/******************************************************************************
*  Filename:       ccfg.c
*  Revised:        $Date: 2017-11-02 11:36:28 +0100 (Thu, 02 Nov 2017) $
*  Revision:       $Revision: 18030 $
*
*  Description:    Customer Configuration for:
*                  CC13x2, CC13x4, CC26x2, CC26x4 device family (HW rev 2).
*
*  Copyright (C) 2018 - 2020, Texas Instruments Incorporated - http://www.ti.com/
*
*
*  Redistribution and use in source and binary forms, with or without
*  modification, are permitted provided that the following conditions
*  are met:
*
*    Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/

#ifndef __CCFC_C__
#define __CCFC_C__

#include <stdint.h>
#include "../inc/hw_types.h"
#include "../inc/hw_ccfg.h"
#include "../inc/hw_ccfg_simple_struct.h"

/* Required for Zephyr __ti_ccfg_section macro */
#include <zephyr/linker/sections.h>

//*****************************************************************************
//
// Introduction
//
// This file contains fields used by Boot ROM, startup code, and SW radio 
// stacks to configure chip behavior.
//
// Fields are documented in more details in hw_ccfg.h and CCFG.html in 
// DriverLib documentation (doc_overview.html -> CPU Domain Memory Map -> CCFG).
//
// PLEASE NOTE:
// It is not recommended to do modifications inside the ccfg.c file.
// This file is part of the CoreSDK release and future releases may have
// important modifications and new fields added without notice.
// The recommended method to modify the CCFG settings is to have a separate
// <customer_ccfg>.c file that defines the specific CCFG values to be
// overridden and then include the TI provided ccfg.c at the very end,
// giving default values for non-overriden settings.
//
// Example:
// #define SET_CCFG_BL_CONFIG_BOOTLOADER_ENABLE  0xC5 // Enable ROM boot loader
// #define SET_CCFG_MODE_CONF_SCLK_LF_OPTION     0x3  // LF RCOSC
// //---- Use default values for all others ----
// #include "<project-path>/source/ti/devices/<device>/startup_files/ccfg.c"
// 
//*****************************************************************************

//*****************************************************************************
//
// Internal settings, forcing several bit-fields to be set to a specific value.
//
//*****************************************************************************

//#####################################
// Force VDDR high setting (Higher output power but also higher power consumption)
// This is also called "boost mode"
// WARNING: CCFG_FORCE_VDDR_HH must not be set to 1 if running in external regulator mode.
//#####################################

#ifndef CCFG_FORCE_VDDR_HH
#define CCFG_FORCE_VDDR_HH                              0x0        // Use default VDDR trim
// #define CCFG_FORCE_VDDR_HH                           0x1        // Force VDDR voltage to the factory HH setting (FCFG1..VDDR_TRIM_HH)
#endif

//*****************************************************************************
//
// Set the values of the individual bit fields.
//
//*****************************************************************************

//#####################################
// Alternative DC/DC settings
//#####################################

#ifndef SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_ALT_DCDC_SETTING
#define SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_ALT_DCDC_SETTING    0x0    // Alternative DC/DC setting enabled
// #define SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_ALT_DCDC_SETTING 0x1    // Alternative DC/DC setting disabled
#endif

#if ( CCFG_FORCE_VDDR_HH )
#define SET_CCFG_MODE_CONF_1_ALT_DCDC_VMIN                  0xC    // Special VMIN level (2.5V) when forced VDDR HH voltage
#else
#ifndef SET_CCFG_MODE_CONF_1_ALT_DCDC_VMIN
#define SET_CCFG_MODE_CONF_1_ALT_DCDC_VMIN                  0x8    // 2.25V
#endif
#endif

#ifndef SET_CCFG_MODE_CONF_1_ALT_DCDC_DITHER_EN
#define SET_CCFG_MODE_CONF_1_ALT_DCDC_DITHER_EN         0x0        // Dithering disabled
// #define SET_CCFG_MODE_CONF_1_ALT_DCDC_DITHER_EN      0x1        // Dithering enabled
#endif

#ifndef SET_CCFG_MODE_CONF_1_ALT_DCDC_IPEAK
#define SET_CCFG_MODE_CONF_1_ALT_DCDC_IPEAK             0x0        // Peak current
#endif

//#####################################
// XOSC override settings
//#####################################

#ifndef SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_XOSC_OVR
// #define SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_XOSC_OVR     0x0        // Enable override
#define SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_XOSC_OVR        0x1        // Disable override
#endif

#ifndef SET_CCFG_MODE_CONF_1_DELTA_IBIAS_INIT
#define SET_CCFG_MODE_CONF_1_DELTA_IBIAS_INIT           0x0        // Delta = 0
#endif

#ifndef SET_CCFG_MODE_CONF_1_DELTA_IBIAS_OFFSET
#define SET_CCFG_MODE_CONF_1_DELTA_IBIAS_OFFSET         0x0        // Delta = 0
#endif

#ifndef SET_CCFG_MODE_CONF_1_XOSC_MAX_START
#define SET_CCFG_MODE_CONF_1_XOSC_MAX_START             0x10       // 1600us
#endif

