/****************************************************************************** * Filename: aux_tdc.h * * Description: Defines and prototypes for the AUX Time-to-Digital Converter * * Copyright (c) 2015 - 2022, Texas Instruments Incorporated * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1) Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2) Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3) Neither the name of the ORGANIZATION nor the names of its contributors may * be used to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ******************************************************************************/ //***************************************************************************** // //! \addtogroup aux_group //! @{ //! \addtogroup auxtdc_api //! @{ // //***************************************************************************** #ifndef __AUX_TDC_H__ #define __AUX_TDC_H__ //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif #include #include #include "../inc/hw_types.h" #include "../inc/hw_memmap.h" #include "../inc/hw_ints.h" #include "../inc/hw_aux_tdc.h" #include "debug.h" //***************************************************************************** // // Support for DriverLib in ROM: // This section renames all functions that are not "static inline", so that // calling these functions will default to implementation in flash. At the end // of this file a second renaming will change the defaults to implementation in // ROM for available functions. // // To force use of the implementation in flash, e.g. for debugging: // - Globally: Define DRIVERLIB_NOROM at project level // - Per function: Use prefix "NOROM_" when calling the function // //***************************************************************************** #if !defined(DOXYGEN) #define AUXTDCConfigSet NOROM_AUXTDCConfigSet #define AUXTDCMeasurementDone NOROM_AUXTDCMeasurementDone #endif //***************************************************************************** // // Defines for the status of a AUX TDC measurement. // //***************************************************************************** #define AUX_TDC_BUSY 0x00000001 #define AUX_TDC_TIMEOUT 0x00000002 #define AUX_TDC_DONE 0x00000004 //***************************************************************************** // // Defines for the control of a AUX TDC. // //***************************************************************************** #define AUX_TDC_RUNSYNC 0x00000001 #define AUX_TDC_RUN 0x00000002 #define AUX_TDC_ABORT 0x00000003 //***************************************************************************** // // Defines for possible states of the TDC internal state machine. // //***************************************************************************** #define AUXTDC_WAIT_START (AUX_TDC_STAT_STATE_WAIT_START) #define AUXTDC_WAIT_START_CNTEN (AUX_TDC_STAT_STATE_WAIT_START_STOP_CNT_EN) #define AUXTDC_IDLE (AUX_TDC_STAT_STATE_IDLE) #define AUXTDC_CLRCNT (AUX_TDC_STAT_STATE_CLR_CNT) #define AUXTDC_WAIT_STOP (AUX_TDC_STAT_STATE_WAIT_STOP) #define AUXTDC_WAIT_STOP_CNTDOWN (AUX_TDC_STAT_STATE_WAIT_STOP_CNTDWN) #define AUXTDC_GETRESULTS (AUX_TDC_STAT_STATE_GET_RESULT) #define AUXTDC_POR (AUX_TDC_STAT_STATE_POR) #define AUXTDC_WAIT_CLRCNT_DONE (AUX_TDC_STAT_STATE_WAIT_CLR_CNT_DONE) #define AUXTDC_START_FALL (AUX_TDC_STAT_STATE_START_FALL) #define AUXTDC_FORCE_STOP (AUX_TDC_STAT_STATE_FORCE_STOP) //***************************************************************************** // // Defines for controlling the AUX TDC. Values can be passed to AUXTDCConfigSet(). // //***************************************************************************** #define AUXTDC_STOPPOL_RIS (AUX_TDC_TRIGSRC_STOP_POL_HIGH) // Rising edge polarity for stop event #define AUXTDC_STOPPOL_FALL (AUX_TDC_TRIGSRC_STOP_POL_LOW) // Falling edge polarity for stop event #define AUXTDC_STOP_AUXIO0 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO0) #define AUXTDC_STOP_AUXIO1 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO1) #define AUXTDC_STOP_AUXIO2 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO2) #define AUXTDC_STOP_AUXIO3 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO3) #define AUXTDC_STOP_AUXIO4 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO4) #define AUXTDC_STOP_AUXIO5 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO5) #define AUXTDC_STOP_AUXIO6 