (!found)
            {
                status = kStatus_CAAM_Again; /* job not in the tested ring */
            }
        }
    }
    return status;
}

/*!
 * brief Deinitializes the CAAM driver.
 * This function deinitializes the CAAM driver.
 * param base CAAM peripheral base address
 * return kStatus_Success the CAAM Deinit has completed with zero termination status word
 * return kStatus_Fail the CAAM Deinit has completed with non-zero termination status word
 */
status_t CAAM_Deinit(CAAM_Type *base)
{
    caam_handle_t handle;
    handle.jobRing  = kCAAM_JobRing0;
    status_t status = kStatus_Fail;
    status          = CAAM_RNG_Deinit(base, &handle, kCAAM_RngStateHandle0);
    if (status != kStatus_Success)
    {
        return status;
    }

    base->JOBRING[0].JRCR_JR = CAAM_JRCR_JR_RESET_MASK;
    base->JOBRING[0].JRCR_JR = CAAM_JRCR_JR_RESET_MASK;
    base->JOBRING[1].JRCR_JR = CAAM_JRCR_JR_RESET_MASK;
    base->JOBRING[1].JRCR_JR = CAAM_JRCR_JR_RESET_MASK;
    base->DRR                = CAAM_DRR_RST0_MASK;
    base->MCFGR              = CAAM_MCFGR_SWRST_MASK;                           /* reset */
    base->MCFGR              = CAAM_MCFGR_SWRST_MASK | CAAM_MCFGR_DMA_RST_MASK; /* reset DMA */
    base->MCFGR              = 0x00082300u;                                     /* (reset value) */

    while (0U == (base->RTMCTL & CAAM_RTMCTL_TSTOP_OK_MASK))
    {
    }

    /* reset RNG */
    base->RTMCTL = CAAM_RTMCTL_PRGM_MASK | CAAM_RTMCTL_ERR_MASK | CAAM_RTMCTL_RST_DEF_MASK |
                   CAAM_RTMCTL_SAMP_MODE(kCAAM_RNG_SampleModeRaw);

#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
    CLOCK_DisableClock(kCLOCK_Caam);
#endif

    return status;
}

/*!
 * brief External Key Transfer.
 *
 * This function loads the given key source to an CAAM external destination via a private interface,
 * such as Inline Encryption Engine IEE Private Key bus.
 *
 * The CAAM job ring is specified by the jobRing field in the caam_handle_t structure.
 *
 * This function is blocking.
 *
 * param base CAAM peripheral base address
 * param handle Data structure with CAAM jobRing used for this request.
 * param keySource The source from which the key will be obtained.
 * param keySize Size of the key in bytes.
 * return kStatus_Success the CAAM job has completed with zero job termination status word
 * return kStatus_Fail the CAAM job has completed with non-zero job termination status word
 */
status_t CAAM_ExternalKeyTransfer(CAAM_Type *base,
                                  caam_handle_t *handle,
                                  caam_ext_key_xfr_source_t keySource,
                                  size_t keySize)
{
    caam_desc_aes_ecb_t descBuf = {0};
    status_t status;

    descBuf[0] = 0xB0800002u; /* HEADER */
    descBuf[1] = 0x40000000u; /* EXT KEY XFR command. */

    switch (keySource)
    {
        case kCAAM_ExtKeyXfr_KeyRegisterClass1:
        case kCAAM_ExtKeyXfr_KeyRegisterClass2:
        case kCAAM_ExtKeyXfr_PkhaRamE:
            descBuf[1] |= ((uint32_t)keySource << 16) | keySize;
            status = kStatus_Success;
            break;

        default:
            status = kStatus_InvalidArgument;
            break;
    }

    if (status != kStatus_Success)
    {
        return status;
    }

    /* schedule the job and block wait for result */
    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &descBuf[0]);
    } while (status != kStatus_Success);

    return CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
}

/*!
 * brief Encrypts AES using the ECB block mode.
 *
 * Encrypts AES using the ECB block mode.
 *
 * param base CAAM peripheral base address
 * param plaintext Input plain text to encrypt
 * param[out] ciphertext Output cipher text
 * param size Size of input and output data in bytes. Must be multiple of 16 bytes.
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * return Status from encrypt operation
 */
status_t CAAM_AES_EncryptEcb(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *plaintext,
                             uint8_t *ciphertext,
                             size_t size,
                             const uint8_t *key,
                             size_t keySize)
{
    caam_desc_aes_ecb_t descBuf;
    status_t status;

    do
    {
        status = CAAM_AES_EncryptEcbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, key, keySize);
    } while (status == kStatus_CAAM_Again);

    if (status != 0)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts AES using ECB block mode.
 *
 * Decrypts AES using ECB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input cipher text to decrypt
 * param[out] plaintext Output plain text
 * param size Size of input and output data in bytes. Must be multiple of 16 bytes.
 * param key Input key.
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * return Status from decrypt operation
 */
status_t CAAM_AES_DecryptEcb(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *ciphertext,
                             uint8_t *plaintext,
                             size_t size,
                             const uint8_t *key,
                             size_t keySize)
{
    caam_desc_aes_ecb_t descBuf;
    status_t status;

    do
    {
        status = CAAM_AES_DecryptEcbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, key, keySize);
    } while (status == kStatus_CAAM_Again);

    if (status != 0)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts AES using CBC block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plain text to encrypt
 * param[out] ciphertext Output cipher text
 * param size Size of input and output data in bytes. Must be multiple of 16 bytes.
 * param iv Input initial vector to combine with the first input block.
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * return Status from encrypt operation
 */
status_t CAAM_AES_EncryptCbc(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *plaintext,
                             uint8_t *ciphertext,
                             size_t size,
                             const uint8_t iv[16],
                             const uint8_t *key,
                             size_t keySize)
{
    caam_desc_aes_cbc_t descBuf;
    status_t status;

    do
    {
        status = CAAM_AES_EncryptCbcNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key, keySize);
    } while (status == kStatus_CAAM_Again);

    if (status != 0)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts AES using CBC block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input cipher text to decrypt
 * param[out] plaintext Output plain text
 * param size Size of input and output data in bytes. Must be multiple of 16 bytes.
 * param iv Input initial vector to combine with the first input block.
 * param key Input key to use for decryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * return Status from decrypt operation
 */
status_t CAAM_AES_DecryptCbc(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *ciphertext,
                             uint8_t *plaintext,
                             size_t size,
                             const uint8_t iv[16],
                             const uint8_t *key,
                             size_t keySize)
{
    caam_desc_aes_cbc_t descBuf;
    status_t status;

    do
    {
        status = CAAM_AES_DecryptCbcNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key, keySize);
    } while (status == kStatus_CAAM_Again);

    if (status != 0)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts or decrypts AES using CTR block mode.
 *
 * Encrypts or decrypts AES using CTR block mode.
 * AES CTR mode uses only forward AES cipher and same algorithm for encryption and decryption.
 * The only difference between encryption and decryption is that, for encryption, the input argument
 * is plain text and the output argument is cipher text. For decryption, the input argument is cipher text
 * and the output argument is plain text.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param input Input data for CTR block mode
 * param[out] output Output data for CTR block mode
 * param size Size of input and output data in bytes
 * param[in,out] counter Input counter (updates on return)
 * param key Input key to use for forward AES cipher
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param[out] counterlast Output cipher of last counter, for chained CTR calls. NULL can be passed if chained calls are
 * not used.
 * param[out] szLeft Output number of bytes in left unused in counterlast block. NULL can be passed if chained calls
 * are not used.
 * return Status from encrypt operation
 */
status_t CAAM_AES_CryptCtr(CAAM_Type *base,
                           caam_handle_t *handle,
                           const uint8_t *input,
                           uint8_t *output,
                           size_t size,
                           uint8_t counter[16],
                           const uint8_t *key,
                           size_t keySize,
                           uint8_t counterlast[16],
                           size_t *szLeft)
{
    caam_desc_aes_ctr_t descBuf;
    status_t status;

    do
    {
        status = CAAM_AES_CryptCtrNonBlocking(base, handle, descBuf, input, output, size, counter, key, keySize,
                                              counterlast, szLeft);
    } while (status == kStatus_CAAM_Again);

    if (status != 0)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)output, size);
    DCACHE_InvalidateByRange((uint32_t)counter, 16u);
    DCACHE_InvalidateByRange((uint32_t)szLeft, sizeof(szLeft));
    if (counterlast != NULL)
    {
        DCACHE_InvalidateByRange((uint32_t)counterlast, 16u);
    }
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts AES and tags using CCM block mode.
 *
 * Encrypts AES and optionally tags using CCM block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plain text to encrypt
 * param[out] ciphertext Output cipher text.
 * param size Size of input and output data in bytes. Zero means authentication only.
 * param iv Nonce
 * param ivSize Length of the Nonce in bytes. Must be 7, 8, 9, 10, 11, 12, or 13.
 * param aad Input additional authentication data. Can be NULL if aadSize is zero.
 * param aadSize Input size in bytes of AAD. Zero means data mode only (authentication skipped).
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param[out] tag Generated output tag. Set to NULL to skip tag processing.
 * param tagSize Input size of the tag to generate, in bytes. Must be 4, 6, 8, 10, 12, 14, or 16.
 * return Status from encrypt operation
 */
status_t CAAM_AES_EncryptTagCcm(CAAM_Type *base,
                                caam_handle_t *handle,
                                const uint8_t *plaintext,
                                uint8_t *ciphertext,
                                size_t size,
                                const uint8_t *iv,
                                size_t ivSize,
                                const uint8_t *aad,
                                size_t aadSize,
                                const uint8_t *key,
                                size_t keySize,
                                uint8_t *tag,
                                size_t tagSize)
{
    caam_desc_aes_ccm_t descBuf;
    status_t status;

    do
    {
        status = CAAM_AES_EncryptTagCcmNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, ivSize, aad,
                                                   aadSize, key, keySize, tag, tagSize);
    } while (status == kStatus_CAAM_Again);

    if (status != 0)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);

#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
    DCACHE_InvalidateByRange((uint32_t)tag, tagSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts AES and authenticates using CCM block mode.
 *
 * Decrypts AES and optionally authenticates using CCM block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input cipher text to decrypt
 * param[out] plaintext Output plain text.
 * param size Size of input and output data in bytes. Zero means authentication data only.
 * param iv Nonce
 * param ivSize Length of the Nonce in bytes. Must be 7, 8, 9, 10, 11, 12, or 13.
 * param aad Input additional authentication data. Can be NULL if aadSize is zero.
 * param aadSize Input size in bytes of AAD. Zero means data mode only (authentication data skipped).
 * param key Input key to use for decryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param tag Received tag. Set to NULL to skip tag processing.
 * param tagSize Input size of the received tag to compare with the computed tag, in bytes. Must be 4, 6, 8, 10, 12,
 *                14, or 16.
 * return Status from decrypt operation
 */
status_t CAAM_AES_DecryptTagCcm(CAAM_Type *base,
                                caam_handle_t *handle,
                                const uint8_t *ciphertext,
                                uint8_t *plaintext,
                                size_t size,
                                const uint8_t *iv,
                                size_t ivSize,
                                const uint8_t *aad,
                                size_t aadSize,
                                const uint8_t *key,
                                size_t keySize,
                                const uint8_t *tag,
                                size_t tagSize)
{
    caam_desc_aes_ccm_t descBuf;
    status_t status;

    do
    {
        status = CAAM_AES_DecryptTagCcmNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, ivSize, aad,
                                                   aadSize, key, keySize, tag, tagSize);
    } while (status == kStatus_CAAM_Again);

    if (status != 0)
    {
        return status;
    }
    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts AES and tags using GCM block mode.
 *
 * Encrypts AES and optionally tags using GCM block mode. If plaintext is NULL, only the GHASH is calculated and output
 * in the 'tag' field.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plain text to encrypt
 * param[out] ciphertext Output cipher text.
 * param size Size of input and output data in bytes
 * param iv Input initial vector
 * param ivSize Size of the IV
 * param aad Input additional authentication data
 * param aadSize Input size in bytes of AAD
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param[out] tag Output hash tag. Set to NULL to skip tag processing.
 * param tagSize Input size of the tag to generate, in bytes. Must be 4,8,12,13,14,15 or 16.
 * return Status from encrypt operation
 */
status_t CAAM_AES_EncryptTagGcm(CAAM_Type *base,
                                caam_handle_t *handle,
                                const uint8_t *plaintext,
                                uint8_t *ciphertext,
                                size_t size,
                                const uint8_t *iv,
                                size_t ivSize,
                                const uint8_t *aad,
                                size_t aadSize,
                                const uint8_t *key,
                                size_t keySize,
                                uint8_t *tag,
                                size_t tagSize)
{
    caam_desc_aes_gcm_t descBuf;
    status_t status;

    do
    {
        status = CAAM_AES_EncryptTagGcmNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, ivSize, aad,
                                                   aadSize, key, keySize, tag, tagSize);
    } while (status == kStatus_CAAM_Again);

    if (status != 0)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);

#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
    if (tag != NULL)
    {
        DCACHE_InvalidateByRange((uint32_t)tag, tagSize);
    }
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts AES and authenticates using GCM block mode.
 *
 * Decrypts AES and optionally authenticates using GCM block mode. If ciphertext is NULL, only the GHASH is calculated
 * and compared with the received GHASH in 'tag' field.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input cipher text to decrypt
 * param[out] plaintext Output plain text.
 * param size Size of input and output data in bytes
 * param iv Input initial vector
 * param ivSize Size of the IV
 * param aad Input additional authentication data
 * param aadSize Input size in bytes of AAD
 * param key Input key to use for encryption
 * param keySize Size of the input key, in bytes. Must be 16, 24, or 32.
 * param tag Input hash tag to compare. Set to NULL to skip tag processing.
 * param tagSize Input size of the tag, in bytes. Must be 4, 8, 12, 13, 14, 15, or 16.
 * return Status from decrypt operation
 */
status_t CAAM_AES_DecryptTagGcm(CAAM_Type *base,
                                caam_handle_t *handle,
                                const uint8_t *ciphertext,
                                uint8_t *plaintext,
                                size_t size,
                                const uint8_t *iv,
                                size_t ivSize,
                                const uint8_t *aad,
                                size_t aadSize,
                                const uint8_t *key,
                                size_t keySize,
                                const uint8_t *tag,
                                size_t tagSize)
{
    caam_desc_aes_gcm_t descBuf;
    status_t status;

    do
    {
        status = CAAM_AES_DecryptTagGcmNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, ivSize, aad,
                                                   aadSize, key, keySize, tag, tagSize);
    } while (status == kStatus_CAAM_Again);

    if (status != 0)
    {
        return status;
    }
    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);

#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*******************************************************************************
 * HASH Code static
 ******************************************************************************/
static status_t caam_hash_check_input_alg(caam_hash_algo_t algo)
{
    if ((algo != kCAAM_XcbcMac) && (algo != kCAAM_Cmac) && (algo != kCAAM_Sha1) && (algo != kCAAM_Sha224) &&
        (algo != kCAAM_Sha256) && (algo != kCAAM_Sha384) && (algo != kCAAM_Sha512))
    {
        return kStatus_InvalidArgument;
    }
    return kStatus_Success;
}

static inline bool caam_hash_alg_is_cmac(caam_hash_algo_t algo)
{
    return ((algo == kCAAM_XcbcMac) || (algo == kCAAM_Cmac));
}

static inline bool caam_hash_alg_is_sha(caam_hash_algo_t algo)
{
    return ((algo == kCAAM_Sha1) || (algo == kCAAM_Sha224) || (algo == kCAAM_Sha256) || (algo == kCAAM_Sha384) ||
            (algo == kCAAM_Sha512));
}

static status_t caam_hash_check_input_args(
    CAAM_Type *base, caam_hash_ctx_t *ctx, caam_hash_algo_t algo, const uint8_t *key, uint32_t keySize)
{
    /* Check validity of input algorithm */
    if (kStatus_Success != caam_hash_check_input_alg(algo))
    {
        return kStatus_InvalidArgument;
    }

    if ((NULL == ctx) || (NULL == base))
    {
        return kStatus_InvalidArgument;
    }

    if (caam_hash_alg_is_cmac(algo))
    {
        if ((NULL == key) || (!caam_check_key_size(keySize)))
        {
            return kStatus_InvalidArgument;
        }
    }

    return kStatus_Success;
}

static status_t caam_hash_check_context(caam_hash_ctx_internal_t *ctxInternal, const uint8_t *data)
{
    if ((NULL == data) || (NULL == ctxInternal) || (NULL == ctxInternal->base) ||
        (kStatus_Success != caam_hash_check_input_alg(ctxInternal->algo)))
    {
        return kStatus_InvalidArgument;
    }
    return kStatus_Success;
}

static uint32_t caam_hash_algo2mode(caam_hash_algo_t algo, uint32_t algState, uint32_t *algOutSize)
{
    uint32_t modeReg = 0u;
    uint32_t outSize = 0u;

    /* Set CAAM algorithm */
    switch (algo)
    {
        case kCAAM_XcbcMac:
            modeReg = (uint32_t)kCAAM_AlgorithmAES | (uint32_t)kCAAM_ModeXCBCMAC;
            outSize = 16u;
            break;
        case kCAAM_Cmac:
            modeReg = (uint32_t)kCAAM_AlgorithmAES | (uint32_t)kCAAM_ModeCMAC;
            outSize = 16u;
            break;
        case kCAAM_Sha1:
            modeReg = (uint32_t)kCAAM_AlgorithmSHA1;
            outSize = (uint32_t)kCAAM_OutLenSha1;
            break;
        case kCAAM_Sha224:
            modeReg = (uint32_t)kCAAM_AlgorithmSHA224;
            outSize = (uint32_t)kCAAM_OutLenSha224;
            break;
        case kCAAM_Sha256:
            modeReg = (uint32_t)kCAAM_AlgorithmSHA256;
            outSize = (uint32_t)kCAAM_OutLenSha256;
            break;
        case kCAAM_Sha384:
            modeReg = (uint32_t)kCAAM_AlgorithmSHA384;
            outSize = (uint32_t)kCAAM_OutLenSha384;
            break;
        case kCAAM_Sha512:
            modeReg = (uint32_t)kCAAM_AlgorithmSHA512;
            outSize = (uint32_t)kCAAM_OutLenSha512;
            break;
        default:
            /* All the cases have been listed above, the default clause should not be reached. */
            break;
    }

    modeReg |= algState;
    if (algOutSize != NULL)
    {
        *algOutSize = outSize;
    }

    return modeReg;
}

static uint32_t caam_hash_algo2ctx_size(caam_hash_algo_t algo, uint32_t how)
{
    uint32_t ctxSize = 0u;

    /* Size of context in bytes for context switching */
    switch (algo)
    {
        case kCAAM_XcbcMac:
            if (how == 0U)
            {
                ctxSize = 48u; /* add K3 and K2 */
            }
            else
            {
                ctxSize = 16u; /* only running or final MAC during UPDATE or FINALIZE or INITIALIZE/FINALIZE */
            }
            break;
        case kCAAM_Cmac:
            if (how == 0U)
            {
                ctxSize = 32u; /* add L */
            }
            else
            {
                ctxSize = 16u; /* only running or final MAC during UPDATE or FINALIZE or INITIALIZE/FINALIZE */
            }
            break;
        /* MDHA use of the Context Register
        The Context Register stores the current digest and running message length. The running
        message length will be 8 bytes immediately following the active digest. The digest size is
        defined as follows:
        MD5: 16 bytes
        SHA-1: 20 bytes
        SHA-224: 28 bytes final digest; 32 bytes running digest
        SHA-256: 32 bytes
        SHA-384: 48 bytes final digest; 64 bytes running digest
        SHA-512: 64 bytes */
        case kCAAM_Sha1:
            ctxSize = 28u; /* 8 + 20 */
            break;
        case kCAAM_Sha224:
        case kCAAM_Sha256:
            ctxSize = 40u; /* 8 + 32 */
            break;
        case kCAAM_Sha384:
        case kCAAM_Sha512:
            ctxSize = 72u; /* 8 + 64 */
            break;
        default:
            /* All the cases have been listed above, the default clause should not be reached. */
            break;
    }
    return ctxSize;
}

static const uint32_t templateHash[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x00000000u, /* KEY */
    /* 02 */ 0x00000000u, /* place: key address */
    /* 03 */ 0x10200000u, /* LOAD bytes to Class Context Register. Offset 0 bytes. */
    /* 04 */ 0x00000000u, /* place: context address */

    /* 05 */ 0x80000000u, /* OPERATION (place either AES MAC or MDHA SHA) */
    /* 06 */ 0x21570000u, /* FIFO LOAD Class Message via SGT and EXT length */
    /* 07 */ 0x00000000u, /* place: SGT address */
    /* 08 */ 0x00000000u, /* place: FIFO LOAD EXT Length size */
    /* 09 */ 0x50200000u, /* STORE bytes from Class Context Register offset 0 bytes. */
    /* 10 */ 0x00000000u, /* place: context address */

    /* 11 */ 0x60240000u, /* FIFO STORE from KEY to memory. */
    /* 12 */ 0x00000000u, /* place: derived key address ECB encrypted */
    /* 13 */ 0xA0C00000u, /* halt always with status 0 */

    /* 14 */ 0x00000000u, /* SGT entry 0 word 0 */
    /* 15 */ 0x00000000u, /* SGT entry 0 word 1 */
    /* 16 */ 0x00000000u, /* SGT entry 0 word 2 */
    /* 17 */ 0x00000000u, /* SGT entry 0 word 3 */

    /* 18 */ 0x00000000u, /* SGT entry 1 word 0 */
    /* 19 */ 0x00000000u, /* SGT entry 1 word 1 */
    /* 20 */ 0x00000000u, /* SGT entry 1 word 2 */
    /* 21 */ 0x00000000u, /* SGT entry 1 word 3 */
};

/*!
 * @brief Add data chunk to SGT table. Append after uncomplete block in ctxInternal if there is any.
 *
 * @param ctxInternal uncomplete block in the hash context - to be inserted before new data chunk
 * @param input new data chunk to insert
 * @param inputSize size in bytes of new data chunk to insert
 * @param numRemain number of bytes that remain in the last uncomplete block
 * @param algState in FINALIZE or INITIALIZE/FINALIZE we add also last uncomplete block bytes
 * @param sgt address of the SGT
 * @param last last call to this function adds Final Bit
 */
static uint32_t caam_hash_sgt_insert(caam_hash_ctx_internal_t *ctxInternal,
                                     const uint8_t *input,
                                     size_t inputSize,
                                     size_t *numRemain,
                                     caam_algorithm_state_t algState,
                                     caam_sgt_entry_t *sgt,
                                     caam_hash_sgt_entry_type_t last)
{
    /* configure SGT
     * *64 bytes multiple in kCAAM_HashInit or kCAAM_HashUpdate
     * *arbitrary amount of data in kCAAM_HashInitFinal or kCAAM_HashFinal
     * min 1 and max 2 SGT entries
     * 1) if there is any data in the context buffer, use it as one entry
     * 2) input as one entry
     */
    uint32_t numBlocks;
    uint32_t remain;
    uint32_t num;
    uint32_t currSgtEntry;

    uint32_t ctxBlksz   = (ctxInternal != NULL) ? ctxInternal->blksz : 0U;
    uint32_t ctxBlkAddr = (ctxInternal != NULL) ? (uint32_t)&ctxInternal->blk.b[0] : 0U;

    currSgtEntry = 0;
    numBlocks    = (inputSize + ctxBlksz) / CAAM_HASH_BLOCK_SIZE;
    remain       = (inputSize + ctxBlksz) % CAAM_HASH_BLOCK_SIZE;