//#####################################
// Power settings
//#####################################

#ifndef SET_CCFG_MODE_CONF_VDDR_TRIM_SLEEP_DELTA
#define SET_CCFG_MODE_CONF_VDDR_TRIM_SLEEP_DELTA        0xF        // Signed delta value +1 to apply to the VDDR_TRIM_SLEEP target (0xF=-1=default=no compensation)
#endif

#ifndef SET_CCFG_MODE_CONF_DCDC_RECHARGE
#define SET_CCFG_MODE_CONF_DCDC_RECHARGE                0x0        // Use the DC/DC during recharge in powerdown
// #define SET_CCFG_MODE_CONF_DCDC_RECHARGE             0x1        // Do not use the DC/DC during recharge in powerdown
#endif

#ifndef SET_CCFG_MODE_CONF_DCDC_ACTIVE
#define SET_CCFG_MODE_CONF_DCDC_ACTIVE                  0x0        // Use the DC/DC during active mode
// #define SET_CCFG_MODE_CONF_DCDC_ACTIVE               0x1        // Do not use the DC/DC during active mode
#endif

#if ( CCFG_FORCE_VDDR_HH )
#define SET_CCFG_MODE_CONF_VDDS_BOD_LEVEL               0x1        // Special setting to enable forced VDDR HH voltage
#else
#ifndef SET_CCFG_MODE_CONF_VDDS_BOD_LEVEL
// #define SET_CCFG_MODE_CONF_VDDS_BOD_LEVEL            0x0        // VDDS BOD level is 2.0V
#define SET_CCFG_MODE_CONF_VDDS_BOD_LEVEL               0x1        // VDDS BOD level is 1.8V (or 1.65V for external regulator mode)
#endif
#endif

#ifndef SET_CCFG_MODE_CONF_VDDR_CAP
#define SET_CCFG_MODE_CONF_VDDR_CAP                     0x3A       // Unsigned 8-bit integer representing the min. decoupling capacitance on VDDR in units of 100nF
#endif

#ifndef SET_CCFG_MODE_CONF_VDDR_TRIM_SLEEP_TC
#define SET_CCFG_MODE_CONF_VDDR_TRIM_SLEEP_TC           0x1        // Temperature compensation on VDDR sleep trim disabled (default)
// #define SET_CCFG_MODE_CONF_VDDR_TRIM_SLEEP_TC        0x0        // Temperature compensation on VDDR sleep trim enabled
#endif

//#####################################
// Clock settings
//#####################################

#ifndef SET_CCFG_MODE_CONF_SCLK_LF_OPTION
// #define SET_CCFG_MODE_CONF_SCLK_LF_OPTION            0x0        // LF clock derived from HF clock. Note: using this configuration will block the device from entering Standby mode.
// #define SET_CCFG_MODE_CONF_SCLK_LF_OPTION            0x1        // External LF clock
#define SET_CCFG_MODE_CONF_SCLK_LF_OPTION               0x2        // LF XOSC
// #define SET_CCFG_MODE_CONF_SCLK_LF_OPTION            0x3        // LF RCOSC
#endif

#ifndef SET_CCFG_MODE_CONF_XOSC_CAP_MOD
// #define SET_CCFG_MODE_CONF_XOSC_CAP_MOD              0x0        // Apply cap-array delta
#define SET_CCFG_MODE_CONF_XOSC_CAP_MOD                 0x1        // Don't apply cap-array delta 
#endif

#ifndef SET_CCFG_MODE_CONF_XOSC_CAPARRAY_DELTA
#define SET_CCFG_MODE_CONF_XOSC_CAPARRAY_DELTA          0xFF       // Signed 8-bit value, directly modifying trimmed XOSC cap-array value
#endif

#ifndef SET_CCFG_EXT_LF_CLK_DIO
#define SET_CCFG_EXT_LF_CLK_DIO                         0x01       // DIO number if using external LF clock
#endif

#ifndef SET_CCFG_EXT_LF_CLK_RTC_INCREMENT
#define SET_CCFG_EXT_LF_CLK_RTC_INCREMENT               0x800000   // RTC increment representing the external LF clock frequency
#endif

//#####################################
// Special HF clock source setting
//#####################################
#ifndef SET_CCFG_MODE_CONF_XOSC_FREQ
// #define SET_CCFG_MODE_CONF_XOSC_FREQ                 0x0        // HF source is 48 MHz TCXO
// #define SET_CCFG_MODE_CONF_XOSC_FREQ                 0x1        // HF source is HPOSC (BAW) (only valid for CC2652RB)
#define SET_CCFG_MODE_CONF_XOSC_FREQ                    0x2        // HF source is a 48 MHz xtal
// #define SET_CCFG_MODE_CONF_XOSC_FREQ                 0x3        // HF source is a 24 MHz xtal (not supported)
#endif

//#####################################
// Bootloader settings
//#####################################

