/******************************************************************************
 * Copyright (c) 2022 Telink Semiconductor (Shanghai) Co., Ltd. ("TELINK")
 * All rights reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 *****************************************************************************/

/********************************************************************************************************
 * @file	soc.h
 *
 * @brief	This is the header file for B91
 *
 * @author	Driver Group
 *
 *******************************************************************************************************/
#pragma once

#include "../sys.h"

#define LM_BASE                        0x80000000

#define ILM_BASE                       (LM_BASE + 0x40000000)
#define DLM_BASE                       (LM_BASE + 0x40200000)
#define CPU_ILM_BASE                   (0x00000000)
#define CPU_DLM_BASE                   (0x00080000)

#define   SC_BASE_ADDR			        0x1401c0
/*******************************      reset registers: 1401e0      ******************************/
#define reg_rst						REG_ADDR32(0x1401e0)

#define reg_rst0					REG_ADDR8(0x1401e0)
enum{
	FLD_RST0_HSPI 			= 	BIT(0),
	FLD_RST0_I2C 			= 	BIT(1),
	FLD_RST0_UART0 			= 	BIT(2),
	FLD_RST0_USB 			= 	BIT(3),
	FLD_RST0_PWM 			= 	BIT(4),
	//RSVD
	FLD_RST0_UART1 			= 	BIT(6),
	FLD_RST0_SWIRE 			= 	BIT(7),
};


#define reg_rst1					REG_ADDR8(0x1401e1)
enum{
	//RSVD
	FLD_RST1_SYS_STIMER 	= 	BIT(1),
	FLD_RST1_DMA 			=	BIT(2),
	FLD_RST1_ALGM 			= 	BIT(3),
	FLD_RST1_PKE 			= 	BIT(4),
	//RSVD
	FLD_RST1_PSPI 			=	BIT(6),
	FLD_RST1_SPISLV 		=	BIT(7),
};

#define reg_rst2					REG_ADDR8(0x1401e2)
enum{
	FLD_RST2_TIMER 			=	BIT(0),
	FLD_RST2_AUD 			=	BIT(1),
	FLD_RST2_TRNG 			=	BIT(2),
	//RSVD
	FLD_RST2_MCU 			=	BIT(4),
	FLD_RST2_LM 			= 	BIT(5),
	FLD_RST2_NPE 			=	BIT(6),
	//RSVD
};

#define reg_rst3					REG_ADDR8(0x1401e3)
enum{
	FLD_RST3_ZB 			=	BIT(0),
	FLD_RST3_MSTCLK 		=	BIT(1),
	FLD_RST3_LPCLK 			=	BIT(2),
	FLD_RST3_ZB_CRYPT 		=	BIT(3),
	FLD_RST3_MSPI 	    	=	BIT(4),
	FLD_RST3_CODEC  		=	BIT(5),
	FLD_RST3_SARADC			= 	BIT(6),
	FLD_RST3_ALG 			=	BIT(7),
};

#define reg_clk_en					REG_ADDR32(0x1401e4)

#define reg_clk_en0					REG_ADDR8(0x1401e4)
enum{
	FLD_CLK0_HSPI_EN 		= 	BIT(0),
	FLD_CLK0_I2C_EN 		= 	BIT(1),
	FLD_CLK0_UART0_EN 		= 	BIT(2),
	FLD_CLK0_USB_EN 		= 	BIT(3),
	FLD_CLK0_PWM_EN 		= 	BIT(4),
	FLD_CLK0_UART1_EN 		= 	BIT(6),
	FLD_CLK0_SWIRE_EN 		= 	BIT(7),
};

#define reg_clk_en1					REG_ADDR8(0x1401e5)
enum{
	FLD_CLK1_SYS_TIMER_EN 	= 	BIT(1),
	FLD_CLK1_ALGM_EN 		= 	BIT(3),
	FLD_CLK1_PKE_EN 		= 	BIT(4),
	FLD_CLK1_MACHINETIME_EN = 	BIT(5),
	FLD_CLK1_PSPI_EN 		= 	BIT(6),
	FLD_CLK1_SPISLV_EN 		= 	BIT(7),

};

#define reg_clk_en2					REG_ADDR8(0x1401e6)
enum{
	FLD_CLK2_TIMER_EN 		= 	BIT(0),
	FLD_CLK2_AUD_EN 		= 	BIT(1),
	FLD_CLK2_TRNG_EN 		= 	BIT(2),
	FLD_CLK2_MCU_EN 		= 	BIT(4),

	FLD_CLK2_NPE_EN 		= 	BIT(6),
	FLD_CLK2_EOC_EN 		= 	BIT(7),
};

#define reg_clk_en3					REG_ADDR8(0x1401e7)
enum{
	FLD_CLK3_ZB_PCLK_EN 	=	BIT(0),
	FLD_CLK3_ZB_MSTCLK_EN 	=	BIT(1),
	FLD_CLK3_ZB_LPCLK_EN 	=	BIT(2),
};

#define reg_clk_sel0				REG_ADDR8(0x1401e8)
enum{
	FLD_CLK_SCLK_DIV 		=	BIT_RNG(0,3),
	FLD_CLK_SCLK_SEL 		=	BIT_RNG(4,6),
	FLD_CLK_MSPI_CLK_SEL	=	BIT(7),
};

#define reg_clk_sel1				REG_ADDR8(0x1401e9)
enum{
	FLD_CLK_MSPI_DIV	 	=	BIT_RNG(4,7),
};

#define reg_i2s_step				REG_ADDR8(SC_BASE_ADDR+0x2a)
enum{
	FLD_I2S_STEP         	=	BIT_RNG(0,6),
	FLD_I2S_CLK_EN         	=	BIT(7),
};

#define reg_i2s_mod				   	REG_ADDR8(SC_BASE_ADDR+0x2b)


#define reg_dmic_step				REG_ADDR8(SC_BASE_ADDR+0x2c)
enum{
	FLD_DMIC_STEP         	=	BIT_RNG(0,6),
	FLD_DMIC_SEL        	=	BIT(7),
};

#define reg_dmic_mod				REG_ADDR8(SC_BASE_ADDR+0x2d)

#define reg_wakeup_en				REG_ADDR8(SC_BASE_ADDR+0x2e)
enum{
	FLD_USB_PWDN_I        	=	BIT(0),
	FLD_GPIO_WAKEUP_I       =	BIT(1),
	FLD_USB_RESUME        	=	BIT(2),
	FLD_STANDBY_EX        	=	BIT(3),
};

#define reg_dmic_clk_set			REG_ADDR8(SC_BASE_ADDR+0x33)


#define reg_wakeup_status			0x64
typedef enum{
	FLD_WKUP_CMP			=	BIT(0),
	FLD_WKUP_TIMER			=	BIT(1),
	FLD_WKUP_DIG			=	BIT(2),
	FLD_WKUP_PAD			=	BIT(3),
	FLD_WKUP_MDEC			=	BIT(4),
	FLD_MDEC_RSVD			=	BIT_RNG(5,7),
}wakeup_status_e;