#!/bin/bash # # Copyright (c) 2020, The OpenThread Authors. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. Neither the name of the copyright holder nor the # names of its contributors may be used to endorse or promote products # derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # set -euxo pipefail : "${CFLAGS:=}" : "${CXXFLAGS:=}" OT_BUILDDIR="$(pwd)/build" readonly OT_BUILDDIR reset_source() { rm -rf "$OT_BUILDDIR" } build_all_features() { local cppflags=( "-DOPENTHREAD_CONFIG_ANNOUNCE_SENDER_ENABLE=1" "-DOPENTHREAD_CONFIG_ANYCAST_LOCATOR=1" "-DOPENTHREAD_CONFIG_BORDER_AGENT_ENABLE=1" "-DOPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE=1" "-DOPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE=1" "-DOPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE=1" "-DOPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE=1" "-DOPENTHREAD_CONFIG_COAP_API_ENABLE=1" "-DOPENTHREAD_CONFIG_COAP_SECURE_API_ENABLE=1" "-DOPENTHREAD_CONFIG_COMMISSIONER_ENABLE=1" "-DOPENTHREAD_CONFIG_DATASET_UPDATER_ENABLE=1" "-DOPENTHREAD_CONFIG_DHCP6_CLIENT_ENABLE=1" "-DOPENTHREAD_CONFIG_DHCP6_SERVER_ENABLE=1" "-DOPENTHREAD_CONFIG_DIAG_ENABLE=1" "-DOPENTHREAD_CONFIG_DNS_CLIENT_ENABLE=1" "-DOPENTHREAD_CONFIG_DNS_DSO_ENABLE=1" "-DOPENTHREAD_CONFIG_ECDSA_ENABLE=1" "-DOPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE=1" "-DOPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE=1" "-DOPENTHREAD_CONFIG_IP6_FRAGMENTATION_ENABLE=1" "-DOPENTHREAD_CONFIG_IP6_SLAAC_ENABLE=1" "-DOPENTHREAD_CONFIG_JAM_DETECTION_ENABLE=1" "-DOPENTHREAD_CONFIG_JOINER_ENABLE=1" "-DOPENTHREAD_CONFIG_LINK_RAW_ENABLE=1" "-DOPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_BEACON_RSP_WHEN_JOINABLE_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_FILTER_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_RETRY_SUCCESS_HISTOGRAM_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_SOFTWARE_ENERGY_SCAN_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE=1" "-DOPENTHREAD_CONFIG_MLE_ATTACH_BACKOFF_ENABLE=1" "-DOPENTHREAD_CONFIG_MLE_STEERING_DATA_SET_OOB_ENABLE=1" "-DOPENTHREAD_CONFIG_MPL_DYNAMIC_INTERVAL_ENABLE" "-DOPENTHREAD_CONFIG_NCP_HDLC_ENABLE=1" "-DOPENTHREAD_CONFIG_NCP_SPI_ENABLE=1" "-DOPENTHREAD_CONFIG_PING_SENDER_ENABLE=1" "-DOPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE=1" "-DOPENTHREAD_CONFIG_PLATFORM_RADIO_COEX_ENABLE=1" "-DOPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE=1" "-DOPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE=1" "-DOPENTHREAD_CONFIG_SNTP_CLIENT_ENABLE=1" "-DOPENTHREAD_CONFIG_SRP_CLIENT_ENABLE=1" "-DOPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE=1" "-DOPENTHREAD_CONFIG_TMF_NETDIAG_CLIENT_ENABLE=1" "-DOPENTHREAD_CONFIG_UDP_FORWARD_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_BEACON_PAYLOAD_PARSING_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_OUTGOING_BEACON_PAYLOAD_ENABLE=1" ) # Build Thread 1.1 with full features reset_source CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ "$(dirname "$0")"/cmake-build simulation \ -DOT_THREAD_VERSION=1.1 # Build Thread 1.1 with full features and no log reset_source CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ "$(dirname "$0")"/cmake-build simulation \ -DOT_THREAD_VERSION=1.1 \ -DOT_LOG_OUTPUT=NONE # Build Thread 1.1 with full features and full logs reset_source CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ "$(dirname "$0")"/cmake-build simulation \ -DOT_THREAD_VERSION=1.1 \ -DOT_FULL_LOGS=ON # Build Thread 1.1 cli-radio reset_source "$(dirname "$0")"/cmake-build simulation \ -DOT_THREAD_VERSION=1.1 \ -DOT_DIAGNOSTIC=ON \ -DOT_APP_CLI=ON \ -DOT_APP_NCP=OFF \ -DOT_APP_RCP=OFF \ -DOT_FTD=OFF \ -DOT_MTD=OFF # Build Thread 1.1 with ASSERT disabled reset_source CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ "$(dirname "$0")"/cmake-build simulation \ -DOT_THREAD_VERSION=1.1 \ -DOT_SIMULATION_VIRTUAL_TIME=ON \ -DOT_ASSERT=OFF # Build Thread 1.1 OTNS reset_source CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ "$(dirname "$0")"/cmake-build simulation \ -DOT_THREAD_VERSION=1.1 \ -DOT_SIMULATION_VIRTUAL_TIME=ON \ -DOT_OTNS=ON # Thread 1.3 options local options=( "-DOT_BACKBONE_ROUTER=ON" "-DOT_BORDER_ROUTING=ON" "-DOT_NAT64_BORDER_ROUTING=ON" "-DOT_NAT64_TRANSLATOR=ON" "-DOT_CSL_RECEIVER=ON" "-DOT_MLR=ON" "-DOT_OTNS=ON" "-DOT_SIMULATION_VIRTUAL_TIME=ON" "-DOT_THREAD_VERSION=1.3" ) # Build Thread 1.3 with full features reset_source CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ "$(dirname "$0")"/cmake-build simulation "${options[@]}" -DOT_DUA=ON # Build Thread 1.3 with external heap and msg pool using heap reset_source CFLAGS="${cppflags[*]} ${CFLAGS} -DOPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE=1" \ CXXFLAGS="${cppflags[*]} ${CXXFLAGS} -DOPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE=1" \ "$(dirname "$0")"/cmake-build simulation "${options[@]}" -DOT_DUA=ON # Build Thread 1.3 with full features and no log reset_source CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ "$(dirname "$0")"/cmake-build simulation "${options[@]}" -DOT_DUA=ON -DOT_LOG_OUTPUT=NONE # Build Thread 1.3 with full features and full logs reset_source CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ "$(dirname "$0")"/cmake-build simulation "${options[@]}" -DOT_DUA=ON -DOT_FULL_LOGS=ON # Build Thread 1.3 Backbone Router without DUA ND Proxying reset_source "$(dirname "$0")"/cmake-build simulation "${options[@]}" -DOT_BACKBONE_ROUTER_DUA_NDPROXYING=OFF # Build Thread 1.3 Backbone Router without Multicast Routing reset_source "$(dirname "$0")"/cmake-build simulation "${options[@]}" -DOT_BACKBONE_ROUTER_MULTICAST_ROUTING=OFF # Build with Vendor Extension reset_source "$(dirname "$0")"/cmake-build simulation \ -DOT_THREAD_VERSION=1.1 \ -DOT_VENDOR_EXTENSION=../../src/core/instance/extension_example.cpp # Build Thread 1.3 with no additional features reset_source "$(dirname "$0")"/cmake-build simulation -DOT_THREAD_VERSION=1.3 # Build Thread 1.3 with full features and OT_ASSERT=OFF reset_source "$(dirname "$0")"/cmake-build simulation "${options[@]}" -DOT_DUA=ON -DOT_ASSERT=OFF # Build with RAM settings reset_source "$(dirname "$0")"/cmake-build simulation -DOT_SETTINGS_RAM=ON reset_source "$(dirname "$0")"/cmake-build simulation -DOT_BLE_TCAT=ON } build_nest_common() { local cppflags=( "-DOPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE=1" "-DOPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE=1" "-DOPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE=1" "-DOPENTHREAD_CONFIG_DATASET_UPDATER_ENABLE=1" "-DOPENTHREAD_CONFIG_DIAG_ENABLE=1" "-DOPENTHREAD_CONFIG_JAM_DETECTION_ENABLE=1" "-DOPENTHREAD_CONFIG_MAC_FILTER_ENABLE=1" "-DOPENTHREAD_CONFIG_PING_SENDER_ENABLE=1" "-DOPENTHREAD_CONFIG_NCP_SPI_ENABLE=1" "-DOPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE=1" "-DOPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE=1" ) reset_source mkdir build && cd build CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ cmake -GNinja -DOT_PLATFORM=simulation .. ninja cd .. cppflags=( "-DOPENTHREAD_CONFIG_ANOUNCE_SENDER_ENABLE=1" "-DOPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE=1" "-DOPENTHREAD_CONFIG_TIME_SYNC_ENABLE=1" "-DOPENTHREAD_CONFIG_NCP_HDLC_ENABLE=1" ) reset_source mkdir build && cd build CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ cmake -GNinja -DOT_PLATFORM=simulation .. ninja cd .. cppflags=( "-DOPENTHREAD_CONFIG_NCP_HDLC_ENABLE=1" "-DOPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE=1" ) reset_source mkdir build && cd build CFLAGS="${cppflags[*]} ${CFLAGS}" CXXFLAGS="${cppflags[*]} ${CXXFLAGS}" \ cmake -GNinja -DOT_PLATFORM=simulation \ -DOT_VENDOR_EXTENSION=instance/extension_example.cpp \ -DOT_NCP_VENDOR_HOOK_SOURCE=example_vendor_hook.cpp \ .. ninja cd .. } build_multi_radio_links() { # TREL radio link only. reset_source ./script/cmake-build simulation -DOT_LOG_LEVEL=DEBG \ -DOT_TREL=OFF -DOT_15_4=ON # Multi radio link - 15.4 and TREL. reset_source ./script/cmake-build simulation -DOT_LOG_LEVEL=DEBG \ -DOT_TREL=ON -DOT_15_4=ON } main() { build_all_features build_nest_common build_multi_radio_links } main "$@"