/** ****************************************************************************** * @file stm32l5xx_hal_timebase_rtc_wakeup_template.c * @author MCD Application Team * @brief HAL time base based on the hardware RTC_WAKEUP Template. * * This file overrides the native HAL time base functions (defined as weak) * to use the RTC WAKEUP for the time base generation: * + Initializes the RTC peripheral and configures the wakeup timer to be * incremented each 1ms when uwTickFreq is set to default value, else * 10 ms or 100 ms, depending of above global variable value. * + HAL_IncTick is called inside the HAL_RTCEx_WakeUpTimerEventCallback * + HSE (default), LSE or LSI can be selected as RTC clock source * ****************************************************************************** * @attention * * Copyright (c) 2019 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] This file must be copied to the application folder and modified as follows: (#) Rename it to 'stm32l5xx_hal_timebase_rtc_wakeup.c' (#) Add this file and the RTC HAL drivers to your project and uncomment HAL_RTC_MODULE_ENABLED define in stm32l5xx_hal_conf.h @endverbatim ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32l5xx_hal.h" /** @addtogroup STM32L5xx_HAL_Driver * @{ */ /** @defgroup HAL_TimeBase_RTC_WakeUp_Template HAL TimeBase RTC WakeUp Template * @{ */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Uncomment the line below to select the appropriate RTC Clock source for your application: + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing precision. + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing precision. */ #define RTC_CLOCK_SOURCE_HSE /* #define RTC_CLOCK_SOURCE_LSE */ /* #define RTC_CLOCK_SOURCE_LSI */ #ifdef RTC_CLOCK_SOURCE_HSE #define RTC_ASYNCH_PREDIV 99U #define RTC_SYNCH_PREDIV 4U #else /* RTC_CLOCK_SOURCE_LSE || RTC_CLOCK_SOURCE_LSI */ #define RTC_ASYNCH_PREDIV 31U #define RTC_SYNCH_PREDIV 0U #endif /* RTC_CLOCK_SOURCE_HSE */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ RTC_HandleTypeDef hRTC_Handle = {.Init = {0}}; /* Private function prototypes -----------------------------------------------*/ void RTC_IRQHandler(void); /* Private functions ---------------------------------------------------------*/ /** * @brief This function configures the RTC wakeup timer as a time base source. * The time source is configured to have 1ms time base with a dedicated * Tick interrupt priority. * Wakeup Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK = 1ms * Wakeup Time = WakeupTimebase * WakeUpCounter (0 + 1) = 1 ms * @note This function is called automatically at the beginning of program after * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). * @param TickPriority Tick interrupt priority. * @retval HAL status */ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) { HAL_StatusTypeDef status; __IO uint32_t counter = 0U; RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/ if ((uint32_t)uwTickFreq != 0U) { #ifdef RTC_CLOCK_SOURCE_LSE /* Configure LSE as RTC clock source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; RCC_OscInitStruct.LSEState = RCC_LSE_ON_RTC_ONLY; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; #elif defined (RTC_CLOCK_SOURCE_LSI) /* Configure LSI as RTC clock source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; RCC_OscInitStruct.LSIState = RCC_LSI_ON; RCC_OscInitStruct.LSIDiv = RCC_LSI_DIV1; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; #elif defined (RTC_CLOCK_SOURCE_HSE) /* Configure HSE as RTC clock source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV32; #else #error Please select the RTC Clock source #endif /* RTC_CLOCK_SOURCE_LSE */ status = HAL_RCC_OscConfig(&RCC_OscInitStruct); if(status == HAL_OK) { PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); /* Enable RTC Clock */ if(status == HAL_OK) { /* Enable RTC Clock */ __HAL_RCC_RTC_ENABLE(); __HAL_RCC_RTCAPB_CLK_ENABLE(); /* The time base should be 1ms Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK HSE as RTC clock Time base = ((99 + 1) * (4 + 1)) / 500kHz = 1ms LSE as RTC clock Time base = ((31 + 1) * (0 + 1)) / 32.768kHz = ~1ms LSI as RTC clock Time base = ((31 + 1) * (0 + 1)) / 32kHz = 1ms */ hRTC_Handle.Instance = RTC; hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; status = HAL_RTC_Init(&hRTC_Handle); if(status == HAL_OK) { /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); /* Disable the Wake-up Timer */ __HAL_RTC_WAKEUPTIMER_DISABLE(&hRTC_Handle); /* In case of interrupt mode is used, the interrupt source must disabled */ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); /* Wait till RTC WUTWF flag is set */ while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(&hRTC_Handle, RTC_FLAG_WUTWF) == 0U) { counter++; if (counter == (SystemCoreClock / 56U)) { status = HAL_ERROR; break; } } if(status == HAL_OK) { /* Clear PWR wake up Flag */ __HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU); /* Clear RTC Wake Up timer Flag */ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_WUTF); /* Configure the Wake-up Timer counter */ hRTC_Handle.Instance->WUTR = 0U; /* Clear the Wake-up Timer clock source bits in CR register */ hRTC_Handle.Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; /* Configure the clock source */ hRTC_Handle.Instance->CR |= (uint32_t)RTC_WAKEUPCLOCK_CK_SPRE_16BITS; /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT(); /* Configure the Interrupt in the RTC_CR register */ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); /* Enable the Wake-up Timer */ __HAL_RTC_WAKEUPTIMER_ENABLE(&hRTC_Handle); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); HAL_NVIC_EnableIRQ(RTC_IRQn); /* Configure the SysTick IRQ priority */ if (TickPriority < (1UL << __NVIC_PRIO_BITS)) { HAL_NVIC_SetPriority(RTC_IRQn, TickPriority, 0U); uwTickPrio = TickPriority; } else { status = HAL_ERROR; } } } } } } else { status = HAL_ERROR; } return status; } /** * @brief Suspend Tick increment. * @note Disable the tick increment by disabling RTC interrupt. * @retval None */ void HAL_SuspendTick(void) { /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); /* Disable RTC WAKE UP TIMER Interrupt */ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); } /** * @brief Resume Tick increment. * @note Enable the tick increment by enabling RTC interrupt. * @retval None */ void HAL_ResumeTick(void) { /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); /* Enable RTC WAKE UP TIMER interrupt */ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); } /** * @brief Wake Up Timer Event Callback in non blocking mode * @note This function is called when RTC interrupt took place, inside * RTC_IRQHandler(). It makes a direct call to HAL_IncTick() to increment * a global variable "uwTick" used as application time base. * @param hrtc : RTC handle * @retval None */ void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); HAL_IncTick(); } /** * @brief This function handles RTC WAKE UP TIMER interrupt request. * @retval None */ void RTC_IRQHandler(void) { HAL_RTCEx_WakeUpTimerIRQHandler(&hRTC_Handle); } /** * @} */ /** * @} */