    /* number of bytes for processing
     * only full block multiple in INITIALIZE or UPDATE
     * any size in INITIALIZE/FINALIZE or FINALIZE
     */
    num = (CAAM_HASH_BLOCK_SIZE * numBlocks);
    if ((algState == kCAAM_AlgStateInitFinal) || (algState == kCAAM_AlgStateFinal))
    {
        num += remain; /* add also uncomplete bytes from last block in one of FINALIZE states */
        remain = 0;
    }
    if (numRemain != NULL)
    {
        *numRemain = remain;
    }

    if ((ctxBlksz != 0U) || (0U == ctxBlksz + inputSize))
    {
        sgt[currSgtEntry].address_l = ADD_OFFSET(ctxBlkAddr);
        sgt[currSgtEntry].length    = ctxBlksz;
        if ((kCAAM_HashSgtEntryLast == last) && (0U == inputSize))
        {
            sgt[currSgtEntry].length |= 0x40000000u; /* Final SG entry */
        }
        currSgtEntry++;
    }

    if (inputSize != 0U)
    {
        /* number of bytes for processing
         * only full block multiple in INITIALIZE or UPDATE
         * any size in INITIALIZE/FINALIZE or FINALIZE
         */
        sgt[currSgtEntry].address_l = ADD_OFFSET((uint32_t)input);
        sgt[currSgtEntry].length    = inputSize - remain;
        if (kCAAM_HashSgtEntryLast == last)
        {
            sgt[currSgtEntry].length |= 0x40000000u; /* Final SG entry */
            sgt[currSgtEntry].offset = 0x80000000u;
        }
    }
    return num; /* no of bytes processed in total by these 1 or 2 SGT entries */
}

/*!
 * @brief Create job descriptor for the HASH request and schedule at CAAM job ring
 *
 *
 */
static status_t caam_hash_schedule_input_data(CAAM_Type *base,
                                              caam_handle_t *handle,
                                              caam_hash_algo_t algo,
                                              caam_sgt_entry_t *sgt,
                                              uint32_t dataSize,
                                              caam_hash_sgt_type_t sgtType,
                                              caam_algorithm_state_t algState,
                                              caam_desc_hash_t descriptor,
                                              size_t *outputSize,
                                              void *output,
                                              void *context,
                                              uint32_t keyAddr,
                                              uint32_t keySize)
{
    BUILD_ASSURE(sizeof(templateHash) <= sizeof(caam_desc_hash_t), caam_desc_hash_t_size);
    uint32_t descriptorSize = ARRAY_SIZE(templateHash);
    uint32_t algOutSize     = 0;

    bool isSha = caam_hash_alg_is_sha(algo); /* MDHA engine */
                                             /* how many bytes to read from context register
                                              * we need caam_hash_algo2ctx_size() to return
                                              * full context size (to be used for context restore in descriptor[3])
                                              */
    uint32_t caamCtxSz = caam_hash_algo2ctx_size(algo, 0 /* full context */);

    (void)caam_memcpy(descriptor, templateHash, sizeof(templateHash));

    /* MDHA is always Class 2 CHA, AESA configured at build time as Class 1 CHA */
    uint32_t hashClass = isSha ? 0x04000000u : CAAM_AES_MAC_CLASS;

    /* add class to all commands that need it */
    descriptor[1] |= hashClass;
    descriptor[3] |= hashClass;
    descriptor[5] |= hashClass;
    descriptor[6] |= hashClass;
    descriptor[9] |= hashClass;
    descriptor[11] |= hashClass;

    /* add descriptor size */
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);

    /* kCAAM_AlgStateInit or kCAAM_AlgStateInitFinal needs to skip context load as there is no context */
    if ((algState == kCAAM_AlgStateInit) || (algState == kCAAM_AlgStateInitFinal))
    {
        if (isSha)
        {
            /* HEADER can jump directly to MDHA operation */
            descriptor[0] |= 0x00050000U; /* JUMP to descriptor[5] */
        }
        else
        {
            /* load KEY, then directly to AESA MAC operation */
            descriptor[1] |= (keySize & DESC_KEY_SIZE_MASK);
            descriptor[2] = ADD_OFFSET(keyAddr);
            descriptor[3] = DESC_JUMP_2; /* JUMP to descriptor[5] */
        }
    }
    else
    {
        if (isSha)
        {
            /* MDHA SHA in Update state skips loading the KEY, as MDHA SHA has no configurable key
             * HEADER can jump directly to context restore
             */
            descriptor[0] |= 0x00030000U;      /* JUMP to descriptor[3] */
            /* descriptor[1] = 0xA0000002u; */ /* JUMP to descriptor[3] */
        }
        else
        {
            /* load KEY */
            descriptor[1] |= (keySize & DESC_KEY_SIZE_MASK);
            descriptor[2] = ADD_OFFSET(keyAddr);

            /* XCBC-MAC K1 derived key has been ECB encrypted (black key)
             * so it needs decrypt
             */
            if (kCAAM_XcbcMac == algo)
            {
                descriptor[1] |= (uint32_t)1u << 22; /* ENC */
            }
        }

        /* context restore */
        descriptor[3] |= caamCtxSz;
        descriptor[4] = ADD_OFFSET((uint32_t)(uint32_t *)context);
    }

    /* OPERATION:
     * alg MDHA or AESA
     * mode INITIALIZE or UPDATE or FINALIZE or INITIALIZE/FINALIZE in algState argument
     */

    /* ALGORITHM OPERATION | CLASS | alg | aai | algState */
    descriptor[5] |= caam_hash_algo2mode(algo, (uint32_t)algState << 2, &algOutSize);

    /* configure SGT */
    descriptor[8] = dataSize;
    if (kCAAM_HashSgtInternal == sgtType)
    {
        descriptor[7] = ADD_OFFSET(
            (uint32_t)&descriptor[(uint32_t)kCAAM_HashDescriptorSgtIdx]); /* use SGT embedded in the job descriptor */
        (void)caam_memcpy(&descriptor[(uint32_t)kCAAM_HashDescriptorSgtIdx], (const uint32_t *)(uintptr_t)sgt,
                          sizeof(caam_hash_internal_sgt_t));
    }
    else
    {
        descriptor[7] = ADD_OFFSET((uint32_t)sgt);
    }

    /* save context: context switch init or running or result */
    if ((kCAAM_AlgStateFinal == algState) || (kCAAM_AlgStateInitFinal == algState))
    {
        if (outputSize != NULL)
        {
            *outputSize = algOutSize;
        }
        caamCtxSz = algOutSize;
    }
    else
    {
        uint32_t how = (algState == kCAAM_AlgStateInit) ? 0U : 1U; /* context switch needs full, then running */
        caamCtxSz    = caam_hash_algo2ctx_size(algo, how);
    }
    descriptor[9] |= caamCtxSz;
    if ((kCAAM_AlgStateFinal == algState) || (kCAAM_AlgStateInitFinal == algState))
    {
        /* final result write to output */
        descriptor[10] = ADD_OFFSET((uint32_t)(uint32_t *)output);
    }
    else
    {
        /* context switch write to ctxInternal */
        descriptor[10] = ADD_OFFSET((uint32_t)(uint32_t *)context);
    }

    /* save the derived key K1 in XCBC-MAC. only if context switch. */
    if ((kCAAM_AlgStateInit == algState) && (kCAAM_XcbcMac == algo))
    {
        descriptor[11] |= (keySize & DESC_KEY_SIZE_MASK);
        descriptor[12] = ADD_OFFSET((uint32_t)&keyAddr);
    }
    else
    {
        descriptor[11] = ADD_OFFSET(descriptor[13]); /* always halt with status 0x0 (normal) */
    }

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * @brief Add uncomplete block (ctxInternal), then append new data (to current hash).
 *
 *
 */
static status_t caam_hash_append_data(caam_hash_ctx_internal_t *ctxInternal,
                                      const uint8_t *input,
                                      size_t inputSize,
                                      caam_algorithm_state_t algState,
                                      caam_desc_hash_t descriptor,
                                      size_t *numRemain,
                                      void *output,
                                      size_t *outputSize)
{
    caam_hash_internal_sgt_t sgt;
    (void)memset(&sgt, 0, sizeof(sgt));
    size_t num = caam_hash_sgt_insert(ctxInternal, input, inputSize, numRemain, algState, sgt, kCAAM_HashSgtEntryLast);
    return caam_hash_schedule_input_data(ctxInternal->base, ctxInternal->handle, ctxInternal->algo, sgt, num,
                                         kCAAM_HashSgtInternal, algState, descriptor, outputSize, output,
                                         &ctxInternal->word[0], (uint32_t)&ctxInternal->word[kCAAM_HashCtxKeyStartIdx],
                                         ctxInternal->word[kCAAM_HashCtxKeySize]);
}

/*******************************************************************************
 * HASH Code public
 ******************************************************************************/

/*!
 * brief Initialize HASH context
 *
 * This function initializes the HASH.
 * Key shall be supplied if the underlaying algoritm is AES XCBC-MAC or CMAC.
 * Key shall be NULL if the underlaying algoritm is SHA.
 *
 * For XCBC-MAC, the key length must be 16. For CMAC, the key length can be
 * the AES key lengths supported by AES engine. For MDHA the key length argument
 * is ignored.
 *
 * This functions is used to initialize the context for both blocking and non-blocking
 * CAAM_HASH API.
 * For blocking CAAM HASH API, the HASH context contains all information required for context switch,
 * such as running hash or MAC. For non-blocking CAAM HASH API, the HASH context is used
 * to hold SGT. Therefore, the HASH context cannot be shared between blocking and non-blocking HASH API.
 * With one HASH context, either use only blocking HASH API or only non-blocking HASH API.
 *
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request.
 * param[out] ctx Output hash context
 * param algo Underlaying algorithm to use for hash computation.
 * param key Input key (NULL if underlaying algorithm is SHA)
 * param keySize Size of input key in bytes
 * return Status of initialization
 */
status_t CAAM_HASH_Init(CAAM_Type *base,
                        caam_handle_t *handle,
                        caam_hash_ctx_t *ctx,
                        caam_hash_algo_t algo,
                        const uint8_t *key,
                        size_t keySize)
{
    status_t ret;
    caam_hash_ctx_internal_t *ctxInternal;
    uint32_t i;

    ret = caam_hash_check_input_args(base, ctx, algo, key, keySize);
    if (ret != kStatus_Success)
    {
        return ret;
    }

    /* set algorithm in context struct for later use */
    ctxInternal       = (caam_hash_ctx_internal_t *)(uint32_t)ctx;
    ctxInternal->algo = algo;
    for (i = 0U; i < (uint32_t)kCAAM_HashCtxNumWords; i++)
    {
        ctxInternal->word[i] = 0u;
    }

    /* Steps required only using AES engine */
    if (caam_hash_alg_is_cmac(algo))
    {
        /* store input key and key length in context struct for later use */
        ctxInternal->word[kCAAM_HashCtxKeySize] = keySize;
        (void)caam_memcpy(&ctxInternal->word[kCAAM_HashCtxKeyStartIdx], (const uint32_t *)(uintptr_t)key, keySize);
    }

    ctxInternal->blksz = 0u;
    for (i = 0; i < ARRAY_SIZE(ctxInternal->blk.w); i++)
    {
        ctxInternal->blk.w[i] = 0u;
    }
    ctxInternal->fsm_state = kCAAM_HashInit;
    ctxInternal->base      = base;
    ctxInternal->handle    = handle;

    return kStatus_Success;
}

/*!
 * brief Add data to current HASH
 *
 * Add data to current HASH. This can be called repeatedly with an arbitrary amount of data to be
 * hashed. The functions blocks. If it returns kStatus_Success, the running hash or mac
 * has been updated (CAAM has processed the input data), so the memory at input pointer
 * can be released back to system. The context is updated with the running hash or mac
 * and with all necessary information to support possible context switch.
 *
 * param[in,out] ctx HASH context
 * param input Input data
 * param inputSize Size of input data in bytes
 * return Status of the hash update operation
 */
status_t CAAM_HASH_Update(caam_hash_ctx_t *ctx, const uint8_t *input, size_t inputSize)
{
    caam_desc_hash_t descBuf;
    status_t status;
    caam_hash_ctx_internal_t *ctxInternal;
    bool isUpdateState;
    size_t numRemain = 0;

    /* compile time check for the correct structure size */
    BUILD_ASSURE(sizeof(caam_hash_ctx_internal_t) <= sizeof(caam_hash_ctx_t), caam_hash_ctx_internal_t_size);

    if (0U == inputSize)
    {
        return kStatus_Success;
    }

    /* we do caam_memcpy() input stream, up to buffer size
     * of 64 bytes. then if I have more I have to
     * 1) load Class 2 context
     * 2) schedule CAAM job with INITIALIZE or UPDATE mode (simple if only 64 bytes block is processed. SG table for 2
     * and more)
     * 3) in step 2 process all full 64 bytes blocks
     * 4) copy last not-full buffer size data to buffer.
     * 5) save Class 2 context
     */
    ctxInternal = (caam_hash_ctx_internal_t *)(uint32_t)ctx;
    status      = caam_hash_check_context(ctxInternal, input);
    if (kStatus_Success != status)
    {
        return status;
    }

    /* if we are still less than 64 bytes, keep only in context */
    if ((ctxInternal->blksz + inputSize) <= CAAM_HASH_BLOCK_SIZE)
    {
        (void)caam_memcpy((&ctxInternal->blk.b[0]) + ctxInternal->blksz, input, inputSize);
        ctxInternal->blksz += inputSize;
        return status;
    }
    else
    {
        isUpdateState = ctxInternal->fsm_state == kCAAM_HashUpdate;
        if (!isUpdateState)
        {
            /* Step 2: schedule CAAM job in INITIALIZE mode.
             */
            ctxInternal->fsm_state = kCAAM_HashUpdate;
            /* skip load context as there is no running context yet. */
            status = caam_hash_append_data(ctxInternal, input, inputSize, kCAAM_AlgStateInit, descBuf, &numRemain, NULL,
                                           NULL);
        }
    }

    if (kStatus_Success != status)
    {
        return status;
    }

    if (isUpdateState)
    {
        /* Step 2: schedule CAAM job in UPDATE mode.
         */

        /* process input data and save CAAM context to context structure */
        status =
            caam_hash_append_data(ctxInternal, input, inputSize, kCAAM_AlgStateUpdate, descBuf, &numRemain, NULL, NULL);
        if (status != kStatus_Success)
        {
            return status;
        }
    }

    /* blocking wait */
    status = CAAM_Wait(ctxInternal->base, ctxInternal->handle, descBuf, kCAAM_Blocking);
    if (status != kStatus_Success)
    {
        return status;
    }

#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)&ctxInternal->word[0u], (uint32_t)kCAAM_HashCtxNumWords * sizeof(uint32_t));
#endif /* CAAM_OUT_INVALIDATE */

    /* after job is complete, copy numRemain bytes at the end of the input[] to the context */
    (void)caam_memcpy((&ctxInternal->blk.b[0]), input + inputSize - numRemain, numRemain);
    ctxInternal->blksz = numRemain;

    return status;
}

/*!
 * brief Add input address and size to input data table
 *
 * Add data input pointer to a table maintained internally in the context.
 * Each call of this function creates one entry in the table.
 * The entry consists of the input pointer and inputSize.
 * All entries created by one or multiple calls of this function can be processed
 * in one call to CAAM_HASH_FinishNonBlocking() function.
 * Individual entries can point to non-continuous data in the memory.
 * The processing will occur in the order in which the CAAM_HASH_UpdateNonBlocking()
 * have been called.
 *
 * Memory pointers will be later accessed by CAAM (at time of CAAM_HASH_FinishNonBlocking()),
 * so the memory must stay valid
 * until CAAM_HASH_FinishNonBlocking() has been called and CAAM completes the processing.
 *
 * param[in,out] ctx HASH context
 * param input Input data
 * param inputSize Size of input data in bytes
 * return Status of the hash update operation
 */
status_t CAAM_HASH_UpdateNonBlocking(caam_hash_ctx_t *ctx, const uint8_t *input, size_t inputSize)
{
    status_t status;

    caam_hash_ctx_internal_t *ctxInternal;

    if (0U == inputSize)
    {
        return kStatus_Success;
    }

    /* runtime input validity check */
    ctxInternal = (caam_hash_ctx_internal_t *)(uint32_t)ctx;
    status      = caam_hash_check_context(ctxInternal, input);
    if (kStatus_Success != status)
    {
        return status;
    }

    /* Add input data chunk to SGT */
    uint32_t currSgtEntry = ctxInternal->blksz;
    if (currSgtEntry >= (uint32_t)kCAAM_HashSgtMaxCtxEntries)
    {
        return kStatus_InvalidArgument;
    }

    caam_sgt_entry_t *sgt = &((caam_sgt_entry_t *)(uint32_t)ctxInternal)[currSgtEntry];
    (void)caam_hash_sgt_insert(NULL, input, inputSize, NULL, kCAAM_AlgStateInitFinal, sgt,
                               kCAAM_HashSgtEntryNotLast /* not last. we don't know if this is the last chunk */);
    if (inputSize != 0U)
    {
        ctxInternal->blksz++;
    }

    return status;
}

/*!
 * brief Finalize hashing
 *
 * Outputs the final hash (computed by CAAM_HASH_Update()) and erases the context.
 *
 * param[in,out] ctx Input hash context
 * param[out] output Output hash data
 * param[out] outputSize Output parameter storing the size of the output hash in bytes
 * return Status of the hash finish operation
 */
status_t CAAM_HASH_Finish(caam_hash_ctx_t *ctx, uint8_t *output, size_t *outputSize)
{
    status_t status;
    caam_hash_ctx_internal_t *ctxInternal;
    caam_desc_hash_t descBuf;
    caam_algorithm_state_t algState;
    size_t outputSizeTmp;

    /* runtime input validity check */
    ctxInternal = (caam_hash_ctx_internal_t *)(uint32_t)ctx;
    status      = caam_hash_check_context(ctxInternal, output);
    if (kStatus_Success != status)
    {
        return status;
    }

    /* determine algorithm state to configure
     * based on prior processing.
     * If at least one full block has been processed during HASH_Update() then the state in ctxInternal
     * will be set to kCAAM_HashUpdate and so we will configure FINALIZE algorithm state.
     * Otherwise there is data only in the ctxInternal that we can process in INITIALIZE/FINALIZE.
     */
    if (ctxInternal->fsm_state == kCAAM_HashInit)
    {
        algState = kCAAM_AlgStateInitFinal;
    }
    else
    {
        algState = kCAAM_AlgStateFinal;
    }

    status = caam_hash_append_data(
        ctxInternal, NULL, 0, /* we process only blksz bytes in ctxInternal, so giving NULL and zero size here */
        algState, descBuf, NULL, output, &outputSizeTmp);
    if (kStatus_Success != status)
    {
        return status;
    }

    /* blocking wait */
    status = CAAM_Wait(ctxInternal->base, ctxInternal->handle, descBuf, kCAAM_Blocking);

#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)output, outputSizeTmp);
#endif /* CAAM_OUT_INVALIDATE */

    if (outputSize != NULL)
    {
        *outputSize = outputSizeTmp;
    }

    (void)memset(ctx, 0, sizeof(caam_hash_ctx_t));
    return status;
}

/*!
 * brief Finalize hashing
 *
 * The actual algorithm is computed with all input data, the memory pointers
 * are accessed by CAAM after the function returns.
 * The input data chunks have been specified by prior calls to CAAM_HASH_UpdateNonBlocking().
 * The function schedules the request at CAAM, then returns.
 * After a while, when the CAAM completes processing of the input data chunks,
 * the result is written to the output[] array, outputSize is written and the context
 * is cleared.
 *
 * param[in,out] ctx Input hash context
 * param[out] descriptor Memory for the CAAM descriptor.
 * param[out] output Output hash data
 * param[out] outputSize Output parameter storing the size of the output hash in bytes
 * return Status of the hash finish operation
 */
status_t CAAM_HASH_FinishNonBlocking(caam_hash_ctx_t *ctx,
                                     caam_desc_hash_t descriptor,
                                     uint8_t *output,
                                     size_t *outputSize)
{
    status_t status;
    caam_hash_ctx_internal_t *ctxInternal;

    /* runtime input validity check */
    ctxInternal = (caam_hash_ctx_internal_t *)(uint32_t)ctx;
    status      = caam_hash_check_context(ctxInternal, output);
    if (kStatus_Success != status)
    {
        return status;
    }

    uint32_t currSgtEntry = ctxInternal->blksz;
    if (currSgtEntry > (uint32_t)kCAAM_HashSgtMaxCtxEntries)
    {
        return kStatus_InvalidArgument;
    }

    caam_sgt_entry_t *sgt = &((caam_sgt_entry_t *)(uint32_t)ctxInternal)[0];

    /* mark currSgtEntry with Final Bit */
    uint32_t i;
    uint32_t totalLength = 0;
    for (i = 0; i < currSgtEntry; i++)
    {
        totalLength += sgt[i].length;
    }
    sgt[currSgtEntry].length |= 0x40000000u; /* Final SG entry */

    status = caam_hash_schedule_input_data(ctxInternal->base, ctxInternal->handle, ctxInternal->algo, sgt, totalLength,
                                           kCAAM_HashSgtExternal, kCAAM_AlgStateInitFinal, descriptor, outputSize,
                                           output, NULL, (uint32_t)&ctxInternal->word[kCAAM_HashCtxKeyStartIdx],
                                           ctxInternal->word[kCAAM_HashCtxKeySize]);
    return status;
}

