/* * Copyright (c) 2016, The OpenThread Authors. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holder nor the * names of its contributors may be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /** * @file * @brief * This file defines the platform diag interface. * */ #ifndef OPENTHREAD_PLATFORM_DIAG_H_ #define OPENTHREAD_PLATFORM_DIAG_H_ #include #include #include #include #ifdef __cplusplus extern "C" { #endif /** * @addtogroup plat-factory-diagnostics * * @brief * This module includes the platform abstraction for diagnostics features. * * @{ * */ /** * Defines the gpio modes. * */ typedef enum { OT_GPIO_MODE_INPUT = 0, ///< Input mode without pull resistor. OT_GPIO_MODE_OUTPUT = 1, ///< Output mode. } otGpioMode; /** * Processes a factory diagnostics command line. * * The output of this function (the content written to @p aOutput) MUST terminate with `\0` and the `\0` is within the * output buffer. * * @param[in] aInstance The OpenThread instance for current request. * @param[in] aArgsLength The number of arguments in @p aArgs. * @param[in] aArgs The arguments of diagnostics command line. * @param[out] aOutput The diagnostics execution result. * @param[in] aOutputMaxLen The output buffer size. * * @retval OT_ERROR_INVALID_ARGS The command is supported but invalid arguments provided. * @retval OT_ERROR_NONE The command is successfully process. * @retval OT_ERROR_INVALID_COMMAND The command is not valid or not supported. * */ otError otPlatDiagProcess(otInstance *aInstance, uint8_t aArgsLength, char *aArgs[], char *aOutput, size_t aOutputMaxLen); /** * Enables/disables the factory diagnostics mode. * * @param[in] aMode TRUE to enable diagnostics mode, FALSE otherwise. * */ void otPlatDiagModeSet(bool aMode); /** * Indicates whether or not factory diagnostics mode is enabled. * * @returns TRUE if factory diagnostics mode is enabled, FALSE otherwise. * */ bool otPlatDiagModeGet(void); /** * Sets the channel to use for factory diagnostics. * * @param[in] aChannel The channel value. * */ void otPlatDiagChannelSet(uint8_t aChannel); /** * Sets the transmit power to use for factory diagnostics. * * @param[in] aTxPower The transmit power value. * */ void otPlatDiagTxPowerSet(int8_t aTxPower); /** * Processes the received radio frame. * * @param[in] aInstance The OpenThread instance for current request. * @param[in] aFrame The received radio frame. * @param[in] aError The received radio frame status. * */ void otPlatDiagRadioReceived(otInstance *aInstance, otRadioFrame *aFrame, otError aError); /** * Processes the alarm event. * * @param[in] aInstance The OpenThread instance for current request. * */ void otPlatDiagAlarmCallback(otInstance *aInstance); /** * Sets the gpio value. * * @param[in] aGpio The gpio number. * @param[in] aValue true to set the gpio to high level, or false otherwise. * * @retval OT_ERROR_NONE Successfully set the gpio. * @retval OT_ERROR_FAILED A platform error occurred while setting the gpio. * @retval OT_ERROR_INVALID_ARGS @p aGpio is not supported. * @retval OT_ERROR_INVALID_STATE Diagnostic mode was not enabled or @p aGpio is not configured as output. * @retval OT_ERROR_NOT_IMPLEMENTED This function is not implemented or configured on the platform. * */ otError otPlatDiagGpioSet(uint32_t aGpio, bool aValue); /** * Gets the gpio value. * * @param[in] aGpio The gpio number. * @param[out] aValue A pointer where to put gpio value. * * @retval OT_ERROR_NONE Successfully got the gpio value. * @retval OT_ERROR_FAILED A platform error occurred while getting the gpio value. * @retval OT_ERROR_INVALID_ARGS @p aGpio is not supported or @p aValue is NULL. * @retval OT_ERROR_INVALID_STATE Diagnostic mode was not enabled or @p aGpio is not configured as input. * @retval OT_ERROR_NOT_IMPLEMENTED This function is not implemented or configured on the platform. * */ otError otPlatDiagGpioGet(uint32_t aGpio, bool *aValue); /** * Sets the gpio mode. * * @param[in] aGpio The gpio number. * @param[out] aMode The gpio mode. * * @retval OT_ERROR_NONE Successfully set the gpio mode. * @retval OT_ERROR_FAILED A platform error occurred while setting the gpio mode. * @retval OT_ERROR_INVALID_ARGS @p aGpio or @p aMode is not supported. * @retval OT_ERROR_INVALID_STATE Diagnostic mode was not enabled. * @retval OT_ERROR_NOT_IMPLEMENTED This function is not implemented or configured on the platform. * */ otError otPlatDiagGpioSetMode(uint32_t aGpio, otGpioMode aMode); /** * Gets the gpio mode. * * @param[in] aGpio The gpio number. * @param[out] aMode A pointer where to put gpio mode. * * @retval OT_ERROR_NONE Successfully got the gpio mode. * @retval OT_ERROR_FAILED