#ifndef SET_CCFG_BL_CONFIG_BOOTLOADER_ENABLE
#define SET_CCFG_BL_CONFIG_BOOTLOADER_ENABLE            0x00       // Disable ROM boot loader
// #define SET_CCFG_BL_CONFIG_BOOTLOADER_ENABLE         0xC5       // Enable ROM boot loader
#endif

#ifndef SET_CCFG_BL_CONFIG_BL_LEVEL
// #define SET_CCFG_BL_CONFIG_BL_LEVEL                  0x0        // Active low to open boot loader backdoor
#define SET_CCFG_BL_CONFIG_BL_LEVEL                     0x1        // Active high to open boot loader backdoor
#endif

#ifndef SET_CCFG_BL_CONFIG_BL_PIN_NUMBER
#define SET_CCFG_BL_CONFIG_BL_PIN_NUMBER                0xFF       // DIO number for boot loader backdoor
#endif

#ifndef SET_CCFG_BL_CONFIG_BL_ENABLE
// #define SET_CCFG_BL_CONFIG_BL_ENABLE                 0xC5       // Enabled boot loader backdoor
#define SET_CCFG_BL_CONFIG_BL_ENABLE                    0xFF       // Disabled boot loader backdoor
#endif

//#####################################
// Debug access settings
//#####################################

#ifndef SET_CCFG_CCFG_TI_OPTIONS_TI_FA_ENABLE
#define SET_CCFG_CCFG_TI_OPTIONS_TI_FA_ENABLE           0x00       // Disable unlocking of TI FA option.
// #define SET_CCFG_CCFG_TI_OPTIONS_TI_FA_ENABLE        0xC5       // Enable unlocking of TI FA option with the unlock code
#endif

#ifndef SET_CCFG_CCFG_TAP_DAP_0_CPU_DAP_ENABLE
// #define SET_CCFG_CCFG_TAP_DAP_0_CPU_DAP_ENABLE       0x00       // Access disabled
#define SET_CCFG_CCFG_TAP_DAP_0_CPU_DAP_ENABLE          0xC5       // Access enabled if also enabled in FCFG
#endif

#ifndef SET_CCFG_CCFG_TAP_DAP_0_PWRPROF_TAP_ENABLE
//#define SET_CCFG_CCFG_TAP_DAP_0_PWRPROF_TAP_ENABLE    0x00       // Access disabled
#define SET_CCFG_CCFG_TAP_DAP_0_PWRPROF_TAP_ENABLE      0xC5       // Access enabled if also enabled in FCFG
#endif

#ifndef SET_CCFG_CCFG_TAP_DAP_0_TEST_TAP_ENABLE
#define SET_CCFG_CCFG_TAP_DAP_0_TEST_TAP_ENABLE         0x00       // Access disabled
//#define SET_CCFG_CCFG_TAP_DAP_0_TEST_TAP_ENABLE       0xC5       // Access enabled if also enabled in FCFG
#endif

#ifndef SET_CCFG_CCFG_TAP_DAP_1_PBIST2_TAP_ENABLE
#define SET_CCFG_CCFG_TAP_DAP_1_PBIST2_TAP_ENABLE       0x00       // Access disabled
// #define SET_CCFG_CCFG_TAP_DAP_1_PBIST2_TAP_ENABLE    0xC5       // Access enabled if also enabled in FCFG
#endif

#ifndef SET_CCFG_CCFG_TAP_DAP_1_PBIST1_TAP_ENABLE
#define SET_CCFG_CCFG_TAP_DAP_1_PBIST1_TAP_ENABLE       0x00       // Access disabled
// #define SET_CCFG_CCFG_TAP_DAP_1_PBIST1_TAP_ENABLE    0xC5       // Access enabled if also enabled in FCFG
#endif

#ifndef SET_CCFG_CCFG_TAP_DAP_1_AON_TAP_ENABLE
#define SET_CCFG_CCFG_TAP_DAP_1_AON_TAP_ENABLE          0x00       // Access disabled
// #define SET_CCFG_CCFG_TAP_DAP_1_AON_TAP_ENABLE       0xC5       // Access enabled if also enabled in FCFG
#endif

//#####################################
// Alternative IEEE 802.15.4 MAC address
//#####################################
#ifndef SET_CCFG_IEEE_MAC_0
#define SET_CCFG_IEEE_MAC_0                             0xFFFFFFFF // Bits [31:0]
#endif

#ifndef SET_CCFG_IEEE_MAC_1
#define SET_CCFG_IEEE_MAC_1                             0xFFFFFFFF // Bits [63:32]
#endif

//#####################################
// Alternative BLE address
//#####################################
#ifndef SET_CCFG_IEEE_BLE_0
#define SET_CCFG_IEEE_BLE_0                             0xFFFFFFFF // Bits [31:0]
#endif

#ifndef SET_CCFG_IEEE_BLE_1
#define SET_CCFG_IEEE_BLE_1                             0xFFFFFFFF // Bits [63:32]
#endif

//#####################################
// Flash erase settings
//#####################################

