/**
  ******************************************************************************
  * @file    stm32u5xx_ll_rcc.h
  * @author  MCD Application Team
  * @brief   Header file of RCC LL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32U5xx_LL_RCC_H
#define STM32U5xx_LL_RCC_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32u5xx.h"

/** @addtogroup STM32U5xx_LL_Driver
  * @{
  */

#if defined(RCC)

/** @defgroup RCC_LL RCC
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup RCC_LL_Private_Constants RCC Private Constants
  * @{
  */
/* Defines used to perform offsets*/
/* Offset used to access to RCC_CCIPR1 and RCC_CCIPR2 registers */
#define RCC_OFFSET_CCIPR1       0U
#define RCC_OFFSET_CCIPR2       0x04U
#define RCC_OFFSET_CCIPR3       0x08U

/* Defines used for security configuration extension */
#define RCC_SECURE_MASK         0x1FFFU
/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RCC_LL_Exported_Types RCC Exported Types
  * @{
  */

/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure
  * @{
  */

/**
  * @brief  RCC Clocks Frequency Structure
  */
typedef struct
{
  uint32_t SYSCLK_Frequency;        /*!< SYSCLK clock frequency */
  uint32_t HCLK_Frequency;          /*!< HCLK clock frequency */
  uint32_t PCLK1_Frequency;         /*!< PCLK1 clock frequency */
  uint32_t PCLK2_Frequency;         /*!< PCLK2 clock frequency */
  uint32_t PCLK3_Frequency;         /*!< PCLK3 clock frequency */
} LL_RCC_ClocksTypeDef;

/**
  * @}
  */

/**
  * @}
  */
#endif /* USE_FULL_LL_DRIVER */

/* Exported constants --------------------------------------------------------*/
/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants
  * @{
  */

/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation
  * @brief    Defines used to adapt values of different oscillators
  * @note     These values could be modified in the user environment according to
  *           HW set-up.
  * @{
  */
#if !defined  (HSE_VALUE)
#define HSE_VALUE    8000000U   /*!< Value of the HSE oscillator in Hz */
#endif /* HSE_VALUE */

#if !defined  (HSI_VALUE)
#define HSI_VALUE    16000000U  /*!< Value of the HSI oscillator in Hz */
#endif /* HSI_VALUE */

#if !defined  (LSE_VALUE)
#define LSE_VALUE    32768U     /*!< Value of the LSE oscillator in Hz */
#endif /* LSE_VALUE */

#if !defined  (LSI_VALUE)
#define LSI_VALUE    32000U     /*!< Value of the LSI oscillator in Hz */
#endif /* LSI_VALUE */

#if !defined  (HSI48_VALUE)
#define HSI48_VALUE  48000000U  /*!< Value of the HSI48 oscillator in Hz */
#endif /* HSI48_VALUE */

#if !defined  (EXTERNAL_SAI1_CLOCK_VALUE)
#define EXTERNAL_SAI1_CLOCK_VALUE    48000U /*!< Value of the SAI1_EXTCLK external oscillator in Hz */
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */

#if !defined  (EXTERNAL_SAI2_CLOCK_VALUE)
#define EXTERNAL_SAI2_CLOCK_VALUE    48000U /*!< Value of the SAI2_EXTCLK external oscillator in Hz */
#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_LSIPRE  LSI prescaler
  * @{
  */
#define LL_RCC_LSI_DIV_1                   0x00000000U          /*!< LSI divided by 1   */
#define LL_RCC_LSI_DIV_128                 RCC_BDCR_LSIPREDIV   /*!< LSI divided by 128 */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_LSEDRIVE  LSE oscillator drive capability
  * @{
  */
#define LL_RCC_LSEDRIVE_LOW                0x00000000U             /*!< Xtal mode lower driving capability */
#define LL_RCC_LSEDRIVE_MEDIUMLOW          RCC_BDCR_LSEDRV_0       /*!< Xtal mode medium low driving capability */
#define LL_RCC_LSEDRIVE_MEDIUMHIGH         RCC_BDCR_LSEDRV_1       /*!< Xtal mode medium high driving capability */
#define LL_RCC_LSEDRIVE_HIGH               RCC_BDCR_LSEDRV         /*!< Xtal mode higher driving capability */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MSI_OSCILLATOR MSI clock Trimming
  * @{
  */
#define LL_RCC_MSI_OSCILLATOR_0            0x00000000U     /*!< MSI clock trimming for ranges 0 to 3 */
#define LL_RCC_MSI_OSCILLATOR_1            0x00000005U     /*!< MSI clock trimming for ranges 4 to 7 */
#define LL_RCC_MSI_OSCILLATOR_2            0x0000000AU     /*!< MSI clock trimming for ranges 8 to 11 */
#define LL_RCC_MSI_OSCILLATOR_3            0x0000000FU     /*!< MSI clock trimming for ranges 12 to 15 */
/**
  * @}
  */


/** @defgroup RCC_LL_EC_MSISRANGE MSIS Clock Range
  * @{
  */
#define LL_RCC_MSISRANGE_0                  0x00000000U                                                                                        /*!< MSIS = 48 MHz    */
#define LL_RCC_MSISRANGE_1                  RCC_ICSCR1_MSISRANGE_0                                                                             /*!< MSIS = 24 MHz    */
#define LL_RCC_MSISRANGE_2                  RCC_ICSCR1_MSISRANGE_1                                                                             /*!< MSIS = 16 MHz    */
#define LL_RCC_MSISRANGE_3                  (RCC_ICSCR1_MSISRANGE_0 | RCC_ICSCR1_MSISRANGE_1)                                                  /*!< MSIS = 12 MHz    */
#define LL_RCC_MSISRANGE_4                  RCC_ICSCR1_MSISRANGE_2                                                                             /*!< MSIS = 4 MHz     */
#define LL_RCC_MSISRANGE_5                  (RCC_ICSCR1_MSISRANGE_0 | RCC_ICSCR1_MSISRANGE_2)                                                  /*!< MSIS = 2 MHz     */
#define LL_RCC_MSISRANGE_6                  (RCC_ICSCR1_MSISRANGE_1 | RCC_ICSCR1_MSISRANGE_2)                                                  /*!< MSIS = 1.5 MHz   */
#define LL_RCC_MSISRANGE_7                  (RCC_ICSCR1_MSISRANGE_0 | RCC_ICSCR1_MSISRANGE_1 | RCC_ICSCR1_MSISRANGE_2)                         /*!< MSIS = 1 MHz     */
#define LL_RCC_MSISRANGE_8                   RCC_ICSCR1_MSISRANGE_3                                                                            /*!< MSIS = 3.072 MHz */
#define LL_RCC_MSISRANGE_9                  (RCC_ICSCR1_MSISRANGE_0 | RCC_ICSCR1_MSISRANGE_3)                                                  /*!< MSIS = 1.536 MHz */
#define LL_RCC_MSISRANGE_10                 (RCC_ICSCR1_MSISRANGE_1 | RCC_ICSCR1_MSISRANGE_3)                                                  /*!< MSIS = 1.024 MHz */
#define LL_RCC_MSISRANGE_11                 (RCC_ICSCR1_MSISRANGE_0 | RCC_ICSCR1_MSISRANGE_1 | RCC_ICSCR1_MSISRANGE_3)                         /*!< MSIS = 768 KHz   */
#define LL_RCC_MSISRANGE_12                 (RCC_ICSCR1_MSISRANGE_2 | RCC_ICSCR1_MSISRANGE_3)                                                  /*!< MSIS = 400 KHz   */
#define LL_RCC_MSISRANGE_13                 (RCC_ICSCR1_MSISRANGE_0 | RCC_ICSCR1_MSISRANGE_2 | RCC_ICSCR1_MSISRANGE_3)                         /*!< MSIS = 200 KHz   */
#define LL_RCC_MSISRANGE_14                 (RCC_ICSCR1_MSISRANGE_1 | RCC_ICSCR1_MSISRANGE_2 | RCC_ICSCR1_MSISRANGE_3)                         /*!< MSIS = 150 KHz   */
#define LL_RCC_MSISRANGE_15                 (RCC_ICSCR1_MSISRANGE_0 | RCC_ICSCR1_MSISRANGE_1| RCC_ICSCR1_MSISRANGE_2 | \
                                             RCC_ICSCR1_MSISRANGE_3) /*!< MSIS = 100 KHz   */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MSIKRANGE MSIK Clock Range
  * @{
  */
#define LL_RCC_MSIKRANGE_0                 0x00000000U                                                                                         /*!< MSIK = 48 MHz    */
#define LL_RCC_MSIKRANGE_1                 RCC_ICSCR1_MSIKRANGE_0                                                                              /*!< MSIK = 24 MHz    */
#define LL_RCC_MSIKRANGE_2                 RCC_ICSCR1_MSIKRANGE_1                                                                              /*!< MSIK = 16 MHz    */
#define LL_RCC_MSIKRANGE_3                 (RCC_ICSCR1_MSIKRANGE_0 | RCC_ICSCR1_MSIKRANGE_1)                                                   /*!< MSIK = 12 MHz    */
#define LL_RCC_MSIKRANGE_4                 RCC_ICSCR1_MSIKRANGE_2                                                                              /*!< MSIK = 4 MHz     */
#define LL_RCC_MSIKRANGE_5                 (RCC_ICSCR1_MSIKRANGE_0 | RCC_ICSCR1_MSIKRANGE_2)                                                   /*!< MSIK = 2 MHz     */
#define LL_RCC_MSIKRANGE_6                 (RCC_ICSCR1_MSIKRANGE_1 | RCC_ICSCR1_MSIKRANGE_2)                                                   /*!< MSIK = 1.5 MHz   */
#define LL_RCC_MSIKRANGE_7                 (RCC_ICSCR1_MSIKRANGE_0 | RCC_ICSCR1_MSIKRANGE_1 | RCC_ICSCR1_MSIKRANGE_2)                          /*!< MSIK = 1 MHz     */
#define LL_RCC_MSIKRANGE_8                  RCC_ICSCR1_MSIKRANGE_3                                                                             /*!< MSIK = 3.072 MHz */
#define LL_RCC_MSIKRANGE_9                 (RCC_ICSCR1_MSIKRANGE_0 | RCC_ICSCR1_MSIKRANGE_3)                                                   /*!< MSIK = 1.536 MHz */
#define LL_RCC_MSIKRANGE_10                (RCC_ICSCR1_MSIKRANGE_1 | RCC_ICSCR1_MSIKRANGE_3)                                                   /*!< MSIK = 1.024 MHz */
#define LL_RCC_MSIKRANGE_11                (RCC_ICSCR1_MSIKRANGE_0 | RCC_ICSCR1_MSIKRANGE_1 | RCC_ICSCR1_MSIKRANGE_3)                          /*!< MSIK = 768 KHz   */
#define LL_RCC_MSIKRANGE_12                (RCC_ICSCR1_MSIKRANGE_2 | RCC_ICSCR1_MSIKRANGE_3)                                                   /*!< MSIK = 400 KHz   */
#define LL_RCC_MSIKRANGE_13                (RCC_ICSCR1_MSIKRANGE_0 | RCC_ICSCR1_MSIKRANGE_2 | RCC_ICSCR1_MSIKRANGE_3)                          /*!< MSIK = 200 KHz   */
#define LL_RCC_MSIKRANGE_14                (RCC_ICSCR1_MSIKRANGE_1 | RCC_ICSCR1_MSIKRANGE_2 | RCC_ICSCR1_MSIKRANGE_3)                          /*!< MSIK = 150 KHz   */
#define LL_RCC_MSIKRANGE_15                (RCC_ICSCR1_MSIKRANGE_0 | RCC_ICSCR1_MSIKRANGE_1 | RCC_ICSCR1_MSIKRANGE_2 | \
                                            RCC_ICSCR1_MSIKRANGE_3) /*!< MSIK = 100 KHz   */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MSISSRANGE  MSIS range after Standby mode
  * @{
  */
#define LL_RCC_MSISSRANGE_4                  RCC_CSR_MSISSRANGE_2                                                /*!< MSIS = 4 MHz    */
#define LL_RCC_MSISSRANGE_5                 (RCC_CSR_MSISSRANGE_2 | RCC_CSR_MSISSRANGE_0)                        /*!< MSIS = 2 MHz    */
#define LL_RCC_MSISSRANGE_6                 (RCC_CSR_MSISSRANGE_2 | RCC_CSR_MSISSRANGE_1)                        /*!< MSIS = 1.5 MHz  */
#define LL_RCC_MSISSRANGE_7                 (RCC_CSR_MSISSRANGE_0 | RCC_CSR_MSISSRANGE_2 | RCC_CSR_MSISSRANGE_1) /*!< MSIS = 1 MHz  */
#define LL_RCC_MSISSRANGE_8                  RCC_CSR_MSISSRANGE_3                                                /*!< MSIS = 3.072 MHz*/
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MSIKSRANGE  MSIK range after Standby mode
  * @{
  */
#define LL_RCC_MSIKSRANGE_4                  RCC_CSR_MSIKSRANGE_2                                                /*!< MSIK = 4 MHz    */
#define LL_RCC_MSIKSRANGE_5                 (RCC_CSR_MSIKSRANGE_2 | RCC_CSR_MSIKSRANGE_0)                        /*!< MSIK = 2 MHz    */
#define LL_RCC_MSIKSRANGE_6                 (RCC_CSR_MSIKSRANGE_2 | RCC_CSR_MSIKSRANGE_1)                        /*!< MSIK = 1.5 MHz  */
#define LL_RCC_MSIKSRANGE_7                 (RCC_CSR_MSIKSRANGE_2 | RCC_CSR_MSIKSRANGE_1 | RCC_CSR_MSIKSRANGE_0) /*!< MSIK = 1 MHz  */
#define LL_RCC_MSIKSRANGE_8                  RCC_CSR_MSIKSRANGE_3                                                /*!< MSIK = 3.072 MHz*/
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MSIPLLMODE  MSIS/MSIK Pll Mode
  * @{
  */
#define LL_RCC_PLLMODE_MSIS                  RCC_CR_MSIPLLSEL   /*!< MSIS selection for Pll Mode  */
#define LL_RCC_PLLMODE_MSIK                  0U                 /*!< MSIK selection for Pll Mode */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MSIBIASMODE  MSI BIAS Mode
  * @{
  */
#define LL_RCC_MSIBIASMODE_SAMPLING           RCC_ICSCR1_MSIBIAS   /*!< Sampling mode selection for MSI*/
#define LL_RCC_MSIBIASMODE_CONTINUOUS         0U                   /*!< Continuous mode selection for MSI*/
/**
  * @}
  */

/** @defgroup RCC_LL_EC_HSEEXT  EXTERNAL HSE Mode
  * @{
  */
#define LL_RCC_HSE_ANALOG_MODE               0U                    /*!< HSE clock used as ANALOG clock source */
#define LL_RCC_HSE_DIGITAL_MODE              RCC_CR_HSEEXT         /*!< HSE clock used as DIGITAL clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE  LSCO Selection
  * @{
  */
#define LL_RCC_LSCO_CLKSOURCE_LSI            0x00000000U           /*!< LSI selection for low speed clock  */
#define LL_RCC_LSCO_CLKSOURCE_LSE            RCC_BDCR_LSCOSEL      /*!< LSE selection for low speed clock  */
/**
  * @}
  */


/** @defgroup RCC_LL_EC_PLL1MBOOST_DIV  EPOD prescaler
  * @{
  */
#define LL_RCC_PLL1MBOOST_DIV_1              0x00000000U                                                                         /*!< PLL1CLK not divided   */
#define LL_RCC_PLL1MBOOST_DIV_2              RCC_PLL1CFGR_PLL1MBOOST_0                                                           /*!< PLL1CLK divided by 2  */
#define LL_RCC_PLL1MBOOST_DIV_4              RCC_PLL1CFGR_PLL1MBOOST_1                                                           /*!< PLL1CLK divided by 4  */
#define LL_RCC_PLL1MBOOST_DIV_6              (RCC_PLL1CFGR_PLL1MBOOST_1 | RCC_PLL1CFGR_PLL1MBOOST_0)                             /*!< PLL1CLK divided by 6  */
#define LL_RCC_PLL1MBOOST_DIV_8              RCC_PLL1CFGR_PLL1MBOOST_2                                                           /*!< PLL1CLK divided by 8  */
#define LL_RCC_PLL1MBOOST_DIV_10             (RCC_PLL1CFGR_PLL1MBOOST_2 | RCC_PLL1CFGR_PLL1MBOOST_0)                             /*!< PLL1CLK divided by 10 */
#define LL_RCC_PLL1MBOOST_DIV_12             (RCC_PLL1CFGR_PLL1MBOOST_2 | RCC_PLL1CFGR_PLL1MBOOST_1)                             /*!< PLL1CLK divided by 12 */
#define LL_RCC_PLL1MBOOST_DIV_14             (RCC_PLL1CFGR_PLL1MBOOST_2 | RCC_PLL1CFGR_PLL1MBOOST_1 | \
                                              RCC_PLL1CFGR_PLL1MBOOST_0) /*!< PLL1CLK divided by 14 */
#define LL_RCC_PLL1MBOOST_DIV_16             RCC_PLL1CFGR_PLL1MBOOST_3                                                           /*!< PLL1CLK divided by 16 */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SYS_CLKSOURCE  System clock switch
  * @{
  */
#define LL_RCC_SYS_CLKSOURCE_MSIS            0x00000000U                         /*!< MSIS selection as system clock */
#define LL_RCC_SYS_CLKSOURCE_HSI             RCC_CFGR1_SW_0                      /*!< HSI oscillator selection as system clock */
#define LL_RCC_SYS_CLKSOURCE_HSE             RCC_CFGR1_SW_1                      /*!< HSE selection as system clock */
#define LL_RCC_SYS_CLKSOURCE_PLL1            (RCC_CFGR1_SW_1 | RCC_CFGR1_SW_0)   /*!< PLL selection as system clock */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS  System clock switch status
  * @{
  */
#define LL_RCC_SYS_CLKSOURCE_STATUS_MSIS     0x00000000U                          /*!< MSIS used as system clock */
#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI      RCC_CFGR1_SWS_0                      /*!< HSI used as system clock */
#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE      RCC_CFGR1_SWS_1                      /*!< HSE used as system clock */
#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL1     (RCC_CFGR1_SWS_1 | RCC_CFGR1_SWS_0)  /*!< PLL1 used as system clock */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SYSCLK_DIV  AHB prescaler
  * @{
  */
#define LL_RCC_SYSCLK_DIV_1                  0x00000000U                                                                /*!< SYSCLK not divided */
#define LL_RCC_SYSCLK_DIV_2                  RCC_CFGR2_HPRE_3                                                           /*!< SYSCLK divided by 2 */
#define LL_RCC_SYSCLK_DIV_4                  (RCC_CFGR2_HPRE_3 | RCC_CFGR2_HPRE_0)                                      /*!< SYSCLK divided by 4 */
#define LL_RCC_SYSCLK_DIV_8                  (RCC_CFGR2_HPRE_3 | RCC_CFGR2_HPRE_1)                                      /*!< SYSCLK divided by 8 */
#define LL_RCC_SYSCLK_DIV_16                 (RCC_CFGR2_HPRE_3 | RCC_CFGR2_HPRE_1 | RCC_CFGR2_HPRE_0)                   /*!< SYSCLK divided by 16 */
#define LL_RCC_SYSCLK_DIV_64                 (RCC_CFGR2_HPRE_3 | RCC_CFGR2_HPRE_2)                                      /*!< SYSCLK divided by 64 */
#define LL_RCC_SYSCLK_DIV_128                (RCC_CFGR2_HPRE_3 | RCC_CFGR2_HPRE_2 | RCC_CFGR2_HPRE_0)                   /*!< SYSCLK divided by 128 */
#define LL_RCC_SYSCLK_DIV_256                (RCC_CFGR2_HPRE_3 | RCC_CFGR2_HPRE_2 | RCC_CFGR2_HPRE_1)                   /*!< SYSCLK divided by 256 */
#define LL_RCC_SYSCLK_DIV_512                (RCC_CFGR2_HPRE_3 | RCC_CFGR2_HPRE_2 | RCC_CFGR2_HPRE_1 | \
                                              RCC_CFGR2_HPRE_0)/*!< SYSCLK divided by 512 */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SYSTICK_CLKSOURCE  SYSTICK clock source selection
  * @{
  */
#define LL_RCC_SYSTICK_CLKSOURCE_HCLKDIV8    0x00000000U             /*!< HCLKDIV8   clock used as SYSTICK clock source */
#define LL_RCC_SYSTICK_CLKSOURCE_LSI         RCC_CCIPR1_SYSTICKSEL_0 /*!< LSI clock used as SYSTICK clock source */
#define LL_RCC_SYSTICK_CLKSOURCE_LSE         RCC_CCIPR1_SYSTICKSEL_1 /*!< LSE clock used as SYSTICK clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_APB1_DIV  APB low-speed prescaler (APB1)
  * @{
  */
#define LL_RCC_APB1_DIV_1                    0x00000000U                                                 /*!< HCLK not divided */
#define LL_RCC_APB1_DIV_2                    RCC_CFGR2_PPRE1_2                                           /*!< HCLK divided by 2 */
#define LL_RCC_APB1_DIV_4                    (RCC_CFGR2_PPRE1_2 | RCC_CFGR2_PPRE1_0)                     /*!< HCLK divided by 4 */
#define LL_RCC_APB1_DIV_8                    (RCC_CFGR2_PPRE1_2 | RCC_CFGR2_PPRE1_1)                     /*!< HCLK divided by 8 */
#define LL_RCC_APB1_DIV_16                   (RCC_CFGR2_PPRE1_2 | RCC_CFGR2_PPRE1_1 | RCC_CFGR2_PPRE1_0) /*!< HCLK divided by 16 */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_APB2_DIV  APB high-speed prescaler (APB2)
  * @{
  */
#define LL_RCC_APB2_DIV_1                    0x00000000U                                                 /*!< HCLK not divided */
#define LL_RCC_APB2_DIV_2                    RCC_CFGR2_PPRE2_2                                           /*!< HCLK divided by 2 */
#define LL_RCC_APB2_DIV_4                    (RCC_CFGR2_PPRE2_2 | RCC_CFGR2_PPRE2_0)                     /*!< HCLK divided by 4 */
#define LL_RCC_APB2_DIV_8                    (RCC_CFGR2_PPRE2_2 | RCC_CFGR2_PPRE2_1)                     /*!< HCLK divided by 8 */
#define LL_RCC_APB2_DIV_16                   (RCC_CFGR2_PPRE2_2 | RCC_CFGR2_PPRE2_1 | RCC_CFGR2_PPRE2_0) /*!< HCLK divided by 16 */
/**
  * @}
  */


/** @defgroup RCC_LL_EC_APB3_DIV  APB high-speed prescaler (APB3)
  * @{
  */
#define LL_RCC_APB3_DIV_1                    0x00000000U                                                 /*!< HCLK not divided */
#define LL_RCC_APB3_DIV_2                    RCC_CFGR3_PPRE3_2                                           /*!< HCLK divided by 2 */
#define LL_RCC_APB3_DIV_4                    (RCC_CFGR3_PPRE3_2 | RCC_CFGR3_PPRE3_0)                     /*!< HCLK divided by 4 */
#define LL_RCC_APB3_DIV_8                    (RCC_CFGR3_PPRE3_2 | RCC_CFGR3_PPRE3_1)                     /*!< HCLK divided by 8 */
#define LL_RCC_APB3_DIV_16                   (RCC_CFGR3_PPRE3_2 | RCC_CFGR3_PPRE3_1 | RCC_CFGR3_PPRE3_0) /*!< HCLK divided by 16 */
/**
  * @}
  */

#if defined(RCC_CFGR2_PPRE_DPHY)
/** @defgroup RCC_LL_EC_DPHY_DIV  DSI PHY clock prescaler (DCLK)
  * @{
  */
#define LL_RCC_DPHY_DIV_1                    0x00000000U                                                                  /*!< DCLK not divided */
#define LL_RCC_DPHY_DIV_2                    RCC_CFGR2_PPRE_DPHY_2                                                        /*!< DCLK divided by 2 */
#define LL_RCC_DPHY_DIV_4                    (RCC_CFGR2_PPRE_DPHY_2 | RCC_CFGR2_PPRE_DPHY_0)                              /*!< DCLK divided by 4 */
#define LL_RCC_DPHY_DIV_8                    (RCC_CFGR2_PPRE_DPHY_2 | RCC_CFGR2_PPRE_DPHY_1)                              /*!< DCLK divided by 8 */
#define LL_RCC_DPHY_DIV_16                   (RCC_CFGR2_PPRE_DPHY_2 | RCC_CFGR2_PPRE_DPHY_1 | RCC_CFGR2_PPRE_DPHY_0)      /*!< DCLK divided by 16 */
/**
  * @}
  */
#endif /* RCC_CFGR2_PPRE_DPHY */

/** @defgroup RCC_LL_EC_STOP_WAKEUPCLOCK  Wakeup from Stop and CSS backup clock selection
  * @{
  */
#define LL_RCC_STOP_WAKEUPCLOCK_MSIS         0x00000000U             /*!< MSIS selection after wake-up from STOP */
#define LL_RCC_STOP_WAKEUPCLOCK_HSI          RCC_CFGR1_STOPWUCK      /*!< HSI selection after wake-up from STOP */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_STOP_WAKEUPKERCLOCK  Wakeup from Stop kernel clock automatic enable selection
  * @{
  */
#define LL_RCC_STOP_WAKEUPKERCLOCK_MSIK      0x00000000U             /*!< MSIK oscillator automatically enabled when exiting Stop mode  */
#define LL_RCC_STOP_WAKEUPKERCLOCK_HSI       RCC_CFGR1_STOPKERWUCK   /*!< HSI oscillator automatically enabled when exiting Stop mode */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MCO1SOURCE  MCO1 SOURCE selection
  * @{
  */
#define LL_RCC_MCO1SOURCE_NOCLOCK            0x00000000U                                                  /*!< MCO output disabled, no clock on MCO */
#define LL_RCC_MCO1SOURCE_SYSCLK             RCC_CFGR1_MCOSEL_0                                           /*!< SYSCLK selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_MSIS                RCC_CFGR1_MCOSEL_1                                          /*!< MSIS selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_HSI                (RCC_CFGR1_MCOSEL_0 | RCC_CFGR1_MCOSEL_1)                    /*!< HSI selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_HSE                RCC_CFGR1_MCOSEL_2                                           /*!< HSE selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_PLLCLK             (RCC_CFGR1_MCOSEL_0 | RCC_CFGR1_MCOSEL_2)                    /*!< Main PLL selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_LSI                (RCC_CFGR1_MCOSEL_1 | RCC_CFGR1_MCOSEL_2)                    /*!< LSI selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_LSE                (RCC_CFGR1_MCOSEL_0 | RCC_CFGR1_MCOSEL_1| RCC_CFGR1_MCOSEL_2)/*!< LSE selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_HSI48              RCC_CFGR1_MCOSEL_3                                           /*!< HSI48 selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_MSIK               (RCC_CFGR1_MCOSEL_0 | RCC_CFGR1_MCOSEL_3)                    /*!< MSIK selection as MCO1 source   */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MCO1_DIV  MCO1 prescaler
  * @{
  */
#define LL_RCC_MCO1_DIV_1                    0x00000000U                                     /*!< MCO not divided */
#define LL_RCC_MCO1_DIV_2                    RCC_CFGR1_MCOPRE_0                              /*!< MCO divided by 2 */
#define LL_RCC_MCO1_DIV_4                    RCC_CFGR1_MCOPRE_1                              /*!< MCO divided by 4 */
#define LL_RCC_MCO1_DIV_8                    (RCC_CFGR1_MCOPRE_1 | RCC_CFGR1_MCOPRE_0)       /*!< MCO divided by 8 */
#define LL_RCC_MCO1_DIV_16                   RCC_CFGR1_MCOPRE_2                              /*!< MCO divided by 16 */
/**
  * @}
  */

#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency
  * @{
  */
#define LL_RCC_PERIPH_FREQUENCY_NO           0x00000000U                 /*!< No clock enabled for the peripheral            */
#define LL_RCC_PERIPH_FREQUENCY_NA           0xFFFFFFFFU                 /*!< Frequency cannot be provided as external clock */
/**
  * @}
  */
#endif /* USE_FULL_LL_DRIVER */

