/* * cc_pal.h - CC32xx Host Driver Implementation * * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ * * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the * distribution. * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /****************************************************************************** * cc_pal.h * * SimpleLink Wi-Fi abstraction file for CC32xx ******************************************************************************/ #ifndef __CC31xx_PAL_H__ #define __CC31xx_PAL_H__ #ifdef __cplusplus extern "C" { #endif #include #if defined(SL_PLATFORM_MULTI_THREADED) /* Use Zephyr posix headers */ #include #include #include #include #else //SL_PLATFORM_MULTI_THREADED #include #include #endif #define MAX_QUEUE_SIZE (4) #define OS_WAIT_FOREVER (0xFFFFFFFF) #define OS_NO_WAIT (0) #define OS_OK (0) #define Semaphore_OK (0) #define Semaphore_FAILURE (-1) #define Mutex_OK (0) #define Mutex_FAILURE (-1) /*! \brief type definition for the SPI channel file descriptor \note On each porting or platform the type could be whatever is needed - integer, pointer to structure etc. */ typedef int Fd_t; /*! \brief type definition for the host interrupt handler \param pValue - pointer to any memory strcuture. The value of this pointer is given on registration of a new interrupt handler \note */ typedef void (*SL_P_EVENT_HANDLER)(void); #define P_EVENT_HANDLER SL_P_EVENT_HANDLER /*! \brief type definition for the host spawn function \param pValue - pointer to any memory strcuture. The value of this pointer is given on invoking the spawn function. \note */ typedef signed short (*P_OS_SPAWN_ENTRY)(void* pValue); typedef struct { P_OS_SPAWN_ENTRY pEntry; void* pValue; }tSimpleLinkSpawnMsg; /*! \brief open spi communication port to be used for communicating with a SimpleLink device Given an interface name and option flags, this function opens the spi communication port and creates a file descriptor. This file descriptor can be used afterwards to read and write data from and to this specific spi channel. The SPI speed, clock polarity, clock phase, chip select and all other attributes are all set to hardcoded values in this function. \param ifName - points to the interface name/path. The interface name is an optional attributes that the SimpleLink driver receives on opening the device. in systems that the spi channel is not implemented as part of the os device drivers, this parameter could be NULL. \param flags - option flags \return upon successful completion, the function shall open the spi channel and return a non-negative integer representing the file descriptor. Otherwise, -1 shall be returned \sa spi_Close , spi_Read , spi_Write \note \warning */ Fd_t spi_Open(char *ifName, unsigned long flags); /*! \brief closes an opened SPI communication port \param fd - file descriptor of an opened SPI channel \return upon successful completion, the function shall return 0. Otherwise, -1 shall be returned \sa spi_Open \note \warning */ int spi_Close(Fd_t fd); /*! \brief attempts to read up to len bytes from SPI channel into a buffer starting at pBuff. \param fd - file descriptor of an opened SPI channel \param pBuff - points to first location to start writing the data \param len - number of bytes to read from the SPI channel \return upon successful completion, the function shall return 0. Otherwise, -1 shall be returned \sa spi_Open , spi_Write \note \warning */ int spi_Read(Fd_t fd, unsigned char *pBuff, int len); /*! \brief attempts to write up to len bytes to the SPI channel \param fd - file descriptor of an opened SPI channel \param pBuff - points to first location to start getting the data from \param len - number of bytes to write to the SPI channel \return upon successful completion, the function shall return 0. Otherwise, -1 shall be returned \sa spi_Open , spi_Read \note This function could be implemented as zero copy and return only upon successful completion of writing the whole buffer, but in cases that memory allocation is not too tight, the function could copy the data to internal buffer, return back and complete the write in parallel to other activities as long as the other SPI activities would be blocked untill the entire buffer write would be completed \warning */ int spi_Write(Fd_t fd, unsigned char *pBuff, int len); /*! \brief register an interrupt handler for the host IRQ \param InterruptHdl - pointer to interrupt handler function \param pValue - pointer to a memory strcuture that is passed to the interrupt