/*!
 * brief Create HASH on given data
 *
 * Perform the full keyed XCBC-MAC/CMAC or SHA in one function call.
 *
 * Key shall be supplied if the underlaying algoritm is AES XCBC-MAC or CMAC.
 * Key shall be NULL if the underlaying algoritm is SHA.
 *
 * For XCBC-MAC, the key length must be 16. For CMAC, the key length can be
 * the AES key lengths supported by AES engine. For MDHA the key length argument
 * is ignored.
 *
 * The function is blocking.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request.
 * param algo Underlaying algorithm to use for hash computation.
 * param input Input data
 * param inputSize Size of input data in bytes
 * param key Input key (NULL if underlaying algorithm is SHA)
 * param keySize Size of input key in bytes
 * param[out] output Output hash data
 * param[out] outputSize Output parameter storing the size of the output hash in bytes
 * return Status of the one call hash operation.
 */
status_t CAAM_HASH(CAAM_Type *base,
                   caam_handle_t *handle,
                   caam_hash_algo_t algo,
                   const uint8_t *input,
                   size_t inputSize,
                   const uint8_t *key,
                   size_t keySize,
                   uint8_t *output,
                   size_t *outputSize)
{
    status_t status;
    caam_desc_hash_t descBuf;

    status = CAAM_HASH_NonBlocking(base, handle, descBuf, algo, input, inputSize, key, keySize, output, outputSize);
    if (kStatus_Success != status)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)output, *outputSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Create HASH on given data
 *
 * Perform the full keyed XCBC-MAC/CMAC or SHA in one function call.
 *
 * Key shall be supplied if the underlaying algoritm is AES XCBC-MAC or CMAC.
 * Key shall be NULL if the underlaying algoritm is SHA.
 *
 * For XCBC-MAC, the key length must be 16. For CMAC, the key length can be
 * the AES key lengths supported by AES engine. For MDHA the key length argument
 * is ignored.
 *
 * The function is non-blocking. The request is scheduled at CAAM.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param algo Underlaying algorithm to use for hash computation.
 * param input Input data
 * param inputSize Size of input data in bytes
 * param key Input key (NULL if underlaying algorithm is SHA)
 * param keySize Size of input key in bytes
 * param[out] output Output hash data
 * param[out] outputSize Output parameter storing the size of the output hash in bytes
 * return Status of the one call hash operation.
 */
status_t CAAM_HASH_NonBlocking(CAAM_Type *base,
                               caam_handle_t *handle,
                               caam_desc_hash_t descriptor,
                               caam_hash_algo_t algo,
                               const uint8_t *input,
                               size_t inputSize,
                               const uint8_t *key,
                               size_t keySize,
                               uint8_t *output,
                               size_t *outputSize)
{
    status_t status;
    caam_algorithm_state_t algState;
    caam_hash_internal_sgt_t sgt;

    (void)memset(&sgt, 0, sizeof(sgt));

    algState     = kCAAM_AlgStateInitFinal;
    uint32_t num = caam_hash_sgt_insert(NULL,             /* no ctxInternal data to pre-pend before input data chunk */
                                        input, inputSize, /* data and size in bytes */
                                        NULL, /* all data is processed during kCAAM_AlgStateInitFinal, nothing remain */
                                        algState, sgt, kCAAM_HashSgtEntryLast); /* sgt table, entry 0 word 0 */

    /* schedule the request at CAAM */
    status = caam_hash_schedule_input_data(base, handle, algo, sgt, num, kCAAM_HashSgtInternal, algState, descriptor,
                                           outputSize, output, NULL, (uint32_t)key, keySize);
    return status;
}
/*******************************************************************************
 * CRC Code static
 ******************************************************************************/
static status_t caam_crc_check_input_alg(caam_crc_algo_t algo)
{
    if ((algo != kCAAM_CrcIEEE) && (algo != kCAAM_CrciSCSI) && (algo != kCAAM_CrcCUSTPOLY))
    {
        return kStatus_InvalidArgument;
    }
    return kStatus_Success;
}

static inline bool caam_crc_alg_is_customcrc(caam_crc_algo_t algo)
{
    return (algo == kCAAM_CrcCUSTPOLY);
}

static status_t caam_crc_check_input_args(
    CAAM_Type *base, caam_hash_ctx_t *ctx, caam_crc_algo_t algo, const uint8_t *polynomial, size_t polynomialSize)
{
    /* Check validity of input algorithm */
    if (kStatus_Success != caam_crc_check_input_alg(algo))
    {
        return kStatus_InvalidArgument;
    }

    if ((NULL == ctx) || (NULL == base))
    {
        return kStatus_InvalidArgument;
    }

    if (caam_crc_alg_is_customcrc(algo))
    {
        if ((NULL == polynomial) && ((polynomialSize > 4u) || (polynomialSize < 1u)))
        {
            return kStatus_InvalidArgument;
        }
    }

    return kStatus_Success;
}

static status_t caam_crc_check_context(caam_crc_ctx_internal_t *ctxInternal, const uint8_t *data)
{
    if ((NULL == data) || (NULL == ctxInternal) || (NULL == ctxInternal->base) ||
        (kStatus_Success != caam_crc_check_input_alg(ctxInternal->algo)))
    {
        return kStatus_InvalidArgument;
    }
    return kStatus_Success;
}

static uint32_t caam_crc_algo2mode(caam_crc_algo_t algo, uint32_t crcMode, uint32_t algState)
{
    uint32_t modeReg = 0u;

    /* Set CAAM algorithm */
    switch (algo)
    {
        case kCAAM_CrcIEEE:
            modeReg = (uint32_t)kCAAM_AlgorithmCRC | (uint32_t)kCAAM_CRC_ModeIEEE802;
            break;
        case kCAAM_CrciSCSI:
            modeReg = (uint32_t)kCAAM_AlgorithmCRC | (uint32_t)kCAAM_CRC_ModeIETF3385;
            break;
        case kCAAM_CrcCUSTPOLY:
            modeReg = (uint32_t)kCAAM_AlgorithmCRC | crcMode | (uint32_t)kCAAM_CRC_ModeCUSTPOLY;
            break;
        default:
            /* All the cases have been listed above, the default clause should not be reached. */
            break;
    }

    modeReg |= algState;

    return modeReg;
}

/*!
 * @brief Add data chunk to SGT table. Append after uncomplete block in ctxInternal if there is any.
 *
 * @param ctxInternal uncomplete block in the crc context - to be inserted before new data chunk
 * @param input new data chunk to insert
 * @param inputSize size in bytes of new data chunk to insert
 * @param numRemain number of bytes that remain in the last uncomplete block
 * @param algState in FINALIZE or INITIALIZE/FINALIZE we add also last uncomplete block bytes
 * @param sgt address of the SGT
 * @param last last call to this function adds Final Bit
 */
static uint32_t caam_crc_sgt_insert(caam_crc_ctx_internal_t *ctxInternal,
                                    const uint8_t *input,
                                    size_t inputSize,
                                    size_t *numRemain,
                                    caam_algorithm_state_t algState,
                                    caam_sgt_entry_t *sgt,
                                    caam_hash_sgt_entry_type_t last)
{
    /* configure SGT
     * *64 bytes multiple in kCAAM_HashInit or kCAAM_HashUpdate
     * *arbitrary amount of data in kCAAM_HashInitFinal or kCAAM_HashFinal
     * min 1 and max 2 SGT entries
     * 1) if there is any data in the context buffer, use it as one entry
     * 2) input as one entry
     */
    uint32_t numBlocks;
    uint32_t remain;
    uint32_t num;
    uint32_t currSgtEntry;

    uint32_t ctxBlksz   = (ctxInternal != NULL) ? ctxInternal->blksz : 0U;
    uint32_t ctxBlkAddr = (ctxInternal != NULL) ? (uint32_t)&ctxInternal->blk.b[0] : 0U;

    currSgtEntry = 0;
    numBlocks    = (inputSize + ctxBlksz) / CAAM_HASH_BLOCK_SIZE;
    remain       = (inputSize + ctxBlksz) % CAAM_HASH_BLOCK_SIZE;

    /* number of bytes for processing
     * only full block multiple in INITIALIZE or UPDATE
     * any size in INITIALIZE/FINALIZE or FINALIZE
     */
    num = (CAAM_HASH_BLOCK_SIZE * numBlocks);
    if ((algState == kCAAM_AlgStateInitFinal) || (algState == kCAAM_AlgStateFinal))
    {
        num += remain; /* add also uncomplete bytes from last block in one of FINALIZE states */
        remain = 0;
    }
    if (numRemain != NULL)
    {
        *numRemain = remain;
    }

    if ((ctxBlksz != 0U) || (0U == ctxBlksz + inputSize))
    {
        sgt[currSgtEntry].address_l = ADD_OFFSET(ctxBlkAddr);
        sgt[currSgtEntry].length    = ctxBlksz;
        if ((kCAAM_HashSgtEntryLast == last) && (0U == inputSize))
        {
            sgt[currSgtEntry].length |= 0x40000000u; /* Final SG entry */
        }
        currSgtEntry++;
    }

    if (inputSize != 0U)
    {
        /* number of bytes for processing
         * only full block multiple in INITIALIZE or UPDATE
         * any size in INITIALIZE/FINALIZE or FINALIZE
         */
        sgt[currSgtEntry].address_l = ADD_OFFSET((uint32_t)input);
        sgt[currSgtEntry].length    = inputSize - remain;
        if (kCAAM_HashSgtEntryLast == last)
        {
            sgt[currSgtEntry].length |= 0x40000000u; /* Final SG entry */
            sgt[currSgtEntry].offset = 0x80000000u;
        }
    }
    return num; /* no of bytes processed in total by these 1 or 2 SGT entries */
}

/*!
 * @brief Create job descriptor for the CRC request and schedule at CAAM job ring
 *
 *
 */
static status_t caam_crc_schedule_input_data(CAAM_Type *base,
                                             caam_handle_t *handle,
                                             caam_crc_algo_t algo,
                                             caam_aai_crc_alg_t crcMode,
                                             caam_sgt_entry_t *sgt,
                                             uint32_t dataSize,
                                             caam_hash_sgt_type_t sgtType,
                                             caam_algorithm_state_t algState,
                                             caam_desc_hash_t descriptor,
                                             size_t *outputSize,
                                             void *output,
                                             void *context,
                                             uint32_t polynomialAddr,
                                             uint32_t polynomialSize)
{
    BUILD_ASSURE(sizeof(templateHash) <= sizeof(caam_desc_hash_t), caam_desc_hash_t_size);
    uint32_t descriptorSize = ARRAY_SIZE(templateHash);
    uint32_t algOutSize     = 4u;

    bool isCustomCRC = caam_crc_alg_is_customcrc(algo);

    /* MDHA use of the Context Register
        The Context Register stores the current digest and running message length. The running
        message length will be 8 bytes immediately following the active digest. The digest size is
        defined as follows:
 CRC: 4 bytes so caamCtxSz = 8 +4 */
    uint32_t caamCtxSz = 12u;

    (void)caam_memcpy(descriptor, templateHash, sizeof(templateHash));

    /* CRC is Class 2 CHA */

    /* add class to all commands that need it */
    descriptor[1] |= 0x04000000u;
    descriptor[3] |= 0x04000000u;
    descriptor[5] |= 0x04000000u;
    descriptor[6] |= 0x04000000u;
    descriptor[9] |= 0x04000000u;
    descriptor[11] |= 0x04000000u;

    /* add descriptor size */
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);

    /* kCAAM_AlgStateInit or kCAAM_AlgStateInitFinal needs to skip context load as there is no context */
    if ((algState == kCAAM_AlgStateInit) || (algState == kCAAM_AlgStateInitFinal))
    {
        if (!isCustomCRC)
        {
            /* HEADER can jump directly to MDHA operation */
            descriptor[0] |= 0x00050000U; /* JUMP to descriptor[5] */
        }
        else
        {
            /* load Polynomial, then directly to CRC operation */
            descriptor[1] |= (polynomialSize & DESC_KEY_SIZE_MASK);
            descriptor[2] = ADD_OFFSET(polynomialAddr);
            descriptor[3] = DESC_JUMP_2; /* JUMP to descriptor[5] */
        }
    }
    else
    {
        if (!isCustomCRC)
        {
            /* CRC without custom polynomial in Update state skips loading the Polynomial
             * HEADER can jump directly to context restore
             */
            descriptor[0] |= 0x00030000U; /* JUMP to descriptor[3] */
        }
        else
        {
            /* load Polynomial */
            descriptor[1] |= (polynomialSize & DESC_KEY_SIZE_MASK);
            descriptor[2] = ADD_OFFSET(polynomialAddr);
        }

        /* context restore */
        descriptor[3] |= caamCtxSz;
        descriptor[4] = ADD_OFFSET((uint32_t)(uint32_t *)context);
    }

    /* OPERATION:
     * alg MDHA
     * mode INITIALIZE or UPDATE or FINALIZE or INITIALIZE/FINALIZE in algState argument
     */

    /* ALGORITHM OPERATION | CLASS | alg | aai | algState */
    descriptor[5] |= caam_crc_algo2mode(algo, (uint32_t)crcMode, (uint32_t)algState << 2);

    /* configure SGT */
    descriptor[8] = dataSize;
    if (kCAAM_HashSgtInternal == sgtType)
    {
        descriptor[7] = ADD_OFFSET(
            (uint32_t)&descriptor[(uint32_t)kCAAM_HashDescriptorSgtIdx]); /* use SGT embedded in the job descriptor */
        (void)caam_memcpy(&descriptor[(uint32_t)kCAAM_HashDescriptorSgtIdx], (const uint32_t *)(uintptr_t)sgt,
                          sizeof(caam_hash_internal_sgt_t));
    }
    else
    {
        descriptor[7] = ADD_OFFSET((uint32_t)sgt);
    }

    /* save context: context switch init or running or result */
    if ((kCAAM_AlgStateFinal == algState) || (kCAAM_AlgStateInitFinal == algState))
    {
        if (outputSize != NULL)
        {
            if (algOutSize < *outputSize)
            {
                *outputSize = algOutSize;
            }
            else
            {
                algOutSize = *outputSize;
            }
        }
        caamCtxSz = algOutSize;
    }
    else
    {
        caamCtxSz = 12u;
    }
    descriptor[9] |= caamCtxSz;
    if ((kCAAM_AlgStateFinal == algState) || (kCAAM_AlgStateInitFinal == algState))
    {
        /* final result write to output */
        descriptor[10] = ADD_OFFSET((uint32_t)(uint32_t *)output);
    }
    else
    {
        /* context switch write to ctxInternal */
        descriptor[10] = ADD_OFFSET((uint32_t)(uint32_t *)context);
    }

    descriptor[11] = ADD_OFFSET(descriptor[13]); /* always halt with status 0x0 (normal) */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * @brief Add uncomplete block (ctxInternal), then append new data (to current crc calculation).
 *
 *
 */
static status_t caam_crc_append_data(caam_crc_ctx_internal_t *ctxInternal,
                                     const uint8_t *input,
                                     size_t inputSize,
                                     caam_algorithm_state_t algState,
                                     caam_desc_hash_t descriptor,
                                     size_t *numRemain,
                                     void *output,
                                     size_t *outputSize)
{
    caam_hash_internal_sgt_t sgt;
    (void)memset(&sgt, 0, sizeof(sgt));
    size_t num = caam_crc_sgt_insert(ctxInternal, input, inputSize, numRemain, algState, sgt, kCAAM_HashSgtEntryLast);
    return caam_crc_schedule_input_data(ctxInternal->base, ctxInternal->handle, ctxInternal->algo, ctxInternal->crcmode,
                                        sgt, num, kCAAM_HashSgtInternal, algState, descriptor, outputSize, output,
                                        &ctxInternal->word[0], (uint32_t)&ctxInternal->word[kCAAM_HashCtxKeyStartIdx],
                                        ctxInternal->word[kCAAM_HashCtxKeySize]);
}

/*******************************************************************************
 * CRC Code public
 ******************************************************************************/

/*!
 * brief Initialize CRC context
 *
 * This function initializes the CRC context.
 * polynomial shall be supplied if the underlaying algoritm is kCAAM_CrcCUSTPOLY.
 * polynomial shall be NULL if the underlaying algoritm is kCAAM_CrcIEEE or kCAAM_CrciSCSI.
 *
 * This functions is used to initialize the context for CAAM_CRC API
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request.
 * param[out] ctx Output crc context
 * param algo Underlaying algorithm to use for CRC computation
 * param polynomial CRC polynomial (NULL if underlaying algorithm is kCAAM_CrcIEEE or kCAAM_CrciSCSI)
 * param polynomialSize Size of polynomial in bytes (0u if underlaying algorithm is kCAAM_CrcIEEE or kCAAM_CrciSCSI)
 * param mode Specify how CRC engine manipulates its input and output data
 * return Status of initialization
 */
status_t CAAM_CRC_Init(CAAM_Type *base,
                       caam_handle_t *handle,
                       caam_crc_ctx_t *ctx,
                       caam_crc_algo_t algo,
                       const uint8_t *polynomial,
                       size_t polynomialSize,
                       caam_aai_crc_alg_t mode)
{
    status_t ret = kStatus_Fail;
    caam_crc_ctx_internal_t *ctxInternal;
    uint32_t i;

    ret = caam_crc_check_input_args(base, ctx, algo, polynomial, polynomialSize);
    if (ret != kStatus_Success)
    {
        return ret;
    }

    /* set algorithm in context struct for later use */
    ctxInternal          = (caam_crc_ctx_internal_t *)(uint32_t)ctx;
    ctxInternal->algo    = algo;
    ctxInternal->crcmode = mode;
    for (i = 0U; i < (uint32_t)kCAAM_HashCtxNumWords; i++)
    {
        ctxInternal->word[i] = 0u;
    }

    /* Steps required only using CRC engine with custom polynomial */
    if (caam_crc_alg_is_customcrc(algo))
    {
        /* store polynomial and polynomial length in context struct for later use */
        ctxInternal->word[kCAAM_HashCtxKeySize] = polynomialSize;
        (void)caam_memcpy(&ctxInternal->word[kCAAM_HashCtxKeyStartIdx], (const uint32_t *)(uintptr_t)polynomial,
                          polynomialSize);
    }

    ctxInternal->blksz = 0u;
    for (i = 0; i < ARRAY_SIZE(ctxInternal->blk.w); i++)
    {
        ctxInternal->blk.w[i] = 0u;
    }
    ctxInternal->fsm_state = kCAAM_HashInit;
    ctxInternal->base      = base;
    ctxInternal->handle    = handle;

    return kStatus_Success;
}

/*!
 * brief Add data to current CRC
 *
 * Add data to current CRC. This can be called repeatedly. The functions blocks. If it returns kStatus_Success, the
 * running CRC has been updated (CAAM has processed the input data), so the memory at input pointer can be released back
 * to system. The context is updated with the running CRC and with all necessary information to support possible context
 * switch.
 *
 * param[in,out] ctx CRC context
 * param input Input data
 * param inputSize Size of input data in bytes
 * return Status of the crc update operation
 */
status_t CAAM_CRC_Update(caam_crc_ctx_t *ctx, const uint8_t *input, size_t inputSize)
{
    caam_desc_hash_t descBuf;
    status_t status;
    caam_crc_ctx_internal_t *ctxInternal;
    bool isUpdateState;
    size_t numRemain = 0;

    /* compile time check for the correct structure size */
    BUILD_ASSURE(sizeof(caam_crc_ctx_internal_t) <= sizeof(caam_crc_ctx_t), caam_crc_ctx_internal_t_size);

    if (0U == inputSize)
    {
        return kStatus_Success;
    }

    /* we do caam_memcpy() input stream, up to buffer size
     * of 64 bytes. then if I have more I have to
     * 1) load Class 2 context
     * 2) schedule CAAM job with INITIALIZE or UPDATE mode (simple if only 64 bytes block is processed. SG table for 2
     * and more)
     * 3) in step 2 process all full 64 bytes blocks
     * 4) copy last not-full buffer size data to buffer.
     * 5) save Class 2 context
     */
    ctxInternal = (caam_crc_ctx_internal_t *)(uint32_t)ctx;
    status      = caam_crc_check_context(ctxInternal, input);
    if (kStatus_Success != status)
    {
        return status;
    }

    /* if we are still less than 64 bytes, keep only in context */
    if ((ctxInternal->blksz + inputSize) <= CAAM_HASH_BLOCK_SIZE)
    {
        (void)caam_memcpy((&ctxInternal->blk.b[0]) + ctxInternal->blksz, input, inputSize);
        ctxInternal->blksz += inputSize;
        return status;
    }
    else
    {
        isUpdateState = ctxInternal->fsm_state == kCAAM_HashUpdate;
        if (!isUpdateState)
        {
            /* Step 2: schedule CAAM job in INITIALIZE mode.
             */
            ctxInternal->fsm_state = kCAAM_HashUpdate;
            /* skip load context as there is no running context yet. */
            status = caam_crc_append_data(ctxInternal, input, inputSize, kCAAM_AlgStateInit, descBuf, &numRemain, NULL,
                                          NULL);
        }
    }

    if (kStatus_Success != status)
    {
        return status;
    }

    if (isUpdateState)
    {
        /* Step 2: schedule CAAM job in UPDATE mode.
         */

        /* process input data and save CAAM context to context structure */
        status =
            caam_crc_append_data(ctxInternal, input, inputSize, kCAAM_AlgStateUpdate, descBuf, &numRemain, NULL, NULL);
        if (status != kStatus_Success)
        {
            return status;
        }
    }

    /* blocking wait */
    status = CAAM_Wait(ctxInternal->base, ctxInternal->handle, descBuf, kCAAM_Blocking);
    if (status != kStatus_Success)
    {
        return status;
    }

#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)&ctxInternal->word[0u], (uint32_t)kCAAM_HashCtxNumWords * sizeof(uint32_t));
#endif /* CAAM_OUT_INVALIDATE */

    /* after job is complete, copy numRemain bytes at the end of the input[] to the context */
    (void)caam_memcpy((&ctxInternal->blk.b[0]), input + inputSize - numRemain, numRemain);
    ctxInternal->blksz = numRemain;

    return status;
}

/*!
 * brief Finalize CRC
 *
 * Outputs the final CRC (computed by CAAM_CRC_Update()) and erases the context.
 *
 * param[in,out] ctx Input crc context
 * param[out] output Output crc data
 * param[out] outputSize Output parameter storing the size of the output crc in bytes
 * return Status of the crc finish operation
 */
status_t CAAM_CRC_Finish(caam_crc_ctx_t *ctx, uint8_t *output, size_t *outputSize)
{
    status_t status;
    caam_crc_ctx_internal_t *ctxInternal;
    caam_desc_hash_t descBuf;
    caam_algorithm_state_t algState;

    /* runtime input validity check */
    ctxInternal = (caam_crc_ctx_internal_t *)(uint32_t)ctx;
    status      = caam_crc_check_context(ctxInternal, output);
    if (kStatus_Success != status)
    {
        return status;
    }

    /* determine algorithm state to configure
     * based on prior processing.
     * If at least one full block has been processed during HASH_Update() then the state in ctxInternal
     * will be set to kCAAM_HashUpdate and so we will configure FINALIZE algorithm state.
     * Otherwise there is data only in the ctxInternal that we can process in INITIALIZE/FINALIZE.
     */
    if (ctxInternal->fsm_state == kCAAM_HashInit)
    {
        algState = kCAAM_AlgStateInitFinal;
    }
    else
    {
        algState = kCAAM_AlgStateFinal;
    }

    status = caam_crc_append_data(ctxInternal, NULL,
                                  0, /* we process only blksz bytes in ctxInternal, so giving NULL and zero size here */
                                  algState, descBuf, NULL, output, outputSize);
    if (kStatus_Success != status)
    {
        return status;
    }

