/******************************************************************************
 * Copyright (c) 2022 Telink Semiconductor (Shanghai) Co., Ltd. ("TELINK")
 * All rights reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 *****************************************************************************/

/********************************************************************************************************
 * @file	mspi_reg.h
 *
 * @brief	This is the header file for B91
 *
 * @author	Driver Group
 *
 *******************************************************************************************************/
#pragma once

#include "../sys.h"

/*******************************      MSPI registers: 0x140100      ******************************/
#define reg_mspi_data       REG_ADDR8(0x140100)

#define reg_mspi_fm       	REG_ADDR8(0x140101)
enum{
	FLD_MSPI_RD_TRIG_EN		=  BIT(0),
	FLD_MSPI_RD_MODE		=  BIT(1),
	FLD_MSPI_DATA_LINE		=  BIT_RNG(2,3),
	FLD_MSPI_CSN			=  BIT(4),
};

#define reg_mspi_status     REG_ADDR8(0x140102)
enum{
	FLD_MSPI_BUSY			=  BIT(0),
};

#define reg_mspi_fm1		REG_ADDR8(0x140103)
enum{
	FLD_MSPI_TIMEOUT_CNT	=  BIT_RNG(0,2),
	FLD_MSPI_CS2SCL_CNT		=  BIT_RNG(3,4),
	FLD_MSPI_CS2CS_CNT		=  BIT_RNG(5,7),
};

#define reg_mspi_config	    REG_ADDR32(0x140104)
#define reg_mspi_set_l		REG_ADDR8(0x140104)
enum{
	FLD_MSPI_MULTIBOOT_ADDR_OFFSET	=  BIT_RNG(0,2),/**<mutiboot address offset option, 0:0k;  1:128k;  2:256k;  4:256k*/
};

#define reg_mspi_set_h   	REG_ADDR8(0x140105)
enum{
	FLD_MSPI_PROGRAM_SPACE_SIZE		=  BIT_RNG(0,6),/**< program space size = mspi_set_h*4k*/
};
#define reg_mspi_xip_config	REG_ADDR16(0x140106)
#define reg_mspi_cmd_ahb   	REG_ADDR8(0x140106)
enum{
	FLD_MSPI_RD_CMD			=  BIT_RNG(0,7), /**< xip read command */
};

#define reg_mspi_fm_ahb   	REG_ADDR8(0x140107)
enum{
	FLD_MSPI_DUMMY			=  BIT_RNG(0,3),/**< dummy cycle = FLD_MSPI_DUMMY + 1 */
	FLD_MSPI_DAT_LINE		=  BIT_RNG(4,5),/**< 0:single line;  1: dual line;  2:quad line; 3:quad line */
	FLD_MSPI_ADDR_LINE		=  BIT(6),      /**< 0:single line;   1:the same to dat_line_h */
	FLD_MSPI_CMD_LINE		=  BIT(7),      /**< 0:single line;   1:the same to dat_line_h */
};