/** @defgroup RCC_LL_EC_RTC_CLKSOURCE  RTC clock source selection
  * @{
  */
#define LL_RCC_RTC_CLKSOURCE_NONE            0x00000000U             /*!< No clock used as RTC clock */
#define LL_RCC_RTC_CLKSOURCE_LSE             RCC_BDCR_RTCSEL_0       /*!< LSE oscillator clock used as RTC clock */
#define LL_RCC_RTC_CLKSOURCE_LSI             RCC_BDCR_RTCSEL_1       /*!< LSI oscillator clock used as RTC clock */
#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32       RCC_BDCR_RTCSEL         /*!< HSE oscillator clock divided by 32 used as RTC clock */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_USART_CLKSOURCE  Peripheral USARTx clock source selection
  * @{
  */
#define LL_RCC_USART1_CLKSOURCE_PCLK2       ((RCC_OFFSET_CCIPR1 << 24U)| (RCC_CCIPR1_USART1SEL_Pos << 16U))  /*!< PCLK2 clock used as USART1 clock source */
#define LL_RCC_USART1_CLKSOURCE_SYSCLK      ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART1SEL_Pos << 16U) | (RCC_CCIPR1_USART1SEL_0 >> RCC_CCIPR1_USART1SEL_Pos)) /*!< SYSCLK clock used as USART1 clock source */
#define LL_RCC_USART1_CLKSOURCE_HSI         ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART1SEL_Pos << 16U) | (RCC_CCIPR1_USART1SEL_1 >> RCC_CCIPR1_USART1SEL_Pos)) /*!< HSI clock used as USART1 clock source */
#define LL_RCC_USART1_CLKSOURCE_LSE         ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART1SEL_Pos << 16U) | (RCC_CCIPR1_USART1SEL >> RCC_CCIPR1_USART1SEL_Pos))   /*!< LSE clock used as USART1 clock source */
#if defined(USART2)
#define LL_RCC_USART2_CLKSOURCE_PCLK1       ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART2SEL_Pos << 16U))   /*!< PCLK1 clock used as USART2 clock source */
#define LL_RCC_USART2_CLKSOURCE_SYSCLK      ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART2SEL_Pos << 16U) | (RCC_CCIPR1_USART2SEL_0 >> RCC_CCIPR1_USART2SEL_Pos)) /*!< SYSCLK clock used as USART2 clock source */
#define LL_RCC_USART2_CLKSOURCE_HSI         ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART2SEL_Pos << 16U) | (RCC_CCIPR1_USART2SEL_1 >> RCC_CCIPR1_USART2SEL_Pos)) /*!< HSI clock used as USART2 clock source */
#define LL_RCC_USART2_CLKSOURCE_LSE         ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART2SEL_Pos << 16U) | (RCC_CCIPR1_USART2SEL >> RCC_CCIPR1_USART2SEL_Pos))   /*!< LSE clock used as USART2 clock source */
#endif /* USART2 */
#define LL_RCC_USART3_CLKSOURCE_PCLK1       ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART3SEL_Pos << 16U))                           /*!< PCLK3 clock used as USART3 clock source */
#define LL_RCC_USART3_CLKSOURCE_SYSCLK      ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART3SEL_Pos << 16U) | (RCC_CCIPR1_USART3SEL_0 >> RCC_CCIPR1_USART3SEL_Pos)) /*!< SYSCLK clock used as USART3 clock source */
#define LL_RCC_USART3_CLKSOURCE_HSI         ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART3SEL_Pos << 16U) | (RCC_CCIPR1_USART3SEL_1 >> RCC_CCIPR1_USART3SEL_Pos)) /*!< HSI clock used as USART3 clock source */
#define LL_RCC_USART3_CLKSOURCE_LSE         ((RCC_OFFSET_CCIPR1 << 24U) |(RCC_CCIPR1_USART3SEL_Pos << 16U) | (RCC_CCIPR1_USART3SEL >> RCC_CCIPR1_USART3SEL_Pos))   /*!< LSE clock used as USART3 clock source */
#if defined (RCC_CCIPR2_USART6SEL)
#define LL_RCC_USART6_CLKSOURCE_PCLK1       ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_USART6SEL_Pos << 16U))                        /*!< PCLK1 clock used as USART6 clock source */
#define LL_RCC_USART6_CLKSOURCE_SYSCLK      ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_USART6SEL_Pos << 16U) | (RCC_CCIPR2_USART6SEL_0 >> RCC_CCIPR2_USART6SEL_Pos)) /*!< SYSCLK clock used as USART6 clock source */
#define LL_RCC_USART6_CLKSOURCE_HSI         ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_USART6SEL_Pos << 16U) | (RCC_CCIPR2_USART6SEL_1 >> RCC_CCIPR2_USART6SEL_Pos)) /*!< HSI clock used as USART6 clock source */
#define LL_RCC_USART6_CLKSOURCE_LSE         ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_USART6SEL_Pos << 16U) | (RCC_CCIPR2_USART6SEL >> RCC_CCIPR2_USART6SEL_Pos))   /*!< LSE clock used as USART6 clock source */
/* Legacy define */
#define LL_RCC_USART6_CLKSOURCE_PCLK2       LL_RCC_USART6_CLKSOURCE_PCLK1
#endif /* RCC_CCIPR2_USART6SEL */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_UART_CLKSOURCE  Peripheral UARTx clock source selection
  * @{
  */
#define LL_RCC_UART4_CLKSOURCE_PCLK1        (RCC_CCIPR1_UART4SEL << 16U)                            /*!< PCLK1 clock used as UART4 clock source */
#define LL_RCC_UART4_CLKSOURCE_SYSCLK       ((RCC_CCIPR1_UART4SEL << 16U) | RCC_CCIPR1_UART4SEL_0)  /*!< SYSCLK clock used as UART4 clock source */
#define LL_RCC_UART4_CLKSOURCE_HSI          ((RCC_CCIPR1_UART4SEL << 16U) | RCC_CCIPR1_UART4SEL_1)  /*!< HSI clock used as UART4 clock source */
#define LL_RCC_UART4_CLKSOURCE_LSE          ((RCC_CCIPR1_UART4SEL << 16U) | RCC_CCIPR1_UART4SEL)    /*!< LSE clock used as UART4 clock source */
#define LL_RCC_UART5_CLKSOURCE_PCLK1        (RCC_CCIPR1_UART5SEL << 16U)                            /*!< PCLK1 clock used as UART5 clock source */
#define LL_RCC_UART5_CLKSOURCE_SYSCLK       ((RCC_CCIPR1_UART5SEL << 16U) | RCC_CCIPR1_UART5SEL_0)  /*!< SYSCLK clock used as UART5 clock source */
#define LL_RCC_UART5_CLKSOURCE_HSI          ((RCC_CCIPR1_UART5SEL << 16U) | RCC_CCIPR1_UART5SEL_1)  /*!< HSI clock used as UART5 clock source */
#define LL_RCC_UART5_CLKSOURCE_LSE          ((RCC_CCIPR1_UART5SEL << 16U) | RCC_CCIPR1_UART5SEL)    /*!< LSE clock used as UART5 clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_LPUART_CLKSOURCE  Peripheral LPUARTx clock source selection
  * @{
  */
#define LL_RCC_LPUART1_CLKSOURCE_PCLK3       0x00000000U                                        /*!< PCLK3 clock used as LPUART1 clock source  */
#define LL_RCC_LPUART1_CLKSOURCE_SYSCLK     RCC_CCIPR3_LPUART1SEL_0                             /*!< SYSCLK clock used as LPUART1 clock source */
#define LL_RCC_LPUART1_CLKSOURCE_HSI        RCC_CCIPR3_LPUART1SEL_1                             /*!< HSI clock used as LPUART1 clock source */
#define LL_RCC_LPUART1_CLKSOURCE_LSE        (RCC_CCIPR3_LPUART1SEL_0 | RCC_CCIPR3_LPUART1SEL_1) /*!< LSE clock used as LPUART1 clock source */
#define LL_RCC_LPUART1_CLKSOURCE_MSIK       RCC_CCIPR3_LPUART1SEL_2                             /*!< MSIK clock used as LPUART1 clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_I2C_CLKSOURCE  Peripheral I2Cx clock source selection
  * @{
  */
#define LL_RCC_I2C1_CLKSOURCE_PCLK1         ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C1SEL_Pos << 16U))                                                    /*!< PCLK1 clock used as I2C1 clock source */
#define LL_RCC_I2C1_CLKSOURCE_SYSCLK        ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C1SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_I2C1SEL_0 >> RCC_CCIPR1_I2C1SEL_Pos)) /*!< SYSCLK clock used as I2C1 clock source */
#define LL_RCC_I2C1_CLKSOURCE_HSI           ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C1SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_I2C1SEL_1 >> RCC_CCIPR1_I2C1SEL_Pos)) /*!< HSI clock used as I2C1 clock source */
#define LL_RCC_I2C1_CLKSOURCE_MSIK          ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C1SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_I2C1SEL >> RCC_CCIPR1_I2C1SEL_Pos))   /*!< MSIK clock used as I2C1 clock source */
#define LL_RCC_I2C2_CLKSOURCE_PCLK1         ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C2SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C2 clock source */
#define LL_RCC_I2C2_CLKSOURCE_SYSCLK        ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C2SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_I2C2SEL_0 >> RCC_CCIPR1_I2C2SEL_Pos)) /*!< SYSCLK clock used as I2C2 clock source */
#define LL_RCC_I2C2_CLKSOURCE_HSI           ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C2SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_I2C2SEL_1 >> RCC_CCIPR1_I2C2SEL_Pos)) /*!< HSI clock used as I2C2 clock source */
#define LL_RCC_I2C2_CLKSOURCE_MSIK          ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C2SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_I2C2SEL >> RCC_CCIPR1_I2C2SEL_Pos))   /*!< MSIK clock used as I2C2 clock source */
#define LL_RCC_I2C3_CLKSOURCE_PCLK3         ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_I2C3SEL_Pos << 16U)) /*!< PCLK3 clock used as I2C3 clock source */
#define LL_RCC_I2C3_CLKSOURCE_SYSCLK        ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_I2C3SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_I2C3SEL_0 >> RCC_CCIPR3_I2C3SEL_Pos)) /*!< SYSCLK clock used as I2C3 clock source */
#define LL_RCC_I2C3_CLKSOURCE_HSI           ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_I2C3SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_I2C3SEL_1 >> RCC_CCIPR3_I2C3SEL_Pos)) /*!< HSI clock used as I2C3 clock source */
#define LL_RCC_I2C3_CLKSOURCE_MSIK          ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_I2C3SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_I2C3SEL >> RCC_CCIPR3_I2C3SEL_Pos))   /*!< MSIK clock used as I2C3 clock source */
#define LL_RCC_I2C4_CLKSOURCE_PCLK1         ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C4SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C4 clock source */
#define LL_RCC_I2C4_CLKSOURCE_SYSCLK        ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C4SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_I2C4SEL_0 >> RCC_CCIPR1_I2C4SEL_Pos)) /*!< SYSCLK clock used as I2C4 clock source */
#define LL_RCC_I2C4_CLKSOURCE_HSI           ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C4SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_I2C4SEL_1 >> RCC_CCIPR1_I2C4SEL_Pos)) /*!< HSI clock used as I2C4 clock source */
#define LL_RCC_I2C4_CLKSOURCE_MSIK          ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C4SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_I2C4SEL >> RCC_CCIPR1_I2C4SEL_Pos))   /*!< MSIK clock used as I2C4 clock source */
#if defined (RCC_CCIPR2_I2C5SEL)
#define LL_RCC_I2C5_CLKSOURCE_PCLK1         ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C5SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C5 clock source */
#define LL_RCC_I2C5_CLKSOURCE_SYSCLK        ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C5SEL_Pos << 16U) | \
                                             (RCC_CCIPR2_I2C5SEL_0 >> RCC_CCIPR2_I2C5SEL_Pos)) /*!< SYSCLK clock used as I2C5 clock source */
#define LL_RCC_I2C5_CLKSOURCE_HSI           ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C5SEL_Pos << 16U) | \
                                             (RCC_CCIPR2_I2C5SEL_1 >> RCC_CCIPR2_I2C5SEL_Pos)) /*!< HSI clock used as I2C5 clock source */
#define LL_RCC_I2C5_CLKSOURCE_MSIK          ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C5SEL_Pos << 16U) | \
                                             (RCC_CCIPR2_I2C5SEL >> RCC_CCIPR2_I2C5SEL_Pos))   /*!< MSIK clock used as I2C5 clock source */
#endif /* RCC_CCIPR2_I2C5SEL */
#if defined (RCC_CCIPR2_I2C6SEL)
#define LL_RCC_I2C6_CLKSOURCE_PCLK1         ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C6SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C6 clock source */
#define LL_RCC_I2C6_CLKSOURCE_SYSCLK        ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C6SEL_Pos << 16U) | \
                                             (RCC_CCIPR2_I2C6SEL_0 >> RCC_CCIPR2_I2C6SEL_Pos)) /*!< SYSCLK clock used as I2C6 clock source */
#define LL_RCC_I2C6_CLKSOURCE_HSI           ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C6SEL_Pos << 16U) | \
                                             (RCC_CCIPR2_I2C6SEL_1 >> RCC_CCIPR2_I2C6SEL_Pos)) /*!< HSI clock used as I2C6 clock source */
#define LL_RCC_I2C6_CLKSOURCE_MSIK          ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C6SEL_Pos << 16U) | \
                                             (RCC_CCIPR2_I2C6SEL >> RCC_CCIPR2_I2C6SEL_Pos))   /*!< MSIK clock used as I2C6 clock source */
#endif /* RCC_CCIPR2_I2C6SEL */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SPI_CLKSOURCE  Peripheral SPIx clock source selection
  * @{
  */
#define LL_RCC_SPI1_CLKSOURCE_PCLK2         ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI1SEL_Pos << 16U))                                                    /*!< PCLK2 clock used as SPI1 clock source */
#define LL_RCC_SPI1_CLKSOURCE_SYSCLK        ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI1SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_SPI1SEL_0 >> RCC_CCIPR1_SPI1SEL_Pos)) /*!< SYSCLK clock used as SPI1 clock source */
#define LL_RCC_SPI1_CLKSOURCE_HSI           ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI1SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_SPI1SEL_1 >> RCC_CCIPR1_SPI1SEL_Pos)) /*!< HSI clock used as SPI1 clock source */
#define LL_RCC_SPI1_CLKSOURCE_MSIK          ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI1SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_SPI1SEL >> RCC_CCIPR1_SPI1SEL_Pos))   /*!< MSIK clock used as SPI1 clock source */
#define LL_RCC_SPI2_CLKSOURCE_PCLK1         ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI2SEL_Pos << 16U))                                                    /*!< PCLK1 clock used as SPI2 clock source */
#define LL_RCC_SPI2_CLKSOURCE_SYSCLK        ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI2SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_SPI2SEL_0 >> RCC_CCIPR1_SPI2SEL_Pos)) /*!< SYSCLK clock used as SPI2 clock source */
#define LL_RCC_SPI2_CLKSOURCE_HSI           ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI2SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_SPI2SEL_1 >> RCC_CCIPR1_SPI2SEL_Pos)) /*!< HSI clock used as SPI2 clock source */
#define LL_RCC_SPI2_CLKSOURCE_MSIK          ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI2SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_SPI2SEL >> RCC_CCIPR1_SPI2SEL_Pos))  /*!< MSIK clock used as SPI2 clock source */
#define LL_RCC_SPI3_CLKSOURCE_PCLK3         ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_SPI3SEL_Pos << 16U))                                                    /*!< PCLK3 clock used as SPI3 clock source */
#define LL_RCC_SPI3_CLKSOURCE_SYSCLK        ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_SPI3SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_SPI3SEL_0 >> RCC_CCIPR3_SPI3SEL_Pos)) /*!< SYSCLK clock used as SPI3 clock source */
#define LL_RCC_SPI3_CLKSOURCE_HSI           ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_SPI3SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_SPI3SEL_1 >> RCC_CCIPR3_SPI3SEL_Pos)) /*!< HSI clock used as SPI3 clock source */
#define LL_RCC_SPI3_CLKSOURCE_MSIK          ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_SPI3SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_SPI3SEL >> RCC_CCIPR3_SPI3SEL_Pos))   /*!< MSIK clock used as SPI3 clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_LPTIM_CLKSOURCE  Peripheral LPTIMx clock source selection
  * @{
  */
#define LL_RCC_LPTIM1_CLKSOURCE_MSIK        ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM1SEL_Pos << 16U))                                                           /*!< MSIK clock used as LPTIM1 clock source */
#define LL_RCC_LPTIM1_CLKSOURCE_LSI         ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM1SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_LPTIM1SEL_0 >> RCC_CCIPR3_LPTIM1SEL_Pos))    /*!< LSI clock used as LPTIM1 clock source  */
#define LL_RCC_LPTIM1_CLKSOURCE_HSI         ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM1SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_LPTIM1SEL_1 >> RCC_CCIPR3_LPTIM1SEL_Pos))    /*!< HSI clock used as LPTIM1 clock source  */
#define LL_RCC_LPTIM1_CLKSOURCE_LSE         ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM1SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_LPTIM1SEL >> RCC_CCIPR3_LPTIM1SEL_Pos))      /*!< LSE clock used as LPTIM1 clock source  */
#define LL_RCC_LPTIM2_CLKSOURCE_PCLK1       ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_LPTIM2SEL_Pos << 16U))                                                           /*!< PCLK1 clock used as LPTIM2 clock source */
#define LL_RCC_LPTIM2_CLKSOURCE_LSI         ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_LPTIM2SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_LPTIM2SEL_0 >> RCC_CCIPR1_LPTIM2SEL_Pos))    /*!< LSI clock used as LPTIM2 clock source  */
#define LL_RCC_LPTIM2_CLKSOURCE_HSI         ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_LPTIM2SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_LPTIM2SEL_1 >> RCC_CCIPR1_LPTIM2SEL_Pos))    /*!< HSI clock used as LPTIM2 clock source  */
#define LL_RCC_LPTIM2_CLKSOURCE_LSE         ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_LPTIM2SEL_Pos << 16U) | \
                                             (RCC_CCIPR1_LPTIM2SEL >> RCC_CCIPR1_LPTIM2SEL_Pos))      /*!< LSE clock used as LPTIM2 clock source  */
#define LL_RCC_LPTIM34_CLKSOURCE_MSIK       ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM34SEL_Pos << 16U))                                                          /*!< MSIK clock used as LPTIM34 clock source*/
#define LL_RCC_LPTIM34_CLKSOURCE_LSI        ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM34SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_LPTIM34SEL_0 >> RCC_CCIPR3_LPTIM34SEL_Pos)) /*!< LSI clock used as LPTIM34 clock source */
#define LL_RCC_LPTIM34_CLKSOURCE_HSI        ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM34SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_LPTIM34SEL_1 >> RCC_CCIPR3_LPTIM34SEL_Pos)) /*!< HSI clock used as LPTIM34 clock source */
#define LL_RCC_LPTIM34_CLKSOURCE_LSE        ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM34SEL_Pos << 16U) | \
                                             (RCC_CCIPR3_LPTIM34SEL >> RCC_CCIPR3_LPTIM34SEL_Pos))   /*!< LSE clock used as LPTIM34 clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_FDCAN_CLKSOURCE  Peripheral FDCAN kernel clock source selection
  * @{
  */
#define LL_RCC_FDCAN_CLKSOURCE_HSE          0x00000000U           /*!< HSE clock used as FDCAN kernel clock source */
#define LL_RCC_FDCAN_CLKSOURCE_PLL1         RCC_CCIPR1_FDCANSEL_0 /*!< PLL1 Q clock used as FDCAN kernel clock source */
#define LL_RCC_FDCAN_CLKSOURCE_PLL2         RCC_CCIPR1_FDCANSEL_1 /*!< PLL2 P clock used as FDCAN kernel clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SAI_CLKSOURCE  Peripheral SAIx clock source selection
  * @{
  */
#define LL_RCC_SAI1_CLKSOURCE_PLL2          (RCC_CCIPR2_SAI1SEL << 16U)                          /*!< PLL2 clock used as SAI1 clock source */
#define LL_RCC_SAI1_CLKSOURCE_PLL3          ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_0) /*!< PLL3 clock used as SAI1 clock source */
#define LL_RCC_SAI1_CLKSOURCE_PLL1          ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_1) /*!< PLL1 clock used as SAI1 clock source */
#define LL_RCC_SAI1_CLKSOURCE_HSI           ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_2) /*!< HSI clock used as SAI1 clock source */
#define LL_RCC_SAI1_CLKSOURCE_PIN           ((RCC_CCIPR2_SAI1SEL << 16U) | (RCC_CCIPR2_SAI1SEL_1 | \
                                                                            RCC_CCIPR2_SAI1SEL_0))  /*!< External input clock used as SAI1 clock source */
#if defined(SAI2)
#define LL_RCC_SAI2_CLKSOURCE_PLL2          (RCC_CCIPR2_SAI2SEL << 16U)                          /*!< PLL2 clock used as SAI2 clock source */
#define LL_RCC_SAI2_CLKSOURCE_PLL3          ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_0) /*!< PLL3 clock used as SAI2 clock source */
#define LL_RCC_SAI2_CLKSOURCE_PLL1          ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_1) /*!< PLL1clock used as SAI2 clock source */
#define LL_RCC_SAI2_CLKSOURCE_HSI           ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_2) /*!< HSI clock used as SAI2 clock source */
#define LL_RCC_SAI2_CLKSOURCE_PIN           ((RCC_CCIPR2_SAI2SEL << 16U) | (RCC_CCIPR2_SAI2SEL_1 | \
                                                                            RCC_CCIPR2_SAI2SEL_0))  /*!< External input clock used as SAI2 clock source */
#endif /* SAI2 */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SDMMC_KERNELCLKSOURCE  Peripheral SDMMC1/2 kernel clock source selection
  * @{
  */
#define LL_RCC_SDMMC12_KERNELCLKSOURCE_48CLK  0x00000000U         /*!< 48MHz clock from internal multiplexor used as SDMMC1/2 clock source */
#define LL_RCC_SDMMC12_KERNELCLKSOURCE_PLL1   RCC_CCIPR2_SDMMCSEL /*!< PLL1 "P" used as SDMMC1/2 clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SDMMC12_CLKSOURCE  Peripheral SDMMC clock source selection
  * @{
  */
#define LL_RCC_SDMMC12_CLKSOURCE_HSI48      0x00000000U             /*!< HSI48 clock used as SDMMC1/2 clock source */
#define LL_RCC_SDMMC12_CLKSOURCE_PLL2       RCC_CCIPR1_ICLKSEL_0    /*!< PLL2 "Q" clock used as SDMMC1/2 clock source */
#define LL_RCC_SDMMC12_CLKSOURCE_PLL1       RCC_CCIPR1_ICLKSEL_1    /*!< PLL1 "Q" clock used as SDMMC1/2 clock source */
#define LL_RCC_SDMMC12_CLKSOURCE_MSIK       RCC_CCIPR1_ICLKSEL      /*!< MSIK clock used as SDMMC1/2 clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_RNG_CLKSOURCE  Peripheral RNG clock source selection
  * @{
  */
#define LL_RCC_RNG_CLKSOURCE_HSI48         0x00000000U            /*!< HSI48 clock used as RNG clock source */
#define LL_RCC_RNG_CLKSOURCE_HSI48_DIV2    RCC_CCIPR2_RNGSEL_0    /*!< HSI48/2 clock used as RNG clock source */
#define LL_RCC_RNG_CLKSOURCE_HSI           RCC_CCIPR2_RNGSEL_1    /*!< HSI clock used as RNG clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_USB_CLKSOURCE  Peripheral USB clock source selection
  * @{
  */
#define LL_RCC_USB_CLKSOURCE_HSI48         0x00000000U            /*!< HSI48 clock used as USB clock source */
#define LL_RCC_USB_CLKSOURCE_PLL2          RCC_CCIPR1_ICLKSEL_0   /*!< PLL2 "Q" clock used as USB clock source */
#define LL_RCC_USB_CLKSOURCE_PLL1          RCC_CCIPR1_ICLKSEL_1   /*!< PLL1 "Q" clock used as USB clock source */
#define LL_RCC_USB_CLKSOURCE_MSIK          RCC_CCIPR1_ICLKSEL     /*!< MSIK clock used as USB clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_ADCDAC_CLKSOURCE  Peripheral ADCx and DAC1 clock source selection
  * @{
  */
#define LL_RCC_ADCDAC_CLKSOURCE_HCLK       0x00000000U                                       /*!< No clock used as ADCx/DAC1 clock source */
#define LL_RCC_ADCDAC_CLKSOURCE_SYSCLK     RCC_CCIPR3_ADCDACSEL_0                            /*!< SYSCLK clock used as ADCx/DAC1 clock source */
#define LL_RCC_ADCDAC_CLKSOURCE_PLL2       RCC_CCIPR3_ADCDACSEL_1                            /*!< PLL2 clock used as ADCx/DAC1 clock source */
#define LL_RCC_ADCDAC_CLKSOURCE_HSI        RCC_CCIPR3_ADCDACSEL_2                            /*!< HSI clock used as ADCx/DAC1 clock source */
#define LL_RCC_ADCDAC_CLKSOURCE_HSE        (RCC_CCIPR3_ADCDACSEL_1 | RCC_CCIPR3_ADCDACSEL_0) /*!< HSE clock used as ADCx/DAC1 clock source */
#define LL_RCC_ADCDAC_CLKSOURCE_MSIK       (RCC_CCIPR3_ADCDACSEL_2 | RCC_CCIPR3_ADCDACSEL_0) /*!< MSIK clock used as ADCx/DAC1 clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_DAC1_CLKSOURCE  Peripheral DAC1 clock source selection
  * @{
  */
#define LL_RCC_DAC1_CLKSOURCE_LSE         0x00000000U                                   /*!< LSE clock used as DAC1 clock */
#define LL_RCC_DAC1_CLKSOURCE_LSI         RCC_CCIPR3_DAC1SEL                            /*!< LSI clock used as DAC1 clock */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_ADF1_CLKSOURCE  Peripheral ADF1 clock source selection
  * @{
  */
#define LL_RCC_ADF1_CLKSOURCE_HCLK        0x00000000U                                   /*!< HCLK clock used as ADF1 clock */
#define LL_RCC_ADF1_CLKSOURCE_PLL1        RCC_CCIPR3_ADF1SEL_0                          /*!< PLL1 clock used as ADF1 clock */
#define LL_RCC_ADF1_CLKSOURCE_PLL3        RCC_CCIPR3_ADF1SEL_1                          /*!< PLL3 clock used as ADF1 clock */
#define LL_RCC_ADF1_CLKSOURCE_MSIK        RCC_CCIPR3_ADF1SEL_2                          /*!< MSIK clock used as ADF1 clock */
#define LL_RCC_ADF1_CLKSOURCE_PIN         (RCC_CCIPR3_ADF1SEL_1 | RCC_CCIPR3_ADF1SEL_0) /*!< PIN SAI1_EXTCLK clock used as ADF1 clock */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MDF1_CLKSOURCE  Peripheral MDF1 clock source selection
  * @{
  */
#define LL_RCC_MDF1_CLKSOURCE_HCLK        0x00000000U                                   /*!< HCLK clock used as MDF1 clock */
#define LL_RCC_MDF1_CLKSOURCE_PLL1        RCC_CCIPR2_MDF1SEL_0                          /*!< PLL1 clock used as MDF1 clock */
#define LL_RCC_MDF1_CLKSOURCE_PLL3        RCC_CCIPR2_MDF1SEL_1                          /*!< PLL3 clock used as MDF1 clock */
#define LL_RCC_MDF1_CLKSOURCE_MSIK        RCC_CCIPR2_MDF1SEL_2                          /*!< MSIK clock used as MDF1 clock */
#define LL_RCC_MDF1_CLKSOURCE_PIN         (RCC_CCIPR2_MDF1SEL_1 | RCC_CCIPR2_MDF1SEL_0) /*!< PIN SAI1_EXTCLK clock used as MDF1 clock */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_OCTOSPI_CLKSOURCE  Peripheral OCTOSPI kernel clock source selection
  * @{
  */
#define LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK    0x00000000U                                        /*!< SYSCLK clock used as OctoSPI kernel clock source */
#define LL_RCC_OCTOSPI_CLKSOURCE_MSIK      RCC_CCIPR2_OCTOSPISEL_0                            /*!< MSIK clock used as OctoSPI kernel clock source */
#define LL_RCC_OCTOSPI_CLKSOURCE_PLL1      RCC_CCIPR2_OCTOSPISEL_1                            /*!< PLL1 "Q" clock used as OctoSPI kernel clock source */
#define LL_RCC_OCTOSPI_CLKSOURCE_PLL2      (RCC_CCIPR2_OCTOSPISEL_1|RCC_CCIPR2_OCTOSPISEL_0)  /*!< PLL2 "Q" clock used as OctoSPI kernel clock source */
/**
  * @}
  */

#if defined (HSPI1)
/** @defgroup RCC_LL_EC_HSPI1_CLKSOURCE  Peripheral HSPI1 kernel clock source selection
  * @{
  */
#define LL_RCC_HSPI_CLKSOURCE_SYSCLK     (0x00000000U)
#define LL_RCC_HSPI_CLKSOURCE_PLL1       RCC_CCIPR2_HSPISEL_0
#define LL_RCC_HSPI_CLKSOURCE_PLL2       RCC_CCIPR2_HSPISEL_1
#define LL_RCC_HSPI_CLKSOURCE_PLL3       RCC_CCIPR2_HSPISEL
/**
  * @}
  */
#endif /* HSPI1 */

/** @defgroup RCC_LL_EC_TIM_INPUT_CAPTURE_CLOCKSource TIM Input capture clock source selection
  * @{
  */
#define LL_RCC_TIMIC_CLKSOURCE_NONE                  0x00000000U                                                             /*!< No clock available for TIM16/TIM17 and LPTIM2 input capture */
#define LL_RCC_TIMIC_CLKSOURCE_HSI_DIV256            RCC_CCIPR1_TIMICSEL_2                                                   /*!< HSI/256 selected for TIM16/TIM17 and LPTIM2 input capture */
#define LL_RCC_TIMIC_CLKSOURCE_MSIS_DIV1024          RCC_CCIPR1_TIMICSEL_2                                                   /*!< MSIS/1024 selected for TIM16/TIM17 and LPTIM2 input capture */
#define LL_RCC_TIMIC_CLKSOURCE_MSIS_DIV4             (RCC_CCIPR1_TIMICSEL_2 | RCC_CCIPR1_TIMICSEL_1)                         /*!< MSIS/4 selected for TIM16/TIM17 and LPTIM2 input capture */
#define LL_RCC_TIMIC_CLKSOURCE_MSIK_DIV4             (RCC_CCIPR1_TIMICSEL_2 | RCC_CCIPR1_TIMICSEL_0)                         /*!< MSIK/4 selected for TIM16/TIM17 and LPTIM2 input capture */
#define LL_RCC_TIMIC_CLKSOURCE_MSIK_DIV1024          (RCC_CCIPR1_TIMICSEL_2 | RCC_CCIPR1_TIMICSEL_1 | \
                                                      RCC_CCIPR1_TIMICSEL_0) /*!< MSIK/1024 selected for TIM16/TIM17 and LPTIM2 input capture */
/**
  * @}
  */


#if defined(SAES)
/** @defgroup RCC_LL_EC_SAES_CLKSOURCE  Peripheral SAES clock source selection
  * @{
  */
#define LL_RCC_SAES_CLKSOURCE_SHSI          0x00000000U           /*!< SHSI clock used as SAES clock source */
#define LL_RCC_SAES_CLKSOURCE_SHSI_DIV2     RCC_CCIPR2_SAESSEL    /*!< SHSI_DIV2 clock used as SAES clock source */
/**
  * @}
  */
#endif /* SAES */

/** @defgroup RCC_LL_EC_USART Peripheral USARTx get clock source
  * @{
  */
#define LL_RCC_USART1_CLKSOURCE           ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_USART1SEL_Pos << 16U) | \
                                           (RCC_CCIPR1_USART1SEL >> RCC_CCIPR1_USART1SEL_Pos)) /*!< USART1 Clock source selection */
#if defined(USART2)
#define LL_RCC_USART2_CLKSOURCE           ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_USART2SEL_Pos << 16U) | \
                                           (RCC_CCIPR1_USART2SEL >> RCC_CCIPR1_USART2SEL_Pos)) /*!< USART2 Clock source selection */
#endif /* USART2 */
#define LL_RCC_USART3_CLKSOURCE           ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_USART3SEL_Pos << 16U) | \
                                           (RCC_CCIPR1_USART3SEL >> RCC_CCIPR1_USART3SEL_Pos)) /*!< USART3 Clock source selection */
#if defined (RCC_CCIPR2_USART6SEL)
#define LL_RCC_USART6_CLKSOURCE           ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_USART6SEL_Pos << 16U) | \
                                           (RCC_CCIPR2_USART6SEL >> RCC_CCIPR2_USART6SEL_Pos)) /*!< USART6 Clock source selection */
#endif /* RCC_CCIPR2_USART6SEL */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_UART Peripheral UARTx get clock source
  * @{
  */
#define LL_RCC_UART4_CLKSOURCE             RCC_CCIPR1_UART4SEL /*!< UART4 Clock source selection */
#define LL_RCC_UART5_CLKSOURCE             RCC_CCIPR1_UART5SEL /*!< UART5 Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SPI Peripheral SPIx get clock source
  * @{
  */
#define LL_RCC_SPI1_CLKSOURCE            ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI1SEL_Pos << 16U) | \
                                          (RCC_CCIPR1_SPI1SEL >> RCC_CCIPR1_SPI1SEL_Pos)) /*!< SPI1 Clock source selection */
#define LL_RCC_SPI2_CLKSOURCE            ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_SPI2SEL_Pos << 16U) | \
                                          (RCC_CCIPR1_SPI2SEL >> RCC_CCIPR1_SPI2SEL_Pos)) /*!< SPI2 Clock source selection */
#define LL_RCC_SPI3_CLKSOURCE            ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_SPI3SEL_Pos << 16U) | \
                                          (RCC_CCIPR3_SPI3SEL >> RCC_CCIPR3_SPI3SEL_Pos)) /*!< SPI3 Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_LPUART Peripheral LPUARTx get clock source
  * @{
  */
#define LL_RCC_LPUART1_CLKSOURCE          RCC_CCIPR3_LPUART1SEL /*!< LPUART1 Clock source selection */
/**
  * @}
  */

#if defined(DSI)
/** @defgroup RCC_LL_EC_DSI_CLKSOURCE  Peripheral DSI clock source selection
  * @{
  */
#define LL_RCC_DSI_CLKSOURCE_PHY              (RCC_CCIPR2_DSIHOSTSEL)
#define LL_RCC_DSI_CLKSOURCE_PLL3             (0x00000000U)
/**
  * @}
  */
#endif /* DSI */