    /* blocking wait */
    status = CAAM_Wait(ctxInternal->base, ctxInternal->handle, descBuf, kCAAM_Blocking);

#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)output, 32u);
#endif /* CAAM_OUT_INVALIDATE */

    (void)memset(ctx, 0, sizeof(caam_crc_ctx_t));
    return status;
}

/*!
 * brief Create CRC on given data
 *
 * Perform CRC in one function call.
 *
 * Polynomial shall be supplied if underlaying algorithm is kCAAM_CrcCUSTPOLY.
 * Polynomial shall be NULL if underlaying algorithm is kCAAM_CrcIEEE or kCAAM_CrciSCSI.
 *
 *
 * The function is blocking.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request.
 * param algo Underlaying algorithm to use for crc computation.
 * param mode Specify how CRC engine manipulates its input and output data.
 * param input Input data
 * param inputSize Size of input data in bytes
 * param polynomial CRC polynomial (NULL if underlaying algorithm is kCAAM_CrcIEEE or kCAAM_CrciSCSI)
 * param polynomialSize Size of input polynomial in bytes (0U if underlaying algorithm is kCAAM_CrcIEEE or
 * kCAAM_CrciSCSI) param[out] output Output crc data param[out] outputSize Output parameter storing the size of the
 * output crc in bytes return Status of the one call crc operation.
 */
status_t CAAM_CRC(CAAM_Type *base,
                  caam_handle_t *handle,
                  caam_crc_algo_t algo,
                  caam_aai_crc_alg_t mode,
                  const uint8_t *input,
                  size_t inputSize,
                  const uint8_t *polynomial,
                  size_t polynomialSize,
                  uint8_t *output,
                  size_t *outputSize)
{
    status_t status;
    caam_desc_hash_t descBuf;

    status = CAAM_CRC_NonBlocking(base, handle, descBuf, algo, mode, input, inputSize, polynomial, polynomialSize,
                                  output, outputSize);
    if (kStatus_Success != status)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)output, *outputSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Create CRC on given data
 *
 * Perform CRC in one function call.
 *
 * Polynomial shall be supplied if underlaying algorithm is kCAAM_CrcCUSTPOLY.
 * Polynomial shall be NULL if underlaying algorithm is kCAAM_CrcIEEE or kCAAM_CrciSCSI.
 *
 * The function is non-blocking. The request is scheduled at CAAM.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request.
 * param[out] descriptor Memory for the CAAM descriptor.
 * param algo Underlaying algorithm to use for crc computation.
 * param mode Specify how CRC engine manipulates its input and output data.
 * param input Input data
 * param inputSize Size of input data in bytes
 * param polynomial CRC polynomial (NULL if underlaying algorithm is kCAAM_CrcIEEE or kCAAM_CrciSCSI)
 * param polynomialSize Size of polynomial in bytes (0U if underlaying algorithm is kCAAM_CrcIEEE or kCAAM_CrciSCSI)
 * param[out] output Output crc data
 * param[out] outputSize Output parameter storing the size of the output crc in bytes
 * return Status of the one call crc operation.
 */
status_t CAAM_CRC_NonBlocking(CAAM_Type *base,
                              caam_handle_t *handle,
                              caam_desc_hash_t descriptor,
                              caam_crc_algo_t algo,
                              caam_aai_crc_alg_t mode,
                              const uint8_t *input,
                              size_t inputSize,
                              const uint8_t *polynomial,
                              size_t polynomialSize,
                              uint8_t *output,
                              size_t *outputSize)
{
    status_t status;
    caam_algorithm_state_t algState;
    caam_hash_internal_sgt_t sgt;

    (void)memset(&sgt, 0, sizeof(sgt));

    algState     = kCAAM_AlgStateInitFinal;
    uint32_t num = caam_hash_sgt_insert(NULL,             /* no ctxInternal data to pre-pend before input data chunk */
                                        input, inputSize, /* data and size in bytes */
                                        NULL, /* all data is processed during kCAAM_AlgStateInitFinal, nothing remain */
                                        algState, sgt, kCAAM_HashSgtEntryLast); /* sgt table, entry 0 word 0 */

    /* schedule the request at CAAM */
    status = caam_crc_schedule_input_data(base, handle, algo, mode, sgt, num, kCAAM_HashSgtInternal, algState,
                                          descriptor, outputSize, output, NULL, (uint32_t)polynomial, polynomialSize);
    return status;
}
/*******************************************************************************
 * RNG Code public
 ******************************************************************************/

/*!
 * brief Initializes user configuration structure to default.
 *
 * This function initializes the configure structure to default value. the default
 * value are:
 * code
 *     config->autoReseedInterval = 0;
 *     config->personalString = NULL;
 * endcode
 *
 * param config   User configuration structure.
 * return status of the request
 */
status_t CAAM_RNG_GetDefaultConfig(caam_rng_config_t *config)
{
    status_t status;

    if (config != NULL)
    {
        config->autoReseedInterval = 0; /* zero means hardware default of 10.000.000 will be used */
        config->personalString     = NULL;
        status                     = kStatus_Success;
    }
    else
    {
        status = kStatus_InvalidArgument;
    }

    return status;
}

/*!
 * brief Instantiate the CAAM RNG state handle
 *
 * This function instantiates CAAM RNG state handle.
 * The function is blocking and returns after CAAM has processed the request.
 *
 * param base CAAM peripheral base address
 * param handle CAAM jobRing used for this request
 * param stateHandle RNG state handle to instantiate
 * param config Pointer to configuration structure.
 * return Status of the request
 */
status_t CAAM_RNG_Init(CAAM_Type *base,
                       caam_handle_t *handle,
                       caam_rng_state_handle_t stateHandle,
                       const caam_rng_config_t *config)
{
    status_t status;

    /* create job descriptor */
    rngInstantiate[0]              = 0xB0800006u;
    rngInstantiate[1]              = 0x12200020u; /* LOAD 32 bytes of  to Class 1 Context Register. Offset 0 bytes. */
    rngInstantiate[2]              = (uint32_t)ADD_OFFSET((uint32_t)config->personalString);
    rngInstantiate[3]              = 0x12820004u; /* LOAD Immediate 4 bytes to Class 1 Data Size Register. */
    rngInstantiate[4]              = config->autoReseedInterval; /* value for the Class 1 Data Size Register */
    rngInstantiate[5]              = 0x82500006u;                /* RNG instantiate state handle:
                                                                  *   TST=0 for normal non-deterministic mode
                                                                  *   PR=1 for prediction resistance
                                                                  */

    if (kCAAM_RngStateHandle1 == stateHandle)
    {
        rngInstantiate[5] |= 1u << 4;
    }

    /* default auto reseed interval */
    if (config->autoReseedInterval == 0U)
    {
        rngInstantiate[3] = DESC_JUMP_2; /* jump to current index + 2 (=5) */
    }

    /* optional personalization string present */
    if ((config->personalString) != NULL)
    {
        rngInstantiate[5] |= (uint32_t)1u << 10; /* set PS bit in ALG OPERATION (AS=01 Instantiate) */
    }
    else
    {
        rngInstantiate[1] = DESC_JUMP_2; /* jump to current index + 2 (=3) */
    }

    /* schedule the job and block wait for result */
    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &rngInstantiate[0]);
    } while (status != kStatus_Success);

    status = CAAM_Wait(base, handle, &rngInstantiate[0], kCAAM_Blocking);

    return status;
}

/*!
 * brief Uninstantiate the CAAM RNG state handle
 *
 * This function uninstantiates CAAM RNG state handle.
 * The function is blocking and returns after CAAM has processed the request.
 *
 * param base CAAM peripheral base address
 * param handle jobRing used for this request.
 * param stateHandle RNG state handle to uninstantiate
 * return Status of the request
 */
status_t CAAM_RNG_Deinit(CAAM_Type *base, caam_handle_t *handle, caam_rng_state_handle_t stateHandle)
{
    status_t status;

    /* create job descriptor */
    caam_desc_rng_t rngUninstantiate = {0};
    rngUninstantiate[0]              = 0xB0800002u; /* HEADER */
    rngUninstantiate[1] = 0x8250000Cu; /* ALG OPERATION: RNG uninstantiate state handle (AS=11 Uninstantiate) */

    if (kCAAM_RngStateHandle1 == stateHandle)
    {
        rngUninstantiate[1] |= 1u << 4;
    }

    /* schedule the job and block wait for result */
    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &rngUninstantiate[0]);
    } while (status != kStatus_Success);

    status = CAAM_Wait(base, handle, &rngUninstantiate[0], kCAAM_Blocking);

    return status;
}

/*!
 * brief Generate Secure Key
 *
 * This function generates random data writes it to Secure Key registers.
 * The function is blocking and returns after CAAM has processed the request.
 * RNG state handle 0 is always used.
 *
 * param base CAAM peripheral base address
 * param handle jobRing used for this request
 * param additionalEntropy NULL or Pointer to optional 256-bit additional entropy.
 * return Status of the request
 */
status_t CAAM_RNG_GenerateSecureKey(CAAM_Type *base, caam_handle_t *handle, caam_rng_generic256_t additionalEntropy)
{
    status_t status;

    /* create job descriptor */
    rngGenSeckey[0]              = 0xB0800004u; /* HEADER */
    rngGenSeckey[1]              = 0x12200020u; /* LOAD 32 bytes of  to Class 1 Context Register. Offset 0 bytes. */
    rngGenSeckey[2]              = ADD_OFFSET((uint32_t)additionalEntropy);
    rngGenSeckey[3]              = 0x82501000u; /* set SK bit in ALG OPERATION (AS=00 Generate) */

    /* optional additional input included */
    if ((additionalEntropy) != NULL)
    {
        rngGenSeckey[3] |= (uint32_t)1u << 11; /* set AI bit in ALG OPERATION */
    }
    else
    {
        rngGenSeckey[1] = DESC_JUMP_2; /* jump to current index + 2 (=3) */
    }

    /* schedule the job and block wait for result */
    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &rngGenSeckey[0]);
    } while (status != kStatus_Success);

    status = CAAM_Wait(base, handle, &rngGenSeckey[0], kCAAM_Blocking);
    return status;
}

/*!
 * brief Reseed the CAAM RNG state handle
 *
 * This function reseeds the CAAM RNG state handle.
 * For a state handle in nondeterministic mode, the DRNG is seeded with 384 bits of
 * entropy from the TRNG and an optional 256-bit additional input from the descriptor
 * via the Class 1 Context Register.
 *
 * The function is blocking and returns after CAAM has processed the request.
 *
 * param base CAAM peripheral base address
 * param handle jobRing used for this request
 * param stateHandle RNG state handle to reseed
 * param additionalEntropy NULL or Pointer to optional 256-bit additional entropy.
 * return Status of the request
 */
status_t CAAM_RNG_Reseed(CAAM_Type *base,
                         caam_handle_t *handle,
                         caam_rng_state_handle_t stateHandle,
                         caam_rng_generic256_t additionalEntropy)
{
    status_t status;

    /* create job descriptor */
    caam_desc_rng_t rngReseed = {0};
    rngReseed[0]              = 0xB0800004u; /* HEADER */
    rngReseed[1]              = 0x12200020u; /* LOAD 32 bytes of  to Class 1 Context Register. Offset 0 bytes. */
    rngReseed[2]              = ADD_OFFSET((uint32_t)additionalEntropy);
    rngReseed[3]              = 0x8250000Au; /* ALG OPERATION: RNG reseed state handle (AS=10 Reseed) */

    /* optional additional input included */
    if ((additionalEntropy) != NULL)
    {
        rngReseed[3] |= (uint32_t)1u << 11; /* set AI bit in ALG OPERATION */
    }
    else
    {
        rngReseed[1] = DESC_JUMP_2; /* jump to current index + 2 (=3) */
    }

    /* select state handle */
    if (kCAAM_RngStateHandle1 == stateHandle)
    {
        rngReseed[3] |= 1u << 4;
    }

    /* schedule the job and block wait for result */
    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &rngReseed[0]);
    } while (status != kStatus_Success);

    status = CAAM_Wait(base, handle, &rngReseed[0], kCAAM_Blocking);
    return status;
}

/*!
 * brief Get random data
 *
 * This function gets random data from CAAM RNG.
 *
 * The function is blocking and returns after CAAM has generated the requested data or an error occurred.
 *
 * param base CAAM peripheral base address
 * param handle jobRing used for this request
 * param stateHandle RNG state handle used to generate random data
 * param[out] data Pointer address used to store random data
 * param dataSize Size of the buffer pointed by the data parameter
 * param dataType Type of random data to be generated
 * param additionalEntropy NULL or Pointer to optional 256-bit additional entropy.
 * return Status of the request
 */
status_t CAAM_RNG_GetRandomData(CAAM_Type *base,
                                caam_handle_t *handle,
                                caam_rng_state_handle_t stateHandle,
                                uint8_t *data,
                                size_t dataSize,
                                caam_rng_random_type_t dataType,
                                caam_rng_generic256_t additionalEntropy)
{
    status_t status;

    do
    {
        status = CAAM_RNG_GetRandomDataNonBlocking(base, handle, stateHandle, descBuf, data, dataSize, dataType,
                                                   additionalEntropy);
    } while (status == kStatus_CAAM_Again);

    if (kStatus_Success != status)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)data, dataSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

static const uint32_t templateRng[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x12200020u, /* LOAD 32 bytes of  to Class 1 Context Register. Offset 0 bytes. */
    /* 02 */ 0x00000000u, /* place: additional input address */
    /* 03 */ 0x12820004u, /* LOAD Class 1 Data Size Register by IMM data */
    /* 04 */ 0x00000000u, /* place: data size to generate */
    /* 05 */ 0x82500000u, /* RNG generate */
    /* 06 */ 0x60700000u, /* FIFO STORE message */
    /* 07 */ 0x00000000u, /* place: destination address */
    /* 08 */ 0x00000000u, /* place: destination size */
};

/*!
 * brief Request random data
 *
 * This function schedules the request for random data from CAAM RNG.
 * Memory at memory pointers will be accessed by CAAM shortly after this function
 * returns, according to actual CAAM schedule.
 *
 * param base CAAM peripheral base address
 * param handle RNG handle used for this request
 * param stateHandle RNG state handle used to generate random data
 * param[out] descriptor memory for CAAM commands
 * param[out] data Pointer address used to store random data
 * param dataSize Size of the buffer pointed by the data parameter, in bytes.
 * param dataType Type of random data to be generated.
 * param additionalEntropy NULL or Pointer to optional 256-bit additional entropy.
 * return status of the request
 */
status_t CAAM_RNG_GetRandomDataNonBlocking(CAAM_Type *base,
                                           caam_handle_t *handle,
                                           caam_rng_state_handle_t stateHandle,
                                           caam_desc_rng_t descriptor,
                                           void *data,
                                           size_t dataSize,
                                           caam_rng_random_type_t dataType,
                                           caam_rng_generic256_t additionalEntropy)
{
    /* create job descriptor */
    BUILD_ASSURE(sizeof(templateRng) <= sizeof(caam_desc_rng_t), caam_desc_rng_t_size);
    uint32_t descriptorSize = ARRAY_SIZE(templateRng);

    (void)caam_memcpy(descriptor, templateRng, sizeof(templateRng));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);

    /* optional additional input included */
    if (additionalEntropy != NULL)
    {
        descriptor[2] = ADD_OFFSET((uint32_t)additionalEntropy);
        descriptor[5] |= (uint32_t)1U << 11; /* set AI bit in ALG OPERATION */
        descriptor[5] |= (uint32_t)1U << 1;  /* set PR bit in ALG OPERATION (entropy seed) */
    }
    else
    {
        descriptor[0] |= (uint32_t)3u << 16; /* start at index 3 */
    }

    descriptor[4] = dataSize; /* Generate OPERATION */
    descriptor[7] = ADD_OFFSET((uint32_t)(uint32_t *)data);
    descriptor[8] = dataSize; /* FIFO STORE */

    /* select state handle */
    if (kCAAM_RngStateHandle1 == stateHandle)
    {
        descriptor[5] |= 1u << 4;
    }

    /* configure type of data */
    if (dataType == kCAAM_RngDataNonZero)
    {
        descriptor[5] |= (uint32_t)1u << 8; /* set NZB bit in ALG OPERATION */
    }

    if (dataType == kCAAM_RngDataOddParity)
    {
        descriptor[5] |= (uint32_t)1u << 9; /* set OBP bit in ALG OPERATION */
    }

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*******************************************************************************
 * BLACK Code public
 ******************************************************************************/
static const uint32_t templateBlack[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x02000000u, /* KEY command of  to Class 1 Context Register. */
    /* 02 */ 0x00000000u, /* place: a pointer to the key to be loaded */
    /* 03 */ 0x62000000u, /* FIFO STORE message */
    /* 04 */ 0x00000000u, /* place: destination address */
};

/*!
 * brief Construct a black key
 *
 * This function constructs a job descriptor capable of performing
 * a key blackening operation on a plaintext secure memory resident object.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param data Pointer address used to pointed the plaintext.
 * param dataSize Size of the buffer pointed by the data parameter
 * param fifostType Type of AES-CBC or AEC-CCM to encrypt plaintext
 * param[out] blackdata Pointer address uses to pointed the black key
 * return Status of the request
 */

status_t CAAM_BLACK_GetKeyBlacken(CAAM_Type *base,
                                  caam_handle_t *handle,
                                  const uint8_t *data,
                                  size_t dataSize,
                                  caam_fifost_type_t fifostType,
                                  uint8_t *blackdata)
{
    status_t status = kStatus_Fail;

    caam_desc_key_black_t descriptor;

    /* create job descriptor */
    BUILD_ASSURE(sizeof(templateBlack) <= sizeof(caam_desc_key_black_t), caam_desc_key_black_t_size);
    uint32_t descriptorSize = ARRAY_SIZE(templateBlack);

    (void)caam_memcpy(descriptor, templateBlack, sizeof(templateBlack));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    /* optional additional input included */
    descriptor[1] |= dataSize;
    descriptor[2] = ADD_OFFSET((uint32_t)data);

    descriptor[3] |= ((uint32_t)fifostType << 16) | (dataSize & DESC_PAYLOAD_SIZE_MASK);
    descriptor[4] = ADD_OFFSET((uint32_t)blackdata);

    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
    } while (status == kStatus_CAAM_Again);

    if (kStatus_Success != status)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descriptor, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)blackdata, dataSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*******************************************************************************
 * Key blob Code public
 ******************************************************************************/

static const uint32_t templateBlob[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x04000000u, /* KEY command to Class 2 Context Register, 64/128bits RNG KEY. */
    /* 02 */ 0x00000000u, /* place: a pointer to the key to be loaded */
    /* 03 */ 0xF0000000u, /* SEQ IN PTR command to load plain data or key blob depending on operation */
    /* 04 */ 0x00000000u, /* place: a pointer to plain data/ key blob to be loaded */
    /* 05 */ 0xF8000000u, /* SEQ OUT PTR command to store blob datas */
    /* 06 */ 0x00000000u, /* place: a pointer to blob data or plain data to be stored depending on operation*/
    /* 07 */ 0x800D0000u, /* OPERATION:Encrypt/Decrypt BLOB  */
};

/*!
 * brief Construct a encrypted Red Blob
 *
 * This function constructs a job descriptor capable of performing
 * a encrypted blob operation on a plaintext object.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param keyModifier Address of the random key modifier generated by RNG
 * param keyModifierSize Size of keyModifier buffer in bytes
 * param data Data adress
 * param dataSize Size of the buffer pointed by the data parameter
 * param[out] blob_data Output blob data adress
 * return Status of the request
 */
status_t CAAM_RedBlob_Encapsule(CAAM_Type *base,
                                caam_handle_t *handle,
                                const uint8_t *keyModifier,
                                size_t keyModifierSize,
                                const uint8_t *data,
                                size_t dataSize,
                                uint8_t *blob_data)
{
    status_t status = kStatus_Fail;

    caam_desc_gen_enc_blob_t descriptor;
    size_t blob_size;

    /* output blob will have 32 bytes key blob in beginning and 16 bytes MAC identifier at end of data blob */
    blob_size = 32u + dataSize + 16u;

    /* Key modifier size must 8 bytes long when used Secure memory or 16bytes long when General memory is used*/
    if ((keyModifierSize != 8u) && (keyModifierSize != 16u))
    {
        return kStatus_InvalidArgument;
    }

    /* create job descriptor */
    BUILD_ASSURE(sizeof(templateBlob) <= sizeof(caam_desc_gen_enc_blob_t), caam_desc_gen_enc_blob_t_size);
    uint32_t descriptorSize = ARRAY_SIZE(templateBlob);
    (void)caam_memcpy(descriptor, templateBlob, sizeof(templateBlob));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
#if defined(KEYBLOB_USE_SECURE_MEMORY)
    descriptor[1] |= 8u; // KEY command to Class 2 Context Register,  64bits RNG KEY.
#else
    descriptor[1] |= 16u;         // KEY command to Class 2 Context Register, 128bits RNG KEY.
#endif                                                 /* (KEYBLOB_USE_SECURE_MEMORY) */
    descriptor[2] = ADD_OFFSET((uint32_t)keyModifier); // Key modifier adress
    descriptor[3] |= dataSize;                         // SEQ IN PTR command to load plain data
    descriptor[4] = ADD_OFFSET((uint32_t)data);        // Plain data adress
    descriptor[5] |= blob_size;                        // SEQ OUT PTR Set outputing key blob
    descriptor[6] = ADD_OFFSET((uint32_t)blob_data);   // Key blob adress
#if defined(KEYBLOB_USE_SECURE_MEMORY)
    descriptor[7] |= (7UL << 24) | SEC_MEM; // OPERATION:Encrypt Red Blob in secure memory
#else
    descriptor[7] |= (7UL << 24); // OPERATION:Encrypt Red Blob in normal memory
#endif /* (KEYBLOB_USE_SECURE_MEMORY) */

    // schedule the job and block wait for result
    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
    } while (status == kStatus_CAAM_Again);

    if (kStatus_Success != status)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descriptor, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)blob_data, blob_size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*! brief Decrypt red blob
 *
 * This function constructs a job descriptor capable of performing
 * decrypting red blob.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param keyModifier Address of the random key modifier generated by RNG
 * param keyModifierSize Size of keyModifier buffer in bytes
 * param blob_data Address of blob data
 * param[out] data Output data adress.
 * param dataSize Size of the buffer pointed by the data parameter in bytes
 * return Status of the request
 */

status_t CAAM_RedBlob_Decapsule(CAAM_Type *base,
                                caam_handle_t *handle,
                                const uint8_t *keyModifier,
                                size_t keyModifierSize,
                                const uint8_t *blob_data,
                                uint8_t *data,
                                size_t dataSize)
{
    status_t status = kStatus_Fail;

    size_t blob_size;
    caam_desc_gen_dep_blob_t descriptor;