#ifndef SET_CCFG_ERASE_CONF_CHIP_ERASE_DIS_N
// #define SET_CCFG_ERASE_CONF_CHIP_ERASE_DIS_N         0x0        // Any chip erase request detected during boot will be ignored
#define SET_CCFG_ERASE_CONF_CHIP_ERASE_DIS_N            0x1        // Any chip erase request detected during boot will be performed by the boot FW
#endif

#ifndef SET_CCFG_ERASE_CONF_BANK_ERASE_DIS_N
// #define SET_CCFG_ERASE_CONF_BANK_ERASE_DIS_N         0x0        // Disable the boot loader bank erase function
#define SET_CCFG_ERASE_CONF_BANK_ERASE_DIS_N            0x1        // Enable the boot loader bank erase function
#endif

//#####################################
// Flash image valid
//#####################################
#ifndef SET_CCFG_IMAGE_VALID_CONF_IMAGE_VALID
#define SET_CCFG_IMAGE_VALID_CONF_IMAGE_VALID           0x00000000                  // Flash image vector table is at address 0x00000000 (default)
// #define SET_CCFG_IMAGE_VALID_CONF_IMAGE_VALID        <valid_vector_table_addr>   // Flash image vector table is at address <valid_vector_table_addr>
// #define SET_CCFG_IMAGE_VALID_CONF_IMAGE_VALID        <invalid_vector_table_addr> // Flash image vector table address is invalid. ROM boot loader is called.
#endif

//#####################################
// Flash sector write protection
//#####################################
#ifndef SET_CCFG_CCFG_PROT_31_0
#define SET_CCFG_CCFG_PROT_31_0                         0xFFFFFFFF
#endif

#ifndef SET_CCFG_CCFG_PROT_63_32
#define SET_CCFG_CCFG_PROT_63_32                        0xFFFFFFFF
#endif

#ifndef SET_CCFG_CCFG_PROT_95_64
#define SET_CCFG_CCFG_PROT_95_64                        0xFFFFFFFF
#endif

#ifndef SET_CCFG_CCFG_PROT_127_96
#define SET_CCFG_CCFG_PROT_127_96                       0xFFFFFFFF
#endif

//#####################################
// Select between cache or GPRAM
//#####################################
#ifndef SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_GPRAM
// #define SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_GPRAM        0x0        // Cache is disabled and GPRAM is available at 0x11000000-0x11001FFF
#define SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_GPRAM           0x1        // Cache is enabled and GPRAM is disabled (unavailable)
#endif

//#####################################
// TCXO settings
//#####################################
#ifndef SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_TCXO
#define SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_TCXO            0x1        // Deprecated. Must be set to 0x1.
#endif

#ifndef SET_CCFG_MODE_CONF_1_TCXO_TYPE
#define SET_CCFG_MODE_CONF_1_TCXO_TYPE                  0x1        // 1 = Clipped-sine type.
//#define SET_CCFG_MODE_CONF_1_TCXO_TYPE                0x0        // 0 = CMOS type.
#endif

#ifndef SET_CCFG_MODE_CONF_1_TCXO_MAX_START
#define SET_CCFG_MODE_CONF_1_TCXO_MAX_START             0x7F       // Maximum TCXO startup time in units of 100us.
#endif

//*****************************************************************************
//
// CCFG values that should not be modified.
//
//*****************************************************************************
#define SET_CCFG_SIZE_AND_DIS_FLAGS_SIZE_OF_CCFG        0x0058
#define SET_CCFG_SIZE_AND_DIS_FLAGS_DISABLE_FLAGS       (CCFG_SIZE_AND_DIS_FLAGS_DISABLE_FLAGS_M >> CCFG_SIZE_AND_DIS_FLAGS_DISABLE_FLAGS_S)

#if ( CCFG_FORCE_VDDR_HH )
#define SET_CCFG_MODE_CONF_VDDR_EXT_LOAD                0x0        // Special setting to enable forced VDDR HH voltage
#else
#define SET_CCFG_MODE_CONF_VDDR_EXT_LOAD                0x1
#endif

#define SET_CCFG_MODE_CONF_RTC_COMP                     0x1
#define SET_CCFG_MODE_CONF_HF_COMP                      0x1

#define SET_CCFG_VOLT_LOAD_0_VDDR_EXT_TP45              0xFF
#define SET_CCFG_VOLT_LOAD_0_VDDR_EXT_TP25              0xFF
#define SET_CCFG_VOLT_LOAD_0_VDDR_EXT_TP5               0xFF
#define SET_CCFG_VOLT_LOAD_0_VDDR_EXT_TM15              0xFF

#define SET_CCFG_VOLT_LOAD_1_VDDR_EXT_TP125             0xFF
#define SET_CCFG_VOLT_LOAD_1_VDDR_EXT_TP105             0xFF
#define SET_CCFG_VOLT_LOAD_1_VDDR_EXT_TP85              0xFF
#define SET_CCFG_VOLT_LOAD_1_VDDR_EXT_TP65              0xFF

#define SET_CCFG_RTC_OFFSET_RTC_COMP_P0                 0xFFFF
#define SET_CCFG_RTC_OFFSET_RTC_COMP_P1                 0xFF
#define SET_CCFG_RTC_OFFSET_RTC_COMP_P2                 0xFF

