/* * Copyright (c) 2017-2022 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __REGION_DEFS_H__ #define __REGION_DEFS_H__ #include "flash_layout.h" #define BL2_HEAP_SIZE 0x0001000 #define BL2_MSP_STACK_SIZE 0x0001800 #ifdef ENABLE_HEAP #define S_HEAP_SIZE (0x0000200) #endif #define S_MSP_STACK_SIZE 0x0000800 #define S_PSP_STACK_SIZE 0x0000800 #define NS_HEAP_SIZE 0x0001000 #define NS_STACK_SIZE 0x0001000 /* * This size of buffer is big enough to store an attestation * token produced by initial attestation service */ #define PSA_INITIAL_ATTEST_TOKEN_MAX_SIZE 0x250 #define _SRAM2_TOP (0x40000) /* 256Kbytes */ #define _SRAM1_SIZE_MAX (0x30000) /*!< SRAM1=192k*/ #define _SRAM2_SIZE_MAX (0xfc00) /*!< SRAM2=64k -0x400 */ /* Flash and internal SRAMs base addresses - Non secure aliased */ #define _FLASH_BASE_NS (0x08000000) /*!< FLASH(up to 512 KB) base address */ #define _SRAM1_BASE_NS (0x20000000) /*!< SRAM1(up to 192 KB) base address */ #define _SRAM2_BASE_NS (0x20030000) /*!< SRAM2(64 KB) base address */ /* Flash and internal SRAMs base addresses - Secure aliased */ #define _FLASH_BASE_S (0x0C000000) /*!< FLASH(up to 512 KB) base address */ #define _SRAM1_BASE_S (0x30000000) /*!< SRAM1(up to 192 KB) base address */ #define _SRAM2_BASE_S (0x30030000) /*!< SRAM2(64 KB) base address */ #define TOTAL_ROM_SIZE FLASH_TOTAL_SIZE #define TOTAL_RAM_SIZE (_SRAM1_SIZE_MAX+_SRAM2_SIZE_MAX ) /* 192 + 64 Kbytes - BOOT info */ /* boot info are placed and locked at top of SRAM2 */ #define S_TOTAL_RAM_SIZE (0x1fc00 ) /*! size require for Secure part */ #define NS_TOTAL_RAM_SIZE (TOTAL_RAM_SIZE - S_TOTAL_RAM_SIZE) #ifdef BL2 #ifndef LINK_TO_SECONDARY_PARTITION #define S_IMAGE_PRIMARY_PARTITION_OFFSET (FLASH_AREA_0_OFFSET) #define S_IMAGE_SECONDARY_PARTITION_OFFSET (FLASH_AREA_2_OFFSET) #else #define S_IMAGE_PRIMARY_PARTITION_OFFSET (FLASH_AREA_2_OFFSET) #define S_IMAGE_SECONDARY_PARTITION_OFFSET (FLASH_AREA_0_OFFSET) #endif /* !LINK_TO_SECONDARY_PARTITION */ #else #define S_IMAGE_PRIMARY_PARTITION_OFFSET (0x0) #endif /* BL2 */ /* * Boot partition structure if MCUBoot is used: * 0x0_0000 Bootloader header * 0x0_0400 Image area * 0x7_0000 Trailer */ /* IMAGE_CODE_SIZE is the space available for the software binary image. * It is less than the FLASH_PARTITION_SIZE because we reserve space * for the image header and trailer introduced by the bootloader. */ #ifdef BL2 #ifndef LINK_TO_SECONDARY_PARTITION #define S_IMAGE_PRIMARY_PARTITION_OFFSET (FLASH_AREA_0_OFFSET) #define S_IMAGE_SECONDARY_PARTITION_OFFSET (FLASH_AREA_2_OFFSET) #else #define S_IMAGE_PRIMARY_PARTITION_OFFSET (FLASH_AREA_2_OFFSET) #define S_IMAGE_SECONDARY_PARTITION_OFFSET (FLASH_AREA_0_OFFSET) #endif /* !LINK_TO_SECONDARY_PARTITION */ #else #define S_IMAGE_PRIMARY_PARTITION_OFFSET (0x0) #endif /* BL2 */ #ifndef LINK_TO_SECONDARY_PARTITION #define NS_IMAGE_PRIMARY_PARTITION_OFFSET (FLASH_AREA_0_OFFSET + FLASH_S_PARTITION_SIZE) #else #define NS_IMAGE_PRIMARY_PARTITION_OFFSET (FLASH_AREA_2_OFFSET + FLASH_S_PARTITION_SIZE) #endif /* !LINK_TO_SECONDARY_PARTITION */ #define IMAGE_S_CODE_SIZE \ (FLASH_S_PARTITION_SIZE - BL2_HEADER_SIZE - BL2_TRAILER_SIZE) #define