/* @(#)s_expm1.c 5.1 93/09/24 */
/*
 * ====================================================
 * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
 *
 * Developed at SunPro, a Sun Microsystems, Inc. business.
 * Permission to use, copy, modify, and distribute this
 * software is freely granted, provided that this notice 
 * is preserved.
 * ====================================================
 */

/*
FUNCTION
	<<expm1>>, <<expm1f>>---exponential minus 1
INDEX
	expm1
INDEX
	expm1f

SYNOPSIS
	#include <math.h>
	double expm1(double <[x]>);
	float expm1f(float <[x]>);

DESCRIPTION
	<<expm1>> and <<expm1f>> calculate the exponential of <[x]>
	and subtract 1, that is,
	@ifnottex
	e raised to the power <[x]> minus 1 (where e
	@end ifnottex
	@tex
	$e^x - 1$ (where $e$
	@end tex
	is the base of the natural system of logarithms, approximately
	2.71828).  The result is accurate even for small values of
	<[x]>, where using <<exp(<[x]>)-1>> would lose many
	significant digits.

RETURNS
	e raised to the power <[x]>, minus 1.

PORTABILITY
	Neither <<expm1>> nor <<expm1f>> is required by ANSI C or by
	the System V Interface Definition (Issue 2).
*/

/* expm1(x)
 * Returns exp(x)-1, the exponential of x minus 1.
 *
 * Method
 *   1. Argument reduction:
 *	Given x, find r and integer k such that
 *
 *               x = k*ln2 + r,  |r| <= 0.5*ln2 ~ 0.34658  
 *
 *      Here a correction term c will be computed to compensate 
 *	the error in r when rounded to a floating-point number.
 *
 *   2. Approximating expm1(r) by a special rational function on
 *	the interval [0,0.34658]:
 *	Since
 *	    r*(exp(r)+1)/(exp(r)-1) = 2+ r^2/6 - r^4/360 + ...
 *	we define R1(r*r) by
 *	    r*(exp(r)+1)/(exp(r)-1) = 2+ r^2/6 * R1(r*r)
 *	That is,
 *	    R1(r**2) = 6/r *((exp(r)+1)/(exp(r)-1) - 2/r)
 *		     = 6/r * ( 1 + 2.0*(1/(exp(r)-1) - 1/r))
 *		     = 1 - r^2/60 + r^4/2520 - r^6/100800 + ...
 *      We use a special Remez algorithm on [0,0.347] to generate 
 * 	a polynomial of degree 5 in r*r to approximate R1. The 
 *	maximum error of this polynomial approximation is bounded 
 *	by 2**-61. In other words,
 *	    R1(z) ~ 1.0 + Q1*z + Q2*z**2 + Q3*z**3 + Q4*z**4 + Q5*z**5
 *	where 	Q1  =  -1.6666666666666567384E-2,
 * 		Q2  =   3.9682539681370365873E-4,
 * 		Q3  =  -9.9206344733435987357E-6,
 * 		Q4  =   2.5051361420808517002E-7,
 * 		Q5  =  -6.2843505682382617102E-9;
 *  	(where z=r*r, and the values of Q1 to Q5 are listed below)
 *	with error bounded by
 *	    |                  5           |     -61
 *	    | 1.0+Q1*z+...+Q5*z   -  R1(z) | <= 2 
 *	    |                              |
 *	
 *	expm1(r) = exp(r)-1 is then computed by the following 
 * 	specific way which minimize the accumulation rounding error: 
 *			       2     3
 *			      r     r    [ 3 - (R1 + R1*r/2)  ]
 *	      expm1(r) = r + --- + --- * [--------------------]
 *		              2     2    [ 6 - r*(3 - R1*r/2) ]
 *	
 *	To compensate the error in the argument reduction, we use
 *		expm1(r+c) = expm1(r) + c + expm1(r)*c 
 *			   ~ expm1(r) + c + r*c 
 *	Thus c+r*c will be added in as the correction terms for
 *	expm1(r+c). Now rearrange the term to avoid optimization 
 * 	screw up:
 *		        (      2                                    2 )
 *		        ({  ( r    [ R1 -  (3 - R1*r/2) ]  )  }    r  )
 *	 expm1(r+c)~r - ({r*(--- * [--------------------]-c)-c} - --- )
 *	                ({  ( 2    [ 6 - r*(3 - R1*r/2) ]  )  }    2  )
 *                      (                                             )
 *    	
 *		   = r - E
 *   3. Scale back to obtain expm1(x):
 *	From step 1, we have
 *	   expm1(x) = either 2^k*[expm1(r)+1] - 1
 *		    = or     2^k*[expm1(r) + (1-2^-k)]
 *   4. Implementation notes:
 *	(A). To save one multiplication, we scale the coefficient Qi
 *	     to Qi*2^i, and replace z by (x^2)/2.
 *	(B). To achieve maximum accuracy, we compute expm1(x) by
 *	  (i)   if x < -56*ln2, return -1.0, (raise inexact if x!=inf)
 *	  (ii)  if k=0, return r-E
 *	  (iii) if k=-1, return 0.5*(r-E)-0.5
 *        (iv)	if k=1 if r < -0.25, return 2*((r+0.5)- E)
 *	       	       else	     return  1.0+2.0*(r-E);
 *	  (v)   if (k<-2||k>56) return 2^k(1-(E-r)) - 1 (or exp(x)-1)
 *	  (vi)  if k <= 20, return 2^k((1-2^-k)-(E-r)), else
 *	  (vii) return 2^k(1-((E+2^-k)-r)) 
 *
 * Special cases:
 *	expm1(INF) is INF, expm1(NaN) is NaN;
 *	expm1(-INF) is -1, and
 *	for finite argument, only expm1(0)=0 is exact.
 *
 * Accuracy:
 *	according to an error analysis, the error is always less than
 *	1 ulp (unit in the last place).
 *
 * Misc. info.
 *	For IEEE double 
 *	    if x >  7.09782712893383973096e+02 then expm1(x) overflow
 *
 * Constants:
 * The hexadecimal values are the intended ones for the following 
 * constants. The decimal values may be used, provided that the 
 * compiler will convert from decimal to binary accurately enough
 * to produce the hexadecimal values shown.
 */