#if defined(LTDC)
/** @defgroup RCC_LL_EC_LTDC_CLKSOURCE  Peripheral LTDC clock source selection
  * @{
  */
#define LL_RCC_LTDC_CLKSOURCE_PLL2              (RCC_CCIPR2_LTDCSEL)
#define LL_RCC_LTDC_CLKSOURCE_PLL3             (0x00000000U)
/**
  * @}
  */
#endif /* LTDC */

#if defined (RCC_CCIPR2_USBPHYCSEL)
/** @defgroup RCC_LL_EC_USBPHY_CLKSOURCE  Peripheral USBPHY clock source selection
  * @{
  */
#define LL_RCC_USBPHYCLKSOURCE_HSE                (0x00000000U)   /*!< HSE clock selected as USBPHYC clock */
#define LL_RCC_USBPHYCLKSOURCE_HSE_DIV2            RCC_CCIPR2_USBPHYCSEL_1      /*!< HSE clock divided by 2 selected as USBPHYC clock */
#define LL_RCC_USBPHYCLKSOURCE_PLL1                RCC_CCIPR2_USBPHYCSEL_0      /*!< PLL1 divider P selected as USBPHYC clock */
#define LL_RCC_USBPHYCLKSOURCE_PLL1_DIV2          (RCC_CCIPR2_USBPHYCSEL_1 | RCC_CCIPR2_USBPHYCSEL_0) /*!< PLL1 divider P divided by 2 selected as USBPHYC clock */
/**
  * @}
  */
#endif /* RCC_CCIPR2_USBPHYCSEL */

/** @defgroup RCC_LL_EC_I2C Peripheral I2Cx get clock source
  * @{
  */
#define LL_RCC_I2C1_CLKSOURCE             ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C1SEL_Pos << 16U) | \
                                           (RCC_CCIPR1_I2C1SEL >> RCC_CCIPR1_I2C1SEL_Pos)) /*!< I2C1 Clock source selection */
#define LL_RCC_I2C2_CLKSOURCE             ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C2SEL_Pos << 16U) | \
                                           (RCC_CCIPR1_I2C2SEL >> RCC_CCIPR1_I2C2SEL_Pos)) /*!< I2C2 Clock source selection */
#define LL_RCC_I2C3_CLKSOURCE             ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_I2C3SEL_Pos << 16U) | \
                                           (RCC_CCIPR3_I2C3SEL >> RCC_CCIPR3_I2C3SEL_Pos)) /*!< I2C3 Clock source selection */
#define LL_RCC_I2C4_CLKSOURCE             ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_I2C4SEL_Pos << 16U) | \
                                           (RCC_CCIPR1_I2C4SEL >> RCC_CCIPR1_I2C4SEL_Pos)) /*!< I2C4 Clock source selection */
#if defined (RCC_CCIPR2_I2C5SEL)
#define LL_RCC_I2C5_CLKSOURCE             ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C5SEL_Pos << 16U) | \
                                           (RCC_CCIPR2_I2C5SEL >> RCC_CCIPR2_I2C5SEL_Pos)) /*!< I2C1 Clock source selection */
#endif /* RCC_CCIPR2_I2C5SEL */
#if defined (RCC_CCIPR2_I2C6SEL)
#define LL_RCC_I2C6_CLKSOURCE             ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C6SEL_Pos << 16U) | \
                                           (RCC_CCIPR2_I2C6SEL >> RCC_CCIPR2_I2C6SEL_Pos)) /*!< I2C1 Clock source selection */
#endif /* RCC_CCIPR2_I2C6SEL */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_LPTIM Peripheral LPTIMx get clock source
  * @{
  */
#define LL_RCC_LPTIM1_CLKSOURCE           ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM1SEL_Pos << 16U) | \
                                           (RCC_CCIPR3_LPTIM1SEL >> RCC_CCIPR3_LPTIM1SEL_Pos)) /*!< LPTIM1 Clock source selection */
#define LL_RCC_LPTIM2_CLKSOURCE           ((RCC_OFFSET_CCIPR1 << 24U) | (RCC_CCIPR1_LPTIM2SEL_Pos << 16U) | \
                                           (RCC_CCIPR1_LPTIM2SEL >> RCC_CCIPR1_LPTIM2SEL_Pos)) /*!< LPTIM2 Clock source selection */
#define LL_RCC_LPTIM34_CLKSOURCE          ((RCC_OFFSET_CCIPR3 << 24U) | (RCC_CCIPR3_LPTIM34SEL_Pos << 16U) | \
                                           (RCC_CCIPR3_LPTIM34SEL >> RCC_CCIPR3_LPTIM34SEL_Pos)) /*!< LPTIM3 and LPTIM4 Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SAI  Peripheral SAIx get clock source
  * @{
  */
#define LL_RCC_SAI1_CLKSOURCE             RCC_CCIPR2_SAI1SEL /*!< SAI1 Clock source selection */
#if defined (SAI2)
#define LL_RCC_SAI2_CLKSOURCE             RCC_CCIPR2_SAI2SEL /*!< SAI2 Clock source selection */
#endif /* SAI2 */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SDMMC_KERNEL  Peripheral SDMMC get kernel clock source
  * @{
  */
#define LL_RCC_SDMMC_KERNELCLKSOURCE      RCC_CCIPR2_SDMMCSEL  /*!< SDMMC1/2 Kernel Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_SDMMC1/2  Peripheral SDMMC get clock source
  * @{
  */
#define LL_RCC_SDMMC_CLKSOURCE            RCC_CCIPR1_ICLKSEL /*!< SDMMC1/2 Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_RNG  Peripheral RNG get clock source
  * @{
  */
#define LL_RCC_RNG_CLKSOURCE              RCC_CCIPR2_RNGSEL    /*!< RNG Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_USB  Peripheral USB get clock source
  * @{
  */
#define LL_RCC_USB_CLKSOURCE              RCC_CCIPR1_ICLKSEL /*!< USB Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_ADCDAC  Peripheral ADCDAC get clock source
  * @{
  */
#define LL_RCC_ADCDAC_CLKSOURCE           RCC_CCIPR3_ADCDACSEL /*!< ADCDACs Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MDF1  Peripheral MDF1 get clock source
  * @{
  */
#define LL_RCC_MDF1_CLKSOURCE             RCC_CCIPR2_MDF1SEL /* MDF1 Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_DAC1  Peripheral DAC1 get clock source
  * @{
  */
#define LL_RCC_DAC1_CLKSOURCE             RCC_CCIPR3_DAC1SEL /* DAC1 Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_ADF1  Peripheral ADF1 get clock source
  * @{
  */
#define LL_RCC_ADF1_CLKSOURCE             RCC_CCIPR3_ADF1SEL  /*!< ADF1 Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_FDCAN Peripheral FDCAN get kernel clock source
  * @{
  */
#define LL_RCC_FDCAN_CLKSOURCE            RCC_CCIPR1_FDCANSEL     /*!< FDCAN Kernel Clock source selection */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_OCTOSPI  Peripheral OCTOSPI get clock source
  * @{
  */
#define LL_RCC_OCTOSPI_CLKSOURCE          RCC_CCIPR2_OCTOSPISEL    /*!< OctoSPI Clock source selection */
/**
  * @}
  */
#if defined (HSPI1)
/** @defgroup RCC_LL_EC_HSPI  Peripheral HSPI get clock source
  * @{
  */
#define LL_RCC_HSPI_CLKSOURCE          RCC_CCIPR2_HSPISEL    /*!< HSPI Clock source selection */
/**
  * @}
  */
#endif /* HSPI */

#if defined(SAES)
/** @defgroup RCC_LL_EC_SAES  Peripheral SAES get clock source
  * @{
  */
#define LL_RCC_SAES_CLKSOURCE             RCC_CCIPR2_SAESSEL  /*!< SAES Clock source selection */
/**
  * @}
  */
#endif /* SAES */

#if defined(DSI)
/** @defgroup RCC_LL_EC_DSI  Peripheral DSI get clock source
  * @{
  */
#define LL_RCC_DSI_CLKSOURCE             RCC_CCIPR2_DSIHOSTSEL
/**
  * @}
  */
#endif /* DSI */

#if defined(LTDC)
/** @defgroup RCC_LL_EC_LTDC  Peripheral LTDC get clock source
  * @{
  */
#define LL_RCC_LTDC_CLKSOURCE             RCC_CCIPR2_LTDCSEL
/**
  * @}
  */
#endif /* LTDC */

#if defined (RCC_CCIPR2_USBPHYCSEL)
/** @defgroup RCC_LL_EC_USBPHY  Peripheral USBPHY get clock source
  * @{
  */
#define LL_RCC_USBPHY_CLKSOURCE               RCC_CCIPR2_USBPHYCSEL
/**
  * @}
  */
#endif /* RCC_CCIPR2_USBPHYCSEL */

/** @defgroup RCC_LL_EC_PLL1SOURCE  PLL1 entry clock source
  * @{
  */
#define LL_RCC_PLL1SOURCE_NONE             0x00000000U                                       /*!< No clock selected as main PLL1 entry clock source */
#define LL_RCC_PLL1SOURCE_MSIS             RCC_PLL1CFGR_PLL1SRC_0                            /*!< MSIS clock selected as main PLL1 entry clock source */
#define LL_RCC_PLL1SOURCE_HSI              RCC_PLL1CFGR_PLL1SRC_1                            /*!< HSI clock selected as main PLL1 entry clock source */
#define LL_RCC_PLL1SOURCE_HSE              (RCC_PLL1CFGR_PLL1SRC_0 | RCC_PLL1CFGR_PLL1SRC_1) /*!< HSE clock selected as main PLL1 entry clock source */

#define LL_RCC_PLLSOURCE_NONE              LL_RCC_PLL1SOURCE_NONE                            /*!< alias define for compatibility with legacy code */
#define LL_RCC_PLLSOURCE_MSIS              LL_RCC_PLL1SOURCE_MSIS                            /*!< alias define for compatibility with legacy code */
#define LL_RCC_PLLSOURCE_HSI               LL_RCC_PLL1SOURCE_HSI                             /*!< alias define for compatibility with legacy code */
#define LL_RCC_PLLSOURCE_HSE               LL_RCC_PLL1SOURCE_HSE                             /*!< alias define for compatibility with legacy code */

/**
  * @}
  */

/** @defgroup RCC_LL_EC_PLLINPUTRANGE   All PLLs input ranges
  * @{
  */
#define LL_RCC_PLLINPUTRANGE_4_8           0x00000000U                                       /*!< VCO input range: 4 to 8 MHz  */
#define LL_RCC_PLLINPUTRANGE_8_16          RCC_PLL1CFGR_PLL1RGE                              /*!< VCO input range: 8 to 16 MHz */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_PLL2SOURCE  PLL2 entry clock source
  * @{
  */
#define LL_RCC_PLL2SOURCE_NONE             0x00000000U                                       /*!< No clock selected as main PLL2 entry clock source */
#define LL_RCC_PLL2SOURCE_MSIS             RCC_PLL2CFGR_PLL2SRC_0                            /*!< MSIS clock selected as main PLL2 entry clock source */
#define LL_RCC_PLL2SOURCE_HSI              RCC_PLL2CFGR_PLL2SRC_1                            /*!< HSI clock selected as main PLL2 entry clock source */
#define LL_RCC_PLL2SOURCE_HSE              (RCC_PLL2CFGR_PLL2SRC_0 | RCC_PLL2CFGR_PLL2SRC_1) /*!< HSE clock selected as main PLL2 entry clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_PLL3SOURCE  PLL3 entry clock source
  * @{
  */
#define LL_RCC_PLL3SOURCE_NONE             0x00000000U                                       /*!< No clock selected as main PLL3 entry clock source */
#define LL_RCC_PLL3SOURCE_MSIS             RCC_PLL3CFGR_PLL3SRC_0                            /*!< MSIS clock selected as main PLL3 entry clock source */
#define LL_RCC_PLL3SOURCE_HSI              RCC_PLL3CFGR_PLL3SRC_1                            /*!< HSI clock selected as main PLL3 entry clock source */
#define LL_RCC_PLL3SOURCE_HSE              (RCC_PLL3CFGR_PLL3SRC_0 | RCC_PLL3CFGR_PLL3SRC_1) /*!< HSE clock selected as main PLL3 entry clock source */
/**
  * @}
  */

/** @defgroup RCC_LL_EC_MSIRANGESEL  MSI clock range selection
  * @{
  */
#define LL_RCC_MSIRANGESEL_STANDBY         0U                  /*!< MSI Range is provided by MSISRANGE */
#define LL_RCC_MSIRANGESEL_RUN             1U                  /*!< MSI Range is provided by MSISRANGE */
/**
  * @}
  */

/** @defgroup RCC_LL_EF_Security_Services Security Services
  * @note Only available when system implements security (TZEN=1)
  * @{
  */
#define LL_RCC_ALL_NSEC                    0U                      /*!< No security on RCC resources (default) */
#define LL_RCC_ALL_SEC                     RCC_SECURE_MASK         /*!< Security on all RCC resources          */

#define LL_RCC_HSI_SEC                     RCC_SECCFGR_HSISEC      /*!< HSI clock configuration security */
#define LL_RCC_HSI_NSEC                    0U                      /*!< HSI clock configuration secure/non-secure access */
#define LL_RCC_HSE_SEC                     RCC_SECCFGR_HSESEC      /*!< HSE clock configuration security */
#define LL_RCC_HSE_NSEC                    0U                      /*!< HSE clock configuration secure/non-secure access */
#define LL_RCC_MSI_SEC                     RCC_SECCFGR_MSISEC      /*!< MSI clock configuration security */
#define LL_RCC_MSI_NSEC                    0U                      /*!< MSI clock configuration secure/non-secure access */
#define LL_RCC_LSE_SEC                     RCC_SECCFGR_LSESEC      /*!< LSE clock configuration security */
#define LL_RCC_LSE_NSEC                    0U                      /*!< LSE clock configuration secure/non-secure access */
#define LL_RCC_LSI_SEC                     RCC_SECCFGR_LSISEC      /*!< LSI clock configuration security */
#define LL_RCC_LSI_NSEC                    0U                      /*!< LSI clock configuration secure/non-secure access */
#define LL_RCC_SYSCLK_SEC                  RCC_SECCFGR_SYSCLKSEC   /*!< SYSCLK clock; STOPWUCK and MCO output configuration security */
#define LL_RCC_SYSCLK_NSEC                 0U                      /*!< SYSCLK clock; STOPWUCK and MCO output configuration secure/non-secure access */
#define LL_RCC_PRESCALERS_SEC              RCC_SECCFGR_PRESCSEC    /*!< AHBx/APBx prescaler configuration security */
#define LL_RCC_PRESCALERS_NSEC             0U                      /*!< AHBx/APBx prescaler configuration secure/non-secure access */
#define LL_RCC_PLL1_SEC                    RCC_SECCFGR_PLL1SEC     /*!< PLL1 clock configuration security */
#define LL_RCC_PLL1_NSEC                   0U                      /*!< main PLL1 clock configuration secure/non-secure access */
#define LL_RCC_PLL2_SEC                    RCC_SECCFGR_PLL2SEC     /*!< PLL2 clock configuration security */
#define LL_RCC_PLL2_NSEC                   0U                      /*!< main PLL2 clock configuration secure/non-secure access */
#define LL_RCC_PLL3_SEC                    RCC_SECCFGR_PLL3SEC     /*!< PLL3 clock configuration security */
#define LL_RCC_PLL3_NSEC                   0U                      /*!< main PLL3 clock configuration secure/non-secure access */
#define LL_RCC_ICLK_SEC                    RCC_SECCFGR_ICLKSEC     /*!< ICLK clock source selection security */
#define LL_RCC_ICLK_NSEC                   0U                      /*!< ICLK clock source selection secure/non-secure access */
#define LL_RCC_HSI48_SEC                   RCC_SECCFGR_HSI48SEC    /*!< HSI48 clock configuration security */
#define LL_RCC_HSI48_NSEC                  0U                      /*!< HSI48 clock configuration secure/non-secure access */
#define LL_RCC_RESET_FLAGS_SEC             RCC_SECCFGR_RMVFSEC     /*!< Remove reset flag security */
#define LL_RCC_RESET_FLAGS_NSEC            0U

#define LL_RCC_PLL_SEC                     LL_RCC_PLL1_NSEC        /*!< alias define for compatibility with legacy code */
#define LL_RCC_PLL_NSEC                    LL_RCC_PLL1_NSEC        /*!< alias define for compatibility with legacy code */
#define LL_RCC_CLK48M_SEC                  LL_RCC_ICLK_SEC         /*!< alias define for compatibility with legacy code */
#define LL_RCC_CLK48M_NSEC                 LL_RCC_ICLK_NSEC        /*!< alias define for compatibility with legacy code */
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/
/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros
  * @{
  */

/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros
  * @{
  */

/**
  * @brief  Write a value in RCC register
  * @param  __REG__ Register to be written
  * @param  __VALUE__ Value to be written in the register
  * @retval None
  */
#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__))

/**
  * @brief  Read a value in RCC register
  * @param  __REG__ Register to be read
  * @retval Register value
  */
#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__)
/**
  * @}
  */

/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies
  * @{
  */

/**
  * @brief  Helper macro to calculate the PLL1CLK frequency on system domain
  * @note ex: @ref __LL_RCC_CALC_PLL1CLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL1_GetDivider (),
  *             @ref LL_RCC_PLL1_GetN (), @ref LL_RCC_PLL1_GetR ());
  * @param __INPUTFREQ__ PLL1 Input frequency (based on MSI/HSE/HSI)
  * @param __PLL1M__ parameter can be a value between 1 and 16
  * @param __PLL1N__ parameter can be a value between 4 and 512
  * @param __PLL1R__ parameter can be a value between 1 and 128 (Only division by 1 and even division are allowed)
  * @retval PLL1 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PLL1CLK_FREQ(__INPUTFREQ__, __PLL1M__, __PLL1N__, __PLL1R__) ((((__INPUTFREQ__) /(__PLL1M__)) * \
    (__PLL1N__)) / (__PLL1R__))
#define __LL_RCC_CALC_PLLCLK_FREQ     __LL_RCC_CALC_PLL1CLK_FREQ    /*!< alias for compatibility with legacy code */

/**
  * @brief  Helper macro to calculate the PLL1CLK frequency used on SAI domain
  * @note ex: @ref __LL_RCC_CALC_PLL1CLK_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL1_GetDivider (),
  *             @ref LL_RCC_PLL1_GetN (), @ref LL_RCC_PLL1_GetP ());
  * @param __INPUTFREQ__ PLL1 Input frequency (based on MSI/HSE/HSI)
  * @param __PLL1M__ parameter can be a value between 1 and 16
  * @param __PLL1N__ parameter can be a value between 4 and 512
  * @param __PLL1P__ parameter can be a value between 1 and 128
  * @retval PLL1 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PLL1CLK_SAI_FREQ(__INPUTFREQ__, __PLL1M__, __PLL1N__, __PLL1P__) ((((__INPUTFREQ__) \
    /(__PLL1M__)) * (__PLL1N__)) / (__PLL1P__))
#define __LL_RCC_CALC_PLLCLK_SAI_FREQ     __LL_RCC_CALC_PLL1CLK_SAI_FREQ    /*!< alias for compatibility with legacy code */

/**
  * @brief  Helper macro to calculate the PLL1CLK frequency used on 48M domain
  * @note ex: @ref __LL_RCC_CALC_PLL1CLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL1_GetDivider (),
  *             @ref LL_RCC_PLL1_GetN (), @ref LL_RCC_PLL1_GetQ ());
  * @param __INPUTFREQ__ PLL1 Input frequency (based on MSI/HSE/HSI)
  * @param __PLL1M__ parameter can be a value between 1 and 16
  * @param __PLL1N__ parameter can be a value between 4 and 512
  * @param __PLL1Q__ parameter can be a value between 1 and 128
  * @retval PLL clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PLL1CLK_48M_FREQ(__INPUTFREQ__, __PLL1M__, __PLL1N__, __PLL1Q__) ((((__INPUTFREQ__) \
    /(__PLL1M__)) * (__PLL1N__)) / (__PLL1Q__))
#define __LL_RCC_CALC_PLLCLK_48M_FREQ     __LL_RCC_CALC_PLL1CLK_48M_FREQ    /*!< alias for compatibility with legacy code */

/**
  * @brief  Helper macro to calculate the PLL2 frequency used for SAI domain
  * @note ex: @ref __LL_RCC_CALC_PLL2CLK_SAI_FREQ (HSE_ALUE,@ref LL_RCC_PLL2_GetDivider (),
  *             @ref LL_RCC_PLL2_GetN (), @ref LL_RCC_PLL2_GetP ());
  * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
  * @param __PLL2M__ parameter can be a value between 1 and 16
  * @param __PLL2N__ parameter can be a value between 4 and 512
  * @param __PLL2P__ parameter can be a value between 1 and 128
  * @retval PLL2 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PLL2CLK_SAI_FREQ(__INPUTFREQ__, __PLL2M__, __PLL2N__, __PLL2P__) ((((__INPUTFREQ__) \
    /(__PLL2M__)) * (__PLL2N__)) / (__PLL2P__))

/**
  * @brief  Helper macro to calculate the PLL2 frequency used on 48M domain
  * @note ex: @ref __LL_RCC_CALC_PLL2CLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL2_GetDivider (),
  *             @ref LL_RCC_PLL2_GetN (), @ref LL_RCC_PLL2_GetQ ());
  * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
  * @param __PLL2M__ parameter can be a value between 1 and 16
  * @param __PLL2N__ parameter can be a value between 4 and 512
  * @param __PLL2Q__ parameter can be a value between 1 and 128
  * @retval PLL2 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PLL2CLK_48M_FREQ(__INPUTFREQ__, __PLL2M__, __PLL2N__, __PLL2Q__) ((((__INPUTFREQ__) \
    /(__PLL2M__)) * (__PLL2N__)) / (__PLL2Q__))

/**
  * @brief  Helper macro to calculate the PLL2 frequency used on ADC domain
  * @note ex: @ref __LL_RCC_CALC_PLL2CLK_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL2_GetDivider (),
  *             @ref LL_RCC_PLL2_GetN (), @ref LL_RCC_PLL2_GetR ());
  * @param __INPUTFREQ__ PLL2 Input frequency (based on MSI/HSE/HSI)
  * @param __PLL2M__ parameter can be a value between 1 and 16
  * @param __PLL2N__ parameter can be a value between 4 and 512
  * @param __PLL2R__ parameter can be a value between 1 and 128
  * @retval PLL2 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PLL2CLK_ADC_FREQ(__INPUTFREQ__, __PLL2M__, __PLL2N__, __PLL2R__) ((((__INPUTFREQ__) \
    /(__PLL2M__)) * (__PLL2N__)) / (__PLL2R__))

/**
  * @brief  Helper macro to calculate the PLL3 frequency used for SAI domain
  * @note ex: @ref __LL_RCC_CALC_PLL3CLK_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL3_GetDivider (),
  *             @ref LL_RCC_PLL3_GetN (), @ref LL_RCC_PLL3_GetP ());
  * @param __INPUTFREQ__ PLL3 Input frequency (based on MSI/HSE/HSI)
  * @param __PLL3M__ parameter can be a value between 1 and 16
  * @param __PLL3N__ parameter can be a value between 4 and 512
  * @param __PLL3P__ parameter can be a value between 1 and 128
  * @retval PLL3 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PLL3CLK_SAI_FREQ(__INPUTFREQ__, __PLL3M__, __PLL3N__, __PLL3P__)((((__INPUTFREQ__) \
    /(__PLL3M__)) * (__PLL3N__)) / (__PLL3P__))

/**
  * @brief  Helper macro to calculate the PLL2 frequency used on 48M domain
  * @note ex: @ref __LL_RCC_CALC_PLL3CLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL3_GetDivider (),
  *             @ref LL_RCC_PLL3_GetN (), @ref LL_RCC_PLL3_GetQ ());
  * @param __INPUTFREQ__ PLL3 Input frequency (based on MSI/HSE/HSI)
  * @param __PLL3M__ parameter can be a value between 1 and 16
  * @param __PLL3N__ parameter can be a value between 4 and 512
  * @param __PLL3Q__ parameter can be a value between 1 and 128
  * @retval PLL3 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PLL3CLK_48M_FREQ(__INPUTFREQ__, __PLL3M__, __PLL3N__, __PLL3Q__) ((((__INPUTFREQ__) \
    /(__PLL3M__)) * (__PLL3N__)) / (__PLL3Q__))

#if defined(HSPI1) || defined(LTDC)
/**
  * @brief  Helper macro to calculate the PLL3 frequency used on HSPI domain
  * @note ex: @ref __LL_RCC_CALC_PLL3CLK_HSPI_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLL3_GetDivider (),
  *             @ref LL_RCC_PLL3_GetN (), @ref LL_RCC_PLL3_GetQ ());
  * @param __INPUTFREQ__ PLL3 Input frequency (based on MSI/HSE/HSI)
  * @param __PLL3M__ parameter can be a value between 1 and 16
  * @param __PLL3N__ parameter can be a value between 4 and 512
  * @param __PLL3R__ parameter can be a value between 1 and 128
  * @retval PLL3 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PLL3CLK_HSPI_LTDC_FREQ(__INPUTFREQ__, __PLL3M__, __PLL3N__, __PLL3R__) ((((__INPUTFREQ__) \
    /(__PLL3M__)) * (__PLL3N__)) / (__PLL3R__))
/* Legacy define */
#define __LL_RCC_CALC_PLL3CLK_HSPI_FREQ    __LL_RCC_CALC_PLL3CLK_HSPI_LTDC_FREQ
#endif /* HSPI1 || LTDC */

/**
  * @brief  Helper macro to calculate the HCLK frequency
  * @param  __SYSCLKFREQ__ SYSCLK frequency (based on MSI/HSE/HSI/PLLCLK)
  * @param  __AHBPRESCALER__ This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SYSCLK_DIV_1
  *         @arg @ref LL_RCC_SYSCLK_DIV_2
  *         @arg @ref LL_RCC_SYSCLK_DIV_4
  *         @arg @ref LL_RCC_SYSCLK_DIV_8
  *         @arg @ref LL_RCC_SYSCLK_DIV_16
  *         @arg @ref LL_RCC_SYSCLK_DIV_64
  *         @arg @ref LL_RCC_SYSCLK_DIV_128
  *         @arg @ref LL_RCC_SYSCLK_DIV_256
  *         @arg @ref LL_RCC_SYSCLK_DIV_512
  * @retval HCLK clock frequency (in Hz)
  */
#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> \
                                                                   AHBPrescTable[((__AHBPRESCALER__)& RCC_CFGR2_HPRE) \
                                                                       >>  RCC_CFGR2_HPRE_Pos])

/**
  * @brief  Helper macro to calculate the PCLK1 frequency (ABP1)
  * @param  __HCLKFREQ__ HCLK frequency
  * @param  __APB1PRESCALER__ This parameter can be one of the following values:
  *         @arg @ref LL_RCC_APB1_DIV_1
  *         @arg @ref LL_RCC_APB1_DIV_2
  *         @arg @ref LL_RCC_APB1_DIV_4
  *         @arg @ref LL_RCC_APB1_DIV_8
  *         @arg @ref LL_RCC_APB1_DIV_16
  * @retval PCLK1 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> \
                                                                   (APBPrescTable[((__APB1PRESCALER__)& \
                                                                       RCC_CFGR2_PPRE1) >>  RCC_CFGR2_PPRE1_Pos]))

/**
  * @brief  Helper macro to calculate the PCLK2 frequency (ABP2)
  * @param  __HCLKFREQ__ HCLK frequency
  * @param  __APB2PRESCALER__ This parameter can be one of the following values:
  *         @arg @ref LL_RCC_APB2_DIV_1
  *         @arg @ref LL_RCC_APB2_DIV_2
  *         @arg @ref LL_RCC_APB2_DIV_4
  *         @arg @ref LL_RCC_APB2_DIV_8
  *         @arg @ref LL_RCC_APB2_DIV_16
  * @retval PCLK2 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >>\
                                                                   APBPrescTable[(__APB2PRESCALER__) >> \
                                                                       RCC_CFGR2_PPRE2_Pos])

/**
  * @brief  Helper macro to calculate the PCLK3 frequency (ABP3)
  * @param  __HCLKFREQ__ HCLK frequency
  * @param  __APB3PRESCALER__ This parameter can be one of the following values:
  *         @arg @ref LL_RCC_APB3_DIV_1
  *         @arg @ref LL_RCC_APB3_DIV_2
  *         @arg @ref LL_RCC_APB3_DIV_4
  *         @arg @ref LL_RCC_APB3_DIV_8
  *         @arg @ref LL_RCC_APB3_DIV_16
  * @retval PCLK3 clock frequency (in Hz)
  */
#define __LL_RCC_CALC_PCLK3_FREQ(__HCLKFREQ__, __APB3PRESCALER__) ((__HCLKFREQ__) >> \
                                                                   APBPrescTable[(__APB3PRESCALER__) >> \
                                                                       RCC_CFGR3_PPRE3_Pos])

/**
  * @brief  Helper macro to calculate the MSIS frequency (in Hz)
  * @note __MSISSEL__ can be retrieved thanks to function LL_RCC_MSI_IsEnabledRangeSelect()
  * @note if __MSISSEL__ is equal to LL_RCC_MSIRANGESEL_STANDBY,
  *        __MSISRANGE__can be retrieved by LL_RCC_MSI_GetRangeAfterStandby()
  *        else by LL_RCC_MSI_GetRange()
  *        ex: __LL_RCC_CALC_MSIS_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
  *              (LL_RCC_MSI_IsEnabledRangeSelect()?
  *               LL_RCC_MSI_GetRange():
  *               LL_RCC_MSI_GetRangeAfterStandby()))
  * @param  __MSISSEL__ This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSIRANGESEL_STANDBY
  *         @arg @ref LL_RCC_MSIRANGESEL_RUN
  * @param  __MSISRANGE__ This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSISRANGE_0
  *         @arg @ref LL_RCC_MSISRANGE_1
  *         @arg @ref LL_RCC_MSISRANGE_2
  *         @arg @ref LL_RCC_MSISRANGE_3
  *         @arg @ref LL_RCC_MSISRANGE_4
  *         @arg @ref LL_RCC_MSISRANGE_5
  *         @arg @ref LL_RCC_MSISRANGE_6
  *         @arg @ref LL_RCC_MSISRANGE_7
  *         @arg @ref LL_RCC_MSISRANGE_8
  *         @arg @ref LL_RCC_MSISRANGE_9
  *         @arg @ref LL_RCC_MSISRANGE_10
  *         @arg @ref LL_RCC_MSISRANGE_11
  *         @arg @ref LL_RCC_MSISRANGE_12
  *         @arg @ref LL_RCC_MSISRANGE_13
  *         @arg @ref LL_RCC_MSISRANGE_14
  *         @arg @ref LL_RCC_MSISRANGE_15
  * @retval MSI clock frequency (in Hz)
  */
#define __LL_RCC_CALC_MSIS_FREQ(__MSISSEL__, __MSISRANGE__)   (((__MSISSEL__) == LL_RCC_MSIRANGESEL_RUN) ? \
                                                               (MSIRangeTable[((__MSISRANGE__) >> 28U) & 0x0FU]) : \
                                                               (MSIRangeTable[((__MSISRANGE__) >> 12U) & 0x0FU]))