handler. \return upon successful registration, the function shall return 0. Otherwise, -1 shall be returned \sa \note If there is already registered interrupt handler, the function should overwrite the old handler with the new one \warning */ int NwpRegisterInterruptHandler(P_EVENT_HANDLER InterruptHdl , void* pValue); /*! \brief Masks host IRQ \sa NwpUnMaskInterrupt \warning */ void NwpMaskInterrupt(); /*! \brief Unmasks host IRQ \sa NwpMaskInterrupt \warning */ void NwpUnMaskInterrupt(); /*! \brief Preamble to the enabling the Network Processor. Placeholder to implement any pre-process operations before enabling networking operations. \sa sl_DeviceEnable \note belongs to \ref ported_sec */ void NwpPowerOnPreamble(void); /*! \brief Disable the Network Processor \sa sl_DeviceEnable \note belongs to \ref ported_sec */ void NwpPowerOff(void); /*! \brief Enable the Network Processor \sa sl_DeviceDisable \note belongs to \ref ported_sec */ void NwpPowerOn(void); #if defined(SL_PLATFORM_MULTI_THREADED) /*! \brief Time wait for a semaphore handle, using the driver porting layer of the core SDK. \param pSemHandle - pointer to a memory structure that would contain the handle. \param timeout - specify the time to wait for the signal \return The function shall return 0. \note belongs to \ref ported_sec */ int Semaphore_pend_handle(sem_t* pSemHandle, uint32_t timeout); /*! \brief Creates a mutex object handle, using the driver porting layer of the core SDK. \param pMutexHandle - pointer to a memory structure that would contain the handle. \return upon successful creation, the function shall return 0. Otherwise, -1 shall be returned \note belongs to \ref ported_sec */ int Mutex_create_handle(pthread_mutex_t* pMutexHandle); /*! \brief Deletes a mutex object handle, using the driver porting layer of the core SDK. \param pMutexHandle - pointer to a memory structure that would contain the handle. \return the function shall return 0. \note belongs to \ref ported_sec */ int MutexP_delete_handle(pthread_mutex_t* pMutexHandle); #else /*! \brief Creates a semaphore handle, using the driver porting layer of the core SDK. \param pSemHandle - pointer to a memory structure that would contain the handle. \return upon successful creation, the function shall return 0. Otherwise, -1 shall be returned \note belongs to \ref ported_sec */ int SemaphoreP_create_handle(SemaphoreP_Handle* pSemHandle); /*! \brief Deletes a semaphore handle, using the driver porting layer of the core SDK. \param pSemHandle - pointer to a memory structure that would contain the handle. \return The function shall return 0. \note belongs to \ref ported_sec */ int SemaphoreP_delete_handle(SemaphoreP_Handle* pSemHandle); /*! \brief Post (signal) a semaphore handle, using the driver porting layer of the core SDK. \param pSemHandle - pointer to a memory structure that would contain the handle. \return The function shall return 0. \note belongs to \ref ported_sec */ int SemaphoreP_post_handle(SemaphoreP_Handle* pSemHandle); /*! \brief Creates a mutex object handle, using the driver porting layer of the core SDK. \param pMutexHandle - pointer to a memory structure that would contain the handle. \return upon successful creation, the function shall return 0. Otherwise, -1 shall be returned \note belongs to \ref ported_sec */ int Mutex_create_handle(MutexP_Handle* pMutexHandle); /*! \brief Deletes a mutex object handle, using the driver porting layer of the core SDK. \param pMutexHandle - pointer to a memory structure that would contain the handle. \return the function shall return 0. \note belongs to \ref ported_sec */ int MutexP_delete_handle(MutexP_Handle* pMutexHandle); /*! \brief Unlocks a mutex object. \param pMutexHandle - pointer to a memory structure that contains the object. \return upon successful unlocking, the function shall return 0. \note belongs to \ref ported_sec */ int Mutex_unlock(MutexP_Handle pMutexHandle); /*! \brief Locks a mutex object. \param pMutexHandle - pointer to a memory structure that contains the object. \return upon successful locking, the function shall return 0. \note belongs to \ref ported_sec \warning The lock will block until the mutex is available. */ int Mutex_lock(MutexP_Handle pMutexHandle); #endif /*! \brief Take a time stamp value. \return 32-bit value of the systick counter. \sa \warning */ unsigned long TimerGetCurrentTimestamp(); /*! \brief \return \sa \warning */ void NwpWaitForShutDownInd(); #ifdef __cplusplus } #endif // __cplusplus #endif