#define SET_CCFG_FREQ_OFFSET_HF_COMP_P0                 0xFFFF
#define SET_CCFG_FREQ_OFFSET_HF_COMP_P1                 0xFF
#define SET_CCFG_FREQ_OFFSET_HF_COMP_P2                 0xFF

//*****************************************************************************
//
// Concatenate bit fields to words.
// DO NOT EDIT!
//
//*****************************************************************************
#define DEFAULT_CCFG_EXT_LF_CLK          ( \
	 ((((uint32_t)( SET_CCFG_EXT_LF_CLK_DIO                          )) << CCFG_EXT_LF_CLK_DIO_S                          ) | ~CCFG_EXT_LF_CLK_DIO_M                          ) & \
	 ((((uint32_t)( SET_CCFG_EXT_LF_CLK_RTC_INCREMENT                )) << CCFG_EXT_LF_CLK_RTC_INCREMENT_S                ) | ~CCFG_EXT_LF_CLK_RTC_INCREMENT_M                ) )

#define DEFAULT_CCFG_MODE_CONF_1         ( \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_1_TCXO_TYPE                   )) << CCFG_MODE_CONF_1_TCXO_TYPE_S                   ) | ~CCFG_MODE_CONF_1_TCXO_TYPE_M                   ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_1_TCXO_MAX_START              )) << CCFG_MODE_CONF_1_TCXO_MAX_START_S              ) | ~CCFG_MODE_CONF_1_TCXO_MAX_START_M              ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_1_ALT_DCDC_VMIN               )) << CCFG_MODE_CONF_1_ALT_DCDC_VMIN_S               ) | ~CCFG_MODE_CONF_1_ALT_DCDC_VMIN_M               ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_1_ALT_DCDC_DITHER_EN          )) << CCFG_MODE_CONF_1_ALT_DCDC_DITHER_EN_S          ) | ~CCFG_MODE_CONF_1_ALT_DCDC_DITHER_EN_M          ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_1_ALT_DCDC_IPEAK              )) << CCFG_MODE_CONF_1_ALT_DCDC_IPEAK_S              ) | ~CCFG_MODE_CONF_1_ALT_DCDC_IPEAK_M              ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_1_DELTA_IBIAS_INIT            )) << CCFG_MODE_CONF_1_DELTA_IBIAS_INIT_S            ) | ~CCFG_MODE_CONF_1_DELTA_IBIAS_INIT_M            ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_1_DELTA_IBIAS_OFFSET          )) << CCFG_MODE_CONF_1_DELTA_IBIAS_OFFSET_S          ) | ~CCFG_MODE_CONF_1_DELTA_IBIAS_OFFSET_M          ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_1_XOSC_MAX_START              )) << CCFG_MODE_CONF_1_XOSC_MAX_START_S              ) | ~CCFG_MODE_CONF_1_XOSC_MAX_START_M              ) )

#define DEFAULT_CCFG_SIZE_AND_DIS_FLAGS  ( \
	 ((((uint32_t)( SET_CCFG_SIZE_AND_DIS_FLAGS_SIZE_OF_CCFG         )) << CCFG_SIZE_AND_DIS_FLAGS_SIZE_OF_CCFG_S         ) | ~CCFG_SIZE_AND_DIS_FLAGS_SIZE_OF_CCFG_M         ) & \
	 ((((uint32_t)( SET_CCFG_SIZE_AND_DIS_FLAGS_DISABLE_FLAGS        )) << CCFG_SIZE_AND_DIS_FLAGS_DISABLE_FLAGS_S        ) | ~CCFG_SIZE_AND_DIS_FLAGS_DISABLE_FLAGS_M        ) & \
	 ((((uint32_t)( SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_TCXO             )) << CCFG_SIZE_AND_DIS_FLAGS_DIS_TCXO_S             ) | ~CCFG_SIZE_AND_DIS_FLAGS_DIS_TCXO_M             ) & \
	 ((((uint32_t)( SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_GPRAM            )) << CCFG_SIZE_AND_DIS_FLAGS_DIS_GPRAM_S            ) | ~CCFG_SIZE_AND_DIS_FLAGS_DIS_GPRAM_M            ) & \
	 ((((uint32_t)( SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_ALT_DCDC_SETTING )) << CCFG_SIZE_AND_DIS_FLAGS_DIS_ALT_DCDC_SETTING_S ) | ~CCFG_SIZE_AND_DIS_FLAGS_DIS_ALT_DCDC_SETTING_M ) & \
	 ((((uint32_t)( SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_XOSC_OVR         )) << CCFG_SIZE_AND_DIS_FLAGS_DIS_XOSC_OVR_S         ) | ~CCFG_SIZE_AND_DIS_FLAGS_DIS_XOSC_OVR_M         ) )