/**
  * @brief  Helper macro to calculate the MSIK frequency (in Hz)
  * @note __MSIKSEL__ can be retrieved thanks to function LL_RCC_MSIK_IsEnabledRangeSelect()
  * @note if __MSIKSEL__ is equal to LL_RCC_MSIKRANGESEL_STANDBY,
  *        __MSIKRANGE__can be retrieved by LL_RCC_MSIK_GetRangeAfterStandby()
  *        else by LL_RCC_MSIK_GetRange()
  *        ex: __LL_RCC_CALC_MSIK_FREQ(LL_RCC_MSIK_IsEnabledRangeSelect(),
  *              (LL_RCC_MSIK_IsEnabledRangeSelect()?
  *               LL_RCC_MSIK_GetRange():
  *               LL_RCC_MSIK_GetRangeAfterStandby()))
  * @param  __MSIKSEL__ This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSIRANGESEL_STANDBY
  *         @arg @ref LL_RCC_MSIRANGESEL_RUN
  * @param  __MSIKRANGE__ This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSIKRANGE_0
  *         @arg @ref LL_RCC_MSIKRANGE_1
  *         @arg @ref LL_RCC_MSIKRANGE_2
  *         @arg @ref LL_RCC_MSIKRANGE_3
  *         @arg @ref LL_RCC_MSIKRANGE_4
  *         @arg @ref LL_RCC_MSIKRANGE_5
  *         @arg @ref LL_RCC_MSIKRANGE_6
  *         @arg @ref LL_RCC_MSIKRANGE_7
  *         @arg @ref LL_RCC_MSIKRANGE_8
  *         @arg @ref LL_RCC_MSIKRANGE_9
  *         @arg @ref LL_RCC_MSIKRANGE_10
  *         @arg @ref LL_RCC_MSIKRANGE_11
  *         @arg @ref LL_RCC_MSIKRANGE_12
  *         @arg @ref LL_RCC_MSIKRANGE_13
  *         @arg @ref LL_RCC_MSIKRANGE_14
  *         @arg @ref LL_RCC_MSIKRANGE_15
  * @retval MSIK clock frequency (in Hz)
  */
#define __LL_RCC_CALC_MSIK_FREQ(__MSIKSEL__, __MSIKRANGE__)   (((__MSIKSEL__) == LL_RCC_MSIRANGESEL_RUN) ? \
                                                               (MSIRangeTable[((__MSIKRANGE__) >> 24U) & 0x0FU]) : \
                                                               (MSIRangeTable[((__MSIKRANGE__) >> 8U) & 0x0FU]))
/**
  * @}
  */

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions
  * @{
  */

/** @defgroup RCC_LL_EF_HSE HSE
  * @{
  */

/**
  * @brief  Enable the Clock Security System.
  * @rmtoll CR           CSSON         LL_RCC_HSE_EnableCSS
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void)
{
  SET_BIT(RCC->CR, RCC_CR_CSSON);
}

/**
  * @brief  Enable HSE external oscillator (HSE Bypass)
  * @rmtoll CR           HSEBYP        LL_RCC_HSE_EnableBypass
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void)
{
  SET_BIT(RCC->CR, RCC_CR_HSEBYP);
}

/**
  * @brief  Disable HSE external oscillator (HSE Bypass)
  * @rmtoll CR           HSEBYP        LL_RCC_HSE_DisableBypass
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
}

/**
  * @brief  Enable HSE crystal oscillator (HSE ON)
  * @rmtoll CR           HSEON         LL_RCC_HSE_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSE_Enable(void)
{
  SET_BIT(RCC->CR, RCC_CR_HSEON);
}

/**
  * @brief  Disable HSE crystal oscillator (HSE ON)
  * @rmtoll CR           HSEON         LL_RCC_HSE_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSE_Disable(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_HSEON);
}

/**
  * @brief  Check if HSE oscillator Ready
  * @rmtoll CR           HSERDY        LL_RCC_HSE_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == RCC_CR_HSERDY) ? 1UL : 0UL);
}

/**
  * @brief  Set external HSE clock mode
  * @note This bit can be written only if the HSE oscillator is disabled
  * @rmtoll CR         HSEEXT        LL_RCC_HSE_SetClockMode
  * @param  HSEMode This parameter can be one of the following values:
  *         @arg @ref LL_RCC_HSE_ANALOG_MODE
  *         @arg @ref LL_RCC_HSE_DIGITAL_MODE
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSE_SetClockMode(uint32_t HSEMode)
{
  MODIFY_REG(RCC->CR, RCC_CR_HSEEXT, HSEMode);
}

/**
  * @brief  Get External HSE clock mode
  * @rmtoll CR         HSEEXT        LL_RCC_HSE_GetClockMode
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_HSE_ANALOG_MODE
  *         @arg @ref LL_RCC_HSE_DIGITAL_MODE
  */
__STATIC_INLINE uint32_t LL_RCC_HSE_GetClockMode(void)
{
  return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSEEXT));
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_HSI HSI
  * @{
  */

/**
  * @brief  Enable HSI even in stop mode
  * @note HSI oscillator is forced ON even in Stop mode
  * @rmtoll CR           HSIKERON      LL_RCC_HSI_EnableInStopMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSI_EnableInStopMode(void)
{
  SET_BIT(RCC->CR, RCC_CR_HSIKERON);
}

/**
  * @brief  Disable HSI in stop mode
  * @rmtoll CR           HSIKERON      LL_RCC_HSI_DisableInStopMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSI_DisableInStopMode(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON);
}

/**
  * @brief  Check if HSI is enabled in stop mode
  * @rmtoll CR           HSIKERON        LL_RCC_HSI_IsEnabledInStopMode
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_HSI_IsEnabledInStopMode(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_HSIKERON) == RCC_CR_HSIKERON) ? 1UL : 0UL);
}

/**
  * @brief  Enable HSI oscillator
  * @rmtoll CR           HSION         LL_RCC_HSI_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSI_Enable(void)
{
  SET_BIT(RCC->CR, RCC_CR_HSION);
}

/**
  * @brief  Disable HSI oscillator
  * @rmtoll CR           HSION         LL_RCC_HSI_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSI_Disable(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_HSION);
}

/**
  * @brief  Check if HSI clock is ready
  * @rmtoll CR           HSIRDY        LL_RCC_HSI_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RCC_CR_HSIRDY) ? 1UL : 0UL);
}

/**
  * @brief  Get HSI Calibration value
  * @note When HSITRIM is written, HSICAL is updated with the sum of
  *       HSITRIM and the factory trim value
  * @rmtoll ICSCR3       HSICAL        LL_RCC_HSI_GetCalibration
  * @retval Between Min_Data = 0 and Max_Data = 127
  */
__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void)
{
  return (uint32_t)(READ_BIT(RCC->ICSCR3, RCC_ICSCR3_HSICAL) >> RCC_ICSCR3_HSICAL_Pos);
}

/**
  * @brief  Set HSI Calibration trimming
  * @note user-programmable trimming value that is added to the HSICAL
  * @note Default value is 64, which, when added to the HSICAL value,
  *       should trim the HSI to 16 MHz +/- 1 %
  * @rmtoll ICSCR3        HSITRIM       LL_RCC_HSI_SetCalibTrimming
  * @param  Value Between Min_Data = 0 and Max_Data = 127
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value)
{
  MODIFY_REG(RCC->ICSCR3, RCC_ICSCR3_HSITRIM, Value << RCC_ICSCR3_HSITRIM_Pos);
}

/**
  * @brief  Get HSI Calibration trimming
  * @rmtoll ICSC3R        HSITRIM       LL_RCC_HSI_GetCalibTrimming
  * @retval Between Min_Data = 0 and Max_Data = 127
  */
__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void)
{
  return (uint32_t)(READ_BIT(RCC->ICSCR3, RCC_ICSCR3_HSITRIM) >> RCC_ICSCR3_HSITRIM_Pos);
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_HSI48 HSI48
  * @{
  */

/**
  * @brief  Enable HSI48
  * @rmtoll CR          HSI48ON       LL_RCC_HSI48_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSI48_Enable(void)
{
  SET_BIT(RCC->CR, RCC_CR_HSI48ON);
}

/**
  * @brief  Disable HSI48
  * @rmtoll CR          HSI48ON       LL_RCC_HSI48_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_HSI48_Disable(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON);
}

/**
  * @brief  Check if HSI48 oscillator Ready
  * @rmtoll CR          HSI48RDY      LL_RCC_HSI48_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == RCC_CR_HSI48RDY) ? 1UL : 0UL);
}

/**
  * @brief  Get HSI48 Calibration value
  * @rmtoll CRRCR          HSI48CAL      LL_RCC_HSI48_GetCalibration
  * @retval Between Min_Data = 0x00 and Max_Data = 0x1FF
  */
__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void)
{
  return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos);
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_LSE LSE
  * @{
  */

/**
  * @brief  Enable  Low Speed External (LSE) crystal.
  * @rmtoll BDCR         LSEON         LL_RCC_LSE_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_Enable(void)
{
  SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);
}

/**
  * @brief  Disable  Low Speed External (LSE) crystal.
  * @rmtoll BDCR         LSEON         LL_RCC_LSE_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_Disable(void)
{
  CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);
}

/**
  * @brief  Enable external clock source (LSE bypass).
  * @rmtoll BDCR         LSEBYP        LL_RCC_LSE_EnableBypass
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void)
{
  SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
}

/**
  * @brief  Disable external clock source (LSE bypass).
  * @rmtoll BDCR         LSEBYP        LL_RCC_LSE_DisableBypass
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void)
{
  CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
}

/**
  * @brief  Set LSE oscillator drive capability
  * @note The oscillator is in Xtal mode when it is not in bypass mode.
  * @rmtoll BDCR         LSEDRV        LL_RCC_LSE_SetDriveCapability
  * @param  LSEDrive This parameter can be one of the following values:
  *         @arg @ref LL_RCC_LSEDRIVE_LOW
  *         @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
  *         @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
  *         @arg @ref LL_RCC_LSEDRIVE_HIGH
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive)
{
  MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive);
}

/**
  * @brief  Get LSE oscillator drive capability
  * @rmtoll BDCR         LSEDRV        LL_RCC_LSE_GetDriveCapability
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_LSEDRIVE_LOW
  *         @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
  *         @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
  *         @arg @ref LL_RCC_LSEDRIVE_HIGH
  */
__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void)
{
  return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV));
}

/**
  * @brief  Enable Clock security system on LSE.
  * @rmtoll BDCR         LSECSSON      LL_RCC_LSE_EnableCSS
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void)
{
  SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON);
}

/**
  * @brief  Disable Clock security system on LSE.
  * @note Clock security system can be disabled only after a LSE
  *       failure detection. In that case it MUST be disabled by software.
  * @rmtoll BDCR         LSECSSON      LL_RCC_LSE_DisableCSS
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void)
{
  CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON);
}

/**
  * @brief  Check if LSE oscillator Ready
  * @rmtoll BDCR         LSERDY        LL_RCC_LSE_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void)
{
  return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == RCC_BDCR_LSERDY) ? 1UL : 0UL);
}

/**
  * @brief  Enable LSE oscillator propagation for system clock
  * @rmtoll BDCR         LSESYSEN      LL_RCC_LSE_EnablePropagation
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_EnablePropagation(void)
{
  SET_BIT(RCC->BDCR, RCC_BDCR_LSESYSEN);
}

/**
  * @brief  Check if LSESYS oscillator Ready
  * @rmtoll BDCR         LSESYSRDY       LL_RCC_LSESYS_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_LSESYS_IsReady(void)
{
  return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSESYSRDY) == RCC_BDCR_LSESYSRDY) ? 1UL : 0UL);
}

/**
  * @brief  Disable LSE oscillator propagation for system clock
  * @rmtoll BDCR         LSESYSEN      LL_RCC_LSE_DisablePropagation
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_DisablePropagation(void)
{
  CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSESYSEN);
}

/**
  * @brief  Check if LSE oscillator propagation for system clock Ready
  * @rmtoll BDCR         LSESYSRDY     LL_RCC_LSE_IsPropagationReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_LSE_IsPropagationReady(void)
{
  return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSESYSRDY) == RCC_BDCR_LSESYSRDY) ? 1UL : 0UL);
}

/**
  * @brief  Check if CSS on LSE failure Detection
  * @rmtoll BDCR         LSECSSD       LL_RCC_LSE_IsCSSDetected
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_LSE_IsCSSDetected(void)
{
  return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == RCC_BDCR_LSECSSD) ? 1UL : 0UL);
}

/**
  * @brief  Enable LSE clock glitch filter.
  * @note   The glitches on LSE can be filtred by setting the LSEGFON.
  * @note   LSEGFON must be written when the LSE is disabled (LSEON = 0 and LSERDY = 0).
  * @rmtoll BDCR         LSEGFON      LL_RCC_LSE_EnableGlitchFilter
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_EnableGlitchFilter(void)
{
  SET_BIT(RCC->BDCR, RCC_BDCR_LSEGFON);
}

/**
  * @brief  Disable LSE clock glitch filter.
  * @note   LSEGFON must be written when the LSE is disabled (LSEON = 0 and LSERDY = 0).
  * @rmtoll BDCR         LSEGFON      LL_RCC_LSE_DisableGlitchFilter
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSE_DisableGlitchFilter(void)
{
  CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEGFON);
}

/**
  * @brief  Check if LSE clock glitch filter is enabled
  * @rmtoll BDCR         LSEGFON        LL_RCC_LSE_IsGlitchFilterEnabled
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_LSE_IsGlitchFilterEnabled(void)
{
  return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSEGFON) == RCC_BDCR_LSEGFON) ? 1UL : 0UL);
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_LSI LSI
  * @{
  */

/**
  * @brief  Enable LSI Oscillator
  * @rmtoll BDCR          LSION         LL_RCC_LSI_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSI_Enable(void)
{
  SET_BIT(RCC->BDCR, RCC_BDCR_LSION);
}

/**
  * @brief  Disable LSI Oscillator
  * @rmtoll BDCR          LSION         LL_RCC_LSI_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSI_Disable(void)
{
  CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSION);
}

/**
  * @brief  Check if LSI is Ready
  * @rmtoll BDCR          LSIRDY        LL_RCC_LSI_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void)
{
  return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSIRDY) == RCC_BDCR_LSIRDY) ? 1UL : 0UL);
}

/**
  * @brief  Set LSI prescaler
  * @rmtoll BDCR          LSIPREDIV        LL_RCC_LSI_SetPrescaler
  * @param  LSIPrescaler This parameter can be one of the following values:
  *         @arg @ref LL_RCC_LSI_DIV_1
  *         @arg @ref LL_RCC_LSI_DIV_128
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSI_SetPrescaler(uint32_t LSIPrescaler)
{
  MODIFY_REG(RCC->BDCR, RCC_BDCR_LSIPREDIV, LSIPrescaler);
}

/**
  * @brief  Get LSI prescaler
  * @rmtoll BDCR          LSIPREDIV        LL_RCC_LSI_GetPrescaler
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_LSI_DIV_1
  *         @arg @ref LL_RCC_LSI_DIV_128
  */
__STATIC_INLINE uint32_t LL_RCC_LSI_GetPrescaler(void)
{
  return (READ_BIT(RCC->BDCR, RCC_BDCR_LSIPREDIV));
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_MSIK MSIK
  * @{
  */

/**
  * @brief  Enable MSIK oscillator
  * @rmtoll CR           MSIKON         LL_RCC_MSIK_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIK_Enable(void)
{
  SET_BIT(RCC->CR, RCC_CR_MSIKON);
}

/**
  * @brief  Disable MSIK oscillator
  * @rmtoll CR           MSIKON         LL_RCC_MSIK_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIK_Disable(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_MSIKON);
}

/**
  * @brief  Check if MSIK oscillator Ready
  * @rmtoll CR           MSIKRDY        LL_RCC_MSIK_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_MSIK_IsReady(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_MSIKRDY) == RCC_CR_MSIKRDY) ? 1UL : 0UL);
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_SHSI SHSI
  * @{
  */

/**
  * @brief  Enable SHSI oscillator
  * @rmtoll CR           SHSION         LL_RCC_SHSI_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SHSI_Enable(void)
{
  SET_BIT(RCC->CR, RCC_CR_SHSION);
}

/**
  * @brief  Disable SHSI oscillator
  * @rmtoll CR           SHSION         LL_RCC_SHSI_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SHSI_Disable(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_SHSION);
}

/**
  * @brief  Check if SHSI oscillator Ready
  * @rmtoll CR           SHSIRDY        LL_RCC_SHSI_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_SHSI_IsReady(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_SHSIRDY) == RCC_CR_SHSIRDY) ? 1UL : 0UL);
}
/**
  * @}
  */

/**
  * @}
  */

/** @defgroup RCC_LL_EF_MSI MSI
  * @{
  */

/**
  * @brief  Enable MSIS oscillator
  * @rmtoll CR           MSISON         LL_RCC_MSIS_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIS_Enable(void)
{
  SET_BIT(RCC->CR, RCC_CR_MSISON);
}
#define LL_RCC_MSI_Enable   LL_RCC_MSIS_Enable  /*!< alias define for compatibility with legacy code */

/**
  * @brief  Disable MSIS oscillator
  * @rmtoll CR           MSISON         LL_RCC_MSIS_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIS_Disable(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_MSISON);
}
#define LL_RCC_MSI_Disable   LL_RCC_MSIS_Disable  /*!< alias define for compatibility with legacy code */

/**
  * @brief  Check if MSIS oscillator Ready
  * @rmtoll CR           MSISRDY        LL_RCC_MSIS_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_MSIS_IsReady(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_MSISRDY) == RCC_CR_MSISRDY) ? 1UL : 0UL);
}
#define LL_RCC_MSI_IsReady   LL_RCC_MSIS_IsReady  /*!< alias define for compatibility with legacy code */

/**
  * @brief  Enable MSI PLL-mode (Hardware auto calibration with LSE)
  * @note MSIPLLEN must be enabled after LSE is enabled (LSEON enabled)
  *       and ready (LSERDY set by hardware)
  * @note hardware protection to avoid enabling MSIPLLEN if LSE is not
  *       ready
  * @rmtoll CR           MSIPLLEN      LL_RCC_MSI_EnablePLLMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSI_EnablePLLMode(void)
{
  SET_BIT(RCC->CR, RCC_CR_MSIPLLEN);
}

/**
  * @brief  Disable MSI-PLL mode
  * @note cleared by hardware when LSE is disabled (LSEON = 0) or when
  *       the Clock Security System on LSE detects a LSE failure
  * @rmtoll CR           MSIPLLEN      LL_RCC_MSI_DisablePLLMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSI_DisablePLLMode(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_MSIPLLEN);
}

/**
  * @brief  Check if MSI-PLL mode has been enabled or not
  * @rmtoll CR           MSIPLLEN      LL_RCC_IsEnabledPLLMode
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledPLLMode(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_MSIPLLEN) == RCC_CR_MSIPLLEN) ? 1UL : 0UL);
}

/**
  * @brief Set clock source in PLL mode
  * @rmtoll CR          MSIPLLSEL         LL_RCC_SetMSIPLLMode
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLLMODE_MSIS
  *         @arg @ref LL_RCC_PLLMODE_MSIK
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetMSIPLLMode(uint32_t Source)
{
  MODIFY_REG(RCC->CR, RCC_CR_MSIPLLSEL, Source);
}

/**
  * @brief  Get Clock source in PLL Mode
  * @rmtoll CR         MSIPLLSEL        LL_RCC_GetMSIPLLMode
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_PLLMODE_MSIS
  *         @arg @ref LL_RCC_PLLMODE_MSIK
  */
__STATIC_INLINE uint32_t LL_RCC_GetMSIPLLMode(void)
{
  return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_MSIPLLSEL));
}

/**
  * @brief  Enable MSI fast mode
  * @rmtoll CR           MSIPLLFAST        LL_RCC_Enable_MSIPLLFAST
  * @note     This bit is used only if PLL mode is selected.
  */
__STATIC_INLINE void LL_RCC_Enable_MSIPLLFAST(void)
{
  SET_BIT(RCC->CR, RCC_CR_MSIPLLFAST);
}

/**
  * @brief  Disable MSI fast mode
  * @rmtoll CR           MSIPLLFAST        LL_RCC_Disable_MSIPLLFAST
  * @note     This bit is used only if PLL mode is selected.
  */
__STATIC_INLINE void LL_RCC_Disable_MSIPLLFAST(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_MSIPLLFAST);
}

/**
  * @brief  Check if MSI PLL Fast Mode is enable
  * @rmtoll CR           MSIPLLFAST        LL_RCC_MSI_IsEnabledMSIPLLFAST
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_MSI_IsEnabledMSIPLLFAST(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_MSIPLLFAST) == RCC_CR_MSIPLLFAST) ? 1UL : 0UL);
}

/**
  * @brief  Set MSI Bias mode
  * @rmtoll ICSCR1         MSIBIAS        LL_RCC_MSI_SetMSIBiasMode
  * @param  BiasMode This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSIBIASMODE_CONTINUOUS
  *         @arg @ref LL_RCC_MSIBIASMODE_SAMPLING

  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSI_SetMSIBiasMode(uint32_t BiasMode)
{
  MODIFY_REG(RCC->ICSCR1, RCC_ICSCR1_MSIBIAS, BiasMode);
}

/**
  * @brief  Get MSI Bias mode
  * @rmtoll ICSCR1         MSIBIAS        LL_RCC_MSI_GetMSIBiasMode
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_MSIBIASMODE_CONTINUOUS
  *         @arg @ref LL_RCC_MSIBIASMODE_SAMPLING

  */
__STATIC_INLINE uint32_t LL_RCC_MSI_GetMSIBiasMode(void)
{
  return (uint32_t)(READ_BIT(RCC->ICSCR1, RCC_ICSCR1_MSIBIAS));
}

/**
  * @brief  Enable MSIK even in stop mode
  * @note MSIK oscillator is forced ON even in Stop mode
  * @rmtoll CR           MSIKERON      LL_RCC_MSIK_EnableInStopMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIK_EnableInStopMode(void)
{
  SET_BIT(RCC->CR, RCC_CR_MSIKERON);
}

/**
  * @brief  Disable MSIK in stop mode
  * @rmtoll CR           MSIKERON      LL_RCC_MSIK_DisableInStopMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIK_DisableInStopMode(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_MSIKERON);
}

/**
  * @brief  Check if MSIK is enabled in stop mode
  * @rmtoll CR           MSIKERON        LL_RCC_MSIK_IsEnabledInStopMode
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_MSIK_IsEnabledInStopMode(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_MSIKERON) == RCC_CR_MSIKERON) ? 1UL : 0UL);
}

/**
  * @brief  Enable MSI clock range selection with MSIRANGE register
  * @note Write 0 has no effect. After a standby or a reset
  *       MSIRGSEL is at 0 and the MSI range value is provided by
  *       MSISRANGE
  * @rmtoll ICSCR1         MSIRGSEL      LL_RCC_MSI_EnableRangeSelection
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSI_EnableRangeSelection(void)
{
  SET_BIT(RCC->ICSCR1, RCC_ICSCR1_MSIRGSEL);
}

/**
  * @brief  Check if MSI clock range is selected with MSIRANGE register
  * @rmtoll ICSCR1         MSIRGSEL      LL_RCC_MSI_IsEnabledRangeSelect
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_MSI_IsEnabledRangeSelect(void)
{
  return ((READ_BIT(RCC->ICSCR1, RCC_ICSCR1_MSIRGSEL) == RCC_ICSCR1_MSIRGSEL) ? 1UL : 0UL);
}

/**
  * @brief  Configure the Internal Multi Speed oscillator (MSI) clock range in run mode.
  * @rmtoll ICSCR1         MSISRANGE      LL_RCC_MSIS_SetRange
  * @param  Range This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSISRANGE_0
  *         @arg @ref LL_RCC_MSISRANGE_1
  *         @arg @ref LL_RCC_MSISRANGE_2
  *         @arg @ref LL_RCC_MSISRANGE_3
  *         @arg @ref LL_RCC_MSISRANGE_4
  *         @arg @ref LL_RCC_MSISRANGE_5
  *         @arg @ref LL_RCC_MSISRANGE_6
  *         @arg @ref LL_RCC_MSISRANGE_7
  *         @arg @ref LL_RCC_MSISRANGE_8
  *         @arg @ref LL_RCC_MSISRANGE_9
  *         @arg @ref LL_RCC_MSISRANGE_10
  *         @arg @ref LL_RCC_MSISRANGE_11
  *         @arg @ref LL_RCC_MSISRANGE_12
  *         @arg @ref LL_RCC_MSISRANGE_13
  *         @arg @ref LL_RCC_MSISRANGE_14
  *         @arg @ref LL_RCC_MSISRANGE_15
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIS_SetRange(uint32_t Range)
{
  MODIFY_REG(RCC->ICSCR1, RCC_ICSCR1_MSISRANGE, Range);
}
#define LL_RCC_MSI_SetRange   LL_RCC_MSIS_SetRange  /*!< alias define for compatibility with legacy code */

/**
  * @brief  Get the Internal Multi Speed oscillator (MSI) clock range in run mode.
  * @rmtoll ICSCR1          MSISRANGE      LL_RCC_MSIS_GetRange
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_MSISRANGE_0
  *         @arg @ref LL_RCC_MSISRANGE_1
  *         @arg @ref LL_RCC_MSISRANGE_2
  *         @arg @ref LL_RCC_MSISRANGE_3
  *         @arg @ref LL_RCC_MSISRANGE_4
  *         @arg @ref LL_RCC_MSISRANGE_5
  *         @arg @ref LL_RCC_MSISRANGE_6
  *         @arg @ref LL_RCC_MSISRANGE_7
  *         @arg @ref LL_RCC_MSISRANGE_8
  *         @arg @ref LL_RCC_MSISRANGE_9
  *         @arg @ref LL_RCC_MSISRANGE_10
  *         @arg @ref LL_RCC_MSISRANGE_11
  *         @arg @ref LL_RCC_MSISRANGE_12
  *         @arg @ref LL_RCC_MSISRANGE_13
  *         @arg @ref LL_RCC_MSISRANGE_14
  *         @arg @ref LL_RCC_MSISRANGE_15
  */
__STATIC_INLINE uint32_t LL_RCC_MSIS_GetRange(void)
{
  return (uint32_t)(READ_BIT(RCC->ICSCR1, RCC_ICSCR1_MSISRANGE));
}
#define LL_RCC_MSI_GetRange   LL_RCC_MSIS_GetRange  /*!< alias define for compatibility with legacy code */

/**
  * @brief  Configure MSIS range used after standby
  * @rmtoll CSR          MSISSRANGE     LL_RCC_MSIS_SetRangeAfterStandby
  * @param  Range This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSISSRANGE_4
  *         @arg @ref LL_RCC_MSISSRANGE_5
  *         @arg @ref LL_RCC_MSISSRANGE_6
  *         @arg @ref LL_RCC_MSISSRANGE_7
  *         @arg @ref LL_RCC_MSISSRANGE_8
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIS_SetRangeAfterStandby(uint32_t Range)
{
  MODIFY_REG(RCC->CSR, RCC_CSR_MSISSRANGE, Range);
}
#define LL_RCC_MSI_SetRangeAfterStandby   LL_RCC_MSIS_SetRangeAfterStandby  /*!< alias define for compatibility with legacy code */

/**
  * @brief  Get MSIS range used after standby
  * @rmtoll CSR          MSISSRANGE     LL_RCC_MSIS_GetRangeAfterStandby
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_MSISSRANGE_4
  *         @arg @ref LL_RCC_MSISSRANGE_5
  *         @arg @ref LL_RCC_MSISSRANGE_6
  *         @arg @ref LL_RCC_MSISSRANGE_7
  *         @arg @ref LL_RCC_MSISSRANGE_8
  */
__STATIC_INLINE uint32_t LL_RCC_MSIS_GetRangeAfterStandby(void)
{
  return (uint32_t)(READ_BIT(RCC->CSR, RCC_CSR_MSISSRANGE));
}
#define LL_RCC_MSI_GetRangeAfterStandby   LL_RCC_MSIS_GetRangeAfterStandby  /*!< alias define for compatibility with legacy code */

/**
  * @brief  Set MSI OSCILLATORx Calibration trimming
  * @note user-programmable trimming value that is added to the MSICALx
  * @rmtoll ICSCR2        MSITRIMx       LL_RCC_MSI_SetCalibTrimming
  * @param  Value Between Min_Data = 0 and Max_Data = 31
  * @param  Oscillator  This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_0
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_1
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_2
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_3
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSI_SetCalibTrimming(uint32_t Value, uint32_t Oscillator)
{
  MODIFY_REG(RCC->ICSCR2, (RCC_ICSCR2_MSITRIM0  >> Oscillator), Value << (RCC_ICSCR2_MSITRIM0_Pos - Oscillator));
}

/**
  * @brief  Get MSI OSCILLATORx Calibration trimming
  * @rmtoll ICSCR2        MSITRIMx       LL_RCC_MSI_GetCalibTrimming
  * @retval Between 0 and 31
  * @param  Oscillator  This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_0
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_1
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_2
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_3
  */
__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibTrimming(uint32_t Oscillator)
{
  return (uint32_t)(READ_BIT(RCC->ICSCR2,
                             (RCC_ICSCR2_MSITRIM0  >> Oscillator)) >> (RCC_ICSCR2_MSITRIM0_Pos - Oscillator));
}

/**
  * @brief  Get MSI OSCILLATORx Calibration value
  * @note When MSITRIMx is written, MSICALx is updated with the sum of
  *       MSITRIMx and the factory trim value
  * @rmtoll ICSCR1        MSICALx        LL_RCC_MSI_GetCalibration
  * @param  Oscillator   This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_0
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_1
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_2
  *         @arg @ref LL_RCC_MSI_OSCILLATOR_3
  * @retval Between Min_Data = 0 and Max_Data = 31
  */
__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibration(uint32_t Oscillator)
{
  return (uint32_t)(READ_BIT(RCC->ICSCR1, (RCC_ICSCR1_MSICAL0 >> Oscillator)) >> (RCC_ICSCR1_MSICAL0_Pos - Oscillator));
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_MSIK MSIK
  * @{
  */

/**
  * @brief  Configure the Internal Multi Speed oscillator (MSIK) clock range in run mode.
  * @rmtoll ICSCR1         MSIKRANGE      LL_RCC_MSIK_SetRange
  * @param  Range This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSIKRANGE_0
  *         @arg @ref LL_RCC_MSIKRANGE_1
  *         @arg @ref LL_RCC_MSIKRANGE_2
  *         @arg @ref LL_RCC_MSIKRANGE_3
  *         @arg @ref LL_RCC_MSIKRANGE_4
  *         @arg @ref LL_RCC_MSIKRANGE_5
  *         @arg @ref LL_RCC_MSIKRANGE_6
  *         @arg @ref LL_RCC_MSIKRANGE_7
  *         @arg @ref LL_RCC_MSIKRANGE_8
  *         @arg @ref LL_RCC_MSIKRANGE_9
  *         @arg @ref LL_RCC_MSIKRANGE_10
  *         @arg @ref LL_RCC_MSIKRANGE_11
  *         @arg @ref LL_RCC_MSIKRANGE_12
  *         @arg @ref LL_RCC_MSIKRANGE_13
  *         @arg @ref LL_RCC_MSIKRANGE_14
  *         @arg @ref LL_RCC_MSIKRANGE_15
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIK_SetRange(uint32_t Range)
{
  MODIFY_REG(RCC->ICSCR1, RCC_ICSCR1_MSIKRANGE, Range);
}