Mode returned by the platform is not implemented in OpenThread or a platform error * occurred while getting the gpio mode. * @retval OT_ERROR_INVALID_ARGS @p aGpio is not supported or @p aMode is NULL. * @retval OT_ERROR_INVALID_STATE Diagnostic mode was not enabled. * @retval OT_ERROR_NOT_IMPLEMENTED This function is not implemented or configured on the platform. * */ otError otPlatDiagGpioGetMode(uint32_t aGpio, otGpioMode *aMode); /** * Set the radio raw power setting for diagnostics module. * * @param[in] aInstance The OpenThread instance structure. * @param[in] aRawPowerSetting A pointer to the raw power setting byte array. * @param[in] aRawPowerSettingLength The length of the @p aRawPowerSetting. * * @retval OT_ERROR_NONE Successfully set the raw power setting. * @retval OT_ERROR_INVALID_ARGS The @p aRawPowerSetting is NULL or the @p aRawPowerSettingLength is too long. * @retval OT_ERROR_NOT_IMPLEMENTED This method is not implemented. * */ otError otPlatDiagRadioSetRawPowerSetting(otInstance *aInstance, const uint8_t *aRawPowerSetting, uint16_t aRawPowerSettingLength); /** * Get the radio raw power setting for diagnostics module. * * @param[in] aInstance The OpenThread instance structure. * @param[out] aRawPowerSetting A pointer to the raw power setting byte array. * @param[in,out] aRawPowerSettingLength On input, a pointer to the size of @p aRawPowerSetting. * On output, a pointer to the length of the raw power setting data. * * @retval OT_ERROR_NONE Successfully set the raw power setting. * @retval OT_ERROR_INVALID_ARGS The @p aRawPowerSetting or @p aRawPowerSettingLength is NULL or * @aRawPowerSettingLength is too short. * @retval OT_ERROR_NOT_FOUND The raw power setting is not set. * @retval OT_ERROR_NOT_IMPLEMENTED This method is not implemented. * */ otError otPlatDiagRadioGetRawPowerSetting(otInstance *aInstance, uint8_t *aRawPowerSetting, uint16_t *aRawPowerSettingLength); /** * Enable/disable the platform layer to use the raw power setting set by `otPlatDiagRadioSetRawPowerSetting()`. * * @param[in] aInstance The OpenThread instance structure. * @param[in] aEnable TRUE to enable or FALSE to disable the raw power setting. * * @retval OT_ERROR_NONE Successfully enabled/disabled the raw power setting. * @retval OT_ERROR_NOT_IMPLEMENTED This method is not implemented. * */ otError otPlatDiagRadioRawPowerSettingEnable(otInstance *aInstance, bool aEnable); /** * Start/stop the platform layer to transmit continuous carrier wave. * * @param[in] aInstance The OpenThread instance structure. * @param[in] aEnable TRUE to enable or FALSE to disable the platform layer to transmit continuous carrier wave. * * @retval OT_ERROR_NONE Successfully enabled/disabled . * @retval OT_ERROR_INVALID_STATE The radio was not in the Receive state. * @retval OT_ERROR_NOT_IMPLEMENTED This method is not implemented. * */ otError otPlatDiagRadioTransmitCarrier(otInstance *aInstance, bool aEnable); /** * Start/stop the platform layer to transmit stream of characters. * * @param[in] aInstance The OpenThread instance structure. * @param[in] aEnable TRUE to enable or FALSE to disable the platform layer to transmit stream. * * @retval OT_ERROR_NONE Successfully enabled/disabled. * @retval OT_ERROR_INVALID_STATE The radio was not in the Receive state. * @retval OT_ERROR_NOT_IMPLEMENTED This function is not implemented. * */ otError otPlatDiagRadioTransmitStream(otInstance *aInstance, bool aEnable); /** * Get the power settings for the given channel. * * @param[in] aInstance The OpenThread instance structure. * @param[in] aChannel The radio channel. * @param[out] aTargetPower The target power in 0.01 dBm. * @param[out] aActualPower The actual power in 0.01 dBm. * @param[out] aRawPowerSetting A pointer to the raw power setting byte array. * @param[in,out] aRawPowerSettingLength On input, a pointer to the size of @p aRawPowerSetting. * On output, a pointer to the length of the raw power setting data. * * @retval OT_ERROR_NONE Successfully got the target power. * @retval OT_ERROR_INVALID_ARGS The @p aChannel is invalid, @aTargetPower, @p aActualPower, @p aRawPowerSetting or * @p aRawPowerSettingLength is NULL or @aRawPowerSettingLength is too short. * @retval OT_ERROR_NOT_FOUND The power settings for the @p aChannel was not found. * @retval OT_ERROR_NOT_IMPLEMENTED This method is not implemented. * */ otError otPlatDiagRadioGetPowerSettings(otInstance *aInstance, uint8_t aChannel, int16_t *aTargetPower, int16_t *aActualPower, uint8_t *aRawPowerSetting, uint16_t *aRawPowerSettingLength); /** * @} * */ #ifdef __cplusplus } // end of extern "C" #endif #endif // OPENTHREAD_PLATFORM_DIAG_H_