    /* blob have 32 bytes key blob in beginning and 16 bytes MAC identifier at end of data blob */
    blob_size = 32u + dataSize + 16u;

    /* Key modifier size must 8 bytes long when used Secure memory or 16bytes long when General memory is used*/
    if ((keyModifierSize != 8u) && (keyModifierSize != 16u))
    {
        return kStatus_InvalidArgument;
    }

    /* create job descriptor */

    BUILD_ASSURE(sizeof(templateBlob) <= sizeof(caam_desc_gen_dep_blob_t), caam_desc_gen_dep_blob_t_size);
    uint32_t descriptorSize = ARRAY_SIZE(templateBlob);

    (void)caam_memcpy(descriptor, templateBlob, sizeof(templateBlob));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
#if defined(KEYBLOB_USE_SECURE_MEMORY)
    descriptor[1] |= 8u; // KEY command to Class 2 Context Register, 64bits RNG KEY.
#else
    descriptor[1] |= 16u;         // KEY command to Class 2 Context Register, 128bits RNG KEY.
#endif                                                 /* (KEYBLOB_USE_SECURE_MEMORY) */
    descriptor[2] = ADD_OFFSET((uint32_t)keyModifier); // Key modifier adress
    descriptor[3] |= blob_size;                        // SEQ IN PTR command to load blob data
    descriptor[4] = ADD_OFFSET((uint32_t)blob_data);   // Key blob adress
    descriptor[5] |= dataSize;                         // SEQ OUT PTR command to load plain data
    descriptor[6] = ADD_OFFSET((uint32_t)data);        // Plain data adress
#if defined(KEYBLOB_USE_SECURE_MEMORY)
    descriptor[7] |= (6UL << 24) | SEC_MEM; // OPERATION:Decrypt red blob in secure memory
#else
    descriptor[7] |= (6UL << 24); // OPERATION:Decrypt red blob in normal memory
#endif /* (KEYBLOB_USE_SECURE_MEMORY) */
    // schedule the job and block wait for result
    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
    } while (status == kStatus_CAAM_Again);

    if (kStatus_Success != status)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descriptor, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)data, dataSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Construct a encrypted  Black Blob
 *
 * This function constructs a job descriptor capable of performing
 * a encrypted blob operation on a plaintext object.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param keyModifier Address of the random key modifier generated by RNG
 * param keyModifierSize Size of keyModifier buffer in bytes
 * param data Data adress
 * param dataSize Size of the buffer pointed by the data parameter
 * param[out] blob_data Output blob data adress
 * param blackKeyType  Type of black key see enum caam_desc_type_t for more info
 * return Status of the request
 */
status_t CAAM_BlackBlob_Encapsule(CAAM_Type *base,
                                  caam_handle_t *handle,
                                  const uint8_t *keyModifier,
                                  size_t keyModifierSize,
                                  const uint8_t *data,
                                  size_t dataSize,
                                  uint8_t *blob_data,
                                  caam_desc_type_t blackKeyType)
{
    status_t status = kStatus_Fail;

    caam_desc_gen_enc_blob_t descriptor;
    size_t blob_size;

    /* output blob will have 32 bytes key blob in beginning and 16 bytes MAC identifier at end of data blob */
    blob_size = 32u + dataSize + 16u;

    /* Key modifier size must 8 bytes long when used Secure memory or 16bytes long when General memory is used*/
    if ((keyModifierSize != 8u) && (keyModifierSize != 16u))
    {
        return kStatus_InvalidArgument;
    }

    /* create job descriptor */
    BUILD_ASSURE(sizeof(templateBlob) <= sizeof(caam_desc_gen_enc_blob_t), caam_desc_gen_enc_blob_t);
    uint32_t descriptorSize = ARRAY_SIZE(templateBlob);

    (void)caam_memcpy(descriptor, templateBlob, sizeof(templateBlob));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
#if defined(KEYBLOB_USE_SECURE_MEMORY)
    descriptor[1] |= 8u; // KEY command to Class 2 Context Register, 64bits RNG KEY.
#else
    descriptor[1] |= 16u;         // KEY command to Class 2 Context Register, 128bits RNG KEY.
#endif                                                 /* (KEYBLOB_USE_SECURE_MEMORY) */
    descriptor[2] = ADD_OFFSET((uint32_t)keyModifier); // Key modifier adress
    descriptor[3] |= dataSize;                         // SEQ IN PTR command to load plain data
    descriptor[4] = ADD_OFFSET((uint32_t)data);        // Plain data adress
    descriptor[5] |= blob_size;                        // Key blob adress
    descriptor[6] = ADD_OFFSET((uint32_t)blob_data);   // Key blob adress
#if defined(KEYBLOB_USE_SECURE_MEMORY)
    descriptor[7] |= (7UL << 24) | ((uint32_t)blackKeyType << 8) | DESC_BLACKKEY_NOMMEN |
                     SEC_MEM; // OPERATION:Encrypt black blob in secure memory
#else
    descriptor[7] |= (7UL << 24) | ((uint32_t)blackKeyType << 8) |
                     DESC_BLACKKEY_NOMMEN; // OPERATION:Encrypt black blob in normal memory
#endif /* (KEYBLOB_USE_SECURE_MEMORY) */

    // schedule the job and block wait for result
    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
    } while (status == kStatus_CAAM_Again);

    if (kStatus_Success != status)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descriptor, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)blob_data, blob_size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*! brief Construct a decrypted black blob
 *
 * This function constructs a job descriptor capable of performing
 * decrypting black blob.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param keyModifier Address of the random key modifier generated by RNG
 * param keyModifierSize Size of keyModifier buffer in bytes
 * param blob_data Address of blob data
 * param[out] data Output data adress.
 * param dataSize Size of the buffer pointed by the data parameter in bytes
 * param blackKeyType   Type of black key see enum caam_desc_type_t for more info
 * return Status of the request
 */

status_t CAAM_BlackBlob_Decapsule(CAAM_Type *base,
                                  caam_handle_t *handle,
                                  const uint8_t *keyModifier,
                                  size_t keyModifierSize,
                                  const uint8_t *blob_data,
                                  uint8_t *data,
                                  size_t dataSize,
                                  caam_desc_type_t blackKeyType)
{
    status_t status = kStatus_Fail;

    caam_desc_gen_dep_blob_t descriptor;
    size_t blob_size;

    /* blob have 32 bytes key blob in beginning and 16 bytes MAC identifier at end of data blob */
    blob_size = 32u + dataSize + 16u;

    /* Key modifier size must 8 bytes long when used Secure memory or 16bytes long when General memory is used*/
    if ((keyModifierSize != 8u) && (keyModifierSize != 16u))
    {
        return kStatus_InvalidArgument;
    }

    /* create job descriptor */
    BUILD_ASSURE(sizeof(templateBlob) <= sizeof(caam_desc_gen_dep_blob_t), caam_desc_gen_dep_blob_t_size);
    uint32_t descriptorSize = ARRAY_SIZE(templateBlob);

    (void)caam_memcpy(descriptor, templateBlob, sizeof(templateBlob));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
#if defined(KEYBLOB_USE_SECURE_MEMORY)
    descriptor[1] |= 8u; // KEY command to Class 2 Context Register, 64bits RNG KEY.
#else
    descriptor[1] |= 16u;                  // KEY command to Class 2 Context Register, 128bits RNG KEY.
#endif                                                 /* (KEYBLOB_USE_SECURE_MEMORY) */
    descriptor[2] = ADD_OFFSET((uint32_t)keyModifier); // Key modifier adress
    descriptor[3] |= blob_size;                        // SEQ IN PTR command to load blob data
    descriptor[4] = ADD_OFFSET((uint32_t)blob_data);   // Key blob adress
    descriptor[5] |= dataSize;
    descriptor[6] = ADD_OFFSET((uint32_t)data); // Plain data adress
#if defined(KEYBLOB_USE_SECURE_MEMORY)
    descriptor[7] |= (6UL << 24) | ((uint32_t)blackKeyType << 8) | DESC_BLACKKEY_NOMMEN |
                     SEC_MEM; // OPERATION:Decrypt black blob in secure memory
#else
    descriptor[7] |= (6UL << 24) | ((uint32_t)blackKeyType << 8) |
                     DESC_BLACKKEY_NOMMEN; // OPERATION:Decrypt black blob in normal memory
#endif /* (KEYBLOB_USE_SECURE_MEMORY) */
    // schedule the job and block wait for result
    do
    {
        status = caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
    } while (status == kStatus_CAAM_Again);

    if (kStatus_Success != status)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descriptor, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)data, dataSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*******************************************************************************
 * DES Code public
 ******************************************************************************/
static const uint32_t templateCipherDes[] = {
    /* 00 */ 0xB0800000u, /* HEADER */
    /* 01 */ 0x02800000u, /* KEY Class 1 IMM */
    /* 02 */ 0x00000000u, /* IMM key1 0-3 */
    /* 03 */ 0x00000000u, /* IMM key1 4-8 */
    /* 04 */ 0x00000000u, /* IMM key2 0-3 */
    /* 05 */ 0x00000000u, /* IMM key2 4-8 */
    /* 06 */ 0x00000000u, /* IMM key3 0-3 */
    /* 07 */ 0x00000000u, /* IMM key3 4-8 */
    /* 08 */ 0x12200008u, /* LOAD 8 bytes of iv to Class 1 Context Register */
    /* 09 */ 0x00000000u, /* place: iv address */
    /* 10 */ 0x22130000u, /* FIFO LOAD Message */
    /* 11 */ 0x00000000u, /* place: source address */
    /* 12 */ 0x60300000u, /* FIFO STORE Message */
    /* 13 */ 0x00000000u, /* place: destination address */
    /* 14 */ 0x82200000u, /* OPERATION: DES Decrypt, AS = zeroes, AAI = zeroes (CTR) */
};

/*!
 * brief Encrypts DES using ECB block mode.
 *
 * Encrypts DES using ECB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key Input key to use for encryption
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES_EncryptEcb(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *plaintext,
                             uint8_t *ciphertext,
                             size_t size,
                             const uint8_t key[CAAM_DES_KEY_SIZE])
{
    caam_desc_cipher_des_t descBuf;
    status_t status;

    status = CAAM_DES_EncryptEcbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, key);
    if (status != 0)
    {
        return status;
    }
    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts DES using ECB block mode.
 *
 * Encrypts DES using ECB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key Input key to use for encryption
 * return Status from descriptor push
 */
status_t CAAM_DES_EncryptEcbNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_cipher_des_t descriptor,
                                        const uint8_t *plaintext,
                                        uint8_t *ciphertext,
                                        size_t size,
                                        const uint8_t key[CAAM_DES_KEY_SIZE])
{
    BUILD_ASSURE(sizeof(caam_desc_cipher_des_t) >= sizeof(templateCipherDes), caam_desc_cipher_des_t_size);
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key, CAAM_DES_KEY_SIZE);
    descriptor[4] = DESC_JUMP_6; /* ECB has no context, jump to currIdx+6 = 10 (FIFO LOAD) */
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= 0x201u; /* add ENC bit to specify Encrypt OPERATION, AAI = 20h */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts DES using ECB block mode.
 *
 * Decrypts DES using ECB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key Input key to use for decryption
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES_DecryptEcb(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *ciphertext,
                             uint8_t *plaintext,
                             size_t size,
                             const uint8_t key[CAAM_DES_KEY_SIZE])
{
    caam_desc_cipher_des_t descBuf;
    status_t status;

    status = CAAM_DES_DecryptEcbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, key);
    if (status != 0)
    {
        return status;
    }
    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts DES using ECB block mode.
 *
 * Decrypts DES using ECB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key Input key to use for decryption
 * return Status from descriptor push
 */
status_t CAAM_DES_DecryptEcbNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_cipher_des_t descriptor,
                                        const uint8_t *ciphertext,
                                        uint8_t *plaintext,
                                        size_t size,
                                        const uint8_t key[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key, CAAM_DES_KEY_SIZE);
    descriptor[4] = DESC_JUMP_6; /* ECB has no context, jump to currIdx+6 = 10 (FIFO LOAD) */
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeECB; /* AAI = 20h */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts DES using CBC block mode.
 *
 * Encrypts DES using CBC block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Ouput ciphertext
 * param size Size of input and output data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key Input key to use for encryption
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES_EncryptCbc(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *plaintext,
                             uint8_t *ciphertext,
                             size_t size,
                             const uint8_t iv[CAAM_DES_IV_SIZE],
                             const uint8_t key[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES_EncryptCbcNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts DES using CBC block mode.
 *
 * Encrypts DES using CBC block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Ouput ciphertext
 * param size Size of input and output data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key Input key to use for encryption
 * return Status from descriptor push
 */
status_t CAAM_DES_EncryptCbcNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_cipher_des_t descriptor,
                                        const uint8_t *plaintext,
                                        uint8_t *ciphertext,
                                        size_t size,
                                        const uint8_t iv[CAAM_DES_IV_SIZE],
                                        const uint8_t key[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key, CAAM_DES_KEY_SIZE);
    descriptor[4] = DESC_JUMP_4; /* context, jump to currIdx+4 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCBC; /* AAI = 10h */
    descriptor[14] |= 1u;                      /* add ENC bit to specify Encrypt OPERATION */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts DES using CBC block mode.
 *
 * Decrypts DES using CBC block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key Input key to use for decryption
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES_DecryptCbc(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *ciphertext,
                             uint8_t *plaintext,
                             size_t size,
                             const uint8_t iv[CAAM_DES_IV_SIZE],
                             const uint8_t key[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES_DecryptCbcNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts DES using CBC block mode.
 *
 * Decrypts DES using CBC block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key Input key to use for decryption
 * return Status from descriptor push
 */
status_t CAAM_DES_DecryptCbcNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_cipher_des_t descriptor,
                                        const uint8_t *ciphertext,
                                        uint8_t *plaintext,
                                        size_t size,
                                        const uint8_t iv[CAAM_DES_IV_SIZE],
                                        const uint8_t key[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key, CAAM_DES_KEY_SIZE);
    descriptor[4] = DESC_JUMP_4; /* context, jump to currIdx+4 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCBC; /* AAI = 10h */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts DES using CFB block mode.
 *
 * Encrypts DES using CFB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param size Size of input data in bytes
 * param iv Input initial block.
 * param key Input key to use for encryption
 * param[out] ciphertext Output ciphertext
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES_EncryptCfb(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *plaintext,
                             uint8_t *ciphertext,
                             size_t size,
                             const uint8_t iv[CAAM_DES_IV_SIZE],
                             const uint8_t key[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES_EncryptCfbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts DES using CFB block mode.
 *
 * Encrypts DES using CFB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param size Size of input data in bytes
 * param iv Input initial block.
 * param key Input key to use for encryption
 * param[out] ciphertext Output ciphertext
 * return Status from descriptor push
 */
status_t CAAM_DES_EncryptCfbNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_cipher_des_t descriptor,
                                        const uint8_t *plaintext,
                                        uint8_t *ciphertext,
                                        size_t size,
                                        const uint8_t iv[CAAM_DES_IV_SIZE],
                                        const uint8_t key[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key, CAAM_DES_KEY_SIZE);
    descriptor[4] = DESC_JUMP_4; /* context, jump to currIdx+4 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCFB; /* AAI = 30h = CFB */
    descriptor[14] |= 1u;                      /* add ENC bit to specify Encrypt OPERATION */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts DES using CFB block mode.
 *
 * Decrypts DES using CFB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input initial block.
 * param key Input key to use for decryption
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES_DecryptCfb(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *ciphertext,
                             uint8_t *plaintext,
                             size_t size,
                             const uint8_t iv[CAAM_DES_IV_SIZE],
                             const uint8_t key[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES_DecryptCfbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts DES using CFB block mode.
 *
 * Decrypts DES using CFB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input initial block.
 * param key Input key to use for decryption
 * return Status from descriptor push
 */
status_t CAAM_DES_DecryptCfbNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_cipher_des_t descriptor,
                                        const uint8_t *ciphertext,
                                        uint8_t *plaintext,
                                        size_t size,
                                        const uint8_t iv[CAAM_DES_IV_SIZE],
                                        const uint8_t key[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key, CAAM_DES_KEY_SIZE);
    descriptor[4] = DESC_JUMP_4; /* context, jump to currIdx+4 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCFB; /* AAI = 30h = CFB */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts DES using OFB block mode.
 *
 * Encrypts DES using OFB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key Input key to use for encryption
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES_EncryptOfb(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *plaintext,
                             uint8_t *ciphertext,
                             size_t size,
                             const uint8_t iv[CAAM_DES_IV_SIZE],
                             const uint8_t key[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES_EncryptOfbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts DES using OFB block mode.
 *
 * Encrypts DES using OFB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key Input key to use for encryption
 * return Status from descriptor push
 */
status_t CAAM_DES_EncryptOfbNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_cipher_des_t descriptor,
                                        const uint8_t *plaintext,
                                        uint8_t *ciphertext,
                                        size_t size,
                                        const uint8_t iv[CAAM_DES_IV_SIZE],
                                        const uint8_t key[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key, CAAM_DES_KEY_SIZE);
    descriptor[4] = DESC_JUMP_4; /* context, jump to currIdx+4 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= (uint32_t)kCAAM_ModeOFB; /* AAI = 40h = OFB */
    descriptor[14] |= 1u;                      /* add ENC bit to specify Encrypt OPERATION */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts DES using OFB block mode.
 *
 * Decrypts DES using OFB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key Input key to use for decryption
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES_DecryptOfb(CAAM_Type *base,
                             caam_handle_t *handle,
                             const uint8_t *ciphertext,
                             uint8_t *plaintext,
                             size_t size,
                             const uint8_t iv[CAAM_DES_IV_SIZE],
                             const uint8_t key[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES_DecryptOfbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts DES using OFB block mode.
 *
 * Decrypts DES using OFB block mode.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key Input key to use for decryption
 * return Status from descriptor push
 */
status_t CAAM_DES_DecryptOfbNonBlocking(CAAM_Type *base,
                                        caam_handle_t *handle,
                                        caam_desc_cipher_des_t descriptor,
                                        const uint8_t *ciphertext,
                                        uint8_t *plaintext,
                                        size_t size,
                                        const uint8_t iv[CAAM_DES_IV_SIZE],
                                        const uint8_t key[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key, CAAM_DES_KEY_SIZE);
    descriptor[4] = DESC_JUMP_4; /* context, jump to currIdx+4 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeOFB; /* AAI = 40h = OFB */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts triple DES using ECB block mode with two keys.
 *
 * Encrypts triple DES using ECB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES2_EncryptEcb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *plaintext,
                              uint8_t *ciphertext,
                              size_t size,
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    caam_desc_cipher_des_t descBuf;
    status_t status;

    status = CAAM_DES2_EncryptEcbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, key1, key2);
    if (status != 0)
    {
        return status;
    }
    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts triple DES using ECB block mode with two keys.
 *
 * Encrypts triple DES using ECB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES2_EncryptEcbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *plaintext,
                                         uint8_t *ciphertext,
                                         size_t size,
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 2U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    descriptor[6] = DESC_JUMP_4; /* ECB has no context, jump to currIdx+4 = 10 (FIFO LOAD) */
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= 0x201u;   /* add ENC bit to specify Encrypt OPERATION, AAI = 20h */
    descriptor[14] |= 0x10000U; /* 3DES */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts triple DES using ECB block mode with two keys.
 *
 * Decrypts triple DES using ECB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES2_DecryptEcb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *ciphertext,
                              uint8_t *plaintext,
                              size_t size,
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    caam_desc_cipher_des_t descBuf;
    status_t status;

    status = CAAM_DES2_DecryptEcbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, key1, key2);
    if (status != 0)
    {
        return status;
    }
    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts triple DES using ECB block mode with two keys.
 *
 * Decrypts triple DES using ECB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES2_DecryptEcbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *ciphertext,
                                         uint8_t *plaintext,
                                         size_t size,
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 2U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    descriptor[6] = DESC_JUMP_4; /* ECB has no context, jump to currIdx+4 = 10 (FIFO LOAD) */
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeECB; /* AAI = 20h */
    descriptor[14] |= 0x10000U;                /* 3DES */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts triple DES using CBC block mode with two keys.
 *
 * Encrypts triple DES using CBC block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES2_EncryptCbc(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *plaintext,
                              uint8_t *ciphertext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES2_EncryptCbcNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key1, key2);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts triple DES using CBC block mode with two keys.
 *
 * Encrypts triple DES using CBC block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES2_EncryptCbcNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *plaintext,
                                         uint8_t *ciphertext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 2U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    descriptor[6] = DESC_JUMP_2; /* context, jump to currIdx+2 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCBC; /* AAI = 10h */
    descriptor[14] |= 1u;                      /* add ENC bit to specify Encrypt OPERATION */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts triple DES using CBC block mode with two keys.
 *
 * Decrypts triple DES using CBC block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES2_DecryptCbc(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *ciphertext,
                              uint8_t *plaintext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES2_DecryptCbcNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key1, key2);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts triple DES using CBC block mode with two keys.
 *
 * Decrypts triple DES using CBC block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES2_DecryptCbcNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *ciphertext,
                                         uint8_t *plaintext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 2U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    descriptor[6] = DESC_JUMP_2; /* context, jump to currIdx+2 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCBC; /* AAI = 10h */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts triple DES using CFB block mode with two keys.
 *
 * Encrypts triple DES using CFB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input initial block.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES2_EncryptCfb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *plaintext,
                              uint8_t *ciphertext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES2_EncryptCfbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key1, key2);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts triple DES using CFB block mode with two keys.
 *
 * Encrypts triple DES using CFB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input initial block.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES2_EncryptCfbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *plaintext,
                                         uint8_t *ciphertext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 2U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    descriptor[6] = DESC_JUMP_2; /* context, jump to currIdx+2 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCFB; /* AAI = 30h = CFB */
    descriptor[14] |= 1u;                      /* add ENC bit to specify Encrypt OPERATION */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts triple DES using CFB block mode with two keys.
 *
 * Decrypts triple DES using CFB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input initial block.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES2_DecryptCfb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *ciphertext,
                              uint8_t *plaintext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES2_DecryptCfbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key1, key2);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts triple DES using CFB block mode with two keys.
 *
 * Decrypts triple DES using CFB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input initial block.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES2_DecryptCfbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *ciphertext,
                                         uint8_t *plaintext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 2U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    descriptor[6] = DESC_JUMP_2; /* context, jump to currIdx+2 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCFB; /* AAI = 30h = CFB */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts triple DES using OFB block mode with two keys.
 *
 * Encrypts triple DES using OFB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES2_EncryptOfb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *plaintext,
                              uint8_t *ciphertext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES2_EncryptOfbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key1, key2);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts triple DES using OFB block mode with two keys.
 *
 * Encrypts triple DES using OFB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES2_EncryptOfbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *plaintext,
                                         uint8_t *ciphertext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 2U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    descriptor[6] = DESC_JUMP_2; /* context, jump to currIdx+2 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= (uint32_t)kCAAM_ModeOFB; /* AAI = 40h = OFB */
    descriptor[14] |= 1u;                      /* add ENC bit to specify Encrypt OPERATION */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts triple DES using OFB block mode with two keys.
 *
 * Decrypts triple DES using OFB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES2_DecryptOfb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *ciphertext,
                              uint8_t *plaintext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status = CAAM_DES2_DecryptOfbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key1, key2);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts triple DES using OFB block mode with two keys.
 *
 * Decrypts triple DES using OFB block mode with two keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES2_DecryptOfbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *ciphertext,
                                         uint8_t *plaintext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 2U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    descriptor[6] = DESC_JUMP_2; /* context, jump to currIdx+2 = 8 (LOAD) */
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeOFB; /* AAI = 40h = OFB */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts triple DES using ECB block mode with three keys.
 *
 * Encrypts triple DES using ECB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES3_EncryptEcb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *plaintext,
                              uint8_t *ciphertext,
                              size_t size,
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE],
                              const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    caam_desc_cipher_des_t descBuf;
    status_t status;

    status = CAAM_DES3_EncryptEcbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, key1, key2, key3);
    if (status != 0)
    {
        return status;
    }
    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts triple DES using ECB block mode with three keys.
 *
 * Encrypts triple DES using ECB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES3_EncryptEcbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *plaintext,
                                         uint8_t *ciphertext,
                                         size_t size,
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE],
                                         const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 3U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[6], (const uint32_t *)(uintptr_t)key3, CAAM_DES_KEY_SIZE);
    descriptor[8] = DESC_JUMP_2; /* ECB has no context, jump to currIdx+2 = 10 (FIFO LOAD) */
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= 0x201u;   /* add ENC bit to specify Encrypt OPERATION, AAI = 20h */
    descriptor[14] |= 0x10000U; /* 3DES */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts triple DES using ECB block mode with three keys.
 *
 * Decrypts triple DES using ECB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES3_DecryptEcb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *ciphertext,
                              uint8_t *plaintext,
                              size_t size,
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE],
                              const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    caam_desc_cipher_des_t descBuf;
    status_t status;

    status = CAAM_DES3_DecryptEcbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, key1, key2, key3);
    if (status != 0)
    {
        return status;
    }
    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts triple DES using ECB block mode with three keys.
 *
 * Decrypts triple DES using ECB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes. Must be multiple of 8 bytes.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES3_DecryptEcbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *ciphertext,
                                         uint8_t *plaintext,
                                         size_t size,
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE],
                                         const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 3U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[6], (const uint32_t *)(uintptr_t)key3, CAAM_DES_KEY_SIZE);
    descriptor[8] = DESC_JUMP_2; /* ECB has no context, jump to currIdx+2 = 10 (FIFO LOAD) */
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeECB; /* AAI = 20h */
    descriptor[14] |= 0x10000U;                /* 3DES */