/**
  * @brief  Get the Internal Multi Speed oscillator (MSIK) clock range in run mode.
  * @rmtoll ICSCR1           MSIKRANGE      LL_RCC_MSIK_GetRange
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_MSIKRANGE_0
  *         @arg @ref LL_RCC_MSIKRANGE_1
  *         @arg @ref LL_RCC_MSIKRANGE_2
  *         @arg @ref LL_RCC_MSIKRANGE_3
  *         @arg @ref LL_RCC_MSIKRANGE_4
  *         @arg @ref LL_RCC_MSIKRANGE_5
  *         @arg @ref LL_RCC_MSIKRANGE_6
  *         @arg @ref LL_RCC_MSIKRANGE_7
  *         @arg @ref LL_RCC_MSIKRANGE_8
  *         @arg @ref LL_RCC_MSIKRANGE_9
  *         @arg @ref LL_RCC_MSIKRANGE_10
  *         @arg @ref LL_RCC_MSIKRANGE_11
  *         @arg @ref LL_RCC_MSIKRANGE_12
  *         @arg @ref LL_RCC_MSIKRANGE_13
  *         @arg @ref LL_RCC_MSIKRANGE_14
  *         @arg @ref LL_RCC_MSIKRANGE_15
  */
__STATIC_INLINE uint32_t LL_RCC_MSIK_GetRange(void)
{
  return (uint32_t)(READ_BIT(RCC->ICSCR1, RCC_ICSCR1_MSIKRANGE));
}

/**
  * @brief  Configure MSIK range used after standby
  * @rmtoll CSR          MSIKSRANGE     LL_RCC_MSIK_SetRangeAfterStandby
  * @param  Range This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MSIKSRANGE_4
  *         @arg @ref LL_RCC_MSIKSRANGE_5
  *         @arg @ref LL_RCC_MSIKSRANGE_6
  *         @arg @ref LL_RCC_MSIKSRANGE_7
  *         @arg @ref LL_RCC_MSIKSRANGE_8
  * @retval None
  */
__STATIC_INLINE void LL_RCC_MSIK_SetRangeAfterStandby(uint32_t Range)
{
  MODIFY_REG(RCC->CSR, RCC_CSR_MSIKSRANGE, Range);
}

/**
  * @brief  Get MSIK range used after standby
  * @rmtoll CSR          MSIKSRANGE     LL_RCC_MSIK_GetRangeAfterStandby
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_MSIKSRANGE_4
  *         @arg @ref LL_RCC_MSIKSRANGE_5
  *         @arg @ref LL_RCC_MSIKSRANGE_6
  *         @arg @ref LL_RCC_MSIKSRANGE_7
  *         @arg @ref LL_RCC_MSIKSRANGE_8
  */
__STATIC_INLINE uint32_t LL_RCC_MSIK_GetRangeAfterStandby(void)
{
  return (uint32_t)(READ_BIT(RCC->CSR, RCC_CSR_MSIKSRANGE));
}
/**
  * @}
  */

/** @defgroup RCC_LL_EF_LSCO LSCO
  * @{
  */

/**
  * @brief  Enable Low speed clock
  * @rmtoll BDCR         LSCOEN        LL_RCC_LSCO_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSCO_Enable(void)
{
  SET_BIT(RCC->BDCR, RCC_BDCR_LSCOEN);
}

/**
  * @brief  Disable Low speed clock
  * @rmtoll BDCR         LSCOEN        LL_RCC_LSCO_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSCO_Disable(void)
{
  CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN);
}

/**
  * @brief  Configure Low speed clock selection
  * @rmtoll BDCR         LSCOSEL       LL_RCC_LSCO_SetSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE
  * @retval None
  */
__STATIC_INLINE void LL_RCC_LSCO_SetSource(uint32_t Source)
{
  MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL, Source);
}

/**
  * @brief  Get Low speed clock selection
  * @rmtoll BDCR         LSCOSEL       LL_RCC_LSCO_GetSource
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE
  */
__STATIC_INLINE uint32_t LL_RCC_LSCO_GetSource(void)
{
  return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSCOSEL));
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_System System
  * @{
  */

/**
  * @brief  Configure the system clock source
  * @rmtoll CFGR1         SW           LL_RCC_SetSysClkSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SYS_CLKSOURCE_MSIS
  *         @arg @ref LL_RCC_SYS_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_SYS_CLKSOURCE_HSE
  *         @arg @ref LL_RCC_SYS_CLKSOURCE_PLL1
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source)
{
  MODIFY_REG(RCC->CFGR1, RCC_CFGR1_SW, Source);
}

/**
  * @brief  Get the system clock source
  * @rmtoll CFGR1        SWS           LL_RCC_GetSysClkSource
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_MSIS
  *         @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI
  *         @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE
  *         @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL1
  */
__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void)
{
  return (uint32_t)(READ_BIT(RCC->CFGR1, RCC_CFGR1_SWS));
}

/**
  * @brief  Set AHB prescaler
  * @rmtoll CFGR2        HPRE          LL_RCC_SetAHBPrescaler
  * @param  Prescaler This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SYSCLK_DIV_1
  *         @arg @ref LL_RCC_SYSCLK_DIV_2
  *         @arg @ref LL_RCC_SYSCLK_DIV_4
  *         @arg @ref LL_RCC_SYSCLK_DIV_8
  *         @arg @ref LL_RCC_SYSCLK_DIV_16
  *         @arg @ref LL_RCC_SYSCLK_DIV_64
  *         @arg @ref LL_RCC_SYSCLK_DIV_128
  *         @arg @ref LL_RCC_SYSCLK_DIV_256
  *         @arg @ref LL_RCC_SYSCLK_DIV_512
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler)
{
  MODIFY_REG(RCC->CFGR2, RCC_CFGR2_HPRE, Prescaler);
}

/**
  * @brief  Set Systick clock source
  * @rmtoll CCIPR1      SYSTICKSEL    LL_RCC_SetSystickClockSource
  * @param  SystickSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SYSTICK_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_SYSTICK_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_SYSTICK_CLKSOURCE_HCLKDIV8
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetSystickClockSource(uint32_t SystickSource)
{
  MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_SYSTICKSEL, SystickSource);
}

/**
  * @brief  Set APB1 prescaler
  * @rmtoll CFGR2         PPRE1         LL_RCC_SetAPB1Prescaler
  * @param  Prescaler This parameter can be one of the following values:
  *         @arg @ref LL_RCC_APB1_DIV_1
  *         @arg @ref LL_RCC_APB1_DIV_2
  *         @arg @ref LL_RCC_APB1_DIV_4
  *         @arg @ref LL_RCC_APB1_DIV_8
  *         @arg @ref LL_RCC_APB1_DIV_16
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler)
{
  MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PPRE1, Prescaler);
}

/**
  * @brief  Set APB2 prescaler
  * @rmtoll CFGR2         PPRE2         LL_RCC_SetAPB2Prescaler
  * @param  Prescaler This parameter can be one of the following values:
  *         @arg @ref LL_RCC_APB2_DIV_1
  *         @arg @ref LL_RCC_APB2_DIV_2
  *         @arg @ref LL_RCC_APB2_DIV_4
  *         @arg @ref LL_RCC_APB2_DIV_8
  *         @arg @ref LL_RCC_APB2_DIV_16
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler)
{
  MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PPRE2, Prescaler);
}

/**
  * @brief  Set APB3 prescaler
  * @rmtoll CFGR3         PPRE3         LL_RCC_SetAPB3Prescaler
  * @param  Prescaler This parameter can be one of the following values:
  *         @arg @ref LL_RCC_APB3_DIV_1
  *         @arg @ref LL_RCC_APB3_DIV_2
  *         @arg @ref LL_RCC_APB3_DIV_4
  *         @arg @ref LL_RCC_APB3_DIV_8
  *         @arg @ref LL_RCC_APB3_DIV_16
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetAPB3Prescaler(uint32_t Prescaler)
{
  MODIFY_REG(RCC->CFGR3, RCC_CFGR3_PPRE3, Prescaler);
}

#if defined(RCC_CFGR2_PPRE_DPHY)
/**
  * @brief  Set DPHY clock prescaler
  * @rmtoll CFGR2         PPRE_DPHY         LL_RCC_SetDPHYPrescaler
  * @param  Prescaler This parameter can be one of the following values:
  *         @arg @ref LL_RCC_DPHY_DIV_1
  *         @arg @ref LL_RCC_DPHY_DIV_2
  *         @arg @ref LL_RCC_DPHY_DIV_4
  *         @arg @ref LL_RCC_DPHY_DIV_8
  *         @arg @ref LL_RCC_DPHY_DIV_16
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetDPHYPrescaler(uint32_t Prescaler)
{
  MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PPRE_DPHY, Prescaler);
}
#endif /* RCC_CFGR2_PPRE_DPHY */

/**
  * @brief  Get AHB prescaler
  * @rmtoll CFGR2         HPRE          LL_RCC_GetAHBPrescaler
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_SYSCLK_DIV_1
  *         @arg @ref LL_RCC_SYSCLK_DIV_2
  *         @arg @ref LL_RCC_SYSCLK_DIV_4
  *         @arg @ref LL_RCC_SYSCLK_DIV_8
  *         @arg @ref LL_RCC_SYSCLK_DIV_16
  *         @arg @ref LL_RCC_SYSCLK_DIV_64
  *         @arg @ref LL_RCC_SYSCLK_DIV_128
  *         @arg @ref LL_RCC_SYSCLK_DIV_256
  *         @arg @ref LL_RCC_SYSCLK_DIV_512
  */
__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void)
{
  return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_HPRE));
}

/**
  * @brief  Get Sysctick clock source
  * @rmtoll CCIPR1       SYSTICKSEL    LL_RCC_SetSystickClockSource
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_SYSTICK_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_SYSTICK_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_SYSTICK_CLKSOURCE_HCLKDIV8
  */
__STATIC_INLINE uint32_t LL_RCC_GetSystickClockSource(void)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_SYSTICKSEL));
}

/**
  * @brief  Get APB1 prescaler
  * @rmtoll CFGR2         PPRE1         LL_RCC_GetAPB1Prescaler
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_APB1_DIV_1
  *         @arg @ref LL_RCC_APB1_DIV_2
  *         @arg @ref LL_RCC_APB1_DIV_4
  *         @arg @ref LL_RCC_APB1_DIV_8
  *         @arg @ref LL_RCC_APB1_DIV_16
  */
__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void)
{
  return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PPRE1));
}

/**
  * @brief  Get APB2 prescaler
  * @rmtoll CFGR2         PPRE2         LL_RCC_GetAPB2Prescaler
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_APB2_DIV_1
  *         @arg @ref LL_RCC_APB2_DIV_2
  *         @arg @ref LL_RCC_APB2_DIV_4
  *         @arg @ref LL_RCC_APB2_DIV_8
  *         @arg @ref LL_RCC_APB2_DIV_16
  */
__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void)
{
  return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PPRE2));
}

/**
  * @brief  Get APB3 prescaler
  * @rmtoll CFGR3         PPRE3         LL_RCC_GetAPB2Prescaler
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_APB3_DIV_1
  *         @arg @ref LL_RCC_APB3_DIV_2
  *         @arg @ref LL_RCC_APB3_DIV_4
  *         @arg @ref LL_RCC_APB3_DIV_8
  *         @arg @ref LL_RCC_APB3_DIV_16
  */
__STATIC_INLINE uint32_t LL_RCC_GetAPB3Prescaler(void)
{
  return (uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_PPRE3));
}

#if defined(RCC_CFGR2_PPRE_DPHY)
/**
  * @brief  Get DPHY clock prescaler
  * @rmtoll CFGR2         PPRE_DPHY         LL_RCC_GetDPHYPrescaler
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_DPHY_DIV_1
  *         @arg @ref LL_RCC_DPHY_DIV_2
  *         @arg @ref LL_RCC_DPHY_DIV_4
  *         @arg @ref LL_RCC_DPHY_DIV_8
  *         @arg @ref LL_RCC_DPHY_DIV_16
  */
__STATIC_INLINE uint32_t LL_RCC_GetDPHYPrescaler(void)
{
  return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PPRE_DPHY));
}
#endif /* RCC_CFGR2_PPRE_DPHY */

/**
  * @brief  Set Clock After Wake-Up From Stop mode
  * @rmtoll CFGR1       STOPWUCK      LL_RCC_SetClkAfterWakeFromStop
  * @param  Clock This parameter can be one of the following values:
  *         @arg @ref LL_RCC_STOP_WAKEUPCLOCK_MSIS
  *         @arg @ref LL_RCC_STOP_WAKEUPCLOCK_HSI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetClkAfterWakeFromStop(uint32_t Clock)
{
  MODIFY_REG(RCC->CFGR1, RCC_CFGR1_STOPWUCK, Clock);
}

/**
  * @brief  Get Clock After Wake-Up From Stop mode
  * @rmtoll CFGR1         STOPWUCK      LL_RCC_GetClkAfterWakeFromStop
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_STOP_WAKEUPCLOCK_MSIS
  *         @arg @ref LL_RCC_STOP_WAKEUPCLOCK_HSI
  */
__STATIC_INLINE uint32_t LL_RCC_GetClkAfterWakeFromStop(void)
{
  return (uint32_t)(READ_BIT(RCC->CFGR1, RCC_CFGR1_STOPWUCK));
}

/**
  * @brief  Set Kernel Clock After Wake-Up From Stop mode
  * @rmtoll CFGR1       STOPKERWUCK LL_RCC_SetKerClkAfterWakeFromStop
  * @param  Clock This parameter can be one of the following values:
  *         @arg @ref LL_RCC_STOP_WAKEUPKERCLOCK_MSIK
  *         @arg @ref LL_RCC_STOP_WAKEUPKERCLOCK_HSI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetKerClkAfterWakeFromStop(uint32_t Clock)
{
  MODIFY_REG(RCC->CFGR1, RCC_CFGR1_STOPKERWUCK, Clock);
}

/**
  * @brief  Get Kernel Clock After Wake-Up From Stop mode
  * @rmtoll CFGR1         STOPKERWUCK LL_RCC_GetKerClkAfterWakeFromStop
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_STOP_WAKEUPKERCLOCK_MSIK
  *         @arg @ref LL_RCC_STOP_WAKEUPKERCLOCK_HSI
  */
__STATIC_INLINE uint32_t LL_RCC_GetKerClkAfterWakeFromStop(void)
{
  return (uint32_t)(READ_BIT(RCC->CFGR1, RCC_CFGR1_STOPKERWUCK));
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_MCO MCO
  * @{
  */

/**
  * @brief  Configure MCOx
  * @rmtoll CFGR1         MCOSEL        LL_RCC_ConfigMCO\n
  *         CFGR1         MCOPRE        LL_RCC_ConfigMCO
  * @param  MCOxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK
  *         @arg @ref LL_RCC_MCO1SOURCE_SYSCLK
  *         @arg @ref LL_RCC_MCO1SOURCE_MSIS
  *         @arg @ref LL_RCC_MCO1SOURCE_HSI
  *         @arg @ref LL_RCC_MCO1SOURCE_HSE
  *         @arg @ref LL_RCC_MCO1SOURCE_HSI48
  *         @arg @ref LL_RCC_MCO1SOURCE_PLLCLK
  *         @arg @ref LL_RCC_MCO1SOURCE_LSI
  *         @arg @ref LL_RCC_MCO1SOURCE_LSE
  * @param  MCOxPrescaler This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MCO1_DIV_1
  *         @arg @ref LL_RCC_MCO1_DIV_2
  *         @arg @ref LL_RCC_MCO1_DIV_4
  *         @arg @ref LL_RCC_MCO1_DIV_8
  *         @arg @ref LL_RCC_MCO1_DIV_16
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler)
{
  MODIFY_REG(RCC->CFGR1, RCC_CFGR1_MCOSEL | RCC_CFGR1_MCOPRE, MCOxSource | MCOxPrescaler);
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source
  * @{
  */

/**
  * @brief  Configure USARTx clock source
  * @rmtoll CCIPR1       USART1SEL     LL_RCC_SetUSARTClockSource\n
  *         CCIPR1       USART2SEL     LL_RCC_SetUSARTClockSource\n
  *         CCIPR1       USART3SEL     LL_RCC_SetUSARTClockSource\n
  *         CCIPR2       USART6SEL     LL_RCC_SetUSARTClockSource
  * @param  USARTxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
  *         @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*)
  *         @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*)
  *         @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*)
  *         @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*)
  *         @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_USART3_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_USART3_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_USART6_CLKSOURCE_PCLK1 (*)
  *         @arg @ref LL_RCC_USART6_CLKSOURCE_SYSCLK (*)
  *         @arg @ref LL_RCC_USART6_CLKSOURCE_HSI (*)
  *         @arg @ref LL_RCC_USART6_CLKSOURCE_LSE (*)
  *
  *         (*) Availability depends on devices.

  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource)
{
  __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0xE0U + (USARTxSource >> 24U));
  MODIFY_REG(*reg, 3UL << ((USARTxSource & 0x001F0000U) >> 16U), ((USARTxSource & 0x000000FFU) << \
                                                                  ((USARTxSource & 0x001F0000U) >> 16U)));
}

/**
  * @brief  Configure UARTx clock source
  * @rmtoll CCIPR1       UART4SEL      LL_RCC_SetUARTClockSource\n
  *         CCIPR1       UART5SEL      LL_RCC_SetUARTClockSource
  * @param  UARTxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetUARTClockSource(uint32_t UARTxSource)
{
  MODIFY_REG(RCC->CCIPR1, UARTxSource >> 16U, (UARTxSource & 0x0000FFFFU));
}

/**
  * @brief  Configure LPUARTx clock source
  * @rmtoll CCIPR3       LPUART1SEL    LL_RCC_SetLPUARTClockSource
  * @param  LPUARTxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK3
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE_MSIK
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t LPUARTxSource)
{
  MODIFY_REG(RCC->CCIPR3, RCC_CCIPR3_LPUART1SEL, LPUARTxSource);
}

/**
  * @brief  Configure I2Cx clock source
  * @rmtoll CCIPR1       I2C1SEL       LL_RCC_SetI2CClockSource\n
  *         CCIPR1       I2C2SEL       LL_RCC_SetI2CClockSource\n
  *         CCIPR3       I2C3SEL       LL_RCC_SetI2CClockSource\n
  *         CCIPR1       I2C4SEL       LL_RCC_SetI2CClockSource
  * @param  I2CxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_I2C1_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_I2C2_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK3
  *         @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_I2C3_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_I2C4_CLKSOURCE_MSIK
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource)
{
  __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0xE0U + (I2CxSource >> 24U));
  MODIFY_REG(*reg, 3U << (((I2CxSource & 0x00FF0000U) >> 16U) & 0x1FU), ((I2CxSource & 0x000000FFU) << \
                                                                         (((I2CxSource & 0x00FF0000U) >> 16U) & \
                                                                          0x1FU)));
}

/**
  * @brief  Configure SPIx clock source
  * @rmtoll CCIPR1   SPI1SEL       LL_RCC_SetSPIClockSource\n
  *            CCIPR1    SPI1SEL       LL_RCC_SetSPIClockSource\n
  *            CCIPR1    SPI2SEL       LL_RCC_SetSPIClockSource\n
  *            CCIPR3    SPI3SEL       LL_RCC_SetSPIClockSource
  * @param  SPIxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SPI1_CLKSOURCE_PCLK2
  *         @arg @ref LL_RCC_SPI1_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_SPI1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_SPI1_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_SPI2_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_SPI2_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_SPI2_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_SPI2_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_SPI3_CLKSOURCE_PCLK3
  *         @arg @ref LL_RCC_SPI3_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_SPI3_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_SPI3_CLKSOURCE_MSIK
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetSPIClockSource(uint32_t SPIxSource)
{
  __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0xE0U + (SPIxSource >> 24U));
  MODIFY_REG(*reg, 3U << (((SPIxSource & 0x00FF0000U) >> 16U) & 0x1FU), ((SPIxSource & 0x000000FFU) << \
                                                                         (((SPIxSource & 0x00FF0000U) >> 16U) & \
                                                                          0x1FU)));
}

/**
  * @brief  Configure LPTIMx clock source
  * @rmtoll CCIPR1       LPTIM2SEL     LL_RCC_SetLPTIMClockSource\n
  *         CCIPR3       LPTIM2SEL     LL_RCC_SetLPTIMClockSource\n
  *         CCIPR3       LPTIM34SEL    LL_RCC_SetLPTIMClockSource
  * @param  LPTIMxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_LPTIM1_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_LPTIM34_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_LPTIM34_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_LPTIM34_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_LPTIM34_CLKSOURCE_LSE
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource)
{
  __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0xE0U + (LPTIMxSource >> 24U));
  MODIFY_REG(*reg, 3U << (((LPTIMxSource & 0x00FF0000U) >> 16U) & 0x1FU), ((LPTIMxSource & 0x000000FFU) << \
                                                                           (((LPTIMxSource & 0x00FF0000U) >> 16U) & \
                                                                            0x1FU)));
}

/**
  * @brief  Configure FDCAN kernel clock source
  * @rmtoll CCIPR1       FDCANSEL      LL_RCC_SetFDCANClockSource
  * @param  FDCANxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE
  *         @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL2
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetFDCANClockSource(uint32_t FDCANxSource)
{
  MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_FDCANSEL, FDCANxSource);
}

/**
  * @brief  Configure SAIx clock source
  * @rmtoll CCIPR2       SAI1SEL       LL_RCC_SetSAIClockSource\n
  *         CCIPR2       SAI2SEL       LL_RCC_SetSAIClockSource
  * @param  SAIxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL1 (*)
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL2 (*)
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL3 (*)
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN (*)
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_HSI (*)
  *
  *         (*) Availability depends on devices.
  *
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource)
{
  MODIFY_REG(RCC->CCIPR2, (SAIxSource >> 16U), (SAIxSource & 0x0000FFFFU));
}

/**
  * @brief  Configure SDMMC1/2 kernel clock source
  * @rmtoll CCIPR2       SDMMCSEL      LL_RCC_SetSDMMCKernelClockSource
  * @param  SDMMCxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SDMMC12_KERNELCLKSOURCE_48CLK
  *         @arg @ref LL_RCC_SDMMC12_KERNELCLKSOURCE_PLL1 "P"
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetSDMMCKernelClockSource(uint32_t SDMMCxSource)
{
  MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL, SDMMCxSource);
}

/**
  * @brief  Configure SDMMC1/2 clock source
  * @rmtoll CCIPR1       ICLKSEL      LL_RCC_SetSDMMCClockSource
  * @param  SDMMCxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SDMMC12_CLKSOURCE_HSI48
  *         @arg @ref LL_RCC_SDMMC12_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_SDMMC12_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_SDMMC12_CLKSOURCE_MSIK
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetSDMMCClockSource(uint32_t SDMMCxSource)
{
  MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ICLKSEL, SDMMCxSource);
}

/**
  * @brief  Configure RNG clock source
  * @rmtoll CCIPR2       RNGSEL      LL_RCC_SetRNGClockSource
  * @param  RNGxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48
  *         @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48_DIV2
  *         @arg @ref LL_RCC_RNG_CLKSOURCE_HSI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource)
{
  MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_RNGSEL, RNGxSource);
}

#if defined(RCC_CCIPR2_USBPHYCSEL)
/**
  * @brief  Configure USBPHY clock source
  * @rmtoll CCIPR2         USBPHYCSEL        LL_RCC_SetUSBPHYClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_USBPHYCLKSOURCE_HSE
  *         @arg @ref LL_RCC_USBPHYCLKSOURCE_HSE_DIV2
  *         @arg @ref LL_RCC_USBPHYCLKSOURCE_PLL1
  *         @arg @ref LL_RCC_USBPHYCLKSOURCE_PLL1_DIV2
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetUSBPHYClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_USBPHYCSEL, Source);
}
#endif /* RCC_CCIPR2_USBPHYCSEL */

/**
  * @brief  Configure USB clock source
  * @rmtoll CCIPR1       ICLKSEL      LL_RCC_SetUSBClockSource
  * @param  USBxSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_USB_CLKSOURCE_HSI48
  *         @arg @ref LL_RCC_USB_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_USB_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_USB_CLKSOURCE_MSIK
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource)
{
  MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ICLKSEL, USBxSource);
}

/**
  * @brief  Configure ADC clock source
  * @rmtoll CCIPR3       ADCDACSEL        LL_RCC_SetADCDACClockSource
  * @param  ADCxDAC1Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_HCLK
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_HSE
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_MSIK
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetADCDACClockSource(uint32_t ADCxDAC1Source)
{
  MODIFY_REG(RCC->CCIPR3, RCC_CCIPR3_ADCDACSEL, ADCxDAC1Source);
}

/**
  * @brief  Configure DAC1 clock source
  * @rmtoll CCIPR3        DAC1SEL        LL_RCC_SetDAC1ClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_DAC1_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_DAC1_CLKSOURCE_LSI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetDAC1ClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->CCIPR3, RCC_CCIPR3_DAC1SEL, Source);
}

/**
  * @brief  Configure ADF1 clock source
  * @rmtoll CCIPR3        ADF1SEL        LL_RCC_SetADF1ClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_HCLK
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_PLL3
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_PIN
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetADF1ClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->CCIPR3, RCC_CCIPR3_ADF1SEL, Source);
}

/**
  * @brief  Configure MDF1 clock source
  * @rmtoll CCIPR3        MDF1SEL        LL_RCC_SetMDF1ClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_HCLK
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_PLL3
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_PIN
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetMDF1ClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_MDF1SEL, Source);
}

/**
  * @brief  Configure OCTOSPI kernel clock source
  * @rmtoll CCIPR2         OSPISEL        LL_RCC_SetOCTOSPIClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL2
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetOCTOSPIClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_OCTOSPISEL, Source);
}

#if defined (HSPI1)
/**
  * @brief  Configure HSPI kernel clock source
  * @rmtoll CCIPR2         HSPISEL        LL_RCC_SetHSPIClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_HSPI_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_HSPI_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_HSPI_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_HSPI_CLKSOURCE_PLL3
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetHSPIClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_HSPISEL, Source);
}
#endif /* HSPI1 */

#if defined(SAES)
/**
  * @brief  Configure SAES clock source
  * @rmtoll CCIPR2        SAESSEL        LL_RCC_SetSAESClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SAES_CLKSOURCE_SHSI
  *         @arg @ref LL_RCC_SAES_CLKSOURCE_SHSI_DIV2
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetSAESClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SAESSEL, Source);
}
#endif /* SAES */

#if defined(DSI)
/**
  * @brief  Configure DSIx clock source
  * @rmtoll CCIPR2         DSISEL        LL_RCC_SetDSIClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
  *         @arg @ref LL_RCC_DSI_CLKSOURCE_PLL3
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DSIHOSTSEL, Source);
}
#endif /* DSI */

#if defined(LTDC)
/**
  * @brief  Configure LTDCx clock source
  * @rmtoll CCIPR2         LTDCSEL        LL_RCC_SetLTDCClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_LTDC_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_LTDC_CLKSOURCE_PLL3
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetLTDCClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_LTDCSEL, Source);
}
#endif /* LTDC */
/**
  * @brief  Get USARTx clock source
  * @rmtoll CCIPR1       USART1SEL     LL_RCC_GetUSARTClockSource\n
  *         CCIPR1       USART2SEL     LL_RCC_GetUSARTClockSource\n
  *         CCIPR1       USART3SEL     LL_RCC_GetUSARTClockSource\n
  *         CCIPR2       USART6SEL     LL_RCC_GetUSARTClockSource
  * @param  USARTx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_USART1_CLKSOURCE
  *         @arg @ref LL_RCC_USART2_CLKSOURCE (*)
  *         @arg @ref LL_RCC_USART3_CLKSOURCE
  *         @arg @ref LL_RCC_USART6_CLKSOURCE (*)
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
  *         @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*)
  *         @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*)
  *         @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*)
  *         @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*)
  *         @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_USART3_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_USART3_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_USART6_CLKSOURCE_PCLK1 (*)
  *         @arg @ref LL_RCC_USART6_CLKSOURCE_SYSCLK (*)
  *         @arg @ref LL_RCC_USART6_CLKSOURCE_HSI (*)
  *         @arg @ref LL_RCC_USART6_CLKSOURCE_LSE (*)
  *
  *         (*) Availability depends on devices.
  */
__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx)
{
  __IO const uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0xE0U + (USARTx >> 24U));
  return (uint32_t)((READ_BIT(*reg, 3UL << ((USARTx & 0x001F0000U) >> 16U)) >> \
                     ((USARTx & 0x001F0000U) >> 16U)) | (USARTx & 0xFFFF0000U));
}

/**
  * @brief  Get UARTx clock source
  * @rmtoll CCIPR1       UART4SEL      LL_RCC_GetUARTClockSource\n
  *         CCIPR1       UART5SEL      LL_RCC_GetUARTClockSource
  * @param  UARTx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_UART4_CLKSOURCE
  *         @arg @ref LL_RCC_UART5_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
  */
__STATIC_INLINE uint32_t LL_RCC_GetUARTClockSource(uint32_t UARTx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR1, UARTx) | (UARTx << 16U));
}

/**
  * @brief  Get LPUARTx clock source
  * @rmtoll CCIPR1       LPUART1SEL    LL_RCC_GetLPUARTClockSource
  * @param  LPUARTx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK3
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE
  */
__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t LPUARTx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR3, LPUARTx));
}

/**
  * @brief  Get I2Cx clock source
  * @rmtoll CCIPR1       I2C1SEL       LL_RCC_GetI2CClockSource\n
  *         CCIPR1       I2C2SEL       LL_RCC_GetI2CClockSource\n
  *         CCIPR3       I2C3SEL       LL_RCC_GetI2CClockSource\n
  *         CCIPR1       I2C4SEL       LL_RCC_GetI2CClockSource
  * @param  I2Cx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_I2C1_CLKSOURCE
  *         @arg @ref LL_RCC_I2C2_CLKSOURCE
  *         @arg @ref LL_RCC_I2C3_CLKSOURCE
  *         @arg @ref LL_RCC_I2C4_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK3
  *         @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI
 */
__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx)
{
  __IO const uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0xE0U + (I2Cx >> 24U));
  return (uint32_t)((READ_BIT(*reg, (3UL << (((I2Cx & 0x00FF0000UL) >> 16U) & 0x1FUL))) >> \
                     (((I2Cx & 0x00FF0000UL) >> 16U) & 0x1FUL)) | (I2Cx & 0xFFFF0000UL));
}

/**
  * @brief  Get SPIx clock source
  * @rmtoll CCIPR1       SPI1SEL       LL_RCC_GetSPIClockSource\n
  *         CCIPR1       SPI2SEL       LL_RCC_GetSPIClockSource\n
  *         CCIPR3       SPI3SEL       LL_RCC_GetSPIClockSource
  * @param  SPIx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SPI1_CLKSOURCE
  *         @arg @ref LL_RCC_SPI2_CLKSOURCE
  *         @arg @ref LL_RCC_SPI3_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_SPI1_CLKSOURCE_PCLK2
  *         @arg @ref LL_RCC_SPI1_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_SPI1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_SPI1_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_SPI2_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_SPI2_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_SPI2_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_SPI2_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_SPI3_CLKSOURCE_PCLK3
  *         @arg @ref LL_RCC_SPI3_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_SPI3_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_SPI3_CLKSOURCE_MSIK
 */
__STATIC_INLINE uint32_t LL_RCC_GetSPIClockSource(uint32_t SPIx)
{
  __IO const uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0xE0U + (SPIx >> 24U));
  return (uint32_t)((READ_BIT(*reg, (3UL << (((SPIx & 0x00FF0000UL) >> 16U) & 0x1FUL))) >> \
                     (((SPIx & 0x00FF0000UL) >> 16U) & 0x1FUL)) | (SPIx & 0xFFFF0000UL));
}

