/* * Copyright (c) 2017-2022 Arm Limited. All rights reserved. * Copyright (c) 2020 Nuvoton Technology Corp. All rights reserved. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __FLASH_LAYOUT_H__ #define __FLASH_LAYOUT_H__ /* This header file is included from linker scatter file as well, where only a * limited C constructs are allowed. Therefore it is not possible to include * here the platform_retarget.h to access flash related defines. To resolve this * some of the values are redefined here with different names, these are marked * with comment. */ /* Sector size of the flash hardware; same as FLASH0_SECTOR_SIZE */ #define FLASH_AREA_IMAGE_SECTOR_SIZE (0x800) /* 2 KB */ /* Same as FLASH0_SIZE */ #define FLASH_TOTAL_SIZE (0x0080000) /* Flash layout info for BL2 bootloader */ /* Same as FLASH0_BASE_S */ #define FLASH_BASE_ADDRESS (0x00000000) /* Offset and size definitions of the flash partitions that are handled by the * bootloader. The image swapping is done between IMAGE_PRIMARY and * IMAGE_SECONDARY, SCRATCH is used as a temporary storage during image * swapping. */ #define FLASH_AREA_BL2_OFFSET (0x0) #define FLASH_AREA_BL2_SIZE (0x10000) /* 64 KB */ #if !defined(MCUBOOT_IMAGE_NUMBER) || (MCUBOOT_IMAGE_NUMBER == 1) /* Size of a Secure and of a Non-secure image */ #define FLASH_S_PARTITION_SIZE (0x40000) #define FLASH_NS_PARTITION_SIZE (0x20000) #if (FLASH_S_PARTITION_SIZE > FLASH_NS_PARTITION_SIZE) #define FLASH_MAX_PARTITION_SIZE FLASH_S_PARTITION_SIZE #else #define FLASH_MAX_PARTITION_SIZE FLASH_NS_PARTITION_SIZE #endif /* Secure + Non-secure image primary slot */ #define FLASH_AREA_0_ID (1) #define FLASH_AREA_0_OFFSET (0x20000) #define FLASH_AREA_0_SIZE (FLASH_S_PARTITION_SIZE + FLASH_NS_PARTITION_SIZE) /* Secure + Non-secure secondary slot */ #define FLASH_AREA_2_ID (FLASH_AREA_0_ID + 1) #define FLASH_AREA_2_OFFSET (0x80000) #define FLASH_AREA_2_SIZE (0x80000) /* Scratch area */ #define FLASH_AREA_SCRATCH_ID (FLASH_AREA_2_ID + 1) #define FLASH_AREA_SCRATCH_OFFSET (0x100800) #define FLASH_AREA_SCRATCH_SIZE (0x800) /* The maximum number of status entries supported by the bootloader. */ #define MCUBOOT_STATUS_MAX_ENTRIES ((FLASH_S_PARTITION_SIZE + \ FLASH_NS_PARTITION_SIZE) / \ FLASH_AREA_SCRATCH_SIZE) /* Maximum number of image sectors supported by the bootloader. */ #define MCUBOOT_MAX_IMG_SECTORS ((FLASH_S_PARTITION_SIZE + \ FLASH_NS_PARTITION_SIZE) / \ FLASH_AREA_IMAGE_SECTOR_SIZE) #elif (MCUBOOT_IMAGE_NUMBER == 2) /* Size of a Secure and of a Non-secure image */ #define FLASH_S_PARTITION_SIZE (0x40000) #define FLASH_NS_PARTITION_SIZE (0x20000) #if (FLASH_S_PARTITION_SIZE > FLASH_NS_PARTITION_SIZE) #define FLASH_MAX_PARTITION_SIZE FLASH_S_PARTITION_SIZE #else #define FLASH_MAX_PARTITION_SIZE FLASH_NS_PARTITION_SIZE #endif /* Secure image primary slot */ #define FLASH_AREA_0_ID (1) #define FLASH_AREA_0_OFFSET (0x20000) #define FLASH_AREA_0_SIZE (FLASH_S_PARTITION_SIZE) /* Non-secure image primary slot */ #define FLASH_AREA_1_ID (FLASH_AREA_0_ID + 1) #define FLASH_AREA_1_OFFSET (0x60000) #define FLASH_AREA_1_SIZE (FLASH_NS_PARTITION_SIZE) /* Secure image secondary slot */ #define FLASH_AREA_2_ID (FLASH_AREA_1_ID + 1) #define FLASH_AREA_2_OFFSET (FLASH_AREA_0_OFFSET+FLASH_AREA_0_SIZE) #define FLASH_AREA_2_SIZE (0x00000) /* Non-secure image secondary slot */ #define FLASH_AREA_3_ID (FLASH_AREA_2_ID + 1) #define FLASH_AREA_3_OFFSET (FLASH_AREA_1_OFFSET+FLASH_AREA_1_SIZE) #define FLASH_AREA_3_SIZE (0x00000) /* Scratch area */ #define FLASH_AREA_SCRATCH_ID (FLASH_AREA_3_ID + 1) #define FLASH_AREA_SCRATCH_OFFSET (0x100800) #define FLASH_AREA_SCRATCH_SIZE (0x800) /* The maximum number of status entries supported by the bootloader. */ #define MCUBOOT_STATUS_MAX_ENTRIES ((FLASH_S_PARTITION_SIZE + \ FLASH_NS_PARTITION_SIZE) / \ FLASH_AREA_SCRATCH_SIZE) /* Maximum number of image sectors supported by the bootloader. */ #define MCUBOOT_MAX_IMG_SECTORS ((FLASH_S_PARTITION_SIZE + \ FLASH_NS_PARTITION_SIZE) / \ FLASH_AREA_IMAGE_SECTOR_SIZE) #else /* MCUBOOT_IMAGE_NUMBER > 2 */ #error "Only MCUBOOT_IMAGE_NUMBER 1 and 2 are supported!" #endif /* MCUBOOT_IMAGE_NUMBER */ /* Protected Storage (PS) Service definitions */ #define FLASH_PS_AREA_OFFSET (0x10000) #define FLASH_PS_AREA_SIZE (0x5000) /* Internal Trusted Storage (ITS) Service definitions */ #define FLASH_ITS_AREA_OFFSET (FLASH_PS_AREA_OFFSET + FLASH_PS_AREA_SIZE) #define FLASH_ITS_AREA_SIZE (0x5000) /* OTP_definitions */ #define FLASH_OTP_NV_COUNTERS_AREA_OFFSET (FLASH_ITS_AREA_OFFSET + FLASH_ITS_AREA_SIZE) #define FLASH_OTP_NV_COUNTERS_AREA_SIZE (FLASH_AREA_IMAGE_SECTOR_SIZE * 2) #define FLASH_OTP_NV_COUNTERS_SECTOR_SIZE FLASH_AREA_IMAGE_SECTOR_SIZE /* Offset and size definition in flash area used by assemble.py */ #define SECURE_IMAGE_OFFSET (0x0) #define SECURE_IMAGE_MAX_SIZE FLASH_S_PARTITION_SIZE #define NON_SECURE_IMAGE_OFFSET (SECURE_IMAGE_OFFSET + SECURE_IMAGE_MAX_SIZE) #define NON_SECURE_IMAGE_MAX_SIZE FLASH_NS_PARTITION_SIZE /* Flash device name used by BL2 * Name is defined in flash driver file: Driver_Flash.c */ #define FLASH_DEV_NAME Driver_FLASH0 /* Smallest flash programmable unit in bytes */ #define TFM_HAL_FLASH_PROGRAM_UNIT (0x4) /* Protected Storage (PS) Service definitions * Note: Further documentation of these definitions can be found in the * TF-M PS Integration Guide. */ #define TFM_HAL_PS_FLASH_DRIVER Driver_FLASH0 /* In this target the CMSIS driver requires only the offset from the base * address instead of the full memory address. */ #define TFM_HAL_PS_FLASH_AREA_ADDR FLASH_PS_AREA_OFFSET /* Dedicated flash area for PS */ #define TFM_HAL_PS_FLASH_AREA_SIZE FLASH_PS_AREA_SIZE #define PS_SECTOR_SIZE FLASH_AREA_IMAGE_SECTOR_SIZE /* Number of PS_SECTOR_SIZE per block */ #define TFM_HAL_PS_SECTORS_PER_BLOCK (0x1) /* Specifies the smallest flash programmable unit in bytes */ #define TFM_HAL_PS_PROGRAM_UNIT (0x4) /* Internal Trusted Storage (ITS) Service definitions * Note: Further documentation of these definitions can be found in the * TF-M ITS Integration Guide. The ITS should be in the internal flash, but is * allocated in the external flash just for development platforms that don't * have internal flash available. */ #define TFM_HAL_ITS_FLASH_DRIVER Driver_FLASH0 /* In this target the CMSIS driver requires only the offset from the base * address instead of the full memory address. */ #define TFM_HAL_ITS_FLASH_AREA_ADDR FLASH_ITS_AREA_OFFSET /* Dedicated flash area for ITS */ #define TFM_HAL_ITS_FLASH_AREA_SIZE FLASH_ITS_AREA_SIZE #define ITS_SECTOR_SIZE FLASH_AREA_IMAGE_SECTOR_SIZE /* Number of ITS_SECTOR_SIZE per block */ #define TFM_HAL_ITS_SECTORS_PER_BLOCK (0x1) /* Specifies the smallest flash programmable unit in bytes */ #define TFM_HAL_ITS_PROGRAM_UNIT (0x4) /* OTP / NV counter definitions */ #define TFM_OTP_NV_COUNTERS_AREA_SIZE (FLASH_OTP_NV_COUNTERS_AREA_SIZE / 2) #define TFM_OTP_NV_COUNTERS_AREA_ADDR FLASH_OTP_NV_COUNTERS_AREA_OFFSET #define TFM_OTP_NV_COUNTERS_SECTOR_SIZE FLASH_OTP_NV_COUNTERS_SECTOR_SIZE #define TFM_OTP_NV_COUNTERS_BACKUP_AREA_ADDR (TFM_OTP_NV_COUNTERS_AREA_ADDR + \ TFM_OTP_NV_COUNTERS_AREA_SIZE) /* Use SRAM1 memory to store Code data */ #define S_ROM_ALIAS_BASE (0x00000000) #define NS_ROM_ALIAS_BASE (0x10000000) /* FIXME: Use SRAM2 memory to store RW data */ #define S_RAM_ALIAS_BASE (0x20000000) #define NS_RAM_ALIAS_BASE (0x30000000) #define TOTAL_ROM_SIZE FLASH_TOTAL_SIZE #define TOTAL_RAM_SIZE (0x00040000) /* 256 KB */ #endif /* __FLASH_LAYOUT_H__ */