IMAGE_NS_CODE_SIZE \ (FLASH_NS_PARTITION_SIZE - BL2_HEADER_SIZE - BL2_TRAILER_SIZE) /* Use SRAM1 memory to store Code data */ #define S_ROM_ALIAS_BASE (_FLASH_BASE_S) #define NS_ROM_ALIAS_BASE (_FLASH_BASE_NS) #define S_RAM_ALIAS_BASE (_SRAM1_BASE_S) #define NS_RAM_ALIAS_BASE (_SRAM1_BASE_NS) /* Alias definitions for secure and non-secure areas*/ #define S_ROM_ALIAS(x) (S_ROM_ALIAS_BASE + (x)) #define NS_ROM_ALIAS(x) (NS_ROM_ALIAS_BASE + (x)) #define S_RAM_ALIAS(x) (S_RAM_ALIAS_BASE + (x)) #define NS_RAM_ALIAS(x) (NS_RAM_ALIAS_BASE + (x)) #define S_IMAGE_PRIMARY_AREA_OFFSET (S_IMAGE_PRIMARY_PARTITION_OFFSET + BL2_HEADER_SIZE) #define S_CODE_START (S_ROM_ALIAS(S_IMAGE_PRIMARY_AREA_OFFSET)) #define S_CODE_SIZE (IMAGE_S_CODE_SIZE) #define S_CODE_LIMIT ((S_CODE_START + S_CODE_SIZE) -1) #define S_DATA_START (S_RAM_ALIAS(NS_TOTAL_RAM_SIZE)) #define S_DATA_SIZE (S_TOTAL_RAM_SIZE) #define S_DATA_LIMIT (S_DATA_START + S_DATA_SIZE - 1) /* Size of vector table: 124 interrupt handlers + 4 bytes MPS initial value */ #define S_CODE_VECTOR_TABLE_SIZE (0x1F4) /* Non-secure regions */ /* Secure regions , the end of secure regions must be aligned on page size for dual bank 0x800*/ /* Offset and size definition in flash area, used by assemble.py * 0x11400+0x33c00= 13000+34000 = 45000*/ #define NS_IMAGE_PRIMARY_AREA_OFFSET (NS_IMAGE_PRIMARY_PARTITION_OFFSET + BL2_HEADER_SIZE) #define NS_CODE_START (NS_ROM_ALIAS(NS_IMAGE_PRIMARY_AREA_OFFSET)) #define NS_CODE_SIZE (IMAGE_NS_CODE_SIZE) #define NS_CODE_LIMIT (NS_CODE_START + NS_CODE_SIZE - 1) #define NS_DATA_START (NS_RAM_ALIAS(0)) #define NS_NO_INIT_DATA_SIZE (0x100) #define NS_DATA_SIZE (NS_TOTAL_RAM_SIZE) #define NS_DATA_LIMIT (NS_DATA_START + NS_DATA_SIZE - 1) /* NS partition information is used for GTZC and SAU configuration */ #define NS_PARTITION_START (NS_CODE_START) #define NS_PARTITION_SIZE (NS_CODE_SIZE) /* Secondary partition for new images/ in case of firmware upgrade */ #define SECONDARY_PARTITION_START (NS_ROM_ALIAS(S_IMAGE_SECONDARY_PARTITION_OFFSET)) #define SECONDARY_PARTITION_SIZE (FLASH_AREA_2_SIZE) #ifdef BL2 /* Personalized region */ #define PERSO_START (S_ROM_ALIAS(FLASH_AREA_PERSO_OFFSET)) #define PERSO_SIZE (FLASH_AREA_PERSO_SIZE) #define PERSO_LIMIT (PERSO_START + PERSO_SIZE - 1) /* Bootloader region protected by hdp */ #define BL2_CODE_START (S_ROM_ALIAS(FLASH_AREA_BL2_OFFSET)) #define BL2_CODE_SIZE (FLASH_AREA_BL2_SIZE) #define BL2_CODE_LIMIT (BL2_CODE_START + BL2_CODE_SIZE - 1) /* Bootloader region not protected by hdp */ #define BL2_NOHDP_CODE_START (S_ROM_ALIAS(FLASH_AREA_BL2_NOHDP_OFFSET)) #define BL2_NOHDP_CODE_SIZE (FLASH_AREA_BL2_NOHDP_SIZE) #define BL2_NOHDP_CODE_LIMIT (BL2_NOHDP_CODE_START + BL2_NOHDP_CODE_SIZE - 1) /* keep 256 bytes unsed to place while(1) for non secure to enable */ /* regression from local tool with non secure attachement * This avoid blocking board in case of hardening error */ #define BL2_DATA_START (S_RAM_ALIAS(_SRAM1_SIZE_MAX)) #define BL2_DATA_SIZE (BOOT_TFM_SHARED_DATA_BASE - BL2_DATA_START) #define BL2_DATA_LIMIT (BL2_DATA_START + BL2_DATA_SIZE - 1) #endif /* BL2 */ #endif /* __REGION_DEFS_H__ */