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO6) #define AUXTDC_STOP_AUXIO7 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO7) #define AUXTDC_STOP_AUXIO8 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO8) #define AUXTDC_STOP_AUXIO9 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO9) #define AUXTDC_STOP_AUXIO10 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO10) #define AUXTDC_STOP_AUXIO11 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO11) #define AUXTDC_STOP_AUXIO12 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO12) #define AUXTDC_STOP_AUXIO13 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO13) #define AUXTDC_STOP_AUXIO14 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO14) #define AUXTDC_STOP_AUXIO15 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO15) #define AUXTDC_STOP_AUXIO16 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO16) #define AUXTDC_STOP_AUXIO17 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO17) #define AUXTDC_STOP_AUXIO18 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO18) #define AUXTDC_STOP_AUXIO19 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO19) #define AUXTDC_STOP_AUXIO20 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO20) #define AUXTDC_STOP_AUXIO21 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO21) #define AUXTDC_STOP_AUXIO22 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO22) #define AUXTDC_STOP_AUXIO23 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO23) #define AUXTDC_STOP_AUXIO24 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO24) #define AUXTDC_STOP_AUXIO25 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO25) #define AUXTDC_STOP_AUXIO26 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO26) #define AUXTDC_STOP_AUXIO27 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO27) #define AUXTDC_STOP_AUXIO28 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO28) #define AUXTDC_STOP_AUXIO29 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO29) #define AUXTDC_STOP_AUXIO30 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO30) #define AUXTDC_STOP_AUXIO31 (AUX_TDC_TRIGSRC_STOP_SRC_AUXIO31) #define AUXTDC_STOP_MANUAL_EV (AUX_TDC_TRIGSRC_STOP_SRC_MANUAL_EV) #define AUXTDC_STOP_AON_RTC_CH2_DLY (AUX_TDC_TRIGSRC_STOP_SRC_AON_RTC_CH2_DLY) #define AUXTDC_STOP_AON_RTC_4KHZ (AUX_TDC_TRIGSRC_STOP_SRC_AON_RTC_4KHZ) #define AUXTDC_STOP_AON_BATMON_BAT_UPD (AUX_TDC_TRIGSRC_STOP_SRC_AON_BATMON_BAT_UPD) #define AUXTDC_STOP_AON_BATMON_TEMP_UPD (AUX_TDC_TRIGSRC_STOP_SRC_AON_BATMON_TEMP_UPD) #define AUXTDC_STOP_SCLK_LF (AUX_TDC_TRIGSRC_STOP_SRC_SCLK_LF) #define AUXTDC_STOP_PWR_DWN (AUX_TDC_TRIGSRC_STOP_SRC_PWR_DWN) #define AUXTDC_STOP_MCU_ACTIVE (AUX_TDC_TRIGSRC_STOP_SRC_MCU_ACTIVE) #define AUXTDC_STOP_VDDR_RECHARGE (AUX_TDC_TRIGSRC_STOP_SRC_VDDR_RECHARGE) #define AUXTDC_STOP_TIMER2_EV0 (AUX_TDC_TRIGSRC_STOP_SRC_AUX_TIMER2_EV0) #define AUXTDC_STOP_TIMER2_EV1 (AUX_TDC_TRIGSRC_STOP_SRC_AUX_TIMER2_EV1) #define AUXTDC_STOP_TIMER2_EV2 (AUX_TDC_TRIGSRC_STOP_SRC_AUX_TIMER2_EV2) #define AUXTDC_STOP_TIMER2_EV3 (AUX_TDC_TRIGSRC_STOP_SRC_AUX_TIMER2_EV3) #define AUXTDC_STOP_TIMER2_PULSE (AUX_TDC_TRIGSRC_STOP_SRC_AUX_TIMER2_PULSE) #define AUXTDC_STOP_TDC_DONE (AUX_TDC_TRIGSRC_STOP_SRC_AUX_TDC_DONE) #define AUXTDC_STOP_ADC_IRQ (AUX_TDC_TRIGSRC_STOP_SRC_AUX_ADC_IRQ) #define AUXTDC_STOP_ADC_FIFO_NOT_EMPTY (AUX_TDC_TRIGSRC_STOP_SRC_AUX_ADC_FIFO_NOT_EMPTY) #define AUXTDC_STOP_NO_EVENT (AUX_TDC_TRIGSRC_STOP_SRC_NO_EVENT) #define AUXTDC_STOP_ADC_DONE (AUX_TDC_TRIGSRC_STOP_SRC_AUX_ADC_DONE) #define AUXTDC_STOP_ADC_FIFO_ALMOST_FULL (AUX_TDC_TRIGSRC_STOP_SRC_AUX_ADC_FIFO_ALMOST_FULL) #define AUXTDC_STOP_ISRC_RESET (AUX_TDC_TRIGSRC_STOP_SRC_AUX_ISRC_RESET_N) #define AUXTDC_STOP_OBSMUX0 (AUX_TDC_TRIGSRC_STOP_SRC_MCU_OBSMUX0) #define AUXTDC_STOP_OBSMUX1 (AUX_TDC_TRIGSRC_STOP_SRC_MCU_OBSMUX1) #define AUXTDC_STOP_SMPH_AUTOTAKE_DONE (AUX_TDC_TRIGSRC_STOP_SRC_AUX_SMPH_AUTOTAKE_DONE) #define AUXTDC_STOP_TDC_PRE (AUX_TDC_TRIGSRC_STOP_SRC_AUX_TDC_PRE) #define AUXTDC_STOP_TIMER0_EV (AUX_TDC_TRIGSRC_STOP_SRC_AUX_TIMER0_EV) #define AUXTDC_STOP_TIMER1_EV (AUX_TDC_TRIGSRC_STOP_SRC_AUX_TIMER1_EV) #define AUXTDC_STOP_AON_RTC_CH2 (AUX_TDC_TRIGSRC_STOP_SRC_AON_RTC_CH2) #define AUXTDC_STOP_AUX_COMPA (AUX_TDC_TRIGSRC_STOP_SRC_AUX_COMPA) #define AUXTDC_STOP_AUX_COMPB (AUX_TDC_TRIGSRC_STOP_SRC_AUX_COMPB) #define AUXTDC_STOP_ACLK_REF (AUX_TDC_TRIGSRC_STOP_SRC_ACLK_REF) #define AUXTDC_STOP_MCU_EV (AUX_TDC_TRIGSRC_STOP_SRC_MCU_EV) #define AUXTDC_STARTPOL_RIS (AUX_TDC_TRIGSRC_START_POL_HIGH) // Rising edge polarity for start event #define AUXTDC_STARTPOL_FALL (AUX_TDC_TRIGSRC_START_POL_LOW) // Falling edge polarity for start event #define AUXTDC_START_AUXIO0 (AUX_TDC_TRIGSRC_START_SRC_AUXIO0) #define AUXTDC_START_AUXIO1 (AUX_TDC_TRIGSRC_START_SRC_AUXIO1) #define AUXTDC_START_AUXIO2 (AUX_TDC_TRIGSRC_START_SRC_AUXIO2) #define AUXTDC_START_AUXIO3 (AUX_TDC_TRIGSRC_START_SRC_AUXIO3) #define AUXTDC_START_AUXIO4 (AUX_TDC_TRIGSRC_START_SRC_AUXIO4) #define AUXTDC_START_AUXIO5 (AUX_TDC_TRIGSRC_START_SRC_AUXIO5) #define AUXTDC_START_AUXIO6 (AUX_TDC_TRIGSRC_START_SRC_AUXIO6) #define AUXTDC_START_AUXIO7 (AUX_TDC_TRIGSRC_START_SRC_AUXIO7) #define AUXTDC_START_AUXIO8 (AUX_TDC_TRIGSRC_START_SRC_AUXIO8) #define AUXTDC_START_AUXIO9 (AUX_TDC_TRIGSRC_START_SRC_AUXIO9) #define AUXTDC_START_AUXIO10 (AUX_TDC_TRIGSRC_START_SRC_AUXIO10) #define AUXTDC_START_AUXIO11 (AUX_TDC_TRIGSRC_START_SRC_AUXIO11) #define AUXTDC_START_AUXIO12 (AUX_TDC_TRIGSRC_START_SRC_AUXIO12) #define AUXTDC_START_AUXIO13 (AUX_TDC_TRIGSRC_START_SRC_AUXIO13) #define AUXTDC_START_AUXIO14 (AUX_TDC_TRIGSRC_START_SRC_AUXIO14) #define AUXTDC_START_AUXIO15 (AUX_TDC_TRIGSRC_START_SRC_AUXIO15) #define AUXTDC_START_AUXIO16 (AUX_TDC_TRIGSRC_START_SRC_AUXIO16) #define AUXTDC_START_AUXIO17 (AUX_TDC_TRIGSRC_START_SRC_AUXIO17) #define AUXTDC_START_AUXIO18 (AUX_TDC_TRIGSRC_START_SRC_AUXIO18) #define AUXTDC_START_AUXIO19 (AUX_TDC_TRIGSRC_START_SRC_AUXIO19) #define AUXTDC_START_AUXIO20 (AUX_TDC_TRIGSRC_START_SRC_AUXIO20) #define AUXTDC_START_AUXIO21 (AUX_TDC_TRIGSRC_START_SRC_AUXIO21) #define AUXTDC_START_AUXIO22 (AUX_TDC_TRIGSRC_START_SRC_AUXIO22) #define AUXTDC_START_AUXIO23 (AUX_TDC_TRIGSRC_START_SRC_AUXIO23) #define AUXTDC_START_AUXIO24 (AUX_TDC_TRIGSRC_START_SRC_AUXIO24) #define AUXTDC_START_AUXIO25 (AUX_TDC_TRIGSRC_START_SRC_AUXIO25) #define AUXTDC_START_AUXIO26 (AUX_TDC_TRIGSRC_START_SRC_AUXIO26) #define AUXTDC_START_AUXIO27 (AUX_TDC_TRIGSRC_START_SRC_AUXIO27) #define AUXTDC_START_AUXIO28 (AUX_TDC_TRIGSRC_START_SRC_AUXIO28) #define AUXTDC_START_AUXIO29 (AUX_TDC_TRIGSRC_START_SRC_AUXIO29) #define AUXTDC_START_AUXIO30 (AUX_TDC_TRIGSRC_START_SRC_AUXIO30) #define AUXTDC_START_AUXIO31 (AUX_TDC_TRIGSRC_START_SRC_AUXIO31) #define AUXTDC_START_MANUAL_EV (AUX_TDC_TRIGSRC_START_SRC_MANUAL_EV) #define AUXTDC_START_AON_RTC_CH2_DLY (AUX_TDC_TRIGSRC_START_SRC_AON_RTC_CH2_DLY) #define AUXTDC_START_AON_RTC_4KHZ (AUX_TDC_TRIGSRC_START_SRC_AON_RTC_4KHZ) #define AUXTDC_START_AON_BATMON_BAT_UPD (AUX_TDC_TRIGSRC_START_SRC_AON_BATMON_BAT_UPD) #define AUXTDC_START_AON_BATMON_TEMP_UPD (AUX_TDC_TRIGSRC_START_SRC_AON_BATMON_TEMP_UPD) #define AUXTDC_START_SCLK_LF (AUX_TDC_TRIGSRC_START_SRC_SCLK_LF) #define AUXTDC_START_PWR_DWN (AUX_TDC_TRIGSRC_START_SRC_PWR_DWN) #define AUXTDC_START_MCU_ACTIVE (AUX_TDC_TRIGSRC_START_SRC_MCU_ACTIVE) #define AUXTDC_START_VDDR_RECHARGE (AUX_TDC_TRIGSRC_START_SRC_VDDR_RECHARGE) #define AUXTDC_START_TIMER2_EV0 (AUX_TDC_TRIGSRC_START_SRC_AUX_TIMER2_EV0) #define AUXTDC_START_TIMER2_EV1 (AUX_TDC_TRIGSRC_START_SRC_AUX_TIMER2_EV1) #define AUXTDC_START_TIMER2_EV2 (AUX_TDC_TRIGSRC_START_SRC_AUX_TIMER2_EV2) #define AUXTDC_START_TIMER2_EV3 (AUX_TDC_TRIGSRC_START_SRC_AUX_TIMER2_EV3) #define AUXTDC_START_TIMER2_PULSE (AUX_TDC_TRIGSRC_START_SRC_AUX_TIMER2_PULSE) #define AUXTDC_START_TDC_DONE (AUX_TDC_TRIGSRC_START_SRC_AUX_TDC_DONE) #define AUXTDC_START_ADC_IRQ (AUX_TDC_TRIGSRC_START_SRC_AUX_ADC_IRQ) #define AUXTDC_START_ADC_FIFO_NOT_EMPTY (AUX_TDC_TRIGSRC_START_SRC_AUX_ADC_FIFO_NOT_EMPTY) #define AUXTDC_START_NO_EVENT (AUX_TDC_TRIGSRC_START_SRC_NO_EVENT) #define AUXTDC_START_ADC_DONE (AUX_TDC_TRIGSRC_START_SRC_AUX_ADC_DONE) #define AUXTDC_START_ADC_FIFO_ALMOST_FULL (AUX_TDC_TRIGSRC_START_SRC_AUX_ADC_FIFO_ALMOST_FULL) #define AUXTDC_START_ISRC_RESET (AUX_TDC_TRIGSRC_START_SRC_AUX_ISRC_RESET_N) #define AUXTDC_START_OBSMUX0 (AUX_TDC_TRIGSRC_START_SRC_MCU_OBSMUX0) #define AUXTDC_START_OBSMUX1 (AUX_TDC_TRIGSRC_START_SRC_MCU_OBSMUX1) #define AUXTDC_START_SMPH_AUTOTAKE_DONE (AUX_TDC_TRIGSRC_START_SRC_AUX_SMPH_AUTOTAKE_DONE) #define AUXTDC_START_TDC_PRE (AUX_TDC_TRIGSRC_START_SRC_AUX_TDC_PRE) #define AUXTDC_START_TIMER0_EV (AUX_TDC_TRIGSRC_START_SRC_AUX_TIMER0_EV) #define AUXTDC_START_TIMER1_EV (AUX_TDC_TRIGSRC_START_SRC_AUX_TIMER1_EV) #define AUXTDC_START_AON_RTC_CH2 (AUX_TDC_TRIGSRC_START_SRC_AON_RTC_CH2) #define AUXTDC_START_AUX_COMPA (AUX_TDC_TRIGSRC_START_SRC_AUX_COMPA) #define AUXTDC_START_AUX_COMPB (AUX_TDC_TRIGSRC_START_SRC_AUX_COMPB) #define AUXTDC_START_ACLK_REF (AUX_TDC_TRIGSRC_START_SRC_ACLK_REF) #define AUXTDC_START_MCU_EV (AUX_TDC_TRIGSRC_START_SRC_MCU_EV) //***************************************************************************** // // Defines for the possible saturation values set using AUXTDCLimitSet(). // //***************************************************************************** #define AUXTDC_SAT_4096 (AUX_TDC_SATCFG_LIMIT_R12) #define AUXTDC_SAT_8192 (AUX_TDC_SATCFG_LIMIT_R13) #define AUXTDC_SAT_16384 (AUX_TDC_SATCFG_LIMIT_R14) #define AUXTDC_SAT_32768 (AUX_TDC_SATCFG_LIMIT_R15) #define AUXTDC_SAT_65536 (AUX_TDC_SATCFG_LIMIT_R16) #define AUXTDC_SAT_131072 (AUX_TDC_SATCFG_LIMIT_R17) #define AUXTDC_SAT_262144 (AUX_TDC_SATCFG_LIMIT_R18) #define AUXTDC_SAT_524288 (AUX_TDC_SATCFG_LIMIT_R19) #define AUXTDC_SAT_1048576 (AUX_TDC_SATCFG_LIMIT_R20) #define AUXTDC_SAT_2097152 (AUX_TDC_SATCFG_LIMIT_R21) #define AUXTDC_SAT_4194304 (AUX_TDC_SATCFG_LIMIT_R22) #define AUXTDC_SAT_8388608 (AUX_TDC_SATCFG_LIMIT_R23) #define AUXTDC_SAT_16777216 (AUX_TDC_SATCFG_LIMIT_R24) #define AUXTDC_NUM_SAT_VALS 16 //***************************************************************************** // // API Functions and prototypes // //***************************************************************************** #ifdef DRIVERLIB_DEBUG //***************************************************************************** // //! \internal //! \brief Checks an AUX TDC base address. //! //! This function determines if a AUX TDC port base address is valid. //! //! \param ui32Base is the base address of the AUX TDC port. //! //! \return Returns \c true if the base address is valid and \c false //! otherwise. // //***************************************************************************** static bool AUXTDCBaseValid(uint32_t ui32Base) { return(ui32Base == AUX_TDC_BASE); } #endif //***************************************************************************** // //! \brief Get the status of the AUX TDC internal state machine. //! //! This function will return the current state of the AUX TDC internal state //! machine. //! \param ui32Base is base address of the AUX TDC //! //! \return Returns the current state of the state machine. //! Possible states for the state machine are: //! - \ref AUXTDC_WAIT_START //! - \ref AUXTDC_WAIT_START_CNTEN //! - \ref AUXTDC_IDLE //! - \ref AUXTDC_CLRCNT //! - \ref AUXTDC_WAIT_STOP //! - \ref AUXTDC_WAIT_STOP_CNTDOWN //! - \ref AUXTDC_GETRESULTS //! - \ref AUXTDC_POR //! - \ref AUXTDC_WAIT_CLRCNT_DONE //! - \ref AUXTDC_START_FALL //! - \ref AUXTDC_FORCE_STOP. // //***************************************************************************** __STATIC_INLINE uint32_t AUXTDCStatusGet(uint32_t ui32Base) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); // Return the status value for the correct ADI Slave. return((HWREG(ui32Base + AUX_TDC_O_STAT) & AUX_TDC_STAT_STATE_M) >> AUX_TDC_STAT_STATE_S); } //***************************************************************************** // //! \brief Configure the operation of the AUX TDC. //! //! Use this function to configure the start and stop event for the AUX TDC. //! //! The \c ui32StartCondition must be a bitwise OR of the start event and the //! polarity of the start event. The start events are: //! - \ref AUXTDC_START_AUXIO0 //! - \ref AUXTDC_START_AUXIO1 //! - \ref AUXTDC_START_AUXIO2 //! - \ref AUXTDC_START_AUXIO3 //! - \ref AUXTDC_START_AUXIO4 //! - \ref AUXTDC_START_AUXIO5 //! - \ref AUXTDC_START_AUXIO6 //! - \ref AUXTDC_START_AUXIO7 //! - \ref AUXTDC_START_AUXIO8 //! - \ref AUXTDC_START_AUXIO9 //! - \ref AUXTDC_START_AUXIO10 //! - \ref AUXTDC_START_AUXIO11 //! - \ref AUXTDC_START_AUXIO12 //! - \ref AUXTDC_START_AUXIO13 //! - \ref AUXTDC_START_AUXIO14 //! - \ref AUXTDC_START_AUXIO15 //! - \ref AUXTDC_START_AUXIO16 //! - \ref AUXTDC_START_AUXIO17 //! - \ref AUXTDC_START_AUXIO18 //! - \ref AUXTDC_START_AUXIO19 //! - \ref AUXTDC_START_AUXIO20 //! - \ref AUXTDC_START_AUXIO21 //! - \ref AUXTDC_START_AUXIO22 //! - \ref AUXTDC_START_AUXIO23 //! - \ref AUXTDC_START_AUXIO24 //! - \ref AUXTDC_START_AUXIO25 //! - \ref AUXTDC_START_AUXIO26 //! - \ref AUXTDC_START_AUXIO27 //! - \ref AUXTDC_START_AUXIO28 //! - \ref AUXTDC_START_AUXIO29 //! - \ref AUXTDC_START_AUXIO30 //! - \ref AUXTDC_START_AUXIO31 //! - \ref AUXTDC_START_MANUAL_EV //! - \ref AUXTDC_START_AON_RTC_CH2_DLY //! - \ref AUXTDC_START_AON_RTC_4KHZ //! - \ref AUXTDC_START_AON_BATMON_BAT_UPD //! - \ref AUXTDC_START_AON_BATMON_TEMP_UPD //! - \ref AUXTDC_START_SCLK_LF //! - \ref AUXTDC_START_PWR_DWN //! - \ref AUXTDC_START_MCU_ACTIVE //! - \ref AUXTDC_START_VDDR_RECHARGE //! - \ref AUXTDC_START_TIMER2_EV0 //! - \ref AUXTDC_START_TIMER2_EV1 //! - \ref AUXTDC_START_TIMER2_EV2 //! - \ref AUXTDC_START_TIMER2_EV3 //! - \ref AUXTDC_START_TIMER2_PULSE //! - \ref AUXTDC_START_TDC_DONE //! - \ref AUXTDC_START_ADC_IRQ //! - \ref AUXTDC_START_ADC_FIFO_NOT_EMPTY //! - \ref AUXTDC_START_NO_EVENT //! - \ref AUXTDC_START_ADC_DONE //! - \ref AUXTDC_START_ADC_FIFO_ALMOST_FULL //! - \ref AUXTDC_START_ISRC_RESET //! - \ref AUXTDC_START_OBSMUX0 //! - \ref AUXTDC_START_OBSMUX1 //! - \ref AUXTDC_START_SMPH_AUTOTAKE_DONE //! - \ref AUXTDC_START_TDC_PRE //! - \ref AUXTDC_START_TIMER0_EV //! - \ref AUXTDC_START_TIMER1_EV //! - \ref AUXTDC_START_AON_RTC_CH2 //! - \ref AUXTDC_START_AUX_COMPA //! - \ref AUXTDC_START_AUX_COMPB //! - \ref AUXTDC_START_ACLK_REF //! - \ref AUXTDC_START_MCU_EV //! //! The polarity of the start event is either rising \ref AUXTDC_STARTPOL_RIS //! or falling \ref AUXTDC_STARTPOL_FALL. //! //! The \c ui32StopCondition must be a bitwise OR of the stop event and the //! polarity of the stop event. The stop events are: //! - \ref AUXTDC_STOP_AUXIO0 //! - \ref AUXTDC_STOP_AUXIO1 //! - \ref AUXTDC_STOP_AUXIO2 //! - \ref AUXTDC_STOP_AUXIO3 //! - \ref AUXTDC_STOP_AUXIO4 //! - \ref AUXTDC_STOP_AUXIO5 //! - \ref AUXTDC_STOP_AUXIO6 //! - \ref AUXTDC_STOP_AUXIO7 //! - \ref AUXTDC_STOP_AUXIO8 //! - \ref AUXTDC_STOP_AUXIO9 //! - \ref AUXTDC_STOP_AUXIO10 //! - \ref AUXTDC_STOP_AUXIO11 //! - \ref AUXTDC_STOP_AUXIO12 //! - \ref AUXTDC_STOP_AUXIO13 //! - \ref AUXTDC_STOP_AUXIO14 //! - \ref AUXTDC_STOP_AUXIO15 //! - \ref AUXTDC_STOP_AUXIO16 //! - \ref AUXTDC_STOP_AUXIO17 //! - \ref AUXTDC_STOP_AUXIO18 //! - \ref AUXTDC_STOP_AUXIO19 //! - \ref AUXTDC_STOP_AUXIO20 //! - \ref AUXTDC_STOP_AUXIO21 //! - \ref AUXTDC_STOP_AUXIO22 //! - \ref AUXTDC_STOP_AUXIO23 //! - \ref AUXTDC_STOP_AUXIO24 //! - \ref AUXTDC_STOP_AUXIO25 //! - \ref AUXTDC_STOP_AUXIO26 //! - \ref AUXTDC_STOP_AUXIO27 //! - \ref AUXTDC_STOP_AUXIO28 //! - \ref AUXTDC_STOP_AUXIO29 //! - \ref AUXTDC_STOP_AUXIO30 //! - \ref AUXTDC_STOP_AUXIO31 //! - \ref AUXTDC_STOP_MANUAL_EV //! - \ref AUXTDC_STOP_AON_RTC_CH2_DLY //! - \ref AUXTDC_STOP_AON_RTC_4KHZ //! - \ref AUXTDC_STOP_AON_BATMON_BAT_UPD //! - \ref AUXTDC_STOP_AON_BATMON_TEMP_UPD //! - \ref AUXTDC_STOP_SCLK_LF //! - \ref AUXTDC_STOP_PWR_DWN //! - \ref AUXTDC_STOP_MCU_ACTIVE //! - \ref AUXTDC_STOP_VDDR_RECHARGE //! - \ref AUXTDC_STOP_TIMER2_EV0 //! - \ref AUXTDC_STOP_TIMER2_EV1 //! - \ref AUXTDC_STOP_TIMER2_EV2 //! - \ref AUXTDC_STOP_TIMER2_EV3 //! - \ref AUXTDC_STOP_TIMER2_PULSE //! - \ref AUXTDC_STOP_TDC_DONE //! - \ref AUXTDC_STOP_ADC_IRQ //! - \ref AUXTDC_STOP_ADC_FIFO_NOT_EMPTY //! - \ref AUXTDC_STOP_NO_EVENT //! - \ref AUXTDC_STOP_ADC_DONE //! - \ref AUXTDC_STOP_ADC_FIFO_ALMOST_FULL //! - \ref AUXTDC_STOP_ISRC_RESET //! - \ref AUXTDC_STOP_OBSMUX0 //! - \ref AUXTDC_STOP_OBSMUX1 //! - \ref AUXTDC_STOP_SMPH_AUTOTAKE_DONE //! - \ref AUXTDC_STOP_TDC_PRE //! - \ref AUXTDC_STOP_TIMER0_EV //! - \ref AUXTDC_STOP_TIMER1_EV //! - \ref AUXTDC_STOP_AON_RTC_CH2 //! - \ref AUXTDC_STOP_AUX_COMPA //! - \ref AUXTDC_STOP_AUX_COMPB //! - \ref AUXTDC_STOP_ACLK_REF //! - \ref AUXTDC_STOP_MCU_EV //! //! The polarity of the stop event is either rising \ref AUXTDC_STOPPOL_RIS //! or falling \ref AUXTDC_STOPPOL_FALL. //! //! \note The AUX TDC should only be configured when the AUX TDC is in the Idle //! state. To ensure that software does not lock up, it is recommended to //! ensure that the AUX TDC is actually in idle when calling \ref AUXTDCConfigSet(). //! This can be tested using \ref AUXTDCIdle(). //! //! \param ui32Base is base address of the AUX TDC. //! \param ui32StartCondition is AUX TDC a bitwise OR of a start event and polarity. //! \param ui32StopCondition is AUX TDC a bitwise OR of a stop event and polarity. //! //! \return None //! //! \sa \ref AUXTDCConfigSet(), \ref AUXTDCIdle() // //***************************************************************************** extern void AUXTDCConfigSet(uint32_t ui32Base, uint32_t