// Place your settings in this file to overwrite default and user settings.
{
    "cmake.configureSettings": {

        // In case your GNU ARM-Toolchain is not installed under the default
        // path:
        //     Windows : No default path. Specify the path where the
        //               toolchain is installed. i.e:
        //               "C:/PROGRA~2/GNUTOO~1/92019-~1".
        //     Linux   : /usr
        //     OSX     : /usr/local
        // It is required to uncomment and to fill the following line.
        //"TOOLCHAIN_PREFIX":"/path/to/toolchain",

        // In case your OpenOCD is not installed under the default path:
        //     Windows : C:/openocd/bin/openocd.exe
        //     Linux   : /usr/bin/openocd
        //     OSX     : /usr/local/bin/openocd
        // Please uncomment the following line and fill it accordingly.
        //"OPENOCD_BIN":"C:/openocd/bin/openocd.exe",

        // Specifies the path to the CMAKE toolchain file.
        "CMAKE_TOOLCHAIN_FILE":"cmake/toolchain-arm-none-eabi.cmake",

        // Determines the application. You can choose between:
        // LoRaMac (Default), ping-pong, rx-sensi, tx-cw.
        "APPLICATION":"LoRaMac",

        // Select LoRaMac sub project. You can choose between:
        // periodic-uplink-lpp, fuota-test-01.
        "SUB_PROJECT":"periodic-uplink-lpp",

        // Select the default LoRaWAN class for periodic-uplink-lpp sub-project
        // In case `CLASS_B` or `CLASS_C` is selected the example will try to
        // switch to the given class as soon as possible
        "LORAWAN_DEFAULT_CLASS":"CLASS_A",

        // Switch for Class B support of LoRaMac:
        "CLASSB_ENABLED":"ON",

        // Select the active region for which the stack will be initialized.
        // You can choose between:
        // LORAMAC_REGION_EU868, LORAMAC_REGION_US915, ..
        "ACTIVE_REGION":"LORAMAC_REGION_EU868",

        // Select the type of modulation, applicable to the ping-pong or
        // rx-sensi applications. You can choose between:
        // LORA or FSK
        "MODULATION":"LORA",

        // Target board, the following boards are supported:
        // NAMote72, NucleoL073 (Default), NucleoL152, NucleoL476, SAMR34, SKiM880B, SKiM980A, SKiM881AXL, B-L072Z-LRWAN1.
        "BOARD":"NucleoL073",

        // MBED Radio shield selection. (Applies only to Nucleo platforms)
        // The following shields are supported:
        // SX1272MB2DAS, SX1276MB1LAS, SX1276MB1MAS, SX1261MBXBAS(Default), SX1262MBXCAS, SX1262MBXDAS, LR1110MB1XXS.
        "MBED_RADIO_SHIELD":"SX1261MBXBAS",

        // Secure element type selection the following are supported
        // SOFT_SE(Default), LR1110_SE, ATECC608A_TNGLORA_SE
        "SECURE_ELEMENT":"SOFT_SE",

        // Secure element is pre-provisioned
        "SECURE_ELEMENT_PRE_PROVISIONED":"ON",

        // Region support activation, Select the ones you want to support.
        // By default only REGION_EU868 support is enabled.
        "REGION_EU868":"ON",
        "REGION_US915":"OFF",
        "REGION_CN779":"OFF",
        "REGION_EU433":"OFF",
        "REGION_AU915":"OFF",
        "REGION_CN470":"OFF",
        "REGION_AS923":"OFF",
        "REGION_KR920":"OFF",
        "REGION_IN865":"OFF",
        "REGION_RU864":"OFF",

        // Default channel plan for region AS923. Possible selections:
        // CHANNEL_PLAN_GROUP_AS923_1, CHANNEL_PLAN_GROUP_AS923_2, CHANNEL_PLAN_GROUP_AS923_3,
        // CHANNEL_PLAN_GROUP_AS923_4, CHANNEL_PLAN_GROUP_AS923_1_JP_CH24_CH38_LBT, 
        // CHANNEL_PLAN_GROUP_AS923_1_JP_CH24_CH38_DC, CHANNEL_PLAN_GROUP_AS923_1_JP_CH37_CH61_LBT_DC
        "REGION_AS923_DEFAULT_CHANNEL_PLAN":"CHANNEL_PLAN_GROUP_AS923_1",

        // Default channel plan for region CN470. Possible selections:
        // CHANNEL_PLAN_20MHZ_TYPE_A, CHANNEL_PLAN_20MHZ_TYPE_B, CHANNEL_PLAN_26MHZ_TYPE_A, CHANNEL_PLAN_26MHZ_TYPE_B
        "REGION_CN470_DEFAULT_CHANNEL_PLAN":"CHANNEL_PLAN_20MHZ_TYPE_A"
    }
}