#define DEFAULT_CCFG_MODE_CONF           ( \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_VDDR_TRIM_SLEEP_DELTA         )) << CCFG_MODE_CONF_VDDR_TRIM_SLEEP_DELTA_S         ) | ~CCFG_MODE_CONF_VDDR_TRIM_SLEEP_DELTA_M         ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_DCDC_RECHARGE                 )) << CCFG_MODE_CONF_DCDC_RECHARGE_S                 ) | ~CCFG_MODE_CONF_DCDC_RECHARGE_M                 ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_DCDC_ACTIVE                   )) << CCFG_MODE_CONF_DCDC_ACTIVE_S                   ) | ~CCFG_MODE_CONF_DCDC_ACTIVE_M                   ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_VDDR_EXT_LOAD                 )) << CCFG_MODE_CONF_VDDR_EXT_LOAD_S                 ) | ~CCFG_MODE_CONF_VDDR_EXT_LOAD_M                 ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_VDDS_BOD_LEVEL                )) << CCFG_MODE_CONF_VDDS_BOD_LEVEL_S                ) | ~CCFG_MODE_CONF_VDDS_BOD_LEVEL_M                ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_SCLK_LF_OPTION                )) << CCFG_MODE_CONF_SCLK_LF_OPTION_S                ) | ~CCFG_MODE_CONF_SCLK_LF_OPTION_M                ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_VDDR_TRIM_SLEEP_TC            )) << CCFG_MODE_CONF_VDDR_TRIM_SLEEP_TC_S            ) | ~CCFG_MODE_CONF_VDDR_TRIM_SLEEP_TC_M            ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_RTC_COMP                      )) << CCFG_MODE_CONF_RTC_COMP_S                      ) | ~CCFG_MODE_CONF_RTC_COMP_M                      ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_XOSC_FREQ                     )) << CCFG_MODE_CONF_XOSC_FREQ_S                     ) | ~CCFG_MODE_CONF_XOSC_FREQ_M                     ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_XOSC_CAP_MOD                  )) << CCFG_MODE_CONF_XOSC_CAP_MOD_S                  ) | ~CCFG_MODE_CONF_XOSC_CAP_MOD_M                  ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_HF_COMP                       )) << CCFG_MODE_CONF_HF_COMP_S                       ) | ~CCFG_MODE_CONF_HF_COMP_M                       ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_XOSC_CAPARRAY_DELTA           )) << CCFG_MODE_CONF_XOSC_CAPARRAY_DELTA_S           ) | ~CCFG_MODE_CONF_XOSC_CAPARRAY_DELTA_M           ) & \
	 ((((uint32_t)( SET_CCFG_MODE_CONF_VDDR_CAP                      )) << CCFG_MODE_CONF_VDDR_CAP_S                      ) | ~CCFG_MODE_CONF_VDDR_CAP_M                      ) )

#define DEFAULT_CCFG_VOLT_LOAD_0         ( \
	 ((((uint32_t)( SET_CCFG_VOLT_LOAD_0_VDDR_EXT_TP45               )) << CCFG_VOLT_LOAD_0_VDDR_EXT_TP45_S               ) | ~CCFG_VOLT_LOAD_0_VDDR_EXT_TP45_M               ) & \
	 ((((uint32_t)( SET_CCFG_VOLT_LOAD_0_VDDR_EXT_TP25               )) << CCFG_VOLT_LOAD_0_VDDR_EXT_TP25_S               ) | ~CCFG_VOLT_LOAD_0_VDDR_EXT_TP25_M               ) & \
	 ((((uint32_t)( SET_CCFG_VOLT_LOAD_0_VDDR_EXT_TP5                )) << CCFG_VOLT_LOAD_0_VDDR_EXT_TP5_S                ) | ~CCFG_VOLT_LOAD_0_VDDR_EXT_TP5_M                ) & \
	 ((((uint32_t)( SET_CCFG_VOLT_LOAD_0_VDDR_EXT_TM15               )) << CCFG_VOLT_LOAD_0_VDDR_EXT_TM15_S               ) | ~CCFG_VOLT_LOAD_0_VDDR_EXT_TM15_M               ) )

#define DEFAULT_CCFG_VOLT_LOAD_1         ( \
	 ((((uint32_t)( SET_CCFG_VOLT_LOAD_1_VDDR_EXT_TP125              )) << CCFG_VOLT_LOAD_1_VDDR_EXT_TP125_S              ) | ~CCFG_VOLT_LOAD_1_VDDR_EXT_TP125_M              ) & \
	 ((((uint32_t)( SET_CCFG_VOLT_LOAD_1_VDDR_EXT_TP105              )) << CCFG_VOLT_LOAD_1_VDDR_EXT_TP105_S              ) | ~CCFG_VOLT_LOAD_1_VDDR_EXT_TP105_M              ) & \
	 ((((uint32_t)( SET_CCFG_VOLT_LOAD_1_VDDR_EXT_TP85               )) << CCFG_VOLT_LOAD_1_VDDR_EXT_TP85_S               ) | ~CCFG_VOLT_LOAD_1_VDDR_EXT_TP85_M               ) & \
	 ((((uint32_t)( SET_CCFG_VOLT_LOAD_1_VDDR_EXT_TP65               )) << CCFG_VOLT_LOAD_1_VDDR_EXT_TP65_S               ) | ~CCFG_VOLT_LOAD_1_VDDR_EXT_TP65_M               ) )