ui32StartCondition, uint32_t ui32StopCondition); //***************************************************************************** // //! \brief Check if the AUX TDC is in idle mode. //! //! This function can be used to check whether the AUX TDC internal state //! machine is in idle mode. This is required before setting the polarity //! of the start and stop event. //! //! \param ui32Base is the base address of the AUX TDC. //! //! \return Returns \c true if state machine is in idle and returns \c false //! if the state machine is in any other state. // //***************************************************************************** __STATIC_INLINE bool AUXTDCIdle(uint32_t ui32Base) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); // Check if the AUX TDC is in the Idle state. return (((HWREG(ui32Base + AUX_TDC_O_STAT) & AUX_TDC_STAT_STATE_M) == AUX_TDC_STAT_STATE_IDLE) ? true : false); } //***************************************************************************** // //! \brief Enable the AUX TDC for a measurement. //! //! This function is used for arming the AUX TDC to begin a measurement as //! soon as the start condition is met. There are two run modes: //! - \ref AUX_TDC_RUNSYNC will wait for a falling event of the start pulse before //! starting measurement on next rising edge of start. This guarantees an edge //! triggered start and is recommended for frequency measurements. If the //! first falling edge is close to the start command it may be missed, but //! the TDC shall catch later falling edges and in any case guarantee a //! measurement start synchronous to the rising edge of the start event. //! - The \ref AUX_TDC_RUN is asynchronous start and asynchronous stop mode. Using //! this a TDC measurement may start immediately if start is high and hence it //! may not give precise edge to edge measurements. This mode is only //! recommended when start pulse is guaranteed to arrive at least 7 clock //! periods after command. //! //! \note The AUX TDC should be configured and in Idle mode before calling this //! function. //! //! \param ui32Base is the base address of the AUX TDC. //! \param ui32RunMode is the run mode for the AUX TDC. //! - \ref AUX_TDC_RUNSYNC : Synchronous run mode. //! - \ref AUX_TDC_RUN : Asynchronous run mode. //! //! \return None // //***************************************************************************** __STATIC_INLINE void AUXTDCEnable(uint32_t ui32Base, uint32_t ui32RunMode) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); ASSERT((ui32RunMode == AUX_TDC_RUN) || (ui32RunMode == AUX_TDC_RUNSYNC)); // Enable the AUX TDC. HWREG(ui32Base + AUX_TDC_O_CTL) = ui32RunMode; } //***************************************************************************** // //! \brief Force the AUX TDC back to Idle mode. //! //! This function will force the AUX TDC in Idle mode. The internal state //! machine will not go directly to Idle mode, so it is left to the programmer to //! ensure that the state machine is in Idle mode before doing any new //! configuration. This can be checked using \ref AUXTDCIdle(). //! //! \param ui32Base is the base address of the AUX TDC. //! //! \return None //! //! \sa \ref AUXTDCIdle() // //***************************************************************************** __STATIC_INLINE void AUXTDCIdleForce(uint32_t ui32Base) { // Check the arguments ASSERT(AUXTDCBaseValid(ui32Base)); // Abort operation of AUX TDC and force into Idle mode. HWREG(ui32Base + AUX_TDC_O_CTL) = AUX_TDC_CTL_CMD_ABORT; } //***************************************************************************** // //! \brief Check if the AUX TDC is done measuring. //! //! This function can be used to check whether the AUX TDC has finished a //! measurement. The AUX TDC may have completed a measurement for two reasons. //! Either it finish successfully \ref AUX_TDC_DONE or it failed due to a timeout //! \ref AUX_TDC_TIMEOUT. If the AUX TDC is still measuring it this function //! will return \ref AUX_TDC_BUSY. //! //! \param ui32Base is the base address of the AUX TDC. //! //! \return Returns the current status of a measurement: //! - \ref AUX_TDC_DONE : An AUX TDC measurement finished successfully. //! - \ref AUX_TDC_TIMEOUT : An AUX TDC measurement failed due to timeout. //! - \ref AUX_TDC_BUSY : An AUX TDC measurement is being performed. // //***************************************************************************** extern