/**
  * @brief  Get LPTIMx clock source
  * @rmtoll CCIPR1       LPTIM2SEL     LL_RCC_GetLPTIMClockSource\n
  *         CCIPR3       LPTIM2SEL     LL_RCC_GetLPTIMClockSource\n
  *         CCIPR3       LPTIM34SEL    LL_RCC_GetLPTIMClockSource
  * @param  LPTIMx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_LPTIM1_CLKSOURCE
  *         @arg @ref LL_RCC_LPTIM2_CLKSOURCE
  *         @arg @ref LL_RCC_LPTIM34_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_LPTIM1_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1
  *         @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_LPTIM34_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_LPTIM34_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_LPTIM34_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_LPTIM34_CLKSOURCE_LSE
  */
__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx)
{
  __IO const uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0xE0U + (LPTIMx >> 24U));
  return (uint32_t)((READ_BIT(*reg, (3UL << (((LPTIMx & 0x00FF0000UL) >> 16U) & 0x1FUL))) >> \
                     (((LPTIMx & 0x00FF0000UL) >> 16U) & 0x1FUL)) | (LPTIMx & 0xFFFF0000UL));
}

/**
  * @brief  Set Tim Input capture clock source
  * @rmtoll CCIPR1       TIMICSEL      LL_RCC_SetTIMICClockSource
  * @param  TIMICSource This parameter can be one of the following combined values:
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_NONE
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_HSI_DIV256
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_MSIS_DIV1024
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_MSIS_DIV4
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_MSIK_DIV4
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_MSIK_DIV1024
  * @note    HSI, MSI and MSIK clocks without division are also available when TIMICSEL[2] is 1.
  * @note    combination to be avoided :
  *                       LL_RCC_TIMIC_CLKSOURCE_MSIS_DIV1024 and LL_RCC_CLKSOURCE_TIMIC_MSIK_DIV1024
  *                       LL_RCC_TIMIC_CLKSOURCE_MSIS_DIV4 and LL_RCC_CLKSOURCE_TIMIC_MSIK_DIV4
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetTIMICClockSource(uint32_t TIMICSource)
{
  MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_TIMICSEL, TIMICSource);
}

/**
  * @brief  Get Tim Input capture clock source
  * @rmtoll CCIPR1       TIMICSEL      LL_RCC_GetTIMICClockSource
  * @retval Returned value can be one of the following combined values:
  *          @arg @ref   LL_RCC_TIMIC_CLKSOURCE_NONE
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_HSI_DIV256
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_MSIS_DIV1024
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_MSIS_DIV4
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_MSIK_DIV4
  *          @arg @ref    LL_RCC_TIMIC_CLKSOURCE_MSIK_DIV1024
  */
__STATIC_INLINE uint32_t LL_RCC_GetTIMICClockSource(void)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_TIMICSEL));
}

/**
  * @brief  Get FDCAN kernel clock source
  * @rmtoll CCIPR1         FDCANSEL        LL_RCC_GetFDCANClockSource
  * @param  FDCANx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_FDCAN_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE
  *         @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL2
  */
__STATIC_INLINE uint32_t LL_RCC_GetFDCANClockSource(uint32_t FDCANx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR1, FDCANx));
}

/**
  * @brief  Get SAIx clock source
  * @rmtoll CCIPR2       SAI1SEL       LL_RCC_GetSAIClockSource\n
  *         CCIPR2       SAI2SEL       LL_RCC_GetSAIClockSource
  * @param  SAIx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE (*)
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
  *         @arg @ref LL_RCC_SAI1_CLKSOURCE_HSI
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL1 (*)
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL2 (*)
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL3 (*)
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN (*)
  *         @arg @ref LL_RCC_SAI2_CLKSOURCE_HSI (*)
  *
  *         (*) Availability depends on devices.
  */
__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, SAIx) | (SAIx << 16U));
}

/**
  * @brief  Get SDMMCx kernel clock source
  * @rmtoll CCIPR2       SDMMCSEL      LL_RCC_GetSDMMCKernelClockSource
  * @param  SDMMCx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SDMMC_KERNELCLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_SDMMC12_KERNELCLKSOURCE_48CLK
  *         @arg @ref LL_RCC_SDMMC12_KERNELCLKSOURCE_PLL1 "P"
  */
__STATIC_INLINE uint32_t LL_RCC_GetSDMMCKernelClockSource(uint32_t SDMMCx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, SDMMCx));
}

/**
  * @brief  Get SDMMC1/2 clock source
  * @rmtoll CCIPR1       ICLKSEL      LL_RCC_GetSDMMCClockSource
  * @param  SDMMCx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SDMMC_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_SDMMC12_CLKSOURCE_HSI48
  *         @arg @ref LL_RCC_SDMMC12_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_SDMMC12_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_SDMMC12_CLKSOURCE_MSIK
  */
__STATIC_INLINE uint32_t LL_RCC_GetSDMMCClockSource(uint32_t SDMMCx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR1, SDMMCx));
}

/**
  * @brief  Get RNGx clock source
  * @rmtoll CCIPR2       RNGSEL      LL_RCC_GetRNGClockSource
  * @param  RNGx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_RNG_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48
  *         @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48_DIV2
  *         @arg @ref LL_RCC_RNG_CLKSOURCE_HSI
  */
__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, RNGx));
}

#if defined(RCC_CCIPR2_USBPHYCSEL)
/**
  * @brief  Get USBPHYx clock source
  * @rmtoll CCIPR2         USBPHYCSEL        LL_RCC_GetUSBPHYClockSource
  * @param  USBPHYx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_USBPHY_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_USBPHYCLKSOURCE_HSE
  *         @arg @ref LL_RCC_USBPHYCLKSOURCE_HSE_DIV2
  *         @arg @ref LL_RCC_USBPHYCLKSOURCE_PLL1
  *         @arg @ref LL_RCC_USBPHYCLKSOURCE_PLL1_DIV2
  */
__STATIC_INLINE uint32_t LL_RCC_GetUSBPHYClockSource(uint32_t USBPHYx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, USBPHYx));
}
#endif /* RCC_CCIPR2_USBPHYCSEL */

/**
  * @brief  Get USBx clock source
  * @rmtoll CCIPR1       ICLKSEL      LL_RCC_GetUSBClockSource
  * @param  USBx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_USB_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_USB_CLKSOURCE_HSI48
  *         @arg @ref LL_RCC_USB_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_USB_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_USB_CLKSOURCE_MSIK
  */
__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR1, USBx));
}

/**
  * @brief  Get ADCx clock source
  * @rmtoll CCIPR3       ADCDACSEL        LL_RCC_SetADCDACClockSource
  * @param  ADCxDAC1 This parameter can be one of the following values:
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_HCLK
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_ADCDAC_CLKSOURCE_HSE
  */
__STATIC_INLINE uint32_t LL_RCC_GetADCDACClockSource(uint32_t ADCxDAC1)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR3, ADCxDAC1));
}

/**
  * @brief  Get DFSDM Audio Clock Source
  * @rmtoll CCIPR3         ADF1SEL        LL_RCC_GetADF1ClockSource
  * @param  ADF1x This parameter can be one of the following values:
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_HCLK
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_PLL3
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_ADF1_CLKSOURCE_PIN
  */
__STATIC_INLINE uint32_t LL_RCC_GetADF1ClockSource(uint32_t ADF1x)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR3, ADF1x));
}

/**
  * @brief  Get DAC1 Clock Source
  * @rmtoll CCIPR3        DAC1SEL        LL_RCC_GetDAC1ClockSource
  * @param  DAC1x This parameter can be one of the following values:
  *         @arg @ref LL_RCC_DAC1_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_DAC1_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_DAC1_CLKSOURCE_LSI
  */
__STATIC_INLINE uint32_t LL_RCC_GetDAC1ClockSource(uint32_t DAC1x)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR3, DAC1x));
}

/**
  * @brief  Get MDF1 Clock Source
  * @rmtoll CCIPR2         MDF1SEL        LL_RCC_GetMDF1ClockSource
  * @param  MDF1x This parameter can be one of the following values:
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_HCLK
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_PLL3
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_MDF1_CLKSOURCE_PIN
  */
__STATIC_INLINE uint32_t LL_RCC_GetMDF1ClockSource(uint32_t MDF1x)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, MDF1x));
}

/**
  * @brief  Get OCTOSPI clock source
  * @rmtoll CCIPR2         OSPISEL        LL_RCC_GetOCTOSPIClockSource
  * @param  OCTOSPIx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_OCTOSPI_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_MSIK
  *         @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL2
  */
__STATIC_INLINE uint32_t LL_RCC_GetOCTOSPIClockSource(uint32_t OCTOSPIx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, OCTOSPIx));
}

#if defined (HSPI1)
/**
  * @brief  Get HSPI clock source
  * @rmtoll CCIPR2         HSPISEL        LL_RCC_GetHSPIClockSource
  * @param  HSPIx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_HSPI_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_HSPI_CLKSOURCE_SYSCLK
  *         @arg @ref LL_RCC_HSPI_CLKSOURCE_PLL1
  *         @arg @ref LL_RCC_HSPI_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_HSPI_CLKSOURCE_PLL3
  */
__STATIC_INLINE uint32_t LL_RCC_GetHSPIClockSource(uint32_t HSPIx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, HSPIx));
}
#endif /* HSPI1 */
/**
  * @}
  */

#if defined(SAES)
/**
  * @brief  Get SAES kernel clock source
  * @rmtoll CCIPR2       SAESSEL      LL_RCC_GetSAESClockSource
  * @param  SAESx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_SAES_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_SAES_CLKSOURCE_SHSI
  *         @arg @ref LL_RCC_SAES_CLKSOURCE_SHSI_DIV2
  */
__STATIC_INLINE uint32_t LL_RCC_GetSAESClockSource(uint32_t SAESx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, SAESx));
}
#endif /* SAES */

#if defined(DSI)
/**
  * @brief  Get DSI clock source
  * @rmtoll CCIPR2         DSISEL        LL_RCC_GetDSIClockSource
  * @param  DSIx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_DSI_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
  *         @arg @ref LL_RCC_DSI_CLKSOURCE_PLL3
  */
__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, DSIx));
}
#endif /* DSI */

#if defined(LTDC)
/**
  * @brief  Get LTDC clock source
  * @rmtoll CCIPR2         LTDCSEL        LL_RCC_GetLTDCClockSource
  * @param  LTDCx This parameter can be one of the following values:
  *         @arg @ref LL_RCC_LTDC_CLKSOURCE
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_LTDC_CLKSOURCE_PLL2
  *         @arg @ref LL_RCC_LTDC_CLKSOURCE_PLL3
  */
__STATIC_INLINE uint32_t LL_RCC_GetLTDCClockSource(uint32_t LTDCx)
{
  return (uint32_t)(READ_BIT(RCC->CCIPR2, LTDCx));
}
#endif /* LTDC */

/** @defgroup RCC_LL_EF_RTC RTC
  * @{
  */

/**
  * @brief  Set RTC Clock Source
  * @note Once the RTC clock source has been selected, it cannot be changed anymore unless
  *       the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is
  *       set). The BDRST bit can be used to reset them.
  * @rmtoll BDCR         RTCSEL        LL_RCC_SetRTCClockSource
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
  *         @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
  * @retval None
  */
__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source)
{
  MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source);
}

/**
  * @brief  Get RTC Clock Source
  * @rmtoll BDCR         RTCSEL        LL_RCC_GetRTCClockSource
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
  *         @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
  *         @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
  *         @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
  */
__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void)
{
  return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL));
}

/**
  * @brief  Enable RTC
  * @rmtoll BDCR         RTCEN         LL_RCC_EnableRTC
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableRTC(void)
{
  SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
}

/**
  * @brief  Disable RTC
  * @rmtoll BDCR         RTCEN         LL_RCC_DisableRTC
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableRTC(void)
{
  CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
}

/**
  * @brief  Check if RTC has been enabled or not
  * @rmtoll BDCR         RTCEN         LL_RCC_IsEnabledRTC
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void)
{
  return ((READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == RCC_BDCR_RTCEN) ? 1UL : 0UL);
}

/**
  * @brief  Force the Backup domain reset
  * @rmtoll BDCR         BDRST         LL_RCC_ForceBackupDomainReset
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void)
{
  SET_BIT(RCC->BDCR, RCC_BDCR_BDRST);
}

/**
  * @brief  Release the Backup domain reset
  * @rmtoll BDCR         BDRST         LL_RCC_ReleaseBackupDomainReset
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void)
{
  CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST);
}

/**
  * @}
  */


/** @defgroup RCC_LL_EF_PLL1 PLL1
  * @{
  */

/**
  * @brief  Enable PLL1
  * @rmtoll CR           PLL1ON         LL_RCC_PLL1_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_Enable(void)
{
  SET_BIT(RCC->CR, RCC_CR_PLL1ON);
}
#define LL_RCC_PLL_Enable     LL_RCC_PLL1_Enable    /*!< alias for compatibility with legacy code */

/**
  * @brief  Disable PLL1
  * @note Cannot be disabled if the PLL1 clock is used as the system clock
  * @rmtoll CR           PLLON         LL_RCC_PLL1_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_Disable(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON);
}
#define LL_RCC_PLL_Disable     LL_RCC_PLL1_Disable    /*!< alias for compatibility with legacy code */

/**
  * @brief  Check if PLL1 Ready
  * @rmtoll CR           PLL1RDY        LL_RCC_PLL1_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_IsReady(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_PLL1RDY) == RCC_CR_PLL1RDY) ? 1UL : 0UL);
}
#define LL_RCC_PLL_IsReady     LL_RCC_PLL1_IsReady    /*!< alias for compatibility with legacy code */

/**
  * @brief  Configure PLL1 used for SYSCLK Domain
  * @note PLL1 Source, PLLM, PLLN and PLLR can be written only when PLL1 is disabled.
  * @note PLLN/PLLR can be written only when PLL is disabled.
  * @rmtoll PLL1CFGR      PLL1SRC        LL_RCC_PLL1_ConfigDomain_SYS\n
  *         PLL1CFGR      PLL1M          LL_RCC_PLL1_ConfigDomain_SYS\n
  *         PLL1CFGR      PLL1N          LL_RCC_PLL1_ConfigDomain_SYS\n
  *         PLL1CFGR      PLL1R          LL_RCC_PLL1_ConfigDomain_SYS
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL1SOURCE_NONE
  *         @arg @ref LL_RCC_PLL1SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL1SOURCE_HSI
  *         @arg @ref LL_RCC_PLL1SOURCE_HSE
  * @param PLLM parameter can be a value between 1 and 16
  * @param PLLR parameter can be a value between 1 and 128 (Only division by 1 and even division are allowed)
  * @param PLLN parameter can be a value between 4 and 512
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
{
  MODIFY_REG(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1SRC | RCC_PLL1CFGR_PLL1M, Source | \
             ((PLLM - 1UL) << RCC_PLL1CFGR_PLL1M_Pos));
  MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1N | RCC_PLL1DIVR_PLL1R, ((PLLN - 1UL) << \
                                                                      RCC_PLL1DIVR_PLL1N_Pos) | ((PLLR - 1UL) << \
                                                                          RCC_PLL1DIVR_PLL1R_Pos));
}
#define LL_RCC_PLL_ConfigDomain_SYS     LL_RCC_PLL1_ConfigDomain_SYS    /*!< alias for compatibility with legacy code */

/**
  * @brief  Configure PLL1 used for SAI domain clock
  * @note PLL1 Source, PLLM, PLLN and PLLPDIV can be written only when PLL1 is disabled.
  * @note This can be selected for SAI1 or SAI2
  * @rmtoll PLLC1FGR      PLL1SRC        LL_RCC_PLL1_ConfigDomain_SAI\n
  *         PLLC1FGR      PLL1M          LL_RCC_PLL1_ConfigDomain_SAI\n
  *         PLLC1FGR      PLL1N          LL_RCC_PLL1_ConfigDomain_SAI\n
  *         PLLC1FGR      PLL1P          LL_RCC_PLL1_ConfigDomain_SAI
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL1SOURCE_NONE
  *         @arg @ref LL_RCC_PLL1SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL1SOURCE_HSI
  *         @arg @ref LL_RCC_PLL1SOURCE_HSE
  * @param PLLM parameter can be a value between 1 and 16
  * @param PLLN parameter can be a value between 4 and 512
  * @param PLLP parameter can be a value between 1 and 128
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
  MODIFY_REG(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1SRC | RCC_PLL1CFGR_PLL1M, Source | \
             ((PLLM - 1UL) << RCC_PLL1CFGR_PLL1M_Pos));
  MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1N | RCC_PLL1DIVR_PLL1P, ((PLLN - 1UL) << \
                                                                      RCC_PLL1DIVR_PLL1N_Pos) | ((PLLP - 1UL) << \
                                                                          RCC_PLL1DIVR_PLL1P_Pos));
}
#define LL_RCC_PLL_ConfigDomain_SAI     LL_RCC_PLL1_ConfigDomain_SAI    /*!< alias for compatibility with legacy code */

/**
  * @brief  Configure PLL1 used for 48Mhz domain clock
  * @note PLL1 Source, PLLM, PLLN and PLLQ can be written only when PLL1 is disabled.
  * @note This  can be selected for USB, SDMMC
  * @rmtoll PLL1CFGR      PLL1SRC        LL_RCC_PLL1_ConfigDomain_48M\n
  *         PLL1CFGR      PLL1M          LL_RCC_PLL1_ConfigDomain_48M\n
  *         PLL1CFGR      PLL1N          LL_RCC_PLL1_ConfigDomain_48M\n
  *         PLL1CFGR      PLL1Q          LL_RCC_PLL1_ConfigDomain_48M
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL1SOURCE_NONE
  *         @arg @ref LL_RCC_PLL1SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL1SOURCE_HSI
  *         @arg @ref LL_RCC_PLL1SOURCE_HSE
  * @param PLLM parameter can be a value between 1 and 16
  * @param PLLN parameter can be a value between 4 and 512
  * @param PLLQ parameter can be a value between 1 and 128
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
{
  MODIFY_REG(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1SRC | RCC_PLL1CFGR_PLL1M, Source | \
             ((PLLM - 1UL) << RCC_PLL1CFGR_PLL1M_Pos));
  MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1N | RCC_PLL1DIVR_PLL1Q, ((PLLN - 1UL) << \
                                                                      RCC_PLL1DIVR_PLL1N_Pos) | ((PLLQ - 1UL) << \
                                                                          RCC_PLL1DIVR_PLL1Q_Pos));
}
#define LL_RCC_PLL_ConfigDomain_48M     LL_RCC_PLL1_ConfigDomain_48M    /*!< alias for compatibility with legacy code */

/**
  * @brief  Configure PLL clock source
  * @rmtoll PLL1CFGR      PLL1SRC        LL_RCC_PLL1_SetMainSource
  * @param  PLL1Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL1SOURCE_NONE
  *         @arg @ref LL_RCC_PLL1SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL1SOURCE_HSI
  *         @arg @ref LL_RCC_PLL1SOURCE_HSE
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_SetMainSource(uint32_t PLL1Source)
{
  MODIFY_REG(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1SRC, PLL1Source);
}
#define LL_RCC_PLL_SetMainSource     LL_RCC_PLL1_SetMainSource    /*!< alias for compatibility with legacy code */

/**
  * @brief  Get the oscillator used as PLL1 clock source.
  * @rmtoll PLL1CFGR      PLL1SRC        LL_RCC_PLL1_GetMainSource
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_PLL1SOURCE_NONE
  *         @arg @ref LL_RCC_PLL1SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL1SOURCE_HSI
  *         @arg @ref LL_RCC_PLL1SOURCE_HSE
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_GetMainSource(void)
{
  return (uint32_t)(READ_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1SRC));
}
#define LL_RCC_PLL_GetMainSource     LL_RCC_PLL1_GetMainSource    /*!< alias for compatibility with legacy code */

/**
  * @brief  Set Main PLL1 multiplication factor for VCO
  * @rmtoll PLL1CFGR      PLL1N          LL_RCC_PLL1_SetN
  * @param PLL1N parameter can be a value between 4 and 512
  */
__STATIC_INLINE void LL_RCC_PLL1_SetN(uint32_t PLL1N)
{
  MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1N, (PLL1N - 1UL) << RCC_PLL1DIVR_PLL1N_Pos);
}
#define LL_RCC_PLL_SetN     LL_RCC_PLL1_SetN    /*!< alias for compatibility with legacy code */

/**
  * @brief  Get Main PLL1 multiplication factor for VCO
  * @rmtoll PLL1CFGR      PLL1N          LL_RCC_PLL1_GetN
  * @retval Between 4 and 512
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_GetN(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1N) >>  RCC_PLL1DIVR_PLL1N_Pos) + 1UL);
}
#define LL_RCC_PLL_GetN     LL_RCC_PLL1_GetN    /*!< alias for compatibility with legacy code */

/**
  * @brief  Set Main PLL1 division factor for PLL1P
  * @note Used for SAI1 and SAI2 clock
  * @rmtoll PLL1CFGR      PLL1P       LL_RCC_PLL1_SetP
  * @param PLL1P parameter can be a value between 1 and 128
  */
__STATIC_INLINE void LL_RCC_PLL1_SetP(uint32_t PLL1P)
{
  MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1P, (PLL1P - 1UL) << RCC_PLL1DIVR_PLL1P_Pos);
}
#define LL_RCC_PLL_SetP     LL_RCC_PLL1_SetP    /*!< alias for compatibility with legacy code */

/**
  * @brief  Get Main PLL1 division factor for PLL1P
  * @note Used for SAI1 and SAI2 clock
  * @rmtoll PLL1CFGR      PLL1P      LL_RCC_PLL1_GetP
  * @retval Between 1 and 128
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_GetP(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1P) >>  RCC_PLL1DIVR_PLL1P_Pos) + 1UL);
}
#define LL_RCC_PLL_GetP     LL_RCC_PLL1_GetP    /*!< alias for compatibility with legacy code */

/**
  * @brief  Set Main PLL division factor for PLLQ
  * @note Used for PLL48M1CLK selected for USB, SDMMC (48 MHz clock)
  * @rmtoll PLLCFGR      PLL1Q          LL_RCC_PLL1_SetQ
  * @param PLL1Q parameter can be a value between 1 and 128
  */
__STATIC_INLINE void LL_RCC_PLL1_SetQ(uint32_t PLL1Q)
{
  MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1Q, (PLL1Q - 1UL) << RCC_PLL1DIVR_PLL1Q_Pos);
}
#define LL_RCC_PLL_SetQ     LL_RCC_PLL1_SetQ    /*!< alias for compatibility with legacy code */

/**
  * @brief  Get Main PLL division factor for PLLQ
  * @note Used for PLL48M1CLK selected for USB, SDMMC (48 MHz clock)
  * @rmtoll PLL1CFGR      PLL1Q          LL_RCC_PLL1_GetQ
  * @retval Between 1 and 128
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_GetQ(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1Q) >>  RCC_PLL1DIVR_PLL1Q_Pos) + 1UL);
}
#define LL_RCC_PLL_GetQ     LL_RCC_PLL1_GetQ    /*!< alias for compatibility with legacy code */

/**
  * @brief  Set Main PLL division factor for PLL1R
  * @note Used for PLL1CLK selected for USB, SDMMC (48 MHz clock)
  * @rmtoll PLL1DIVR      PLL1R          LL_RCC_PLL1_SetR
  * @param PLL1R parameter can be a value between 1 and 128 (Only division by 1 and even division are allowed)
  */
__STATIC_INLINE void LL_RCC_PLL1_SetR(uint32_t PLL1R)
{
  MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1R, (PLL1R - 1UL) << RCC_PLL1DIVR_PLL1R_Pos);
}
#define LL_RCC_PLL_SetR     LL_RCC_PLL1_SetR    /*!< alias for compatibility with legacy code */

/**
  * @brief  Get Main PLL1 division factor for PLL1R
  * @note Used for PLL1CLK (system clock)
  * @rmtoll PLL1DIVR      PLL1R          LL_RCC_PLL1_GetR
  * @retval Between 1 and 128
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_GetR(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_PLL1R) >>  RCC_PLL1DIVR_PLL1R_Pos) + 1UL);
}
#define LL_RCC_PLL_GetR     LL_RCC_PLL1_GetR    /*!< alias for compatibility with legacy code */

/**
  * @brief  Set Division factor for the main PLL and other PLL
  * @rmtoll PLL1CFGR      PLL1M          LL_RCC_PLL1_SetDivider
  * @param PLL1M parameter can be a value between 1 and 16
  */
__STATIC_INLINE void LL_RCC_PLL1_SetDivider(uint32_t PLL1M)
{
  MODIFY_REG(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1M, (PLL1M - 1UL) << RCC_PLL1CFGR_PLL1M_Pos);
}
#define LL_RCC_PLL_SetDivider     LL_RCC_PLL1_SetDivider    /*!< alias for compatibility with legacy code */

/**
  * @brief  Get Division factor for the main PLL and other PLL
  * @rmtoll PLL1CFGR      PLL1M          LL_RCC_PLL1_GetDivider
  * @retval Between 1 and 16
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_GetDivider(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1M) >>  RCC_PLL1CFGR_PLL1M_Pos) + 1UL);
}
#define LL_RCC_PLL_GetDivider     LL_RCC_PLL1_GetDivider    /*!< alias for compatibility with legacy code */

/**
  * @brief  Enable PLL1 output mapped on SAI domain clock
  * @rmtoll PLL1CFGR      PLL1PEN        LL_RCC_PLL1_EnableDomain_SAI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_EnableDomain_SAI(void)
{
  SET_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1PEN);
}
#define LL_RCC_PLL_EnableDomain_SAI     LL_RCC_PLL1_EnableDomain_SAI    /*!< alias for compatibility with legacy code */

/**
  * @brief  Disable PLL1 output mapped on SAI domain clock
  * @note Cannot be disabled if the PLL1 clock is used as the system
  *       clock
  * @note In order to save power, when the PLL1CLK  of the PLL1 is
  *       not used,  should be 0
  * @rmtoll PLL1CFGR      PLL1PEN        LL_RCC_PLL1_DisableDomain_SAI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_DisableDomain_SAI(void)
{
  CLEAR_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1PEN);
}
#define LL_RCC_PLL_DisableDomain_SAI     LL_RCC_PLL1_DisableDomain_SAI    /*!< alias for compatibility with legacy code */

/**
  * @brief  Check if PLL1 output mapped on SAI domain clock is enabled
  * @rmtoll PLL1CFGR      PLL1PEN        LL_RCC_PLL1_IsEnabledDomain_SAI
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_IsEnabledDomain_SAI(void)
{
  return ((READ_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1PEN) == (RCC_PLL1CFGR_PLL1PEN)) ? 1UL : 0UL);
}
#define LL_RCC_PLL_IsEnabledDomain_SAI     LL_RCC_PLL1_IsEnabledDomain_SAI    /*!< alias for compatibility with legacy code */

/**
  * @brief  Enable PLL output mapped on 48MHz domain clock
  * @rmtoll PLL1CFGR      PLL1QEN        LL_RCC_PLL1_EnableDomain_48M
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_EnableDomain_48M(void)
{
  SET_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1QEN);
}

/**
  * @brief  Disable PLL1 output mapped on 48MHz domain clock
  * @note Cannot be disabled if the PLL clock is used as the system
  *       clock
  * @note In order to save power, when the PLL1CLK  of the PLL1 is
  *       not used,  should be 0
  * @rmtoll PLL1CFGR      PLL1QEN        LL_RCC_PLL1_DisableDomain_48M
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_DisableDomain_48M(void)
{
  CLEAR_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1QEN);
}
#define LL_RCC_PLL_DisableDomain_48M     LL_RCC_PLL1_DisableDomain_48M    /*!< alias for compatibility with legacy code */

/**
  * @brief  Check if PLL1 output mapped on 48M domain clock is enabled
  * @rmtoll PLL1CFGR      PLL1QEN        LL_RCC_PLL1_IsEnabledDomain_48M
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_IsEnabledDomain_48M(void)
{
  return ((READ_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1QEN) == (RCC_PLL1CFGR_PLL1QEN)) ? 1UL : 0UL);
}
#define LL_RCC_PLL_IsEnabledDomain_48M     LL_RCC_PLL1_IsEnabledDomain_48M    /*!< alias for compatibility with legacy code */

/**
  * @brief  Enable PLL1 output mapped on SYSCLK domain
  * @rmtoll PLL1CFGR      PLL1REN        LL_RCC_PLL1_EnableDomain_SYS
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_EnableDomain_SYS(void)
{
  SET_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1REN);
}
#define LL_RCC_PLL_EnableDomain_SYS     LL_RCC_PLL1_EnableDomain_SYS    /*!< alias for compatibility with legacy code */

/**
  * @brief  Disable PLL1 output mapped on SYSCLK domain
  * @note Cannot be disabled if the PLL1 clock is used as the system
  *       clock
  * @note In order to save power, when the PLL1CLK  of the PLL1 is
  *       not used, Main PLL1  should be 0
  * @rmtoll PLL1CFGR      PLL1REN        LL_RCC_PLL1_DisableDomain_SYS
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_DisableDomain_SYS(void)
{
  CLEAR_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1REN);
}
#define LL_RCC_PLL_DisableDomain_SYS     LL_RCC_PLL1_DisableDomain_SYS    /*!< alias for compatibility with legacy code */

/**
  * @brief  Check if PLL1 output mapped on SYS domain clock is enabled
  * @rmtoll PLL1CFGR      PLL1REN        LL_RCC_PLL1_IsEnabledDomain_SYS
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_IsEnabledDomain_SYS(void)
{
  return ((READ_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1REN) == (RCC_PLL1CFGR_PLL1REN)) ? 1UL : 0UL);
}
#define LL_RCC_PLL_IsEnabledDomain_SYS     LL_RCC_PLL1_IsEnabledDomain_SYS    /*!< alias for compatibility with legacy code */

/**
  * @brief  Enable PLL1 FRACN
  * @rmtoll PLL1CFGR           PLL1FRACEN         LL_RCC_PLL1FRACN_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1FRACN_Enable(void)
{
  SET_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1FRACEN);
}
#define LL_RCC_PLLFRACN_Enable     LL_RCC_PLL1FRACN_Enable    /*!< alias for compatibility with legacy code */

/**
  * @brief  Check if PLL1 FRACN is enabled
  * @rmtoll PLL1CFGR           PLL1FRACEN         LL_RCC_PLL1FRACN_IsEnabled
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1FRACN_IsEnabled(void)
{
  return ((READ_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1FRACEN) == RCC_PLL1CFGR_PLL1FRACEN) ? 1UL : 0UL);
}
#define LL_RCC_PLLFRACN_IsEnabled     LL_RCC_PLL1FRACN_IsEnabled    /*!< alias for compatibility with legacy code */

/**
  * @brief  Disable PLL1 FRACN
  * @rmtoll PLL1CFGR           PLL1FRACEN         LL_RCC_PLL1FRACN_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1FRACN_Disable(void)
{
  CLEAR_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1FRACEN);
}
#define LL_RCC_PLLFRACN_Disable     LL_RCC_PLL1FRACN_Disable    /*!< alias for compatibility with legacy code */

/**
  * @brief  Set PLL1 FRACN Coefficient
  * @rmtoll PLL1FRACR        PLL1FRACN        LL_RCC_PLL1_SetFRACN
  * @param  FRACN parameter can be a value between 0 and 8191 (0x1FFF)
  */
__STATIC_INLINE void LL_RCC_PLL1_SetFRACN(uint32_t FRACN)
{
  MODIFY_REG(RCC->PLL1FRACR, RCC_PLL1FRACR_PLL1FRACN, FRACN << RCC_PLL1FRACR_PLL1FRACN_Pos);
}
#define LL_RCC_PLL_SetFRACN     LL_RCC_PLL1_SetFRACN    /*!< alias for compatibility with legacy code */