#define DEFAULT_CCFG_RTC_OFFSET          ( \
	 ((((uint32_t)( SET_CCFG_RTC_OFFSET_RTC_COMP_P0                  )) << CCFG_RTC_OFFSET_RTC_COMP_P0_S                  ) | ~CCFG_RTC_OFFSET_RTC_COMP_P0_M                  ) & \
	 ((((uint32_t)( SET_CCFG_RTC_OFFSET_RTC_COMP_P1                  )) << CCFG_RTC_OFFSET_RTC_COMP_P1_S                  ) | ~CCFG_RTC_OFFSET_RTC_COMP_P1_M                  ) & \
	 ((((uint32_t)( SET_CCFG_RTC_OFFSET_RTC_COMP_P2                  )) << CCFG_RTC_OFFSET_RTC_COMP_P2_S                  ) | ~CCFG_RTC_OFFSET_RTC_COMP_P2_M                  ) )

#define DEFAULT_CCFG_FREQ_OFFSET         ( \
	 ((((uint32_t)( SET_CCFG_FREQ_OFFSET_HF_COMP_P0                  )) << CCFG_FREQ_OFFSET_HF_COMP_P0_S                  ) | ~CCFG_FREQ_OFFSET_HF_COMP_P0_M                  ) & \
	 ((((uint32_t)( SET_CCFG_FREQ_OFFSET_HF_COMP_P1                  )) << CCFG_FREQ_OFFSET_HF_COMP_P1_S                  ) | ~CCFG_FREQ_OFFSET_HF_COMP_P1_M                  ) & \
	 ((((uint32_t)( SET_CCFG_FREQ_OFFSET_HF_COMP_P2                  )) << CCFG_FREQ_OFFSET_HF_COMP_P2_S                  ) | ~CCFG_FREQ_OFFSET_HF_COMP_P2_M                  ) )

#define DEFAULT_CCFG_IEEE_MAC_0          SET_CCFG_IEEE_MAC_0
#define DEFAULT_CCFG_IEEE_MAC_1          SET_CCFG_IEEE_MAC_1
#define DEFAULT_CCFG_IEEE_BLE_0          SET_CCFG_IEEE_BLE_0
#define DEFAULT_CCFG_IEEE_BLE_1          SET_CCFG_IEEE_BLE_1

#define DEFAULT_CCFG_BL_CONFIG           ( \
	 ((((uint32_t)( SET_CCFG_BL_CONFIG_BOOTLOADER_ENABLE             )) << CCFG_BL_CONFIG_BOOTLOADER_ENABLE_S             ) | ~CCFG_BL_CONFIG_BOOTLOADER_ENABLE_M             ) & \
	 ((((uint32_t)( SET_CCFG_BL_CONFIG_BL_LEVEL                      )) << CCFG_BL_CONFIG_BL_LEVEL_S                      ) | ~CCFG_BL_CONFIG_BL_LEVEL_M                      ) & \
	 ((((uint32_t)( SET_CCFG_BL_CONFIG_BL_PIN_NUMBER                 )) << CCFG_BL_CONFIG_BL_PIN_NUMBER_S                 ) | ~CCFG_BL_CONFIG_BL_PIN_NUMBER_M                 ) & \
	 ((((uint32_t)( SET_CCFG_BL_CONFIG_BL_ENABLE                     )) << CCFG_BL_CONFIG_BL_ENABLE_S                     ) | ~CCFG_BL_CONFIG_BL_ENABLE_M                     ) )

#define DEFAULT_CCFG_ERASE_CONF          ( \
	 ((((uint32_t)( SET_CCFG_ERASE_CONF_CHIP_ERASE_DIS_N             )) << CCFG_ERASE_CONF_CHIP_ERASE_DIS_N_S             ) | ~CCFG_ERASE_CONF_CHIP_ERASE_DIS_N_M             ) & \
	 ((((uint32_t)( SET_CCFG_ERASE_CONF_BANK_ERASE_DIS_N             )) << CCFG_ERASE_CONF_BANK_ERASE_DIS_N_S             ) | ~CCFG_ERASE_CONF_BANK_ERASE_DIS_N_M             ) )

#define DEFAULT_CCFG_CCFG_TI_OPTIONS     ( \
	 ((((uint32_t)( SET_CCFG_CCFG_TI_OPTIONS_TI_FA_ENABLE            )) << CCFG_CCFG_TI_OPTIONS_TI_FA_ENABLE_S            ) | ~CCFG_CCFG_TI_OPTIONS_TI_FA_ENABLE_M            ) )