uint32_t AUXTDCMeasurementDone(uint32_t ui32Base); //***************************************************************************** // //! \brief Get the value of the latest measurement. //! //! This function is used for retrieving the value of the latest measurement //! performed by the AUX TDC. //! //! \param ui32Base is the base address of the AUX TDC. //! //! \return Returns the result of the latest measurement. // //***************************************************************************** __STATIC_INLINE uint32_t AUXTDCMeasurementGet(uint32_t ui32Base) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); // Return the measurement. return (HWREG(ui32Base + AUX_TDC_O_RESULT)); } //***************************************************************************** // //! \brief Set the saturation limit of the measurement. //! //! This function is used to set a saturation limit for the event accumulation //! register. The saturation limit is defined as a bit width of the //! accumulation register and therefore increases in power of 2. //! //! \param ui32Base is base address of the AUX TDC. //! \param ui32Limit is the saturation limit. //! - \ref AUXTDC_SAT_4096 //! - \ref AUXTDC_SAT_8192 //! - \ref AUXTDC_SAT_16384 //! - \ref AUXTDC_SAT_32768 //! - \ref AUXTDC_SAT_65536 //! - \ref AUXTDC_SAT_131072 //! - \ref AUXTDC_SAT_262144 //! - \ref AUXTDC_SAT_524288 //! - \ref AUXTDC_SAT_1048576 //! - \ref AUXTDC_SAT_2097152 //! - \ref AUXTDC_SAT_4194304 //! - \ref AUXTDC_SAT_8388608 //! - \ref AUXTDC_SAT_16777216 (default) //! //! \return None //! //! \note The actual value of the accumulation register might increase slightly beyond //! the saturation value before the saturation takes effect. //! //! \sa \ref AUXTDCLimitGet() // //***************************************************************************** __STATIC_INLINE void AUXTDCLimitSet(uint32_t ui32Base, uint32_t ui32Limit) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); ASSERT(ui32Limit < AUXTDC_NUM_SAT_VALS); // Set the saturation limit. HWREG(ui32Base + AUX_TDC_O_SATCFG) = ui32Limit; } //***************************************************************************** // //! \brief Get the saturation limit of the measurement. //! //! This function is used to retrieve the current saturation for the //! accumulator register. //! //! \param ui32Base is base address of the AUX TDC. //! //! \return Returns the saturation limit. //! - \ref AUXTDC_SAT_4096 //! - \ref AUXTDC_SAT_8192 //! - \ref AUXTDC_SAT_16384 //! - \ref AUXTDC_SAT_32768 //! - \ref AUXTDC_SAT_65536 //! - \ref AUXTDC_SAT_131072 //! - \ref AUXTDC_SAT_262144 //! - \ref AUXTDC_SAT_524288 //! - \ref AUXTDC_SAT_1048576 //! - \ref AUXTDC_SAT_2097152 //! - \ref AUXTDC_SAT_4194304 //! - \ref AUXTDC_SAT_8388608 //! - \ref AUXTDC_SAT_16777216 //! //! \sa \ref AUXTDCLimitSet() // //***************************************************************************** __STATIC_INLINE uint32_t AUXTDCLimitGet(uint32_t ui32Base) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); // Return the saturation limit. return (HWREG(ui32Base + AUX_TDC_O_SATCFG)); } //***************************************************************************** // //! \brief Enables the counter if possible. //! //! This function can be used to enable the AUX TDC stop/compare event counter. //! The counter can be used to measure multiple periods of a clock signal. //! For each stop/compare event the counter will be decremented by one and //! the measurement will continue running until the value of the counter //! reaches 0. The current value of the counter can be read using //! \ref AUXTDCCounterGet(). The reset value of the counter can be set using //! \ref AUXTDCCounterSet(). //! //! \param ui32Base is base address of the AUX TDC. //! //! \return Returns \c true if the counter was successfully enabled. If the //! AUX TDC is not in Idle mode, the counter can not be enabled, and the //! return value will be \c false. //! //! \sa \ref AUXTDCCounterGet(), \ref AUXTDCCounterSet() // //***************************************************************************** __STATIC_INLINE bool AUXTDCCounterEnable(uint32_t ui32Base) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); // Check if the AUX TDC is in idle mode. If not in Idle mode, the counter // will not be enabled. if(!