/**
  * @brief  Get PLL1 FRACN Coefficient
  * @rmtoll PLL1FRACR      PLL1FRACN          LL_RCC_PLL1_GetFRACN
  * @retval A value between 0 and 8191 (0x1FFF)
  */
__STATIC_INLINE uint32_t LL_RCC_PLL1_GetFRACN(void)
{
  return (uint32_t)(READ_BIT(RCC->PLL1FRACR, RCC_PLL1FRACR_PLL1FRACN) >>  RCC_PLL1FRACR_PLL1FRACN_Pos);
}
#define LL_RCC_PLL_GetFRACN     LL_RCC_PLL1_GetFRACN    /*!< alias for compatibility with legacy code */

/**
  * @brief  Set PLL1 VCO Input Range
  * @note   This API shall be called only when PLL1 is disabled.
  * @rmtoll PLL1CFGR        PLL1RGE       LL_RCC_PLL1_SetVCOInputRange
  * @param  InputRange This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLLINPUTRANGE_4_8
  *         @arg @ref LL_RCC_PLLINPUTRANGE_8_16
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL1_SetVCOInputRange(uint32_t InputRange)
{
  MODIFY_REG(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1RGE, InputRange);
}
#define LL_RCC_PLL_SetVCOInputRange     LL_RCC_PLL1_SetVCOInputRange    /*!< alias for compatibility with legacy code */

/**
  * @brief  Set PLL1 EPOD Prescaler booster input clock
  * @rmtoll PLL1CFGR       PLL1MBOOST      LL_RCC_SetPll1EPodPrescaler
  * @param  BoostDiv This parameter can be one of the following values:
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_1
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_2
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_4
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_6
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_8
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_10
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_12
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_14
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_16
  */
__STATIC_INLINE void LL_RCC_SetPll1EPodPrescaler(uint32_t BoostDiv)
{
  MODIFY_REG(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1MBOOST, BoostDiv);
}

/**
  * @brief  Get PLL1 EPOD Prescaler booster input clock
  * @rmtoll PLL1CFGR       PLL1MBOOST      LL_RCC_GetPll1EPodPrescaler
  * @retval Returned value can be one of the following values:
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_1
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_2
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_4
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_6
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_8
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_10
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_12
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_14
  *         @arg @ref   LL_RCC_PLL1MBOOST_DIV_16
  */
__STATIC_INLINE uint32_t LL_RCC_GetPll1EPodPrescaler(void)
{
  return (uint32_t)(READ_BIT(RCC->PLL1CFGR, RCC_PLL1CFGR_PLL1MBOOST));
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_PLL2 PLL2
  * @{
  */

/**
  * @brief  Enable PLL2
  * @rmtoll CR           PLL2ON     LL_RCC_PLL2_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_Enable(void)
{
  SET_BIT(RCC->CR, RCC_CR_PLL2ON);
}

/**
  * @brief  Disable PLL2
  * @rmtoll CR           PLL2ON     LL_RCC_PLL2_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_Disable(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON);
}

/**
  * @brief  Check if PLL2 Ready
  * @rmtoll CR           PLL2RDY    LL_RCC_PLL2_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_IsReady(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_PLL2RDY) == RCC_CR_PLL2RDY) ? 1UL : 0UL);
}

/**
  * @brief  Configure PLL2 used for 48Mhz domain clock
  * @note PLL2 Source, PLLM, PLLN and PLLQ can be written only when PLL2 is disabled.
  * @note This  can be selected for USB, SDMMC
  * @rmtoll PLL2CFGR      PLL2SRC        LL_RCC_PLL2_ConfigDomain_48M\n
  *         PLL2CFGR      PLL2M          LL_RCC_PLL2_ConfigDomain_48M\n
  *         PLL2CFGR      PLL2N          LL_RCC_PLL2_ConfigDomain_48M\n
  *         PLL2CFGR      PLL2Q          LL_RCC_PLL2_ConfigDomain_48M
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL2SOURCE_NONE
  *         @arg @ref LL_RCC_PLL2SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL2SOURCE_HSI
  *         @arg @ref LL_RCC_PLL2SOURCE_HSE
  * @param PLLM parameter can be a value between 1 and 16
  * @param PLLN parameter can be a value between 4 and 512
  * @param PLLQ parameter can be a value between 1 and 128
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
{
  MODIFY_REG(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2SRC | RCC_PLL2CFGR_PLL2M, Source | \
             ((PLLM - 1UL) << RCC_PLL2CFGR_PLL2M_Pos));
  MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2N | RCC_PLL2DIVR_PLL2Q, ((PLLN - 1UL) << \
                                                                      RCC_PLL2DIVR_PLL2N_Pos) | ((PLLQ - 1UL) << \
                                                                          RCC_PLL2DIVR_PLL2Q_Pos));
}

/**
  * @brief  Configure PLL2 used for SAI domain clock
  * @note PLL1 Source, PLLM, PLLN and PLL2P can be written only when PLL1 is disabled.
  * @note This can be selected for SAI1 or SAI2
  * @rmtoll PLLC2FGR      PLL2SRC        LL_RCC_PLL2_ConfigDomain_SAI\n
  *         PLLC2FGR      PLL2M          LL_RCC_PLL2_ConfigDomain_SAI\n
  *         PLLC2FGR      PLL2N          LL_RCC_PLL2_ConfigDomain_SAI\n
  *         PLLC2FGR      PLL2P          LL_RCC_PLL2_ConfigDomain_SAI
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL2SOURCE_NONE
  *         @arg @ref LL_RCC_PLL2SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL2SOURCE_HSI
  *         @arg @ref LL_RCC_PLL2SOURCE_HSE
  * @param PLLM parameter can be a value between 1 and 16
  * @param PLLN parameter can be a value between 4 and 512
  * @param PLLP parameter can be a value between 1 and 128
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
  MODIFY_REG(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2SRC | RCC_PLL2CFGR_PLL2M, Source | \
             ((PLLM - 1UL) << RCC_PLL2CFGR_PLL2M_Pos));
  MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2N | RCC_PLL2DIVR_PLL2P, ((PLLN - 1UL) << \
                                                                      RCC_PLL2DIVR_PLL2N_Pos) | ((PLLP - 1UL) << \
                                                                          RCC_PLL2DIVR_PLL2P_Pos));
}

/**
  * @brief  Configure PLL2 used for ADC domain clock
  * @note PLL2SRC/PLL2M/PLL2N/PLL2R can be written only when PLL2 is disabled.
  * @note This  can be selected for ADC
  * @rmtoll PLL2CFGR  PLL2SRC    LL_RCC_PLL2_ConfigDomain_ADC\n
  *         PLL2CFGR  PLL2M      LL_RCC_PLL2_ConfigDomain_ADC\n
  *         PLL2CFGR  PLL2N      LL_RCC_PLL2_ConfigDomain_ADC\n
  *         PLL2CFGR  PLL2R      LL_RCC_PLL2_ConfigDomain_ADC
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL2SOURCE_NONE
  *         @arg @ref LL_RCC_PLL2SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL2SOURCE_HSI
  *         @arg @ref LL_RCC_PLL2SOURCE_HSE
  * @param PLLM parameter can be a value between 1 and 16
  * @param PLLR parameter can be a value between 1 and 128
  * @param PLLN parameter can be a value between 4 and 512
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
{
  MODIFY_REG(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2SRC | RCC_PLL2CFGR_PLL2M, Source | \
             ((PLLM - 1UL) << RCC_PLL2CFGR_PLL2M_Pos));
  MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2N | RCC_PLL2DIVR_PLL2R, ((PLLN - 1UL) << \
                                                                      RCC_PLL2DIVR_PLL2N_Pos) | ((PLLR - 1UL) << \
                                                                          RCC_PLL2DIVR_PLL2R_Pos));
}

/**
  * @brief  Configure PLL2 clock source
  * @rmtoll PLL2CFGR      PLL2SRC        LL_RCC_PLL2_SetSource
  * @param  PLL2Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL2SOURCE_NONE
  *         @arg @ref LL_RCC_PLL2SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL2SOURCE_HSI
  *         @arg @ref LL_RCC_PLL2SOURCE_HSE
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_SetSource(uint32_t PLL2Source)
{
  MODIFY_REG(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2SRC, PLL2Source);
}

/**
  * @brief  Get the oscillator used as PLL2 clock source.
  * @rmtoll PLL2CFGR      PLL2SRC        LL_RCC_PLL2_GetSource
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_PLL2SOURCE_NONE
  *         @arg @ref LL_RCC_PLL2SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL2SOURCE_HSI
  *         @arg @ref LL_RCC_PLL2SOURCE_HSE
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_GetSource(void)
{
  return (uint32_t)(READ_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2SRC));
}

/**
  * @brief  Set Main PLL2 multiplication factor for VCO
  * @rmtoll PLL2CFGR      PLL2N          LL_RCC_PLL2_SetN
  * @param PLL2N parameter can be a value between 4 and 512
  */
__STATIC_INLINE void LL_RCC_PLL2_SetN(uint32_t PLL2N)
{
  MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2N, (PLL2N - 1UL) << RCC_PLL2DIVR_PLL2N_Pos);
}

/**
  * @brief  Get Main PLL2 multiplication factor for VCO
  * @rmtoll PLL2CFGR      PLL2N          LL_RCC_PLL2_GetN
  * @retval Between 4 and 512
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_GetN(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2N) >>  RCC_PLL2DIVR_PLL2N_Pos) + 1UL);
}


/**
  * @brief  Set Main PLL2 division factor for PLL2P
  * @note Used for SAI1 and SAI2 clock
  * @rmtoll PLL2CFGR      PLL2P       LL_RCC_PLL2_SetP
  * @param PLL2P parameter can be a value between 1 and 128
  */
__STATIC_INLINE void LL_RCC_PLL2_SetP(uint32_t PLL2P)
{
  MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2P, (PLL2P - 1UL) << RCC_PLL2DIVR_PLL2P_Pos);
}

/**
  * @brief  Get Main PLL2 division factor for PLL2P
  * @note Used for SAI1 and SAI2 clock
  * @rmtoll PLL2CFGR      PLL2P      LL_RCC_PLL2_GetP
  * @retval Between 1 and 128
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_GetP(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2P) >>  RCC_PLL2DIVR_PLL2P_Pos) + 1UL);
}


/**
  * @brief  Set Main PLL division factor for PLLQ
  * @note Used for PLL48M1CLK selected for USB, SDMMC (48 MHz clock)
  * @rmtoll PLLCFGR      PLL2Q          LL_RCC_PLL2_SetQ
  * @param PLL2Q parameter can be a value between 1 and 128
  */
__STATIC_INLINE void LL_RCC_PLL2_SetQ(uint32_t PLL2Q)
{
  MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2Q, (PLL2Q - 1UL) << RCC_PLL2DIVR_PLL2Q_Pos);
}

/**
  * @brief  Get Main PLL division factor for PLLQ
  * @note Used for PLL48M1CLK selected for USB, SDMMC (48 MHz clock)
  * @rmtoll PLL2CFGR      PLL2Q          LL_RCC_PLL2_GetQ
  * @retval Between 1 and 128
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_GetQ(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2Q) >>  RCC_PLL2DIVR_PLL2Q_Pos) + 1UL);
}

/**
  * @brief  Set Main PLL division factor for PLLQ
  * @note Used for PLL2CLK selected for USB, SDMMC (48 MHz clock)
  * @rmtoll PLL2CFGR      PLL2R          LL_RCC_PLL2_SetR
  * @param PLL2R parameter can be a value between 1 and 128
  */
__STATIC_INLINE void  LL_RCC_PLL2_SetR(uint32_t PLL2R)
{
  MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2R, (PLL2R - 1UL) << RCC_PLL2DIVR_PLL2R_Pos);
}

/**
  * @brief  Get Main PLL2 division factor for PLL2R
  * @note Used for PLL2CLK (system clock)
  * @rmtoll PLL2DIVR      PLL2R          LL_RCC_PLL2_GetR
  * @retval Between 1 and 128
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_GetR(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_PLL2Q) >>  RCC_PLL2DIVR_PLL2Q_Pos) + 1UL);
}

/**
  * @brief  Set Division factor for the main PLL and other PLL
  * @rmtoll PLL2CFGR      PLL2M          LL_RCC_PLL2_SetDivider
  * @param PLL2M parameter can be a value between 1 and 16
  */
__STATIC_INLINE void LL_RCC_PLL2_SetDivider(uint32_t PLL2M)
{
  MODIFY_REG(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2M, (PLL2M - 1UL) << RCC_PLL2CFGR_PLL2M_Pos);
}

/**
  * @brief  Get Division factor for the main PLL and other PLL
  * @rmtoll PLL2CFGR      PLL2M          LL_RCC_PLL2_GetDivider
  * @retval Between 1 and 16
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_GetDivider(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2M) >>  RCC_PLL2CFGR_PLL2M_Pos) + 1UL);
}

/**
  * @brief  Enable PLL2 output mapped on SAI domain clock
  * @rmtoll PLL2CFGR  PLL2PEN    LL_RCC_PLL2_EnableDomain_SAI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_EnableDomain_SAI(void)
{
  SET_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2PEN);
}

/**
  * @brief  Disable PLL2 output mapped on SAI domain clock
  * @note In order to save power, when  of the PLL2 is
  *       not used,  should be 0
  * @rmtoll PLL2CFGR  PLL2PEN    LL_RCC_PLL2_DisableDomain_SAI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_DisableDomain_SAI(void)
{
  CLEAR_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2PEN);
}

/**
  * @brief  Check if PLL2 output mapped on SAI domain clock is enabled
  * @rmtoll PLL2CFGR      PLL2PEN        LL_RCC_PLL2_IsEnabledDomain_SAI
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_IsEnabledDomain_SAI(void)
{
  return ((READ_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2PEN) == (RCC_PLL2CFGR_PLL2PEN)) ? 1UL : 0UL);
}

/**
  * @brief  Enable PLL2 output mapped on 48MHz domain clock
  * @rmtoll PLL2CFGR  PLL2QEN    LL_RCC_PLL2_EnableDomain_48M
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_EnableDomain_48M(void)
{
  SET_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2QEN);
}

/**
  * @brief  Disable PLL2 output mapped on 48MHz domain clock
  * @note In order to save power, when  of the PLL2 48M is
  *       not used,  should be 0
  * @rmtoll PLL2CFGR  PLL2QEN    LL_RCC_PLL2_DisableDomain_48M
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_DisableDomain_48M(void)
{
  CLEAR_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2QEN);
}

/**
  * @brief  Check if PLL2 output mapped on 48M domain clock is enabled
  * @rmtoll PLL2CFGR      PLL2QEN        LL_RCC_PLL2_IsEnabledDomain_48M
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_IsEnabledDomain_48M(void)
{
  return ((READ_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2QEN) == (RCC_PLL2CFGR_PLL2QEN)) ? 1UL : 0UL);
}

/**
  * @brief  Enable PLL2 output mapped on ADC domain clock
  * @rmtoll PLL2CFGR  PLL2REN    LL_RCC_PLL2_EnableDomain_ADC
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_EnableDomain_ADC(void)
{
  SET_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2REN);
}

/**
  * @brief  Disable PLL2 output mapped on ADC domain clock
  * @note In order to save power, when  of the PLL2 ADC is
  *       not used, Main PLL2ADC  should be 0
  * @rmtoll PLL2CFGR  PLL2REN    LL_RCC_PLL2_DisableDomain_ADC
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_DisableDomain_ADC(void)
{
  CLEAR_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2REN);
}

/**
  * @brief  Check if PLL2 output mapped on ADC domain clock is enabled
  * @rmtoll PLL2CFGR      PLL2REN        LL_RCC_PLL2_IsEnabledDomain_ADC
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_IsEnabledDomain_ADC(void)
{
  return ((READ_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2REN) == (RCC_PLL2CFGR_PLL2REN)) ? 1UL : 0UL);
}

/**
  * @brief  Enable PLL2 FRACN
  * @rmtoll PLL2CFGR           PLL2FRACEN         LL_RCC_PLL2FRACN_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2FRACN_Enable(void)
{
  SET_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2FRACEN);
}

/**
  * @brief  Check if PLL2 FRACN is enabled
  * @rmtoll PLL2CFGR           PLL2FRACEN         LL_RCC_PLL2FRACN_IsEnabled
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2FRACN_IsEnabled(void)
{
  return ((READ_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2FRACEN) == RCC_PLL2CFGR_PLL2FRACEN) ? 1UL : 0UL);
}

/**
  * @brief  Disable PLL2 FRACN
  * @rmtoll PLL2CFGR           PLL2FRACEN         LL_RCC_PLL2FRACN_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2FRACN_Disable(void)
{
  CLEAR_BIT(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2FRACEN);
}

/**
  * @brief  Set PLL2 FRACN Coefficient
  * @rmtoll PLL2FRACR        PLL2FRACN        LL_RCC_PLL2_SetFRACN
  * @param  FRACN parameter can be a value between 0 and 8191 (0x1FFF)
  */
__STATIC_INLINE void LL_RCC_PLL2_SetFRACN(uint32_t FRACN)
{
  MODIFY_REG(RCC->PLL2FRACR, RCC_PLL2FRACR_PLL2FRACN, FRACN << RCC_PLL2FRACR_PLL2FRACN_Pos);
}

/**
  * @brief  Get PLL2 FRACN Coefficient
  * @rmtoll PLL2FRACR      PLL2FRACN          LL_RCC_PLL2_GetFRACN
  * @retval A value between 0 and 8191 (0x1FFF)
  */
__STATIC_INLINE uint32_t LL_RCC_PLL2_GetFRACN(void)
{
  return (uint32_t)(READ_BIT(RCC->PLL2FRACR, RCC_PLL2FRACR_PLL2FRACN) >>  RCC_PLL2FRACR_PLL2FRACN_Pos);
}

/**
  * @brief  Set PLL2 VCO Input Range
  * @note   This API shall be called only when PLL2 is disabled.
  * @rmtoll PLL2CFGR        PLL2RGE       LL_RCC_PLL2_SetVCOInputRange
  * @param  InputRange This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLLINPUTRANGE_4_8
  *         @arg @ref LL_RCC_PLLINPUTRANGE_8_16
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL2_SetVCOInputRange(uint32_t InputRange)
{
  MODIFY_REG(RCC->PLL2CFGR, RCC_PLL2CFGR_PLL2RGE, InputRange);
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_PLL3 PLL3
  * @{
  */

/**
  * @brief  Enable PLL3
  * @rmtoll CR           PLL3ON     LL_RCC_PLL3_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_Enable(void)
{
  SET_BIT(RCC->CR, RCC_CR_PLL3ON);
}

/**
  * @brief  Disable PLL3
  * @rmtoll CR           PLL3ON     LL_RCC_PLL3_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_Disable(void)
{
  CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON);
}

/**
  * @brief  Check if PLL3 Ready
  * @rmtoll CR           PLL3RDY    LL_RCC_PLL3_IsReady
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_IsReady(void)
{
  return ((READ_BIT(RCC->CR, RCC_CR_PLL3RDY) == RCC_CR_PLL3RDY) ? 1UL : 0UL);
}

/**
  * @brief  Configure PLL3 used for SAI domain clock
  * @note PLL3SRC/PLL3M/PLL3N/PLL3PDIV can be written only when PLL3 is disabled.
  * @note This  can be selected for SAI1 or SAI2
  * @rmtoll PLL3CFGR  PLL3SRC    LL_RCC_PLL3_ConfigDomain_SAI\n
  *         PLL3CFGR  PLL3M      LL_RCC_PLL3_ConfigDomain_SAI\n
  *         PLL3CFGR  PLL3N      LL_RCC_PLL3_ConfigDomain_SAI\n
  *         PLL3DIVR  PLL3P      LL_RCC_PLL3_ConfigDomain_SAI
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL3SOURCE_NONE
  *         @arg @ref LL_RCC_PLL3SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL3SOURCE_HSI
  *         @arg @ref LL_RCC_PLL3SOURCE_HSE
  * @param PLLM parameter can be a value between 1 and 16
  * @param PLLN parameter can be a value between 4 and 512
  * @param PLLP parameter can be a value between 1 and 128
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
  MODIFY_REG(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3SRC | RCC_PLL3CFGR_PLL3M, Source | \
             ((PLLM - 1UL) << RCC_PLL3CFGR_PLL3M_Pos));
  MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3N | RCC_PLL3DIVR_PLL3P, ((PLLN - 1UL) << \
                                                                      RCC_PLL3DIVR_PLL3N_Pos) | ((PLLP - 1UL) << \
                                                                          RCC_PLL3DIVR_PLL3P_Pos));
}


/**
  * @brief  Configure PLL3 used for 48Mhz domain clock
  * @note PLL3 Source, PLLM, PLLN and PLLQ can be written only when PLL3 is disabled.
  * @note This  can be selected for USB, SDMMC
  * @rmtoll PLL3CFGR      PLL3SRC        LL_RCC_PLL3_ConfigDomain_48M\n
  *         PLL3CFGR      PLL3M          LL_RCC_PLL3_ConfigDomain_48M\n
  *         PLL3CFGR      PLL3N          LL_RCC_PLL3_ConfigDomain_48M\n
  *         PLL3CFGR      PLL3Q          LL_RCC_PLL3_ConfigDomain_48M
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL3SOURCE_NONE
  *         @arg @ref LL_RCC_PLL3SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL3SOURCE_HSI
  *         @arg @ref LL_RCC_PLL3SOURCE_HSE
  * @param PLLM parameter can be a value between 1 and 16
  * @param PLLN parameter can be a value between 4 and 512
  * @param PLLQ parameter can be a value between 1 and 128
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
{
  MODIFY_REG(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3SRC | RCC_PLL3CFGR_PLL3M, Source | \
             ((PLLM - 1UL) << RCC_PLL3CFGR_PLL3M_Pos));
  MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3N | RCC_PLL3DIVR_PLL3Q, ((PLLN - 1UL) << \
                                                                      RCC_PLL3DIVR_PLL3N_Pos) | ((PLLQ - 1UL) << \
                                                                          RCC_PLL3DIVR_PLL3Q_Pos));
}


#if defined(LTDC) || defined(HSPI1)

/**
  * @brief  Configure PLL3 used for HSPI_LTDC domain clock
  * @note PLL3 Source, PLLM, PLLN and PLLR can be written only when PLL3 is disabled.
  * @note This  can be selected for HSPI and LTDC
  * @rmtoll PLL3CFGR      PLL3SRC        LL_RCC_PLL3_ConfigDomain_HSPI_LTDC\n
  *         PLL3CFGR      PLL3M          LL_RCC_PLL3_ConfigDomain_HSPI_LTDC\n
  *         PLL3CFGR      PLL3N          LL_RCC_PLL3_ConfigDomain_HSPI_LTDC\n
  *         PLL3CFGR      PLL3R          LL_RCC_PLL3_ConfigDomain_HSPI_LTDC
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL3SOURCE_NONE
  *         @arg @ref LL_RCC_PLL3SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL3SOURCE_HSI
  *         @arg @ref LL_RCC_PLL3SOURCE_HSE
  * @param PLLM parameter can be a value between 1 and 16
  * @param PLLN parameter can be a value between 4 and 512
  * @param PLLR parameter can be a value between 1 and 128
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_ConfigDomain_HSPI_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
{
  MODIFY_REG(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3SRC | RCC_PLL3CFGR_PLL3M, Source | \
             ((PLLM - 1UL) << RCC_PLL3CFGR_PLL3M_Pos));
  MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3N | RCC_PLL3DIVR_PLL3R, ((PLLN - 1UL) << \
                                                                      RCC_PLL3DIVR_PLL3N_Pos) | ((PLLR - 1UL) << \
                                                                          RCC_PLL3DIVR_PLL3R_Pos));
}

#endif /* LTDC || HSPI1 */

/**
  * @brief  Configure PLL3 clock source
  * @rmtoll PLL3CFGR      PLL3SRC        LL_RCC_PLL3_SetSource
  * @param  PLLSource This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLL3SOURCE_NONE
  *         @arg @ref LL_RCC_PLL3SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL3SOURCE_HSI
  *         @arg @ref LL_RCC_PLL3SOURCE_HSE
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_SetSource(uint32_t PLLSource)
{
  MODIFY_REG(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3SRC, PLLSource);
}

/**
  * @brief  Get the oscillator used as PLL3 clock source.
  * @rmtoll PLL3CFGR      PLL3SRC        LL_RCC_PLL3_GetSource
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_RCC_PLL3SOURCE_NONE
  *         @arg @ref LL_RCC_PLL3SOURCE_MSIS
  *         @arg @ref LL_RCC_PLL3SOURCE_HSI
  *         @arg @ref LL_RCC_PLL3SOURCE_HSE
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_GetSource(void)
{
  return (uint32_t)(READ_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3SRC));
}

/**
  * @brief  Set Main PLL3 multiplication factor for VCO
  * @rmtoll PLL3CFGR      PLL3N          LL_RCC_PLL3_SetN
  * @param PLL3N parameter can be a value between 4 and 512
  */
__STATIC_INLINE void LL_RCC_PLL3_SetN(uint32_t PLL3N)
{
  MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3N, (PLL3N - 1UL) << RCC_PLL3DIVR_PLL3N_Pos);
}

/**
  * @brief  Get Main PLL3 multiplication factor for VCO
  * @rmtoll PLL3CFGR      PLL3N          LL_RCC_PLL3_GetN
  * @retval Between 4 and 512
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_GetN(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3N) >>  RCC_PLL3DIVR_PLL3N_Pos) + 1UL);
}


/**
  * @brief  Set Main PLL3 division factor for PLL3P
  * @note Used for SAI1 and SAI2 clock
  * @rmtoll PLL3CFGR      PLL3P       LL_RCC_PLL3_SetP
  * @param PLL3P parameter can be a value between 1 and 128
  */
__STATIC_INLINE void LL_RCC_PLL3_SetP(uint32_t PLL3P)
{
  MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3P, (PLL3P - 1UL) << RCC_PLL3DIVR_PLL3P_Pos);
}

/**
  * @brief  Get Main PLL3 division factor for PLL3P
  * @note Used for SAI1 and SAI2 clock
  * @rmtoll PLL3CFGR      PLL3P      LL_RCC_PLL3_GetP
  * @retval Between 1 and 128
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_GetP(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3P) >>  RCC_PLL3DIVR_PLL3P_Pos) + 1UL);
}


/**
  * @brief  Set Main PLL division factor for PLLQ
  * @note Used for PLL48M1CLK selected for USB, SDMMC (48 MHz clock)
  * @rmtoll PLLCFGR      PLL3Q          LL_RCC_PLL3_SetQ
  * @param PLL3Q parameter can be a value between 1 and 128
  */
__STATIC_INLINE void LL_RCC_PLL3_SetQ(uint32_t PLL3Q)
{
  MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3Q, (PLL3Q - 1UL) << RCC_PLL3DIVR_PLL3Q_Pos);
}

/**
  * @brief  Get Main PLL division factor for PLLQ
  * @note Used for PLL48M1CLK selected for USB, SDMMC (48 MHz clock)
  * @rmtoll PLL3CFGR      PLL3Q          LL_RCC_PLL3_GetQ
  * @retval Between 1 and 128
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_GetQ(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3Q) >>  RCC_PLL3DIVR_PLL3Q_Pos) + 1UL);
}

/**
  * @brief  Set Main PLL division factor for PLLQ
  * @note Used for PLL3CLK selected for USB, SDMMC (48 MHz clock)
  * @rmtoll PLL3CFGR      PLL3R          LL_RCC_PLL3_SetR
  * @param PLL3R parameter can be a value between 1 and 128
  */
__STATIC_INLINE void LL_RCC_PLL3_SetR(uint32_t PLL3R)
{
  MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3R, (PLL3R - 1UL) << RCC_PLL3DIVR_PLL3R_Pos);
}

/**
  * @brief  Get Main PLL3 division factor for PLL3R
  * @note Used for PLL3CLK (system clock)
  * @rmtoll PLL3DIVR      PLL3R          LL_RCC_PLL3_GetR
  * @retval Between 1 and 128
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_GetR(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_PLL3R) >>  RCC_PLL3DIVR_PLL3R_Pos) + 1UL);
}

/**
  * @brief  Set Division factor for the main PLL and other PLL
  * @rmtoll PLL3CFGR      PLL3M          LL_RCC_PLL3_SetDivider
  * @param PLL3M parameter can be a value between 1 and 16
  */
__STATIC_INLINE void LL_RCC_PLL3_SetDivider(uint32_t PLL3M)
{
  MODIFY_REG(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3M, (PLL3M - 1UL) << RCC_PLL3CFGR_PLL3M_Pos);
}

/**
  * @brief  Get Division factor for the main PLL and other PLL
  * @rmtoll PLL3CFGR      PLL3M          LL_RCC_PLL3_GetDivider
  * @retval Between 1 and 16
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_GetDivider(void)
{
  return (uint32_t)((READ_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3M) >> RCC_PLL3CFGR_PLL3M_Pos) + 1UL);
}

/**
  * @brief  Enable PLL3 output mapped on SAI domain clock
  * @rmtoll PLL3CFGR  PLL3PEN    LL_RCC_PLL3_EnableDomain_SAI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_EnableDomain_SAI(void)
{
  SET_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3PEN);
}

/**
  * @brief  Disable PLL3 output mapped on SAI domain clock
  * @note In order to save power, when  of the PLLSAI2 is
  *       not used,  should be 0
  * @rmtoll PLL3CFGR  PLL3PEN    LL_RCC_PLL3_DisableDomain_SAI
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_DisableDomain_SAI(void)
{
  CLEAR_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3PEN);
}

/**
  * @brief  Check if PLL3 output mapped on SAI domain clock is enabled
  * @rmtoll PLL3CFGR      PLL3PEN        LL_RCC_PLL3_IsEnabledDomain_SAI
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_IsEnabledDomain_SAI(void)
{
  return ((READ_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3PEN) == (RCC_PLL3CFGR_PLL3PEN)) ? 1UL : 0UL);
}

/**
  * @brief  Enable PLL2 output mapped on 48MHz domain clock
  * @rmtoll PLL3CFGR  PLL3QEN    LL_RCC_PLL3_EnableDomain_48M
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_EnableDomain_48M(void)
{
  SET_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3QEN);
}

/**
  * @brief  Disable PLL3 output mapped on 48MHz domain clock
  * @note In order to save power, when  of the PLL3 is
  *       not used,  should be 0
  * @rmtoll PLL3CFGR  PLL3QEN    LL_RCC_PLL3_DisableDomain_48M
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_DisableDomain_48M(void)
{
  CLEAR_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3QEN);
}

/**
  * @brief  Check if PLL3 output mapped on 48M domain clock is enabled
  * @rmtoll PLL3CFGR      PLL3QEN        LL_RCC_PLL3_IsEnabledDomain_48M
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_IsEnabledDomain_48M(void)
{
  return ((READ_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3QEN) == (RCC_PLL3CFGR_PLL3QEN)) ? 1UL : 0UL);
}

#if defined(LTDC) || defined(HSPI1)

/**
  * @brief  Enable PLL3 output mapped on HSPI_LTDC domain clock
  * @rmtoll PLL3CFGR  PLL3REN    LL_RCC_PLL3_EnableDomain_HSPI_LTDC
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_EnableDomain_HSPI_LTDC(void)
{
  SET_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3REN);
}

