/** ****************************************************************************** * @file stm32wlxx_hal_timebase_rtc_wakeup_template.c * @author MCD Application Team * @brief HAL time base based on the hardware RTC_WAKEUP Template. * * This file overrides the native HAL time base functions (defined as weak) * to use the RTC WAKEUP for the time base generation: * + Initializes the RTC peripheral and configures the wakeup timer to be * incremented each 1ms when uwTickFreq is set to default value, else * 10 ms or 100 ms, depending of above global variable value. * + HAL_IncTick is called inside the HAL_RTCEx_WakeUpTimerEventCallback * + HSE (default), LSE or LSI can be selected as RTC clock source @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] This file must be copied to the application folder and modified as follows: (#) Rename it to 'stm32wlxx_hal_timebase_rtc_wakeup.c' (#) Add this file and the RTC HAL drivers to your project and uncomment HAL_RTC_MODULE_ENABLED define in stm32wlxx_hal_conf.h @endverbatim ****************************************************************************** * @attention * * Copyright (c) 2020 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32wlxx_hal.h" /** @addtogroup STM32WLxx_HAL_Driver * @{ */ /** @defgroup HAL_TimeBase_RTC_WakeUp_Template HAL TimeBase RTC WakeUp Template * @{ */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Uncomment the line below to select the appropriate RTC Clock source for your application: + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing precision. + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing precision. */ /* #define RTC_CLOCK_SOURCE_HSE */ /* #define RTC_CLOCK_SOURCE_LSE */ #define RTC_CLOCK_SOURCE_LSI #if !defined(RTC_CLOCK_SOURCE_LSI) && !defined(RTC_CLOCK_SOURCE_LSE) && !defined(RTC_CLOCK_SOURCE_HSE) #error Please select the RTC Clock source AT PROJECT LEVEL #endif #if defined (RTC_CLOCK_SOURCE_LSE) /* LSE Freq = 32.768 kHz RC */ #define RTC_ASYNCH_PREDIV 0x7Fu #define RTC_SYNCH_PREDIV 0x00FFu #elif defined (RTC_CLOCK_SOURCE_LSI) /* LSI Freq = 32 kHz RC */ #define RTC_ASYNCH_PREDIV 0x7Fu #define RTC_SYNCH_PREDIV 0x00FEu #elif defined (RTC_CLOCK_SOURCE_HSE) /* HSE Freq as RTCCLK = 32 MHz / 32 = 1 MHz */ #define RTC_ASYNCH_PREDIV 0x7Fu #define RTC_SYNCH_PREDIV 0x1E83u #endif /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ RTC_HandleTypeDef hRTC_Handle = {.Init = {0}}; /* Private function prototypes -----------------------------------------------*/ #if defined(CORE_CM0PLUS) void RTC_LSECSS_IRQHandler(void); #else void RTC_WKUP_IRQHandler(void); #endif /* Private functions ---------------------------------------------------------*/ /** * @brief This function configures the RTC_WKUP as a time base source. * The time source is configured to have 1ms time base with a dedicated * Tick interrupt priority. * Wakeup Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK = 1ms * Wakeup Time = WakeupTimebase * WakeUpCounter (0 + 1) = 1 ms * @note This function is called automatically at the beginning of program after * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). * @param TickPriority: Tick interrupt priority. * @retval HAL status */ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) { HAL_StatusTypeDef status = HAL_OK; uint32_t wucounter; RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/ if ((uint32_t)uwTickFreq != 0U) { /* Disable backup domeain protection */ HAL_PWR_EnableBkUpAccess(); /* Enable RTC APB clock gating */ __HAL_RCC_RTCAPB_CLK_ENABLE(); /* Disable the Wake-up Timer */ __HAL_RTC_WAKEUPTIMER_DISABLE(&hRTC_Handle); /* In case of interrupt mode is used, the interrupt source must disabled */ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle,RTC_IT_WUT); __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(&hRTC_Handle,RTC_FLAG_WUTF); /* Get RTC clock configuration */ HAL_RCCEx_GetPeriphCLKConfig(&PeriphClkInitStruct); /*In case of RTC clock already enable, make sure it's the good one */ #ifdef RTC_CLOCK_SOURCE_LSE if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_LSE) && (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != 0x00u)) #elif defined (RTC_CLOCK_SOURCE_LSI) if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_LSI) && (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != 0x00u)) #elif defined (RTC_CLOCK_SOURCE_HSE) if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_HSE_DIV32) && (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != 0x00u)) #else #error Please select the RTC Clock source #endif { /* Do nothing */ } else { #ifdef RTC_CLOCK_SOURCE_LSE /* Configure LSE as RTC clock source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; RCC_OscInitStruct.LSEState = RCC_LSE_ON; PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; #elif defined (RTC_CLOCK_SOURCE_LSI) /* Configure LSI as RTC clock source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; RCC_OscInitStruct.LSIState = RCC_LSI_ON; PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; #elif defined (RTC_CLOCK_SOURCE_HSE) /* Configure HSE as RTC clock source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS_PWR; /* Ensure that RTC is clocked by 1MHz */ PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV32; #endif /* COnfigure oscillator */ status = HAL_RCC_OscConfig(&RCC_OscInitStruct); if(status == HAL_OK) { /* Configure RTC clock source */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); /* Enable RTC Clock */ if(status == HAL_OK) { __HAL_RCC_RTC_ENABLE(); } } } /* If RTC Clock configuration is ok */ if(status == HAL_OK) { /* No care of RTC init parameter here. Only needed if RTC is being used for other features in same time: calendar, alarm, timestamp, etc... */ hRTC_Handle.Instance = RTC; hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; status = HAL_RTC_Init(&hRTC_Handle); if(status == HAL_OK) { /* The time base should be of (uint32_t)uwTickFreq) ms. Tick counter is incremented eachtime wakeup time reaches zero. Wakeup timer is clocked on RTCCLK divided by 2. So downcounting counter has to be set to (RTCCLK / 2) / (1000 / (uint32_t)uwTickFreq)) minus 1 */ #ifdef RTC_CLOCK_SOURCE_LSE wucounter = LSE_VALUE; #elif defined (RTC_CLOCK_SOURCE_LSI) wucounter = LSI_VALUE; #elif defined (RTC_CLOCK_SOURCE_HSE) /* HSE input clock to RTC is divided by 32 */ wucounter = (HSE_VALUE >> 5); #endif wucounter = ((wucounter >> 1) / (1000U / (uint32_t)uwTickFreq)) -1u; status = HAL_RTCEx_SetWakeUpTimer_IT(&hRTC_Handle, wucounter, RTC_WAKEUPCLOCK_RTCCLK_DIV2, 0); if(status == HAL_OK) { /* Enable the RTC global Interrupt */ #if defined(CORE_CM0PLUS) HAL_NVIC_EnableIRQ(RTC_LSECSS_IRQn); #else HAL_NVIC_EnableIRQ(RTC_WKUP_IRQn); #endif /* Configure the SysTick IRQ priority */ if (TickPriority < (1UL << __NVIC_PRIO_BITS)) { #if defined(CORE_CM0PLUS) HAL_NVIC_SetPriority(RTC_LSECSS_IRQn, TickPriority, 0U); #else HAL_NVIC_SetPriority(RTC_WKUP_IRQn, TickPriority, 0U); #endif uwTickPrio = TickPriority; } else { status = HAL_ERROR; } } } } } else { status = HAL_ERROR; } return status; } /** * @brief Suspend Tick increment. * @note Disable the tick increment by disabling RTC_WKUP interrupt. * @retval None */ void HAL_SuspendTick(void) { /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); /* Disable WAKE UP TIMER Interrupt */ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); } /** * @brief Resume Tick increment. * @note Enable the tick increment by Enabling RTC_WKUP interrupt. * @retval None */ void HAL_ResumeTick(void) { /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); /* Enable WAKE UP TIMER interrupt */ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); } /** * @brief Wake Up Timer Event Callback in non blocking mode * @note This function is called when RTC_WKUP interrupt takes place, inside * RTC_WKUP_IRQHandler(). It makes a direct call to HAL_IncTick() to increment * a global variable "uwTick" used as application time base. * @param hrtc : RTC handle * @retval None */ void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) { HAL_IncTick(); } /** * @brief This function handles WAKE UP TIMER interrupt request. * @retval None */ #if defined(CORE_CM0PLUS) void RTC_LSECSS_IRQHandler(void) #else void RTC_WKUP_IRQHandler(void) #endif { HAL_RTCEx_WakeUpTimerIRQHandler(&hRTC_Handle); } /** * @} */ /** * @} */