/** ****************************************************************************** * @file stm32l151xba.h * @author MCD Application Team * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. * This file contains all the peripheral register's definitions, bits * definitions and memory mapping for STM32L1xx devices. * * This file contains: * - Data structures and the address mapping for all peripherals * - Peripheral's registers declarations and bits definition * - Macros to access peripheral’s registers hardware * ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2017 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /** @addtogroup CMSIS * @{ */ /** @addtogroup stm32l151xba * @{ */ #ifndef __STM32L151xBA_H #define __STM32L151xBA_H #ifdef __cplusplus extern "C" { #endif /** @addtogroup Configuration_section_for_CMSIS * @{ */ /** * @brief Configuration of the Cortex-M3 Processor and Core Peripherals */ #define __CM3_REV 0x200U /*!< Cortex-M3 Revision r2p0 */ #define __MPU_PRESENT 1U /*!< STM32L1xx provides MPU */ #define __NVIC_PRIO_BITS 4U /*!< STM32L1xx uses 4 Bits for the Priority Levels */ #define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ /** * @} */ /** @addtogroup Peripheral_interrupt_number_definition * @{ */ /** * @brief STM32L1xx Interrupt Number Definition, according to the selected device * in @ref Library_configuration_section */ /*!< Interrupt Number Definition */ typedef enum { /****** Cortex-M3 Processor Exceptions Numbers ******************************************************/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ SVC_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ /****** STM32L specific Interrupt Numbers ***********************************************************/ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ TAMPER_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Timer through EXTI Line Interrupt */ FLASH_IRQn = 4, /*!< FLASH global Interrupt */ RCC_IRQn = 5, /*!< RCC global Interrupt */ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */ USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt */ DAC_IRQn = 21, /*!< DAC Interrupt */ COMP_IRQn = 22, /*!< Comparator through EXTI Line Interrupt */ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ TIM9_IRQn = 25, /*!< TIM9 global Interrupt */ TIM10_IRQn = 26, /*!< TIM10 global Interrupt */ TIM11_IRQn = 27, /*!< TIM11 global Interrupt */ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ USART1_IRQn = 37, /*!< USART1 global Interrupt */ USART2_IRQn = 38, /*!< USART2 global Interrupt */ USART3_IRQn = 39, /*!< USART3 global Interrupt */ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ USB_FS_WKUP_IRQn = 42, /*!< USB FS WakeUp from suspend through EXTI Line Interrupt */ TIM6_IRQn = 43, /*!< TIM6 global Interrupt */ TIM7_IRQn = 44, /*!< TIM7 global Interrupt */ } IRQn_Type; /** * @} */ #include "core_cm3.h" #include "system_stm32l1xx.h" #include /** @addtogroup Peripheral_registers_structures * @{ */ /** * @brief Analog to Digital Converter */ typedef struct { __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ __IO uint32_t SMPR3; /*!< ADC sample time register 3, Address offset: 0x14 */ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x18 */ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x1C */ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x20 */ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x24 */ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x28 */ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x2C */ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ __IO uint32_t SQR5; /*!< ADC regular sequence register 5, Address offset: 0x40 */ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x44 */ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x48 */ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x4C */ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x50 */ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x54 */ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x58 */ uint32_t RESERVED; /*!< Reserved, Address offset: 0x5C */ } ADC_TypeDef; typedef struct { __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ } ADC_Common_TypeDef; /** * @brief Comparator */ typedef struct { __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ } COMP_TypeDef; typedef struct { __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ } COMP_Common_TypeDef; /** * @brief CRC calculation unit */ typedef struct { __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ } CRC_TypeDef; /** * @brief Digital to Analog Converter */ typedef struct { __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ } DAC_TypeDef; /** * @brief Debug MCU */ typedef struct { __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ }DBGMCU_TypeDef; /** * @brief DMA Controller */ typedef struct { __IO uint32_t CCR; /*!< DMA channel x configuration register */ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ __IO uint32_t CMAR; /*!< DMA channel x memory address register */ } DMA_Channel_TypeDef; typedef struct { __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ } DMA_TypeDef; /** * @brief External Interrupt/Event Controller */ typedef struct { __IO uint32_t IMR; /*!