/**
  * @brief  Disable PLL3 output mapped on HSPI_LTDC domain clock
  * @note In order to save power, when  of the PLL3 is
  *       not used,  should be 0
  * @rmtoll PLL3CFGR  PLL3REN    LL_RCC_PLL3_DisableDomain_HSPI_LTDC
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_DisableDomain_HSPI_LTDC(void)
{
  CLEAR_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3REN);
}

/**
  * @brief  Check if PLL3 output mapped on HSPI_LTDC domain clock is enabled
  * @rmtoll PLL3CFGR      PLL3REN        LL_RCC_PLL3_IsEnabledDomain_HSPI_LTDC
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_IsEnabledDomain_HSPI_LTDC(void)
{
  return ((READ_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3REN) == (RCC_PLL3CFGR_PLL3REN)) ? 1UL : 0UL);
}

#endif /* LTDC || HSPI1 */


/**
  * @brief  Enable PLL3 FRACN
  * @rmtoll PLL3CFGR           PLL3FRACEN         LL_RCC_PLL3FRACN_Enable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3FRACN_Enable(void)
{
  SET_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3FRACEN);
}

/**
  * @brief  Check if PLL3 FRACN is enabled
  * @rmtoll PLL3CFGR           PLL3FRACEN         LL_RCC_PLL3FRACN_IsEnabled
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3FRACN_IsEnabled(void)
{
  return ((READ_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3FRACEN) == RCC_PLL3CFGR_PLL3FRACEN) ? 1UL : 0UL);
}

/**
  * @brief  Disable PLL3 FRACN
  * @rmtoll PLL3CFGR           PLL3FRACEN         LL_RCC_PLL3FRACN_Disable
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3FRACN_Disable(void)
{
  CLEAR_BIT(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3FRACEN);
}

/**
  * @brief  Set PLL3 FRACN Coefficient
  * @rmtoll PLL3FRACR        PLL3FRACN        LL_RCC_PLL3_SetFRACN
  * @param  FRACN parameter can be a value between 0 and 8191 (0x1FFF)
  */
__STATIC_INLINE void LL_RCC_PLL3_SetFRACN(uint32_t FRACN)
{
  MODIFY_REG(RCC->PLL3FRACR, RCC_PLL3FRACR_PLL3FRACN, FRACN << RCC_PLL3FRACR_PLL3FRACN_Pos);
}

/**
  * @brief  Get PLL3 FRACN Coefficient
  * @rmtoll PLL3FRACR      PLL3FRACN          LL_RCC_PLL3_GetFRACN
  * @retval A value between 0 and 8191 (0x1FFF)
  */
__STATIC_INLINE uint32_t LL_RCC_PLL3_GetFRACN(void)
{
  return (uint32_t)(READ_BIT(RCC->PLL3FRACR, RCC_PLL3FRACR_PLL3FRACN) >>  RCC_PLL3FRACR_PLL3FRACN_Pos);
}

/**
  * @brief  Set PLL3 VCO Input Range
  * @note   This API shall be called only when PLL3 is disabled.
  * @rmtoll PLL3CFGR        PLL3RGE       LL_RCC_PLL3_SetVCOInputRange
  * @param  InputRange This parameter can be one of the following values:
  *         @arg @ref LL_RCC_PLLINPUTRANGE_4_8
  *         @arg @ref LL_RCC_PLLINPUTRANGE_8_16
  * @retval None
  */
__STATIC_INLINE void LL_RCC_PLL3_SetVCOInputRange(uint32_t InputRange)
{
  MODIFY_REG(RCC->PLL3CFGR, RCC_PLL3CFGR_PLL3RGE, InputRange);
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_PRIV Privileged mode
  * @{
  */

#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
/**
  * @brief  Enable Secure Privileged mode
  * @rmtoll PRIVCFGR       SPRIV         LL_RCC_EnableSecPrivilegedMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableSecPrivilegedMode(void)
{
  SET_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_SPRIV);
}

/**
  * @brief  Disable Secure Privileged mode
  * @rmtoll PRIVCFGR           SPRIV          LL_RCC_DisableSecPrivilegedMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableSecPrivilegedMode(void)
{
  CLEAR_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_SPRIV);
}

#endif /* __ARM_FEATURE_CMSE && (__ARM_FEATURE_CMSE == 3U) */

/**
  * @brief  Check if Secure Privileged mode has been enabled or not
  * @rmtoll PRIVCFGR           SPRIV          LL_RCC_IsEnabledSecPrivilegedMode
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledSecPrivilegedMode(void)
{
  return ((READ_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_SPRIV) == RCC_PRIVCFGR_SPRIV) ? 1UL : 0UL);
}

/**
  * @brief  Enable Non Secure Privileged mode
  * @rmtoll PRIVCFGR       NSPRIV        LL_RCC_EnableNSecPrivilegedMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableNSecPrivilegedMode(void)
{
  SET_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_NSPRIV);
}

/**
  * @brief  Disable Non Secure Privileged mode
  * @rmtoll PRIVCFGR           NSPRIV          LL_RCC_DisableNSecPrivilegedMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableNSecPrivilegedMode(void)
{
  CLEAR_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_NSPRIV);
}

/**
  * @brief  Check if Non Secure Privileged mode has been enabled or not
  * @rmtoll PRIVCFGR           NSPRIV          LL_RCC_IsEnabledNSecPrivilegedMode
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledNSecPrivilegedMode(void)
{
  return ((READ_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_NSPRIV) == RCC_PRIVCFGR_NSPRIV) ? 1UL : 0UL);
}


/**
  * @brief  Enable privileged mode
  * @note   User should use LL_RCC_EnableSecPrivilegedMode() to enable Secure privilege
  *         User should use LL_RCC_EnableNSecPrivilegedMode() to enable Non-secure privilege
  *         This API is kept for legacy purpose only
  * @rmtoll PRIVCFGR       SPRIV         LL_RCC_EnablePrivilegedMode
  * @rmtoll PRIVCFGR       NSPRIV        LL_RCC_EnablePrivilegedMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnablePrivilegedMode(void)
{
#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
  SET_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_SPRIV);
#else
  SET_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_NSPRIV);
#endif /* __ARM_FEATURE_CMSE && (__ARM_FEATURE_CMSE == 3U) */
}

/**
  * @brief  Disable Privileged mode
  * @note   User should use LL_RCC_DisableSecPrivilegedMode() to disable Secure privilege
  *         User should use LL_RCC_DisableNSecPrivilegedMode() to disable Non-secure privilege
  *         This API is kept for legacy purpose only
  * @rmtoll CR           PRIV          LL_RCC_DisablePrivilegedMode
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisablePrivilegedMode(void)
{
#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
  CLEAR_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_SPRIV);
#else
  CLEAR_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_NSPRIV);
#endif /* __ARM_FEATURE_CMSE && (__ARM_FEATURE_CMSE == 3U) */
}

/**
  * @brief  Check if Privileged mode has been enabled or not
  * @note   User should use LL_RCC_IsEnabledSecPrivilegedMode() to check Secure privilege setting
  *         User should use LL_RCC_IsEnabledNSecPrivilegedMode() to check Non-secure privilege setting
  *         This API is kept for legacy purpose only
  * @rmtoll CR           PRIV          LL_RCC_IsEnabledPrivilegedMode
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledPrivilegedMode(void)
{
#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
  return ((READ_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_SPRIV) == RCC_PRIVCFGR_SPRIV) ? 1UL : 0UL);
#else
  return ((READ_BIT(RCC->PRIVCFGR, RCC_PRIVCFGR_NSPRIV) == RCC_PRIVCFGR_NSPRIV) ? 1UL : 0UL);
#endif /* __ARM_FEATURE_CMSE && (__ARM_FEATURE_CMSE == 3U) */
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management
  * @{
  */

/**
  * @brief  Clear LSI ready interrupt flag
  * @rmtoll CICR         LSIRDYC       LL_RCC_ClearFlag_LSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC);
}

/**
  * @brief  Clear LSE ready interrupt flag
  * @rmtoll CICR         LSERDYC       LL_RCC_ClearFlag_LSERDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_LSERDYC);
}

/**
  * @brief  Clear MSI ready interrupt flag
  * @rmtoll CICR         MSISRDYC       LL_RCC_ClearFlag_MSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_MSIRDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_MSISRDYC);
}

/**
  * @brief  Clear HSI ready interrupt flag
  * @rmtoll CICR         HSIRDYC       LL_RCC_ClearFlag_HSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC);
}

/**
  * @brief  Clear HSE ready interrupt flag
  * @rmtoll CICR         HSERDYC       LL_RCC_ClearFlag_HSERDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_HSERDYC);
}


/**
  * @brief  Clear HSI48 ready interrupt flag
  * @rmtoll CICR          HSI48RDYC     LL_RCC_ClearFlag_HSI48RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC);
}

/**
  * @brief  Clear PLL1 ready interrupt flag
  * @rmtoll CICR         PLL1RDYC       LL_RCC_ClearFlag_PLL1RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_PLL1RDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_PLL1RDYC);
}

/**
  * @brief  Clear PLL2 ready interrupt flag
  * @rmtoll CICR         PLL2RDYC       LL_RCC_ClearFlag_PLL2RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_PLL2RDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_PLL2RDYC);
}

/**
  * @brief  Clear PLL3 ready interrupt flag
  * @rmtoll CICR         PLL3RDYC       LL_RCC_ClearFlag_PLL3RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_PLL3RDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_PLL3RDYC);
}

/**
  * @brief  Clear Clock security system interrupt flag
  * @rmtoll CICR         CSSC          LL_RCC_ClearFlag_HSECSS
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_CSSC);
}

/**
  * @brief  Clear MSIK ready interrupt flag
  * @rmtoll CICR         MSIKRDYC       LL_RCC_ClearFlag_MSIKRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearFlag_MSIKRDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_MSIKRDYC);
}

/**
  * @brief  Clear SHSI ready interrupt flag
  * @rmtoll CICR         SHSIRDYC       LL_RCC_ClearFlag_SHSIRDY
  * @retval None
  */
#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
__STATIC_INLINE void LL_RCC_ClearFlag_SHSIRDY(void)
{
  SET_BIT(RCC->CICR, RCC_CICR_SHSIRDYC);
}
#endif /*(__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)*/


/**
  * @brief  Check if LSI ready interrupt occurred or not
  * @rmtoll CIFR         LSIRDYF       LL_RCC_IsActiveFlag_LSIRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == RCC_CIFR_LSIRDYF) ? 1UL : 0UL);
}

/**
  * @brief  Check if LSE ready interrupt occurred or not
  * @rmtoll CIFR         LSERDYF       LL_RCC_IsActiveFlag_LSERDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == RCC_CIFR_LSERDYF) ? 1UL : 0UL);
}

/**
  * @brief  Check if MSI ready interrupt occurred or not
  * @rmtoll CIFR         MSISRDYF       LL_RCC_IsActiveFlag_MSIRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_MSIRDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_MSISRDYF) == RCC_CIFR_MSISRDYF) ? 1UL : 0UL);
}

/**
  * @brief  Check if HSI ready interrupt occurred or not
  * @rmtoll CIFR         HSIRDYF       LL_RCC_IsActiveFlag_HSIRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == RCC_CIFR_HSIRDYF) ? 1UL : 0UL);
}

/**
  * @brief  Check if HSE ready interrupt occurred or not
  * @rmtoll CIFR         HSERDYF       LL_RCC_IsActiveFlag_HSERDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == RCC_CIFR_HSERDYF) ? 1UL : 0UL);
}

/**
  * @brief  Check if HSI48 ready interrupt occurred or not
  * @rmtoll CIFR         HSI48RDYF     LL_RCC_IsActiveFlag_HSI48RDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == RCC_CIFR_HSI48RDYF) ? 1UL : 0UL);
}
/**
  * @brief  Check if PLL1 ready interrupt occurred or not
  * @rmtoll CIFR         PLL1RDYF       LL_RCC_IsActiveFlag_PLL1RDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL1RDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL1RDYF) == RCC_CIFR_PLL1RDYF) ? 1UL : 0UL);
}

/**
  * @brief  Check if PLL2 ready interrupt occurred or not
  * @rmtoll CIFR         PLL2RDYF       LL_RCC_IsActiveFlag_PLL2RDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL2RDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL2RDYF) == RCC_CIFR_PLL2RDYF) ? 1UL : 0UL);
}

/**
  * @brief  Check if PLL3 ready interrupt occurred or not
  * @rmtoll CIFR         PLL3RDYF       LL_RCC_IsActiveFlag_PLL3RDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL3RDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL3RDYF) == RCC_CIFR_PLL3RDYF) ? 1UL : 0UL);
}

/**
  * @brief  Check if Clock security system interrupt occurred or not
  * @rmtoll CIFR         CSSF          LL_RCC_IsActiveFlag_HSECSS
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_CSSF) == RCC_CIFR_CSSF) ? 1UL : 0UL);
}

/**
  * @brief  Check if Clock security system interrupt occurred or not
  * @rmtoll CIFR         MSIKRDYF          LL_RCC_IsActiveFlag_MSIKRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_MSIKRDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_MSIKRDYF) == RCC_CIFR_MSIKRDYF) ? 1UL : 0UL);
}

#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
/**
  * @brief  Check if Clock security system interrupt occurred or not
  * @rmtoll CIFR         SHSIRDYF          LL_RCC_IsActiveFlag_SHSIRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SHSIRDY(void)
{
  return ((READ_BIT(RCC->CIFR, RCC_CIFR_SHSIRDYF) == RCC_CIFR_SHSIRDYF) ? 1UL : 0UL);
}
#endif /*(__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)*/

/**
  * @brief  Check if RCC flag Independent Watchdog reset is set or not.
  * @rmtoll CSR          IWDGRSTF      LL_RCC_IsActiveFlag_IWDGRST
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void)
{
  return ((READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == RCC_CSR_IWDGRSTF) ? 1UL : 0UL);
}

/**
  * @brief  Check if RCC flag Low Power reset is set or not.
  * @rmtoll CSR          LPWRRSTF      LL_RCC_IsActiveFlag_LPWRRST
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void)
{
  return ((READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == RCC_CSR_LPWRRSTF) ? 1UL : 0UL);
}

/**
  * @brief  Check if RCC flag is set or not.
  * @rmtoll CSR          OBLRSTF       LL_RCC_IsActiveFlag_OBLRST
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void)
{
  return ((READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == RCC_CSR_OBLRSTF) ? 1UL : 0UL);
}

/**
  * @brief  Check if RCC flag Pin reset is set or not.
  * @rmtoll CSR          PINRSTF       LL_RCC_IsActiveFlag_PINRST
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void)
{
  return ((READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == RCC_CSR_PINRSTF) ? 1UL : 0UL);
}

/**
  * @brief  Check if RCC flag Software reset is set or not.
  * @rmtoll CSR          SFTRSTF       LL_RCC_IsActiveFlag_SFTRST
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void)
{
  return ((READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == RCC_CSR_SFTRSTF) ? 1UL : 0UL);
}

/**
  * @brief  Check if RCC flag Window Watchdog reset is set or not.
  * @rmtoll CSR          WWDGRSTF      LL_RCC_IsActiveFlag_WWDGRST
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void)
{
  return ((READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == RCC_CSR_WWDGRSTF) ? 1UL : 0UL);
}

/**
  * @brief  Check if RCC flag BOR reset is set or not.
  * @rmtoll CSR          BORRSTF       LL_RCC_IsActiveFlag_BORRST
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void)
{
  return ((READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == RCC_CSR_BORRSTF) ? 1UL : 0UL);
}

/**
  * @brief  Set RMVF bit to clear the reset flags.
  * @rmtoll CSR          RMVF          LL_RCC_ClearResetFlags
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ClearResetFlags(void)
{
  SET_BIT(RCC->CSR, RCC_CSR_RMVF);
}

/**
  * @}
  */

/** @defgroup RCC_LL_EF_IT_Management IT Management
  * @{
  */

/**
  * @brief  Enable LSI ready interrupt
  * @rmtoll CIER         LSIRDYIE      LL_RCC_EnableIT_LSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE);
}

/**
  * @brief  Enable LSE ready interrupt
  * @rmtoll CIER         LSERDYIE      LL_RCC_EnableIT_LSERDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE);
}

/**
  * @brief  Enable MSI ready interrupt
  * @rmtoll CIER         MSIRDYIE      LL_RCC_EnableIT_MSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_MSIRDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_MSISRDYIE);
}

/**
  * @brief  Enable HSI ready interrupt
  * @rmtoll CIER         HSIRDYIE      LL_RCC_EnableIT_HSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE);
}

/**
  * @brief  Enable HSE ready interrupt
  * @rmtoll CIER         HSERDYIE      LL_RCC_EnableIT_HSERDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE);
}

/**
  * @brief  Enable HSI48 ready interrupt
  * @rmtoll CIER          HSI48RDYIE    LL_RCC_EnableIT_HSI48RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE);
}

/**
  * @brief  Enable PLL1 ready interrupt
  * @rmtoll CIER         PLL1RDYIE      LL_RCC_EnableIT_PLL1RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_PLL1RDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE);
}

/**
  * @brief  Enable PLL2 ready interrupt
  * @rmtoll CIER         PLL2RDYIE      LL_RCC_EnableIT_PLL2RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_PLL2RDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE);
}

/**
  * @brief  Enable PLL3 ready interrupt
  * @rmtoll CIER         PLL3RDYIE      LL_RCC_EnableIT_PLL3RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_PLL3RDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE);
}

/**
  * @brief  Enable MSIKRDYIE ready interrupt
  * @rmtoll CIER         MSIKRDYIE      LL_RCC_EnableIT_MSIKRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_MSIKRDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_MSIKRDYIE);
}

#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
/**
  * @brief  Enable SHSIRDYIE ready interrupt
  * @rmtoll CIER         SHSIRDYIE      LL_RCC_EnableIT_SHSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_EnableIT_SHSIRDY(void)
{
  SET_BIT(RCC->CIER, RCC_CIER_SHSIRDYIE);
}
#endif /*(__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)*/

/**
  * @brief  Disable LSI ready interrupt
  * @rmtoll CIER         LSIRDYIE      LL_RCC_DisableIT_LSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE);
}

/**
  * @brief  Disable LSE ready interrupt
  * @rmtoll CIER         LSERDYIE      LL_RCC_DisableIT_LSERDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE);
}

/**
  * @brief  Disable MSI ready interrupt
  * @rmtoll CIER         MSISRDYIE      LL_RCC_DisableIT_MSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_MSIRDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_MSISRDYIE);
}

/**
  * @brief  Disable HSI ready interrupt
  * @rmtoll CIER         HSIRDYIE      LL_RCC_DisableIT_HSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE);
}

/**
  * @brief  Disable HSE ready interrupt
  * @rmtoll CIER         HSERDYIE      LL_RCC_DisableIT_HSERDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE);
}

/**
  * @brief  Disable HSI48 ready interrupt
  * @rmtoll CIER          HSI48RDYIE    LL_RCC_DisableIT_HSI48RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE);
}

/**
  * @brief  Disable PLL1 ready interrupt
  * @rmtoll CIER         PLL1RDYIE      LL_RCC_DisableIT_PLL1RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_PLL1RDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE);
}

/**
  * @brief  Disable PLL2 ready interrupt
  * @rmtoll CIER         PLL2RDYIE      LL_RCC_DisableIT_PLL2RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_PLL2RDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE);
}

/**
  * @brief  Disable PLL3 ready interrupt
  * @rmtoll CIER         PLL3RDYIE      LL_RCC_DisableIT_PLL3RDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_PLL3RDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE);
}

/**
  * @brief  Disable MSIKRDYIE ready interrupt
  * @rmtoll CIER         MSIKRDYIE      LL_RCC_DisableIT_MSIKRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_MSIKRDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_MSIKRDYIE);
}

#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
/**
  * @brief  Disable SHSIRDYIE ready interrupt
  * @rmtoll CIER         SHSIRDYIE      LL_RCC_DisableIT_SHSIRDY
  * @retval None
  */
__STATIC_INLINE void LL_RCC_DisableIT_SHSIRDY(void)
{
  CLEAR_BIT(RCC->CIER, RCC_CIER_SHSIRDYIE);
}
#endif /*(__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)*/

/**
  * @brief  Checks if LSI ready interrupt source is enabled or disabled.
  * @rmtoll CIER         LSIRDYIE      LL_RCC_IsEnabledIT_LSIRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == RCC_CIER_LSIRDYIE) ? 1UL : 0UL);
}

/**
  * @brief  Checks if LSE ready interrupt source is enabled or disabled.
  * @rmtoll CIER         LSERDYIE      LL_RCC_IsEnabledIT_LSERDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == RCC_CIER_LSERDYIE) ? 1UL : 0UL);
}

/**
  * @brief  Checks if MSI ready interrupt source is enabled or disabled.
  * @rmtoll CIER         MSIRDYIE      LL_RCC_IsEnabledIT_MSIRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_MSIRDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_MSISRDYIE) == RCC_CIER_MSISRDYIE) ? 1UL : 0UL);
}

/**
  * @brief  Checks if HSI ready interrupt source is enabled or disabled.
  * @rmtoll CIER         HSIRDYIE      LL_RCC_IsEnabledIT_HSIRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == RCC_CIER_HSIRDYIE) ? 1UL : 0UL);
}

/**
  * @brief  Checks if HSE ready interrupt source is enabled or disabled.
  * @rmtoll CIER         HSERDYIE      LL_RCC_IsEnabledIT_HSERDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == RCC_CIER_HSERDYIE) ? 1UL : 0UL);
}

/**
  * @brief  Checks if HSI48 ready interrupt source is enabled or disabled.
  * @rmtoll CIER          HSI48RDYIE    LL_RCC_IsEnabledIT_HSI48RDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == RCC_CIER_HSI48RDYIE) ? 1UL : 0UL);
}
/**
  * @brief  Checks if PLL1 ready interrupt source is enabled or disabled.
  * @rmtoll CIER         PLL1RDYIE      LL_RCC_IsEnabledIT_PLL1RDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLL1RDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE) == RCC_CIER_PLL1RDYIE) ? 1UL : 0UL);
}

/**
  * @brief  Checks if PLL2 ready interrupt source is enabled or disabled.
  * @rmtoll CIER         PLL2RDYIE      LL_RCC_IsEnabledIT_PLL2RDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLL2RDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE) == RCC_CIER_PLL2RDYIE) ? 1UL : 0UL);
}

/**
  * @brief  Checks if PLL3 ready interrupt source is enabled or disabled.
  * @rmtoll CIER         PLL3RDYIE      LL_RCC_IsEnabledIT_PLL3RDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLL3RDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE) == RCC_CIER_PLL3RDYIE) ? 1UL : 0UL);
}

/**
  * @brief  Checks if MSIK ready interrupt source is enabled or disabled.
  * @rmtoll CIER         MSIKRDYIE       LL_RCC_IsEnabledIT_MSIKRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_MSIKRDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_MSIKRDYIE) == RCC_CIER_MSIKRDYIE) ? 1UL : 0UL);
}

#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
/**
  * @brief  Checks if SHSI ready interrupt source is enabled or disabled.
  * @rmtoll CIER         SHSIRDYIE      LL_RCC_IsEnabledIT_SHSIRDY
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_SHSIRDY(void)
{
  return ((READ_BIT(RCC->CIER, RCC_CIER_SHSIRDYIE) == RCC_CIER_SHSIRDYIE) ? 1UL : 0UL);
}
#endif /*(__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)*/

/**
  * @}
  */

/** @defgroup RCC_LL_EF_Security_Services Security Services
  * @{
  */

#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
/**
  * @brief  Configure RCC resources security
  * @note Only available from secure state when system implements security (TZEN=1)
  * @rmtoll SECCFGR     HSISEC        LL_RCC_ConfigSecure\n
  *         SECCFGR     HSESEC        LL_RCC_ConfigSecure\n
  *         SECCFGR     MSISEC        LL_RCC_ConfigSecure\n
  *         SECCFGR     LSISEC        LL_RCC_ConfigSecure\n
  *         SECCFGR     LSESEC        LL_RCC_ConfigSecure\n
  *         SECCFGR     SYSCLKSEC     LL_RCC_ConfigSecure\n
  *         SECCFGR     PRESCSEC      LL_RCC_ConfigSecure\n
  *         SECCFGR     PLL1SEC       LL_RCC_ConfigSecure\n
  *         SECCFGR     PLL2SEC       LL_RCC_ConfigSecure\n
  *         SECCFGR     PLL3SEC       LL_RCC_ConfigSecure\n
  *         SECCFGR     CLK48MSEC     LL_RCC_ConfigSecure\n
  *         SECCFGR     HSI48SEC      LL_RCC_ConfigSecure\n
  *         SECCFGR     RMVFSEC       LL_RCC_ConfigSecure
  * @param  SecureConfig This parameter can be one or a combination of the following values:
  *         @arg @ref LL_RCC_ALL_NSEC & LL_RCC_ALL_SEC
  *         @arg @ref LL_RCC_HSI_SEC & LL_RCC_HSI_NSEC
  *         @arg @ref LL_RCC_HSE_SEC & LL_RCC_HSE_NSEC
  *         @arg @ref LL_RCC_MSI_SEC & LL_RCC_MSI_NSEC
  *         @arg @ref LL_RCC_LSE_SEC & LL_RCC_LSE_NSEC
  *         @arg @ref LL_RCC_LSI_SEC & LL_RCC_LSI_NSEC
  *         @arg @ref LL_RCC_SYSCLK_SEC & LL_RCC_SYSCLK_NSEC
  *         @arg @ref LL_RCC_PRESCALERS_SEC & LL_RCC_PRESCALERS_NSEC
  *         @arg @ref LL_RCC_PLL1_SEC & LL_RCC_PLL1_NSEC
  *         @arg @ref LL_RCC_PLL2_SEC & LL_RCC_PLL2_NSEC
  *         @arg @ref LL_RCC_PLL3_SEC & LL_RCC_PLL3_NSEC
  *         @arg @ref LL_RCC_CLK48M_SEC & LL_RCC_CLK48M_NSEC
  *         @arg @ref LL_RCC_HSI48_SEC & LL_RCC_HSI48_NSEC
  *         @arg @ref LL_RCC_RESET_FLAGS_SEC & LL_RCC_RESET_FLAGS_NSEC
  * @retval None
  */
__STATIC_INLINE void LL_RCC_ConfigSecure(uint32_t SecureConfig)
{
  WRITE_REG(RCC->SECCFGR, SecureConfig);
}
#endif /* __ARM_FEATURE_CMSE && (__ARM_FEATURE_CMSE == 3U) */

/**
  * @brief  Get RCC resources security status
  * @note Only available from secure state when system implements security (TZEN=1)
  * @rmtoll SECCFGR     HSISEC        LL_RCC_GetConfigSecure\n
  *         SECCFGR     HSESEC        LL_RCC_GetConfigSecure\n
  *         SECCFGR     MSISEC        LL_RCC_GetConfigSecure\n
  *         SECCFGR     LSISEC        LL_RCC_GetConfigSecure\n
  *         SECCFGR     LSESEC        LL_RCC_GetConfigSecure\n
  *         SECCFGR     SYSCLKSEC     LL_RCC_GetConfigSecure\n
  *         SECCFGR     PRESCSEC      LL_RCC_GetConfigSecure\n
  *         SECCFGR     PLL1SEC       LL_RCC_GetConfigSecure\n
  *         SECCFGR     PLL2SEC       LL_RCC_GetConfigSecure\n
  *         SECCFGR     PLL3SEC       LL_RCC_GetConfigSecure\n
  *         SECCFGR     CLK48MSEC     LL_RCC_GetConfigSecure\n
  *         SECCFGR     HSI48SEC      LL_RCC_GetConfigSecure\n
  *         SECCFGR     RMVFSEC       LL_RCC_GetConfigSecure
  * @retval Returned value can be one or a combination of the following values:
  *         @arg @ref LL_RCC_ALL_NSEC & LL_RCC_ALL_SEC
  *         @arg @ref LL_RCC_HSI_SEC & LL_RCC_HSI_NSEC
  *         @arg @ref LL_RCC_HSE_SEC & LL_RCC_HSE_NSEC
  *         @arg @ref LL_RCC_MSI_SEC & LL_RCC_MSI_NSEC
  *         @arg @ref LL_RCC_LSE_SEC & LL_RCC_LSE_NSEC
  *         @arg @ref LL_RCC_LSI_SEC & LL_RCC_LSI_NSEC
  *         @arg @ref LL_RCC_SYSCLK_SEC & LL_RCC_SYSCLK_NSEC
  *         @arg @ref LL_RCC_PRESCALERS_SEC & LL_RCC_PRESCALERS_NSEC
  *         @arg @ref LL_RCC_PLL1_SEC & LL_RCC_PLL1_NSEC
  *         @arg @ref LL_RCC_PLL2_SEC & LL_RCC_PLL2_NSEC
  *         @arg @ref LL_RCC_PLL3_SEC & LL_RCC_PLL3_NSEC
  *         @arg @ref LL_RCC_CLK48M_SEC & LL_RCC_CLK48M_NSEC
  *         @arg @ref LL_RCC_HSI48_SEC & LL_RCC_HSI48_NSEC
  *         @arg @ref LL_RCC_RESET_FLAGS_SEC & LL_RCC_RESET_FLAGS_NSEC
  * @retval None
  */
__STATIC_INLINE uint32_t LL_RCC_GetConfigSecure(void)
{
  return (uint32_t)(READ_BIT(RCC->SECCFGR, RCC_SECURE_MASK));
}

/**
  * @}
  */

#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RCC_LL_EF_Init De-initialization function
  * @{
  */
ErrorStatus LL_RCC_DeInit(void);
/**
  * @}
  */

/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions
  * @{
  */
void        LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks);
uint32_t    LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource);
uint32_t    LL_RCC_GetUARTClockFreq(uint32_t UARTxSource);
uint32_t    LL_RCC_GetI2CClockFreq(uint32_t I2CxSource);
uint32_t    LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource);
uint32_t    LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource);
uint32_t    LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource);
uint32_t    LL_RCC_GetSAIClockFreq(uint32_t SAIxSource);
uint32_t    LL_RCC_GetSDMMCKernelClockFreq(uint32_t SDMMCxSource);
uint32_t    LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource);
uint32_t    LL_RCC_GetRNGClockFreq(uint32_t RNGxSource);
uint32_t    LL_RCC_GetUSBClockFreq(uint32_t USBxSource);
uint32_t    LL_RCC_GetADCDACClockFreq(uint32_t ADCxSource);
uint32_t    LL_RCC_GetADF1ClockFreq(uint32_t ADF1Source);
uint32_t    LL_RCC_GetMDF1ClockFreq(uint32_t MDF1Source);
uint32_t    LL_RCC_GetDAC1ClockFreq(uint32_t DAC1Source);
uint32_t    LL_RCC_GetOCTOSPIClockFreq(uint32_t OCTOSPIxSource);
#if defined(SAES)
uint32_t    LL_RCC_GetSAESClockFreq(uint32_t SAESxSource);
#endif /* SAES */
uint32_t    LL_RCC_GetSPIClockFreq(uint32_t SPIxSource);
#if defined(DSI)
uint32_t    LL_RCC_GetDSIClockFreq(uint32_t DSIxSource);
#endif /* DSI */
#if defined(HSPI1)
uint32_t    LL_RCC_GetHSPIClockFreq(uint32_t HSPIxSource);
#endif /* HSPI1 */
#if defined(LTDC)
uint32_t    LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource);
#endif /* defined(LTDC) */
/**
  * @}
  */

#endif /* USE_FULL_LL_DRIVER */

/**
  * @}
  */

/**
  * @}
  */

#endif /* defined(RCC) */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* STM32u5xx_LL_RCC_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/