((HWREG(ui32Base + AUX_TDC_O_STAT) & AUX_TDC_STAT_STATE_M) == AUX_TDC_STAT_STATE_IDLE)) { return false; } // Enable the counter. HWREG(ui32Base + AUX_TDC_O_TRIGCNTCFG) = AUX_TDC_TRIGCNTCFG_EN; // Counter successfully enabled. return true; } //***************************************************************************** // //! \brief Disables the counter if possible. //! //! This function can be used to disable the AUX TDC stop/compare event counter. //! //! \param ui32Base is base address of the AUX TDC. //! //! \return Returns \c true if the counter was successfully disabled. If the //! AUX TDC is not in Idle mode, the counter can not be disabled, and the //! return value will be \c false. //! //! \sa \ref AUXTDCCounterEnable() for more information on how to use the counter. // //***************************************************************************** __STATIC_INLINE bool AUXTDCCounterDisable(uint32_t ui32Base) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); // Check if the AUX TDC is in Idle mode. If not in Idle mode, the counter // will not be disabled. if(!((HWREG(ui32Base + AUX_TDC_O_STAT) & AUX_TDC_STAT_STATE_M) == AUX_TDC_STAT_STATE_IDLE)) { return false; } // Disable the counter. HWREG(ui32Base + AUX_TDC_O_TRIGCNTCFG) = 0; // Counter successfully disabled. return true; } //***************************************************************************** // //! \brief Set the reset number of counter compare/stop event to ignore before taking //! a measurement. //! //! This function loads the reset value of the counter with the specified //! number of events to ignore. A reset in this context means the counter //! has been disabled and then enabled. //! //! \param ui32Base is base address of the AUX TDC. //! \param ui32Events is the number of compare/stop events to load into the //! counter. //! //! \return Returns \c true if the counter was successfully updated. If the //! AUX TDC is not in Idle mode, the counter can not be updated, and the //! return value will be \c false. //! //! \sa \ref AUXTDCCounterEnable() // //***************************************************************************** __STATIC_INLINE bool AUXTDCCounterSet(uint32_t ui32Base, uint32_t ui32Events) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); // Check if the AUX TDC is in idle mode. If not in idle mode, the counter // will not be disabled. if(!((HWREG(ui32Base + AUX_TDC_O_STAT) & AUX_TDC_STAT_STATE_M) == AUX_TDC_STAT_STATE_IDLE)) { return false; } // Update the reset counter value. HWREG(ui32Base + AUX_TDC_O_TRIGCNTLOAD) = ui32Events; // Counter successfully updated. return true; } //***************************************************************************** // //! \brief Get the current number of counter compare/stop event to ignore before //! taking a measurement. //! //! This function returns the current value of compare/stop events before //! a measurement is registered. This value is decremented by one for each //! registered compare/stop event and will always be less than or equal the //! reset value of the counter set using \ref AUXTDCCounterSet(). //! //! \param ui32Base is base address of the AUX TDC. //! //! \return Returns the current value of compare/stop events ignored before a //! measurement is performed. //! //! \sa \ref AUXTDCCounterEnable(). // //***************************************************************************** __STATIC_INLINE uint32_t AUXTDCCounterGet(uint32_t ui32Base) { // Check the arguments. ASSERT(AUXTDCBaseValid(ui32Base)); // Return the current counter value. return (HWREG(ui32Base + AUX_TDC_O_TRIGCNT)); } //***************************************************************************** // // Support for DriverLib in ROM: // Redirect to implementation in ROM when available. // //***************************************************************************** #if !defined(DRIVERLIB_NOROM) && !defined(DOXYGEN) #include "../driverlib/rom.h" #ifdef ROM_AUXTDCConfigSet #undef AUXTDCConfigSet #define AUXTDCConfigSet ROM_AUXTDCConfigSet #endif #ifdef ROM_AUXTDCMeasurementDone #undef AUXTDCMeasurementDone #define AUXTDCMeasurementDone ROM_AUXTDCMeasurementDone #endif #endif //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif #endif // __AUX_TDC_H__ //***************************************************************************** // //! Close the Doxygen group. //! @} //! @} // //*****************************************************************************