#define DEFAULT_CCFG_CCFG_TAP_DAP_0      ( \
	 ((((uint32_t)( SET_CCFG_CCFG_TAP_DAP_0_CPU_DAP_ENABLE           )) << CCFG_CCFG_TAP_DAP_0_CPU_DAP_ENABLE_S           ) | ~CCFG_CCFG_TAP_DAP_0_CPU_DAP_ENABLE_M           ) & \
	 ((((uint32_t)( SET_CCFG_CCFG_TAP_DAP_0_PWRPROF_TAP_ENABLE       )) << CCFG_CCFG_TAP_DAP_0_PWRPROF_TAP_ENABLE_S       ) | ~CCFG_CCFG_TAP_DAP_0_PWRPROF_TAP_ENABLE_M       ) & \
	 ((((uint32_t)( SET_CCFG_CCFG_TAP_DAP_0_TEST_TAP_ENABLE          )) << CCFG_CCFG_TAP_DAP_0_TEST_TAP_ENABLE_S          ) | ~CCFG_CCFG_TAP_DAP_0_TEST_TAP_ENABLE_M          ) )

#define DEFAULT_CCFG_CCFG_TAP_DAP_1      ( \
	 ((((uint32_t)( SET_CCFG_CCFG_TAP_DAP_1_PBIST2_TAP_ENABLE        )) << CCFG_CCFG_TAP_DAP_1_PBIST2_TAP_ENABLE_S        ) | ~CCFG_CCFG_TAP_DAP_1_PBIST2_TAP_ENABLE_M        ) & \
	 ((((uint32_t)( SET_CCFG_CCFG_TAP_DAP_1_PBIST1_TAP_ENABLE        )) << CCFG_CCFG_TAP_DAP_1_PBIST1_TAP_ENABLE_S        ) | ~CCFG_CCFG_TAP_DAP_1_PBIST1_TAP_ENABLE_M        ) & \
	 ((((uint32_t)( SET_CCFG_CCFG_TAP_DAP_1_AON_TAP_ENABLE           )) << CCFG_CCFG_TAP_DAP_1_AON_TAP_ENABLE_S           ) | ~CCFG_CCFG_TAP_DAP_1_AON_TAP_ENABLE_M           ) )

#define DEFAULT_CCFG_IMAGE_VALID_CONF    SET_CCFG_IMAGE_VALID_CONF_IMAGE_VALID

#define DEFAULT_CCFG_CCFG_PROT_31_0      SET_CCFG_CCFG_PROT_31_0  
#define DEFAULT_CCFG_CCFG_PROT_63_32     SET_CCFG_CCFG_PROT_63_32 
#define DEFAULT_CCFG_CCFG_PROT_95_64     SET_CCFG_CCFG_PROT_95_64 
#define DEFAULT_CCFG_CCFG_PROT_127_96    SET_CCFG_CCFG_PROT_127_96

//*****************************************************************************
//
// Customer Configuration Area in Lock Page
//
//*****************************************************************************
#if defined(__IAR_SYSTEMS_ICC__)
__root const ccfg_t __ccfg @ ".ccfg" =
#elif defined(__TI_COMPILER_VERSION__)
#pragma DATA_SECTION(__ccfg, ".ccfg")
#pragma RETAIN(__ccfg)
const ccfg_t __ccfg =
#else
/* Modified for Zephyr to use __ti_ccfg_section */
const ccfg_t __ti_ccfg_section __ccfg =
#endif
{                                     // Mapped to address
    DEFAULT_CCFG_EXT_LF_CLK         , // 0x50003FA8 (0x50003xxx maps to last
    DEFAULT_CCFG_MODE_CONF_1        , // 0x50003FAC  sector in FLASH.
    DEFAULT_CCFG_SIZE_AND_DIS_FLAGS , // 0x50003FB0  Independent of FLASH size)
    DEFAULT_CCFG_MODE_CONF          , // 0x50003FB4
    DEFAULT_CCFG_VOLT_LOAD_0        , // 0x50003FB8 
    DEFAULT_CCFG_VOLT_LOAD_1        , // 0x50003FBC
    DEFAULT_CCFG_RTC_OFFSET         , // 0x50003FC0
    DEFAULT_CCFG_FREQ_OFFSET        , // 0x50003FC4
    DEFAULT_CCFG_IEEE_MAC_0         , // 0x50003FC8
    DEFAULT_CCFG_IEEE_MAC_1         , // 0x50003FCC
    DEFAULT_CCFG_IEEE_BLE_0         , // 0x50003FD0
    DEFAULT_CCFG_IEEE_BLE_1         , // 0x50003FD4
    DEFAULT_CCFG_BL_CONFIG          , // 0x50003FD8
    DEFAULT_CCFG_ERASE_CONF         , // 0x50003FDC
    DEFAULT_CCFG_CCFG_TI_OPTIONS    , // 0x50003FE0
    DEFAULT_CCFG_CCFG_TAP_DAP_0     , // 0x50003FE4
    DEFAULT_CCFG_CCFG_TAP_DAP_1     , // 0x50003FE8
    DEFAULT_CCFG_IMAGE_VALID_CONF   , // 0x50003FEC
    DEFAULT_CCFG_CCFG_PROT_31_0     , // 0x50003FF0
    DEFAULT_CCFG_CCFG_PROT_63_32    , // 0x50003FF4
    DEFAULT_CCFG_CCFG_PROT_95_64    , // 0x50003FF8
    DEFAULT_CCFG_CCFG_PROT_127_96   , // 0x50003FFC
};

#endif // __CCFC_C__