#include "fdlibm.h"
#include "math_config.h"

#ifdef _NEED_FLOAT64

static const __float64
    one		= _F_64(1.0),
    huge	= _F_64(1.0e+300),
    tiny	= _F_64(1.0e-300),
    o_threshold	= _F_64(7.09782712893383973096e+02),/* 0x40862E42, 0xFEFA39EF */
    ln2_hi	= _F_64(6.93147180369123816490e-01),/* 0x3fe62e42, 0xfee00000 */
    ln2_lo	= _F_64(1.90821492927058770002e-10),/* 0x3dea39ef, 0x35793c76 */
    invln2	= _F_64(1.44269504088896338700e+00),/* 0x3ff71547, 0x652b82fe */
    /* scaled coefficients related to expm1 */
    Q1  =  _F_64(-3.33333333333331316428e-02), /* BFA11111 111110F4 */
    Q2  =   _F_64(1.58730158725481460165e-03), /* 3F5A01A0 19FE5585 */
    Q3  =  _F_64(-7.93650757867487942473e-05), /* BF14CE19 9EAADBB7 */
    Q4  =   _F_64(4.00821782732936239552e-06), /* 3ED0CFCA 86E65239 */
    Q5  =  _F_64(-2.01099218183624371326e-07); /* BE8AFDB7 6E09C32D */

__float64
_NAME_64(expm1)(__float64 x)
{
	__float64 y,hi,lo,c,t,e,hxs,hfx,r1;
	__int32_t k,xsb;
	__uint32_t hx;

	GET_HIGH_WORD(hx,x);
	xsb = hx&0x80000000;		/* sign bit of x */
	if(xsb==0) y=x; else y= -x;	/* y = |x| */
	hx &= 0x7fffffff;		/* high word of |x| */