    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts triple DES using CBC block mode with three keys.
 *
 * Encrypts triple DES using CBC block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES3_EncryptCbc(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *plaintext,
                              uint8_t *ciphertext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE],
                              const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status =
            CAAM_DES3_EncryptCbcNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key1, key2, key3);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts triple DES using CBC block mode with three keys.
 *
 * Encrypts triple DES using CBC block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES3_EncryptCbcNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *plaintext,
                                         uint8_t *ciphertext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE],
                                         const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 3U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[6], (const uint32_t *)(uintptr_t)key3, CAAM_DES_KEY_SIZE);
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCBC; /* AAI = 10h */
    descriptor[14] |= 1u;                      /* add ENC bit to specify Encrypt OPERATION */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts triple DES using CBC block mode with three keys.
 *
 * Decrypts triple DES using CBC block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES3_DecryptCbc(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *ciphertext,
                              uint8_t *plaintext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE],
                              const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status =
            CAAM_DES3_DecryptCbcNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key1, key2, key3);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts triple DES using CBC block mode with three keys.
 *
 * Decrypts triple DES using CBC block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input initial vector to combine with the first plaintext block.
 *           The iv does not need to be secret, but it must be unpredictable.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES3_DecryptCbcNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *ciphertext,
                                         uint8_t *plaintext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE],
                                         const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 3U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[6], (const uint32_t *)(uintptr_t)key3, CAAM_DES_KEY_SIZE);
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCBC; /* AAI = 10h */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts triple DES using CFB block mode with three keys.
 *
 * Encrypts triple DES using CFB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and ouput data in bytes
 * param iv Input initial block.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES3_EncryptCfb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *plaintext,
                              uint8_t *ciphertext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE],
                              const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status =
            CAAM_DES3_EncryptCfbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key1, key2, key3);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts triple DES using CFB block mode with three keys.
 *
 * Encrypts triple DES using CFB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and ouput data in bytes
 * param iv Input initial block.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES3_EncryptCfbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *plaintext,
                                         uint8_t *ciphertext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE],
                                         const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 3U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[6], (const uint32_t *)(uintptr_t)key3, CAAM_DES_KEY_SIZE);
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCFB; /* AAI = 30h = CFB */
    descriptor[14] |= 1u;                      /* add ENC bit to specify Encrypt OPERATION */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts triple DES using CFB block mode with three keys.
 *
 * Decrypts triple DES using CFB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input data in bytes
 * param iv Input initial block.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES3_DecryptCfb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *ciphertext,
                              uint8_t *plaintext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE],
                              const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status =
            CAAM_DES3_DecryptCfbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key1, key2, key3);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts triple DES using CFB block mode with three keys.
 *
 * Decrypts triple DES using CFB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input data in bytes
 * param iv Input initial block.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES3_DecryptCfbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *ciphertext,
                                         uint8_t *plaintext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE],
                                         const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 3U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[6], (const uint32_t *)(uintptr_t)key3, CAAM_DES_KEY_SIZE);
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeCFB; /* AAI = 30h = CFB */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Encrypts triple DES using OFB block mode with three keys.
 *
 * Encrypts triple DES using OFB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES3_EncryptOfb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *plaintext,
                              uint8_t *ciphertext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE],
                              const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status =
            CAAM_DES3_EncryptOfbNonBlocking(base, handle, descBuf, plaintext, ciphertext, size, iv, key1, key2, key3);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)ciphertext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Encrypts triple DES using OFB block mode with three keys.
 *
 * Encrypts triple DES using OFB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param plaintext Input plaintext to encrypt
 * param[out] ciphertext Output ciphertext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES3_EncryptOfbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *plaintext,
                                         uint8_t *ciphertext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE],
                                         const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 3U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[6], (const uint32_t *)(uintptr_t)key3, CAAM_DES_KEY_SIZE);
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[14] |= (uint32_t)kCAAM_ModeOFB; /* AAI = 40h = OFB */
    descriptor[14] |= 1u;                      /* add ENC bit to specify Encrypt OPERATION */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * brief Decrypts triple DES using OFB block mode with three keys.
 *
 * Decrypts triple DES using OFB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from encrypt/decrypt operation
 */
status_t CAAM_DES3_DecryptOfb(CAAM_Type *base,
                              caam_handle_t *handle,
                              const uint8_t *ciphertext,
                              uint8_t *plaintext,
                              size_t size,
                              const uint8_t iv[CAAM_DES_IV_SIZE],
                              const uint8_t key1[CAAM_DES_KEY_SIZE],
                              const uint8_t key2[CAAM_DES_KEY_SIZE],
                              const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    status_t status;
    caam_desc_cipher_des_t descBuf;

    do
    {
        status =
            CAAM_DES3_DecryptOfbNonBlocking(base, handle, descBuf, ciphertext, plaintext, size, iv, key1, key2, key3);
    } while (status == kStatus_CAAM_Again);

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)plaintext, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Decrypts triple DES using OFB block mode with three keys.
 *
 * Decrypts triple DES using OFB block mode with three keys.
 *
 * param base CAAM peripheral base address
 * param handle Handle used for this request. Specifies jobRing.
 * param[out] descriptor memory for CAAM commands
 * param ciphertext Input ciphertext to decrypt
 * param[out] plaintext Output plaintext
 * param size Size of input and output data in bytes
 * param iv Input unique input vector. The OFB mode requires that the IV be unique
 *           for each execution of the mode under the given key.
 * param key1 First input key for key bundle
 * param key2 Second input key for key bundle
 * param key3 Third input key for key bundle
 * return Status from descriptor push
 */
status_t CAAM_DES3_DecryptOfbNonBlocking(CAAM_Type *base,
                                         caam_handle_t *handle,
                                         caam_desc_cipher_des_t descriptor,
                                         const uint8_t *ciphertext,
                                         uint8_t *plaintext,
                                         size_t size,
                                         const uint8_t iv[CAAM_DES_IV_SIZE],
                                         const uint8_t key1[CAAM_DES_KEY_SIZE],
                                         const uint8_t key2[CAAM_DES_KEY_SIZE],
                                         const uint8_t key3[CAAM_DES_KEY_SIZE])
{
    uint32_t descriptorSize = ARRAY_SIZE(templateCipherDes);

    /* DES do not support EXTENDED lenght in FIFO LOAD/STORE command.
     * Data lenght limit is 2^16 bytes = 65 536 bytes.
     * Note: You can still call several times instead
     */
    if (size > 0xFFFFUL)
    {
        return kStatus_CAAM_DataOverflow;
    }

    (void)caam_memcpy(descriptor, templateCipherDes, sizeof(templateCipherDes));
    descriptor[0] |= (descriptorSize & DESC_SIZE_MASK);
    descriptor[1] |= 3U * CAAM_DES_KEY_SIZE;
    (void)caam_memcpy(&descriptor[2], (const uint32_t *)(uintptr_t)key1, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[4], (const uint32_t *)(uintptr_t)key2, CAAM_DES_KEY_SIZE);
    (void)caam_memcpy(&descriptor[6], (const uint32_t *)(uintptr_t)key3, CAAM_DES_KEY_SIZE);
    descriptor[9] = ADD_OFFSET((uint32_t)iv);
    descriptor[10] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[11] = ADD_OFFSET((uint32_t)ciphertext);
    descriptor[12] |= (size & DESC_PAYLOAD_SIZE_MASK);
    descriptor[13] = ADD_OFFSET((uint32_t)plaintext);
    descriptor[14] |= (uint32_t)kCAAM_ModeOFB; /* AAI = 40h = OFB */
    descriptor[14] |= 0x10000U;                /* 3DES */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

#define DESC_HEADER                           0xB0800000u
#define DESC_HEADER_ADD_DESCLEN(cmdWord, len) ((cmdWord) |= (len))

#define DESC_FLOADA                  0x220C0000u
#define DESC_FLOADB                  0x220D0000u
#define DESC_FLOADN                  0x22080000u
#define DESC_KEY_E_                  0x02010000u
#define DESC_STOREB                  0x600D0000u
#define DESC_STORE_                  0x52110004u
#define DESC_ADD_LEN(cmdWord, len)   ((cmdWord) |= (len))
#define DESC_SET_ADDR(cmdWord, addr) ((cmdWord) = ADD_OFFSET((uint32_t)(addr)))

#define DESC_FLOADA0 0x22000000u
#define DESC_FLOADA1 0x22010000u
#define DESC_FLOADA3 0x22030000u
#define DESC_FLOADB0 0x22040000u
#define DESC_FLOADB1 0x22050000u
#define DESC_FLOADB2 0x22060000u
#define DESC_FLOADB3 0x22070000u
#define DESC_STOREB1 0x60050000u
#define DESC_STOREB2 0x60060000u

static const uint32_t templateArithmeticPKHA[] = {
    /* 00 */ DESC_HEADER, /* HEADER */
    /* 01 */ 0x81800001u, /* OPERATION: PKHA OPERATION: clear memory function. */
    /* 02 */ 0xA2000001u, /* JMP always to next command. Done checkpoint (wait for Class 1 Done) */
    /* 03 */ DESC_FLOADN, /* FIFO LOAD PKHA N */
    /* 04 */ 0x00000000u, /* place: N address */
    /* 05 */ DESC_FLOADA, /* FIFO LOAD PKHA A */
    /* 06 */ 0x00000000u, /* place: A address */
    /* 07 */ DESC_FLOADB, /* FIFO LOAD PKHA B */
    /* 08 */ 0x00000000u, /* place: B address */
    /* 09 */ DESC_KEY_E_, /* KEY PKHA E */
    /* 10 */ 0x00000000u, /* place: E address */
    /* 11 */ 0x81800000u, /* OPERATION: PKHA OPERATION: Arithmetic Functions. */
    /* 12 */ DESC_STOREB, /* FIFO STORE PKHA B */
    /* 13 */ 0x00000000u, /* place: result address */
};

/*! @brief PKHA functions - arithmetic, copy/clear memory. */
typedef enum _caam_pkha_func_t
{
    kCAAM_PKHA_ClearMem           = 1U,
    kCAAM_PKHA_ArithModAdd        = 2U,  /*!< (A + B) mod N */
    kCAAM_PKHA_ArithModSub1       = 3U,  /*!< (A - B) mod N */
    kCAAM_PKHA_ArithModSub2       = 4U,  /*!< (B - A) mod N */
    kCAAM_PKHA_ArithModMul        = 5U,  /*!< (A x B) mod N */
    kCAAM_PKHA_ArithModExp        = 6U,  /*!< (A^E) mod N */
    kCAAM_PKHA_ArithModRed        = 7U,  /*!< (A) mod N */
    kCAAM_PKHA_ArithModInv        = 8U,  /*!< (A^-1) mod N */
    kCAAM_PKHA_ArithEccAdd        = 9U,  /*!< (P1 + P2) */
    kCAAM_PKHA_ArithEccDouble     = 10U, /*!< (P2 + P2) */
    kCAAM_PKHA_ArithEccMul        = 11U, /*!< (E x P1) */
    kCAAM_PKHA_ArithModR2         = 12U, /*!< (R^2 mod N) */
    kCAAM_PKHA_ArithGcd           = 14U, /*!< GCD (A, N) */
    kCAAM_PKHA_ArithPrimalityTest = 15U, /*!< Miller-Rabin */
    kCAAM_PKHA_CopyMemSizeN       = 16U,
    kCAAM_PKHA_CopyMemSizeSrc     = 17U,
} caam_pkha_func_t;

/*! @brief Register areas for PKHA clear memory operations. */
typedef enum _caam_pkha_reg_area
{
    kCAAM_PKHA_RegA   = 8U,
    kCAAM_PKHA_RegB   = 4U,
    kCAAM_PKHA_RegE   = 2U,
    kCAAM_PKHA_RegN   = 1U,
    kCAAM_PKHA_RegAll = kCAAM_PKHA_RegA | kCAAM_PKHA_RegB | kCAAM_PKHA_RegE | kCAAM_PKHA_RegN,
} caam_pkha_reg_area_t;

/*! @brief Quadrant areas for 4096-bit registers for PKHA copy memory
 * operations. */
typedef enum _caam_pkha_quad_area_t
{
    kCAAM_PKHA_Quad0 = 0U,
    kCAAM_PKHA_Quad1 = 1U,
    kCAAM_PKHA_Quad2 = 2U,
    kCAAM_PKHA_Quad3 = 3U,
} caam_pkha_quad_area_t;

/*! @brief User-supplied (R^2 mod N) input or CAAM should calculate. */
typedef enum _caam_pkha_r2_t
{
    kCAAM_PKHA_CalcR2  = 0U, /*!< Calculate (R^2 mod N) */
    kCAAM_PKHA_InputR2 = 1U  /*!< (R^2 mod N) supplied as input */
} caam_pkha_r2_t;

/*! @brief CAAM PKHA parameters */
typedef struct _caam_pkha_mode_params_t
{
    caam_pkha_func_t func;
    caam_pkha_f2m_t arithType;
    caam_pkha_montgomery_form_t montFormIn;
    caam_pkha_montgomery_form_t montFormOut;
    caam_pkha_reg_area_t srcReg;
    caam_pkha_quad_area_t srcQuad;
    caam_pkha_reg_area_t dstReg;
    caam_pkha_quad_area_t dstQuad;
    caam_pkha_timing_t equalTime;
    caam_pkha_r2_t r2modn;
} caam_pkha_mode_params_t;

static void caam_pkha_default_parms(caam_pkha_mode_params_t *params)
{
    params->func        = (caam_pkha_func_t)0;
    params->arithType   = kCAAM_PKHA_IntegerArith;
    params->montFormIn  = kCAAM_PKHA_NormalValue;
    params->montFormOut = kCAAM_PKHA_NormalValue;
    params->srcReg      = kCAAM_PKHA_RegAll;
    params->srcQuad     = kCAAM_PKHA_Quad0;
    params->dstReg      = kCAAM_PKHA_RegAll;
    params->dstQuad     = kCAAM_PKHA_Quad0;
    params->equalTime   = kCAAM_PKHA_NoTimingEqualized;
    params->r2modn      = kCAAM_PKHA_CalcR2;
}

static void caam_pkha_mode_set_src_reg_copy(uint32_t *outMode, caam_pkha_reg_area_t reg)
{
    int i = 0;

    do
    {
        reg = (caam_pkha_reg_area_t)(uint32_t)(((uint32_t)reg) >> 1u);
        i++;
    } while (0U != (uint32_t)reg);

    i = 4 - i;
    /* Source register must not be E. */
    if (i != 2)
    {
        *outMode |= ((uint32_t)i << 17u);
    }
}

static void caam_pkha_mode_set_dst_reg_copy(uint32_t *outMode, caam_pkha_reg_area_t reg)
{
    int i = 0;

    do
    {
        reg = (caam_pkha_reg_area_t)(uint32_t)(((uint32_t)reg) >> 1u);
        i++;
    } while (0U != (uint32_t)reg);

    i = 4 - i;
    *outMode |= ((uint32_t)i << 10u);
}

static void caam_pkha_mode_set_src_seg_copy(uint32_t *outMode, const caam_pkha_quad_area_t quad)
{
    *outMode |= ((uint32_t)quad << 8u);
}

static void caam_pkha_mode_set_dst_seg_copy(uint32_t *outMode, const caam_pkha_quad_area_t quad)
{
    *outMode |= ((uint32_t)quad << 6u);
}

static uint32_t caam_pkha_get_mode(const caam_pkha_mode_params_t *params)
{
    uint32_t modeReg;

    /* Set the PKHA algorithm and the appropriate function. */
    modeReg = (uint32_t)params->func;

    if ((params->func == kCAAM_PKHA_CopyMemSizeN) || (params->func == kCAAM_PKHA_CopyMemSizeSrc))
    {
        /* Set source and destination registers and quads. */
        caam_pkha_mode_set_src_reg_copy(&modeReg, params->srcReg);
        caam_pkha_mode_set_dst_reg_copy(&modeReg, params->dstReg);
        caam_pkha_mode_set_src_seg_copy(&modeReg, params->srcQuad);
        caam_pkha_mode_set_dst_seg_copy(&modeReg, params->dstQuad);
    }
    else
    {
        /* Set the arithmetic type - integer or binary polynomial (F2m). */
        modeReg |= ((uint32_t)params->arithType << 17u);

        /* Set to use Montgomery form of inputs and/or outputs. */
        modeReg |= ((uint32_t)params->montFormIn << 19u);
        modeReg |= ((uint32_t)params->montFormOut << 18u);

        /* Set to use pre-computed R2modN */
        modeReg |= ((uint32_t)params->r2modn << 16u);
    }

    modeReg |= ((uint32_t)params->equalTime << 10u);

    return modeReg;
}

enum _caam_user_specified_status
{
    /* the value below is used as LOCAL_OFFSET field for the JMP/HALT command, in which we test the PRM flag */
    kCAAM_UserSpecifiedStatus_NotPrime = 0x55u,

    /* the value below is returned in Job termination status word in case PrimalityTest result is NotPrime.
     */
    kCAAM_StatusNotPrime = 0x30000000u | kCAAM_UserSpecifiedStatus_NotPrime,
};

static status_t caam_pkha_algorithm_operation_command(CAAM_Type *base,
                                                      caam_handle_t *handle,
                                                      caam_desc_pkha_t descriptor,
                                                      const uint8_t *A,
                                                      size_t sizeA,
                                                      const uint8_t *B,
                                                      size_t sizeB,
                                                      const uint8_t *N,
                                                      size_t sizeN,
                                                      const uint8_t *E,
                                                      size_t sizeE,
                                                      caam_pkha_mode_params_t *params,
                                                      uint8_t *result,
                                                      size_t *resultSize)
{
    uint32_t clearMask      = 0;
    uint32_t descriptorSize = ARRAY_SIZE(templateArithmeticPKHA);
    BUILD_ASSURE(sizeof(caam_desc_pkha_t) >= sizeof(templateArithmeticPKHA), caam_desc_pkha_t_size_too_low);

    /* initialize descriptor from template */
    (void)caam_memcpy(descriptor, templateArithmeticPKHA, sizeof(templateArithmeticPKHA));

    /* add descriptor lenght in bytes to HEADER descriptor command */
    DESC_HEADER_ADD_DESCLEN(descriptor[0], descriptorSize);

    /* input data */
    if ((N != NULL) && (sizeN != 0U))
    {
        clearMask |= (uint32_t)1u << 16; /* add Nram bit to PKHA_MODE_MS */
        DESC_ADD_LEN(descriptor[3], sizeN);
        DESC_SET_ADDR(descriptor[4], N);
    }
    else
    {
        /* jump to descriptor[4] */
        descriptor[3] = DESC_JUMP_2; /* jump to current index + 2 (=4) */
    }

    if ((A != NULL) && (sizeA != 0U))
    {
        clearMask |= (uint32_t)1u << 19; /* add Aram bit to PKHA_MODE_MS */
        DESC_ADD_LEN(descriptor[5], sizeA);
        DESC_SET_ADDR(descriptor[6], A);
    }
    else
    {
        /* jump to descriptor[6] */
        descriptor[5] = DESC_JUMP_2; /* jump to current index + 2 (=6) */
    }

    if ((B != NULL) && (sizeB != 0U))
    {
        clearMask |= (uint32_t)1u << 18; /* add Bram bit to PKHA_MODE_MS */
        DESC_ADD_LEN(descriptor[7], sizeB);
        DESC_SET_ADDR(descriptor[8], B);
    }
    else
    {
        /* jump to descriptor[8] */
        descriptor[7] = DESC_JUMP_2; /* jump to current index + 2 (=8) */
    }

    if ((E != NULL) && (sizeE != 0U))
    {
        clearMask |= (uint32_t)1u << 17; /* add Eram bit to PKHA_MODE_MS */
        DESC_ADD_LEN(descriptor[9], sizeE);
        DESC_SET_ADDR(descriptor[10], E);
    }
    else
    {
        /* jump to descriptor[11] */
        descriptor[9] = DESC_JUMP_2; /* jump to current index + 2 (=11) */
    }

    /* add registers to clear into the pkha clear memory function */
    descriptor[1] |= clearMask;

    /* add functions details for pkha arithmetic functions */
    descriptor[11] |= caam_pkha_get_mode(params);

    /* RESULTS */
    if ((result != NULL) && (resultSize != NULL))
    {
        /* We don't know the size of result at this point. But, we know it will be <= modulus. */
        DESC_ADD_LEN(descriptor[12], sizeN);
        DESC_SET_ADDR(descriptor[13], result);
        *resultSize = sizeN;
    }
    else
    {
        /* special case for Primality Test - instead of reading result, check PRM bit and return user-specified status
         * if it is set. */
        /* conditional HALT, return user-specificed status if condition evaluated is true. this condition checks if (PRM
         * is false). */
        descriptor[12] = 0xA0C12000u;
        descriptor[12] |= (uint32_t)kCAAM_UserSpecifiedStatus_NotPrime;

        descriptor[13] = DESC_HALT; /* always halt with status 0x0 (normal) */
    }

    /* schedule the job */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

static const uint32_t templateArithmeticECC[] = {
    /* 00 */ DESC_HEADER,  /* HEADER */
    /* 01 */ 0x818F0001u,  /* OPERATION: PKHA OPERATION: clear memory function. Clear ABNE. */
    /* 02 */ 0xA2000001u,  /* JMP always to next command. Done checkpoint (wait for Class 1 Done) */
    /* 03 */ DESC_FLOADN,  /* FIFO LOAD PKHA N */
    /* 04 */ 0x00000000u,  /* place: N address */
    /* 05 */ DESC_FLOADA0, /* FIFO LOAD A0 */
    /* 06 */ 0x00000000u,  /* place: A0 address */
    /* 07 */ DESC_FLOADA1, /* FIFO LOAD A1 */
    /* 08 */ 0x00000000u,  /* place: A1 address */
    /* 09 */ DESC_FLOADA3, /* FIFO LOAD PKHA A3 */
    /* 10 */ 0x00000000u,  /* place: A3 address */
    /* 11 */ DESC_FLOADB0, /* FIFO LOAD PKHA B0 */
    /* 12 */ 0x00000000u,  /* place: B0 address */
    /* 13 */ DESC_FLOADB1, /* FIFO LOAD PKHA B1 */
    /* 14 */ 0x00000000u,  /* place: B1 address */
    /* 15 */ DESC_FLOADB2, /* FIFO LOAD PKHA B2 */
    /* 16 */ 0x00000000u,  /* place: B2 address */
    /* 17 */ DESC_FLOADB3, /* FIFO LOAD PKHA B3 */
    /* 18 */ 0x00000000u,  /* place: B3 address */
    /* 19 */ DESC_KEY_E_,  /* KEY PKHA E */
    /* 20 */ 0x00000000u,  /* place: E address */
    /* 21 */ 0x81800000u,  /* OPERATION: PKHA OPERATION: Arithmetic Functions. */
    /* 22 */ DESC_STOREB1, /* FIFO STORE PKHA B1 */
    /* 23 */ 0x00000000u,  /* place: result X address */
    /* 24 */ DESC_STOREB2, /* FIFO STORE PKHA B2 */
    /* 25 */ 0x00000000u,  /* place: result Y address */
};

static status_t caam_pkha_ecc_algorithm_operation_command(CAAM_Type *base,
                                                          caam_handle_t *handle,
                                                          caam_desc_pkha_ecc_t descriptor,
                                                          const caam_pkha_ecc_point_t *A,
                                                          const caam_pkha_ecc_point_t *B,
                                                          const uint8_t *E,
                                                          size_t sizeE,
                                                          const uint8_t *N,
                                                          const uint8_t *R2modN_B1,
                                                          const uint8_t *R2modN_B3,
                                                          const uint8_t *aCurveParam,
                                                          const uint8_t *bCurveParam,
                                                          size_t size,
                                                          caam_pkha_ecc_point_t *result,
                                                          caam_pkha_mode_params_t *params)
{
    uint32_t descriptorSize = ARRAY_SIZE(templateArithmeticECC);
    BUILD_ASSURE(sizeof(caam_desc_pkha_ecc_t) >= sizeof(templateArithmeticECC), caam_desc_pkha_ecc_t_size_too_low);

    /* initialize descriptor from template */
    (void)caam_memcpy(descriptor, templateArithmeticECC, sizeof(templateArithmeticECC));

    /* add descriptor lenght in bytes to HEADER descriptor command */
    DESC_HEADER_ADD_DESCLEN(descriptor[0], descriptorSize);

    /* N = modulus */
    DESC_ADD_LEN(descriptor[3], size);
    DESC_SET_ADDR(descriptor[4], N);

    /* [A0, A1] first point in affine coordinates */
    if (A != NULL)
    {
        DESC_ADD_LEN(descriptor[5], size);
        DESC_SET_ADDR(descriptor[6], A->X);
        DESC_ADD_LEN(descriptor[7], size);
        DESC_SET_ADDR(descriptor[8], A->Y);
    }
    else
    {
        /* jump to descriptor[9] */
        descriptor[5] = DESC_JUMP_4; /* jump to current index + 4 (=9) */
    }

    /* aCurveParam */
    DESC_ADD_LEN(descriptor[9], size);
    DESC_SET_ADDR(descriptor[10], aCurveParam);

    /* bCurveParam */
    DESC_ADD_LEN(descriptor[11], size);
    DESC_SET_ADDR(descriptor[12], bCurveParam);

    /* [B1, B2] second point in affine coordinates */
    if (B != NULL)
    {
        DESC_ADD_LEN(descriptor[13], size);
        DESC_SET_ADDR(descriptor[14], B->X);
        DESC_ADD_LEN(descriptor[15], size);
        DESC_SET_ADDR(descriptor[16], B->Y);
    }
    else if (R2modN_B1 != NULL) /* R2modN for ECC_MOD_MUL goes to B1 */
    {
        DESC_ADD_LEN(descriptor[13], size);
        DESC_SET_ADDR(descriptor[14], R2modN_B1);
        /* jump to descriptor[17] */
        descriptor[15] = DESC_JUMP_2; /* jump to current index + 2 (=17) */
    }
    else
    {
        /* jump to descriptor[17] */
        descriptor[13] = DESC_JUMP_4; /* jump to current index + 4 (=17) */
    }

    if (R2modN_B3 != NULL)
    {
        DESC_ADD_LEN(descriptor[17], size);
        DESC_SET_ADDR(descriptor[18], R2modN_B3);
    }
    else
    {
        /* jump to descriptor[19] */
        descriptor[17] = DESC_JUMP_2; /* jump to current index + 2 (=19) */
    }

    if ((E != NULL) && (sizeE != 0U))
    {
        DESC_ADD_LEN(descriptor[19], sizeE);
        DESC_SET_ADDR(descriptor[20], E);
    }
    else
    {
        /* jump to descriptor[21] */
        descriptor[19] = DESC_JUMP_2; /* jump to current index + 2 (=21) */
    }

    /* add functions details for pkha arithmetic functions */
    descriptor[21] |= caam_pkha_get_mode(params);

    /* store [B1, B2] result point */
    DESC_ADD_LEN(descriptor[22], size);
    DESC_SET_ADDR(descriptor[23], result->X);
    DESC_ADD_LEN(descriptor[24], size);
    DESC_SET_ADDR(descriptor[25], result->Y);

    /* schedule the job */
    return caam_in_job_ring_add(base, handle->jobRing, &descriptor[0]);
}

/*!
 * addtogroup caam_driver_pkha
 * {
 */

int CAAM_PKHA_CompareBigNum(const uint8_t *a, size_t sizeA, const uint8_t *b, size_t sizeB)
{
    int retval = 0;

    /* skip zero msbytes - integer a */
    while ((sizeA != 0U) && (0u == a[0]))
    {
        sizeA--;
        a++;
    }

    /* skip zero msbytes - integer b */
    while ((sizeB != 0U) && (0u == b[0]))
    {
        sizeB--;
        b++;
    }

    if (sizeA > sizeB)
    {
        retval = 1;
    } /* int a has more non-zero bytes, thus it is bigger than b */
    else if (sizeA < sizeB)
    {
        retval = -1;
    } /* int b has more non-zero bytes, thus it is bigger than a */
    else if (sizeA == 0U)
    {
        retval = 0;
    } /* sizeA = sizeB = 0 */
    else
    {
        int n;
        uint32_t equal;
        int val;

        n     = (int)sizeA - 1;
        equal = 0;

        /* compare all bytes - does not leak (in time domain) how many bytes equal */
        /* move from lsbyte to msbyte */
        while (n >= 0)
        {
            uint32_t chXor = ((uint32_t)a[n] ^ (uint32_t)b[n]);

            equal |= chXor;
            val = (int)chXor * ((int)a[n] - (int)b[n]);

            if (val < 0)
            {
                retval = -1;
            }

            if (val > 0)
            {
                retval = 1;
            }

            if (val == 0)
            {
                val = 1;
            }

            if (val != 0)
            {
                n--;
            }
        }

        if (0U == equal)
        {
            retval = 0;
        }
    }
    return (retval);
}

status_t CAAM_PKHA_ModAddNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *B,
                                     size_t sizeB,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType);

status_t CAAM_PKHA_ModAddNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *B,
                                     size_t sizeB,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType)
{
    caam_pkha_mode_params_t params;
    status_t status;

    if (arithType == kCAAM_PKHA_IntegerArith)
    {
        if (CAAM_PKHA_CompareBigNum(A, sizeA, N, sizeN) >= 0)
        {
            return (kStatus_InvalidArgument);
        }

        if (CAAM_PKHA_CompareBigNum(B, sizeB, N, sizeN) >= 0)
        {
            return (kStatus_InvalidArgument);
        }
    }

    caam_pkha_default_parms(&params);
    params.func      = kCAAM_PKHA_ArithModAdd;
    params.arithType = arithType;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, A, sizeA, B, sizeB, N, sizeN, NULL, 0,
                                                   &params, result, resultSize);
    return status;
}

/*!
 * brief Performs modular addition - (A + B) mod N.
 *
 * This function performs modular addition of (A + B) mod N, with either
 * integer or binary polynomial (F2m) inputs.  In the F2m form, this function is
 * equivalent to a bitwise XOR and it is functionally the same as subtraction.
 *
 * param base CAAM peripheral base address
 * param A first addend (integer or binary polynomial)
 * param sizeA Size of A in bytes
 * param B second addend (integer or binary polynomial)
 * param sizeB Size of B in bytes
 * param N modulus.
 * param sizeN Size of N in bytes.
 * param[out] result Output array to store result of operation
 * param[out] resultSize Output size of operation in bytes
 * param arithType Type of arithmetic to perform (integer or F2m)
 * return Operation status.
 */
status_t CAAM_PKHA_ModAdd(CAAM_Type *base,
                          caam_handle_t *handle,
                          const uint8_t *A,
                          size_t sizeA,
                          const uint8_t *B,
                          size_t sizeB,
                          const uint8_t *N,
                          size_t sizeN,
                          uint8_t *result,
                          size_t *resultSize,
                          caam_pkha_f2m_t arithType)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ModAddNonBlocking(base, handle, descBuf, A, sizeA, B, sizeB, N, sizeN, result, resultSize,
                                             arithType);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result, *resultSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ModSub1NonBlocking(CAAM_Type *base,
                                      caam_handle_t *handle,
                                      caam_desc_pkha_t descriptor,
                                      const uint8_t *A,
                                      size_t sizeA,
                                      const uint8_t *B,
                                      size_t sizeB,
                                      const uint8_t *N,
                                      size_t sizeN,
                                      uint8_t *result,
                                      size_t *resultSize);

status_t CAAM_PKHA_ModSub1NonBlocking(CAAM_Type *base,
                                      caam_handle_t *handle,
                                      caam_desc_pkha_t descriptor,
                                      const uint8_t *A,
                                      size_t sizeA,
                                      const uint8_t *B,
                                      size_t sizeB,
                                      const uint8_t *N,
                                      size_t sizeN,
                                      uint8_t *result,
                                      size_t *resultSize)
{
    caam_pkha_mode_params_t params;
    status_t status;

    if (CAAM_PKHA_CompareBigNum(A, sizeA, N, sizeN) >= 0)
    {
        return (kStatus_InvalidArgument);
    }

    if (CAAM_PKHA_CompareBigNum(B, sizeB, N, sizeN) >= 0)
    {
        return (kStatus_InvalidArgument);
    }

    caam_pkha_default_parms(&params);
    params.func = kCAAM_PKHA_ArithModSub1;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, A, sizeA, B, sizeB, N, sizeN, NULL, 0,
                                                   &params, result, resultSize);
    return status;
}

/*!
 * brief Performs modular subtraction - (A - B) mod N.
 *
 * This function performs modular subtraction of (A - B) mod N with
 * integer inputs.
 *
 * param base CAAM peripheral base address
 * param A first addend (integer or binary polynomial)
 * param sizeA Size of A in bytes
 * param B second addend (integer or binary polynomial)
 * param sizeB Size of B in bytes
 * param N modulus
 * param sizeN Size of N in bytes
 * param[out] result Output array to store result of operation
 * param[out] resultSize Output size of operation in bytes
 * return Operation status.
 */
status_t CAAM_PKHA_ModSub1(CAAM_Type *base,
                           caam_handle_t *handle,
                           const uint8_t *A,
                           size_t sizeA,
                           const uint8_t *B,
                           size_t sizeB,
                           const uint8_t *N,
                           size_t sizeN,
                           uint8_t *result,
                           size_t *resultSize)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ModSub1NonBlocking(base, handle, descBuf, A, sizeA, B, sizeB, N, sizeN, result, resultSize);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result, *resultSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ModSub2NonBlocking(CAAM_Type *base,
                                      caam_handle_t *handle,
                                      caam_desc_pkha_t descriptor,
                                      const uint8_t *A,
                                      size_t sizeA,
                                      const uint8_t *B,
                                      size_t sizeB,
                                      const uint8_t *N,
                                      size_t sizeN,
                                      uint8_t *result,
                                      size_t *resultSize);

status_t CAAM_PKHA_ModSub2NonBlocking(CAAM_Type *base,
                                      caam_handle_t *handle,
                                      caam_desc_pkha_t descriptor,
                                      const uint8_t *A,
                                      size_t sizeA,
                                      const uint8_t *B,
                                      size_t sizeB,
                                      const uint8_t *N,
                                      size_t sizeN,
                                      uint8_t *result,
                                      size_t *resultSize)
{
    caam_pkha_mode_params_t params;
    status_t status;

    caam_pkha_default_parms(&params);
    params.func = kCAAM_PKHA_ArithModSub2;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, A, sizeA, B, sizeB, N, sizeN, NULL, 0,
                                                   &params, result, resultSize);
    return status;
}

/*!
 * brief Performs modular subtraction - (B - A) mod N.
 *
 * This function performs modular subtraction of (B - A) mod N,
 * with integer inputs.
 *
 * param base CAAM peripheral base address
 * param A first addend (integer or binary polynomial)
 * param sizeA Size of A in bytes
 * param B second addend (integer or binary polynomial)
 * param sizeB Size of B in bytes
 * param N modulus
 * param sizeN Size of N in bytes
 * param[out] result Output array to store result of operation
 * param[out] resultSize Output size of operation in bytes
 * return Operation status.
 */
status_t CAAM_PKHA_ModSub2(CAAM_Type *base,
                           caam_handle_t *handle,
                           const uint8_t *A,
                           size_t sizeA,
                           const uint8_t *B,
                           size_t sizeB,
                           const uint8_t *N,
                           size_t sizeN,
                           uint8_t *result,
                           size_t *resultSize)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ModSub2NonBlocking(base, handle, descBuf, A, sizeA, B, sizeB, N, sizeN, result, resultSize);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result, *resultSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ModMulNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *B,
                                     size_t sizeB,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType,
                                     caam_pkha_montgomery_form_t montIn,
                                     caam_pkha_montgomery_form_t montOut,
                                     caam_pkha_timing_t equalTime);

status_t CAAM_PKHA_ModMulNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *B,
                                     size_t sizeB,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType,
                                     caam_pkha_montgomery_form_t montIn,
                                     caam_pkha_montgomery_form_t montOut,
                                     caam_pkha_timing_t equalTime)
{
    caam_pkha_mode_params_t params;
    status_t status;

    if (arithType == kCAAM_PKHA_IntegerArith)
    {
        if (CAAM_PKHA_CompareBigNum(A, sizeA, N, sizeN) >= 0)
        {
            return (kStatus_InvalidArgument);
        }

        if (CAAM_PKHA_CompareBigNum(B, sizeB, N, sizeN) >= 0)
        {
            return (kStatus_InvalidArgument);
        }
    }

    caam_pkha_default_parms(&params);
    params.func        = kCAAM_PKHA_ArithModMul;
    params.arithType   = arithType;
    params.montFormIn  = montIn;
    params.montFormOut = montOut;
    params.equalTime   = equalTime;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, A, sizeA, B, sizeB, N, sizeN, NULL, 0,
                                                   &params, result, resultSize);

    return status;
}

/*!
 * brief Performs modular multiplication - (A x B) mod N.
 *
 * This function performs modular multiplication with either integer or
 * binary polynomial (F2m) inputs.  It can optionally specify whether inputs
 * and/or outputs will be in Montgomery form or not.
 *
 * param base CAAM peripheral base address
 * param A first addend (integer or binary polynomial)
 * param sizeA Size of A in bytes
 * param B second addend (integer or binary polynomial)
 * param sizeB Size of B in bytes
 * param N modulus.
 * param sizeN Size of N in bytes
 * param[out] result Output array to store result of operation
 * param[out] resultSize Output size of operation in bytes
 * param arithType Type of arithmetic to perform (integer or F2m)
 * param montIn Format of inputs
 * param montOut Format of output
 * param equalTime Run the function time equalized or no timing equalization. This argument is ignored for F2m modular
 * multiplication.
 * return Operation status.
 */
status_t CAAM_PKHA_ModMul(CAAM_Type *base,
                          caam_handle_t *handle,
                          const uint8_t *A,
                          size_t sizeA,
                          const uint8_t *B,
                          size_t sizeB,
                          const uint8_t *N,
                          size_t sizeN,
                          uint8_t *result,
                          size_t *resultSize,
                          caam_pkha_f2m_t arithType,
                          caam_pkha_montgomery_form_t montIn,
                          caam_pkha_montgomery_form_t montOut,
                          caam_pkha_timing_t equalTime)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ModMulNonBlocking(base, handle, descBuf, A, sizeA, B, sizeB, N, sizeN, result, resultSize,
                                             arithType, montIn, montOut, equalTime);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result, *resultSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ModR2NonBlocking(CAAM_Type *base,
                                    caam_handle_t *handle,
                                    caam_desc_pkha_t descriptor,
                                    const uint8_t *N,
                                    size_t sizeN,
                                    uint8_t *result,
                                    size_t *resultSize,
                                    caam_pkha_f2m_t arithType);

status_t CAAM_PKHA_ModR2NonBlocking(CAAM_Type *base,
                                    caam_handle_t *handle,
                                    caam_desc_pkha_t descriptor,
                                    const uint8_t *N,
                                    size_t sizeN,
                                    uint8_t *result,
                                    size_t *resultSize,
                                    caam_pkha_f2m_t arithType)
{
    status_t status;
    caam_pkha_mode_params_t params;

    caam_pkha_default_parms(&params);
    params.func      = kCAAM_PKHA_ArithModR2;
    params.arithType = arithType;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, NULL, 0, NULL, 0, N, sizeN, NULL, 0,
                                                   &params, result, resultSize);
    return status;
}

/*!
 * brief Computes integer Montgomery factor R^2 mod N.
 *
 * This function computes a constant to assist in converting operands
 * into the Montgomery residue system representation.
 *
 * param base CAAM peripheral base address
 * param N modulus
 * param sizeN Size of N in bytes
 * param[out] result Output array to store result of operation
 * param[out] resultSize Output size of operation in bytes
 * param arithType Type of arithmetic to perform (integer or F2m)
 * return Operation status.
 */
status_t CAAM_PKHA_ModR2(CAAM_Type *base,
                         caam_handle_t *handle,
                         const uint8_t *N,
                         size_t sizeN,
                         uint8_t *result,
                         size_t *resultSize,
                         caam_pkha_f2m_t arithType)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ModR2NonBlocking(base, handle, descBuf, N, sizeN, result, resultSize, arithType);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result, *resultSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ModExpNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     const uint8_t *E,
                                     size_t sizeE,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType,
                                     caam_pkha_montgomery_form_t montIn,
                                     caam_pkha_timing_t equalTime);

status_t CAAM_PKHA_ModExpNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     const uint8_t *E,
                                     size_t sizeE,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType,
                                     caam_pkha_montgomery_form_t montIn,
                                     caam_pkha_timing_t equalTime)
{
    caam_pkha_mode_params_t params;
    status_t status;

    if (arithType == kCAAM_PKHA_IntegerArith)
    {
        if (CAAM_PKHA_CompareBigNum(A, sizeA, N, sizeN) >= 0)
        {
            return (kStatus_InvalidArgument);
        }
    }

    caam_pkha_default_parms(&params);
    params.func       = kCAAM_PKHA_ArithModExp;
    params.arithType  = arithType;
    params.montFormIn = montIn;
    params.equalTime  = equalTime;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, A, sizeA, NULL, 0, N, sizeN, E, sizeE,
                                                   &params, result, resultSize);
    return status;
}

/*!
 * brief Performs modular exponentiation - (A^E) mod N.
 *
 * This function performs modular exponentiation with either integer or
 * binary polynomial (F2m) inputs.
 *
 * param base CAAM peripheral base address
 * param A first addend (integer or binary polynomial)
 * param sizeA Size of A in bytes
 * param N modulus
 * param sizeN Size of N in bytes
 * param E exponent
 * param sizeE Size of E in bytes
 * param[out] result Output array to store result of operation
 * param[out] resultSize Output size of operation in bytes
 * param montIn Format of A input (normal or Montgomery)
 * param arithType Type of arithmetic to perform (integer or F2m)
 * param equalTime Run the function time equalized or no timing equalization.
 * return Operation status.
 */
status_t CAAM_PKHA_ModExp(CAAM_Type *base,
                          caam_handle_t *handle,
                          const uint8_t *A,
                          size_t sizeA,
                          const uint8_t *N,
                          size_t sizeN,
                          const uint8_t *E,
                          size_t sizeE,
                          uint8_t *result,
                          size_t *resultSize,
                          caam_pkha_f2m_t arithType,
                          caam_pkha_montgomery_form_t montIn,
                          caam_pkha_timing_t equalTime)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ModExpNonBlocking(base, handle, descBuf, A, sizeA, N, sizeN, E, sizeE, result, resultSize,
                                             arithType, montIn, equalTime);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result, *resultSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ModRedNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType);

status_t CAAM_PKHA_ModRedNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType)
{
    caam_pkha_mode_params_t params;
    status_t status;

    caam_pkha_default_parms(&params);
    params.func      = kCAAM_PKHA_ArithModRed;
    params.arithType = arithType;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, A, sizeA, NULL, 0, N, sizeN, NULL, 0,
                                                   &params, result, resultSize);
    return status;
}