    /* filter out huge and non-finite argument */
	if(hx >= 0x4043687A) {			/* if |x|>=56*ln2 */
	    if(hx >= 0x40862E42) {		/* if |x|>=709.78... */
                if(hx>=0x7ff00000) {
		    __uint32_t low;
		    GET_LOW_WORD(low,x);
		    if(((hx&0xfffff)|low)!=0) 
		         return x+x; 	 /* NaN */
		    else return (xsb==0)? x:_F_64(-1.0);/* exp(+-inf)={inf,-1} */
	        }
	        if(x > o_threshold) return __math_oflow (0); /* overflow */
	    }
	    if(xsb!=0) { /* x < -56*ln2, return -1.0 with inexact */
		if(x+tiny<_F_64(0.0))		/* raise inexact */
		return tiny-one;	/* return -1 */
	    }
	}

    /* argument reduction */
	if(hx > 0x3fd62e42) {		/* if  |x| > 0.5 ln2 */ 
	    if(hx < 0x3FF0A2B2) {	/* and |x| < 1.5 ln2 */
		if(xsb==0)
		    {hi = x - ln2_hi; lo =  ln2_lo;  k =  1;}
		else
		    {hi = x + ln2_hi; lo = -ln2_lo;  k = -1;}
	    } else {
		k  = invln2*x+((xsb==0)?_F_64(0.5):_F_64(-0.5));
		t  = k;
		hi = x - t*ln2_hi;	/* t*ln2_hi is exact here */
		lo = t*ln2_lo;
	    }
	    x  = hi - lo;
	    c  = (hi-x)-lo;
	} 
	else if(hx < 0x3c900000) {  	/* when |x|<2**-54, return x */
	    t = huge+x;	/* return x with inexact flags when x!=0 */
	    return x - (t-(huge+x));	
	}
	else k = 0;

    /* x is now in primary range */
	hfx = _F_64(0.5)*x;
	hxs = x*hfx;
	r1 = one+hxs*(Q1+hxs*(Q2+hxs*(Q3+hxs*(Q4+hxs*Q5))));
	t  = _F_64(3.0)-r1*hfx;
	e  = hxs*((r1-t)/(_F_64(6.0) - x*t));
	if(k==0) return x - (x*e-hxs);		/* c is 0 */
	else {
	    e  = (x*(e-c)-c);
	    e -= hxs;
	    if(k== -1) return _F_64(0.5)*(x-e)_F_64(-0.5);
          if(k==1) {
	       	if(x < _F_64(-0.25)) return _F_64(-2.0)*(e-(x+_F_64(0.5)));
	       	else 	      return  one+_F_64(2.0)*(x-e);
          }
	    if (k <= -2 || k>56) {   /* suffice to return exp(x)-1 */
	        __uint32_t high;
	        y = one-(e-x);
		GET_HIGH_WORD(high,y);
		SET_HIGH_WORD(y,high+(k<<20));	/* add k to y's exponent */
	        return y-one;
	    }
	    t = one;
	    if(k<20) {
	        __uint32_t high;
	        SET_HIGH_WORD(t,0x3ff00000 - (0x200000>>k));  /* t=1-2^-k */
	       	y = t-(e-x);
		GET_HIGH_WORD(high,y);
		SET_HIGH_WORD(y,high+(k<<20));	/* add k to y's exponent */
	   } else {
	        __uint32_t high;
		SET_HIGH_WORD(t,((0x3ff-k)<<20));	/* 2^-k */
	       	y = x-(e+t);
	       	y += one;
		GET_HIGH_WORD(high,y);
		SET_HIGH_WORD(y,high+(k<<20));	/* add k to y's exponent */
	    }
	}
	return y;
}

_MATH_ALIAS_d_d(expm1)

#endif /* _NEED_FLOAT64 */