/*!
 * brief Performs modular reduction - (A) mod N.
 *
 * This function performs modular reduction with either integer or
 * binary polynomial (F2m) inputs.
 *
 * param base CAAM peripheral base address
 * param A first addend (integer or binary polynomial)
 * param sizeA Size of A in bytes
 * param N modulus
 * param sizeN Size of N in bytes
 * param[out] result Output array to store result of operation
 * param[out] resultSize Output size of operation in bytes
 * param arithType Type of arithmetic to perform (integer or F2m)
 * return Operation status.
 */
status_t CAAM_PKHA_ModRed(CAAM_Type *base,
                          caam_handle_t *handle,
                          const uint8_t *A,
                          size_t sizeA,
                          const uint8_t *N,
                          size_t sizeN,
                          uint8_t *result,
                          size_t *resultSize,
                          caam_pkha_f2m_t arithType)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ModRedNonBlocking(base, handle, descBuf, A, sizeA, N, sizeN, result, resultSize, arithType);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result, *resultSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ModInvNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType);

status_t CAAM_PKHA_ModInvNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType)
{
    caam_pkha_mode_params_t params;
    status_t status;

    caam_pkha_default_parms(&params);
    params.func      = kCAAM_PKHA_ArithModInv;
    params.arithType = arithType;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, A, sizeA, NULL, 0, N, sizeN, NULL, 0,
                                                   &params, result, resultSize);
    return status;
}

/*!
 * brief Performs modular inversion - (A^-1) mod N.
 *
 * This function performs modular inversion with either integer or
 * binary polynomial (F2m) inputs.
 *
 * param base CAAM peripheral base address
 * param A first addend (integer or binary polynomial)
 * param sizeA Size of A in bytes
 * param N modulus
 * param sizeN Size of N in bytes
 * param[out] result Output array to store result of operation
 * param[out] resultSize Output size of operation in bytes
 * param arithType Type of arithmetic to perform (integer or F2m)
 * return Operation status.
 */
status_t CAAM_PKHA_ModInv(CAAM_Type *base,
                          caam_handle_t *handle,
                          const uint8_t *A,
                          size_t sizeA,
                          const uint8_t *N,
                          size_t sizeN,
                          uint8_t *result,
                          size_t *resultSize,
                          caam_pkha_f2m_t arithType)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ModInvNonBlocking(base, handle, descBuf, A, sizeA, N, sizeN, result, resultSize, arithType);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result, *resultSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ModGcdNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType);

status_t CAAM_PKHA_ModGcdNonBlocking(CAAM_Type *base,
                                     caam_handle_t *handle,
                                     caam_desc_pkha_t descriptor,
                                     const uint8_t *A,
                                     size_t sizeA,
                                     const uint8_t *N,
                                     size_t sizeN,
                                     uint8_t *result,
                                     size_t *resultSize,
                                     caam_pkha_f2m_t arithType)
{
    caam_pkha_mode_params_t params;
    status_t status;

    caam_pkha_default_parms(&params);
    params.func      = kCAAM_PKHA_ArithGcd;
    params.arithType = arithType;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, A, sizeA, NULL, 0, N, sizeN, NULL, 0,
                                                   &params, result, resultSize);
    return status;
}

/*!
 * brief Calculates the greatest common divisor - GCD (A, N).
 *
 * This function calculates the greatest common divisor of two inputs with
 * either integer or binary polynomial (F2m) inputs.
 *
 * param base CAAM peripheral base address
 * param A first value (must be smaller than or equal to N)
 * param sizeA Size of A in bytes
 * param N second value (must be non-zero)
 * param sizeN Size of N in bytes
 * param[out] result Output array to store result of operation
 * param[out] resultSize Output size of operation in bytes
 * param arithType Type of arithmetic to perform (integer or F2m)
 * return Operation status.
 */
status_t CAAM_PKHA_ModGcd(CAAM_Type *base,
                          caam_handle_t *handle,
                          const uint8_t *A,
                          size_t sizeA,
                          const uint8_t *N,
                          size_t sizeN,
                          uint8_t *result,
                          size_t *resultSize,
                          caam_pkha_f2m_t arithType)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ModGcdNonBlocking(base, handle, descBuf, A, sizeA, N, sizeN, result, resultSize, arithType);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result, *resultSize);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_PrimalityTestNonBlocking(CAAM_Type *base,
                                            caam_handle_t *handle,
                                            caam_desc_pkha_t descriptor,
                                            const uint8_t *A,
                                            size_t sizeA,
                                            const uint8_t *B,
                                            size_t sizeB,
                                            const uint8_t *N,
                                            size_t sizeN);

status_t CAAM_PKHA_PrimalityTestNonBlocking(CAAM_Type *base,
                                            caam_handle_t *handle,
                                            caam_desc_pkha_t descriptor,
                                            const uint8_t *A,
                                            size_t sizeA,
                                            const uint8_t *B,
                                            size_t sizeB,
                                            const uint8_t *N,
                                            size_t sizeN)
{
    caam_pkha_mode_params_t params;
    status_t status;

    caam_pkha_default_parms(&params);
    params.func = kCAAM_PKHA_ArithPrimalityTest;

    status = caam_pkha_algorithm_operation_command(base, handle, descriptor, A, sizeA, B, sizeB, N, sizeN, NULL, 0,
                                                   &params, NULL, NULL);
    return status;
}

/*!
 * brief Executes Miller-Rabin primality test.
 *
 * This function calculates whether or not a candidate prime number is likely
 * to be a prime.
 *
 * param base CAAM peripheral base address
 * param A initial random seed
 * param sizeA Size of A in bytes
 * param B number of trial runs
 * param sizeB Size of B in bytes
 * param N candidate prime integer
 * param sizeN Size of N in bytes
 * param[out] res True if the value is likely prime or false otherwise
 * return Operation status.
 */
status_t CAAM_PKHA_PrimalityTest(CAAM_Type *base,
                                 caam_handle_t *handle,
                                 const uint8_t *A,
                                 size_t sizeA,
                                 const uint8_t *B,
                                 size_t sizeB,
                                 const uint8_t *N,
                                 size_t sizeN,
                                 bool *res)
{
    caam_desc_pkha_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_PrimalityTestNonBlocking(base, handle, descBuf, A, sizeA, B, sizeB, N, sizeN);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);

    if (status == kStatus_Success)
    {
        /* this return code means that the candidate is believed to be prime. */
        *res = true;
    }
    /* clear DESC INDEX field in the Job termination status word and check if it is our NotPrime user specified status
     */
    else if (((uint32_t)status & 0xffff00ffu) == (uint32_t)kCAAM_StatusNotPrime)
    {
        /* change status to Ok to upper layer caller. this return code means that the candidate is believed to not being
         * prime. */
        status = kStatus_Success;
        *res   = false;
    }
    else
    {
        *res = false;
    }

    return status;
}

status_t CAAM_PKHA_ECC_PointAddNonBlocking(CAAM_Type *base,
                                           caam_handle_t *handle,
                                           caam_desc_pkha_ecc_t descriptor,
                                           const caam_pkha_ecc_point_t *A,
                                           const caam_pkha_ecc_point_t *B,
                                           const uint8_t *N,
                                           const uint8_t *R2modN,
                                           const uint8_t *aCurveParam,
                                           const uint8_t *bCurveParam,
                                           size_t size,
                                           caam_pkha_f2m_t arithType,
                                           caam_pkha_ecc_point_t *result);

status_t CAAM_PKHA_ECC_PointAddNonBlocking(CAAM_Type *base,
                                           caam_handle_t *handle,
                                           caam_desc_pkha_ecc_t descriptor,
                                           const caam_pkha_ecc_point_t *A,
                                           const caam_pkha_ecc_point_t *B,
                                           const uint8_t *N,
                                           const uint8_t *R2modN,
                                           const uint8_t *aCurveParam,
                                           const uint8_t *bCurveParam,
                                           size_t size,
                                           caam_pkha_f2m_t arithType,
                                           caam_pkha_ecc_point_t *result)
{
    caam_pkha_mode_params_t params;
    status_t status;

    caam_pkha_default_parms(&params);
    params.func      = kCAAM_PKHA_ArithEccAdd;
    params.arithType = arithType;
    params.r2modn    = (R2modN != NULL) ? kCAAM_PKHA_InputR2 : kCAAM_PKHA_CalcR2;

    status = caam_pkha_ecc_algorithm_operation_command(base, handle, descriptor, A, B, NULL, 0, N, NULL, R2modN,
                                                       aCurveParam, bCurveParam, size, result, &params);
    return status;
}

/*!
 * brief Adds elliptic curve points - A + B.
 *
 * This function performs ECC point addition over a prime field (Fp) or binary field (F2m) using
 * affine coordinates.
 *
 * param base CAAM peripheral base address
 * param A Left-hand point
 * param B Right-hand point
 * param N Prime modulus of the field
 * param R2modN NULL (the function computes R2modN internally) or pointer to pre-computed R2modN (obtained from
 *               CAAM_PKHA_ModR2() function).
 * param aCurveParam A parameter from curve equation
 * param bCurveParam B parameter from curve equation (constant)
 * param size Size in bytes of curve points and parameters
 * param arithType Type of arithmetic to perform (integer or F2m)
 * param[out] result Result point
 * return Operation status.
 */
status_t CAAM_PKHA_ECC_PointAdd(CAAM_Type *base,
                                caam_handle_t *handle,
                                const caam_pkha_ecc_point_t *A,
                                const caam_pkha_ecc_point_t *B,
                                const uint8_t *N,
                                const uint8_t *R2modN,
                                const uint8_t *aCurveParam,
                                const uint8_t *bCurveParam,
                                size_t size,
                                caam_pkha_f2m_t arithType,
                                caam_pkha_ecc_point_t *result)
{
    caam_desc_pkha_ecc_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ECC_PointAddNonBlocking(base, handle, descBuf, A, B, N, R2modN, aCurveParam, bCurveParam,
                                                   size, arithType, result);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result->X, size);
    DCACHE_InvalidateByRange((uint32_t)result->Y, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ECC_PointDoubleNonBlocking(CAAM_Type *base,
                                              caam_handle_t *handle,
                                              caam_desc_pkha_ecc_t descriptor,
                                              const caam_pkha_ecc_point_t *B,
                                              const uint8_t *N,
                                              const uint8_t *aCurveParam,
                                              const uint8_t *bCurveParam,
                                              size_t size,
                                              caam_pkha_f2m_t arithType,
                                              caam_pkha_ecc_point_t *result);

status_t CAAM_PKHA_ECC_PointDoubleNonBlocking(CAAM_Type *base,
                                              caam_handle_t *handle,
                                              caam_desc_pkha_ecc_t descriptor,
                                              const caam_pkha_ecc_point_t *B,
                                              const uint8_t *N,
                                              const uint8_t *aCurveParam,
                                              const uint8_t *bCurveParam,
                                              size_t size,
                                              caam_pkha_f2m_t arithType,
                                              caam_pkha_ecc_point_t *result)
{
    caam_pkha_mode_params_t params;
    status_t status;

    caam_pkha_default_parms(&params);
    params.func      = kCAAM_PKHA_ArithEccDouble;
    params.arithType = arithType;

    status = caam_pkha_ecc_algorithm_operation_command(base, handle, descriptor, NULL, B, NULL, 0, N, NULL, NULL,
                                                       aCurveParam, bCurveParam, size, result, &params);
    return status;
}

/*!
 * brief Doubles elliptic curve points - B + B.
 *
 * This function performs ECC point doubling over a prime field (Fp) or binary field (F2m) using
 * affine coordinates.
 *
 * param base CAAM peripheral base address
 * param B Point to double
 * param N Prime modulus of the field
 * param aCurveParam A parameter from curve equation
 * param bCurveParam B parameter from curve equation (constant)
 * param size Size in bytes of curve points and parameters
 * param arithType Type of arithmetic to perform (integer or F2m)
 * param[out] result Result point
 * return Operation status.
 */
status_t CAAM_PKHA_ECC_PointDouble(CAAM_Type *base,
                                   caam_handle_t *handle,
                                   const caam_pkha_ecc_point_t *B,
                                   const uint8_t *N,
                                   const uint8_t *aCurveParam,
                                   const uint8_t *bCurveParam,
                                   size_t size,
                                   caam_pkha_f2m_t arithType,
                                   caam_pkha_ecc_point_t *result)
{
    caam_desc_pkha_ecc_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ECC_PointDoubleNonBlocking(base, handle, descBuf, B, N, aCurveParam, bCurveParam, size,
                                                      arithType, result);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result->X, size);
    DCACHE_InvalidateByRange((uint32_t)result->Y, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

status_t CAAM_PKHA_ECC_PointMulNonBlocking(CAAM_Type *base,
                                           caam_handle_t *handle,
                                           caam_desc_pkha_ecc_t descriptor,
                                           const caam_pkha_ecc_point_t *A,
                                           const uint8_t *E,
                                           size_t sizeE,
                                           const uint8_t *N,
                                           const uint8_t *R2modN,
                                           const uint8_t *aCurveParam,
                                           const uint8_t *bCurveParam,
                                           size_t size,
                                           caam_pkha_timing_t equalTime,
                                           caam_pkha_f2m_t arithType,
                                           caam_pkha_ecc_point_t *result);

status_t CAAM_PKHA_ECC_PointMulNonBlocking(CAAM_Type *base,
                                           caam_handle_t *handle,
                                           caam_desc_pkha_ecc_t descriptor,
                                           const caam_pkha_ecc_point_t *A,
                                           const uint8_t *E,
                                           size_t sizeE,
                                           const uint8_t *N,
                                           const uint8_t *R2modN,
                                           const uint8_t *aCurveParam,
                                           const uint8_t *bCurveParam,
                                           size_t size,
                                           caam_pkha_timing_t equalTime,
                                           caam_pkha_f2m_t arithType,
                                           caam_pkha_ecc_point_t *result)
{
    caam_pkha_mode_params_t params;
    status_t status;

    caam_pkha_default_parms(&params);
    params.func      = kCAAM_PKHA_ArithEccMul;
    params.equalTime = equalTime;
    params.arithType = arithType;
    params.r2modn    = (R2modN != NULL) ? kCAAM_PKHA_InputR2 : kCAAM_PKHA_CalcR2;

    status = caam_pkha_ecc_algorithm_operation_command(base, handle, descriptor, A, NULL, E, sizeE, N, R2modN, NULL,
                                                       aCurveParam, bCurveParam, size, result, &params);
    return status;
}

/*!
 * brief Multiplies an elliptic curve point by a scalar - E x (A0, A1).
 *
 * This function performs ECC point multiplication to multiply an ECC point by
 * a scalar integer multiplier over a prime field (Fp) or a binary field (F2m).
 *
 * param base CAAM peripheral base address
 * param A Point as multiplicand
 * param E Scalar multiple
 * param sizeE The size of E, in bytes
 * param N Modulus, a prime number for the Fp field or Irreducible polynomial for F2m field.
 * param R2modN NULL (the function computes R2modN internally) or pointer to pre-computed R2modN (obtained from
 *        CAAM_PKHA_ModR2() function).
 * param aCurveParam A parameter from curve equation
 * param bCurveParam B parameter from curve equation (C parameter for operation over F2m).
 * param size Size in bytes of curve points and parameters
 * param equalTime Run the function time equalized or no timing equalization.
 * param arithType Type of arithmetic to perform (integer or F2m)
 * param[out] result Result point
 * return Operation status.
 */
status_t CAAM_PKHA_ECC_PointMul(CAAM_Type *base,
                                caam_handle_t *handle,
                                const caam_pkha_ecc_point_t *A,
                                const uint8_t *E,
                                size_t sizeE,
                                const uint8_t *N,
                                const uint8_t *R2modN,
                                const uint8_t *aCurveParam,
                                const uint8_t *bCurveParam,
                                size_t size,
                                caam_pkha_timing_t equalTime,
                                caam_pkha_f2m_t arithType,
                                caam_pkha_ecc_point_t *result)
{
    caam_desc_pkha_ecc_t descBuf;
    status_t status;

    do
    {
        status = CAAM_PKHA_ECC_PointMulNonBlocking(base, handle, descBuf, A, E, sizeE, N, R2modN, aCurveParam,
                                                   bCurveParam, size, equalTime, arithType, result);
    } while (status == kStatus_CAAM_Again);

    if (status != kStatus_Success)
    {
        return status;
    }

    status = CAAM_Wait(base, handle, descBuf, kCAAM_Blocking);
#if defined(CAAM_OUT_INVALIDATE) && (CAAM_OUT_INVALIDATE > 0u)
    /* NOTE: DCACHE must be set to write-trough mode to safely invalidate cache!! */
    /* Invalidate unaligned data can cause memory corruption in write-back mode   */
    DCACHE_InvalidateByRange((uint32_t)result->X, size);
    DCACHE_InvalidateByRange((uint32_t)result->Y, size);
#endif /* CAAM_OUT_INVALIDATE */
    return status;
}

/*!
 * brief Converts from integer to Montgomery format.
 *
 * This function computes R2 mod N and optionally converts A or B into Montgomery format of A or B.
 *
 * param base CAAM peripheral base address
 * param N modulus
 * param sizeN size of N in bytes
 * param[in,out] A The first input in non-Montgomery format. Output Montgomery format of the first input.
 * param[in,out] sizeA pointer to size variable. On input it holds size of input A in bytes. On output it holds size of
 *                Montgomery format of A in bytes.
 * param[in,out] B Second input in non-Montgomery format. Output Montgomery format of the second input.
 * param[in,out] sizeB pointer to size variable. On input it holds size of input B in bytes. On output it holds size of
 *                Montgomery format of B in bytes.
 * param[out] R2 Output Montgomery factor R2 mod N.
 * param[out] sizeR2 pointer to size variable. On output it holds size of Montgomery factor R2 mod N in bytes.
 * param equalTime Run the function time equalized or no timing equalization.
 * param arithType Type of arithmetic to perform (integer or F2m)
 * return Operation status.
 */
status_t CAAM_PKHA_NormalToMontgomery(CAAM_Type *base,
                                      caam_handle_t *handle,
                                      const uint8_t *N,
                                      size_t sizeN,
                                      uint8_t *A,
                                      size_t *sizeA,
                                      uint8_t *B,
                                      size_t *sizeB,
                                      uint8_t *R2,
                                      size_t *sizeR2,
                                      caam_pkha_timing_t equalTime,
                                      caam_pkha_f2m_t arithType)
{
    status_t status;

    /* need to convert our Integer inputs into Montgomery format */
    if ((N != NULL) && (sizeN != 0U) && (R2 != NULL) && (sizeR2 != NULL))
    {
        /* 1. R2 = MOD_R2(N) */
        status = CAAM_PKHA_ModR2(base, handle, N, sizeN, R2, sizeR2, arithType);
        if (status != kStatus_Success)
        {
            return status;
        }

        /* 2. A(Montgomery) = MOD_MUL_IM_OM(A, R2, N) */
        if ((A != NULL) && (sizeA != NULL))
        {
            status = CAAM_PKHA_ModMul(base, handle, A, *sizeA, R2, *sizeR2, N, sizeN, A, sizeA, arithType,
                                      kCAAM_PKHA_MontgomeryFormat, kCAAM_PKHA_MontgomeryFormat, equalTime);
            if (status != kStatus_Success)
            {
                return status;
            }
        }

        /* 2. B(Montgomery) = MOD_MUL_IM_OM(B, R2, N) */
        if ((B != NULL) && (sizeB != NULL))
        {
            status = CAAM_PKHA_ModMul(base, handle, B, *sizeB, R2, *sizeR2, N, sizeN, B, sizeB, arithType,
                                      kCAAM_PKHA_MontgomeryFormat, kCAAM_PKHA_MontgomeryFormat, equalTime);
            if (status != kStatus_Success)
            {
                return status;
            }
        }
    }
    else
    {
        status = kStatus_InvalidArgument;
    }

    return status;
}

/*!
 * brief Converts from Montgomery format to int.
 *
 * This function converts Montgomery format of A or B into int A or B.
 *
 * param base CAAM peripheral base address
 * param N modulus.
 * param sizeN size of N modulus in bytes.
 * param[in,out] A Input first number in Montgomery format. Output is non-Montgomery format.
 * param[in,out] sizeA pointer to size variable. On input it holds size of the input A in bytes. On output it holds
 * size of non-Montgomery A in bytes.
 * param[in,out] B Input first number in Montgomery format. Output is non-Montgomery format.
 * param[in,out] sizeB pointer to size variable. On input it holds size of the input B in bytes. On output it holds
 * size of non-Montgomery B in bytes.
 * param equalTime Run the function time equalized or no timing equalization.
 * param arithType Type of arithmetic to perform (integer or F2m)
 * return Operation status.
 */
status_t CAAM_PKHA_MontgomeryToNormal(CAAM_Type *base,
                                      caam_handle_t *handle,
                                      const uint8_t *N,
                                      size_t sizeN,
                                      uint8_t *A,
                                      size_t *sizeA,
                                      uint8_t *B,
                                      size_t *sizeB,
                                      caam_pkha_timing_t equalTime,
                                      caam_pkha_f2m_t arithType)
{
    uint8_t one     = 1;
    status_t status = kStatus_InvalidArgument;

    /* A = MOD_MUL_IM_OM(A(Montgomery), 1, N) */
    if ((A != NULL) && (sizeA != NULL))
    {
        status = CAAM_PKHA_ModMul(base, handle, A, *sizeA, &one, sizeof(one), N, sizeN, A, sizeA, arithType,
                                  kCAAM_PKHA_MontgomeryFormat, kCAAM_PKHA_MontgomeryFormat, equalTime);
        if (kStatus_Success != status)
        {
            return status;
        }
    }

    /* B = MOD_MUL_IM_OM(B(Montgomery), 1, N) */
    if ((B != NULL) && (sizeB != NULL))
    {
        status = CAAM_PKHA_ModMul(base, handle, B, *sizeB, &one, sizeof(one), N, sizeN, B, sizeB, arithType,
                                  kCAAM_PKHA_MontgomeryFormat, kCAAM_PKHA_MontgomeryFormat, equalTime);
        if (kStatus_Success != status)
        {
            return status;
        }
    }
    return status;
}